Scribd
Upload
163 views6 pages

MP Req

The document lists 18 proposed items including microcontroller trainer kits, interface boards, and other electronics equipment along with their estimated unit rates and amounts. Key items include 8085, 8086, and 8051 microprocessor trainer kits, an embedded system development board, a barcode scanner trainer, an ATM trainer, and interface boards for PIC microcontrollers. A universal programmer is also included that can program microcontrollers from various manufacturers via USB or parallel port connection.

Uploaded by

Sri Krishna
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
163 views6 pages

MP Req

The document lists 18 proposed items including microcontroller trainer kits, interface boards, and other electronics equipment along with their estimated unit rates and amounts. Key items include 8085, 8086, and 8051 microprocessor trainer kits, an embedded system development board, a barcode scanner trainer, an ATM trainer, and interface boards for PIC microcontrollers. A universal programmer is also included that can program microcontrollers from various manufacturers via USB or parallel port connection.

Uploaded by

Sri Krishna
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 6

Sl No.

Proposed Item

Quantity Required

1.

8085 MicroProcessor Trainer Kit, Instruction manual

Estimated Estimated UnitRate Amount (Rs. in (Rs.in Lacs) Lacs ) 0.08

Specifications

2.

8086 Microprocessor Trainer kit User Manual

0.09

CPU : 8085 @ 3.702 MHZ Speed. ROM : 16 KB expandable up to 128 KB. RAM : 64K. Expandable up to 128K. Parallel I/O: 48 I/O Lines. Timer : 3 Programmable Interval Timers. Serial I/O.: One 8251 Serial Port Provided.. Keyboard: 32 Keys Keyboard. On board Battery back-up, RS232C cable, windows based Driver software Built-in Assembler, DisAssembler, Text editor. Bus Expansion through 26 Core FRC cable. 5V, 3Amps SMPS Power supply and Users Manuals CPU : 8086 @ 8 MHZ Speed. EPROM : 128 KB. Expandable up to 256KB. RAM. : 64 K. Expandable up to 128K. Key board. : 32 Keys keyboard. Programmable interrupt controller I/O Lines. : 48 I/O Lines On board 50 Pin RFC Connecters. Timer Signals. : Timer1 and Timer2 signals are brought out to Header Pins. On board Battery back-up Provided. RS-232C cable, windows based Driver software Built-in Assembler, DisAssembler, Text editor. Bus Expansion through 26 Core FRC cable. Power Supply. 5V, 3Amps SMPS Power supply ,

user manual 3.

4.

8255 Interfacing Kit, Instruction manual 8051 Micro Controller Trainer kit

0.1 0.15 CPU : 8051 @ 11.0592 MHZ Speed. EPROM : 128 KB. Expandable up to 256KB. RAM. : 64 K. Expandable up to 128K. Key board. : 36 Keys keyboard. Programmable interrupt controller I/O Lines. : 48 I/O Lines On board 50 Pin RFC Connecters, On board Battery back-up. RS-232C cable, windows based Driver software. Built-in Assembler, DisAssembler, Text editor. Bus Expansion through 26 Core FRC cable. Printer Interface using 25 Pin D type Connector. Buffered bus signals through ribbon cable connector for easy system expansion Power supply 5V, 3Amps SMPS Power supply, user manual LPC2148 microcontroller with 512 KB Flash Program memory 32+8KB SRAM 12Mhz crystal, On-chip two 10 bit ADC capable of providing 14 analog input channels, On-chip USB 2.0 Port On-Board USB to UART bridge connected to CPU-UART0 for ISP UART1 terminated at standard 9 pin D type connector 8 LEDs connected to Port lines One 8 way DIP Switch, 4 x 4 Matrix Keypad One 16X2 Alpha-numeric LCD,

5.

89C51 Microcontroller trainer kit, Instruction manual

0.1

6.

Embedded System Base Module for Basic Embedded Experiment and practice/Embedded Development Board

0.5

7.

Bar Code Scanning Technology Trainer(NV4001)

0.39

One Potentiometer to set the analog input to ADC One 16Kbits Serial EEPROM Single digit 7segment display connected to CPU I2C port, Two digit 7 Segment display connected to CPU IO Port CPU - RTC Crystal 32.768Khz with battery backup One Temperature sensor connected to ADC channel On-chip DAC terminated in Port lines terminated in 26pin FRC for external interface boards Standard JTAG port for emulator / programming Built-in Power Supply and user manuals Onboard 40 pin NXP p89V51RD2 or eq. and 20 pin Atmel 89C2051 or eq. MCU Interfaces Buffered I/O, standard 8 key keypad, 4 x 3 matrix keypad, RS232 port, 16 x 2 LCD, 7 segment display, ADC, DAC CD containing free software IDEs, assemblers, simulators and User manuals Power Supply : +5 V DC provided from computer by PS/2 Interfacing Current : 100 mA (while scanning) Scan-Rate : 100 Scans per second (Typical) Scanning distance : 0 to 30 mm Standards Supports : UPC/EAN, UPC/EAN with supplemental, UCC/EAN 128, Code 39, Code 39 Full ASCII, Code 39 Tri Optic, Code 128, Code 128 Full ASCII, Codabar, Interleaved 2/5

ATM Trainer (NV4002)


8.

0.198

Digital Handy cam


9.

0.6

ADC/DAC interfacing kit


10.

0.1

11.

Stepper motor interfacing kit

0.12

Interface supported : PS/2 Ambient Light Immunity : Immune to direct exposure of normal office and factory lighting conditions, as well as direct exposure to sunlight. Dimension (mm) : W 365 D 265 H 120 Weight : 1.2 Kg (approx) Input : 6 V DC Display : 16 2 Characters LCD Microcontroller : PIC16F877A , PIC16F84A PC-Interface : RS - 232 (DB-9) Key Matrix : 4 3 Dimension (mm) : W 355 D 260 H 125 Weight : 1.5 Kg (approx.) Camcorder with 10x Optical Zoom (Includes Handy cam Station) bit ADC/DAC interfacing with the above microcontrollers Single stepping and free running modes of operation with speed variation and direction reversal. Torque: 2.8 Kg-cm Step angle: 1.8 Power: 12V, 1A/phase

12. 13. 14.

15.

Traffic lights Interface. Elevator Interface. Temperature Controller Interface. Universal CPLD-FPGA Kit. Universal adapter model PIC microcontrollerkit

0.45

0.25

16.

7 segment display.16DIP s/ws. LCD interface. 4MHz crystal clock oscillator. Serial interfacesRS232,RS485.Power supplies 5V,3.3V,2.5V,1.8V,1.5V 16F877 PIC Microcontroller. On Board ICD Compatible. On Board Serial Port to Communicate with PC Operates on 4 MHZ Crystal Frequency. Provision to Connect Keypad,

Elevator, Display, ADC, DAC, 8-bit 16 Channel ADC, Logic controller, Tone generator, Stepper motor, Opto Isolated input/output card, Relay output, DC Motor, RTD Interfaces. On board 6 digit 7 segment Display. On board 10 bit, 16.47 s, 8 channel ADC from 16F877 MCU. Operating Speed: DC 20MHZ Clock input. DC: 200ns instruction cycle. Eight level deep Hardware stack, Power on Reset, Power up timer and Oscillator start-up Timer, Watching Timer, Programmable Code Protection, Power Saving SLEEP MODE, In circuit serial Programming via two Pins. Processor read/write access to Program, Power Supply and IDE Software. User Manual

17

Interface Boards of PIC Controllers:


1.QVGA Graphics PICtail Plus Daughter Board with 3.2 Display Kit 2. MRF24J40MA 2.4 GHz RF PICtail Plus Daughter Card 3. IrDA PICtail Plus Daughter Card. 4. IrDA PICtail Plus Daughter Card. Requires 2 x Explorer 16 (100pin) Dev Boards. 2 x dsPIC33FJ256GP710 PIMs.. 2 x 9V Power Adapters. 5.Ethernet PICtail Plus Daughter Card. 6. USB PICtail Plus Daughter Card. With PIM -MA240014).

7. CAN/LIN PICtail / PICtail Plus Daughter Card.

Universal Programmer
18.

0.3

It should have compatible zip socket.It must be able to connect using USB & PC via parallel port. Programmer should support programming of microcontrollers from ATMEL, AVR, Microchip PIC, Philips & EPROM, EEPROM, FLASH, & Serial EEPROM, Programmer software.

You might also like