Scribd Logo
Upload

Welcome to Scribd!

  • 243 views

    Control Valve Press Drop Calculation

    Uploaded by

    Antony Abirawa
    1. The documents provide calculations for control valve instrumentation datasheets for various fluids including Na2CO3 15%, BRC, and H2SO4 98%. 2. Key parameters are calculated for minimum, normal, and maximum flow rates including Reynolds number, friction factor, pressure drops, and resulting outlet pressures. 3. Upstream and downstream conditions are considered including fluid properties, pipe dimensions, velocities, and head losses to determine the operational parameters of control valves.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLSX, PDF, TXT or read online from Scribd

    Control Valve Press Drop Calculation

    Uploaded by

    Antony Abirawa
    243 views3 pages
    1. The documents provide calculations for control valve instrumentation datasheets for various fluids including Na2CO3 15%, BRC, and H2SO4 98%. 2. Key parameters are calculated for minimum, normal, and maximum flow rates including Reynolds number, friction factor, pressure drops, and resulting outlet pressures. 3. Upstream and downstream conditions are considered including fluid properties, pipe dimensions, velocities, and head losses to determine the operational parameters of control valves.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. The documents provide calculations for control valve instrumentation datasheets for various fluids including Na2CO3 15%, BRC, and H2SO4 98%. 2. Key parameters are calculated for minimum, normal, and maximum flow rates including Reynolds number, friction factor, pressure drops, and resulting outlet pressures. 3. Upstream and downstream conditions are considered including fluid properties, pipe dimensions, velocities, and head losses to determine the operational parameters of control valves.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    243 views3 pages

    Control Valve Press Drop Calculation

    Uploaded by

    Antony Abirawa
    1. The documents provide calculations for control valve instrumentation datasheets for various fluids including Na2CO3 15%, BRC, and H2SO4 98%. 2. Key parameters are calculated for minimum, normal, and maximum flow rates including Reynolds number, friction factor, pressure drops, and resulting outlet pressures. 3. Upstream and downstream conditions are considered including fluid properties, pipe dimensions, velocities, and head losses to determine the operational parameters of control valves.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 3

    Control Valve Instrument Datasheet Calculation

    FV-A1002
    Operating condition

    Upstream condition

    1. Fluid Name
    2. Temp. Min/Nor/Max
    3. Sp.Gr. Min/Nor/Max
    4. Vap. Press. Max
    5. Vis. Min/Nor/Max
    6. Capacity Nor.
    7. Capacity Overdesign
    8. Capacity Design
    Upstream condition
    1. Case :
    2. Capacity Des.
    3. Sp. Gr.
    4. Viscosity
    5. Line Size/Class
    6. Pipe Inside Diam.
    7. Actual Length
    8. Equivalent Length
    9. Velocity
    10. Reynolds Number
    a. Rough. Value (e)
    b. e/D
    c. Frict. Factor
    11. Straight Line Loss
    12. Elevation
    13. Total loss, Upstream

    Na2CO3 15%

    30
    1.150
    0.0760
    2.3

    (oC)
    (kg/cm2A)
    (cP)
    (m3/hr)
    (%)
    (m3/hr)

    (cP)
    (inch/SN)
    (mm)
    (m)
    (m)
    (m/s)
    (inch)

    4.0
    MinFlow

    Destination
    (m3/hr)

    1. Case :

    [suction capacity]
    Norm Flow

    Max Flow

    FV-A1002

    0.3

    0.8

    1.2

    1.150
    2.3

    1.150
    2.3

    1.150
    2.3

    1.5

    1.5

    1.5

    38.1

    38.1

    38.1

    285

    285

    285

    427.5
    0.08
    1.43E+03

    427.5
    0.19
    3.56E+03

    427.5
    0.28
    5.37E+03

    2. Capacity Des.
    3. Sp. Gr.
    4. Viscosity
    5. Line Size/Class
    6. Pipe Inside Diam.
    7. Actual Length
    8. Equivalent Length
    9. Velocity
    10. Reynolds Number
    a. Rough. Value (e)
    b. e/D
    c. Frict. Factor
    11. Straight Line Loss
    12. Elevation
    13. Total loss, downstream

    6.00E-05
    4.00E-05

    6.00E-05
    4.00E-05

    2. Flowrate
    3. Pump head @ rated flow

    Basius Eq

    0.01445

    0.01054

    0.00929

    Churcill Eq

    0.01284

    0.01023

    0.00923

    0.022
    0
    0.02

    0.098
    0
    0.10

    0.195
    0
    0.19

    (m3/hr)
    (cP)
    (inch/SN)
    (mm)
    (m)
    (m)
    (m/s)
    (inch)
    Basius Eq
    Churcill Eq
    (kg/cm2)
    (m)

    Summary
    1. Case

    6.00E-05
    4.00E-05

    (kg/cm2)
    (m)
    kg/cm2G

    MinFlow

    Destination

    m3/hr

    Norm Flow

    Max Flow

    VE-A104

    0.3

    0.8

    1.2

    1.150
    2.3

    1.150
    2.3

    1.150
    2.3

    1.5

    1.5

    1.5

    38.1

    38.1

    38.1

    30

    30

    30

    36
    0.08
    1.43E+03
    6.00E-05
    4.00E-05
    0.01445
    0.01284
    0.002
    13
    1.50

    36
    0.19
    3.56E+03
    6.00E-05
    4.00E-05
    0.01054
    0.01023
    0.008
    13
    1.50

    36
    0.28
    5.37E+03
    6.00E-05
    4.00E-05
    0.00929
    0.00923
    0.016
    13
    1.51

    Min flow

    Normal flow

    Max flow

    0.3
    38

    0.8
    38

    1.2
    38

    4. Inlet pressure

    m
    kg/cm2G

    4.34

    4.27

    4.17

    5. Total Pressure drop

    kg/cm2

    2.85

    2.77

    2.66

    6. Outlet pressure

    kg/cm2G

    1.50

    1.50

    1.51

    Control Valve Instrument Datasheet Calculation


    FV-A1001
    Operating condition
    1. Fluid Name
    2. Temp. Min/Nor/Max
    3. Sp.Gr. Min/Nor/Max
    4. Vap. Press. Max
    5. Vis. Min/Nor/Max
    6. Capacity Nor.
    7. Capacity Overdesign
    8. Capacity Design
    Upstream condition
    1. Case :
    2. Capacity Des.
    3. Sp. Gr.
    4. Viscosity
    5. Line Size/Class
    6. Pipe Inside Diam.
    7. Actual Length
    8. Equivalent Length
    9. Velocity
    10. Reynolds Number
    a. Rough. Value (e)
    b. e/D
    c. Frict. Factor

    BRC

    (kg/cm2A)
    (cP)
    (m3/hr)
    (%)
    (m3/hr)

    Destination
    (m3/hr)
    (cP)
    (inch/SN)
    (mm)
    (m)
    (m)
    (m/s)
    (inch)
    Basius Eq
    (kg/cm2)
    (m)
    kg/cm2G

    350

    350.0
    MinFlow

    Churcill Eq
    11. Straight Line Loss
    12. Elevation
    13. Total loss, Upstream

    65
    1.179
    0.1990
    0.9

    (oC)

    [suction capacity]
    Norm Flow

    Max Flow

    FV-A1001

    56.0

    141.0

    169.5

    1.179
    0.9

    1.179
    0.9

    1.179
    0.9

    203.2

    203.2

    203.2

    200

    200

    200

    300
    0.48
    1.27E+05

    300
    1.21
    3.20E+05

    300
    1.45
    3.85E+05

    Upstream condition
    1. Case :
    2. Capacity Des.
    3. Sp. Gr.
    4. Viscosity
    5. Line Size/Class
    6. Pipe Inside Diam.
    7. Actual Length
    8. Equivalent Length
    9. Velocity
    10. Reynolds Number
    a. Rough. Value (e)
    b. e/D
    c. Frict. Factor
    11. Straight Line Loss
    12. Elevation
    13. Total loss, downstream

    1.80E-03
    2.25E-04

    1.80E-03
    2.25E-04

    2. Flowrate
    3. Pump head @ rated flow

    0.00461

    0.00410

    0.00403

    4. Inlet pressure

    0.038
    2
    0.27

    0.00332
    0.212
    2
    0.44

    0.00317
    0.301
    2
    0.53

    (cP)
    (inch/SN)
    (mm)
    (m)
    (m)
    (m/s)
    (inch)
    Basius Eq
    Churcill Eq
    (kg/cm2)
    (m)

    Summary
    1. Case

    1.80E-03
    2.25E-04
    0.00418

    MinFlow

    Destination
    (m3/hr)

    m3/hr
    m
    kg/cm2G
    2

    Norm Flow

    Max Flow

    VE-A104

    56.0

    141.0

    169.5

    1.179
    0.9

    1.179
    0.9

    1.179
    0.9

    203.2

    203.2

    203.2

    30

    30

    30

    45
    0.48
    1.27E+05
    1.80E-03
    2.25E-04
    0.00461
    0.00418
    0.006
    13
    1.50

    45
    1.21
    3.20E+05
    1.80E-03
    2.25E-04
    0.00410
    0.00332
    0.032
    13
    1.53

    45
    1.45
    3.85E+05
    1.80E-03
    2.25E-04
    0.00403
    0.00317
    0.045
    13
    1.54

    Min flow

    Normal flow

    Max flow

    56.0
    40

    141.0
    36

    169.5
    35

    4.71

    4.24

    4.12

    5. Total Pressure drop

    kg/cm

    2.83

    2.17

    1.95

    6. Outlet pressure

    kg/cm2G

    1.88

    2.07

    2.17

    Control Valve Instrument Datasheet Calculation


    FV-A5105
    Operating condition
    1. Fluid Name
    2. Temp. Min/Nor/Max
    3. Sp.Gr. Min/Nor/Max
    4. Vap. Press. Max
    5. Vis. Min/Nor/Max
    6. Capacity Nor.
    7. Capacity Overdesign
    8. Capacity Design
    Upstream condition
    1. Case :
    2. Capacity Des.
    3. Sp. Gr.
    4. Viscosity
    5. Line Size/Class
    6. Pipe Inside Diam.
    7. Actual Length
    8. Equivalent Length
    9. Velocity
    10. Reynolds Number
    a. Rough. Value (e)
    b. e/D
    c. Frict. Factor

    H2SO4 98%

    (kg/cm2A)
    (cP)
    (m3/hr)
    (%)
    (m3/hr)

    Destination
    (m3/hr)
    (cP)
    (inch/SN)
    (mm)
    (m)
    (m)
    (m/s)
    (inch)
    Basius Eq
    (kg/cm2)
    (m)
    kg/cm2G

    2.3

    1.1
    MinFlow

    Churcill Eq
    11. Straight Line Loss
    12. Elevation
    13. Total loss, Upstream

    30
    1.832
    0.0000
    27

    (oC)

    [suction capacity]
    Norm Flow

    Max Flow

    FV-A5105

    0.1

    0.2

    0.5

    1.832
    27

    1.832
    27

    1.832
    27

    1.5

    1.5

    1.5

    38.1

    38.1

    38.1

    315

    315

    315

    378
    0.02
    6.28E+01

    378
    0.05
    1.26E+02

    378
    0.12
    3.14E+02

    Upstream condition
    1. Case :
    2. Capacity Des.
    3. Sp. Gr.
    4. Viscosity
    5. Line Size/Class
    6. Pipe Inside Diam.
    7. Actual Length
    8. Equivalent Length
    9. Velocity
    10. Reynolds Number
    a. Rough. Value (e)
    b. e/D
    c. Frict. Factor
    11. Straight Line Loss
    12. Elevation
    13. Total loss, downstream

    1.80E-03
    1.20E-03

    1.80E-03
    1.20E-03

    2. Flowrate
    3. Pump head @ rated flow

    0.08523

    0.04926

    0.02845

    4. Inlet pressure

    0.019
    0
    0.02

    0.02360
    0.043
    0
    0.04

    0.01877
    0.156
    0
    0.16

    (cP)
    (inch/SN)
    (mm)
    (m)
    (m)
    (m/s)
    (inch)
    Basius Eq
    Churcill Eq
    (kg/cm2)
    (m)

    Summary
    1. Case

    1.80E-03
    1.20E-03
    0.02807

    MinFlow

    Destination
    (m3/hr)

    m3/hr
    m
    kg/cm2G
    2

    Norm Flow

    Max Flow

    TW-A502

    0.1

    0.2

    0.5

    1.832
    27

    1.832
    27

    1.832
    27

    1.5

    1.5

    1.5

    38.1

    38.1

    38.1

    50

    50

    50

    75
    0.02
    6.28E+01
    1.80E-03
    1.20E-03
    0.08523
    0.02807
    0.004
    10.5
    1.21

    75
    0.05
    1.26E+02
    1.80E-03
    1.20E-03
    0.04926
    0.02360
    0.009
    10.5
    1.22

    75
    0.12
    3.14E+02
    1.80E-03
    1.20E-03
    0.02845
    0.01877
    0.031
    10.5
    1.24

    Min flow

    Normal flow

    Max flow

    0.1
    24

    0.2
    23

    0.5
    23

    2.83

    2.71

    2.71

    5. Total Pressure drop

    kg/cm

    1.53

    1.38

    1.25

    6. Outlet pressure

    kg/cm2G

    1.30

    1.33

    1.46

    You might also like