Scribd Logo
Upload

Welcome to Scribd!

  • 172 views

    BR Matacryl RB - GB

    Uploaded by

    Nevena Delibasic

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    BR Matacryl RB - GB

    Uploaded by

    Nevena Delibasic
    172 views4 pages

    Original Title

    BR Matacryl RB_GB

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    172 views4 pages

    BR Matacryl RB - GB

    Uploaded by

    Nevena Delibasic

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    MATACRYL RB

    High Technology Seamless Liquid Waterproofing for Railway Bridges

    REDUCED POSSESSION UNDER EXTREME CONDITIONS!

    RPM/Belgium N.V.
    An Company

    Alteco Technik GmbH

    Matacryl RB

    A Flexible Seamless Liquid Waterproofing System for Railways + ballast

    Superior Waterproofing Essential


    Concrete not always in compliance with Specifications viz Absorption, Porosity & Permeability Bottom of the barrel Systems selected on Price only, often fail to deliver in terms of Performance Damage often occurs to cheap membranes by third parties and other trades during Construction Similarly, damage may also occur to the Waterproofing when the Protection Boards are being installed Chloride Ion ingress may compromise Structural integrity of Concrete or Steel Decks

    Superior Performance Criteria


    Very few limitations for installation at varying temperatures Rapid Setting and Curing minimises costly Possession & facilitates almost immediate use Non absorbent and Impermeable Tenacious Bond to Concrete and Steel surfaces Resists indentation by ballast Crack Bridging even at below sub zero temperatures Chemical (fusion) bonding between subsequent Coatings minimises chances of any debonding Seamless Protection Lower densities on flexural members Quicker installation than conventional asphalt/HRA applications Easily repaired where applicable Complies with AREMA Ballast Indentation Certification

    Installation Benefits
    Cold applied and does not require heating or conditioning Available in both Hand and Spray applied grades (MATACRYL MANUAL membrane only) Available in both Horizontal and Vertical Grades VOC compliant and contains no solvent Reduced application times between Coats and layers Rapid installation and handover to Client / User Only requires 3mm dry film thickness ( d.f.t ) applied in one or two Coats Variety of Primers to suit each exposure Chemically inert and not requiring Hazmat precautions when disposing of Rain resistant within 30 minutes of application Setting and Curing times may be adjusted to suit ambient and site conditions No Protection Boards or additional Alternative Protective Layers ( APL ) required Limited manpower required Insignificant amount of equipment and plant required

    A.R.E.M.A. Ballast Indentation Approval

    System Build Up Bridge Decks under Ballast


    Membrane under ballast

    1. 2. 3. 4.

    Matacryl Primer + natural quartz Matacryl Membrane Layer Matacryl Membrane Layer, second coat Matacryl STC (optional) broadcasted with quartz sand

    Note: Matacryl STC (optional) is only used if the membrane layer stays exposed for several weeks to UV.

    MATACRYL Membrane
    Physical Properties
    Dynamic puncture resistance under railway ballast

    Engineering Properties
    Value
    Meets specification of no rupture of the membrane after 2 million loading cycles Passes 3,4 MPa - rupture in concrete At 23C: 2.4 mm thickness - 8 mm At 0C: 2.1 mm thickness - 6.5 mm At -20C: 2.7 mm thickness - 8.8 mm At 0.5 mm I3 At 1.5 mm I4 At 0.5 mm L3 At 1.5 mm L4 23.3 % 60 IRHD (1 hour after application) 85 IRHD (3 hours after application) 55.7 mg after 500 turns 63.9 mg after 1000 turns 24 MPa / 107% elongation 0 blisters at 2.5 BAR

    Test Method
    SNCF Method

    Test Institute
    SNCF (French Railways) Laboratoire, Vitry-sur-Seine

    Indentation under ballast Adhesion to concrete

    A.R.E.M.A. Method N FP 98 282

    A.R.E.M.A., US CETE Laboratoire, France

    Crack-bridging capacity

    BPG fr Beschichtungen

    Techn. University Munich, Germany

    Dynamic puncture resistance

    ETAG 005 Part 1 No. 5, 3, 3, 2, 2 TR 000 ETAG 005 Part 1 No. 5, 3, 3, 2, 2 TR 007 DIN 53512 N FP 98 285

    Polymer Institute, Germany

    Static puncture resistance

    Polymer Institute, Germany

    Rebound elasticity Shore A-Hardness

    Polymer Institute, Germany CETE Laboratoire, France

    Taber abrasion, load 1000 gr. Roll CS 10 Tensile strength at -20C Negative side hydrostatic pressure test Crack bridging capability Shear strength Chloride ion ingress

    ISO 7784-2

    Polymer Institute, Germany

    ISO 527 Taylor Woodrow no. 7166

    Polymer Institute, Germany Taylor Woodrow, England

    VTT 2632

    VTT, Finland

    Average of 5.58 at -30C > 0.65 N/mm2 Maximum increase in chloride ion concentration not more than 0.04% No cracks in the membrane

    BBA Method

    BBA (British Board of Agrment)

    Crack cycling at -10C, 23C, 40C

    BBA Method

    BBA

    This brochure is not intended to establish product recommendations for any installation. To the best of our knowledge the information contained herein is true and accurate at the time of issue, but is subject to change without prior notice. No part of this brochure may be copied without written authorisation of RPM/Belgium N.V. - RPM/Belgium N.V.

    Authorised applicator:
    RPM/Belgium N V - 10/2009 - Doc 283/GB

    Warranty RPM/Belgium N.V. and Alteco Technik GmbH warrant all goods to be free from defects and will replace materials proven to be defective. The given information corresponds to our present standard of knowledge. However, it is the buyers responsibility to determine the suitability of the products in individual cases by conducting own tests.

    RPM/Belgium N.V. and Alteco Technik GmbH are subsidiaries of RPM Inc., USA, a public owned American company and are leading manufacturers of industrial flooring systems, coatings, sealants and membranes. RPM/Belgium N.V. and Alteco Technik GmbH are certified by Lloyds to the ISO 9001 quality standard.

    RPM/Belgium N.V.
    Industriepark Noord H. Dunantstraat 11B B-8700 Tielt Tel.: + 32 (0) 51 / 40 38 01 Fax: + 32 (0) 51 / 40 55 90 E-mail: [email protected] http://www.rpm-belgium.be

    Alteco Technik GmbH


    Raiffeisenstrae 16 D-27239 Twistringen Tel.: + 49 (0) 42 43 / 92 95 0 Fax: + 49 (0) 42 43 / 33 22 E-mail: [email protected] http://www.alteco-technik.de

    You might also like