FS-8700-23 CB Link

A Sierra Monitor Company
Driver Manual
(Supplement to the FieldServer Instruction Manual)
FS-8700-23 Cleaver Brooks Hawk
APPLICABILITY & EFFECTIVITY Effective for all systems manufactured after April 2011
Driver Version: Document Revision:
1.01 1
FS-8700-23 Cleaver Brooks Hawk Driver Manual
Table of Contents
TABLE OF CONTENTS
1 2 3 4 5 CB-Link Description ........................................................................................................................................ 3 Driver Scope of Supply ................................................................................................................................... 3 rd 2.1 Provided by the Supplier of 3 Party Equipment ..........................................................................................3 Hardware Connections ................................................................................................................................... 4 Data Array Parameters ................................................................................................................................... 5 Configuring the FieldServer as a ChB-Link Client ............................................................................................ 6 5.1 FieldServer .....................................................................................................................................................6 5.2 Client Side Connection Descriptions ..............................................................................................................6 5.3 Client Side Node Descriptors .........................................................................................................................7 5.3.1 CB Link_ID ..............................................................................................................................................7 5.3.2 Node_Type .............................................................................................................................................8 5.4 Client Side Map Descriptors...........................................................................................................................8 5.4.1 FieldServer Related Map Descriptor Parameters ...................................................................................8 5.4.2 Driver Related Map Descriptor Parameters ...........................................................................................8 5.4.3 Timing Parameters .................................................................................................................................8 5.4.4 Map Descriptor Example ........................................................................................................................9
Appendix A. Reference ........................................................................................................................................ 10 Appendix A.1. Device Information Table .................................................................................................................10 Appendix A.1.1. Property Files..........................................................................................................................10 Appendix A.1.2. Configuration Files .................................................................................................................11 Appendix A.2. Driver Compatibility Matrix ..............................................................................................................11
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: [email protected]
Page 3 of 11
CB-LINK DESCRIPTION
The CB-Link driver allows the FieldServer to transfer data to and from devices over RS-485 using CB-Link protocol. The information that follows describes how to expand upon the factory defaults provided in the configuration files included with the FieldServer. Refer to Model 833-2771 CB-Link Manual #65-0216 and Model 833-2757 General Purpose Interface ControlBus Module Manual #65-0220 from Cleaver Brooks.
2 2.1
DRIVER SCOPE OF SUPPLY Provided by the Supplier of 3 rd Party Equipment

Description CB-Link Controller
PART #
Page 4 of 11
HARDWARE CONNECTIONS
The FieldServer can be connected to the CB Link device as shown below. Configure the PLC according to manufacturers instructions
CLEAVER BROOKS MODEL 833-2771 CB LINK or HONEYWELL Q7700 NETWORK INTERFACE UNIT
833-2425
833-2757
AKA: ASCII INTERFACE EMS INTERFACE BDI CARD QS7850 GPI (GENERALPURPOSE INTERFACE)
FURTHER CB-LINKS
SLOT
6 A B C
C1
C2
POSSIBLE DEVICES BCS7700 CB-HAWK RM7800 RM7800 QS7X00X PULSATROL, Q7700 BURNER CONTROL BURNER CONTROL BURNER CONTROL EXPANDED ANNUNCIATOR CARDS (QM40XX, TRAPSCAN) NETWORK INTERFACE. etc
RS485 9600 N81
CONFIG PC (RUISYS)
RS-485 Opto Isolated
Gnd _ + FG Gnd _ +
CB HAWK
FieldServer
Page 5 of 11
DATA ARRAY PARAMETERS
Data Arrays are protocol neutral data buffers for storage of data to be passed between protocols. It is necessary to declare the data format of each of the Data Arrays to facilitate correct storage of the relevant data. Section Title Data_Arrays Column Title Data_Array_Name
Function Provide name for Data Array Provide data format. Each Data Array can only take on one format. Number of Data Objects. Must be larger than the data storage area required by the Map Descriptors for the data being placed in this array.
Data_Array_Format
Legal Values Up to alphanumeric characters FLOAT, BIT, Int32, 1-10, 000
15
Int16,
Data_Array_Length
Example // Data Arrays Data_Arrays Data_Array_Name DA_AI_01
, Data_Array_Format , Float
, Data_Array_Length , 200
Page 6 of 11
CONFIGURING THE FIELDSERVER AS A CHB-LINK CLIENT
For a detailed discussion on FieldServer configuration, please refer to the FieldServer Configuration Manual. The information that follows describes how to expand upon the factory defaults provided in the configuration files included with the FieldServer (See .csv sample files provided with the FieldServer). This section documents and describes the parameters necessary for configuring the FieldServer to communicate with a ChB-Link Server Note that * indicates an optional parameter, with the bold legal value being the default.
5.1
FieldServer
Section Title Bridge Column Title Title System_Node_ID Example
Function Title for CSV file Node ID of the FieldServer
Legal Values Any text, Maximum 32 characters 8 254
// Common Information Bridge Title CB_Link client
, System_Node_ID , 11
5.2
Client Side Connection Descriptions
Section Title Connections Column Title Port Baud Parity IC_Timeout Squelch_Timer Poll_Delay Example
Function Specify which port the device is connected to the FieldServer Specify baud rate Specify parity Inter-Character Timeout Squelch suppression time Minimum time between polls
Legal Values R1-R2 9600 None 10 s 0.02 s 0.6
// Client Side Connections Connections Port R1
, Baud , 9600
, Parity , None
, IC_Timeout , 10
, Squelch_Timer , 0.02
, Poll_Delay , 0.6
Page 7 of 11
5.3
Client Side Node Descriptors
Section Title Nodes Column Title Node_Name CB Link_ID Protocol Port Node_Type Example
Function Provide name for node Device address Specify protocol used Port connection Specify controller connected to CB-Link
Legal Values Up to 32 alphanumeric characters Refer to Section 5.3.1 CB_Link R1-R2 See Section 5.3.2
// Client Side Nodes Nodes Node_Name CBH1
, CBlink_ID , 0 1 20
, Protocol , CB_Link
, Port , R1
, Node_Type , Hawk
5.3.1 CB Link_ID
The CB Link ID is declared in the format A B C where: A describes the number of CB-Link units attached. Legal values 0 (1 Link Attached - default), 8-24 (Multiple Links Attached) B describes the slot the device is attached to in the PC Link 1-5, default 1 C: describes the Device type (Declare Device Type Code from the following table): Device Description Auxenh Ec78xx Efenh Hawk Llenh Orenh Pulsa Q7700 Qm40xx Rm78xx S7800 S7830 Tdenh Testcard Trapscan Device Type Code 26 32 26 20 26 26 19 1 17 32 36 34 26 99 18
Page 8 of 11
5.3.2 Node_Type
Hawk, EC78XX. Others by request. (Refer to Appendix A.1
5.4
Client Side Map Descriptors
5.4.1 FieldServer Related Map Descriptor Parameters

Column Title Map_Descriptor_Name Data_Array_Name Data_Array_Offset Function Function Name of this Map Descriptor. This Name refers to the variable in the related .bp2 property file. Name of Data Array where data is to be stored in the FieldServer Starting location in Data Array Function of Client Map Descriptor Legal Values Any of the variable names in the related .bp2 property file. One of the Data Array names from Data Array section above 0 to maximum specified in Data Array section above RDBC
5.4.2 Driver Related Map Descriptor Parameters

Column Title Node_Name Scan_Interval Function Name of Node to fetch data from Specify poll rate Legal Values One of the node names specified in Client Node Descriptor above >1.0s
5.4.3 Timing Parameters

Column Title Timeout Function Specify maximum response time Legal Values >30.0s
Page 9 of 11
5.4.4 Map Descriptor Example

// Client Side Map Descriptors Map_Descriptors Map_Descriptor_Name Control_Source Oper_Pressure
, Data_Array_Name , DA_AI_01 , DA_AI_01
, Data_Array_Offset ,1 ,2
, Function , RDBC , RDBC
, Node_Name , CBH1 , CBH1
, Scan_Interval , 10 , 10
, Timeout , 30 , 30
Page 10 of 11
Appendix A. Reference
Appendix A.1. Device Information Table

NETWORK INTERFACE UNIT MAKE MODEL NAME Honeywell Q7700 Network Interface Unit Cleaver Brooks 833-2771 CB-Link CONTROL MODULES MAKE MODEL No. MODULE NAME OF MODULE BCS7700 7800 SERIES Control QM40XX Data Acquisition Module Trapscan System PulsaFeeder PULSAtrol S7830 Expanded Annunciator S7800 Keyboard/Display Module PROPERTY FILE CONFIGURATION FILE NOTES NAME (.BP1;.BP2) NAME (.CSV) N/A N/A ON REQUEST ON REQUEST PULSA S7830 N/A N/A QM40XX ON REQUEST PULSA S7830 Expanded Annunciator Data Acquisition Modules
Honeywell QS7700A Honeywell QS7800A Honeywell QS7800C Armstrong QS7800D Honeywell QS7800E Honeywell QS7800A
Honeywell QS7800A
S7800
S7800 Requires module RM78XX RM78XX S7800
Honeywell QS7800A Honeywell Honeywell Honeywell N/A CB-Link 833-2727 CB-Link CB-Link CB-Link CB-Link 833-2729 833-2734 833-2734 833-2734
ST7800 Relay Module ST7800 RM7800E,G,L,M Relay RM78XX Modules RM7840E,G,L,M Relay RM78XX Modules Q7700A,B Display Module Data Control Module CB 783 CB 780 CB 784 N/A Bus N/A ON REQUEST ON REQUEST ON REQUEST N/A N/A ON REQUEST ON REQUEST ON REQUEST
Requires 833-2727 or 833-2729 on module
Appendix A.1.1.
Property Files
Each Controller interfacing to the FieldServer requires associated property files (denoted by file extensions .bp1 and .bp2) to be loaded into the FieldServer. The property files listed in the device information table (Appendix A.1) are preloaded onto the FieldServer when delivered. Other property files may be available upon request.
This is the chassis that the above modules plug into FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: [email protected]
FS-8700-23 Cleaver Brooks Hawk Driver Manual Appendix A.1.2. Configuration Files
Page 11 of 11
Each Controller has an associated configuration file as shown in the device information table (Appendix A.1). This configuration file contains the mapping for the related module and can be used as a basis for building a configuration for the FieldServer. Note: SYSNet is the generic name for networks of the listed modules. Controlbus is the generic name for the networks in a NIM/CBLink configuration
Appendix A.2. Driver Compatibility Matrix

FieldServer Model FS-x2010 FS-x2011 FSx25 FS-x30 FS-x40 SlotServer ProtoNode ProtoCessor FPC-FO2 ProtoCessor FPC-FD2 QuickServer FS-QS-1010 QuickServer FS-QS-1011 Compatible with this driver Yes Yes No Yes Yes No No No No No No

FS-8700-23 CB Link

Uploaded by

Copyright:

Available Formats

FS-8700-23 CB Link

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

FS-8700-23 CB Link

Uploaded by

Copyright:

Available Formats

A Sierra Monitor Company

FS-8700-23 Cleaver Brooks Hawk

Driver Version: Document Revision:

FS-8700-23 Cleaver Brooks Hawk Driver Manual

FS-8700-23 Cleaver Brooks Hawk Driver Manual

DRIVER SCOPE OF SUPPLY Provided by the Supplier of 3 rd Party Equipment

FS-8700-23 Cleaver Brooks Hawk Driver Manual

RS485 9600 N81

RS-485 Opto Isolated

FS-8700-23 Cleaver Brooks Hawk Driver Manual

DATA ARRAY PARAMETERS

Legal Values Up to alphanumeric characters FLOAT, BIT, Int32, 1-10, 000

Example // Data Arrays Data_Arrays Data_Array_Name DA_AI_01

FS-8700-23 Cleaver Brooks Hawk Driver Manual

CONFIGURING THE FIELDSERVER AS A CHB-LINK CLIENT

Section Title Bridge Column Title Title System_Node_ID Example

Function Title for CSV file Node ID of the FieldServer

Legal Values Any text, Maximum 32 characters 8 254

// Common Information Bridge Title CB_Link client

Client Side Connection Descriptions

Legal Values R1-R2 9600 None 10 s 0.02 s 0.6

// Client Side Connections Connections Port R1

FS-8700-23 Cleaver Brooks Hawk Driver Manual

Client Side Node Descriptors

// Client Side Nodes Nodes Node_Name CBH1

FS-8700-23 Cleaver Brooks Hawk Driver Manual

Client Side Map Descriptors

5.4.1 FieldServer Related Map Descriptor Parameters

5.4.2 Driver Related Map Descriptor Parameters

5.4.3 Timing Parameters

FS-8700-23 Cleaver Brooks Hawk Driver Manual

5.4.4 Map Descriptor Example

, Data_Array_Name , DA_AI_01 , DA_AI_01

, Function , RDBC , RDBC

, Node_Name , CBH1 , CBH1

FS-8700-23 Cleaver Brooks Hawk Driver Manual

Appendix A.1. Device Information Table

S7800 Requires module RM78XX RM78XX S7800

Requires 833-2727 or 833-2729 on module

Appendix A.2. Driver Compatibility Matrix

You might also like