Scribd
Upload
484 views

Process Interaction Matrix Article

The document describes a case study of Quality Works, a small publishing company, developing a process interaction matrix to meet the requirements of ISO 9001:2000. They analyzed their management and product realization processes and identified interactions between them. They created a process interaction matrix with the processes listed along both rows and columns to document these interactions. An example of the matrix is shown, with arrows and text indicating which processes provide input to or may receive input from other processes. The matrix provided a concise way to define and document the required process interactions for their quality management system.

Uploaded by

vasudeva yasas
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
484 views

Process Interaction Matrix Article

The document describes a case study of Quality Works, a small publishing company, developing a process interaction matrix to meet the requirements of ISO 9001:2000. They analyzed their management and product realization processes and identified interactions between them. They created a process interaction matrix with the processes listed along both rows and columns to document these interactions. An example of the matrix is shown, with arrows and text indicating which processes provide input to or may receive input from other processes. The matrix provided a concise way to define and document the required process interactions for their quality management system.

Uploaded by

vasudeva yasas
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

ISO 9001:2000 - A Process Interaction Matrix A Case Study

By Mark Kaganov

Abstract
This article presents a case study of development and implementation of a process interaction matrix to address one of the requirements of ISO 9001:2000 standard [1]. Going beyond a simple case study model, this tool may also be used for quality management systems (QMS) compliant with ISO 13485:2003 standard [2]. This article will be of interest to companies developing or improving their QMS for such standards.

Introduction
One of the new requirements of ISO 9001:2000, specified in the paragraph 4.2.2 c), requires a company to develop a quality manual that, among other attributes, shall contain a description of the interaction between the processes of the quality management system. Through my experience, as a professional auditor, with dozens of companies around the world, I found that very few businesses had developed practical approaches to address this requirement. Attempts to document process interactions range from busy and hard to read flow charts to establishing crossreference tables in the quality manual. I observed one of the best tools to address process interaction requirement at Quality Works, a small on-line publishing company.

Initiation of the project


Quality Works, a small Internet-based publishing company, has set a goal to establish compliance with ISO 9001:2000 standard. The Management Team assigned the companys Business Manager to develop and implement documentation to address new requirements of the standard. While most of the new requirements were simply addressed through preparation of the corresponding procedures and work instructions, documentation of the interaction of the processes created some difficulties. Attempts to document interaction of processes through traditional flow-chart resulted in a hard to read busy document that did not impress the management team.

Page 1

Brainstorming
To address this issue, the management group conducted a brainstorming session to search for a new tool. The group determined that there were two types of the processes: processes related to product realization and processes related to the management system as follows: Business management processes: Documentation management Management review Internal audit program Non-conformity and Corrective & Preventive Action (NC-CAPA) System Communication Resource management Record management Information technology Product realization processes: Market analysis Product design Verification Validation Product release Order processing Product delivery Customer satisfaction Continual improvement

Identification of process interactions


Analyzing system and product realization processes, the management team concluded that virtually all system processes are interrelated. For example, management review may receive inputs from corrective actions, communication, internal audits, etc. Internal audit process receives inputs from all processes within the company and provides feedback or input into all those processes. Product realization process was found to be more linear than system processes. For example, results of the market analysis initiate product design. Product design leads to verification. If verification is successful, validation of the product takes place. Validation of the product results in product release and finally communication regarding availability of the product. Customer satisfaction and continual improvement close this sequence with a possibility of providing inputs into Product delivery, Order processing, Product release, etc.

Page 2

To document process interactions, the company elected two tools. The first, top-level definition of the process interaction was documented in the Process Interaction Matrix shown in Figure 1. The second tool was a well-known technique of flow-charting for those processes that required graphical illustration.

Afterword
Use of the Process Interaction Matrix at Quality Works proved that it is a helpful concise method of defining and documenting interaction of processes for an ISO 9001:2000 quality management system. Based on our experience, we also realized that the same matrix might be successfully used for other standards requiring definition of the interaction of the processes, such as ISO 13485:2003, ISO/TS 16949 [3] and others.

Acknowledgments
The author would like to express his gratitude to Maria de Lourdes Cruz Valenzuela, the President of Quality Works, for her willingness to conduct and publish this case study.

About the author


Mark Kaganov is a Director of Operations with Quality Works. He is an IRCA certified QMS lead auditor and RAB certified EMS lead auditor. He earned a masters degree in design and technology of electronic equipment from Moscow University of RadioElectronics and Automation.

References
[1] [2] [3] ISO 9001:2000 Quality management systems Requirements ISO 13485:2003 Medical devises Quality management systems Requirements for regulatory purposes ISO/TS 16949 Quality management systems particular requirements for the application of ISO 9001:2000 for automotive production and relevant service part organizations

Page 3

Figure 1 - Process Interaction Matrix


268 Rev. 03 Processes Type > Process No. > System processes 3 4 5 6 7 Product realization 13 14 15 16 17

1 Documentation management

10

11

12

18

19

Resource management

Record management

Management review

Quality-Works.com < Process Type < Process No. Interaction between the processes matrix

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

System processes

Documentation management NC-CAPA Management review Internal audits Communication Record management Resource management Information technology Market analysis Product design Design verification Design validation Product release Order processing Product delivery Customer satisfaction Continual improvement Legend:

> < > < > < > < > < > < > < > < > < > <

> > > > >

< < < < <

> < > > > >

< > < < < <

> > > > > > >

< < < < < < <

> > > > > > > >

< < < < < < < <

> > > > > > > >

< < < < < < < <

> > > > > > > >

< < < < < < < <

> > > > > > > >

< < < < < < < <

> > > > > > > >

< < < < < < < <

> > > > > > > >

< < < < < < < <

> > > > > > > >

< < < < < < < <

> > > > > > > >

< < < < < < < <

> > > > > > > > > > > > > > > >

> <

Product realization

< > < < > < < > < < > < < > < < > <

1 Process 2 Process 3 Process

5 >

6 <

> <

Process No. Process 1 provides input into the process 5 Process 6 provides input into the process 2 Process 3 provides input into the process 7 and MAY receive input from process 7

Continual improvement < < < < < < < < < < < < < < < <

Information technology

Customer satisfaction

Order processing

Product delivery

Product release

Market analysis

Communication

Product design

Internal audits

Verification

NC-CAPA

Validation

You might also like