Ar 721H
Ar 721H
Ar 721H
system. Effectively control who (card user) can enter where (door group) at what time (time zone) using what method (card and/or pin).
Highly optimized and simpler design made Basic system to be most affordable best value PC based access control system in market.
Controller is built in with reader for easier installation, lesser wiring and overall lower maintenance cost. Modern contemporary design can match any decoration.
Software has clean GUI and optimized to provide practical function instead of crowded with unnecessary features. This make our software easier to learn, simpler to use and easier to be assist by technical support. Our software is simpler enough for small company and yet powerful enough to cater the needs of big organization.
42 U102435 0052147895
Time attendance
Flexible multi shift system automate clocking report to review total work time, break time and overtime of staff. No more long hours of manual calculation. Lateness, early out, long lunch and absenteeism report allow you to monitor staff punctuality and improve company efficiency.
External alarm will sound off and notify software if door is forced open or left open too long. Alarm can be armed / disarmed by password. Extra value added feature.
CCTV integration
Camera can capture picture for every in and out as visual evidence. This greatly enhances the effectiveness of access control and accuracy of attendance clocking.
AR721H is a single door controller with built-in RF reader. AR721H can work standalone (1024 users) or connect to AR716 multi-door controller (15K users). During AR716 failure, AR721H will auto switch to standalone mode and continue to run as a secondary system. Generally, AR721H is installed inside as EXIT reader while AR721U is installed outside as ENTRY reader.
AR721H specification
Built-in-operation mode Card User Event Memory Time zone / holiday Anti-passback Alarm (tamper,force entry & door open too long) Elevator control Direct PC software Multi reader networking with AR716E Access mode Access pin number format Wiegand port Push button input Alarm sensor input Door output (dry contact) Alarm output (open collector) Reader RF frequency Reading range Data communication Power consumption Dimension, weight M4 1024 1200 11 / 120 YES YES 1024 users, 32 floor YES YES M6 65,536 NONE NONE NONE NONE NONE NONE NONE M8 1024 1200 11 / 120 YES YES 1024 users, 32 floor YES YES
Single door 1024 card users local anti-passback Multi door, 15,000 card users, global anti-passback
Card only, Card or pin, Card and pin 5 digit user num + Public pin User pin 4 digit pin 4 digit 4 digit 1 input port (selectable WG 26 or 34) 1 negative trigger input 1 negative trigger input 0.1-600 sec N.O / N.C, max 24V-1A 0.1-600 sec, active low output 125KHz or Mifare 13.56MHz approx 10cm (4 inch) RS485-9600 bps (N,8,1) 9-16V, less than 3W 111(h) x 77(w) x 26(d) mm, 210 gram
AR727CM 485-TCPIP
Standalone connection
Power supply 12V RS485 data interface Connect to AR716 or PC Alarm output Tamper switch output Connect to external system Door lock output Connect to EM Lock, barrier, turnstile and etc... Wiegand reader
Ordering Info
EM 125KHz Mifare 13.56MHz 721H, 721U 721H_1356, 721U_1356