C850 Compact QUAD OTDR With QUAD OLS and OPM

C850 Compact QUAD OTDR with QUAD OLS and OPM
The NOYES C850 Certification OTDR from AFL combines ease of use (Touch and Test) and multiple functionality in a handheld test set designed for testing and inspecting multimode and single-mode fibers. The C850 integrates an OTDR with Optical Light Sources (OLS), an Optical Power Meter (OPM), Visible Fault Locator (VFL) and inspection capability for testing and troubleshooting enterprise networks. OTDR Auto modes, OPM Wave ID, and pass/fail thresholds simplify the user experience, reduce training time and testing errors enabling even novice users to get the job done quickly and accurately.
C850 Compact QUAD OTDR
The C850 OTDR combines ease of use and functionality for performing OTDR and loss testing of optical fibers in enterprise networks (campus and buildings). OTDR and OPM test results for the same fibers are stored in logical job folders by cables allowing for easy review, selection, maintenance, and report generation using supplied Windows compatible software. The C850 OTDR can be used in pairs or with a C840 to perform Tier1 dual-wavelength, two fiber bi-directional tests. Loss and length can be measured and compared to ISO/TIA/EN or User standards or applications to provide pass/fail feedback regarding the fibers ability to meet the acceptance criteria to be certified. The C850 supports visual inspection per IEC 61300-3-35 using the DFS1 Digital FiberScope allowing users the ability to view and document connector end-face images with their OTDR traces and loss results. Thousands of OTDR test results may be saved as standard .SOR files, which can be stored internally or on the supplied USB drive. Test results are transferable via a USB cable or USB drive to a computer for viewing, printing, and analyzing with the supplied Windows compatible software - TRM (Test Results Manager). Acceptance reports generated using TRM can include OTDR traces with summary and event information with or without pass/fail indication, Event maps, and end-face images. Applications Tier 1 and Tier 2 testing of premise networks Bi-directionally measure loss and length of fiber links Perform Pass/Fail Event and Link measurements Certify fibers using Pass/Fail criteria of industry standards, applications and user-defined limits Create professional certification reports
2009-2011, AFL, all rights reserved. C850-00-2000 Revision 1E, 2011-06-22 Specifications are subject to change without notice.
C850 OTDR with DFS1 Digital FiberScope
Features OTDR dynamic range: 22 dB (MM), 26 dB (SM) Inspection capable with the DFS1 Digital FiberScope Integrated OPM, OLS, and VFL (650 nm) Full Auto, Expert, Real-Time OTDR test modes Touch and Test user interface Automatic Pass/Fail analysis (TIA/ISO/EN) Bellcore (GR-196) .SOR file format Internal (1000s tests) and USB storage Wave ID detect if used with NOYES Wave ID series light sources >8 hours battery life or AC power USB host and function ports TRM reporting software
www.AFLglobal.com or (800) 321-5298, (603) 528-7780

1

Specifications
OTDR Emitter Type Safety Class Center Wavelengths Wavelength Tolerance Dynamic Range (SNR = 1) Event Dead Zone b Attenuation Dead Zone Pulse Widths Range Settings Sampling Points Minimum Data Point Spacing Group Index of Refraction (GIR) Distance Uncertainty (m) d Linearity e Loss Threshold Loss Resolution Reflectance Accuracy f VISUAL FAULT LOCATOR Emitter Type Safety Class Wavelength Output Power (nominal) LIGHT SOURCE Available Wavelengths (nominal) Emitter Type Safety Class Output Power Stability (after 15 minutes warm up) Wave ID Transmit Tone Generation Laser Class II FDA 21 CFR 1040.10 and 1040.11, IEC 60825-1: 2007-03 650 nm 20 nm 0.8 mW MM PORT 850/1300 nm SM PORT 1310/1550 nm
c a
MULTIMODE Laser
SINGLE-MODE
POWER METER Calibrated Wavelengths Detector Type Measurement Range Accuracy h Measurement Units Wavelength ID j Set Reference Data Storage Tone Detection GENERAL Test Modes Trace File Format OTDR (Full Auto, Expert, Real-Time), Auto Test, OPM, OLS, VFL, DFS SR-4731 (GR-196-CORE Appendix A, B; SR-4731) 850, 1300 1310, 1490, 1550, 1625 nm InGaAs 2 mm +6 to -60 dBm 0.25 dB, dBm, mW Yes (to -47 dBm) Yes Yes Yes (to -47 dBm)
Class I FDA 21 CFR 1040.10 and 1040.11, IEC 60825-1: 2007-03 850/1300 nm 20/30 nm 22 dB 1.5 m 9m 10, 30, 100, 300 ns; 1, 3, 10 s 250 m to 64 km 0.25 m 1.4000 to 1.6000 (1 + 0.005 % x distance + data point spacing) 0.05 dB/dB 0.05 dB 0.01 dB 2 dB 250 m to 208 km Up to 16,000 1310/1550 nm 20/30 nm 26 dB
Length Measurement Range 5 km (MM); 200 km (SM) Data Storage Internal flash memory USB flash drive (2.0) Downloadable from unit directly to PC Data Storage Capacity Data Transfer to PC Tool Free Adapters Size Weight Operating Temperature Storage Temperature Power Battery Life k, m Recharge Time l, m Display Internal >1000 fibers USB Modular cleanable SC/ST/LC 27.4 x 19.3 x 7.1 cm (10.8 x 7.6 x 2.8 in) 2.3 kg ( 5 lb) -10 C to +50 C, 0 to 90 % RH (non-condensing) -20 C to +60 C, 0 to 90 % RH (non-condensing) Rechargeable Li-Ion or AC power adapter >8 hours continuous testing 4 hours 16.51 cm (6.5 in), color, transflective
LED Laser Class I FDA 21 CFR 1040.10 and 1040.11, IEC 60825-1: 2007-03 0 dBm, 9 m SM >-20 dBm, 62.5 m MM g 0.1 dB over 1 hour 0.07 dB over 1 hour 0.15 dB over 8 hours
Yes 270 Hz, 330 Hz, 1 kHz, 2 kHz
Notes: a. All specifications valid at 25 C unless otherwise specified. b. Typical distance between the two points 1.5 dB down each side of a reflective spike caused by a -45 dB event using 10 ns pulse width. c. Typical distance from event location to point where trace is within 0.5 dB of backscatter caused by a -45 dB event using 10 ns pulse width. d. Does not include GIR uncertainty. e. Typical. f. For a non-saturated event.
g. Output power will be approximately 3 dB less if a 50 m mandrel-wrapped jumper is used instead of a 62.5 m mandrel-wrapped jumper. h. Accuracy measured at -10 dBm per N.I.S.T. standards. j. Automatic wavelength identification and switching when used with NOYES Wave ID Series Light Sources. k. Typical, depending on display brightness. l. Typical, from fully discharged to fully charged state, unit may be operating. m. External battery charger available.

2

Ordering Information The C850 OTDR kits and options allow users to buy the test equipment functionality needed today and grow to meet the demands of certification testing. The C850 combined with an OLS optical light source will allow users to test and generate detailed reports with both OTDR and Loss results shown for each fiber and in charts by cable. Users can add a C840 or another C850 to perform Certification testing. Two C850s or a C840 Tester and C850 can be used together to perform Tier 1 dual wavelength MM (850/1300 nm) and SM (1310/1550 nm) auto tests of one or two fibers in one or both directions as well as measure both loss and length of the fibers and compare to industry standards (TIA/ISO/EN), applications and user-defined threshold values to certify the fibers. The C850 OTDR and C840 Certification Tester work with the DFS1 Digital FiberScope. When placing an order, select options as follows: Model, Optical Configuration, Language, and Case. Example: C850 100 LP1 H2 C850 NNN LLL CC
Case (CC) S1 = Soft case H1 = Hard case and soft case with cleaning accessories
Model C850 Optical Configuration (NNN) 100 = QUAD 850/1300 nm MM and 1310/1550 nm SM Language (LLL) LP1 = Language: English

3

Ordering Information (continued) Each C850 kit includes the C850 QUAD OTDR with integrated OLS, OPM, VFI, USB Flash drive, PC software for OTDR trace analysis and certification or OPM loss reporting, AC adapter, switchable test ports adapters and accessories (see table below). The C850 hard carry case kit has room for up to 6 Fiber Rings, jumpers in a jumper carry case, and the DFS1 Digital FiberScope kit (accessory items must be ordered separately).
CARRY CASE AND ACCESSORIES Soft case Soft and hard cases CLEANING PRODUCTS One-Click Cleaner SC/ST/FC, 2.5 mm One-Click Cleaner SC/ST/FC, 2.5 mm One-Click Cleaner LC, 1.25 mm Cletop - SB white tape ADAPTERS OTDR/OLS SC, ST, LC SC, ST, LC OPM SC, 2.5 mm, 1.25 mm SC, 2.5 mm, 1.25 mm AFL NO. VFI 2.5 mm 1.25 mm C850-100-LP1-S1 2.5 mm 1.25 mm C850-100-LP1-H1
C850100LP1H1 Kit Contents

ITEM C850 Adapters DESCRIPTION QUAD OTDR/Auto Test Certification Tester OTDR and OLS ports SC, ST, LC OPM port SC, 1.25 and 2.5 mm Universal VFI port 1.25 and 2.5 mm Universal Mandrel 62.5 m, 3 mm jacket and 50 m, 3 mm jacket Stylus pen for touch screen USB thumb drive, 1G; USB to mini-USB cable Small plastic parts box (2) to store adapter caps and mandrels AC adapter (1), specify country of use Cleaning Accessories Cases One-Click Cleaner SC/ST/FC, 2.5 mm One-Click Cleaner LC/MU, 1.25 mm Cletop SB white tape Hard transit case holds C850, and above accessories Soft case for C850 Report Software PC software
OTDR, Inspection, and Cleaning Accessories

DESCRIPTION DFS1 Digital FiberScope PC/UPC Inspection Kit DFS1 Digital FiberScope APC Inspection Kit DFS1 USB Digital Fiber Inspection Kit without Adapters Fiber Ring, 1 fiber, 50/125 m multimode, 150 m Fiber Ring, 1 fiber, Laser Optimized, 50 m multimode, 150 m Fiber Ring, 1 fiber, 62.5/125 mm multimode, 150 m Fiber Ring, 1 fiber, single-mode, 150 m Wet Cleaning Kit (shown) for SC/FC/ST/LC connectors. Dry Cleaning Kit One-Click Cleaner SC, ST, FC (500+ cleans) One-Click Cleaner LC/MU (500+ cleans) One-Click Mini-100 SC, ST, FC (100+ cleans) One-Click Mini-100 LC/MU (100+ cleans) One-Click Cleaner Ultra 2.5 SC, ST, FC (enlarged cleaning) Zippered Jumper Carry Case AFL NO. DFS1-00-04XU DFS1-00-04XA DFS1-00-04XN FR1-M5-150-x1-x2 a FR1-L5-150-x1-x2 a FR1-M6-150-x1-x2 a FR1-SM-150-y1-y2 a 8500-20-0900 8500-20-0901 8500-05-0001MZ 8500-05-0002MZ 8500-05-0005MZ 8500-05-0006MZ 8500-05-0007MZ 1400-01-0086PZ
Miscellaneous Accessories
Notes: a. When ordering Fiber Rings, specify connector types (x1, x2, y1,y2).
Authorized Channel Partner

FIBER SYSTEM YES S NO
ISO
CERTIFIED
9001
United States Customer Service 1.800.321.5298 1.603.528.7780 www.AFLglobal.com
Europe, Middle East, Africa Max Penfold [email protected] +44 1799 542 840 +44 7802 839 160
Middle East Ahmed El Sakaty [email protected] +20 106 451 523
Africa (Sub Sahara) Nicholas Cole [email protected] +44 7702 005 590
Greater China Dai Liu [email protected] +86 133 1101 4533
Asia-Pacific (non-China) Saw Biing Huei [email protected] +65 9791 3398

4

C850 Compact QUAD OTDR With QUAD OLS and OPM

Uploaded by

Copyright:

Available Formats

C850 Compact QUAD OTDR With QUAD OLS and OPM

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

C850 Compact QUAD OTDR With QUAD OLS and OPM

Uploaded by

Copyright:

Available Formats

C850 Compact QUAD OTDR with QUAD OLS and OPM

C850 OTDR with DFS1 Digital FiberScope

www.AFLglobal.com or (800) 321-5298, (603) 528-7780