3116 Engine

The six-cylinder, turbocharged engine is built for power, reliability and economy.

Powerful performance. The 950F Series II performs at full-rated gross power of 134 kW (180 hp). The fourstroke cycle design delivers long power strokes and efficient fuel combustion. The turbocharged and aftercooled Caterpillar 3116 engine is precisely engineered and stringently tested to maintain a tradition of quality. It does it all with profitboosting performance, heavy duty durability and reliability, built-in serviceability and excellent fuel economy.

1 Turbocharger enhances performance and engine efficiency, especially at high altitudes. 2 Crankshaft is forged and induction hardened for long-term durability. 3 Individual, high-pressure unit injectors atomize fuel efficiently for economy and low emissions. 4 Deep skirt designed block 5 Low mounted oil pump 6 Ferous aluminum 2 piece articulated pistons 7 Camshaft roller followers 8 Jacket water aftercooled
s

Modular radiator cools efficiently. Grill swings out for easy repair or installation of individual modules, and sight gauge allows for quick check of coolant level. Easy maintenance. The engine can be rebuilt for a second life. Caterpillar remanufactured parts are available to economically replace many components. Some innovative maintenance features of the 3116 engine: Parent-metal cylinder block can be rebored twice and dry-sleeved. Connecting rods can be removed through the tops of the cylinders. Camshaft followers and pushrods can be easily replaced without removing the camshaft. Water pump can be serviced as a unit or rebuilt.

Power Train
The Cat power train makes dependable performance a standard feature.

1 Heavy duty axles and brakes are designed to last in all kinds of operating conditions. Planetary final drives use full-floating bronze sleeve bearings in the planet gears and differential pinion. Oil-disc brakes are adjustment free and fully enclosed to lock out contaminants. Patented Duo-Cone Seals between the axle shafts and housings keep lubrication in and dirt out. Oscillating rear axle ensures four-wheel ground contact for traction and stability, even on rugged terrain.

2 Optional limited-slip differentials and NoSPIN rear differential are available to deliver maximum traction in severe ground conditions. Planetary power shift transmission with automatic shift capability allows on-the-go shifting, while hydraulic modulation cushions the shift and reduces stress on components. Large diameter, perimeter-mounted clutch plates are continuously oil-cooled for dependable, long life.

Transmission

Engine

Transfer gear

Brakes, differential & final drives

Frame and Loader Linkage

Superior construction means superior strength.

1 Full box-section frame absorbs shock and twisting forces while supporting rigid component alignment. 2 Spread-hitch design provides strength in the articulation area and reduces stress on the hitch pins and roller bearings. The use of castings in high stress areas distributes stress load better. 3 35 center-point articulation allows cycling in tight quarters. 4 Full four-plate loader tower provides rigid mounting for lift arms, resists stress and protects hydraulic cylinders and lines from damage by debris. 5 Lift arms are made of solid steel to stand up to any stress load.

6 Cast cross tube provides extra rigidity and maintains pin bore alignment. 7 Z-bar loader linkage gives the 950F Series II tremendous breakout force in all materials. The streamlined designwith fewer pivot points and sealing to maintain pin lubrication allows for longer maintenance intervals. Cast tilt lever and forged tilt link efficiently transmit high breakout forces from the tilt cylinder. Optional high lift design. An arrangement with longer lift arms and modified tilt cylinder is available for increased reach and dump clearance.

Double tapered roller bearings on both upper and lower hitch

Hydraulics
Powerful hydraulics are the invisible force behind the loaders muscle and flexibility.

High capacity lift. Quick hydraulics make it easy to lift heavy, full bucket loads. The bucket automatically returns to a preset lift height and digging angle, which ensures accuracy and cuts down on operator distractions. Smooth steering. Hydraulic steering system with dedicated pump has automotive-type feel for precise, comfortable control. Large-bore steering cylinders allow excellent maneuverability.

Automatic Ride Control. This Caterpillar system uses a nitrogen/oil accumulator in the hydraulic lift circuit that acts as a shock absorber. Automatic Ride Control System benefits include a more controlled ride, less dynamic stress on structures and components, reduced tire flexing and greater payload retention. Collectively these benefits contribute to improved operator efficiencies, lower operating costs and enhanced productivity.

1 Large-bore lift and tilt cylinders ensure efficient load handling. 2 Cat's XT-3 hydraulic hose is exceptionally strong and flexible. Reusable couplings prolong the hose assemblys life. O-Ring Face Seals (ORFS) provide positive, dry sealing.

1 Exceptional all-around visibility reduces strain and fatigue, making operators more productive. 2 Caterpillar Monitoring System with electronic analog gauges is a highly effective and reliable diagnostic system. As a warning system, it constantly checks machine functions and tells the operator when theres a problem. Easy-to-read gauges display fuel level, temperatures for coolant, transmission and hydraulic oil, alternator output, machine speed, engine RPM and gear range. Also displays hour meter, odometer and digital speedometer readings. As a diagnostic system, it identifies conditions, shows current readings and plays back readings registered during recent operations. 3 Automatic shift control allows the operator to concentrate on the work, not gear selection. Preset factory shift points ensure each shift occurs at optimum torque. A switch allows the operator to select either automatic or manual shifting. The low-effort shift control allows one-hand shifting for speed or directional changes. 4 Quick Gear Kickdown Button lets the operator easily downshift to a lower gear. It's a convenient way to downshift that saves time, increases bucket fill factors and lowers cycle times. 5 Steering column adjusts to multiple positions. The leather-like steering wheel and transmission control provide a sure grip and comfortable feel. The horn is conveniently located in the center of the steering wheel.

6 Transmission neutralizer lockout switch enables the left or right brake pedal to be used as a brake/neutralizer or brake only. Switch is on the right hand console. 7 Convenient low effort bucket controls allow for precise bucket loading and dumping. Optional third valve and control are available. 8 New Contour Series Seat is designed for comfort and support. Seat cushions reduce pressure on the lower back and thighs while allowing unrestricted arm and leg movement. 9 Built-in storage space is designed to hold cups, lunch box, thermos and personal items. 10 Repositioned vents throughout the cab keep fresh air flowing while improving the cabs heating, cooling, defrost and defog capability. Radio Ready means this cab includes 12-volt converter (2-amp), speakers, antenna, all wiring and brackets for entertainment or communications radio installation. Windshield washers/wipers are standard features on front and rear windows. Front wiper has intermittent speed capability and inthe-blade washer delivery system. Optional Payload Measurement System offers on-the-go weighing to assist operators in loading trucks more accurately.

Buckets
A choice of 12 buckets lets you tailor the machine to the job.

Rugged design. All buckets are built with shell-tine construction that resists twisting and distortion. Replaceable, bolt-on wear plates protect the bucket bottom. Patented Cat Corner Guard Cutting Edge System protects the corners for longterm wear. General purpose and rock buckets excellent for excavating, stockpiling and general purpose work - feature: 1 Bolt-on wear plates 2 Sloped floor 3 Straight, sharp side bar Penetration bucketsexcellent for site preparation work - feature: 4 Full-width backdrag edge 5 Fore/aft wear strips 6 Flat floor 7 Curved, sharp side bar

10

Complete Customer Support

When you buy a Cat machine, you also get Caterpillars total commitment to customer support.

Easy maintenance. In addition to the servicing features built into the engine (see page 4), the 950F Series II includes: Hinged doors for access to battery boxes. Diagnostic connector to analyze electrical functions quickly. Ground-level access to lubrication points. Hydraulic pressure taps for checking hydraulic pressures. Cat dealers are also available to help you manage your machine service. Ask about our preventive maintenance programs.

Parts availability. Most Cat parts are immediately available from any dealer. Cat dealers rely on our worldwide computer network to find parts instantly and minimize your machine downtime. Many components are economically available as Caterpillar Remanufactured parts. Flexible financing. Your dealer can arrange affordable financing for the entire Caterpillar line. Talk to your dealer to learn how terms can be structured to meet your cash flow requirements.

12

Engine
Four-stroke cycle, six cylinder 3116 turbocharged diesel engine.
Ratings at 2200 RPM
kW HP PS

Transmission
Planetary power shift transmission with four speeds forward and reverse.
Maximum travel speeds (standard 23.5-25 tires)
km/h MPH

Power rating conditions

s

Gross power Flywheel power DIN 70020 ISO 1585 ISO 3046-1 EEC 80/1269 ISO 9249
Dimensions

134 127 127 127 127 127

180 170 170 170 170 170

176

Bore Stroke Displacement

105 mm 127 mm 6.6 liters

4.13 in. 5.0 in. 403 cu in.

based on standard air conditions of 25 C (77 F) and 100 kPa (29.6" Hg) total barometer used 35 API, 16 C (60 F), gravity fuel fuel had LHV of 42780 kJ/kg (18,390 Btu/lb) when used at 30 C (86 F) fuel density of 838.9 g/L (7.001 lb/gal) flywheel power ratings are for engine equipped with fan, alternator, air cleaner, water pump, fuel pump, muffler, and lubricating oil pump no derating required up to 2300 m (7550 ft) altitude

Forward 1 2 3 4 Reverse 1 2 3 4
Features
s

7.4 13.3 23.1 38.7 8.2 14.7 25.5 42.7

4.6 8.3 14.4 24.0 5.1 9.1 15.8 26.5

Exhaust emissions The 3116 meets the following emissions requirements: s EEC JAN 1997 s US EPA JAN 1996 s Japan MOC APRIL 1997
g/kWh g/hp-hr

Features
s

Hydrocarbons (HC) Carbon monoxide (CO) Nitrogen oxides (NOx)

520

0.43 1.81 8.16

0.32 1.35 6.09

s s s

s s

Torque in LB-FT 480 440 400 220 180 140 100 0.40 0.30 1200 BSFC LB/BHPHR 1400 1600 1800 2000 Gross Net 2200 Power in Horsepower

direct-injection fuel system with individual adjustment-free unit injectors for cylinders 3-ring aluminum-alloy/forged steel 2 piece articulated pistons, camground, tapered and cooled by oil spray standard oil cooler tapered connecting rods uniflow cylinder head design with two alloy-steel valves per cylinder deep-skirted cast cylinder block induction-hardened, forged crankshaft oscillating roller-followers and short pushrods direct-electric 24-volt starting and charging system with 12-volt, 100 amp-hour batteries

s s

s s

single lever to control both speed and direction separate control to lock in neutral single-stage, single-phase torque converter automatic shift capability Quick Gear Kickdown Switch

Engine R.P.M.

950F Series II specifications

13

Axles
Fixed front, oscillating rear ( 13).
Features
s

Brakes
Meets the following standards: OSHA, SAE J1473 DEC84, ISO 3450-1985.
Service brake features
s

Final Drives
Planetary final drives consist of ring gears and planetary carrier assemblies.
Features
s

s s

maximum single-wheel rise and fall: 470 mm (18.5") differentials, enclosed brakes and final drives included threaded nuts to set bearing pre-load Duo-Cone Seals between axle and housing uses SAE 30W (oil change interval: 2000 hours or 1 year)

s s s

full hydraulic actuated, oil-disc brakes completely enclosed and sealed adjustment-free separate circuits for front and rear axles dual pedal braking system with left and right pedals that can be switched between brake/neutralizer and brake only

ring gears are pressed in and doweled to axle housings carrier assemblies include: planet gears with full-floating bronze sleeve bearings planet shafts retaining pins bearings sun gear shafts planetary carriers

Parking brake features

s s

mechanical, shoe-type brake mounted on drive shaft

Secondary brake features

s

Caterpillar Monitoring System alerts operator if brake oil pressure drops and automatically applies parking brake

Loader Hydraulic System

Open-centered, interrupted series system with full-flow filtering. System is completely sealed. Pilot-operated controls.
Implement system, vane-type pump Hydraulic cycle time

Output at 2280 RPM and 6890 kPa (1000 psi) with SAE 10W oil at 66 C (150 F) Relief valve setting Cylinders, double acting: lift, bore and stroke Cylinder, double acting: tilt, bore and stroke
Pilot system, vane-type pump

237 liters/min 20 700 kPa 152.4 x 751 mm 177.8 x 536 mm

63 gpm 3000 psi 6.00 x 29.7" 7.00 x 21.1"

Raise 6.6 Dump 2.2 Lower, empty, float down 3.0 Total 11.8 seconds
Features
s s

Output at 2280 RPM and 6890 kPa (1000 psi) with SAE 10W oil at 66 C (150 F) Relief valve setting

19.0 liters/min 2410 kPa

5 gpm 350 psi

s s

completely enclosed system low effort, pilot-operated controls full-flow filtering reusable couplings with O-Ring Face Seals

14

950F Series II specifications

Cab
Caterpillar cab and Rollover Protective Structure (ROPS) are standard in North America, Europe and Japan.
Features
s

Tires
Tubeless, nylon, loader design tires.
Choice of
s s s s s s s s s s s

Steering
Full hydraulic power steering.
Ratings

meets OSHA and MSHA limits for operator sound exposure with doors and windows closed (according to ANSI/SAE J1166 May90) ROPS meets the following criteria: SAE J394 SAE 1040 APR88 ISO 3471-1986 also meets the following criteria for Falling Objects Protective Structure: SAE J231 JAN81 ISO 3449-1984

23.5-25, 12 PR (L-2) standard 23.5-25, 16 PR (L-3) 23.5-R25 GP-2B(L-2/3) steel radial 23.5-R25 XHA (L-3) steel radial 20.5-25, 12 PR (L-2) 20.5-25, 16 PR (L-2) 20.5-25, 16 PR (L-3) 20.5-25, 20 PR (L-3) 20.5-R25 GP-2B (L-2/3) steel radial 20.5-R25 XGLA (L-2) steel radial 20.5-R25 XHA (L-3) steel radial

Minimum turning radius (over tire) 6419 mm (21'1") Steering angle, each direction 35 Hydraulic output at 2280 RPM and 6890 kPa (1000 psi) 146 liters/min (38 gpm) Relief valve setting 17 200 kPa (2495 psi)
Features
s s s s s

Note

Note

When properly installed and maintained, the cab offered by Caterpillar when tested with doors and windows closed according to ANSI/SAE J1166 MAY90, meets OSHA and MSHA requirements for operator sound exposure limits in effect at time of manufacture. The operator sound pressure level is 75 dB(A) when measured per ISO 6394 or 86/662/EEC.

In certain applications (such as load-andcarry work) the loaders productive capabilities might exceed the tires tonnes-km/h (ton-MPH) capabilities. Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

s s

center-point frame articulation hydraulic neutralizer steering stops dedicated hydraulic steering pump front and rear wheels track flow-amplified, open-center, pressurecompensated system steering-wheel operated metering pump controls flow to steering cylinders, adjustment-free full-flow filtering tilt-adjustable steering column

Bucket Controls
Pilot-operated lift and tilt circuits.
Lift circuit features
s

Service Refill Capacities

Liters Gallons

four positions: raise, hold, lower and float can adjust automatic kickout from horizontal to full lift

Tilt circuit features

s

three positions: tilt back, hold, and dump can adjust automatic bucket positioner to desired loading angle doesnt require visual spotting

Fuel tank 259 Cooling system 49 Crankcase 31 Transmission 34 Differentials and final drives front 36 rear 36 Hydraulic system (including tank) 153 Hydraulic tank 88

67 12.9 8.1 9.0 9.5 9.5 40.4 23.3

Controls
s s

two lever control standard three lever control optional

950F Series II specifications

15

Operation Specifications
General purpose bucket

Rated bucket capacity

m3 yd3

3.1 4.0 Bolt-on edges Teeth & segments 2.63 3.44 2811 111" 2765 9'1" 1244 4'1" 1693 5'7" 2582 8'6" 61 2.4" 7765 25'6" 5372 17'8" 13 889 45'7" 11 442 25,230 10 388 22,906 17 715 34,054 16 563 36,521

2.9 3.75 Teeth Bolt-on Teeth & edges segments 2.55 3.34 2777 109" 2842 9'4" 1165 3'10" 1652 5'5 2440 8'0" 66 2.6" 7649 25'2" 5314 17'5" 13 836 45'5" 11 509 25,377 10 460 23,064 14 960 32,980 16 451 36,274 2.49 3.26 2811 111" 2765 9'1" 1244 4'1" 1693 5'7" 2582 8'6" 61 2.4" 7765 25'6" 5314 17'5" 13 889 45'7" 11 461 25,272 10 408 22,950 17 715 34,054 16 543 36,477

2.7 3.5 Teeth Bolt-on edges 2.34 3.06 2777 109" 2906 9'6" 1118 3'8" 1635 5'4" 2358 7'9" 66 2.6" 7567 24'10" 5247 17'3" 13 794 45'3" 11 647 25,682 10 592 23,355 16 052 35,388 16 402 36,166 Teeth & segments 2.28 2.98 2811 111" 2830 9'3" 1198 3'11" 1680 5'6" 2500 8'3" 61 2.4" 7683 25'2" 5247 17'3" 13 847 45'5" 11 613 25,607 10 553 23,269 16 636 36,675 16 494 36,369

Struck capacity Width Dump clearance at full lift and 45 discharge**** Reach at full lift and 45 discharge**** Reach at 45 discharge and 2130 mm (7 ft 0 in) clearance Reach with lift arms horizontal and bucket level Digging depth Overall length**** Overall height with bucket at full raise Loader clearance circle with bucket in carry position Static tipping load straight** Static tipping load full 35 turn** Breakout force*** Operating weight**

m3 yd3 mm in mm ft/in mm ft/in mm ft/in mm ft/in mm in mm ft/in mm ft/in mm ft/in kg lb kg lb kg lb kg lb

2.70 3.53 2777 109" 2842 9'4" 1165 3'10" 1652 5'5" 2440 8'0" 66 2.6" 7649 25'2" 5372 17'8" 13 836 45'5" 11 492 25,340 10 443 23,027 14 960 32,980 16 470 36,316

2.53 3.31 2811 111" 2765 9'1" 1244 4'1" 1693 5'7" 2582 8'6" 36 1.4" 7765 25'6" 5314 17'5" 13 889 45'7" 11 656 25,701 10 669 23,525 16 242 35,807 16 408 36,180

2.19 2.86 2811 111" 2830 9'3" 1198 3'11" 1680 5'6" 2500 8'3" 36 1.4" 7683 25'2" 5247 17'3" 13 847 45'5" 11 880 26,195 10 813 23,843 17 315 38,173 16 340 36,030

* All buckets shown can be used on high lift arrangement. High lift column shows changes in specifications from standard lift to high lift. Add or subtract as indicated to or from specifications given for appropriate bucket to calculate high lift specifications. ** Static tipping load and operating weight shown include sound-suppression cab and ROPS, 23.5-25 tires, full fuel tank, coolant, lubricants and operator. *** Measured 102 mm (4.0"): behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732c. **** Dump clearance, reach and overall length dimensions for bucket equipped with teeth reflect actual dimensions. SAE J732C allows dimensions for bucket with teeth to reflect the dimensions using the cutting edge. Caterpillar Inc. uses actual equipped bucket dimensions.

16

950F Series ll specifications

Typical material densities-loose

Penetration bucket 2.9 3.75 Teeth Rock bucket High Lift Arrangement* same same Teeth & segments 2.31 3.02 2815 111 2661 8'9" 1351 4'5" 1743 5'9" 2694 8'10" 36 1.4 7936 26'0" 5338 17'6" 13 905 45'7" 11 741 25,889 10 672 23,532 14 610 32,208 16 445 36,261 same same same same +558 +22.0" +25 +1.0" +462 +18.2" +425 +16.7" +25 +1.0 +525 +20.7" +558 +22.0" +237 +9.3" -850 -1874 -935 -2062 -878 -1935 +210 +463
kg/m3 lb/yd3

Basalt Bauxite, Kaolin Clay natural bed dry wet Clay and gravel dry wet Decomposed rock 75% rock, 25% earth 50% rock, 50% earth 25% rock, 75% earth Earth dry, packed wet, excavated Granite broken Gravel pitrun dry dry, 6-50 mm (.2-2) wet, 6-50 mm (.2-2) Gypsum broken crushed Limestone broken crushed Sand dry, loose damp wet Sand and clay loose

1960 1420 1660 1480 1660 1420 1540 1960 1720 1570 1510 1600 1660 1930 1510 1690 2020 1810 1600 1540 1540 1420 1690 1840 1600 1720 2020 1510 1250 1750 1600

3300 2394 2799 2495 2799 2394 2596 3305 2900 2647 2546 2698 2799 3254 2546 2849 3406 3052 2698 2596 2596 2394 2849 3102 2698 2900 3406 2546 2107 2950 2698

2.7 3.5 Bolt-on edges 2.32 3.03 2815 111 2820 9'3" 1222 4'0" 1699 5'7" 2493 8'2" 66 2.6 7702 25'3" 5338 17'6" 13 894 45'7" 11 630 25,644 10 563 23,291 14 610 32,208 16 514 36,413

2.53 3.31 2825 111 2709 8'11" 1189 3'11" 1610 5'3" 2488 8'2" 36 1.4 7661 25'2" 5363 17'7" 13 822 45'9" 11 568 25,507 10 509 23,172 16 271 35,870 16 514 36,413

Bucket Size Selector

Bucket size
yd3 3.25 3.5 3.75 4.0 m3 2.5 2.7 2.9 3.1 1300 1400 1500 1600 1700 1800 1900 2000 2100

Sand and gravel dry wet Sandstone Shale Slag broken Stone crushed

kg/m3 lb/yd3

2300

2300

2400

2500

2600

2700

2800

2900

3000

3100

3200

3300

3400

Material density

Under utilized Optimum Maximum load

3500

950F Series II specifications

17

Dimensions
All dimensions are approximate

3400 mm (11' 2") 2315 mm (7' 7")

Tread width for all tires 2090 mm (82")

Width over tires mm inches Ground clearance mm inches Change in vertical dimensions mm inches

23.5-25, 12 PR (L-2) standard 23.5-25, 16 PR (L-3) 23.5-R25 GP-2B (L-2/3) steel radial 23.5-R25 XHA (L-3) steel radial 20.5-25, 12 PR (L-2) 20.5-25, 16 PR (L-2) 20.5-25, 16 PR (L-3) 20.5-25, 20 PR (L-3) 20.5-R25 GP-2B (L-2/3) steel radial 20.5-R25 XHA (L-3) steel radial 20.5-R25 XGLA (L-2) steel radial

2753 2749 2756 2761 2684 2684 2675 2675 2672 2676 2683

108.4 108.2 108.5 108.7 105.6 105.6 105.3 105.3 105.2 105.4 105.6

474 474 474 460 394 394 423 423 406 402 393

18.7 18.7 18.7 18.1 15.5 15.5 16.7 16.7 16.0 15.8 15.5

Supplemental Specifications
Change in Operating weight kg lb Change in Articulated Static Tipping Load kg lb

Remove cab only, ROPS remains 23.5X25 L-3 16PR 23.5-R25, GP-2B (L-2/3) steel radial 23.5-R25 XHA, (L-3) steel radial 20.5-25, 12 PR (L-2) 20.5-25, 16 PR (L-2) 20.5-25, 16 PR (L-3) 20.5-R25, GP-2B (L-2/3) steel radial 20.5-R25, XHA (L-3) steel radial 20.5-R25 XGLA (L-2) steel radial Tire ballast 20.5-25 bias ply tires Tire ballast 23.5-25 bias ply tires

-177 +171 +325 +409 -598 -574 -431 -406 -364 -536 +819 +1171

-390 +377 +715 +902 -1319 -1266 -950 -893 -803 -1182 +1806 +2582

-134 +109 +207 +260 -380 -402 -365 -274 -231 -341 +1070 +1533

18

950F Series II specifications

Dimensions vary with bucket. Refer to operating specifications chart on page 16.

793 mm (2' 7")

754 mm (2' 6") 1840 mm (6' 0")

818 mm 1590 mm (2' 8") (5' 3") 3180 mm (10' 5")

463 mm (1' 6")

*High Lift: 4512 mm (14'10")

-16 -80 -80 -51 -51 -68 -72 -81

-0.62 -3.1 -3.1 -2.0 -2.0 -2.7 -2.8 -3.19

-295 +240 +456 +573 -838 -884 -805 -604 -510 -751 +2354 +3373

Note: Tire options include tires and rims.

3270 mm (10' 9")

3953 mm (13' 0")

45 40

Standard Equipment
Standard and optional equipment may vary. Consult your Caterpillar dealer for specifics. Air intake heater Alternator (50-amp) Automatic bucket positioner Automatic lift kickout Back up alarm Batteries (two 12-volt, 100 amp-hour) Brake system (service, parking, secondary) Cab with sound suppression, canopy and rollover protective structure (ROPS) Caterpillar Monitoring System * Coolers: (engine oil, hydraulic oil and transmission oil) Counterweight Diagnostic connector Drawbar hitch pin Engine enclosure, locking Fenders, front and rear Fuel priming aid Gauges (coolant, transmisson oil and hydraulic oil temperatures, fuel level, tachometer, speedometer and gear range indicator) Heater/defroster/pressurizer Horn, steering wheel mounted Indicators (engine air filter and clock hour meter) Key (single key for cab and access doors) Lights (front and rear), Halogen Lock (hydraulic implement control levers) Muffler Precleaner, air intake Radiator, multi-row modular Radio ready, 2-amp converter Rearview mirrors, interior Seat, suspension (fully adjustable) Seat belt, retractable, 75 mm (3) wide Sight gauge (for engine coolant and hydraulic tank) Starting and charging system (24-volt) Tires (23.5-25) 12 PR (L-2) Transmission neutralizer on/off switch Vandalism protection caplocks Windshield washers/wipers (front and rear), front intermittent *Functions analyzed by Caterpillar Monitoring System Category I: Alternator and fuel level Category II: Coolant, hydraulic oil and transmission oil temperatures Category III: Engine oil and brake oil pressures, parking brake engaged, supplemental steering if so equipped, low hydraulic oil level indicator.

Optional Equipment
With approximate changes in operating weights.
kg lb kg lb

Air conditioning 73 Axle seal guards 85 Buckets Cab removed, ROPS remains -177 Differentials: NoSPIN 1 Limited Slip 5 Fender Extension Package Field installed attachments: Guard, crankcase Guard, power train Engine coolant heater, 120-volt, 220-volt Lighting system, warning (rotating beacon) Mirrors, outside mounted Emergency starting receptacle Radio, AM/FM cassette in fixed mounting or quick release versions Voltage converter, 5-amp, 15-25 amp

161 187 see page 16 -390 2 11

Guards: Crankcase Power train High ambient cooling package High lift arrangement Hydraulic arrangement, three valve Logging arrangement Mirrors, outside mounted Payload Measurement System Ride Control System Seat, air suspension Signal lights, directional Starting aids Engine coolant heater, 120-volt Ether starting aid Receptacle, 120-volt, 220-volt 1.4 Steering, supplemental Tires

66 98 48 830 93 93 28 26 91 32 10

146 217 106 1830 205 205 62 57 200 71 22

1.4 3 1 2 3 7 122 268 see pages 15 & 18

950F Series II specifications

19