Scribd
Upload
394 views1 page

Analysis

The document discusses determining shear stresses and forces in structural members. It provides examples of calculating maximum shear stresses and forces for different cross sections when given dimensions, materials and applied loads. It also discusses shear stress distributions and compares average to maximum shear stresses.

Uploaded by

MOFEEZALAM
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
394 views1 page

Analysis

The document discusses determining shear stresses and forces in structural members. It provides examples of calculating maximum shear stresses and forces for different cross sections when given dimensions, materials and applied loads. It also discusses shear stress distributions and compares average to maximum shear stresses.

Uploaded by

MOFEEZALAM
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

7.

2
79. Determine the largest shear force V that the member can sustain if the allowable shear stress is tallow = 8 ksi.

THE SHEAR FORMULA

375

713. Determine the maximum shear stress in the strut if it is subjected to a shear force of V = 20 kN. 714. Determine the maximum shear force V that the strut can support if the allowable shear stress for the material is tallow = 40 MPa.

710. If the applied shear force V = 18 kip, determine the maximum shear stress in the member.

3 in. 1 in.
V 3 in. 1 in.

12 mm

60 mm V 12 mm 80 mm 20 mm 20 mm

1 in.

Probs. 79/10

711. The wood beam has an allowable shear stress of tallow = 7 MPa. Determine the maximum shear force V that can be applied to the cross section.
50 mm 100 mm 50 mm 50 mm

Probs. 713/14

200 mm V 50 mm

715. Plot the shear-stress distribution over the cross section of a rod that has a radius c. By what factor is the maximum shear stress greater than the average shear stress acting over the cross section?

Prob. 711 *712. The beam has a rectangular cross section and is made of wood having an allowable shear stress of tallow = 200 psi. Determine the maximum shear force V that can be developed in the cross section of the beam. Also, plot the shear-stress variation over the cross section.
c y V

Prob. 715

V 12 in.

*716. A member has a cross section in the form of an equilateral triangle. If it is subjected to a shear force V, determine the maximum average shear stress in the member using the shear formula. Should the shear formula actually be used to predict this value? Explain.

a V 8 in. h

Prob. 712

Prob. 716

You might also like