Hot Water

No matter where you live, a solar system can reduce energy costs and provide a reliable supply of domestic hot water BY SCOTT GIBSON

Solar

heres nothing like a looming energy crisis to bring history full circle. More than a century has passed since Clarence Kemp, a Baltimore heating-equipment dealer, came up with the first commercial solar water heater. His patented Climax Solar Water Heater, which sold for $25, was a hit. More-efficient designs soon came along, and by 1941, half the houses in Florida had solar hot-water systems. Roof-mounted solar collectors were common in California, too. But natural-gas discoveries in the West and a utility blitzkrieg to sell more electricity in Florida brought the solar hot-water business to its knees. Does the story sound familiar? It should. A spike in energy prices and short-lived government incentives created a solar hotwater boomlet in the 1970s and 80s. The interest withered when energy prices dropped and government subsidies dried up, sticking homeowners with systems that didnt always work and couldnt be serviced for lack of qualified technicians. Rising energy prices are once again making solar attractive. But this time around, the industry is offering more-dependable, better-designed hot-water systems that give homeowners in all parts of the country a reliable way to cut energy bills.
76

Heating water with the sun can be pretty simple. In the right climate, a 55-gal. drum painted black and perched on the roof provides plenty of hot water. Collectors like that, called batch heaters, are producing hot water all over the world. But technology has a lot more to offer these days, making solar hot water feasible for any region of the country and for just about any application, from swimming pools and hot tubs to domestic hot water and even space heating.
There are many ways to heat water, but keeping it hot is another story

Although solar hot-water systems vary widely in design and complexity, they share some basics. The sun heats water, or another liquid capable of transferring heat, in a collector. Specialized materials called selective coatings are made to absorb available solar radiation. They include black chrome, black nickel, and aluminum oxide combined with nickel or titanium nitride oxide. Once water is hot, its moved either to a storage tank or is piped directly to where its needed. That much seems simple, but the trick is making sure the water doesnt cool down too much or, worse, freeze. To cover the wide range of temperatures and solar potential that hotDrawings: Toby Welles/WowHouse.net. Photo this page: Courtesy of Viessmann Manufacturing Co. Inc.

FINE HOMEBUILDING

Hot water to storage tank

ICS (batch) collector

Unobtrusive, efficient, and energy-smart. Heating water with the sun can be almost as simple as installing the collector on the roof. Resembling skylights, the collectors can provide hot water for baths, laundry, and even heat.

PA S S I V E S Y S T E M S ARE AN AFFORDABLE OPTION FOR WARM C L I M AT E S

In their simplest form, these systems consist of a batch collector (also known as integrated collector storage, or ICS) thats pressurized by the household-water supply and is exposed to the sun. When a hot-water tap is opened, water is forced from the batch collector to a conventional water heater or directly into the distribution system. Relatively easy to install, these systems are suitable only for warm-weather areas. Solar Direct (www.solardirect.com) sells a passive-system kit for about $1400.

Cold water in

water systems can encounter, manufacturers offer a variety of equipment and plumbing options. In general, systems are either active or passive, meaning they operate with or without electric pumps. They also can be direct or indirect (sometimes called open loop or closed loop), which means the collectors heat the water thats used in the house or, alternatively, heat a nonfreezing transfer medium that in turn heats potable water in a heat exchanger. In virtually all cases, solar-heated water is routed through a conventional water heater, where it gets a temperature boost before being distributed to its point of use.
How much hot water do you need?

Hot water to fixtures

Most Americans use about 20 gal. of hot water a day, a standard industry benchmark. Most hot-water tanks are sized for a single days consumption, so an average family of four, for example, might end up with an 80-gal. tank. Solar hot-water systems should have no trouble delivering that kind of volume, but there arent any safe generalizations about whether it will be enough to satisfy household demands. The thing with hot water is that there are wide variations in demand, says Brad Collins, executive director of the American Solar
www.finehomebuilding.com

Hot-water storage tank/water heater

APRIL/MAY 2008

77

Tank Heated water to storage tank

Cold return from tank

PA S S I V E THERMOSIPHONS R E LY O N CONVECTION
Hot water to fixtures More-advanced passive systems employ a method of heat exchange called thermosiphoning. Water heated in the collector rises into the rooftop tank, displacing cold water that is returned to the bottom of the collector for heating. When a hot-water tap is turned on, water flows from the collectors tank to the conventional water heater or into water-distribution lines. Solahart (www.solahart .com) offers an insulated model that can be used in freeze-prone areas; its priced around $3600 for an 80-gal. setup, not including the storage tank, shipping, or installation.

Collector

Cold water in

Hot-water storage tank/water heater

They work on the ground, too. As long as the solar exposure is good, its often easier and less expensive to install large collectors on the ground.

Energy Society. A 3000-sq.-ft. house occupied by two elderly people will have substantially less demand than the exact same house next door that has five people, including two teenage girls. Their demand is tenfold what it is in the other house. Other variables include when demand for hot water is highest, whether use comes all at once (morning showers, for example) or is distributed over the day, how many appliances are in the house and when they are used, and how much solar potential the house has. Its a different environment for each and every house, says Collins. Its very much occupant-driven. If theres such a thing as an average, the Arizona Solar Center estimates that a solar hot-water system should be able to deliver 100% of hot water in the summer and about 40% on a year-round basis. Performance varies by region. A household of four people would need 40 sq. ft. of collectors for an 80-gal. tank in Arizona, 55 sq. ft. in South Carolina, and 106 sq. ft. in Vermont. How this translates into savings on gas or electric bills is also a wild card. Most solar hot-water systems are used to heat water before it goes into a conventional water heater, not as an outright replacement for a water heater fueled by gas or electricity. Careful consumers who are flexible about when they use hot water will see more solar benefit than a family that wants a lot of hot water all at once. Under the right circumstances, virtually all of a households hot-water needs can be met by a solar system. But thats no guarantee. Its like buying a Toyota Prius, says Collins, likening an investment in solar hot water to owning one of Toyotas hybrid cars. You change the way you drive because its rewarding. You see how your involvement can impact your miles per gallon. In the same way, your involvement can impact how much energy youre going to be charged for, whether its thermal or electrical energy. People become energy literate and smart energy consumers.
Using solar for space-heating

Solar collectors are commonly used for domestic hot water, but they also can supplement both forced-air and hydronic-heating systems. In Europe, says Tim Merrigan of the National Renewable Energy Laboratory in Boulder, Colo., package systems that do both are relatively common. But due to heavy winter-heating loads and reduced solar
Photo this page: Courtesy of Rheem Manufacturing Co.

78

FINE HOMEBUILDING

How much will my

system cost?
much as $3690, my annual utility savings would be from $224 to $335, and I would remove 21 tons of greenhouse gases from the air. Thats the equivalent of 42,000 auto miles. Years to break even? Between three and four, not including the systems impact on property-value appreciation. If I wanted estimates, a link would take me to a list of local installers, complete with contact information, services offered, and a brief summary of their experience.

potential, homeowners in this country shouldnt expect to get much more than ost is a key consideration when one-third of their winter heat from solar weighing the merits of renewable sources with todays technology. energy, not only because the systems tend Elia Kleiman, the president of Synto be expensive but also because they epex Energy in Cambridge, Mass., says force us to think about energy in an enthe proportion of winter heat from solar tirely different way. A conventional water depends on the type of heating system, heater doesnt cost much, but its expenthe amount of insulation installed, and sive to operate over its lifetime. A solar the tightness of the house. A best-case hot-water system is much more expensive scenario in New England, land of snowy up front but costs less to use. winters and cold, dreary springs, is that Thinking in generalities isnt helpful when a solar system meets 40% to 70% of the it comes to deciding whether solar hot heating load. Thats in a well-sealed house water is a reasonable investment. For spewith a radiant-floor heating system. cifics, I went to www.findsolar.com, a Web Radiant-floor heating is especially well site run under the auspices of the Departsuited to solar hot-water systems because ment of Energy, the American Solar it requires lower water temperatures, Energy Society, and the Solar Electric 120F versus the 180F that would be Power Association. Its an excellent place pumped through a typical baseboard to get started on a hot-water system and hydronic system. Solar hot water also provides a variety of other useful links. can be used for newer forced-air systems A worksheet let me plug in a lot of spethat use a technology called hydro air. cifics: my state, county, electric utility, These boilers heat water forced through and the number of people living in the a heat-transfer coil, where it warms outhouse. In just a few seconds, the site came going air. (For more info, see Downsizup with the size of the system Id need, ing for Comfort, FHB #187, and online length of payback, annual utility savings, at FineHomebuilding.com.) and even return on investment. For a hypothetical house of roughly 2500 sq. ft.well insulated and well 1. In southern Maine, Id need one colsealedKleiman says Synepex would lector of about 32 sq. ft. to produce the probably recommend eight evacuated35 gal. of hot water my wife and I would tube collectors covering roughly 400 sq. ft. use in a day. Having the system installed of roof. That would provide 100% of would cost about $3500, but after a state domestic hot water in addition to what rebate and the federal tax credit, the net it supplied to the space-heating side. cost would be less than half that. MoreSystems like that arent cheap. over, my property value Although its difficult to offer meaningwould increase by as ful numbers without knowing specifics, Kleiman says that a solar-radiant floor system could easily cost $16,000 and possibly as much as $24,000 before tax credits and rebates. Thats many times more than a system designed for only domestic hot water. If the collectors were tied to a baseboard hot-water system rather than radiant floor, a homeowner might expect to see solar take care of only 20% to 40% of the heating load. A big drawback with trying to heat the house with solar hot water is that demand is highest when the heat potential of the system is lowest. On an overcast day in northern New England, the sun is long gone by late afternoon, and the call for heat goes up accordingly. The answer

2. In Tucson, Ariz., where utility rates are lower, a similarly sized system would produce between $252 and $378 in annual utility savings. 3. In Pensacola, Fla., lower state incentives and utility rates drive the savings down to a range between $74 and $110. 4. In Dayton, Ohio, the savings are about the same as in Pensacola (about $85 per year).
If electricity rates increase more in the future than now forecast, solar hot water will become a viable option for more people. Until then, when it comes to saving money with solar hot water, it seems that if you have high utility rates, youd be smart to get a system on your roof. If not, the decision depends on your commitment to a cleaner environment.

kwh/m/day kilowatt hours per square meter per day

4-4.5 4.5-5 5-5.5 5.5-6 6-6.5 6.5-7

Map indicates an annual average of daily solarradiation potential for a south-facing flat collector array, mounted at an angle equal to its latitude. Data courtesy of National Renewable Energy Laboratory.

www.finehomebuilding.com

APRIL/MAY 2008

79

Hot water to tank

Photovoltaic panel powers pump; grid current can also be used.

A C T I V E S Y S T E M S R E D U C E H E AT L O S S
In active systems, electric pumps speed circulation to reduce Hot water to heat loss. As illustrated fixtures here, water is run through flat-plate collectors (essentially heat collectors plumbed with a network of copper pipe) to the water heater. In areas subject to occasional freezing, water is drained into a secondary storage tank when the water temperature drops below a certain point. The Alternative Energy Store (http:// home.altenergystore.com) sells a basic open-loop kit consisting of three flat-plate collectors, hardware, and pump for about $3600. The storage tank, shipping, and installation are not included. Cold water in

Flat-plate collector

DC pump

Cooler water settles at bottom of tank and circulates to collector.

Hot-water storage tank/water heater

INDIRECT SYSTEMS ARE MOST EFFICIENT AND MOST EXPENSIVE

Temperature sensor Photovoltaic panel powers pump.

Heated glycol to heat exchanger Evacuated-tube collectors

In these active systems, a pump circulates glycol in a closed loop. After running through high-efficiency evacuated-tube collectors (or flat-plate collectors), the hot glycol returns to the storage tank, where a heat exchanger warms potable hot water. Essentially freezeproof, these glycolcharged systems are able to perform in any season. Energyworks LLC in Portland, Maine, put the price of an installed system adequate for a local family of four at about $10,000.

Hot water to tap

Cold water in Cooled glycol to collectors

Hot-water storage tank/ water heater Temperature sensor

Controller DC pump Heat exchanger Expansion tank

80

FINE HOMEBUILDING

Photos this page: Courtesy of Solarwrights Inc.

Collector installation at a glance

1
Solar hot-water systems involve a fair amount of labor-intensive planning and plumbing, but a typical collector installation is fairly straightforward. On this membrane-covered shed roof, 1 the first step was to erect the aluminum frames

4
clipped onto each pair of frames. 3 Simple compression fittings connect the panels to plumbing. 4 The installers added two more panels and finished in about half a day. They spent another two days setting up the system.

that hold the panels. The frames are adjusted to a fixed angle that maximizes the collectors solar gain and are bolted to blocking that has been integrated into the roof. 2 The panels, which weigh about 100 lb. each, are carried up and

is to store hot water generated during the day in storage tanks so that it can be used for heat when the sun goes down or when the days are cloudy. Tanks can be very large, 2000 gal. or more, although Kleiman says newer systems can use much-smaller tanks, as little as 200 gal. Researchers also are looking down the road at promising new possibilities. Merrigan, for example, describes one experimental project in Canada where solar collectors are used to heat the ground when solar potential is abundant in summer. In winter, geothermal heat pumps can be used to extract the stored heat. This seasonal storage of heat is one idea that could make 100% solar heat possible in the futureeven in Calgary, Alberta.
Rebates and tax breaks could be the keys to the future

What takes the sting out of the high cost of buying into renewableenergy systems is a combination of federal tax credits and state and utility rebates. The federal credit, now pegged at 30% of system cost up to a maximum credit of $2000, is open to everyone. State and utility rebates, however, vary. Where they are generous, such as in California or Hawaii, you can expect robust growth for the solar industry. The federal credit is now scheduled to end in 2008. Although pending legislation would extend the program, the on-and-off nature of

government support is a travesty, says Collins, and a chronic problem for the solar industry. You cant do this with stops and starts, he adds. Its been the history of incentives for renewables for the past 25 years. Merrigan says that as many as 35% of all houses in Hawaii have solar water-heating systems, in part because of generous rebates. I think its key, he says. Its just like for photovoltaics. PV is growing where there are incentives. The first cost of the system can be enough to make people think about it, but to not want to make that investment. If you have incentives that can bring down that first cost, you see good market penetration. Still, credits and incentives are available now, and they make a much-bigger difference proportionally for hot water than for photovoltaic systems. You displace roughly 2 kw of energy with your water system, so its like putting a 2-kw PV system on your roof, says Collins. But its hot water. A 2-kw system of PV might be $20,000, but a 2-kw solar hot-water system might be $6000. Ive often said that solar hot water is the most misunderstood bargain out there.
Contributing editor Scott Gibson lives in East Waterboro, Maine. Photos by Charles Bickford, except where noted.

RESOURCES FOR SOLAR INFO

Alternative Energy Store
http://home.altenergystore.com
Solar information and products.

Florida Solar Energy Center

www.fsec.ucf.edu
Comprehensive site on all things solar, including efficiency ratings of collectors and systems by manufacturer.

Solar Direct

www.solardirect.com
Solar information and resources.

American Solar Energy Society

www.ases.org
Links, background information on solar energy.

Interstate Renewable Energy Council

www.irecusa.org
Includes a state-by-state listing of energy incentives.

www.solar-rating.org

Solar Rating and Certification Corp.

Ratings for solar collectors and systems by manufacturer.

Find Solar

www.findsolar.com
Worksheets for estimating costs of solar hot-water systems.

National Renewable Energy Laboratory

www.nrel.gov
Lots of background information on renewable energy.

www.finehomebuilding.com

APRIL/MAY 2008

81