#

December 22, 2012 January 13, 2013

26

FLOOR JACK 3.5 TON

Quick to load Quick to lift
Extra long handle with 3/8" thick foam bumper to prevent handle from damaging vehicles. Equipped with universal joint release mechanism. Most lift points can be contacted in less than 2 strokes thanks to the patented lifting system. After the first pump reaches the lifting point, the jack continues with extraordinary lifting speed to raise the load to the desired height.

CG

30

$327.95
MFJ354P

$30

SAVE

Item

Capacity

Min. Height

Max. Height

Handle Length

Saddle Diameter

Length

Width

Weight

MFJ354P

3.5 ton

4"

20.5"

50"

4.5"

28"

14.5"

105 lbs.

END OF THE YEAR INVENTORY BLOW-OUT!

BIG savings throughout the flyer on every day tools and last minute gift ideas

$129.50
SE628

$139.95
SE440

$25

SAVE

$144.50
SE906

$20

SAVE

SILVER EAGLE 1/4" AIR RATCHET

Super small head design allows access into very tight places Ergonomic comfort grip for ease of use Rear muffled exhaust for convenience and quiet operation Matco patented grease fitting (US patent 6,305,246) for ease of service and durability on critical head parts Working torque 5-20 ft. lbs

SILVER EAGLE MINI STRAIGHT SANDER

Two finger throttle for easy control and less fatigue Adjustable speed regulator to match speed to job Handle exhaust directs exhaust away from work area Includes 2" and 3" disc holders Small and lightweight for easy use in tight areas 15,000 RPM's

SILVER EAGLE AIR HAMMER

Upgraded to include positive action trigger for precise control Includes a quick change chisel retainer Great for working on muffler and pipe removal, body shop work, scraping rust and light front end work 3,200 blows per minute

$64.50
Save 10%
AG1200KIT

$198.95
MT1788R

$30

SAVE

$209.95
AI150

$30

SAVE

6 PIECE CYCLONE BLOW GUN KIT

Meets OSHA standards Durable cast aluminum body High volume cleaning force Ergonomic comfort grip Contains: 6" extension tube, Xtreme-Flo tip, Quiet-Flo tip, chip guard and Tri-Thrust tip

5" HIGH SPEED REVERSIBLE SANDER

Patent pending reversible function which allows the user to direct sparks and debris away Built-in regulator and variable speed trigger Includes 3", 4-1/2" and 5" backing pads, 14,000 RPM for power and convenience

1/2" IMPACT WRENCH

450 ft. lbs. of maximum torque Includes free boot cover Torque range: 25-300 ft. lbs. Refined twin hammer mechanism Comfortable contoured handle Net weight: 5-3/4 lbs., overall length: 7-5/8"

MSC4SVFDA SILVER VEIN (pictured here) MSC4TFD TITANIUM MSC4BLFD BLUE MSC4RFD RED MSC4SBFD STEALTH BLACK (flat finish) MSC4BKFD BLACK

$999.95
HEAVY DUTY CART WITH FULL DRAWERS

$150

SAVE

39"

Four bumpers that help prevent dents and dings Four 5" x 2" casters with 2 locking and 2 non locking Full extension roller bearing slides Push handle 2 gas pistons that serve as a lid stay as well as raising the cart lid when unlocked 6 drawers: Rows 1 - 3: 3" depth, Rows 4 - 5: 4" deep, Row 6: 5" deep Top tray under lid: 5" deep

CG

w w w.matcotools.com

33"

20"

Bright 3 watt focused LED light

Get the freedom you love and need. One battery, five different tools and a light.

BEST IN CLASS
2-speed transmission with 204 in. lbs. of torque and low 400 RPM and high 1700 RPM

BEST IN CLASS
60 ft. lbs. of maximum torque

$508.50
MUC12COMBO

$55

SAVE

CORDLESS IMPACT, SCREWDRIVER KIT

Our 12V line delivers MORE POWER, LIGHTER WEIGHT and MORE VERSATILITY without the cord!

BEST IN CLASS
1.5 Ah battery capacity with fuel gauge

Kit includes: " drive screwdriver " drive impact wrench LED flashlight Two 12V lithium ion batteries 12V charger Carry case

HURRY! LIMITED QUANTITIES LEFT!

Just need the impact & battery? Or already have a 12 V kit and want to expand your line of cordless tools? Check out the offers below:

ADDITIONAL TOOLS AVAILABLE FOR THIS BATTERY:

MUC12DD - 3/8" Drill MUC12MP - Polisher MUC12R - Ratchet

$182.50
MUC12IW

$20

SAVE

$146.50
MUC12S

$15

SAVE

$172.95
MUC12MP

$15

SAVE

$280.95
MUC12IWKIT

$25

SAVE

12V CORDLESS INFINIUM 1/4" IMPACT WRENCH

Trigger activated LED lights Ergonomic variable speed trigger provides precise control and 2,400 blows per minute One hand forward/ reverse knob 60 ft. lbs. of max torque

12V CORDLESS INFINIUM SCREWDRIVER

High torque drivetrain with 12-speed adjustable clutch Precise variable-speed trigger with one-hand forward/reverse switch Specially designed bit retainer compatible with 1" and power bits

12V CORDLESS INFINIUM POLISHER

Ideal for polishing and fine-sanding in tight areas and workspace inaccessible by other power tools Full variable speed Super duty drivetrain Includes 3" backing pad

12V CORDLESS INFINIUM 1/4" IMPACT KIT

CG

BATTERY AND CHARGER NOT INCLUDED WITH THE INDIVIDUAL TOOLS (MUC12IW, MUC12S, MUC12MP)

MATCO PREMIUM SOCKETS

High visibility laser marking helps technicians identify sockets quickly Opti-Torque applies torque to fastener sides not corners, allowing more torque to be applied to fastener

$395.50
ETWC250A

$50

SAVE

$275

.95

$40

SAVE

SBUPM76TB

1/2" DRIVE 250 FT. LBS. ELECTRONIC TORQUE WRENCH

3/8" DRIVE 7 PIECE METRIC 6 POINT UNIVERSAL IMPACT SOCKET SET

Pinless preform socket end that enables true 360 rotation Includes sizes: 10mm, 12mm - 15mm, 17mm, 18mm

Four easy to understand and use function buttons with buzzer and color coded lights to alert when target torque is achieved Easy to read lighted LED display allows operator to view torque without stopping Quickly converts units automatically +/- 2% clockwise accuracy, +/- 3% counterclockwise accuracy from 10% to 100% - 250 ft. lbs. capacity Features 60 tooth fine tooth mechanism that requires a small 6 swing arc Recessed shift lever to prevent accidental shifting to increase job speed and improve job efficiency

$14.50 $169.95
SCPM136TA

$71.50
Save 15%
CXP36BB

Save over 15%

$25

SAVE

SPS98

WING NUT SOCKET

1/4" square drive Fits wing nut bolts on hose clamps Rubber O-ring for secure lock Used in aircraft hose work

1/2" DRIVE IMPACT REDUCING EXTENSION

1/2" square drive with a drive reducing 3/8" square male tang on the opposite end Overall length: 36"

1/2" DRIVE 13 PIECE METRIC 6 POINT IMPACT SOCKET SET

Includes sizes: 10mm - 19mm, 21mm, 22mm, 24mm

$61.95
SBXPB3T

$10

SAVE

3/8" DRIVE 3 PIECE IMPACT EXTENSION SET

$196

.50

$25

SAVE

SCDPM56TA

$343

.95

$80

SAVE

1/2" DRIVE 5 PIECE METRIC 6 POINT DEEP IMPACT SOCKET SET

SBDUM106RB

A full selection of three 3/8" drive impact extensions in various lengths Three-piece set comes in a storage tray Includes sizes: 3", 6", 12"

Includes sizes: 30mm, 32mm, 34mm - 36mm

3/8" DRIVE 10 PIECE METRIC 6 POINT DEEP UNIVERSAL CHROME SOCKET SET
Deep length universal sockets provide access into tight areas S2 tool steel pin increases overall strength by approximately 20% Opti-Torque feature creates off corner loading applying the torque to the sides of the fasteners. This reduces the risk of rounding fastener corners. Counter Torque feature on the drive end applies torque from the drive tool evenly reducing socket stress Includes sizes: 10mm - 19mm

$139.95
SBXP3L

$25

SAVE

$141.95
SAIPM126R

$20

SAVE

3/8" DRIVE 3 PIECE LOCKING IMPACT EXTENSION SET

One piece construction, dual heat treated for maximum strength Locking mechanism specifically designed for impact use and knurled sleeve designed to encapsulate the retaining ring to protect work environment and the tool Positive pin lock design prevents accidental socket removal Includes sizes: 3", 6", 12"
CG

1/4" DRIVE 12 PIECE METRIC 6 POINT MID-LENGTH IMPACT SOCKET SET

Includes sizes: 5mm, 5.5mm, 6mm - 15mm

w w w.matcotools.com

THIS
SPC6PA

BUY

FOR BOTH!

97.50

ONLY

GET THIS

FREE!
$32.20 VALUE
PCHOB

6 PIECE PUNCH & CHISEL SET

A basic set of punches and chisels, perfect set for home use Contains: 6" Cold Chisel (3/8" x 1/2"), 6" Cold Chisel (1/2" x 5/8"), 4" Pin Punch (1/4" x 3/32"), 4" Pin Punch ( 5/16" x 3/8"), 6" Starter Punch (3/8" x 3/32"), 5" Center Punch (3/8" x 3/16") conveniently organized in storage pouch

PUNCH & CHISEL HOLDER

Protects hands from bumps, bruises, and busted knuckles

$134.95
C30EFHM

$20

SAVE

$145.50
CIR12

$20

SAVE

$125.50
BFR128LFT

$20

SAVE

1/2" DRIVE BREAKER BAR

Busts loose stubborn bolts Ergonomic handle design Overall length: 30"

1/2" DRIVE 12" INDEXIBLE RATCHET

Adjustable 12" ratchet with 11 angled positions 72 tooth fine ratchet mechanism

3/8" DRIVE 88 TOOTH LOCKING FLEX RATCHET

88 ratchet gear teeth produce a swing arc just over 4 allowing faster work in the most compact spaces Features unique 9-position locking flex-head. Locking lever ensures ratchet head maintains desired position regardless of size or applied load with the head rotating through a full 180. Streamlined tear drop, ultra low profile ratchet head and long handle for improved access in the most compact areas Overall length: 12"

$18.25
Save 25%
EXTDR6

LIMITED QUANTITIES

$281
SPL17KA

.50 $50

SAVE

$125
PA3S

.95

$20

SAVE

1/4" DRIVE EXTENDING DRIVER & ADAPTER

Quick release extension bar with ergonomic cushion grip Extends from 7-1/2" to 12-1/2" for reaching tight and inconvenient areas 1/4" drive end cap so you can use a 1/4" ratchet for extra torque and strength Set includes a free GDBA (1/4" female square to 1/4" hex) adapter, which enables the driver to be used with 1/4" hex bits

17 PIECE PUNCH AND CHISEL SET

Non-brass punches are manufactured using S2 tool steel Contoured crowns ensure the proper balance of strength, hardness and durability Includes center punches, pin punches, starter punches, chisels and a brass drift punch Includes sizes: 3/32", 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 1/2", 5/8", 7"

3 PIECE ALLIGATOR PLIER SET

No handle squeezing; works with onehanded downward pressure Self gripping jaws for a secure and non-slip grip Specially hardened jaw teeth for longer tool life Forged guard prevents pinching of operator's fingers Box joint construction for greater strength and durability Forged from oil-hardened chrome vanadium steel for greater durability Includes alligator pliers in the following length sizes: 7", 10", 12"

CG

MATCO DIAGNOSTICS & TROUBLESHOOTING

COMPRESSION TESTING

BASIC

$68.95
Save 10%
MD941

$54.95
Save 15%
MT16

BASIC MULTIMETER
Provides readings for volts, amps, and ohms required for automotive electrical system tests as well as Diode and Continuity tests Includes temperature probe for direct contact temperature measurement Auto / Manual Range Diode Check Continuity Buzzer Data Hold, Max Hold Auto Power Off

IR THERMOMETER
Ranges from -31 689 F 12 : 1 distance to spot ratio Min / max readings High and low alarms

Save 10%
CT50K

$72.50
BASIC COMPRESSION TESTER KIT
Basic compression test kit contains 14mm / 18mm flex hose and 10mm, 12mm adapters as well as a 14mm deep adapter High quality 0 - 300psi gauge with pressure relief valve and quick coupler Includes spare parts kit and a vinyl pouch for convenient storage

ADVANCED

$37.95 $216.45
TH209

Save over 10%

CT611

FUSEHOUND
Obtain circuit amperage without needing to remove the fuse Tests amperage on standard Mini and Maxi fuses Adjustable fuse values allows accurate testing on most fuses Great for finding parasitic drains or determining if fuse is receiving correct amperage

$97
MT20

.50

$10

SAVE

COMPRESSION TESTER FORD ADAPTER

Compression tester adapter for 3-valve, 4.6/5.4 Fords using 16mm thread plugs Adapter couples with any standard 14mm spark plug hose connector Ford adapter features a knurled end for ease of starting thread The 5" length extends out of the plug well for easy access

IR THERMOMETER WITH HD COLOR SCREEN

Infrared thermometer with heavy duty color screen Temperature ranges from -58 to 932 F 12 : 1 distance to spot ratio Backlit color LCD screen Automatic power off after 15 seconds Packaged in custom molded case with free 1" dial thermometer

CG

w w w.matcotools.com

Hood scoop not only looks cool but has a functional purpose as well: the recess allows for tools to be stored on the lid without sacrificing any top tray storage! Two 11.75" magnets with quick release handles are positioned on the lid for convenient storage of your most popular tools

FULL SIZE 2 DRAWER MUSCLE CART

Single hand operated "quick release" gas pistons allow for the cart to transition into a convertible in a matter of seconds!

Great for wheeling under lifts!

Doors swing open 270 and are held in the open and closed position by magnets Bungee cords on the doors maximize lockable storage space

$849

.95

$120

SAVE

4 COLORS TO CHOOSE FROM:

BLACK MSCL440-BK ORANGE MSCL440-O BLUE MSCL440-BL RED MSCL440-R
CG

$390.95
SRDFXLM52T

$80

SAVE

5 PIECE DOUBLE FLEX-JOINT BOX WRENCH SET

$198.95
SMC102T

$55

SAVE

$343.50
S9GRRCM12

$55
Ultimate access. The double flexing head design and extra long beam get to work in the hardest to reach areas Versatile. Loosen and tighten any 6pt, 12pt, spline, star, square and even up to 50% rounded off fasteners Includes sizes: 8mm, 10mm, and 12mm-19mm

SAVE

10 PIECE SAE 12 POINT STANDARD COMBINATION WRENCH SET

Reduce tip spread by 50% with OptiTorque Pro modified open end Applies 25% more torque to fastener than the competitions core line of combo wrenches, without rounding corners Durable. Higher hardness, high alloy material reduces tip spread and wear on open end Includes sizes: 1/4", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16" 5/8" 11/16", 3/4"

12 PIECE 90 TOOTH METRIC REVERSIBLE COMBINATION RATCHETING WRENCH SET

25% smaller swing arc. 90 teeth deliver an industry-best 4 swing arc to get to work in the tightest areas. Versatile. Loosen and tighten any 6pt, 12pt, spline, star, square and even up to 50% rounded off fasteners. Reversing lever with 12 offset provides on the fly ratcheting adjustability with knuckle clearance Includes sizes: 8mm - 19mm

$74.50
Save 15%
DTG5

3.125" DIAL TIRE INFLATOR

3-in-1 function: inflate, deflate, and measure tire pressure Measuring Range: 0-174psi Units: PSI / BAR Resolution: 2psi Two position inflate/deflate level, 21" hose (0-12 Bar/174psi), measuring range: 0-174psi Accuracy: 0-58psi +/-1.2psi Accuracy: 59-174psi+/-2psi Working Temperature: 32-104 F

JEEPERS
$98.50 Each
LOW-PROFILE
Floor clearance: 7/8" Length 38" Width 17-1/2" Height 4"

BLUE

MCB3

MCR3

RED

GREEN

MCG3

MCY3

YELLOW

CREEPERS!
$10
MCO2B
SAVE

$31.95
SRP3PC

ORANGE

Save over 10%

3 PIECE SEAL & O-RING PULLER SET

Quickly and easily removes O-Rings, grease and oil seals Special angle on the tool head provides better access than the traditional seal pullers 3 different lengths and tips fit nearly all seal applications Includes 4.6", 6" and 6.5" pullers

Easy-to-clean surface is resistant to solvents, greases, and fuels Lightweight and comfortable

Inline skate style rollers are inserted into steel bushings which are molded into the creeper body. This provides added strength and easy roller replacement.
CG

w w w.matcotools.com

HURRY! LIMITED QUANTITIES LEFT!

$76.85
SCPROM121C

$19.50
CK4

Save nearly 30%

OLD TIMER SPECIAL

Limited edition gift set & tin 3 classic Old Timer knives Set has one each of the 12OT, 72OT & 108OT

$52

.75

S&W EXTREME OPS FOLDER

A sleek sturdy multifunction tool Stainless steel drop point blade with thumb knob for easy opening Handle and blade are brushed stainless steel

SWPROM124C

S&W RESCUE KIT

Emergency tool for cutting seat belts Glass breaker Serrated blade sharpening tool

The sale of certain knives is illegal in some states and it is ultimately the responsibility of the distributor to know and obey the laws of the state and localities where he/she resides and sells tools. Matco does not defend or pay court costs associated with distributors breaking their state and local laws and the fees they incur in the defense of their actions.

$23.50 $104.50
MFPKA

KEEP YOUR WORK AREA LOOKING CLEAN

MATCO FABRICATION GLOVES

100% leather construction Kevlar stitched throughout Dual layer thumb, index and middle fingertip patches Dual layer palm patches Enlarged opening for easy entry

Save 20%
DESIGNED TO REMOVE AND INSTALL FREEZE PLUGS USED IN LIQUID-COOLED GAS AND DIESEL ENGINES

70001

Save over 10%

V7 BRUSH

FREEZE PLUG TOOL KIT

Special-machined head adapters fit most freeze plugs: 3/4", 1", 1-1/4", 1-1/2", and 1-3/4" High-carbon steel, fully-plated Two formed shafts: 8" and 18" (angled) long with knurled ring nut

V-shaped electrostatic bristles sweep more effectively than traditional round bristles. Picks up fine particles such as dust, sand, pet hair, etc Bristles are oil and acid resistant Use in a workshop to sweep away fluids, oil, metal shavings or wood shavings Built-in squeegee to remove water from many surfaces

MTFGM MTFGL MTFGXL MTFGXXL

M L XL XXL

$34.50 $34.50 $34.50 $34.50

$20

SAVE

$38.50
RV14

Save over 10%

1/4" HEAVY DUTY HAND RIVETER

$325.50
BRK4T

$70

SAVE

4 TON HYDRAULIC BODY REPAIR KIT

Snap-lock design for quick assembly Automatic pump overload system protects against damage to rams and equipment

Extra long handles provide excellent leverage Spent mandrels are collected in the plastic container for safety and ease of disposal Includes 5 nosepieces: 1/8", 5/32", 3/16", 7/32", 1/4" Overall length 20-3/4"

CG

PDMCS39M PDMCS39L PDMCS39XL PDMCS39XXL PDMCS39XXXL

M L XL XXL XXXL

$71.40 $71.40 $71.40 $74.65 $74.65

LONG SLEEVE POPLIN GRAPHITE

A classic long sleeve poplin that offers comfort and style Easy care 65/35 poly/ cotton blend with stain release and wrinkle resistant

$32.45
PDRNV4

RAT FINK BANNER 3' X 5'

Red banner with the classic Rat Fink design Great for the garage or shop

$27.05
PDRMC7

BIG RAT CAP

Big Daddy Rat Fink design on black cap with Velcro closure

PDMS29M PDMS29L PDMS29XL PDMS29XXL PDMS29XXXL

M L XL XXL XXXL

$71.40 $71.40 $71.40 $82.25 $82.25

MATCO COLLEGIATE HOODIE

Matco's very own collegiate design for a great sporty look Stay warm with this heavy blend perfect fleece hoodie 7.75oz of 50/50 cotton/poly blend for added comfort

$27.05
PDMC245

MARLIN CAP
Classic fit and comfort with this flex-fit cap. Navy cap with red piping on front 100% cotton

BACK

CG

10

w w w.matcotools.com

RACING AGAINST THE CLOCK FOR A LAST MINUTE GIFT? DIE CAST CARS ON SPECIAL!

HURRY! LIMITED QUANTITIES LEFT!

1 2 1 3
$45.95 49MERCROD 1949 MERCURY HOT ROD $45.95 12RATFINK2 1/24 SCALE 1927 GRAHAM WITH RAT FINK $43.50 16STUDPANEL 1/25 SCALE 1916 STUDEBAKER PANEL TRUCK $40.50 28CHEVYPANEL 1/25 SCALE 1928 CHEVY PANEL TRUCK $85.95 SPEEDRACER2 1/18 SCALE SPEED RACER MACH 5 $86.50 MM55STEPSIDE 1/18 SCALE 1955 CHEVY STEPSIDE $40.50 52CHEVYTRUCK 1/25 SCALE 1952 CHEVY WITH MATCO LOAD $91.95 ANTRON2012TF 1/24 SCALE 2012 ANTRON BROWN TOP FUEL DRAGSTER

15%-25% OFF
3 4 2 6 7 5

4 5 6 7

30% OFF
9 10 9
$37.95 11XMASTRUCK 1/25 SCALE FORD WITH TRAILER & FAUX GIFTS 1/18 SCALE STAMPED STEEL MATCO DUMP TRUCK

10 $48.95 STEELTRUCK11

11 13

Operating dump truck features a lift handle and opening rear tail gate

11 $76.50 MM70COUGAR
detailed engine

1/18 SCALE 1970 COUGAR ELIMINATOR Opening hood with 1/18 SCALE 1948 CHEVY PANEL DELIVERY TRUCK 1/18 SCALE 1956 FORD F100 PICKUP 2011 MATCO TOP FUEL DRAGSTER 1/18 SCALE 1965 CHEVELLE HOT ROD 1/25 SCALE 1964 DODGE VAN
11

12 $69.50 48CHEVYPANEL 12 14 15 13 $80.50 MM56F100

14 $69.95 AB2011TFD

15 $75.95 MM65CHEVELLE 16
CG

16 $37.95 64DODGEVAN

LIGHTS OUT
CRESETTER CODE RESETTER

This code resetter makes it easy with step-by-step instructions right on the screen.

AUTOMATIC RESULTS FOR EUROPEAN VEHICLES

REQUIRED MANUAL RESETS FOR VEHICLES

Oil Reset Reset Filter Micro Brake Reset Front Rear Brake Reset Vehicle Check Reset Spark Plug Reset Brake Fluid Reset Coolant Reset Vehicle Inspection Reset Exhaust Emission Reset Diesel Filter Reset

Today's vehicles require the Oil Service Light reset after a routine oil change.
Many vehicles require a complex procedure to perform these resets with instructions often too difficult to find. This code resetter makes it easy with step-by-step instructions right on the screen. Additionally, some European vehicles have many maintenance resets such as filter, brake pad service, or cabin filter replacement. The CResetter performs these along with many other electronic OBD maintenance resets. The CResetter is perfect for repair shops, lube shops, and do-ityourselfers.

$149.95

MDCRESETTER
FREE internet upgrades ensures communication with the latest vehicles Fast and easy operation One year warranty

See why the CResetter is the simple, affordable solution for everyday code resets.
*Not all vehicles require a scan tool to reset oil & service reminder lights. **Available resets dependant on vehicle year, make and model Equipment specifications and availability are subject to change without notice.

The products on Matcos National Promo are limited in quantity and subject to availability. Matco reserves the right to correct printing errors.

JOIN US ON FACEBOOK
FACEBOOK.COM/MATCOTOOLS

CPR2612