Scribd Logo
Upload

Welcome to Scribd!

  • 17 views

    Elrctrobloting Procedure

    Uploaded by

    Shiv Kumar
    Wet PVDF membrane with methanol for a few seconds. Then transfer the PVDF membrane from the methanol to a dish containing 1x electroblotting transfer buffer and keeps for 5 minutes. Remove gel for the electrophoresis cell and soak in electroblotting buffer (above the fiber pad) for 15 minutes.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Elrctrobloting Procedure

    Uploaded by

    Shiv Kumar
    17 views1 page
    Wet PVDF membrane with methanol for a few seconds. Then transfer the PVDF membrane from the methanol to a dish containing 1x electroblotting transfer buffer and keeps for 5 minutes. Remove gel for the electrophoresis cell and soak in electroblotting buffer (above the fiber pad) for 15 minutes.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Wet PVDF membrane with methanol for a few seconds. Then transfer the PVDF membrane from the methanol to a dish containing 1x electroblotting transfer buffer and keeps for 5 minutes. Remove gel for the electrophoresis cell and soak in electroblotting buffer (above the fiber pad) for 15 minutes.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    17 views1 page

    Elrctrobloting Procedure

    Uploaded by

    Shiv Kumar
    Wet PVDF membrane with methanol for a few seconds. Then transfer the PVDF membrane from the methanol to a dish containing 1x electroblotting transfer buffer and keeps for 5 minutes. Remove gel for the electrophoresis cell and soak in electroblotting buffer (above the fiber pad) for 15 minutes.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Electroblotting (Procedure) : Molecular Biology Virtual Lab II : Biotech...

    http://amrita.vlab.co.in/?sub=3&brch=186&sim=701&cnt=2

    Home . .

    Project

    Videos

    Workshop

    Nodal Centers

    News & Events

    Forum

    Contact us

    Login . .

    you are here->home->biotechnology and biomedical engineering->molecular biology virtual lab ii->electroblotting

    Electroblotting
    Theory Procedure Self Evaluation Animation Assignment Reference Feedback

    .....

    Materials Required
    1 electroblotting transfer buffe, Polyacrylamide gel containing proteins of interest, 100% methanol, Powder-free gloves, Test tube, Electro blotting apparatus, PVDF transfer membrane, Fiber pad, Whatman no. 1 filter paper, Trays, Magnetic Stirrer, Power supply.

    Procedure
    1. Wet PVDF with Methanol for a few seconds. 2. Then transfer the PVDF membrane from the methanol to a dish containing 1x electroblotting transfer buffer and keeps for 5 minutes. 3. Dip two pieces of filter paper in 1x Electroblotting transfer buffer (above the PVDF membrane). 4. Soak the fiber pads in blotting buffer. 5. Remove gel for the electrophoresis cell and soak in Electroblotting buffer (above the fiber pad) for 15 minutes. ..... 6. Then assemble the transblott unit. 7. For that Place the opened gel holder cassette on a clean, flat surface. Place one transfer bufferwetted fiber pad on the top surface, followed by the filter paper. 8. Place the gel face down on the support, so that the cut edge is now on the right-handside. 9. Remove wet PVDF membrane from the tray containing transfer buffer and place above the gel. Roll a test tube across the membrane avoid air bubbles between membrane and gel. 10. Place the other wetted filter paper above the PVDF membrane. 11. Place the other fiber pad on top of the membrane and close the holder. 12. Slide the assembled transfer cassette into the tank with the gel on the cathode side and the membrane on the anode side. 13. Place the Electroblotting apparatus above the magnetic stirrer. Drop the stir bar. 14. Fill the transfer tank with 1 transfer buffer so that the buffer completely covers theElectrode panels but does not touch the electrical connectors. 15. Turn on the Magnetic stirrer. Assemble the sandwich and electroblot at either constant voltage of 50Volts at room temp. for 30 minutes or constant current of 500 mA for the same amount of time. 16. At the end of the transfer period, turn off the power and disconnect the power supply. Open the transfer sandwich and remove the membrane and gel. Thoroughly rinse the membrane with high-purity water, three times, 5 min each. to .....

    Copyright @ 2013 Under the NME ICT initiative of MHRD


    Like 1,033 people like this.

    Powered by Amrita Virtual Lab Collaborative Platform [ Ver 0.2.70 ]

    1 of 1

    1/25/2013 4:43 PM

    You might also like