Fisher Valve Ez

Product Bulletin
51.1:EZ
July 2005
EZ Valve
Design EZ Sliding-Stem Control Valve

Fisher Design EZ valves (figures 1 and 2) are used
for throttling or on-off control of a wide variety of
liquids and gases. The single-port, globe-style body
design offers quick-change trim and a post-guided,
unbalanced valve plug. The Design EZ valve is used
in chemical or hydrocarbon processing applications
or wherever control of non-lubricating, viscous, or
other hard-to-handle fluids is required.
Metal-to-metal seating is standard for all general
applications over a wide range of pressure drops
and temperatures. Metal-to-PTFE seating is optional
for stringent shutoff requirements.
Unless otherwise noted, all NACE references are to
NACE MR0175-2002.
The easy-e Valve Family

Design EZ valve bodies are part of the versatile
Fisher easy-e family of industrial control valves.
easy-e valve bodies share the following
characteristics:
Multiple trim material choices
Trim temperature capability with standard metal
seats to 427C (800F)
FGM gaskets
Interchangeable, restricted-capacity trims and

full-sized trims to match variable process flow
demands
Different valve plug styles that provide
particular flow characteristics for highly-specialized
applications. Standard plugs are available with the
following flow characteristics:
Figure 1. Design EZ Valve with Type 657 Actuator
Optional constructions provide material

compatibility with NACE Standard MR0175-2002.
316 stainless steel packing box parts are
standard (including packing flange, studs, and nuts)
D100025X012
quick-opening
linear
equal percentage
W21742/IL
www.Fisher.com
Product Bulletin
51.1:EZ
July 2005
EZ Valve
Contents
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ENVIRO-SEAL and HIGH-SEAL
Packing Systems . . . . . . . . . . . . . . . . . . . . . . . . .
ENVIRO-SEAL and HIGH-SEAL
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Micro-Flute Valve Plugs for
Minimum Leakage . . . . . . . . . . . . . . . . . . . . . . . .
Class VI Shutoff Capabilities . . . . . . . . . . . . . . . . . .
Tables
Class VI Shutoff . . . . . . . . . . . . . . . . . . . . . . . .
2
3
4
6
7
6
Class VI Trim Materials . . . . . . . . . . . . . . . . 6

Material Cross Reference . . . . . . . . . . . . . . 7
Typical Combinations of
Metal Trim Parts . . . . . . . . . . . . . . . . . . . . 8
Construction Materials &
Temperature Limits . . . . . . . . . . . . . . . . . 9
Valve Body/Trim
Temperature Capabilities . . . . . . . . . . . 10
Bonnet Selection Guidelines . . . . . . . . . . . 12
Maximum Allowable Pressure Drops . . . . 12
Gasket Selection Guidelines . . . . . . . . . . . 13
Maximum Allowable Pressure Drops for
Gasket Materials . . . . . . . . . . . . . . . . . . 14
Maximum Flow Coefficients . . . . . . . . . . . 16
Port Diameters, Valve Plug Travel, and
Stem and Yoke Boss Diameters . . . . . 16
Typical Combinations of
Trim Parts (NACE) . . . . . . . . . . . . . . . . . 16
Bolting Materials and Temperature Limits
for Bolting Compliance (NACE) . . . . . . 17
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . 17
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Coefficients . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
ENVIRO-SEAL Packing System
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Performance+ Seat RingFlow-straightening,

vaned seat ring is available in full port and first
reduction port sizes. It offers excellent open- and
closed-loop performance and may be used as a
direct replacement for the non-vaned seat ring. The
Fisher valve division recommends that the
Performance+ seat ring be used for non-viscous,
flow-up, liquid applications.
Compliance with the Clean Air Act
ENVIRO-SEAL packing systems (figure 4) that
provide an improved stem seal to help prevent the
loss of process fluid are available. These packing
systems feature PTFE, Graphite ULF, or duplex
packing with live-loading for reduced packing
maintenance.
ReliabilityThe process fluid flows through
the trim, flushing away solid deposits above and
below the guide bushing, thus reducing the
possibility of a sticking valve plug.
Easy MaintenanceQuick-change trim, with a
clamped-in seat ring, reduces the disassembly time.
The valve body can stay in the pipeline during
removal of trim parts for inspection or maintenance.
Application FlexibilityLow-flow
requirements can be satisfied with standard
restricted-capacity trim or with Micro-Form,
Micro-Flute, or Micro-Flow valve plugs. If flow
requirements change, the valve can be converted to
full-sized trim.
EconomyStreamlined flow passages provide
greater capacities than most globe valves of the
same line size.
Note
Features
Trim Designed for StabilityPost guiding
provides valve plug stability with less chance of a
sticking valve plug due to non-lubricating or sticky
process fluids or build-up of entrained solids. Post
guiding stabilizes the valve plug at all points in its
travel range to reduce vibration, mechanical noise,
and trim wear.
Neither Emerson, Emerson Process

Management, Fisher, nor any of their
affiliated entities assumes
responsibility for the selection, use
and maintenance of any product.
Responsibility for the selection, use,
and maintenance of any product
remains with the purchaser and
end-user.
Product Bulletin
51.1:EZ
July 2005
EZ Valve
35A7592-E
W7027-3 / IL
Figure 2. Design EZ Sectional
Compliance with European Standards

Valves are available with dimensions specified by
EN/DIN standards. See figure 8.
Sour Environment Service Capability
Materials are available for applications handling sour
environments. These materials comply with the
requirements of NACE MR0175-2002.
ENVIRO-SEAL, HIGH-SEAL
Packing Systems
ENVIRO-SEAL and HIGH-SEAL packing systems
offer exceptional sealing capabilities. These systems
easily install in your existing valves or can be

purchased with new valves. These systems offer an
improved method of sealing your process to
conserve valuable process fluid. The longer-life and
reliability of these systems also reduce your
maintenance costs and downtime.
For applications requiring compliance with

environmental protection regulations, the unique
ENVIRO-SEAL packing system (figure 4) and, for
hazardous service, the ENVIRO-SEAL bellows seal
system (figure 3) are offered. The patented emission
control packing system helps to keep emission
concentrations below the EPA 500 ppm requirement.
Product Bulletin
51.1:EZ
July 2005
EZ Valve
For an excellent stem seal in applications that are
not environmentally-sensitive, the HIGH-SEAL
Graphite ULF packing system (figure 4) is offered.
The HIGH-SEAL packing system provides excellent
sealing at pressure/temperature ratings beyond
ENVIRO-SEAL limits. ENVIRO-SEAL systems may
also be applied for excellent stem sealing in higher
pressure/temperature applications not requiring EPA
compliance.
PACKING
ANTI-ROTATOR
PIN
ENVIRO-SEAL packing systems, available with

PTFE, Graphite ULF, or duplex packing, and the
HIGH-SEAL Graphite ULF packing system feature
live-loading and unique packing-ring arrangements
for long-term, consistent sealing performance.
PURGE-MONITORING
CONNECTION
PROTECTIVE
SHROUD
BELLOWS
VALVE PLUG
CONNECTION
VALVE PLUG
ENVIRO-SEAL, HIGH-SEAL Features

Excellent Sealing CapabilitiesThe patented
packing system provides excellent sealing, guiding,
and transmission of loading force. The excellent
sealing of the ENVIRO-SEAL system can control
emissions to below the EPA (Environmental
Protection Agency) minimum of 500 ppm (parts per
million).
Improved Service LifeENVIRO-SEAL and
HIGH-SEAL system design, very smooth stem
surface, and live-loading combine to give you longer
service with very low maintenance. The external
live-loading provides a constant load over the life of
the packing material, which greatly reduces your
need for packing box adjustment and maintenance.
Easy Installation in Existing ValvesAll
parts needed to install the systems in existing valves
are available in a convenient kit.
W5800-2*A/IL
Figure 3. Design EZ Valve with ENVIRO-SEAL Bellows

Seal Bonnet
Adaptable to Many Applications

ENVIRO-SEAL systems are available with PTFE or
Graphite ULF packing for 9.5 through 31.8 mm (3/8
through 1-1/4 inch) diameter valve stems.
HIGH-SEAL systems with Graphite ULF packing are
available for 9.5 through 50.8 mm (3/8 through
2-inch) diameter valve stems. Standard
ENVIRO-SEAL packing systems can be used in
vacuum service with packing rings in standard
orientation. It is not necessary to reverse the
ENVIRO-SEAL PTFE packing rings.
Product Bulletin
51.1:EZ
July 2005
EZ Valve
PACKING
BOX
STUDS
PACKING
BOX
STUD
SPRINGS
SPRINGS
ANTI
EXTRUSION
RING
PACKING
RING
FOLLOWER
VALVE
BONNET
LANTERN
RING
W58033 / IL
PACKING
W8532-1
TYPICAL ENVIRO-SEAL PACKING SYSTEM

WITH GRAPHITE ULF PACKING
TYPICAL ENVIRO-SEAL PACKING SYSTEM

WITH PTFE PACKING
PACKING
BOX
STUD
SPRING
FOLLOWER
PACKING
W7018 / IL
W8533-1
TYPICAL HIGH-SEAL PACKING SYSTEM

WITH GRAPHITE ULF PACKING
TYPICAL ENVIROSEAL PACKING SYS

TEM WITH DUPLEX PACKING
Figure 4. ENVIRO-SEAL and HIGH-SEAL Packing Systems
Product Bulletin
51.1:EZ
July 2005
EZ Valve
Table 1. Class VI Shutoff Availability
Type
Port Size, Inches
Seat
Minimum Seat Load
EZ
4
Metal
300 lbs/lineal inch
Table 2. Class VI Trim Materials

CAGE/SEAT RING
RETAINER
TYPE
EZ
S31600 (316 SST)
EZ
S31600
VALVE PLUG
TRIM TEMPERATURE LIMIT
SEAT RING
S31600/CoCr-A (alloy
6) seat w/ standard
beveled seat
S31600/CoCr-A seat
and guide w/ standard
beveled seat
C
F
S31600 w/ radiused
seat (special design)
Not a limiting factor
S31600 w/ radiused
seat (special design)
TEMPERATURE, C
0
30
60
90
120
150
177
204
1200
80
1000
69
60
800
600
40
400
1
200
20
ALLOWABLE PRESSURE DROP, BAR
ALLOWABLE PRESSURE DROP, PSI
18
0
0
50
100
150
200
250
300
350
400
TEMPERATURE, F
NOTE:
1 MAXIMUM TEMPERATURE FOR PTFE DISK IN DESIGN EZ
VALVES WITH ALL METAL TRIM PARTS EXCEPT N05500 (K-MONEL)
AND ALLOY 6B. MAXIMUM TEMPERATURE FOR DESIGN EZ PTFE
DISK WITH ALLOY 6B TRIM PARTS IS 177C (350F) AND WITH
N05500 TRIM PARTS IS 204C (400F).
A6570/IL
Figure 5. Pressure and Temperature Information for Micro-Flute Valve Plugs with PTFE Seats
Micro-Flute Valve Plugs for Minimum

Leakage
The Design EZ valve can be furnished with PTFE
composition-seat Micro-Flute valve plugs for Class
VI shutoff per ANSI/FCI 70-2 and IEC 60534-4.
These valve plugs are available on 0.5 to 2-inch
valves with a 9.5 mm (3/8 inch) stem diameter, 9.5
mm (3/8 inch) actuator-stem connection, and 6.4

mm (0.25 inch) seat ring port diameter. These plugs
have the same flow coefficients as standard
Micro-Flute plugs. Standard seat rings are used.
The valve plugs have a screwed retainer that holds
the seat disk and valve plug tip to the valve stem.
See figure 5 for pressure and temperature
information.
Product Bulletin
51.1:EZ
July 2005
EZ Valve
Table 3. Material Cross Reference

Standard Designation
CB7Cu-1
CF8M
CoCr-A
WC9
N04400
N05500
M35-1
Common/Tradename
Other Designation
Standard Designation
17-4 PH Stainless Steel

316 Stainless Steel
Alloy 6 Hardfacing
Chrome-Moly Steel
Monel 400
K-Monel, Alloy K500
Monel
R30006
S17400
S31600
S31603
S41600
WCC
Alloy 6B
Common/Tradename
Other Designation
Alloy 6, Cast
17-4 PH Stainless Steel
316 Stainless Steel
316L Stainless Steel
416 Stainless Steel
WCC Steel
Alloy 6, Wrought
2
NOTES:
1 ALSO APPLIES TO TRIMS 101C, 127C,
137C, 151C, 153C, 154C, AND 158C.
2 ALSO APPLIES TO TRIMS 104C, 128C,
129C, 139C, 152C, 155C, 156C, AND 157C.
A6415/IL
PTFE SEATING WITH

ALL VALVE BODY MATERIALS
(29C [20F] WITH WCC
VALVE BODY)
Figure 6. Typical PTFE Seat Trim
Class VI Shutoff Capabilities

Design EZ valves with metal seat constructions can
provide ANSI/FCI Class VI shutoff capabilities. See
tables 1 and 2.
Product Bulletin
51.1:EZ
July 2005
EZ Valve
Table 4. Typical Combinations of Metal Trim Parts for Equal Percentage (Including Micro-Form), Linear, and Quick Opening Valve Plugs
Trim
Designation
101(1)
104
120
127
128
129(2)
137
139
Valve
Plug
S41600
(416 stainless steel)
hardened
S31600
N05500 (K-Monel)
S31600 w/CoCr-A
(alloy 6)
seat & guide
S31600
w/CoCr-A seat
S31600
S31600
w/CoCr-A
seat & guide
S31600
w/CoCr-A seat
Valve
Stem
Seat
Ring
Disk Seat and

Retainer for
Optional PTFE-Seat
Construction
Seat Ring
Retainer
Guide
Bushing
S31600
S41600
hardened
CB7Cu-1
(17-4 PH
stainless steel)
S41600
S17400
(17-4 PH
stainless steel)
S31600
S31600
CB7Cu-1
S31600
S17400
N05500
N05500
M35-1 (Monel)
N05500
N05500
S31600
S31600
w/CoCr-A seat
CF8M
---
Alloy 6B
S31600
S31600
w/CoCr-A seat
CF8M
---
Alloy 6B
S31600
S31600
CF8M
S31600
Alloy 6B
S31600
S31600
w/CoCr-A seat
CB7Cu-1
---
S17400
S31600
S31600
w/CoCr-A seat
CB7Cu-1
---
S17400
1. Standard trim for cast iron, WCC, and WC9 valve bodies, except Micro-Flow and Micro-Flute.
2. Standard trim for CF8M valve body.
Table 5. Typical Combinations of Metal Trim Parts for Micro-Flute and Micro-Flow Valve Plugs (These Constructions Do Not
Use Guide Bushing)
Trim
Designation
151
152(2)
Valve
Plug
S41600
hardened
S31600
w/CoCr-A (alloy 6)
seat, R30006 tip
Valve
Stem
Seat
Ring
Seat Ring
Retainer
Disk Seat and

Retainer for
Optional PTFE-Seat
Construction(1)
S31600
S41600 hardened
CB7Cu-1
(17-4 PH stainless steel)
S31600
S31600
CB7Cu-1
S31600
N05500
---
153
N05500 (K-Monel)
N05500
N05500
M35-1 (Monel)
154
S31600 w/CoCr-A
seat, R30006 tip
S31600
S31600
w/CoCr-A seat & bore
CF8M
---
155
S31600 w/CoCr-A
seat, R30006 tip
S31600
S31600
w/CoCr-A seat(3)
CF8M
---
156
S31600 w/CoCr-A
seat, R30006 tip
S31600
S31600
CF8M
S31600
157
S31600 w/CoCr-A
seat, R30006 tip
S31600
S31600
w/CoCr-A seat(3)
CB7Cu-1
---
158
S31600 w/CoCr-A
seat, R30006 tip
S31600
S31600
CB7Cu-1
---
1. Micro-Flute constructions.
2. Standard trim for Micro-Flow and Micro-Flute constructions in cast iron, WCC, CF8M, and WC9 valve bodies.
3. Micro-Flute and Micro-Flow valve plugs have a CoCr-A seat and R30006 tip, but are not recommended for erosive service without the additional use of CoCr-A on the seat and bore
of the seat ring.
Product Bulletin
51.1:EZ
July 2005
EZ Valve
Table 6. Construction Materials and Temperature Limits

PART
TEMPERATURE
CAPABILITIES
MATERIAL
C
Body-toBody
to
bonnet
bolting.
See table
17 for
NACE
bolting
materials
and
d
temperatures
Cast iron valve body

WCC steel body
CF8M (316 stainless

steel)) bodyy
Seat disk (optional)

Bonnet and
seat ring
gasket
Spiral wound
gaskets
232(1)
20
450(1)
29
29
427
20
20
800
48
48
427
55
55
800
198
198
38
325
325
100
198
198
427
325
325
800
73
204
100
400
198
593(4)
325
PTFE-coated N04400 (Monel) (optional for trim 120)
73
149
100
300
N04400/composition (standard for trims 120 & 153)
73
232
100
450
N04400/PTFE (optional for trims 120 & 153)
73
149
100
N06600 (Inconel)/graphite (FGM) standard
198
593(4)
325
Steel SAE Grade 5
Studs
Steel SA-193-B7
Nuts
Steel SA-194-2H (lubricated)
Studs
Steel SA-193-B7 (standard)
Nuts
Steel SA-194-2H (standard)
Studs
304 stainless steel SA-320-B8
Nuts
304 stainless steel SA-194-8
Studs
316 stainless steel SA-193-B8M (strain hardened)
Nuts
316 stainless steel SA-194-8M (lubricated)

PTFE
S31600 (316 stainless
steel)/graphite(2)
1100(4)
300
1100(4)
These materials not

limiting factors
These materials not
limiting factors
S31600
Shim
N04400 (standard for trims 120 & 153)
Packing flange studs and nuts when
used with standard bonnet
F
29
Cap screws
S31600
198
593
325
1100
PTFE V-ring
40
232
40
450
PTFE/composition
73
232
100
450
Graphite ribbon/filament
198
538(5)
325
1000(5)
Graphite ribbon for high-temperature oxidizing service
198
649
325
1200
Packing
follower
S31600(2)
198
593
325
1100
N04400 (optional for trims 120 & 153)
198
482
325
900
Packing spring
S31600
198
593
325
1100
Lantern ring
(for double
packing)
S31600(3)
198
593
325
1100
N04400 (standard for trims 120 & 153)
198
482
325
900
Packing box
ring
S31600(3)
198
593
325
1100
N04400
198
482
325
900
Packing
(temperatures
shown are
material
temperature
capabilities).
See table 8
for proper
bonnet
selection
1. Temperature limit for bodies with screwed end connections is 208C (406F).
2. Standard for all trim.
3. Standard for all trim except for trim 120 and 153.
4. Except 427C (800F) for oxidizing service.
Product Bulletin
51.1:EZ
July 2005
EZ Valve
Table 7. Valve Body/Trim Temperature Capabilities for Metal Trim Parts
TEMPERATURE CAPABILITIES
VALVE BODY
MATERIAL
VALVE BODY SIZE,

INCHES
0.5, 0.75, 1, 1.5, or 2
Cast iron
3 or 4
0.5, 0.75, 1, 1.5, or 2
WCC
CC steel
05 0
0.5,
0.75,
75 1
1, or 1
1.5
5
CF8M
((316 stainless steel))
Trim for Equal Percentage

(Including Micro-Form), Linear,
and Quick Opening Valve Plugs
C
F
Trim
Designation
Min
Max
Min Max
Trim
Designation
C
Min
F
Max
Min
Max
101
29
232
20
450
151
29
232
20
450
120
73
232
100 450
153
73
232
100
450
87, 127, 137
73
232
100 450
154, 158
73
232
100
450
85, 86, 128, 129
73
232(1) 100 450(1)
---
---
---
---
139, 104
73
232(1) 100 450(1)
73
149
100
300
101
29
232
---
---
---
---
---
104, 139
73
232(1) 100 450(1)
---
---
---
---
---
120
73
232
100 450
---
---
---
---
---
87, 127
73
232
100 450
---
---
---
---
---
85, 86, 128, 129
73
232(1) 100 450(1)
---
---
---
---
---
137
73
232
100 450
---
---
---
---
---
101
29
427
20
104, 139
29
120
20
--152, 155, 156, 157
450
800
151
29
316
20
600
427(1) 20
800(1)
152, 157
29
149
20
300
29
316
20
600
153
29
316
20
600
87, 127
29
260
20
500
154
29
427
20
800
86, 128
29
260(1) 20
500(1)
---
---
---
---
85, 129
29
260(1) 20
500(1)
156
29
149
20
300
137
29
427
20
800
158
29
427
20
800
101
29
427
20
800
---
---
---
---
---
104, 139
29
371(1) 20
700(1)
---
---
---
---
---
120
29
316(1) 20
600(1)
---
---
---
---
---
87, 127
29
371
700
---
---
---
---
---
85, 86, 128, 129
29
371(1) 20
700(1)
---
---
---
---
---
137
29
371
20
700
---
---
---
---
---
101
29
427
20
800
---
---
---
---
---
104, 139
29
371(1) 20
700(1)
---
---
---
---
---
120
29
316(1) 20
600(1)
---
---
---
---
---
87, 127
29
338
640
---
---
---
---
---
85, 86, 128, 129
29
338(1) 20
640(1)
---
---
---
---
---
137
29
371
20
700
---
---
---
---
---
101
29
354
20
670
151
29
316
20
600
104
101
371(1) 150 700(1)
152
101
149
150
300
120
198
316
325 600
153
198
316
325
600
87, 127
198
260
325 500
154
198
593
325
1100
86, 128
198
260(1) 325 500(1)
---
---
---
---
85, 129
198
260(1) 325 500(1)
156
198
149
325
300
137
101
371
158
101
371
150
700
139
101
371(1) 150 700(1)
157
101
149
150
300
101
29
288
151
29
288
20
550
104
101
299(1) 150 570(1)
152
101
149
150
300
120
198
316
325 600
153
198
316
325
600
87, 127
198
260
325 500
154
198
593
325
1100
86, 128
198
260(1) 325 500(1)
---
---
---
---
85, 129
198
260(1) 325 500(1)
156
198
149
325
300
137
101
299
158
101
299
150
570
139
101
299(1) 150 570(1)
157
101
149
150
300
-continued-
10
Trim for Micro-Flute and

Micro-Flow Valve Plugs
20
20
150 700
20
550
150 570
---
---
---
Product Bulletin
51.1:EZ
July 2005
EZ Valve
Table 7. Valve Body/Trim Temperature Capabilities for Metal Trim Parts (Continued)
TEMPERATURE CAPABILITIES
VALVE BODY
MATERIAL
VALVE BODY SIZE,

INCHES
CF8M
((316 stainless steel))
05 0
0.5,
0.75,
75 1
1, 1
1.5,
5 or 2
WC9 chrome moly

steel
Trim for Equal Percentage

(Including Micro-Form), Linear,
and Quick Opening Valve Plugs
C
F
Trim
Designation
Min
Max
Min Max
20
Trim for Micro-Flute and

Micro-Flow Valve Plugs
Trim
Designation
420
C
F
Min
Min
Min
---
---
---
---
---
Max
101
29
216
104, 139
101
227(1) 150 440(1)
---
---
---
---
---
120
198
316
325 600
---
---
---
---
---
87, 127
198
377
325 700
---
---
---
---
---
85, 86, 128, 129 198
377(1) 325 700(1)
---
---
---
---
---
137
101
227
150 440
---
---
---
---
---
101
29
177
20
---
---
---
---
---
104, 139
101
182(1) 100 360(1)
---
---
---
---
---
120
198
316
100 600
---
---
---
---
---
87, 127
198
371
100 700
---
---
---
---
---
350
85, 86, 128, 129 198
371(1) 100 700(1)
---
---
---
---
---
137
101
182
100 360
---
---
---
---
---
101
29
427
20
151
29
29
20
600
104
29
427(1) 20
800(1) 152
29
29
20
300
120
29
316
20
600
153
29
29
20
87, 127
29
260
20
500
154
29
29
20
86, 128
29
260(1) 20
500(1)
---
---
---
---
85, 129
29
260(1) 20
500(1) 156
29
29
20
300
137
29
427
800
158
29
29
20
800(1)
139
29
427(1) 20
800(1) 157
29
29
20
300
101
29
427
800
---
---
---
---
---
104, 139
29
371(1) 20
700(1)
---
---
---
---
---
120
29
316
20
600
---
---
---
---
---
87, 127
29
343
20
650
---
---
---
---
---
20
20
800
---
600
1050(2)
85, 86, 128, 129 29
343(1) 20
650(1)
---
---
---
---
---
137
29
371
20
700
---
---
---
---
---
101
29
427
20
800
---
---
---
---
---
104, 139
29
371(1) 20
700(1)
---
---
---
---
---
120
29
316
20
600
---
---
---
---
---
87, 127
29
316
20
450
---
---
---
---
---
85, 86, 128, 129 29
232(1) 20
450(1)
---
---
---
---
---
137
371
700
---
---
---
---
---
29
20
1. With non-lubricating fluids, temperature is limited to 149C (300F).

2. For 2-inch valve body, maximum temperature is 466C (870F).
11
Product Bulletin
51.1:EZ
July 2005
EZ Valve
Table 8. Bonnet Selection Guidelines
BONNET STYLE
Plain:
Standard for 0.5, 0.75, 1-, and 1.5
inch valves with 2-1/8 inch yoke boss
diameter
Standard for 2-, 3-, and 4-inch
valves with 2-13/16
2 13/16 inch yoke boss
diameter
Optional for 2-, 3-, and 4-inch
valves with 3-9/16 inch yoke boss
diameter
IN-BODY PROCESS TEMPERATURE LIMITS(1)
PACKING MATERIAL
C
F
PTFE V-ring
18 to 232
0 to 450
PTFE/Composition
18 to 232
0 to 450
0 to maximum shown
in table 6
0 to maximum shown
in table 6
46
46 to 232
50
50 to 450
46 to 18 and above 232
101
101 to 232
150
150 to 450
Style 1 Cast Extension:

for all valve sizes.
Optional
p
Ch k yoke
k boss
b
di
Check
diameter
PTFE V-ring
Style 2 Cast Extension:

for all valve sizes.
Optional
p
Ch k yoke
k boss
b
di
Check
diameter
PTFE V-ring
PTFE/Composition
PTFE/Composition
For exceptional stem sealing capabilities. See

Bulletin 59.1:070, ENVIRO-SEAL Bellows Seal
Bonnets, for pressure/temperature ratings.
For exceptional stem sealing capabilities. See
Bulletin 59.1:070, ENVIRO-SEAL Bellows Seal
Bonnets, for pressure/temperature ratings.
PTFE
ENVIRO SEAL bellows seal bonnet
ENVIRO-SEAL
Graphite
1. These in-body process temperatures assume an outside, ambient temperature of 21C (70F). When using any packing at low process temperatures, a cast extension bonnet may
have to be used to prevent packing damage which could result from the formation of valve stem frost.
Table 9. Maximum Allowable Pressure Drops per Trim Designation for Equal Percentage (Including Micro-Form), Linear, and
Quick Opening Valve Plugs
TRIM
DESIGNATION
101
104
120
87, 127
86, 128
85, 129
137
139
12
VALVE
PLUG
S41600
hardened
S31600
N05500 (K-Monel)
S31600 w/CoCr-A
(alloy 6)
seat & guide
S31600
w/CoCr-A seat
S31600
S31600
w/CoCr-A
seat & guide
S31600
w/CoCr-A seat
VALVE
STEM
SEAT
RING
SEAT RING
RETAINER
GUIDE
BUSHING
SHUTOFF FLOWING
PRESSURE PRESSURE
DROP
DROP
Bar Psig Bar Psig
S31600
S41600
hardened
CB7Cu-1
(17-4 PH
stainless steel)
S17400
(17-4 PH
stainless steel)
S31600
S31600
CB7Cu-1
S17400
21
300
103
1500
N05500
N05500
M35-1 (Monel)
N05500
55
800
103
1500
S31600
S31600
w/CoCr-A seat
CF8M
Alloy 6B
103
1500 103
1500
S31600
S31600
w/CoCr-A seat
CF8M
Alloy 6B
103
1500 103
1500
S31600
S31600
CF8M
Alloy 6B
21
S31600
S31600
w/CoCr-A seat
CB7Cu-1
S17400
S31600
S31600
w/CoCr-A seat
CB7Cu-1
S17400
103
1500 103
300
1500
103
1500
103
1500 103
1500
103
1500 103
1500
Product Bulletin
51.1:EZ
July 2005
EZ Valve
Table 10. Maximum Allowable Pressure Drops per Trim Designation for Micro-Flute and Micro-Flow Valve Plugs
TRIM
DESIGNATION
151
152
VALVE
PLUG
S41600
hardened
S31600
w/CoCr-A (alloy 6)
seat, R30006 tip
VALVE
STEM
SEAT
RING
SHUTOFF
PRESSURE
DROP
Bar Psig
SEAT RING
RETAINER
S31600
S41600 hardened
CB7Cu-1
(17-4 PH stainless steel)
S31600
S31600
FLOWING
PRESSURE
DROP
Bar Psig
103
1500
103
1500
CB7Cu-1
21
300
103
1500
153
N05500 (K-Monel)
N05500
N05500
M35-1 (Monel)
55
800
103
1500
87, 154
S31600 w/CoCr-A
seat, R30006 tip
S31600
S31600
CF8M
103
1500
103
1500
86, 155
S31600 w/CoCr-A
seat, R30006 tip
S31600
S31600
w/CoCr-A seat
CF8M
103
1500
103
1500
85, 156
S31600 w/CoCr-A
seat, R30006 tip
S31600
S31600
CF8M
21
300
103
1500
157
S31600 w/CoCr-A
seat, R30006 tip
S31600
S31600
w/CoCr-A seat
CB7Cu-1
103
1500
103
1500
158
S31600 w/CoCr-A
seat, R30006 tip
S31600
S31600
CB7Cu-1
103
1500
103
1500
Table 11. Gasket Selection Guidelines(1)

Shim
Temperature
Capabilities
N06600 (Inconel)/
graphite(3)
S31600
198 to 593C(4)
(325 to 1100F)(4)
PTFE-coated N04400
N04400/PTFE
N04400
73 to 149C
(100 to 300F)
316 SST/graphite
flat sheet
N04400/composition
N04400
73 to 232C
(100 to 450F)
Gasket Set
Seat Ring Gasket
Bonnet Gasket
2(2)
316 SST/graphite
flat sheet
316 SST/graphite
flat sheet
PTFE-coated N04400
(Monel)
316 SST/graphite
flat sheet
Spiral
Wound Gasket
1. See Bulletin 59.1:070, ENVIRO-SEAL Bellows Seal Bonnets, for bellows gasket information.
2. FGM gasket set.
3. This material should be used for cyclic temperatures or those above 232C (450F).
13
Product Bulletin
51.1:EZ
July 2005
EZ Valve
Table 12. Maximum Allowable Pressure Drops (Flow Up Only)(1) for Gasket Materials (0.5 through 1.5 Inch Valve Size)
BAR(2)(3)
TEMPER
TEMPERATURE,
ATURE
)( )
C
C((4)(5)
Valve Body Size, Inches

0.5, 0.75, & 1
1.5
Port Diameter, mm
4.8
& 6.4
9.5
67.6
56.5
68.3
57.2
12.7
19.1
25.4
4.8
& 6.4
9.5
12.7
19.1
25.4
38.1
61.3
51.0
63.4
53.1
72.4
60.0
N04400 (Monel)/Composition Spiral Wound Gasket (Gasket Set 4)

253 to 38
93
149
204
232
69.0
57.9
72.4
60.0
76.5
64.1
58.6
49.0
59.0
49.3
59.3
49.6
47.6
48.3
49.0
51.0
53.8
41.4
41.8
42.1
43.4
44.8
51.0
43.4
43.8
44.1
46.2
49.0
37.9
37.9
37.9
39.3
40.7
46.2
42.1
42.6
43.1
44.8
47.6
36.5
36.7
36.9
38.3
39.6
44.8
N06600 (Inconel)/Graphite Spiral Wound Gasket (Gasket Set 2) or N04400 (Monel)/PTFE Spiral Wound Gasket (Gasket Set 3)(5)
253 to 38
93
149
204
94.5
89.6
85.5
81.4
96.2
91.4
87.2
83.1
97.9
93.1
88.9
84.8
104.1
98.6
94.5
89.6
114
108
103
98.6
77.9
73.8
70.3
66.9
79.0
74.5
71.4
68.0
80.0
75.2
72.4
69.0
82.7
78.6
75.2
71.0
87.6
82.7
79.3
75.2
105
99.3
94.5
90.3
260
316
371
427
78.6
76.5
73.8
71.0
80.4
77.9
75.2
72.4
82.1
79.3
76.5
73.8
86.9
84.1
81.4
78.6
95.2
92.4
88.9
86.2
64.8
62.7
60.7
58.6
65.5
63.4
61.4
59.3
66.2
64.1
62.1
60.0
69.0
66.9
64.8
62.1
73.1
71.0
68.3
66.2
87.6
84.8
81.4
78.6
0.5
0.75
1.5
890
740
920
770
1050
870
TEMPERTEMPER
ATURE,
F(4)(5)
PSI(2)(3)
Port Diameter, Inches
0.1875
& 0.25
0.375
980
820
990
830
0.5
0.75
0.1875
& 0.25
0.375

425 to 100
200
300
400
450
1000
840
1050
870
1110
930
850
710
855
715
860
720
690
700
710
740
780
600
605
610
630
650
740
630
635
640
670
710
550
550
550
570
590
670
610
618
625
650
690
530
535
535
555
575
650
425 to 100
200
300
400
1370
1300
1240
1180
1395
1325
1265
1205
1420
1350
1290
1230
1510
1430
1370
1300
1660
1570
1500
1430
1130
1070
1020
970
1145
1080
1035
985
1160
1090
1050
1000
1200
1140
1090
1030
1270
1200
1150
1090
1520
1440
1370
1310
500
600
700
800
1140
1110
1070
1030
1165
1130
1090
1050
1190
1150
1110
1070
1260
1220
1180
1140
1380
1340
1290
1250
940
910
880
850
950
920
890
860
960
930
900
870
1000
970
940
900
1060
1030
990
960
1270
1230
1180
1140
1. Design EZ should not be used in flow down service including on-off applications.
2. Pressure drop cannot exceed maximum inlet pressure as indicated in the specifications on page 2.
3. The trim may be further limited by maximum pressure drops listed in tables 9 and 10.
4. Pressure drops at intermediate temperatures may be interpolated.
5. Maximum temperature capability of PTFE-coated N04400 (Monel) gaskets as used in gasket set 3 is 149C (300F).
14
Product Bulletin
51.1:EZ
July 2005
EZ Valve
Table 13. Maximum Allowable Pressure Drops (Flow Up Only)(1) for Gasket Materials (2- through 4-Inch Valve Size)
BAR(2)(3)
TEMPER
TEMPERATURE,
ATURE
)( )
C
C((4)(5)

2
Port Diameter, mm
4.8
& 6.4
9.5
52.4
43.4
52.8
43.8
12.7
19.1
25.4
50.8
50.8
76.2
50.8
101.6
70.3
58.6
49.0
40.7
73.8
61.4

253 to 38
93
149
204
232
53.1
44.1
54.5
45.5
55.8
46.9
70.3
58.6
55.2
46.2
37.2
37.2
37.2
37.9
39.3
49.6
38.6
49.6
34.5
51.7
33.8
33.8
33.8
34.5
35.9
44.8
35.2
45.5
31.0
46.9
32.8
32.8
32.8
33.4
34.8
43.4
34.1
44.1
30.3
45.5
253 to 38
93
149
204
67.6
63.4
60.7
57.9
68.2
64.1
61.4
58.3
68.7
64.8
62.1
58.6
70.3
66.9
63.4
60.7
73.1
69.6
66.2
62.7
101
95.8
91.7
86.9
69.6
66.2
62.7
60.0
97.2
92.4
88.3
83.4
65.5
62.1
58.6
55.8
114
108
103
97.9
260
316
371
427
55.8
54.5
52.4
50.3
56.5
54.9
52.8
51.0
57.2
55.2
53.1
51.7
58.6
56.5
55.2
53.1
61.4
59.3
57.2
55.2
84.1
81.4
78.6
75.8
57.9
56.5
54.5
52.4
81.4
78.6
75.8
73.1
54.5
52.4
51.0
49.0
94.5
91.7
88.3
85.5
1020
850
710
590
1070
890
TEMPERTEMPER
ATURE,
F(4)(5)
PSI(2)(3)
Port Diameter, Inches
0.1875
& 0.25
0.375
760
630
765
635
0.5
0.75

425 to 100
200
300
400
450
770
640
790
660
810
680
1020
850
800
670
540
540
540
550
570
720
560
720
500
750
490
490
490
500
520
650
510
660
450
680
475
475
475
485
505
630
495
640
440
660
425 to 100
200
300
400
980
920
880
840
985
930
890
845
990
940
900
850
1020
970
920
880
1060
1010
960
910
1470
1390
1330
1260
1010
960
910
870
1410
1340
1280
1210
950
900
850
810
1650
1560
1490
1420
500
600
700
800
810
790
760
730
820
795
765
740
830
800
770
750
850
820
800
770
890
860
830
800
1220
1180
1140
1100
840
820
790
760
1180
1140
1100
1060
790
760
740
710
1370
1330
1280
1240
1. Design EZ should not be used in flow down service including on-off applications.
2. Pressure drop cannot exceed maximum inlet pressure as indicated in the specifications on page 2.
3. The trim may be further limited by maximum pressure drops listed in tables 9 and 10.
4. Pressure drops at intermediate temperatures may be interpolated.
5. Maximum temperature capability of PTFE-coated N04400 (Monel) gaskets as used in gasket set 3 is 149C (300F).
15
Product Bulletin
51.1:EZ
July 2005
EZ Valve
Table 14. Maximum Flow Coefficient for Full-Sized Trim with Equal Percentage
Characteristic and Normal Flow Direction(1)
Cv at Max Valve Plug Travel
0.5
4.47
0.75
9.00
13.2
1.5
28.1
53.8
114
190
1. Flow coefficients for linear and quick-opening valve plugs normally are somewhat greater.
Table 15. Port Diameters, Valve Plug Travel, and Stem and Yoke Boss Diameters
PORT DIAMETER, mm
VALVE BODY
SIZE, INCHES
Equal
Percentage(1)
Quick
Opening
Linear
MAX VALVE
PLUG TRAVEL,
mm
0.5 or 0.75
4.8(2), 6.4(3), 9.5, 12.7, 19.1, 25.4
25.4
---
4.8(2), 6.4(3), 9.5, 12.7, 19.1, 25.4
25.4
25.4
1.5
4.8(2), 6.4(3), 9.5, 12.7, 19.1, 25.4, 38.1
38.1
38.1
4.8(2), 6.4(3), 9.5, 12.7, 19.1, 25.4, 50.8
50.8
50.8
29
50.8, 76.2
76.2
76.2
38
50.8, 101.6
101.6
101.6
51
0.5 or 0.75
0.1875(2), 0.25(3), 0.375, 0.5, 0.75, 1
0.1875(2), 0.25(3), 0.375, 0.5, 0.75, 1
1.5
0.1875(2), 0.25(3), 0.375, 0.5, 0.75, 1, 1.5
1.5
1.5
0.1875(2), 0.25(3), 0.375, 0.5, 0.75, 1, 2
1.125
2, 3
1.5
2, 4
19
VALVE STEM AND YOKE BOSS

DIAMETERS, mm
Standard
Optional
Stem
Yoke
Boss
Stem
Yoke
Boss
9.5
54
12.7
71
12.7
71
19.1
90
3/8
2-1/8
2
1/8
1/2
2-13/16
2
13/16
1/2
2-13/16
2
13/16
3/4
3-9/16
3
9/16
Inches
--0.75
1. 6.4 through 19.1 mm (0.25 through 0.75-inch) port diameters use Micro-Form valve plug.
2. Micro-Flow valve plug.
3. Also available in 1-flute and 3-flute Micro-Flute valve plugs.
Table 16. Typical Combinations of Metal Trim Parts for Equal Percentage (Including Micro-Form), Linear, and Quick Opening
Valve Plugs for Compatibility with NACE MR0175-2002 (Sour Service) Specifications, Environmental Restrictions Apply, Refer to
Standard
Trim
Designation
85
85C(1)
86
87
87C(1)
Valve Plug
S31600
S31600/PTFE
S31600
w/CoCr-A (alloy 6) seat
S31600
w/CoCr-A seat & guide
S31600/PTFE
w/CoCr-A guide
1. 85C and 87C are trims for PTFE-seat construction.
16
Seat Ring
Retainer
CF8M
CF8M
Bushing
Seat Ring
Alloy 6B
S31600
Alloy 6B
S31600
CF8M
Alloy 6B
S31600/CoCr-A
CF8M
Alloy 6B
S31600/CoCr-A
CF8M
Alloy 6B
S31600
Valve Stem, Packing

Follower, Lantern Ring,
Packing Box Ring,
Pins, and
Disk Retainer
S20910
(Valve Stem)
S3 600
S31600
(All Other
Parts)
Product Bulletin
51.1:EZ
July 2005
EZ Valve
Table 17. Bolting Materials and Temperature Limits for Bolting Compliance with NACE MR0175-2002
VALVE BODY
MATERIAL
TEMPERATURE
CAPABILITIES
BOLTING MATERIAL
C
Min
F
Max
Min
Max
427
55
55(1)
800
55(1)
55
800
NACE MR0175-2002 (non-exposed bolting) (Standard)

WCC and
CF8M (316 SST)
Studs
Steel SA-193-B7
Nuts
Steel SA-194-2H
48
48(1)
NACE MR0175-2002 (exposed bolting) (Optional)

Requires Derating of Valve(2) When These Body-to-Bonnet Bolting Materials are Used
WCC and
CF8M
Studs
Steel SA-193-B7M
Nuts
Steel SA-194-2HM
48(1)
48
427
1. 29C (20F) with WCC valve body material.

2. Derating is not required for Class 300 valves. Derating is required for valves rated at Class 600 and above. Contact your Fisher sales office for assistance in determining the derating
of valves when these body-to-bonnet bolting materials are used.
Table 18. ENVIRO-SEAL Bellows Seal Bonnet

Dimensions
D
VALVE
SIZE,
SIZE
INCHES
ENVIROSEAL Bellows Seal Bonnet

Stem Diameter, mm
Stem Diameter, Inches
9.5
12.7
19.0
3/8
1/2
3/4
321
---
---
12.62
---
---
1.5
317
---
---
12.50
---
---
---
384
---
---
15.12
---
---
518
518
---
20.38
20.38
---
541
---
---
21.31
---
Ordering Information
12B7185A
A6115-1/IL
NOTES:
FOR A AND G DIMENSIONS, SEE FIGURE 8
1
2 B=A/2
Figure 7. ENVIRO-SEAL Bellows Seal Bonnet Dimensions

(also see table 18)
Inlet pressure and temperature must always be

limited by the applicable ANSI pressure/temperature
rating. Pressure drop information for various trim
material combinations is provided in tables 10 and
11. Pressure drop information for gasket materials is
listed in tables 12 and 13. The maximum allowable
pressure drop for the application must not exceed
the lowest value indicated for the combination of
materials selected.
17
Product Bulletin
51.1:EZ
July 2005
EZ Valve
Table 19. Standard Dimensions
D
Plain
Bonnet
SIZE INCHES
VALVE SIZE,
Extension Bonnet
Style 1
Style 2
Stem Diameter, mm
9.5
12.7
19.0
9.5
12.7
19.0
9.5
12.7
19.0
0.5 or 0.75
127
149
---
213
251
---
303
319
---
127
149
---
213
251
---
303
319
---
1.5
124
146
---
210
248
---
300
316
---
---
165
162
---
267
272
---
465
---
---
191
187
---
292
297
---
495
487
---
221
217
---
322
327
---
526
518
Stem Diameter, Inches

3/8
1/2
3/4
3/8
1/2
3/4
3/8
1/2
3/4
0.5 or 0.75
5.00
5.88
---
8.38
9.88
---
11.94
12.56
---
5.00
5.88
---
8.38
9.88
---
11.94
12.56
---
1.5
4.88
5.75
---
8.25
9.75
---
11.81
12.44
---
---
6.50
6.38
---
10.50
10.69
---
18.31
---
---
7.50
7.38
---
11.50
11.69
---
19.50
19.19
---
8.69
8.56
---
12.69
12.88
---
20.69
21.38
Table 20. Standard Dimensions

A
Scrd
or
SWE
125FF
or
150RF
150
RTJ
250RF
or
300RF
300
RTJ
0.5 or 0.75
165
---
---
---
---
---
---
---
---
55
210
184
197
197
210
210
210
160
230
60
1.5
251
222
235
235
248
251
251
200
260
71
286
254
267
267
282
286
289
230
300
78
---
298
311
317
333
337
340
310
380
97
---
353
365
368
384
394
397
350
430
129
0.5 or 0.75
6.50
---
---
---
---
---
---
2.12
8.25
7.25
7.75
7.75
8.25
8.25
8.25
2.38
1.5
9.88
8.75
9.25
9.25
9.75
9.88
9.88
11.25
10.00
10.50
10.50
11.12
11.25
11.38
---
11.75
12.25
12.50
13.12
13.25
13.38
3.81
---
13.88
14.38
14.50
15.12
15.50
15.62
5.06
VALVE SIZE, INCHES
BW
or
600RF
600
RTJ
DIN
DIN
PN16-40(1) PN63-100(1)
G (MAX)
mm
Inches
See
mm
See
mm
2.81
3.06
1. Valves which meet DIN flange standards and have DIN face-to-face dimensions are available only from Europe. Valves which meet DIN flange stands but not DIN face-to-face
standards are available in the US. Consult your Fisher sales office
18
Product Bulletin
51.1:EZ
July 2005
EZ Valve
MATCH LINE
FOR
ACTUATOR
1
B
A
NOTES:
1
AR4967A
A09252 / IL
B+
A
2
DESIGN EZ BODY
Figure 8. Standard Dimensions (also see tables 19 and 20)
19
Product Bulletin
51.1:EZ
July 2005
EZ Valve
Coefficients
Table 21. Design EZ, Quick Opening Valve Plug
Quick Opening
Valve
Size,
Inches
0.5
0.75
Port
Diameter
mm
25.4
25.4
25 4
25.4
38 1
38.1
Inches
1
15
1.5
Quick Opening
Characteristic
Maximum
Travel(1)
mm
19
19
19
19
Inches
0.75
0.75
0 75
0.75
0 75
0.75
1.5
25 4
25.4
(4)
50 8
50.8
(4)
19
29
0.75
1 125
1.125
2
25 4
25.4
(4)
76 2
76.2
(4)
19
38
0.75
15
1.5
3
50 8
50.8
(4)
101 6
101.6
(4)
29
51
1.125
4
50 8
50.8
(4)
(4)
29
1.125
Flow
Coefficient
Coeffs. for
6 mm
(0 25 Inch)
(0.25
Travel(2)
10
20
30
40
50
60
70
80
90
100
Cv
---
1.76
3.29
4.29
4.44
4.44
4.44
4.44
4.44
4.44
4.44
0.83
Kv
---
1.52
2.85
3.71
3.84
3.84
3.84
3.84
3.84
3.84
3.84
---
XT
---
0.364 0.649 0.764 0.863 0.894 0.894 0.894 0.894 0.894 0.894
---
Cv
---
3.85
7.19
9.40
9.72
9.72
9.72
9.72
9.72
9.72
9.72
0.88
6.22
8.13
8.41
8.41
8.41
8.41
8.41
8.41
8.41
---
Valve OpeningPercent of Total Travel
Kv
---
3.33
XT
---
0.314 0.559 0.654 0.742 0.769 0.769 0.769 0.769 0.769 0.769
---
Cv
14.7
4.39
10.3
14.0
15.5
16.2
16.6
16.8
16.8
16.9
16.9
0.94
8.91
12.1
13.4
14.0
14.4
14.5
14.5
14.6
Kv
12.7
3.80
14.6
---
XT
14.7
0.400 0.449 0.523 0.539 0.535 0.512 0.500 0.500 0.494 0.494
---
Fd
---
0.20
0.29
0.39
0.48
0.50
0.50
0.50
0.50
0.50
0.50
---
Cv
22.6
5.64
11.9
20.6
27.4
30.5
32.4
33.4
33.7
34.1
34.2
0.96
10.3
17.8
23.7
26.4
28.0
28.9
29.2
29.5
Kv
19.5
4.88
29.6
---
XT
22.6
0.623 0.734 0.726 0.814 0.843 0.857 0.861 0.860 0.853 0.848
---
Fd
---
0.16
0.24
0.32
0.39
0.45
0.50
0.50
0.50
0.50
0.50
---
Cv
15.7
4.17
8.94
14.6
17.4
18.3
18.8
18.9
19.0
19.1
19.4
0.90
7.73
12.6
15.1
15.8
16.3
16.3
16.4
16.5
16.8
---
Kv
13.6
3.61
XT
15.7
0.617 0.791 0.793 0.904 0.925 0.924 0.922 0.915 0.905 0.878
---
Cv
34.0
13.0
30.1
44.3
52.4
56.4
57.8
58.4
58.5
58.6
58.6
0.94
11.2
26.0
38.3
45.3
48.8
50.0
50.5
50.6
50.7
Kv
29.4
50.7
---
XT
34.0
0.548 0.663 0.765 0.813 0.818 0.833 0.831 0.836 0.834 0.834
---
Fd
---
0.17
0.28
0.36
0.43
0.49
0.50
0.50
0.50
0.50
0.50
---
Cv
15.8
4.35
9.79
14.9
16.6
17.3
17.5
17.5
17.6
17.7
17.9
0.86
8.47
12.9
14.4
15.0
15.1
15.1
15.2
15.3
15.5
---
Kv
13.7
3.76
XT
15.8
0.524 0.594 0.695 0.877 0.937 0.944 0.958 0.952 0.942 0.921
---
Cv
53.8
30.8
65.1
92.4
110
118
123
126
128
129
129
0.91
56.3
79.9
95.2
102
106
109
111
112
112
---
Kv
46.5
26.6
XT
53.8
0.672 0.714 0.713 0.742 0.784 0.785 0.783 0.776 0.774 0.774
Fd
---
0.17
0.27
0.35
0.42
0.47
0.50
0.50
0.50
0.50
0.50
---
Cv
32.2
9.99
27.6
44.9
61.0
71.9
78.4
83.1
86.2
87.5
88.4
0.95
23.9
38.8
52.8
62.2
67.8
71.9
74.6
75.7
76.5
---
---
Kv
27.9
8.64
XT
32.2
0.527 0.511 0.652 0.720 0.780 0.820 0.814 0.798 0.790 0.779
---
Cv
68.2
50.8
116
159
185
201
212
219
222
223
223
0.88
100
138
160
174
183
189
192
193
193
---
Kv
59.0
43.9
XT
68.2
0.733 0.653 0.724 0.805 0.809 0.816 0.809 0.812 0.831 0.835
Fd
---
0.18
0.28
0.36
0.42
0.48
0.50
0.50
0.50
0.50
0.50
---
Cv
37.4
13.5
32.3
52.2
66.2
74.4
81.1
85.0
85.8
86.3
86.7
0.85
Kv
32.4
11.7
27.9
45.2
57.3
64.4
70.2
73.5
74.2
74.6
75.0
---
XT
37.4
0.490 0.556 0.609 0.672 0.793 0.772 0.728 0.714 0.711 0.704
---
1. When using Type 655-EZ as a control valve for on-off service, the maximum travel for sizing purposes is 0.75 inch (19 mm).
2. When sizing self-operated regulators, use coefficients listed for 6 mm (0.25 inch) travel.
3. At 100% travel.
4. Restricted trim.
The flow coefficients shown on this page are appropriate for Design EZ-C valves.
20
FL((3))
---
Product Bulletin
51.1:EZ
July 2005
EZ Valve
Table 22. Design EZ, Linear Valve Plug
Linear - Flow Up
Valve
Size,
Inches
1
Port
Diameter
mm Inches
25.4
38.1
1.5
Linear
Characteristic
Maximum
Travel(1)
mm Inches
19
19
0.75
0.75
15
1.5
25 4
25.4
(2)
50.8
(2)
19
29
0.75
1.125
2
25 4
25.4
(2)
76.2
(2)
19
38
0.75
1.5
3
50 8
50.8
(2)
101.6
(2)
29
51
1.125
4
50 8
50.8
(2)
(2)
29
1.125
Flow
Coefficient
10
20
30
40
Cv
2.21
3.87
5.29
Kv
1.91
3.35
4.58
XT
0.638
0.601
Cv
3.99
7.53

50
60
6.56
8.2
5.67
7.09
0.638
0.634
11.1
14.8
FL((1))
70
80
90
100
9.82
11.1
12.1
13.0
13.6
0.96
8.49
9.60
10.5
11.2
11.8
---
0.638
0.629
0.636
0.680
0.769
0.834
---
18.7
22.5
25.8
29.2
31.2
31.9
0.96
---
Kv
3.45
6.51
9.6
12.8
16.2
19.5
22.3
25.3
27.0
27.6
XT
0.633
0.651
0.657
0.691
0.674
0.674
0.696
0.704
0.757
0.818
---
Cv
1.96
3.42
4.94
6.11
7.8
9.3
10.9
13
15.1
16.7
0.96
---
Kv
1.70
2.96
4.27
5.29
6.75
8.04
9.43
11.2
13.1
14.4
XT
0.469
0.578
0.600
0.690
0.652
0.655
0.637
0.625
0.719
0.796
---
Cv
6.08
11.9
18.0
24.1
30.1
36.4
42.8
49.9
52.0
52.4
0.95
---
Kv
5.26
10.3
15.6
20.8
26.0
31.5
37.0
43.2
45.0
45.3
XT
0.560
0.644
0.655
0.675
0.701
0.724
0.779
0.773
0.862
0.924
---
Cv
1.88
3.41
4.95
6.49
8.06
9.67
11.23
12.79
14.35
15.7
0.94
---
Kv
1.63
2.95
4.28
5.61
6.97
8.36
9.71
11.1
12.4
13.6
XT
0.609
0.593
0.597
0.624
0.621
0.626
0.642
0.633
0.750
0.910
---
Cv
15.4
29.6
43.4
58.3
71.8
83.9
93.8
103
108
110.4
0.92
---
Kv
13.3
25.6
37.5
50.4
62.1
72.6
81.1
89.1
93.4
95.5
XT
0.622
0.642
0.692
0.691
0.690
0.721
0.759
0.788
0.839
0.888
---
Cv
6.59
13.3
20.7
28.1
36.0
44.0
55.6
67.5
76.2
80.4
0.94
---
Kv
5.70
11.5
17.9
24.3
31.1
38.1
48.1
58.4
65.9
69.5
XT
0.564
0.500
0.522
0.609
0.577
0.594
0.563
0.582
0.677
0.749
---
Cv
21.3
39.7
57.5
75.8
100
129
157
180
199
209
0.89
---
Kv
18.4
34.3
49.7
65.6
86.5
112
136
156
172
181
XT
0.554
0.628
0.684
0.723
0.665
0.608
0.677
0.826
0.862
0.866
---
Cv
6.16
12.8
20.0
27.8
36.1
45.1
58.8
67.5
78.8
86.8
0.90
Kv
5.33
11.1
17.3
24.0
31.2
39.0
50.9
58.4
68.2
75.1
---
XT
0.740
0.644
0.642
0.619
0.602
0.605
0.552
0.614
0.644
0.736
---
1. At 100% travel.
2. Restricted trim.
Notes: The coefficients shown on this page are also appropriate for Design EZ-C valves.
21
Product Bulletin
51.1:EZ
July 2005
EZ Valve
Table 23. Design EZ, Equal Percentage Valve Plug
Equal Percentage - Flow Up

Valve
Size,
Inches
Port
Diameter
mm Inches
25 4
25.4
38 1
38.1
15
1.5
Maximum
Travel
mm Inches
19
19
0 75
0.75
0 75
0.75
1.5
25 4
25.4
(2)
50 8
50.8
(2)
19
29
0.75
1 125
1.125
2
25 4
25.4
(2)
76 2
76.2
(2)
19
38
0.75
15
1.5
3
50 8
50.8
(2)
101 6
101.6
(2)
29
51
1.125
4
50 8
50.8
(2)
(2)
29
1.125
Flow
Coefficient
Equal Percentage
Characteristic
20
30
40
50
60
70
80
90
100
Cv
0.79
1.25
1.80
2.53
3.63
5.28
7.59
10.7
12.7
13.2
0.96
Kv
0.683
1.08
1.56
2.19
3.14
4.57
6.57
9.26
11.0
11.4
---
XT
0.641
0.634
0.598
0.586
0.584
0.596
0.646
0.680
0.757
0.886
---
Fd
0.091
0.11
0.13
0.16
0.19
0.24
0.30
0.37
0.43
0.50
---
Cv
0.795
1.23
1.91
2.95
4.30
6.46
9.84
16.4
22.2
28.1
0.97
Kv
0.688
1.06
1.65
2.55
3.72
5.59
8.51
14.2
19.2
24.3
---
XT
0.726
0.676
0.733
0.645
0.589
0.558
0.597
0.653
0.777
0.840
---
Fd
0.077
0.086
0.10
0.12
0.15
0.17
0.22
0.27
0.34
0.40
---
Cv
0.770
1.23
1.78
2.58
3.67
5.54
8.30
12.0
15.1
17.3
0.98
---
Kv
0.666
1.06
1.54
2.23
3.17
4.79
7.18
10.4
13.1
15.0
XT
0.654
0.619
0.601
0.605
0.561
0.534
0.518
0.575
0.704
0.861
---
Cv
1.65
2.61
4.30
6.62
11.1
20.7
32.8
44.7
50.0
53.8
0.95
Kv
1.43
2.26
3.72
5.73
9.60
17.9
28.4
38.7
43.3
46.5
---
XT
0.655
0.581
0.520
0.559
0.552
0.529
0.653
0.801
0.903
0.899
---
Fd
0.069
0.085
0.11
0.13
0.18
0.23
0.30
0.37
0.44
0.50
---
Cv
1.02
1.50
2.05
2.78
3.90
5.57
8.16
11.8
14.5
15.9
0.92
---
Kv
0.882
1.30
1.77
2.40
3.37
4.82
7.06
10.2
12.5
13.8
XT
0.596
0.616
0.600
0.580
0.572
0.555
0.523
0.547
0.671
0.905
---
Cv
3.11
5.77
9.12
13.7
21.7
36.0
60.4
86.4
104
114
0.92
Kv
2.69
4.99
7.89
11.9
18.8
31.1
52.2
74.7
90.0
98.6
---
XT
0.619
0.595
0.598
0.619
0.594
0.563
0.586
0.729
0.778
0.781
---
Fd
0.062
0.081
0.10
0.12
0.16
0.20
0.26
0.33
0.40
0.46
---
Cv
2.11
3.11
4.58
6.76
10.7
20.7
34.3
48.3
61.5
71.6
0.92
---
Kv
1.83
2.69
3.96
5.85
9.26
17.9
29.7
41.8
53.2
61.9
XT
0.874
0.699
0.643
0.626
0.587
0.451
0.493
0.587
0.648
0.734
---
Cv
4.90
8.19
13.5
20.1
31.2
52.6
96.7
140
170
190
0.90
Kv
4.24
7.08
11.7
17.4
27.0
45.5
83.6
121
147
164
---
XT
0.594
0.573
0.560
0.568
0.572
0.564
0.532
0.707
0.807
0.834
---
Fd
0.052
0.065
0.080
0.10
0.13
0.17
0.23
0.31
0.38
0.44
---
Cv
1.96
3.05
4.43
6.98
11.9
22.3
36.7
50.9
61.8
72.7
0.92
Kv
1.70
2.64
3.83
6.04
10.3
19.3
31.7
44.0
53.5
62.9
---
XT
0.619
0.575
0.624
0.610
0.678
0.639
0.646
0.673
0.778
0.781
---
1. At 100% travel.
2. Restricted trim.
Notes: The coefficients shown on this page are appropriate for Design EZ-C valves.
22
FL((1))
10
Product Bulletin
51.1:EZ
July 2005
EZ Valve
Table 24. Design EZ, Micro-Form Valve Plug
Micro-Form
Valve
Size,
Inches
All Sizes
0.5
05-2
Port
Diameter
mm Inches
6.4
9.5
0.25
0.375
Equal Percentage
Characteristic
Maximum
Travel
mm Inches
19
19
0.75
0.75
05
0.5
12.7
9.5
0.75
12.7
19.1
9.5
12.7
19.1
9.5
15
1.5
and 2
12.7
19.1
0.5
0.375
0.5
0.75
0.375
0.5
0.75
0.375
0.5
0.75
19
19
19
19
19
19
19
19
19
19
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.75
Flow
Coefficient
10
20
30
40
50
60
70
80
90
100
Cv
0.075
0.088
0.124
0.175
0.236
0.327
0.464
0.641
0.881
1.22
1.52
0.88
Kv
0.065
0.076
0.107
0.151
0.204
0.283
0.401
0.554
0.762
1.06
1.31
---
XT
0.804
0.771
0.717
0.658
0.645
0.620
0.585
0.596
0.596
0.603
0.647
---
Cv
0.102
0.134
0.202
0.313
0.448
0.613
0.879
1.27
1.77
2.47
3.00
0.93
---
FL((1))
Kv
0.088
0.116
0.175
0.271
0.388
0.530
0.760
1.10
1.53
2.14
2.59
XT
0.766
0.711
0.679
0.618
0.602
0.588
0.564
0.580
0.599
0.593
0.723
---
Cv
0.137
0.193
0.324
0.496
0.737
1.07
1.52
2.13
2.93
3.89
4.52
0.94
---
Kv
0.119
0.167
0.280
0.429
0.638
0.926
1.31
1.84
2.53
3.36
3.91
XT
0.739
0.689
0.631
0.595
0.603
0.602
0.592
0.604
0.636
0.687
0.754
---
Cv
0.101
0.131
0.205
0.312
0.446
0.618
0.882
1.28
1.80
2.45
3.03
0.93
---
Kv
0.087
0.113
0.177
0.270
0.386
0.535
0.763
1.11
1.56
2.12
2.62
XT
0.807
0.751
0.642
0.655
0.616
0.597
0.603
0.601
0.607
0.650
0.736
---
Cv
0.133
0.190
0.318
0.486
0.732
1.07
1.52
2.15
3.07
4.20
5.06
0.94
---
Kv
0.115
0.164
0.275
0.420
0.633
0.926
1.31
1.86
2.66
3.63
4.38
XT
0.780
0.720
0.655
0.628
0.606
0.598
0.598
0.596
0.596
0.636
0.722
---
Cv
0.276
0.373
0.617
0.948
1.44
2.14
3.10
4.43
6.14
7.58
8.35
0.87
---
Kv
0.239
0.323
0.534
0.820
1.25
1.85
2.68
3.83
5.31
6.56
7.22
XT
0.734
0.702
0.618
0.634
0.605
0.607
0.646
0.670
0.699
0.730
0.693
---
Cv
0.099
0.129
0.199
0.308
0.448
0.620
0.882
1.29
1.80
2.43
3.07
0.89
---
Kv
0.086
0.112
0.172
0.266
0.388
0.536
0.763
1.12
1.56
2.10
2.66
XT
0.795
0.747
0.663
0.641
0.593
0.569
0.568
0.560
0.571
0.624
0.662
---
Cv
0.133
0.189
0.319
0.492
0.735
1.08
1.53
2.12
2.99
4.17
4.91
0.93
---
Kv
0.115
0.163
0.276
0.426
0.636
0.934
1.32
1.83
2.59
3.61
4.25
XT
0.787
0.728
0.639
0.628
0.591
0.573
0.585
0.600
0.618
0.645
0.803
---
Cv
0.276
0.374
0.622
0.965
1.47
2.17
3.15
4.57
6.52
8.17
8.84
0.97
---
Kv
0.239
0.324
0.538
0.835
1.27
1.88
2.72
3.95
5.64
7.07
7.65
XT
0.723
0.687
0.614
0.588
0.560
0.571
0.596
0.603
0.624
0.750
0.919
---
Cv
0.096
0.121
0.190
0.302
0.435
0.600
0.864
1.26
1.80
2.56
3.20
0.84
---
Kv
0.083
0.105
0.164
0.261
0.376
0.519
0.747
1.09
1.56
2.21
2.77
XT
0.923
0.915
0.763
0.699
0.657
0.640
0.624
0.608
0.596
0.594
0.648
---
Cv
0.145
0.199
0.323
0.503
0.735
1.07
1.54
2.14
3.08
4.36
5.18
0.91
---
Kv
0.125
0.172
0.279
0.435
0.636
0.926
1.33
1.85
2.66
3.77
4.48
XT
0.851
0.748
0.686
0.640
0.617
0.627
0.602
0.607
0.607
0.573
0.705
---
Cv
0.336
0.434
0.683
1.00
1.49
2.21
3.18
4.61
6.73
8.88
10.2
0.92
Kv
0.291
0.375
0.591
0.865
1.29
1.91
2.75
3.99
5.82
7.68
8.82
---
XT
0.784
0.747
0.625
0.636
0.596
0.578
0.603
0.593
0.591
0.680
0.796
---
1. At 100% travel.
Notes: The coefficients on this page are also appropriate for Design EZ-C valves.
23
Product Bulletin
51.1:EZ
July 2005
EZ Valve
Table 25. Design EZ, Micro-Flute Valve Plug
Micro-Flute
Valve
Size,
Inches
Equal Percentage
Characteristic
Port
Diameter
mm
Inches
6.4 1 Flute
All Sizes
0.5 - 2
6.4 3 Flutes
0.25
0
25 1
Flute
0.25
0
25 3
Flutes
Maximum
Flow
Travel
Coeffimm Inches cient
19
19
0.75
0.75

10
20
30
40
50
60
70
80
90
100
FL((1))
Cv
0.0385 0.0455 0.0560 0.0719 0.0942 0.124
0.162
0.212
0.278
0.354
0.87
Kv
0.033
0.039
0.048
0.062
0.081
0.107
0.140
0.183
0.240
0.306
---
XT
0.778
0.734
0.690
0.653
0.642
0.635
0.637
0.634
0.632
0.656
---
Cv
0.0562 0.0725 0.101
0.146
0.216
0.312
0.433
0.588
0.802
1.07
0.90
Kv
0.049
0.063
0.087
0.126
0.187
0.270
0.375
0.509
0.694
0.926
---
XT
0.692
0.648
0.639
0.625
0.600
0.586
0.597
0.613
0.620
0.624
---
1. At 100% travel.
Table 26. Design EZ, Micro-Flow Valve Plug
Micro-Flow
Valve
Size,
Inches
Port
Diameter
mm
Inches
Equal Percentage
Characteristic
Angle
A
of
Inches Flat
Maximum
Travel
mm
155
1
55
All Sizes
0.5 - 2
48
4.8
0 1875
0.1875
19
0 75
0.75
325
3
25
1. At 100% travel.
24
Flow
Coefficient
10
20
30
40
50
60
70
80
90
100
Cv
0.015
0.020
0.024
0.028
0.034
0.041
0.048
0.056
0.066
0.075
0.89
Kv
0.013
0.017
0.021
0.024
0.029
0.035
0.042
0.048
0.057
0.065
---
XT
0.964
0.888
0.906
0.947
0.942
0.928
0.949
0.947
0.918
0.934
---
Cv
0.016
0.026
0.038
0.052
0.070
0.088
0.107
0.127
0.153
0.181
0.84
Kv
0.014
0.022
0.033
0.045
0.061
0.076
0.093
0.110
0.132
0.157
---
XT
0.707
0.697
0.687
0.700
0.675
0.679
0.680
0.680
0.681
0.681
---
FL((1))
Product Bulletin
51.1:EZ
July 2005
EZ Valve
Specifications
limited as shown in tables 8, 9, and 11. For soft
seats on NACE service, see figure 6.
Valve Sizes
0.5, 0.75, 1, 1.5, 2, 3, and
4-inch
Shutoff Classification Per ANSI/FCI 70-2

and IEC 60534-4
Metal Seating: Class IV is standard. Class V is
optional.
PTFE Composition Seating: Class VI
End Connection Styles(1, 2)

Cast Iron Valves.
Flanged: 1 through 4-inch, Class 125 flat-face
or 250 raised-face flanges per ASME B16.1
Screwed: 0.5 through 2-inch, consistent with
ASME B16.4
Steel and Stainless Steel Valves.
Flanged: Class 150, 300, or 600 raised-face
(RF) or ring-type joint (RTJ) flanges per
ASME B16.5
Screwed or Socket Welding: 0.5 through 2-inch,
consistent with ASME B16.11
Buttwelding (schedule 40 or 80): 1 through 4-inch,
consistent with ASME B16.25
Maximum Inlet Pressure and Temperatures(1, 2)

As listed below, unless limited by maximum
pressure drop or material temperature capabilities
Cast Iron Valves.
Flanged: Consistent with Class 125B or 250B
pressure-temperature ratings per ASME B16.1
Screwed: Consistent with Class 250 per ASME
B16.4
Steel and Stainless Steel Valves.
Flanged: Consistent with Class 150, 300, and
600(3) per ASME B16.34
Screwed or Welding: Consistent with Class 600(3)
per ASME B16.34
Maximum Pressure Drops(2)

Same as maximum inlet pressure for specific
construction defined above, except where further
Construction Materials
Body and Bonnet: Cast iron, WCC steel,
CF8M (316 stainless steel), WC9 chrome
moly steel, or other materials upon request
Trim Materials: See tables 3, 4, 5, and 15.
All Other Parts: See tables 6 and 10
Material Temperature Capabilities(2)
Body-Trim Combinations: See table 7.
Bolting for NACE MR0175-2002: See table 17.
All Other Parts: See tables 6 and 10
Flow Characteristics
Equal percentage, quick opening, and
linear. With soft seat, equal percentage is
standard
Flow Direction
Up through the seat ring
Flow Coefficients and Noise Level Predictions
See table 14 and Catalog 12
Port Diameters and Valve Plug Travels
See table 15
Yoke Boss and Stem Diameters
See table 15
Typical Bonnet Styles
Plain or extension. See figure 8 for standard
dimensions
ENVIRO-SEAL bellows seal bonnet. See figure
3. Also, see Bulletin 59.1:070, ENVIRO-SEAL
Bellows Seal Bonnets, for more information.
- continued -
25
Product Bulletin
51.1:EZ
July 2005
EZ Valve
Specifications (continued)
1 inch valve: 11 kg (25 lb)

1.5 inch valve: 18 kg (40 lb)
Packing Arrangements
Standard Material: Single PTFE V-ring
Optional Materials: See table 6.
ENVIRO-SEAL Packing Systems: See figure 4.
ENVIRO-SEAL Packing Systems in vacuum
service: Standard ENVIRO-SEAL packing
systems can be used in vacuum service with
packing rings in standard orientation. Do not
reverse the ENVIRO-SEAL PTFE packing rings.
Also, see Bulletin 59.1:061, ENVIRO-SEAL
Packing Systems for Sliding-Stem Valves, for
more information.
Valve Dimensions
See figure 8. ENVIRO-SEAL bellows seal
bonnet dimensions, figure 7
Additional Options
Approximate Weights
0.5 inch, 0.75 inch valves: 9 kg (20 lb)
Lubricator or lubricator/isolating valve for

packing lubrication and valve body drain plug
1. DIN (or other) ratings and end connections can usually be supplied; consult your Fisher sales office.
2. Do not exceed the pressure/temperature limits in this bulletin. Any applicable standard or code limitations should not be exceeded.
3. For temperatures above 427C (800F), the Class 600 CF8M (316 stainless steel) valve body must be derated; contact your Fisher sales office for further information. Flanged valves derated
at 38C (100F) do not comply with ASME B16.34.
ENVIRO-SEAL Packing System Specifications

Applicable Stem Diameters
For Design E Valves.
9.5 mm (3/8 inches), 12.7 (1/2), 19.1 (3/4),
25.4 (1), and 31.8 (1-1/4) diameter valve
stems
Maximum Pressure/Temperature Limits(1)
To Meet the EPA Fugitive Emission Standard
of 500 PPM(2).
For ENVIRO-SEAL PTFE and ENVIRO-SEAL
Duplex packing systems: full Class 300 up to
232C (450F)
For ENVIRO-SEAL Graphite ULF packing: 104
bar (1500 psig) at 316C (600F)
Construction Materials
PTFE Packing Systems.
Packing Ring and Lower Wiper: PTFE V-ring(3).

Male and Female Adaptor Rings: Carbon-filled
PTFE V-ring
Graphite ULF Packing Systems: Graphite rings
Anti-Extrusion Washer: Filled PTFE (not
required for Graphite ULF packing)
Lantern Ring: S31600 (316 stainless steel) (not
required for Graphite ULF packing)
Design E Valves.
Packing Box Flange: S31600
Spring: 17-7PH stainless steel or Inconel
Packing Follower: S31600 lined with carbon-filled
PTFE
Packing Box Studs: Strain-hardened 316
stainless steel
Packing Box Nuts: 316 stainless steel SA194
Grade 8M
1. Refer to the valve specifications in this bulletin for pressure/temperature limits of valve parts. Do not exceed the pressure/temperature rating of the valve. Do not exceed any applicable code
or standard limitation.
2. The Environmental Protection Agency (EPA) has set a limit of 500 parts per million (ppm) for fugitive emissions from a valve in selected VOC (Volatile Organic Compound) services.
3. In vacuum service, it is not necessary to reverse the ENVIRO-SEAL PTFE packing rings.
Note
Neither Emerson, Emerson Process
Management, Fisher, nor any of their
affiliated entities assumes
responsibility for the selection, use
and maintenance of any product.
Responsibility for the selection, use,
and maintenance of any product
remains with the purchaser and
end-user.
26
Product Bulletin
51.1:EZ
July 2005
EZ Valve
27
Product Bulletin
51.1:EZ
July 2005
EZ Valve
ENVIRO-SEAL, HIGH-SEAL, easy-e, Micro-Flow, Micro-Flute, Micro-Form, and Fisher are marks owned by Fisher Controls International LLC, a
member of the Emerson Process Management business division of Emerson Electric Co. Emerson and the Emerson logo are trademarks and service marks of Emerson Electric Co. All other marks are the property of their respective owners. This product may be covered by one or more of the
following patents: 5,129,625; 5,131,666; 5,056,757; 5,230,498; and 5,299,812 or under pending patents.
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are
not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability.
We reserve the right to modify or improve the designs or specifications of such products at any time without notice.
Neither Emerson, Emerson Process Management, Fisher, nor any of their affiliated entities assumes responsibility for the selection, use and
maintenance of any product. Responsibility for the selection, use and maintenance of any product remains with the purchaser and end-user.
Emerson Process Management

Fisher
Marshalltown, Iowa 50158 USA
Cernay 68700 France
Sao Paulo 05424 Brazil
Singapore 128461
www.Fisher.com
28
Fisher
Controls International LLC 1979, 2005; All Rights Reserved
Printed in USA

Fisher Valve Ez

Uploaded by

Copyright:

Available Formats

Fisher Valve Ez

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Fisher Valve Ez

Uploaded by

Copyright:

Available Formats

Product Bulletin

Design EZ Sliding-Stem Control Valve

The easy-e Valve Family

Interchangeable, restricted-capacity trims and

Figure 1. Design EZ Valve with Type 657 Actuator

Optional constructions provide material

Class VI Trim Materials . . . . . . . . . . . . . . . . 6

Performance+ Seat RingFlow-straightening,

Neither Emerson, Emerson Process

Figure 2. Design EZ Sectional

Compliance with European Standards

easily install in your existing valves or can be

For applications requiring compliance with

ENVIRO-SEAL packing systems, available with

ENVIRO-SEAL, HIGH-SEAL Features

Figure 3. Design EZ Valve with ENVIRO-SEAL Bellows

Adaptable to Many Applications

TYPICAL ENVIRO-SEAL PACKING SYSTEM

TYPICAL ENVIRO-SEAL PACKING SYSTEM

TYPICAL HIGH-SEAL PACKING SYSTEM

TYPICAL ENVIROSEAL PACKING SYS

Figure 4. ENVIRO-SEAL and HIGH-SEAL Packing Systems

Port Size, Inches

Minimum Seat Load

300 lbs/lineal inch

Table 2. Class VI Trim Materials

S31600 (316 SST)

TRIM TEMPERATURE LIMIT

Not a limiting factor

Not a limiting factor

Not a limiting factor

Not a limiting factor

ALLOWABLE PRESSURE DROP, BAR

ALLOWABLE PRESSURE DROP, PSI

Micro-Flute Valve Plugs for Minimum

mm (3/8 inch) actuator-stem connection, and 6.4

Table 3. Material Cross Reference

17-4 PH Stainless Steel

PTFE SEATING WITH

Figure 6. Typical PTFE Seat Trim

Class VI Shutoff Capabilities

Disk Seat and

Disk Seat and

Table 6. Construction Materials and Temperature Limits

Cast iron valve body

CF8M (316 stainless

Seat disk (optional)

PTFE-coated N04400 (Monel) (optional for trim 120)

N04400/composition (standard for trims 120 & 153)

N04400/PTFE (optional for trims 120 & 153)

N06600 (Inconel)/graphite (FGM) standard

Steel SAE Grade 5

Steel SA-194-2H (lubricated)

Steel SA-193-B7 (standard)

Steel SA-194-2H (standard)

304 stainless steel SA-320-B8

304 stainless steel SA-194-8

316 stainless steel SA-193-B8M (strain hardened)