Scribd
Upload
718 views

Openfoam Model Snappyhexmesh Tutorial

openfoam model snappyhexMesh tutorial

Uploaded by

jdj2007
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
718 views

Openfoam Model Snappyhexmesh Tutorial

openfoam model snappyhexMesh tutorial

Uploaded by

jdj2007
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 23

Mesh Generation in OpenFoam with SnappyHexMesh

An User Experience
Organization:

1st OpenFOAM Users' Meeting - Brazil December 3rd 2010 @ LCFT-ITA So Jos do Campos SP Brazil

Team Members:

Dr. Guilherme Araujo Lima da Silva Dr. Marcos Noboru Arima Francisco Domingues de Sousa

ATS4i Aero-thermal Solutions for Industry So Paulo SP Brazil*

(*) This presentation is based only in user experience and it is not approved or endorsed by the producers of the OpenFOAM software.

Introduction Run blockMesh STL Body Geometry Run snappyHexMesh Conclusions

Objectives

Introduce some OpenFoam mesh generation strategies; Present snappyHexMesh to audience; Transfer knowledge acquired by ATS4i; Discuss results;

Presentation focus

Very quick overview due to time constraint Use of the software only Mesh generations with open source tools This is not a manual or user guide

Mesh Generation in OpenFoam

Open Source Tools Used


BlockMesh SnappyHexMesh EnGrid (Gmesh+Netgen+prisms)

Commercial Tools Used


Metacomp's MIME export to cgns cgnsToFoam and autoPatch

EnGrid
(Gmesh+Netgen+Prisms)

MIME+cgnsToFoam+
autoPatch

blockMesh

Edit BlockMeshDict Run blockMesh pyFoamDisplayBlockMesh

The STL file goes in triSurface directory

STL Geometry

STL Geometry Tips


Check the quality of the STL file. The surface needs to be as smooth as possible, without any humps. Check the orientation of the STL file. Are the coordinate axes aligned correctly? Check the position of the STL file. Is the origin of the STL file located, where it is supposed to be? Check the scaling of the STL file. Guess Check the format of the STL file. It should be ASCII and not binary. You can have multiple surface groups in your STL file, but the naming should be without whitespaces, such as

Correct Scaling and Origin

EnGrid or Paraview may help you fixing STL geometry

snappyHexMesh

Define the surface to be loaded from triSurface directory

Define refinement region

Define surface refinement min and max levels

Define refinement level in region selected

Define location in Mesh. It must be inside the volume to be meshed (here outside the body) Paraview may help you to find the coordinates!!!

Define Layers

Recommendations

Pay attention to scaling and origin of STL file Quality of STL file may be an issue also Visualize STL file Visualize blockMesh and try to make it balanced 1:1:1 Change one parameter per time in snappyHexMeshDict Take care because the layers will not grow if it is inconsistent or distorts to much the mesh (quality control) Use caution when defining the refinement levels because they are exponents! So level 2 is 2^2, level 3 is 2^3....

Table of Contents

Introduction

Review

Testing

Conclusions

Contact

Guilherme Araujo Lima da Silva, Dr.


[email protected]

Table of Contents

Introduction

Review

Testing

Conclusions

Acknowledgments
Jens H. / Shipbuilding Student / 1984 / windsurfer, owner of http://www.hydroniumion.de/category/openfoam/ - great tutorials there! The team acknowledges to Prof. Marcelo Lemos and ITA organization for the opportunity;

Thank you !

You might also like