INCENTIVES

4.1 Basic Concept Meaning and Definition What is incentive? In simple words, incentive is anything that attracts a worker and stimulateshim to work. The incentives can be financial and non-financial. Both types of incentives playimportant role under different conditions. For example, financial incentives are considered to bemore valued under the work conditions where wages are at low levels. On the contrary, non-financial incentives are more preferable where wage levels are high and the rate of tax is progressive. However, a review of research evidences indicates that there is a shift in emphasis inthe demands of employees and their unions from financial to nonfinancial benefits. The term incentive has been defined differently by different authors. We produce here a few of these definitions.According to the National Commission on Labor,"Wage incentives are extra financial motivation. They are designed to stimulate human effort by rewarding the person, over and above the time rated remuneration, for improvements in the present or targeted results". Burak and Smith have defined incentive as, " An incentive scheme is a plan or program tomotivate individuals for good performance. An incentive is most frequently built on monetary re-wards (incentive pay or a monetary bonus), but also may include a variety of non-monetaryrewards or prizes". According to VenkataRatnam and Srivastava, "A wage incentive scheme is a method of payment for work of an acceptable quality produced over and above a specified quantity or standard". Now we can define incentive as a system of payment under which the amount payable to hisoutput. Such a payment is also called 'payment by results' (PBR). Thus, PBR refers to a methodwhich provides for the "direct linking of workers earnings to a measure of their performance. The main features of incentives from the above definitions can be listed as follows: 1 Incentives are based on a standard of performance for the job. 2 Incentives are measurable in monetary terms. 3 Incentives are meant to motivate workers for better and more performance. 4 Incentiveshave direct linking to performance. 5 Incentives vary from person to person and from time to time for thesame person. 4.2 Objectives of Incentives 1.Profitable for both workers and management 2.Helpsto increase the production

3.reduce cost 4.Boostup morale by rewarding workers in proportion to their output 5.Recognize the worker for his good performance 6.Improve utilization of equipment, materials and service 7.Tofurnish a basis for cost control and labour control. 8.reduce labour turnover and absenteeism 9.aim at improve relations between workers and management. 4.3 LIMITATIONS 1.There is a possibility of reducing the quality of products since incentives are ususllybasedon output. 2.workers paid by results disregard security regulation in order to achieve output. It willincrease the danger of accidents 3.some workers may work day and night, it would affect their health. 4.jealousy and conflict may arise among employees, because some employees will earn more 5.workers may oppose introduction of new machines, methods as they fear that new methods or machines will decrease their earnings. 6.when production is disrupted due to management fault, the workers will insist to get compensation. An incentive scheme is usually based on three assumptions: 1. The belief that money is a strong motivator. 2. That the relationship between effort and reward can be systematically established. The relationship so based leaves no doubts in the minds of the concerned employees. 3. The feedback to the employees is immediate and dire 4.4 Classification of Incentives Incentives are classified as under. FINANCIAL AND NON FINANCIAL INCENTIVES
INDIVIDUAL AND GROUP INCENTIVES

(a)Financial incentives Financial incentives include Salary, premium, reward, dividend, bonus, income frominvestment. Fina ncial incentives play a very important role in improving the performance of the employees. Cash plays a very important role in fulfilling the needs of the individuals especially of labor class.

(b) Non financial incentives As the employees have other needs like respect and self centred needs , they can be motivated with the help of following non-financial incentives. Job satisfaction Job security Respect and recognition Training and other employee improvement programs Housing/medical/educational facilities Opportunities for growth. Suggestion scheme, praise, employee-superiors relationship etc Individual incentives Individual incentive are the extra compensation paid to an individual for all production over aspecified quantity. Advantages 1.Administration of individual incentives is simple because incentives can be given after the assessment of individuals work 2.each and everybody gets the return in accordance with work. This makes the person more dedicated towards the work. 3.persons who do the work with less efficiency are not entitled to incentives. Limitations 1.the employees inclination is more on quantity as compared to quality 2.rigidity of rates 3.this incentive system is inappropriate where delays are frequent and beyond theindividuals control as well as where the work is automated. 4.adverse effect on speeding production upon the health of the employee. 5.there is a problem of restriction of output in view of group pressures from the fellowemployees.

Group Incentives :
Group incentives system involve co-operation among employees , management and the unionfor reduction in labor, material and supply costs, strengthening of employee loyalty to thecompany. Advantages 1.Reduces absenteeism and production 2.reduces conflict and confusion among group members 3.group incentives lead to lesser control. Requirement of good incentive 1.Proper climate: this means that the relation between management and employees should be good and free from suspicion 2.Cooperation of workers 3.workers participation: wage incentive scheme should be implemented with theconsultation of workers and union. 4.scientific standard: the scheme must be based on scientific management. 5.simplicity: the incentive scheme should be simple and everybody must understand it. 6.equitable: this means the scheme should give equal opportunity to all. 7.flexible: changes may be required due to technological changes, market demand etc 8.less costly and wide coverage. 9.guarantee minimum wages: it will ensure a security to all 10.ceiling on earning: the maximum amount of earnings must be fixed. It will help tomaintain quality 11.grievance settlement on time 12. timely payment of incentive 13.follow up: required to rectify the mistakes in incentive scheme.

WAGE INCENTIVE We may define wage incentive as a system of payment under which the amount payable to a person is linked with his output. Such payment may be called payment with result. it refers to all plans that provide extra pay for extra performance in addition to regular wagesforajob- by Hummel & Nickerson.

Types of Wage incentive Schemes The following different wage incentive plans for Direct workers will be discussed here. 1.Straight piece rate 2.Halsey Premium plan 3.Rowan Premium plan 4.Bedaux Point Plan 5.Gantt Task & bonus plan 6.Emerson efficiency plan 7.Taylors differential plan Individual Incentive (PBR) Schemes Under this plan, employees are paid on the basis of results. The chief incentive plans includedinthis category are discussed in seriatim. Halsey Premium Plan: This plan, originated by F. A. Halsey, an American engineer, is acombination of the time and the piece wage in a modified form. Under this plan, a guaranteedwage based on past experience is determined. If a worker saves time, he gets 50% of wages for time saved (called premium) in addition to normal wages. It is optional for the worker to work onthe premium or not. Thus, this plan also provides incentive to efficient workers.

Total wages = Normal time wage + 50% of (time saved*time rate) = T R + 50%( S-T)R Where T = time taken(actual time), S = Standard time (time allowed),R = Rate per hour.
Advantages It is simple to understand. And guarantees time wages to employees The wages of time saved are shared by both employers and workers, so it is helpful inreducing labor cost It makes distinction between efficient and inefficient workers and gives increasingincentive to efficient workers Disadvantages Quality of the work suffers because workers are in a hurry to save more and more timeto get more and more incentive Workers criticize this method on the ground that the employer gets a share of wages of time saved.

Illustration: Rate per hour= Rs 15/hour Time allowed for job= 20 hours Time taken= 15 hours Calculate the total earnings of the worker under the Halsey plan S (standard time)= 20 hours T(time taken)= 15 hours R(rate)= Rs 15 per hour. Total earnings= TXR+50%(S-T)XR = 15X15+50/100(20-15)X15 = 225+2.5X15 Total wages for 15 hrs= 262.5 Find the effective rate of earnings = 262.5/15= Rs17.5 Rowan Premium Plan: This plan was developed by D. Rowan in 1901. Under this method , the worker is again guaranteed wages at the ordinary rate for time taken byhim to complete the job. The difference between Rowan and Halsey Premium plans are in thecalculation of bonus. Under Halsey plan, bonus is fixed percentage of the wages of time saved where as under Rowan plan, bonus is that proportion of the wages of the time taken which the time saved to thestandard time allowed.

Total wages= Normal time wage + Time saved Time taken Time rate Time allowed = T R + (S T)S T R Where T = time taken(actual time), S = Standard time (time allowed),R = Rate per hour.

Assume R- hourly wage rate=Rs10 ;T- Actual time taken to complete the job = 4 hours

S - Standard time or allowed time = 6 hours Total Wages = 410 +(6-4) / 6 410 = 40 + 13.3 = 53.3

Bedaux Plan Under this plan, every operation or job is expressed in terms of so many standard minutes., which are called Bedaux points or B s ; each B representing 1minute through time and motionstudy. Upto 100% performance ie upto standard Bs, the worker is paid time wages without any premium for efficiency. If the actual performance exceeds the standard performance in terms of Bs, then 75% of the wages of the time saved is paid to the worker as bonus and 25% is earned bythe foreman. For example, Standard time required for a job is 20 hours ie 1200 Bs in terms of minutes(20x60) where as a worker has taken 16 hours ie 960 Bs instead of 1200 Bs . The worker has saved 240 Bs or 4 hours (4x60). Suppose the time rate is Rs 20/- per hour , the time saved will be equal to Rs 80 ( 4x20) the worker will get 75% of Rs 80/- . So his total earnings will be as follows: Time wages for 16 hours-actual time taken@ Rs 20 per hour = Rs. 320 Bonus 75% of 4hrs wages (75/100x4x20) = Rs. 60 Total earnings = Rs. 380.

Emerson Efficiency Plan: Under this scheme, both standard work and day wage are fixed.Bonus is paid on the basis of worker's efficiency. A worker becomes entitled to get bonus onlywhen his/her efficiency reaches to 67%. The rate of bonus goes on increasing till he achieves100% efficiency. Above 100% efficiency, bonus will be 20% of the basic rate plus 1% for each1% increase in efficiency. In this way, at 120% efficiency, a worker receives a bonus of 40% andat 140% efficiency, worker gets 60% of the day wage as bonus. In this plan , bonus is payable only when efficiency touches 66.7%of standard laid down. The amount of bonus payable increases progressively with increase in efficiency in such amanner that at 100% efficiency, the bonus is 20% of hourly rate. For efficiency beyond100% additional 1% bonus is payable for each 1% increase in efficiency beyond 100%. Thus at 110% efficiency bonus payable is 30% and total wages payable are time wages for the actual time taken plus 30% of time wages as bonus.

Illustration: Standard output/day of 8 hrs is 16 units. Actual output of a worker for 8 hrs is 20 units. Rate per hour is Rs 2.5. calculate wage as per Emmersons efficiency plan Level of performance ..actual output/standard outputx 100 = 20/16x100=125% bonus payable is 45% as follows At 100% efficiency..20%of time wages For next 25% @1% .for each25%of time wages Total bonus 45% Time wages for 8 hours8x2.5.20 Add 45% bonus 45/100x20... 9 Total wages payable .Rs 29/-

Gantt Task and Bonus Plan : This plan is devised by H.L. Gantt. This plan combines time, piece wage and bonus. First a standard time is fixed for doing a job The actual performance is calculated with standard time and efficiency is determined If a worker takes more time than standard time (his efficiency is below 100%), he is given wages for the time If a worker takes standard time to perform the task (efficiency is 100%), he is given wagesfor standard time and a bonus of 20%of wage earned If a worker takes less than standard time, he is given wages for standard time plus a bonusof 20% of the wages for the standard time. In other words if the performance is more than100%, he is given wage plus 20% of piece wages Advantages 1.simple to understand 2.ensures guaranteed time wages to the worker who are below average

3.worker tries to become more efficient since increasing rate of bonus is verysatisfying to efficient workers .4.fixed cost per unit decreases with increase in production due to incentive for efficient workers Disadvantages 1.it divides the workers into two categories, one who earns the bonus and the other whodoes not. ILLUSTRATION Standard output per day = 1000 units Guaranteed payment = Rs 500/= ie 50 Ps/unit Worker A produces 850 units, so his performace is 85%-he will get Rs 500/- theguaranteed wages WorkerBs level of performance is 1000 units. So he will get Rs 500 plus 20% bonus pertaining to standard time ie 20% of 500 ieRs 100. soRs 600 Worker C s output is 1100 units, so his level of performance is 110% and therefore hewill get 20% piece wages as bonus Piece wages for 1100 units @ 50 paise= Rs 550 20% bonus= Rs. 110 Total..= Rs. 660

Taylors Differential Piece rate System This system was introduced by Taylor, the father of scientific management Taylor was of the view that that an inefficient worker had no place in an organization and heshould be penalised by paying low piece rate for low production. To encourage the worker tocomplete the work in standard time , he is given a lower piece rate. Thus if standard production has been fixed at 8 units/day of 8 hours , the higher piece rate for 8 units or beyond may be Re 1/= per unit and lower rate for an output if less than 8 units per day, may be 80 paisePerunit.Hence Taylor decided to give a large reward to those who would complete the work within or lessthan the standard time. The system is very harsh to inefficient workers on account of low rate andlow output. ILLUSTRATION

Calculate the earnings of workers A and B under straight piece rate system and Taylorsdifferential piece rate system Normal rate/hour= Rs 1.80 Std time/unit= 20 seconds Differential to be applied= 80% below std and 120% above std Worker A produces 1300 units per day and worker B produces 15000 units/day Solution Standard production per 20 seconds=1unit Therefore per minute=60/20=3units, per hour 3x60=180 units,per day of 8 hours will be 180x8=1440 units Normal rate/hour= Rs 1.80 Normal piece rate 180/180 units = 1 paise Low piece rate below standard production 1P 80/100= 0.8Paise High piece rate at or above standard= 1P 120/100=1.2 Paise FOR A Under straight piece rate system 1300 units@1P 13001/100=Rs 13 Under Taylors Differential plan 1300 units@ 0.8P=1300 8/101/100= Rs 10.40 FOR B Under Straight piece rate= 1500@IP = 15001/100 = Rs 15 Under Taylors Differential [email protected]=150012/10 1/100=Rs18