Colour Code According To DIN VDE 0293: 1) Multicore Flexible Cables

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Colour code according to DIN VDE 02931)

Multicore flexible cables


Number of cores 2 3 4 5 6 and more Cores with green-yellow protective conductor green-yellow/brown/blue green-yellow/black/blue/brown green-yellow/black/blue/brown/black green-yellow/others black with white numbering (J) Cores without green-yellow protective conductor brown/blue black/blue/brown black/blue/brown/black black/blue/brown/black/black black with white numbering (O)

Multicore cables for fixed installation


Number of cores 2 3 4 5 6 und mehr Cores with green-yellow protective conductor green-yellow/black* green-yellow/black/blue green-yellow/black/blue/brown green-yellow/black/blue/brown/black green-yellow/others black with white numbering (J) Cores without green-yellow protective conductor black/blue black/blue/brown black/blue/brown/black black/blue/brown/black/black black with white numbering (O)

* This type is according to DIN VDE 0100 part 540, table 2 valid only for copper cross-section of 10 mm2 and more or Alu 16 mm2.

Multicore cables with concentric conductor for fixed installation


Number of cores 2 3 4 5 6 and more Core markings black/blue black/blue/brown black/blue/brown/black black with white numbering* black with white numbering**

Single core cables


The core-colour of single core sheathed cables is black or green-yellow.

* This type contains altogether 6 conductors, see DIN VDE 0293 section 5,1 ** see DIN VDE 0293 section 5,1

Core marking with numbering (in direction to longitudinal axis)


Height and gap of numbers Core-nominal-1 mm D # 2,4 2,4 < D # 5,0 5,0 < D e*) mm $ 0,6 $ 1,2 $ 1,6 h mm $ 2,3 $ 3,2 $ 4,6 i mm ca. 2 ca. 3 ca. 4 d mm # 50 # 50 # 50
e: breadth of number h: height of number i : gap between two successive numbers and between number and dash d: gap between two successive numbers

*) when the number is only 1, the smallest breadth is half of the given dimension to this column.
1 ) Please Request: Identification of cable cores/connections and flexible connections in colour according to: DIN VDE 0293-308, HD 308 S2 (to be changed 01.04.2006). In comparison with DIN VDE 0293 (VDE 0293):1990-01 the following changes occurred: * Separation of the requirements for core identification into the different standards, that is: By colour as in the standards, By imprinting according to DIN EN 50334 (VDE 0293 Part 334); * Use of the same colour code for fixed and flexible connections; * Core colour gray to be used instead of black in multicore cables, which previously contained two black cores; * For neutral connections, only single cable, connections with a blue core may be used.

T 44

You might also like