Just 2012

Market Rate Analysis and Justification Statement
Construction of 09 Nos. Residential quarters (Type-III/06 Nos. & Type-II/03 Nos.) for Central School of Tibetans Department's at Kalimpong (West Bengal) including internal water supply and sanitary installations. Lowest Tenderer :
Estimated cost on which justificatio n done
0.00
Total Justified cost Lowest Percentage Percentage Percentage tender of Justified of lowest of lowest amount as cost tender tender per correspondi amount correspondi comparative ng to EC put correspondin ng to total statement to tender g to EC put Justified cost to tender Remarks
Correspondi Estimated ng Justified cost put to cost (i.e. 1% tender Labour Cess and 2 % VAT)
(Rs.) 1 248,027
(Rs.) 2 243,779
(Rs.) 3 252,631
(Rs.) 4 248,304
(Rs.) 5 20,226
(%) 6 1.71
( % below )
(%) 7 91.99
( % below )
(%) 8 91.85
( % below )
9 98.18 % items has been justified
Assistant Engineer (P) Siliguri Central Circle CPWD, Siliguri
Executive Engineer (P&A) Siliguri Central Circle CPWD, Siliguri
Superintending Engineer Siliguri Central Circle CPWD, Siliguri
Comparative Statement and Justification of Tender Name of work:

Construction of 09 Nos. Residential quarters (Type-III/06 Nos. & Type-II/03 Nos.) for Central School of Tibetans Department's at Kalimpong (West Bengal) including internal water supply and sanitary installations.
Item No DSR "2007" Item No
Unit
Quantity
Rate
Amount
1/1
JUSTIFIED
Description Rate Earth Work All kinds of soil 100sqm 2.00 2.00 MORTARS Cement Mortar 1:1 (1 cement : 1 fine sand) cum 2.00 CONCRETE WORK Cement : 1 coarse sand : 2 graded stone cum 1:1:2 (1 aggregate 20 mm nominal size) 2.00 REINFORCED CEMENT CONCRETE cum 1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size). 2.00 Cement mortar 1:4 (1 cement : 4 coarse sand) BRICK WORK cum 2.00 Cement mortar 1:6 (1 cement : 6 coarse sand) STONE WORK cum 2.00 Area MARBLE WORK of slab upto 0.50 sqm sqm 2.00 S WOOD WORK econd class teak wood cum 2.00 Steel work Structural steel work in single section fixed with or kg without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 2.00 1:4 (1 cement : 4 coarse sand) Flooring sqm 2.00 Roofing 1.00mm thick with zinc coating not less than sqm 275gm/m 2.00 1:4 (1 cement: 4 fine sand) Finishing sqm 2.00 With Repairs to Buildingcement mortar 1:4 (1 cement : 4 fine sand). sqm 2.00 Dismantling &Demolishing lime concrete manually/ by mechanical cum Demolishing means and disposal of material within 50 metres lead as per direction of Engineer in charge. 2.00 Road Work Preparation and consolidation of sub grade with sqm power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm. depth, dressing to camber and consolidating with road roller including making good the undulations etc. and rerolling the sub grade and disposal of surplus earth with lead upto 50 metres. 2.00 Sanitary InstallationsVitreous china Orissa pattern W.C. pan of size each White 580x440mm with integral type foot rests. Water Supply1216 (16 mm OD) pipe metre 2.00 DRAINAGE 100 mm diameter metre 2.00 DRAINAGE 100 mm diameter S.W. pipe metre 2.00 400 mm dia piles Pile Work metre 2.00 2.00 Aluminium Work kg Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 2.00 Using rough kota stone. WATER PROOFING sqm 3786.95 5961.50 6143.55 6333.40 3508.25 3059.20 2222.90 85813.30 59.90 7574.00 11923.00 12287.00 12667.00 7017.00 6118.00 4446.00 171627.00 120.00 6333.00 Amount 0.00 0.00 7560.00 0.00 12666.00 0.00 0.00 0.00 0.00 Rate 3786.95 5899.10 6013.81 6348.64 2743.77 2535.96 2215.53 85690.63 59.90 Amount 7574.00 11798.00 12028.00 12697.00 5488.00 5072.00 4431.00 171381.00 120.00
Amount not Justified Amount 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
2.1.1
3.1 4.1.1 5.1.1 6.1.1 7.1.1 8.1.1.1 9.1.1 10.1
3780.00
11.1.1 12.1.1 13.1.1 14.1.1 15.1 16.1
489.20 878.45 123.50 186.40 234.20 61.25
978.00 1757.00 247.00 373.00 468.00 123.00
0.00 0.00 0.00 0.00 0.00 0.00 121.95 128.45 61.26
0.00 0.00 244.00 0.00 257.00 123.00
978.00 1757.00 0.00 373.00 0.00 0.00
17.1.1 18.1.1 19.1.1 19.2.1 20.1.1 21.1.1.1 22.1.1
2964.10 187.75 150.10 496.90 1750.65 358.45 732.85
5928.00 376.00 300.00 994.00 3501.00 717.00 1466.00
0.00 0.00 0.00 0.00 0.00 0.00 0.00
2917.51
5835.00 0.00 0.00 951.00 2858.00 677.00 1441.00
0.00 376.00 300.00 0.00 0.00 0.00 0.00
475.56 1428.85 338.32 720.49
file:///var/www/apps/conversion/tmp/scratch_1/117908360.xls
2 of 1096
Comparative Statement and Justification of Tender Item No DSR "2007" Item No 23.1
Unit
Quantity
Rate
Amount
1/1
JUSTIFIED
Description Rate Horticulture & Landscaping Trenching in ordinary soil up to a depth of 60cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). Rain Water Harvestingdia. 300 mm & Tubewells CONSERVATION OF out joints ofBUILDING Raking HERITAGE stone masonry surface to the required width and depth, with due care and precaution, by mechanical / manual means, including preparing and cleaning the surface for re-pointing/ refilling of joints, including disposal of rubbish to the dumping ground within 50 metre lead. Electrical Works mm 20 EARTH WORK Supplying & filling with carried earth by mechanical transport i/c royality & cost of earth, excavation at source, loading into truck, unloading the same at site, banking the earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling, each layer with tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8-10 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, upto all lead & lift, all as per direction of Engineer-incharge. cum
2.00
Amount not Justified Amount 0.00 Amount 62.00
30.90
62.00
Amount 0.00
Rate
24.1.1.1 25.1
metre sqm
2.00 2.00
358.90 19.85
718.00 40.00
0.00 0.00
0.00 0.00
718.00 40.00
26.1.1 2.27.A
meter cum
2.00 2.00
77.00 324.80
154.00 650.00
0.00 0.00
77.00 324.78
154.00 650.00
0.00 0.00
3 of 1096
Comparative Statement and Justification of Tender Item No DSR "2007" Item No

Unit
Quantity
Rate
Amount
1/1
JUSTIFIED
Description Rate Amount Rate Amount
Amount not Justified Amount
Position of tender : -
Total
252,631 Estt. cost
20,226.00 1st Lowest 0.00

Rs.20,226.00
243,779
4,604
The Lowest Tenderer is Lowest Tendered Amount = ADD 0.00%
For Labour cess and Vat = Total Justified Cost =
0.00 243,779.00
AE(P)
EE(P & A )
4 of 1096
BASIC RATES : HIRE CHARGES OF TOOL AND PLANTS

Back to Main
Code No
1 2 3 4 5 6 7 8 9 10 11 12 13 14 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 33 37 38 39 40 41 42 43 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 68 69 70
Description of Tool and Plants

Hire charges of Coaltar Boiler 900 to 1400 litres Hire charges of Concrete Mixer 0.14 cubic metre Hire charges of Diesel Road Roller - 8 to 10 tonne
Unit
Day Day Day
Rate Rs.
800 800 1500
Production cost of concrete by batch mix plant. cum 350 Hire charges of Diesel Truck - 9 tonne Day 1600 Hire charges of Spraying machine including electric charges Day 250 Hire charges of Coaltar Sprayer Day 300 Hire charges of Barber green, drying, mixing and Asphalt Plant, with accessories, capacity 30/45 tonne Day 7500 Pumping charges of concrete including Hire charges of pump, piping work & accessories etc. cum 130 Hire charges of Derrick monkey rope Day 775 Hire charges of Pump set of capacity 4000 litres/hour. Day 500 Vibrator (Needle type 40mm) Day 300 Machine for rubbing of floors Day 300 Front end loader Day 5000 Mastic Cooker Day 740 Hire and running charges of tipper Day 1700 Hire and running charges of loader. Day 5000 Hand Grinder For mirror polish Day 200 Hydraulic Excavator (3D) with driver and fuel. Day 7500 Pin vibrator Day 325 Surface Vibrator Day 400 Hot Bitumen mixer 0.5 cum i/c hand cart Day 4000 Hire and running charges of hydraulic piling rig with power unit etc. including34000 Day complete accessories and shifting at si Hire and running charges of light crane. Day 2200 Hire and running charges of bentonite pump. Day 4200 Hire and running charges of vibrating pile driving hammer complete with power unit and accessories. Day 35000 Hire and running charges of crane 20 tonne capacity. Day 9250 Carriage of concrete by transit mixer. cum/km 30 Generator 250 KVA. Day 2200 Paint applicator. Day 750 Mobile crane. Day 6500 Tractor with ripper attachment. Day 1350 Tractor with trolley. Day 1350 Air compressor 250 cfm with two leads for pneumatic cutters/ hammers. Day 1800 Joint cutting machine with 2-3 blades Day 900 C.C .batch mix plant. Day 10000 Road sweeper Day 550 Slip form paver with sensor. Day 13000 Water tanker 5000 Ltr. Capacity Day 1000 Concrete joint cutting machine. Day 900 Texturing machine. Day 925 Dozer D-80-A 12 hour 3800 Motor Grader 3.35 metre blade hour 2450 Hydraulic Excavator of 1 cum bucket hour 1300 Front end loader 1 cum bucket capacity (incl POL) hour 800 Tipper -5 Cum tonne km 3 Vibratory roller 8 to 10 tonne hour 1550 Smooth Wheeled Roller 8 to 10 tonne hour 460 Tandem Road Roller hour 1150 Water Tanker 5 to 6 KL capacity hour 150 Air compressor hour 325 Wet Mix Plant 60 TPH hour 1200 Mechanical Broom Hydraulic hour 360 Emulsion Pressure Distributor @ 1750 sqm per hour hour 800 Hot mix Plant -120 TPH capacity hour 23700 Hot mix Plant 100 TPH Capacity hour 17500 Paver finisher Hydrostatic with sensor control 100 TPH hour 2700 Paver finisher Mechanical 100 TPH hour 1000 Batching and Mixing Plant @ 75 cum per hour hour 2500 Concrete Paver finisher with 40 HP Motor and sensor hour 2900 Generator 250 KVA hour 900 Generator 100 KVA/125 KVA hour 700
71 75 76 80 81 82 51 52 53
Truck 5.5. cum/ 10 tonnes tonne km 3 Road sweeper (Mechamical Broom) @ 1250 sqm. Per hourhour 360 Drum Type HMP of 60-90 TPH capacity @ 75 tonne per hour actual output 14000 hour Hire and running charges of drill machine up to 400 mm dia (including cost of 7500 oil, diesel consumption in ordina Day mobile Hire charges of light Road Roller - 1 tonne day 400 Hire and running charges of drill Bit day 800 Rate for each mobilisation Per Job 39500 Hire charge of sinking tubewell machine per day 25000 Hire charge of Washing & developing tubewell with Air compressor pump & engine per day 10000
Note :- Above hire - charges (from item code 0049 to 0080) include cost of services of operating staff, supply of lubr
BASIC RATES : LABOURER

Construction of 09 Nos. Residential quarters (Type-III/06 Nos. & Type-II/03 Nos.) for Central School of Tibetans Department's at Kalimpong (West Bengal) including internal water supply and sanitary installations. Note :These rates are exclusive of contractors profit & over heads but include octroi, royalty, sales tax (VAT) and carriage etc.
Code No
100 101 102 103 111 112 113 114 115 116 117 119 122 123 124 125 126 127 128 130 131 132 133 134 135 138 139 141 155 156 157 159 160
Description of Labourer
Unit
Rate Rs.
Bandhani Day 260 Bhisti Day 260 Blacksmith 1st class Day 301 Blacksmith 2nd class Day 273 Carpenter 1st class Day 301 Carpenter 2nd class Day 273 Chowkidar Day 247 Beldar Day 247 Coolie Day 247 Fitter (grade 1) Day 301 Assistant Fitter or 2nd class Fitter Day 273 Glazier Day 273 Mason (for plaster of paris work) 1st class Day 301 Mason (brick layer) 1st class Day 301 Mason (brick layer) 2nd class Day 273 Mason (for plain stone work) 2nd class) Day 273 Mason (for ornamental stone work) 1st class Day 301 Driver (for Road Roller, Concrete Mixer, Truck etc.) Day 301 Mate Day 260 Mistry Day 301 Painter Day 273 Rock Excavator Day 247 Rock Breaker Day 247 Rock Hole Driller Day 247 Stone Chiseller Day 260 Sprayer (for bitumen, tar etc.) Day 260 Skilled Beldar (for floor rubbing etc.) Day 260 White Washer Day 260 Mason (average) Day 287 Carpenter (average) Day 287 Operator (Pile/ Special machine) Day 327 Skilled torch operator for laying tack Day 301 Labour & Mistry charges for drilling tube well with all arrangements and sundries per day Note :- ** These rates are average of 1st class and 2nd class categories.
DSR 2012
01.10.09
Labourer Rate / 01.04.10
Date from which
Rate Rs.
260 260 301 273 301 273 247 247 247 301 273 273 301 301 273 273 301 301 260 301 273 247 247 247 260 260 260 260 287 287 327 301
Rate Rs.
158 158 192 158 192 158 135 135 135 192 158 158 192 192 158 158 225 158 158 158 158 158 158 192 158 135 158 158 175 175 158 158
Rate Rs.
174 174 211 174 211 174 149 149 149 211 174 174 211 211 174 174 248 174 174 174 174 174 174 211 174 149 174 174 192.5 192.5 174 174
** **
ourer Rate /
Date from which effective 01.10.10 01.04.11 01.10.11
Rate Rs.
182 182 220 182 220 182 156 156 156 220 182 182 220 220 182 182 259 182 182 182 182 182 182 220 182 156 182 182 201 201 182 182
Rate Rs.
192 192 232 192 232 192 165 165 165 232 192 192 232 232 192 192 273 192 192 192 192 192 192 232 192 165 192 192 212 212 192 192
Rate Rs.
199 199 240 199 240 199 171 171 171 240 199 199 240 240 199 199 283 199 199 199 199 199 199 240 199 171 199 199 219.5 219.5 199 199
BASIC RATES : CONSTRUCTION MATERIALS

These rates are exclusive of contractors profit, over heads and carriage but include octroi, royalty,sales tax (VAT) etc. Construction of 09 Nos. Residential quarters (Type-III/06 Nos. & Type-II/03 Nos.) for Central School of Tibetans Department's at Kalimpong (West Bengal) including internal water supply and sanitary installations. Note :-
Code
222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 285 286 287 291 291A 292 293 294 295 296 297 298 302 303 304 305 308 309 310 312 313 314 316 317 318 322 324 325 326 328 332 332A 336 339 341 346 347 348 362 364 365 367 368 370 373 378 379 380 381 382 383
Description of Materials Unit Seam bolts and nuts 6 mm dia and 25 mm long 10 Nos Non - Asbestos fibre cement corrugated sheet 6mm thick. sqm Non - Asbestos fibre cement close fitting adjustable ridge. etre m Non - Asbestos fibre cement corrugate serrated adjustable ridge. metre Non - Asbestos fibre cement plain wing adjustable ridge. metre Non - Asbestos fibre cement unserrated adjustable ridge metre for hips. Non - Asbestos fibre cement corrugated apron piece. metre Non - Asbestos fibre cement eaves filler piece. each Non - Asbestos fibre cement north light curves. metre Non - Asbestos fibre cement ventilator curves. each Non - Asbestos fibre cement barge boards 6 mm thick. metre Non - Asbestos fibre cement ridge finial . pair Non - Asbestos fibre cement special north light curves. each Non - Asbestos fibre cement S type louvers. each Non - Asbestos multi purpose fibre cement board 6mm thick. sqm Non - Asbestos multi purpose fibre cement board 8mm thick. sqm Brick Aggregate (Single size) : 63 mm nominal size cum Brick Aggregate (Single size) : 50 mm nominal size cum Brick Aggregate (Single size) : 40 mm nominal size cum Stone Aggregate (Single size) : 63 mm nominal size cum Stone Bolder (Single size) : 100 mm nominal size cum Stone Aggregate (Single size) : 50 mm nominal size cum Stone Aggregate (Single size) : 40 mm nominal size cum Stone Aggregate (Single size) : 25 mm nominal size cum Stone Aggregate (Single size) : 20 mm nominal size cum Stone Aggregate (Single size) : 12.5 mm nominal size cum Stone Aggregate (Single size) : 10 mm nominal size cum Stone Aggregate (Single size) : 06 mm nominal size cum Safeda ballies 125 mm diameter Cow Dung Bajri Bamboo 25 mm dia 2.5 metre long metre cum cum score
Rate 35 250 200 200 200 280 200 150 310 390 395 140 514 250 182 206 475 490 500 850 900 950 1000 1050 1050 1050 1100 37 47 900 300
Bhusa quintal 375 Paving bitumen S-90 of approved quality tonne 37000 Bitumen emulsion tonne 28500 Bitumen grade PMB - 40 M.T. 41400 Blown type petroleum bitumen of penetration 85/25 of approved quality 37000 tonne Bitumen hot sealing compound : grade A kilogram 26 Bitumen solution primer of approved quality litre 40 Premoulded joint filler 12 mm thick sqm 350 Bitumen felt fibre base (vegetable or animal):Type 2 grade 1 sqm 55 Bitumen felt :Type 3 grade 1 sqm 50 Coal Tar litre 25 Blasting powder kilogram 35 Blasting fuse (fuse wire) each 15 White face insulating board:12 mm thick sqm 360 Natural colour insulating board:12 mm thick sqm 270 Cement bonded partial board:8 mm thick sqm Flame retardant face insulating board: 12 mm thick sqm 315 Flame retardant face insulating, Impregnated fibre board sqmmm thick 12 350 Flat pressed 3 layer particle board (medium density) Grade I :12 mm thick 325 sqm Extra for veneered particle board with : Teak veneering on one side and commercial veneered on other side sqm 235 Extra for veneered particle board with : Commercial veneering on both side 155 sqm Extra for veneered particle board with : Teak veneering on both sides sqm 455 Brick bats cum 325 Wire brush each 20 Soft brush each 18 Portland Cement tonne 5000 White Cement tonne 12000 Coal (steam) quintal 400 Cramp Gun metal 25x6x300 mm each 70 Brass butt hinges (light/ordinary type) : 125x70x4 mm 10 Nos 800 Brass butt hinges (light/ordinary type) : 100x70x4 mm 10 Nos 650 Brass butt hinges (light/ordinary type) : 75x40x2.5 mm 10 Nos 400 Brass butt hinges (light/ordinary type) : 50x40x2.5 mm 10 Nos 175 Brass butt hinges (heavy type) : 125x85x5.5 mm(.70)kg 10 Nos 2900 Brass butt hinges (heavy type) : 100x85x5.5 mm(.56)kg 10 Nos 2600
Code
384 385 386 387 388 389 390 391 392 393 394 400 401 402 403 404 405 406 408 409 410 411 412 413 414 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 438 442 444 445 446 447 449 450 451 452 453 524 525 526 527 528 555 556 557 558 568 569 570 571 583 584 585 586 587 588 589 590 591
Rate Unit 10 Nos 900 10 Nos 2600 10 Nos 2300 10 Nos 2000 10 Nos 1600 each 300 each 250 each 150 each 500 each 350 each 300 each 225 each 175 each 140 each 90 each 140 each 120 each 85 each 140 each 125 each 95 each 160 each 150 each 350 Brass mortice latch and lock 100x65 mm with6 levers and a pair of brass lever handles Brass mortice latch 100x65mm with a pair of brass lever handles each 300 Brass 150 mm floor door stopper (0.357kg) each 160 Brass hard drawn hooks and eyes 300 mm 10 Nos 700 Brass hard drawn hooks and eyes 250 mm 10 Nos 675 Brass hard drawn hooks and eyes 200 mm 10 Nos 625 Brass hard drawn hooks and eyes 150 mm 10 Nos 600 Brass hard drawn hooks and eyes 100 mm 10 Nos 500 Brass casement window fastener Each 45 Brass casement stays (straight peg type ) 300 mm weighing not less than 0.33 kg each 120 Brass casement stays (straight peg type ) 250 mm weighing not less than 0.28 kg Each 100 Brass casement stays (straight peg type ) 200 mm weighing not less than 0.24 kg each 90 Brass quadrant stays 300 mm each 120 Brass fanlight catch 10 Nos 170 Brass fanlight pivot 10 Nos 190 Brass chain with hook for fan light catch each 30 Brass hasps and staples (safety type) 300 mm 10 Nos 700 Brass hasps and staples (safety type) 115 mm 10 Nos 600 Brass hasps and staples (safety type)90 mm 10 Nos 500 Brass Night latch each 450 Brass helical spring 150 mm each 300 Brass curtain rod 20 mm dia 1.25 mm thick metre 100 Brass curtain rod 25 mm dia 1.25 mm thick metre 120 Brass brackets (curtain rods) 20 mm each 40 Brass cupboard knob or ward robe knob 50 mm each 30 Brass screws 50 mm 100 Nos 200 Brass screws 40 mm 100 Nos 160 Brass screws 30 mm 100 Nos 130 Brass screws 25 mm 100 Nos 95 Brass screws 20 mm 100 Nos 80 Chromium plated Brass butt hinges (heavy) type 75x65x410 Nos 200 gms 950 .0 mm Chromium plated Brass butt hinges (light/ordinary) type 125x70x4 10 Nos 810 Chromium plated Brass butt hinges (light/ordinary) type 100x70x4mm 10 Nos 675 Chromium plated Brass butt hinges (light/ordinary) type 10 Nos 75x40x2.5 425 Chromium plated Brass butt hinges (light/ordinary) type 10 Nos 50x40x2.5 185 Chromium plated Brass handles 125 mm with plate 175 x32 mm Each 160 Chromium plated Brass handles 100 mm with plate 150 xEach 32 mm 140 Chromium plated Brass handles 75mm with plate 125x32Each mm 120 Chromium plated Brass mortice latch and lock 100x65 mm with6 each 500 levers and a pair of brass lever handles Chromium plated brass casement window fastener each 90 Chromium plated Brass casement stays (straight peg type ) 300 mmweighing not less than 0.33 kg each 140 Chromium plated Brass casement stays (straight peg type ) 250 mm weighing not less than 0.28 kg each 120 Chromium plated Brass casement stays (straight peg type ) 200 mm weighing not less than 0.24 kg each 100 Chromium plated Brass Night latch each 500 Chromium plated Brass Wardrobe Knob 50 mm each 45 Chromium plated Brass screws 50 mm 100 Nos 230 Chromium plated Brass screws 40 mm 100 Nos 190 Chromium plated Brass screws 30 mm 100 Nos 150 Chromium plated Brass screws 25 mm 100 Nos 115 Chromium plated Brass screws 20 mm 100 Nos 100 Description of Materials Brass butt hinges (heavy type) :75x65x4.0 mm(.20)kg Brass parliamentary hinges 150x125x27x5 mm Brass parliamentary hinges 125x125x27x5 mm Brass parliamentary hinges 100x125x27x5 mm Brass parliamentary hinges75x100x20x3.2 mm Brass single acting spring hinges 150 mm Brass single acting spring hinges 125 mm Brass single acting spring hinges 100 mm Brass double acting spring hinges 150 mm Brass double acting spring hinges 125 mm Brass double acting spring hinges 100 mm Brass tower bolt (barrel type) 250x10 mm Brass tower bolt (barrel type) 200x10 mm Brass tower bolt (barrel type) 150x10 mm Brass tower bolt (barrel type) 100x10 mm Brass flush bolt 250 mm Brass flush bolt 150 mm Brass flush bolt 100 mm Brass handles 125 mm with plate 175x32 mm Brass handles 100 mm with plate 150x32 mm Brass handles75 mm with plate 125x32 mm Brass door latch 300x16x5 mm (0.380 kg) Brass door latch 250x16x5 mm (0.350 kg) Chromium plated Brass curtain rod 12 mm dia 1.25mm thick metre Chromium plated Brass curtain rod 20 mm dia 1.25mm thick metre 180 250
Code
592 594 595 596 597 608 635 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 660 661 662 663 664 665 666 667 668 669 670 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 696 697 698 699 700 701 702
Description of Materials Unit Chromium plated Brass curtain rod 25 mm dia 1.25mm thick metre
Rate 330
Bright finished or black enameled mild steel butt hinges 125x65x2.12 mm 130 10 Nos Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm 80 10 Nos Bright finished or black enameled mild steel butt hinges75x47x1.70 mm 10 Nos 60 Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm 10 Nos 45 Nickel plated mild steel piano hinges 1 mm thick 35 mm wide metre Bright finished or black enameled mild steel screws 50 mm Nos 100 Bright finished or black enameled mild steel screws 40 mm Nos 100 Bright finished or black enameled mild steel screws 30 mm Nos 100 Bright finished or black enameled mild steel screws 25 mm Nos 100 Bright finished or black enameled mild steel screws 20 mm Nos 100 Bright finished or black enameled mild steel bolts and nuts 50x6 mm each Oxidised mild steel butt hinges 125x65x2.12 mm 10 Nos Oxidised mild steel butt hinges 100x58x1.90 mm 10 Nos Oxidised mild steel butt hinges75x47x1.70 mm 10 Nos 35 60 50 40 30 25 5 130 80 55 45 320 300 225 190 105 100 80 110 105 85 40 90 80 45 40 40 35 25 20 17 15 14 120 100 75 70 50 45 35 30 550 510 500 480 490 475 450 390 155 125 700 580 450 360 280
Oxidised mild steel butt hinges50x37x1.50 mm 10 Nos Oxidised mild steel parliamentary hinges150x125x27x2.8 mm 10 Nos Oxidised mild steel parliamentary hinges 125x125x27x2.8 mm 10 Nos Oxidised mild steel parliamentary hinges 100x125x27x2.8 mm 10 Nos Oxidised mild steel parliamentary hinges 75x100x20x2.24 mm 10 Nos Oxidised mild steel single acting spring hinges 150 mm each Oxidised mild steel single acting spring hinges 125 mm each Oxidised mild steel single acting spring hinges 100 mm each Oxidised mild steel double acting spring hinges 150 mm each Oxidised mild steel double acting spring hinges 125 mm each Oxidised mild steel double acting spring hinges 100 mm each Nickel plated mild steel piano hinges 1 mm thick 35 mm wide metre Oxidised mild steel sliding door bolt 300x16 mm each Oxidised mild steel sliding door bolt 250x16 mm Oxidised mild steel door latch 300x20x6 mm Oxidised mild steel door latch 250x20x6 mm Oxidised mild steel tower bolt (barrel Oxidised mild steel tower bolt (barrel Oxidised mild steel tower bolt (barrel Oxidised mild steel tower bolt (barrel Oxidised mild steel handles 125 mm Oxidised mild steel handles 100 mm Oxidised mild steel handles75 mm type) 250x10 mm type) 200x10 mm type) 150x10 mm type) 100x10 mm each each each each each each each each each each
Oxidised mild steel hasps and staples(safety type) 150 mmNos 10 Oxidised mild steel hasps and staples(safety type) 115 mmNos 10 Oxidised mild steel hasps and staples(safety type)90 mm Nos 10 Oxidised mild steel screws 50 mm 100 Nos Oxidised mild steel screws 40 mm Oxidised mild steel screws 30 mm Oxidised mild steel screws 25 mm Oxidised mild steel screws 20 mm Anodised Aluminium butt hinges 125x75x4 mm Anodised Aluminium butt hinges 125x63x4 mm Anodised Aluminium butt hinges 100x75x4 mm Anodised Aluminium butt hinges 100x63x3.2 mm Anodised Aluminium butt hinges 100x63x4 mm Anodised Aluminium butt hinges 75x63x4 mm Anodised Aluminium butt hinges 75x63x3.2 mm Anodised Aluminium butt hinges 75x45x3.2 mm Anodised Aluminium sliding door bolt 300x16 mm Anodised Aluminium sliding door bolt 250x16 mm 100 Nos 100 Nos 100 Nos 100 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos each each
Anodised Aluminium tower bolt (barrel type)300x10 mm 10 Nos Anodised Aluminium tower bolt (barrel type)250x10 mm 10 Nos Anodised Aluminium tower bolt (barrel type)200x10 mm 10 Nos Anodised Aluminium tower bolt (barrel type)150x10 mm 10 Nos Anodised Aluminium tower bolt (barrel type)100x10 mm 10 Nos
Code
703 704 705 706 713 714 715 717 718 719 732 752 753 754 755 757 759 761 763 765 768 769 770 771 773 775 776 777 784 785 788 801 802 803 804 805 806 807 808 810 811 815 816 818 820 821 823 824 826 827 828 829 830 831 833 834 835 845 850 851 855 856 857 858 859 863 865 868 869 870 873 874
Description of Materials Unit Anodised Aluminium handles 125 mm with plate 175 x 3210 Nos mm Anodised Aluminium handles 100 mm with plate 150 x 3210 Nos mm Anodised Aluminium handles 75mm with plate 125 x 32 mm Nos 10 Anodised Aluminium kicking plate 50 cm long100x3.15 mm each
Rate 470 360 300 125
Block board construction flush door with teak wood ply on both faces 35 mm thick sqm 1600 Block board construction flush door with teak wood ply on both faces 30 mm thick sqm 1450 Block board construction flush door with teak wood ply on both faces: 25 mm thick sqm 1300 Block board construction flush door with commercial ply sqm on both faces :35 mm thick 1100 Block board construction flush door with commercial ply sqm on both faces : 30950 thick mm Block board construction flush door with commercial ply sqm on both faces:25 mm thick 850
Block board construction flush door lipping sqm Square vision panel in Block board construction flush door sqm Circular vision panel in Block board construction flush door Sqm Decorative type Louvers in Block board construction flush door sqm of Rebate cutting in Block board construction flush door sqm of Decorative plywood 4 mm sqm Fuel wood quintal Glue kilogram Hessian cloth sqm Cement Concrete Jali 50 mm thick sqm Cement Concrete Jali 40 mm thick sqm Cement Concrete Jali 25 mm thick sqm Kerosene oil litre Unslaked lime quintal Dehradun white lime quintal Satna lime quintal Dry hydrated lime (factory made) quintal Marble dust/ powder cum Marble chips up to 4mm and downsize White & black quintal Marble chips large size above 4 mm White & black quintal
280 110 170 290 80 400 450 65 20 210 180 145 30 300 410 230 220 1000 180 180
Moorum Mud (dry) Dry distemper Oil bound washable distemper/ Acrylic distemper Linseed oil (double boiled) Cement primer Distemper primer Pink primer (for wood)
cum cum kilogram kilogram litre litre litre litre
450 50 35 42 100 80 80 85 115 105 85 90 125 120 130 135 165 110 80 40 175 65 125 125 70 30 90 7 4 8 10 55
Aluminium paint litre Acid proof paint (chocolate or black) litre Anticorrosive bituminous paint (black) litre Black Japan litre Enamel paint litre Floor enamel paint in all shades except green litre Synthetic enamel paint in black or chocolate shade litre Synthetic enamel paint in all shades except black or chocolate shade litre Plastic emulsion paint litre Roofing paint for iron sheets in red colour litre White lead kilogram Water proofing cement paint kilogram Wax polish (ready made) kilogram Ordinary varnish litre Superior copal varnish litre Superior spar varnish litre Oil type wood preservative litre Putty for wood work Pig lead Premixed super white gypsum plaster. Plaster of Paris Plug Copper pins 6 mm dia 7.5 cm long Black colour dark shade pigment kilogram kilogram kg kilogram each each kilogram
Code
875 876 886 933 966 967 969 973 974 975 976 977 978 979 979A 980 982 983 992 994
Description of Materials
Unit
Rate
Red, chocolate, orange, buff or yellow (red oxide of iron) light shade pigment 70 kilogram Green or blue medium shade pigment kilogram 60 Standard holder bat clamps for sand cast iron or cast iron pipes 150 mm dia 25 each Sand Cast iron plain shoe 150 mm dia Copper plate each kilogram 325 270 30 1150 550
Pulley 25 mm dia each Rolling shutter made of 80x1.25 mm machine rolled lathssqm Top cover for rolling shutters metre
27.5 cm long wire spring grade no 2 for rolling shutters each 250 Ball bearing for rolling shutters each 330 Extra for mechanical devices chain and cranked operation for operating rolling shutters : exceeding 10.00 sq.m and up to 16.80 sq.m area of door sqm 520 Extra for mechanical devices chain and cranked operation for operating rolling shutters : exceeding 16.80 sq.m area of door sqm 550 Royalty for good earth cum 30 Cost of earth cum Royalty for sludge cum 90 Coarse sand (zone III) cum 1120 Fine sand (zone IV) cum 640 Galvanised steel plain sheets quintal 4750 Standard quality hard board sheet 3 mm thick sqm 110
996 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1013 1015 1019 1020 1021 1022 1023 1024 1025 1028 1029 1030 1031 1032 1034 1035 1036 1102 1143 1145 1149 1151 1154 1157 1158 1159
Standard quality hard board sheet 4.5 mm thick Shellac Spirit Spun yarn Mild steel round bar 12 mm dia and below Mild steel round bar above 12 mm dia Average rate of Mild steel round bars for reinforcements Twisted steel / deformed bars Mild steel square bars Structural steel such as tees, angles channels and R.S. Flats up to 10 mm in thickness Flats exceeding 10 mm in thickness Mild steel plates Mild steel sheets for tanks Mild steel expanded metal 20x60 mm strands Mild steel hooks Mild steel rivets
sqm kilogram litre kilogram quintal quintal quintal quintal quintal quintal joists quintal quintal quintal quintal sqm each quintal
130 205 65 40 4100 4000 4050 4500 4250 4250 4200 4150 4500 4600 270 30 4800
Hard drawn steel wire fabric sqm 430 Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots 10 Nos 20 Galvanised steel J or L hooks 8 mm dia 10 Nos 90 Galvanised steel bolts & nuts 10 mm dia and 125 mm long round head with slots each 10 Mild stel bolts 6 mm dia and 25 mm long with hexagonal head 10 Nos Straining bolts Galvanised steel barbed wire Galvanised steel turn buckles each quintal each 25 70 5175 15
Galvanised steel bolts & nuts 10 mm dia and 27 cm long both sides threaded with 4 galvanised steel nuts each Galvanised steel bolts 10 mm dia and 7 cm long with nuts each Bolts and nuts up to 300 mm in length quintal Bolts and nuts above 300 mm in length quintal Iron pintels including welded pin Steel beading Aluminium Plain Strip edging 38x12x3 mm Glass strip 4 mm thick40 mm deep Boundary stone top chisel dressed 15x15x90 cm Through and bond stone Stone for masonry work Stone for pitching 15 cm x 22.5 cm Stone dust each metre metre metre each 100 Nos cum cum cum
20 15 5400 5400 35 20 95 9 60 1100 375 420 925
Code
1160 1161 1163 1164 1165 1166 1168 1169 1174 1175 1177 1179 1182 1186 1187 1188 1189 1190 1194 1196 1197 1198 1199 1200 1201 1202 1203 1204 1207 1208 1209 1210 1211 1213 1214 1215 1216 1219 1220 1221 1222 1224 1225 1227 1228 1229 1231 1234 1235 1237 1238 1241 1301 1304 1305 1307 1309 1314 1315 1330 1331
Description of Materials Red sand stone block White sand stone block White sand stone slab 75 mm thick (un-dressed) Red sand stone slab 40 mm thick (un-dressed) White sand stone slab 40 mm thick (un-dressed) Red sand stone slab 30 mm thick (un-dressed) Kota stone slab 20 mm to 25 mm thick (semi-polished) Kota stone slab 25mm thick (rough chiseled)
Unit 10 cudm 10 cudm sqm sqm sqm sqm sqm Sq.m.
Rate 60 65 280 155 170 120 270 175 165 185 900 915
Red sand stone slab 45 mm and 50 mm thick (un-dressed) sqm White sand stone slab 45 mm and 50 mm thick (un-dressed) sqm Stone grit 6 mm and down size or pea sized gravel cum Crushed stone 2.36 mm to 12.5 mm size cum
Superior class teak wood such as Dandeli, Balarshah or Malabar in planks 10 cudm First class teak wood in scantling 10 cudm First class teak wood in planks 10 cudm Second class teak wood in scantling Second class teak wood in planks Second class deodar wood in planks First class kail wood in planks Second class kail wood in scantling Second class kail wood in planks Sal wood in scantling Precast terrazzo tiles 22 mm thick (light shade) Precast terrazzo tiles 22 mm thick(medium shade) Precast terrazzo tiles 22 mm thick (dark shade) G.I. Limpet washer Bitumen washer G.I. plain washer thick G.I. plain washer thin G.I. plain washer for seam bolts Water proofing materials Welding by gas plant Welding by electric plant Whiting Wire nails Wire mesh (rabbit) 20 mm dia holding down bolts Mild steel sheets with bolts and nuts to rest on pintels Hard drawn steel wire Mild steel flat strap fitting Chequered terrazzo tiles 22 mm thick(light shade) Chequered terrazzo tiles 22 mm thick(medium shade) Chequered terrazzo tiles 22 mm thick (dark shade) Extra for selected planks of second class teakwood Aluminium Plain Strip edging 57x12x3 mm 10 cudm 10 cudm 10 cudm 10 cudm 10 cudm 10 cudm 10 cudm sqm sqm sqm 100 Nos 100 Nos 100 Nos 100 Nos 100 Nos kilogram cm cm quintal kilogram sqm quintal each quintal quintal sqm sqm sqm 10 cudm metre
1050 700 800 640 720 480 300 250 250 500 240 220 200 35 25 32 30 32 25 1.5 1.5 400 52 45 5400 110 4200 3950 300 260 225 115 130
Diesel oil litre 41.29 Cutting marble or sand stone slab up to 50 mm thick by mechanical device metre 8 Extra for selected planks of first class teakwood Commercial LPG in cylinder. Bleaching powder Surface box for stop cock Surface box for sluice valve Surface box for water meter C.I. bracket for wash basin and sinks C.P.brass chain with 32 mm dia rubber plug C.P.brass chain with 40 mm dia rubber plug 10 cudm kg quintal each each each pair each each 140 51 1750 100 185 205 53 26 27 33 17
Clamps and M.S. stays including bolts and nuts for 100 mm pipe each M.S.Holder bat clamp of approved design for 100 mm S.C.I. pipe each
Code
1332 1334 1335 1336 1337 1339 1340 1342 1343 1350 1352 1353 1354 1355 1356 1357 1360 1361 1362 1363 1364 1366 1367 1369 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1392 1396 1397 1464 1466 1468 1470 1472 1532 1533 1534 1535 1540 1541 1542 1543 1545 1546 1547 1548 1549 1550
Description of Materials Unit M.S.Holder bat clamp of approved design for75 mm S.C.I. pipe each Clamps and M.S. stays including bolts and nuts for 50 mm pipe each Clamps and M.S. stays including bolts and nuts for 75 mm pipe each Clearing eye with chain and lid 100 mm dia each Clearing eye with chain and lid 150 mm dia Brass bib-cock 15 mm dia Brass bib-cock 20 mm dia Brass stop-cock 15 mm dia Brass stop-cock 20 mm dia Mosquito proof coupling of approved design each each each each each each
Rate 15 25 29 44 50 165 215 165 215 27 280 200 1415 980 4435 2210 115 145 205 90 15 25 30 15 11 14 15 17 22 32 40 45 67 84 106 118 290 650 90 3450 3550 5300 5600 335
C.I. cover and frame 300x300 mm inside each C.I.cover without frame 300x300mm inside i/c cover of each kg 4.50 Rectangular cover 455x610 mm with frame (low duty) each Rectangular cover 455x610mm without frame (low duty) 500 mm dia cover with frame (medium duty) 500 mm dia cover without frame (medium duty) C.I.mouth, brass ferrule 15 mm dia C.I.mouth, brass ferrule 20 mm dia C.I.mouth, brass ferrule 25 mm dia Vitreous china foot rests 250x130x30 mm C.I. grating 100x100 mm C.I. grating 150x150 mm C.I. grating 180x180 mm S.C.I. gully or nahani grating 100 mm dia Rubber insertions for80 mm dia pipe joints Rubber insertions for 100 mm dia pipe joints Rubber insertions for 125 mm dia pipe joints Rubber insertions for 150 mm dia Rubber insertions for 200 mm dia Rubber insertions for 250 mm dia Rubber insertions for 300 mm dia pipe joints pipe joints pipe joints pipe joints each each each each each each pair each each each each each each each each each each each each each each each each each each
Rubber insertions for 350 mm dia pipe joints Rubber insertions for 400 mm dia pipe joints Rubber insertions for 450 mm dia pipe joints Rubber insertions for 500 mm dia pipe joints Rubber insertions for 600 mm dia pipe joints Mirror of superior make glass 60x45 cm Vitreous china pedestal for wash basin
Pig lead kilogram S & S.C.I.standard specials up to 300 mm dia (heavy class) quintal S & S.C.I.standard specials over 300 mm dia (heavy class) quintal Flanged C.I. standard specials up to 300 mm dia(heavy class) quintal Flanged C.I. standard specials over 300 mm dia(heavy class) quintal Casing pipe 100 mm dia metre
Flush pipe with union spreaders and clamps all in C.P. brass for single stall 240 each Flush pipe with union spreaders and clamps all in C.P. brass for double stall each 380 Flush pipe with union spreaders and clamps all in C.P. brass for range of three stall each 490 Flush pipe with union spreaders and clamps all in C.P. brass for range of four stall each 570 Flush pipe and spreaders G.I.for single set of one squatting plate urinal each 70 1 Flush pipe and spreaders G.I.for range of two squatting plates urinal each 230 Flush pipe and spreaders G.I.for range of three squatting plates urinal each Flush pipe and spreaders G.I.for range of four squattingeach urinal plates G.I. pipes 15 mm dia metre G.I. pipes 20 mm dia G.I. pipes 25 mm dia G.I. pipes 32 mm dia G.I. pipes 40 mm dia G.I. pipes 50 mm dia metre metre metre metre metre 290 365 81 97 134 167 202 254
Code
1551 1552 1555 1559 1608 1612 1614 1616 1617 1618
Description of Materials G.I. pipes 65 mm dia G.I. pipes 80 mm dia G.I. back (jam) nuts25 mm dia G.I. back (jam) nuts65 mm dia G.I. tees (equal) 25 mm G.I. tees (equal) 65 mm
Unit metre metre each each each each
Rate 325 426 8 18 42 270
G.I. inlet connection each 61 S.C.I. soil, waste and vent single socketed pipe1.80 metres long:75mm dia 890 each S.C.I. soil, waste and vent single socketed pipe1.80 metres long: 100mm dia each 990 S.C.I. soil, waste and vent single socketed pipe1.80 metres long: 150mm dia each 1630
1620 1621 1622 1624 1625 1627 1628 1630 1631 1633 1634 1636 1637
S.C.I. plain bend75mm dia S.C.I. plain bend 100mm dia S.C.I. plain bend 150mm dia S.C.I. bend with access door 75mm dia S.C.I. bend with access door 100mm dia S.C.I. plain single equal junctions75x75x75 mm dia
each each each each each each
170 210 470 187 233 240 310 260 350 335 490 395 530
S.C.I. plain single equal junctions100x100x100 mm dia each S.C.I. single equal junctions75x75x75 mm dia with access door. each S.C.I. single equal junctions 100x100x100 mm dia with access door. each S.C.I. plain double equal junctions 75x75x75x75 mm dia each S.C.I. plain double equal junctions100x100x100x100 mmeach dia S.C.I. double equal junctions75x75x75x75 mm dia with access door. each S.C.I. double equal junctions 100x100x100x100 mm diaeach access door with
1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649
Slotted cowl (terminal guard )75 mm dia Slotted cowl (terminal guard ) 100 mm dia G.I. Union 15 mm nominal bore G.I. Union 20 mm nominal bore G.I. Union 25 mm nominal bore G.I. Union 32 mm nominal bore G.I. Union 40 mm nominal bore
each each each each each each each
137 187 40 60 70 100 135
G.I. Union 50 mm nominal bore each 180 G.I. Union 65 mm nominal bore each 390 G.I. Union 80mm nominal bore each 480 Polyethylene water storage tank with cover and suitableper litre arrangement locking 4.45
1653 1656 1659 1662 1666 1667 1669 1670
Sand cast iron S&S plain single unequal junctions : 100x100x75 mm dia each Sand cast iron S&S single unequal junctions: 100x100x75 mm dia with access door. each Sand cast iron S&S plain double unequal junctions : 100x100x75x75 mm dia each Sand cast iron S&S double unequal junctions: 100x100x75x75 mm dia with access door. each Sand cast iron heel rest bend75mm dia each Sand cast iron heel rest bend 100mm dia each S.C.I. single equal invert branch of required degree75x75x75 mm dia each S.C.I. single equal invert branch of required degree 100x100x100 mm dia each S.C.I. double equal invert branch of required degree 75x75x75x75 mm dia each S.C.I. double equal invert branch of required degree 100x100x100x100 mm dia each S.C.I. single unequal invert branch of required degree 100x100x75 mm dia each S.C.I. double unequal invert branch of required degree 100x100x75x75 mm dia each S.C.I. door pieces 75 mm dia each S.C.I. door pieces 100 mm dia each S.C.I. collar 75 mm dia each S.C.I. collar 100 mm dia each Unplasticised P.V.C. connection pipe with brass union 30 cm long 15 mm bore each Unplasticised P.V.C. connection pipe with brass union 30 cm long 20
350 390 510 550 200 239 290 387
1672 1673 1674 1677 1682 1683 1685 1686 1687 1688
382 510 466 545 253 350 98 133 26
Code
mm bore 1689 1690 1693 1700 1701 1702 1703 1704 1705 1706 1707 1709 1710 1711 1712 1713 1714 1715 1716 1717 1718 1719 1720 1721 1723 1724 1725 1726 1727 1854 1855 1856 1857 1858 1859 1863 1871 1872 1875 1876 1878 1879 1881 1882 1885 1889 1891 1893
Unit each
Rate 33
Unplasticised P.V.C. connection pipe with brass union 45 cm long 15 mm bore each Unplasticised P.V.C. connection pipe with brass union 45 cm long 20 mm bore each S.C.I. hand pump each R.C.C. pipes NP2 class 100 mm dia metre R.C.C. pipes NP2 class 150 mm dia metre R.C.C. pipes NP2 class 250 mm dia R.C.C. pipes NP2 class 300 mm dia R.C.C. pipes NP2 class 450 mm dia R.C.C. pipes NP2 class 500 mm dia R.C.C. pipes NP2 class 600 mm dia R.C.C. pipes NP2 class 700 mm dia R.C.C. pipes NP2 class 800 mm dia R.C.C. pipes NP2 class 900 mm dia R.C.C. pipes NP2 class 1000 mm dia R.C.C. pipes NP2 class 1100 mm dia R.C.C. pipes NP2 class 1200 mm dia R.C.C. collarsNP2 class 100 mm dia R.C.C. R.C.C. R.C.C. R.C.C. collarsNP2 class 150 mm dia collarsNP2 class 250 mm dia collarsNP2 class 300 mm dia collarsNP2 class 450 mm dia metre metre metre metre metre metre metre metre metre metre metre each each each each each each each each each each each each each each each each each each each each each each
33 43 550 135 154 188 261 380 454 732 995 960 1125 1420 1730 1760 20 25 40 49 75 89 109 121 172 210 256 283 330 36 53 91 130 190 1350 820 1525 310 293 40 55 40 495 170
R.C.C. collarsNP2 class 500 mm dia R.C.C. collarsNP2 class 600 mm dia R.C.C. collarsNP2 class 700 mm dia R.C.C. collarsNP2 class 800 mm dia R.C.C. collarsNP2 class 900 mm dia R.C.C. collarsNP2 class 1000 mm dia R.C.C. collarsNP2 class 1100 mm dia R.C.C. collarsNP2 class 1200 mm dia Stoneware pipes grade A (60 cm long) 100 mm dia Stoneware pipes grade A (60 cm long) 150 mm dia Stoneware pipes grade A (60 cm long) 200 mm dia Stoneware pipes grade A (60 cm long) 230 mm dia Stoneware pipes grade A (60 cm long) 250 mm dia Stoneware pipes grade A (60 cm long) 300 mm dia Fire clay kitchen sink: 600x450x250 mm White vitreous china laboratory sink450x300x150 mm White vitreous china laboratory sink600x450x200 mm
White plastic seat (solid)with lid C.P.brass hinges and rubber buffers each Black plastic seat (solid) with lid C.P.brass hinges and rubber buffers each Shower rose C.P.brass for 15 to 20 mm inlet 100 mm diaeach Shower rose C.P.brass for 15 to 20 mm inlet 150 mm diaeach Spun yarn kilogram Strainer brass 40 mm dia 1.5 metre long each 15 mm C.P.brass tap each
C.P.brass toilet paper holder of standard size each 115 C.I. trap for standard urinal with vent arm with operating and other couplings in C.P.brass: 50 mm dia each 158 C.I. trap for standard urinal with vent arm with operating and other couplings in C.P.brass: 80 mm dia each 200
1895 1896 1897 1898 1900 1902 1904 1913 1915
C.P.brass trap40 mm dia 100 mm S.C.I. trap with vent heel
each each
125 308 263 198 70 104 195 460 740
100 mm S.C.I. trap with 100 mm inlet and 100 mm outlet each 100 mm S.C.I. trap with 100 mm inlet and75 mm outlet each S.W. gully trap P type 100x100 mm each S.W. gully trap P type 150x100 mm S.W. gully trap P type 180x150 mm Vitreous china lipped front urinal Vitreous china squatting plate urinal each each each each
Code
1922 1923 1924 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1940 1941 1942 1943 1944 1945 1947 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965
Description of Materials H.P. or L.P. ball valve with polythene floats: 15 mm dia H.P. or L.P. ball valve with polythene floats: 20 mm dia H.P. or L.P. ball valve with polythene floats: 25 mm dia
Unit each each each
Rate 190 270 315 305 370 450 650 900 1550 310 400 510 780 1420 2030 2300 2600 3410 6550 9550 13500 675 580 405 55 62 340 750 680 10 11 13 13 14 15 27 29 35 1250
Brass full way valve with C.I. wheel (screwed end) 25 mm dia each Brass full way valve with C.I. wheel (screwed end) 32 mm dia each Brass full way valve with C.I. wheel (screwed end) 40 mm dia each Brass full way valve with C.I. wheel (screwed end) 50 mm dia each Brass full way valve with C.I. wheel (screwed end) 65 mm dia each Brass full way valve with C.I. wheel (screwed end) 80 mm dia each Gunmetal non-return valve-horizontal (screwed end) 25 mm dia each Gunmetal non-return valve-horizontal (screwed end) 32 mm dia each Gunmetal non-return valve-horizontal (screwed end) 40 mm dia each Gunmetal non-return valve-horizontal (screwed end) 50 mm dia each Gunmetal non-return valve-horizontal (screwed end) 65 mm dia each Gunmetal non-return valve-horizontal (screwed end) 80 mm dia each C.I.sluice valve (with caps) class I : 100 mm dia each C.I.sluice valve (with caps) class I : 125 mm dia each C.I.sluice valve (with caps) class I : 150 mm dia C.I.sluice valve (with caps) class I : 200 mm dia C.I.sluice valve (with caps) class I : 250 mm dia C.I.sluice valve (with caps) class I : 300 mm dia Vitreous china flat back wash basin 630x450 mm Vitreous china angle back wash basin 600x480 mm Vitreous china angle back wash basin 400x400 mm C.P. brass waste 32 mm C.P. brass waste 40 mm Vitreous china Indian type w.c. pan size 580 mm Vitreous china orrisa type w.c. pan size 580 mm Vitreous china pedestal type water closet Bolts and nuts 16 mm dia 60 mm long Bolts and nuts 16 mm dia 65 mm long Bolts and nuts 20 mm dia 65 mm long Bolts and nuts 20 mm dia 70 mm long Bolts and nuts 20 mm dia 75 mm long Bolts and nuts 20 mm dia 80 mm long each each each each each each each each each each each each each each each each each each
1970 1980 1984 1986 2200 2201 2202 2203 2204 2205 2206 2207 2208 2209 2211 2215 2216 2224 2225
Bolts and nuts 24 mm dia 85 mm long each Bolts and nuts 24 mm dia 90 mm long each Bolts and nuts 27 mm dia 100 mm long each White vitreous china dual purpose closet (Anglo Indian W.C.) suitable each for use as squatting pan or European type water closet as per manufacturers specifications Vitreous china foot rests 250x125x25 mm pair
100
Fly ash cum 7.75 Common burnt clay F.P.S.( non modular) bricks tile class1000 Nos 10 3100 designation Common burnt clay modular bricks class designation 12.5 000 Nos 1 3600 Carriage of Steam coal Carriage of Bricks Carriage of Coarse sand Carriage of Timber Carriage of Steel Carriage of Brick tiles Carriage of Lime Carriage of Cement Carriage of Tar bitumen Carriage of Soling stone & masonry stone Carriage of S.W. pipes100 mm dia Carriage of S.W. pipes150 mm dia tonne 1000 Nos cum cum tonne 1000 Nos cum tonne tonne cum 100 metre 100 metre 100.11 0 0 0 0 77.87 0 0 0 77.87 0 0 0 0 0
Carriage of Stone aggregate below 40 mm nominal size cum
Carriage of Stone aggregate 40 mm nominal size and above cum
Carriage of Stone blocks white & red sand stone & kota stone slab tonne
Code
2226 2228 2229 2241 2242 2247 2260 2261 2262 2264 2265 2266 2267 2268 2271 2273 2275 2281 2287 2290 2299 2302 2303 2308 2309 2311 2314 2317 2319 2320 2321 2322 2323 2324 2325 2326 2327 2328 2329 2330 2331 2332 2333 2334 2335 2341 2342 2343 2344 2345 2346 2347 2348 2349 2350 2351 2352 2353 2355 2356
Description of Materials Carriage of S.W. pipes200 mm dia Carriage of S.W. pipes250 mm dia Carriage of S.W. pipes300 mm dia Carriage of Good earth Carriage of Dump manure Carriage of Carriage of Brick aggregate Carriage of Fly ash Carriage of Rubbish Carriage of Moorum Carriage of Surkhi Carriage of Stone dust Carriage of Marble dust and marble chips Carriage of G.I. pipes below 100 mm dia Carriage of A.C.sheet and accessories Carriage of R.C.C. pipes 100 mm dia Carriage of R.C.C. pipes 150 mm dia Carriage of R.C.C. pipes 250 mm dia Carriage of R.C.C. pipes 300 mm dia Carriage of R.C.C. pipes 450 & 500 mm dia Carriage of G.I.sheet and accessories Carriage of R.C.C. pipes 600, 700, 750 & 800 mm dia Carriage of Plaster of paris Carriage of Cast iron fittings Carriage of Red bajri Carriage of Barbed wire Carriage of Sludge Carriage of Spun iron S & S pipes 100 mm dia Carriage of Spun iron S & S pipes 125 mm dia Carriage of Spun iron S & S pipes 150 mm dia Carriage of Spun iron S & S pipes 200 mm dia Carriage of Spun iron S & S pipes 250 mm dia Carriage of Spun iron S & S pipes 300 mm dia Carriage of Spun iron S & S pipes 350 mm dia Carriage of Spun iron S & S pipes 400 mm dia Carriage of Spun iron S & S pipes 450 mm dia Carriage of Spun iron S & S pipes 500 mm dia Carriage of Spun iron S & S pipes 600mm dia Carriage of C.I. pipes 500 mm dia Carriage of R.C.C. pipes 900 mm dia Carriage of R.C.C. pipes 1000 mm dia Carriage of R.C.C. pipes 1100 mm dia Carriage of R.C.C. pipes 1200 mm dia Carriage of Jamuna sand Carriage of Pig lead Carriage of Solvent/ Diesel. Carriage of Ductile iron pipes (k7) 100 mm dia Carriage of Cast iron pipes 150 mm dia Carriage of Cast iron pipes 200 mm dia Carriage of Cast iron pipes 250 mm dia Carriage of Cast iron pipes 300 mm dia Carriage of Cast iron pipes 350 mm dia Carriage of Cast iron pipes 400 mm dia Carriage of Cast iron pipes 450 mm dia Carriage of Cast iron pipes 500 mm dia Carriage of Cast iron pipes 600 mm dia Carriage of Cast iron pipes 700 mm dia Carriage of Cast iron pipes 800 mm dia Carriage of Cast iron pipes 900 mm dia
Unit 100 metre 100 metre 100 metre cum cum cum cum cum cum cum cum cum tonne tonne 100 metre 100 metre 100 metre 100 metre 100 metre tonne 100 metre tonne tonne cum tonne cum 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre cum tonne quintal 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre
Rate 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna sand) cum
Code
2357 9998
Description of Materials Carriage of Cast iron pipes 1000 mm dia Carriage of sundries (Carriage)
Unit 100 metre L.S.
Rate 0 1.49
2391 2392 2393 2394 2395 2396 2397 2398 2406 2407 2408 2412 2413 2414 2447 2449 2451 2452 2453
Strips-Aluminium fluted 3.15mm thick and 150mm widemetre Strips Aluminium fluted 3.15mm thick and 200mm wide Metre metre
228 323
Float glass sheet of nominal thickness 4 mm (weight not less than 10kg/sqm). sqm 310 Float glass sheet of nominal thickness 5.5 mm.(weight not less than 13.50 450 sqm kg/sqm). Float glass sheet of nominal thickness 6.5 mm.(weight not less than sqm 500 Ply wood 5 ply with commercial ply on both faces 6 mm thick sqm 340
Hollock ballies 125 mm diameter
metre
35
Oxidised mild steel pull bolt lock (locking bolt) of size 85 mm x 42 mm with screws, bolts, nuts and washers complete each 44 Brass cupboard lock 6 levers (best make of approved quality) 40 mm size each 65 Brass cupboard lock 6 levers (best make of approved quality) 50 mm size each 70 Brass cupboard lock 6 levers (best make of approved quality) 65 mm size each 75 Brass cupboard lock 6 levers (best make of approved quality) 75 mm size each Brass hanging type door stopper 150 mm each
2454
95 60
2455 2456 2459 2464 2465 2466 2467 2468 2469 2470 2471 2480 2481 2483 2500 2504 2505 2506 2507 2508 2509 2510 2602 2603 2704 2708 2709 2710 2750 2751 2901 2902 2903 2904 2908 2909
each Hydraulic door closer bottle type M.S. body with necessary accessories and screws535 complete Anodised Aluminium hanging type door stopper each 21 Anodised Aluminium pull bolt lock (locking bolt) of size 85 mmx42mm with screws, bolts ,nuts and washers complete each 46 Anodised Aluminium Casement stay 250 mm each 46 Hollock wood in scantling 10 cudm 310 Chromium plated Brass pull bolt lock (locking bolt) of sizeeach 85 mmx42mm with screws, bolts, nuts and washers complete 145 Nickeled Chromium Brass cupboard lock 40 mm size Nickeled Chromium Brass cupboard lock 50 mm size Nickeled Chromium Brass cupboard lock 65 mm size Nickeled Chromium Brass cupboard lock 75 mm size Ply wood 5 ply with teak ply on both faces 9 mm thick each each each each sqm 62 70 82 103 960
Ply wood 5 ply with teak ply on one face and commercial ply on another face 9 mm thick sqm Ply wood 7 ply with teak ply on one face and commercial ply on another face 9 mm thick sqm Extra for selected planks of second class deodar wood 10 cudm Kiln seasoning of timber cum Hollock wood in planks 10 cudm
775 845 73 680 350
F.P.S. bricks class designation75 F.P.S. bricks class designation50 Aluminium Strip 40 mm wide and 2 mm thick
1000 Nos 1000 Nos kilogram
2900 2450 210
White marble makrana second quality plain veined stone quintal for crazy flooring pieces 130 8 mm thick granite stone tiles (mirror polished of all shades) sqm 8 mm thick marble tiles (polished) Raj Nagar sqm Stone Aggregate (Single size) : 100 mm nominal size cum Stone Aggregate (Single size) : 80 mm nominal size Stone chippings/ screenings 4.75 mm nominal size Stone chippings/ screenings 150 micron nominal size cum cum cum 675 340 750 750 1150 1150 330 360
Over burnt (Jhama) Brick Aggregate: 120 mm to 40 mm cum size Over burnt (Jhama) Brick Aggregate: 90 mm to 40 mm size cum
Code
2910 2911 2911A 2914 2916 3002 3004 3050 3050A 3080 3084 3088 3092 3096 3213 3228 3229 3300 3311 3314 3317 3320 3321 3326 3327 3617 3620 3621 3624 3625
Description of Materials Unit Stone chippings/ screenings 12.5/ 13.2 mm nominal sizecum Stone chippings/ screenings 10/ 11.2 mm nominal size cum Marble Stone chippings/ screenings 10/ 11.2 mm nominal size cum Solvent Paving Asphalt 80/100 penetration Polyvinyl chloride sheet 400 micron thick kilogram tonne sqm
Rate 1050 1050 9000 23 37500 31 33 5075 800 320 490 680 930 1650
Stone ware spouts 100 mm dia 60 cm long each Galvanised steel corrugated sheets quintal CRIL 0.50mm thick poly coated sheet quintal Gunmetal non-return valve-horizontal (screwed end) 25 mm dia each Gunmetal non-return valve-horizontal (screwed end) 32 mm dia each Gunmetal non-return valve-horizontal (screwed end) 40 mm dia each Gunmetal non-return valve-horizontal (screwed end) 50 mm dia each Gunmetal non-return valve-horizontal (screwed end) 65 mm dia each
Vitreous china Surgeon type wash basin of size 660x460 each mm 995 600x120 mm glass shelf with anodised aluminium angle frame, C.P.brass brackets and guard rail of standard size each 130 Vitreous china flat back wash basin 550x400 mm each Gunmetal non-return valve-horizontal (screwed end) 80 mm dia each C.I.sluice valve (with caps) class II : 100 mm dia C.I.sluice valve (with caps) class II : 125 mm dia C.I.sluice valve (with caps) class II : 150 mm dia C.I.sluice valve (with caps) class II : 200 mm dia C.I.sluice valve (with caps) class II : 250 mm dia C.I.sluice valve (with caps) class II : 300 mm dia C.P. Brass union 40 mm dia each each each each each each each 530 2630 2650 3200 4000 9100 13500 17000 175
C.C.I.(spun) socketed soil, waste and vent pipe 1.80 metres long:100mm 1130 each dia C.C.I.(spun) socketed soil, waste and vent pipe 1.80 metres long:75mm dia985 each S.C.I. S&S bends with access door100mm dia S.C.I. S&S bends with access door75mm dia each each 270 215
3628 3629 3634 3635 3640 3641 3644 3645 3650 3651
S.C.I. S&S bend100mm dia S.C.I. S&S bend75mm dia S.C.I. S&S heel rest sanitary bend 100mm dia S.C.I. S&S heel rest sanitary bend 75mm dia S.C.I. S&S single equal junctions100x100x100 mm
each each each each each
235 175 275 240 430 310 465 350 565 450
S.C.I. S&S single equal junctions75x75x75 mm each S.C.I. S&S single equal junctions with access door 100x100x100 mm each S.C.I. S&S single equal junctions with access door 75x75x75 mm each S.C.I. S&S double equal junctions100x100x100x100 mmeach S.C.I. S&S double equal junctions75x75x75x75 mm each
3654 3655 3660 3664 3670 3674 3681 3682 3685 3686 3690 3695
S.C.I. S&S double equal junctions with access door 100x100x100x100 mm. each 610 S.C.I. S&S double equal junctions with access door 75x75x75x75 mm each 475 S.C.I. S&S single unequal junctions100x100x75 mm each 560 S.C.I. S&S single unequal junctions with access door each 630 S.C.I. S&S double unequal junctions100x100x75x75 mm 100x100x75 mm780 each S.C.I. S&S double unequal junctions with access door 100x100x75x75 mm 850 each S.C.I. S&S single equal invert branch of required degree 100x100x100 mm dia each 395 S.C.I. S&S single equal invert branch of required degree 75x75x75 mm dia each 303 S.C.I. S&S double equal invert branch of required degree100x100x100x100 mm dia each 525 S.C.I. S&S double equal invert branch of required degree 75x75x75x75 mm dia each 405 S.C.I. S&S single unequal invert branch of required degree100x100x75 mm dia each 505 S.C.I. S&S double unequal invert branch of required degree100x100x75x75 mm dia each 700
Code
3699 3707 3708 3712 3713 3716 3717 3728 3729 3733 3734 3738 3739 3746 3747 3749 3860 3861 4001 4002 4006 4007 4008 4009 4010 4011 4012 4013 4014 4014 4201 4202 4203 4204 4205 4206 4207 5114 5001 6001 6001A 6007 6010 6019 6115 6302 6501 6501A 7001 7003 7004 7005 7006 7006A 7008 7009 7010 7011 7012 7013 7014 7015 7016 7017 7018 7019 7020 7021
Description of Materials S.C.I. S&S, 75 mm offset for75 mm dia pipe S.C.I. S&S, 150 mm offset for75 mm dia pipe S.C.I. S&S, 150 mm offset for100 mm dia pipe S.C.I. S&S, 114 mm offset for75 mm dia pipe S.C.I. S&S, 114 mm offset for100 mm dia pipe S.C.I. S&S, 152 mm offset for75 mm dia pipe S.C.I. S&S, 152 mm offset for100 mm dia pipe S.C.I S&S door pieces 100 mm dia S.C.I S&S door pieces 75 mm dia S.C.I S&S, Slotted Cowl (Terminal Guard) 100 mm S.C.I S&S, Slotted Cowl (Terminal Guard) 75 mm S.C.I S&S, collars 100 mm S.C.I S&S, collars 75 mm S.C.I. S&S, 76 mm offset for75 mm dia pipe S.C.I. S&S, 76 mm offset for100 mm dia pipe Vitreous china toilet paper holder of standard size 560 mm dia cover with frame (Heavy duty) 560 mm dia cover without frame (Heavy duty)
Unit each each each each each each each each each each each each each each each each each each
Rate 215 270 270 270 355 335 440 370 260 190 175 185 130 215 246 118 8460 4500
Pressed steel door frames (mild steel sheet 1.25mm) Profile B metre Pressed steel door frames (mild steel sheet 1.25mm) Profile C metre Pressed steel door frames (mild steel sheet 1.25mm) Profile E metre Mild steel tubes hot finished welded type kilogram Mild steel tubes hot finished seamless type kilogram Mild steel tubes electric resistant or induction butt welded kilogram Circular C.I. Box for ceiling fan each Pulley 40 mm dia each
220 240 270 48 58 65 50 25
Ready made steel door with necessary hinges, lugs and glazing clips excluding other fittings & their fixing sqm Ready made steel door with necessary hinges, lugs and glazing clips excluding other fittings & their fixing kg Aluminium primer litre 72 Red oxide Zinc chromate primer litre 68 Copper acetate kilogram 270 Hydrochloric acid kilogram 32 Copper chloride kilogram 272 Copper nitrate kilogram 200 Ammonium chloride kilogram 15 Mobil oil litre White marble slab Makrana second quality plain veined 18 mm thick sqm Granite stone 18 mm thick mirror polished marble slab sqm Pink marble slab plain 18mm thick sqm Udaypur green marble slab plain 18mm thick sqm Black Zebra marble slab plain 18mm thick sqm 186 1850 1900 610 660 470
River Sand cum 500 Sand zone V cum 350 Brass 100mm mortice latch and lock with6 levers without each of handles 250 pair Pair of Anodised Aluminium lever handles for 100mm mortice latch and lock each 300 Vitreous china flat back wash basin 450x300 mm each 425 Vitreous china 10 litres low level cistern without fittings each 890 Vitreous china 10 litres low level cistern with fittings each 1550 C.P. flush valve each 3000 3000 F.P.S. clay fly ash bricks class designation 75 1000 Nos Gypsum board sqm 160 Ceiling sections Perimeter channel Intermediate channel Ceiling angle Connecting clips Soffit cleat Joint filler Joint finisher Joint tape roll Dash fastener/ Chemical fastener All drive screws ( for gypsum board) Primer ( for gypsum board) metre metre metre metre each each kilogram kilogram roll each 100 Nos litre 39 27 42 19 6.2 4 22 24 140 13 56 85
Code
7022 7023 7024 7027 7028 7029 7030 7031 7032 7033 7034 7035 7036 7040 7042 7043 7044 7045 7046 7047 7048 7049 7050 7051 7052 7053 7055 7056 7059 7060 7063 7064 7065 7068 7070 7071 7072 7073 7074 7075 7076 7077 7087 7090 7091 7095 7096 7097 7098
Description of Materials Chlorpyriphos 20% E.C. / Lindane 20% E.C. Chromium plated brackets ( curtain rods) Acid Proof cement M.S. Butt hinges 125x90x4 mm
Unit litre each tonne 10 Nos
Rate 160 7 8100 105
Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia. of wire 0.63 mm sqm 230 Frosted glass sheet of nominal thickness 4 mm (weighing not less than 10 sqm Nickel plated M.S. pipe 25 mm dia. Nickel plated M.S. pipe 20 mm dia. metre Nickel plated M.S. Brackets for curtain rod 20 mm each Nickel plated M.S. Brackets for curtain rod 25 mm each Oxidised mild steel screws 35 mm 100 Nos Mild steel conduit pipe (heavy type) ISI marked-20 mm dia. metre Mild steel conduit pipe (heavy type) ISI marked-25 mm dia. metre Rolling shutters of 80x0.90 mm laths sqm Rolling shutters of 80x1.2 mm laths sqm Top cover of Rolling shutters 0.90 mm thick metre Top cover of Rolling shutters 1.20 mm thick metre Rawl plug 50 mm (designation 10 no.) each Teak wood lipping of size 25x3 mm in pelmets metre kg/sqm) 315 75 67 6 7 40
57 66 930 1010 270 305 10.0 20
Flat pressed 3 layer and graded particle board (medium density) Grade 1 conforming to IS : 3087 - 18 mm thick sqm 390 Aluminium tee channel (heavy duty) with rollers and stop metre end Aluminium hanging floor door stopper with twin rubber & stopper each Hydraulic door closer tubular type Aluminium section body each 45 58 810
Oxidised M.S.casement stay (straight peg type) 300 mm each not less than 0.33 kg 21 Oxidised M.S.casement stay (straight peg type) 250 mm each not less than 0.28 kg 18 Oxidised M.S.casement stay (straight peg type) 200 mm each not less than 0.24 kg 17 Extra for providing grilled rolling shutters with 8 mm dia M.S. rod sqm 225 Chequered precast cement concrete tiles 22mm thick using marble chips of size 6mm - Light shade using white Cement. sqm 470 White marble Raj Nagar plain 20 mm thick (slab area 0.10 sqm to 0.20 sqm) sqm 545
Acid and alkali resistant tiles 300x300 mm size, 10 mm thick 10 Nos 520 S.C.I. Tee 150 mm each 505 Expanded polystyrene type N- Normal sqm 130 Expanded polystyrene type - SE sqm 155 Stainless steel kitchen sink - with drain board bowl depth eachmm. 250 5150 Stainless steel kitchen sink - with drain board 510 x 1040mm bowl depth 225 mm. each 4900 Stainless steel kitchen sink - with drain board 510 x 1040mm bowl depth 200 mm. each 4200 Stainless steel kitchen sink - with drain board 510x1040mm bowldepth 178 mm each 2900 Stainless steel kitchen sink - without drain board 610x510mm bowl depth 200 mm. each 2950 Stainless steel kitchen sink - without drain board 610x460mm bowl depth 200 mm. each 2750 Stainless steel kitchen sink - without drain board 470x420mm bowl depth 178 mm each 2050 Coloured Orissa pattern W.C. pan 580x440 mm each Coloured Pedestal type W.C. pan 580x440 mm (European type) each Coloured Vitreous china 10 lit. low level cistern each Coloured (other than black) solid P.V.C. seat in European W.C. pan each 1275 1080 1500 475
7101 7102 7103 7104 7105 7106 7107 7112 7113 7114 7115 7116 7117 7118 7119 7120 7123 7123A
Circular shape 450 mm dia Mirror with Plastic moulded frame each 390 Rectangular shape 453x357 mm Mirror with Plastic moulded frame each 260 Oval shape 450x350 mm (outer dimensions) Mirror with each moulded frame Plastic 300 Rectangular shape 1500x450 mm Mirror with Plastic moulded frame each 670 Hard board 6 mm thick sqm 170 Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings each 21 Semi Rigid PVC waste pipe for sink and wash basin 40 mm dia with mm dia with length not less than 700 mm i/c PVC waste fittings each 27 Flexible (coil shaped) PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings each 26 Flexible (coil shaped) PVC waste pipe for sink and wash basin 40 mm dia with length not less than 700 mm i/c PVC waste fittings each 28 Coloured High density polyethylene/ poly propylene 10 lit. (full flush) capacity controlled low level flushing cistern with fittings each 685 High Density Poly Ethyline (HDPE) pipe metre 50
Code
7126 7127 7128 7129 7130 7131 7132 7133 7134 7135 7136 7137
Unit
Rate
White Vitreous china 10 lit. (full flush) capacity controlled each low level flushing cistern with all fittings 975 Coloured Vitreous china 10 lit. (full flush) capacity controlled low level flushing cistern with all fittings each 1400 S.W. intercepting trap 100 mm dia each 170 S.W. intercepting trap 150 mm dia each 225 Rectangular shape 600x450 mm precast R.C.C. manholeeach with frame -690 - 25 cover L.D. Square shape 350x350 mm precast R.C.C. manhole cover with frame - L.D.600 each - 25 Circular shape 450 mm dia precast R.C.C. manhole cover with frame each 560 Rectangular shape 500x500 mm precast R.C.C. manhole cover with frame - M.D. - 10 each 660 Circular shape 500 mm dia precast R.C.C. manhole cover with frame - M.D. - 10 each 630 Circular shape 560 mm dia precast R.C.C. manhole cover with frame - H.D. - 20 each 1030 Circular shape 560 mm dia precast R.C.C. manhole cover with frame - E.H.D. - 35 each 1150 Factory made 35 mm thick shutters with laminated veneer lumber styles rails as per TADS IS:1995 and panels of 12 mm thick plain type-I, medium density flat pressed three layer, graded particle board (FPT-I) as per IS:3087-1985 bonded with BWP type synthetic resin adhesive, as per IS:848-1974 sqm 1780 Factory made 35 mm thick shutters with laminated veneer lumber styles rails as per TADS IS:1995 and panels of 12 mm thick both sides prelaminated type-I, medium density flat pressed three layer, graded particle board (FPT-I) as per IS:3087-1985 bonded with BWP type synthetic resin adhesive, as per IS:848-1974 sqm Factory made 35 mm thick shutters with laminated veneer lumber styles rails as per TADS IS:1995 and panels of 12 mm thick one side prelaminated type-I, and other side balancing lamination, medium density flat pressed three layer, graded particle board (FPT-I) as per IS:3087-1985 bonded with BWP type synthetic resin adhesive, as per IS:848-1974 sqm Factory made 30 mm thick shutters with laminated veneer lumber styles rails as per TADS IS:1995 and panels of sheet glass using 10 kg/ sqm glass panes sqm Factory made 35 mm thick shutters with laminated veneer lumber styles rails as per TADS IS:1995 and panels of galvanised wire gauge with average width of aperture 1.4 mm on both directions with wire of dia 0.63 mm sqm Factory made 30 mm thick shutters with laminated veneer lumber styles rails as per TADS IS:1995 and panels of galvanised wire gauge with average width of aperture 1.4 mm on both directions with wire of dia 0.63 mm sqm Laminated veneer lumber confirming to TADSS IS:1995 manufactured in factory in frames of doors, windows 10 cudm
7139
1930
7143
1850
7151
1580
7154
1630
7155
1385 665
7157 7178 7181 7182 7183 7184 7187 7188 7189 7190 7191 7192 7193 7194 7195 7196 7197 7198 7199 7208 7209 7212 7213 7214 7215 7231 7232 7233 7236
C.I. pile shoe kilogram 46 M.S. clamps for pile shoe kilogram 42 Bentonite tonne 3100 Oxidised M.S. safety chain (weighing not less than 450 gms) for door each 60 C.I. grating 150 mm dia. (Weighing not less than 440 gm) each 22 U-PVC pipes (working pressure 4 kg / cm2) Single socketed pipe 75 mm dia.67 metre U-PVC pipes (working pressure 4 kg / cm2) Single socketed pipe 110 mm dia. metre 129 U-PVC pipes (working pressure 4 kg / cm2) Rubber (Seal) Ring 75 mm dia. 16 metre U-PVC pipes (working pressure 4 kg / cm2) Rubber (Seal) Ring 110 mm dia. 20 metre UPVC coupler for UPVC drainage pipes 75 mm each 34 UPVC coupler for UPVC drainage pipes 110 mm each 52 UPVC pushfit coupler (single) 75 mm thick each 50 UPVC pushfit coupler (single) 110 mm thick UPVC single equal Tee (with door) 75x75x75 mm UPVC single equal Tee (with door) 110x110x110 mm UPVC single equal Tee (with door) 75x75x75 mm UPVC single equal Tee (with door) 110x110x110 mm UPVC bend 87.5o 75 mm bend UPVC bend 87.5o 110 mm bend UPVC plain shoe 75 mm bend UPVC plain shoe 110 mm bend UPVC pipe clip 75 mm bend UPVC pipe clip 110 mm bend Resin Bonded Glass wool 16 kg/m 50 mm thick Resin Bonded Glass wool 24 kg/m 50 mm thick Fibre glass tissue reinforcement Type II Grade I each each each each each each each each each each each sqm sqm sqm 81 95 128 115 180 56 95 107 207 16 31 145 204 65
Precast chequered cement tiles 22 mm thick Dark shadesqm ordinary cement using 230
Code
7237 7239 7240 7241 7244 7245 7246
Rate Description of Materials Unit Precast chequered cement tiles 22 mm thick Medium shade using 50% White cement & 50% Ordinary cement sqm 360 Epoxy paint Fire retardant paint Melamine polish litre litre litre 315 350 250
7247
7248
7249
Table rubbed polished stone 18 mm thick (75x50cm) Agaria Marble stone - 18 mm thick sqm Table rubbed polished stone 18mm thick (75x50cm) Granite stone - 18mm thick sqm Vertical load testing (INITIAL) of piles in accordance with IS : 2911 (Part-IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification and up to 50MT capacity pile. per test Vertical load testing (INITIAL) of piles in accordance with IS : 2911 (Part-IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & above 50MT and up to 100MT. per test Vertical load testing (INITIAL) of piles in accordance with IS : 2911 (Part-IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & group of two or more up to 50MT. per test Cyclic vertical load testing of piles in accordance with IS : 2911 (Part-IV) including preparation of pile head etc. for Single pile up to 50 tonne capacity per test
1630 1825
33200
40300
48500
15000
7250
7251
7252
7253
7254 7255 7256 7257 7258 7259 7260 7261 7266 7267 7268 7269 7270 7271 7272 7280 7281 7295 7297 7306 7307 7309 7312 7313 7314 7315 7318 7319 7320 7321 7322
Cyclic vertical load testing of piles in accordance with IS : 2911 (Part-IV) including preparation of pile head etc. for Single pile above 50 tonne capacity pile and up to 100 tonne capacity pile per test Cyclic vertical load testing of piles in accordance with IS : 2911 (PartIV) including preparation of pile head etc. for Group of two piles up to 50 tonne capacity each per test Lateral load testing of single pile in accordance with IS : 2911 part -IV for determining safe allowable lateral load on pile. Up to 50 tonne capacity per test Lateral load testing of single pile in accordance with IS : 2911 part -IV for determining safe allowable lateral load on pile. Above 50 tonne capacity per test Hardening Compound litre Road marking paint (spirit based) litre Superior quality road marking paint litre C.P. Brass bibcock 15 mm each C.P. Brass long nose bibcock 15 mm each C.P. Brass long body bibcock 15 mm each C.P. Brass stop cock (concealed) 15 mm each C.P. Brass angle valve 15 mm each
23000
29500
15000
23500 37 120 170 325 330 350 350 370
Pressed clay tiles 1000 Nos 12150 Plain ceiling tiles (BWP type phenol formaldehyde synthetic resin bonded)120 each (600x600x12 mm) Semi perforated ceiling tiles (600x600x12 mm) 25 mm thick particle board each sqm 120 460 850 39 870
30 mm thick prelaminated flush door shutter sqm IInd class teak wood lipping 25 mm wide x 12 mm thick metre 25 mm thick melamine faced prelaminated three layer particle board sqm
Granite Black marble, 18 mm thick slab, above 0.2 sqm up to 0.5 sqm (areawise) sqm 1550 Granite Black marble, 18 mm thick slab, above 1.0 sqm up to 2.0 sqm (areawise) sqm 1640 Aluminium T or L sections kilogram 220 For flush door shutters Extra for providing teak veneeringsqm on one side instead of commercial veneering 320 Paving Asphalt 60/70 penetration tonne 38500 8 9 12 14 36 1050 38 50 62
Expandable fastener with plastic sleeve and M.S. screws. 25 mm long each Expandable fastener with plastic sleeve and M.S. screws. 32 mm long each Expandable fastener with plastic sleeve and M.S. screws. 40 mm long each Expandable fastener with plastic sleeve and M.S. screws. 50 mm long each Plasticizer / super plasticizer Wall form panel 1250x500 mm Tie bolt 12 mm dia 100 mm length Tie bolt 12 mm dia 150 mm length Tie bolt 20 mm dia 150 mm length kilogram each each each each
Code
7323 7324 7325 7326 7327 7328 7329 7330 7331 7332 7333 7334 7335 7338 7339 7340 7342 7343 7344 7345 7346 7347 7348 7349 7354 7358 7359 7361 7363 7364 7366 7367 7369 7375 7376 7377 7378 7379 7380 7381 7382 7385 7386 7387 7388 7389 7390 7391 7392 7393 7394 7395 7396 7397 7398 7399 7400 7401 7402 7403 7405 7406 7407 7408 7409 7410 7411 7412 7415 7416
Description of Materials Tie bolt 20 mm dia 225 mm length Spring coil 12 mm Plastic cone 12 mm dia Corner angle 45x45x5 mm 1.50 m long 100 mm channel shoulder 2.5 m long Double clip ( bridge clip) Single clip M.S. tube 40 mm dia Wall form panel 1250x450 mm Corner angle 45x45x5 m 2.50 m long Column clamp 450x1070 m Prop 2 m ( 2-3.5m) Binding wire Gun metal cramp Stainless steel cramp Stainless steel pin .
Unit each each each each each each each metre each each each each kilogram kilogram kilogram kg
Rate 80 16 18 300 1160 97 77 280 1040 340 1220 830 53 305 320 180 1825 1150 422 1170 55 28 10 14 110
Adjustable span ESO+SI (2.35-3.40) each Adjustable telescopic prop 3 m (2.02-3.75 m) each Beam clamp 300-380 mm (450-1070 mm) each set Prop 4 m each Double coupler each Cadmium plated full threaded steel screws (30x4 mm dia.) Nos 100 Aluminium washer 2 mm thick 15 mm dia 100 Nos 12 mm M.S. U beading metre Plastic encapsulated M.S. foot rest 30x20x15 cm each
each Flushing Cistern P.V.C. 10 lts capacity ( low level ) (White) ( with fittings, accessories and flush640 pipe) P.V.C. automatic flushing cistern 5 lts capacity P.V.C. automatic flushing cistern 10 lts capacity 15 mm C.P. brass tap with elbow operation lever White glazed fire clay draining board 600x450x25 mm Glass reinforced Gyp sum ( GRG) board 8.5 mm thick each each each each sqm 490 530 600 525 230
Galvanised M.S. sheet 0.5 mm thick pressed channel section of size 50x32 mm metre 60 Galvanised M.S. sheet 0.50 mm thick pressed stud. 48x34x36 mm metre 72 G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Single lipped urinal each 440 G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Range of two lipped urinals each 1010 G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Range of three lipped urinals each 1240 each G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Range of four lipped urinals 1800 White vitreous china clay half stall urinal flat back 580x380x350 mm or angle back 450x375x350 mm with waste fittings as per IS : 2556 each 1440 Precast R.C.C. grating with frame 500x450 mm horizontal grating each 650 Precast R.C.C. grating with frame 450x100 mm vertical grating each 305 Bitumen emulsion rapid setting (R.S.) confirming to IS : 8887-1995 tonne 27700 3 mm thick translucent white acrylic plastic sheet sqm 570 12 thick particle board ceiling tile sqm 260 Spigot for standerd jointing kilogram 45 Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia bolt each 48 Anodising 15 microns on aluminium sections kilogram 40 Neoprene/EPDM rubber gasket metre 25 Anodising 25 microns on aluminium sections kilogram 50 Powder coating 50 microns on aluminium sections. kilogram 64 Polyester powder coating 50 microns on aluminium sections kilogram 70 Double action hydraulic floor spring with stainless steel cover plate each 1525 6 mm dia. G.I. adjustable hangers including clips (up to 1.2 m length) each 28 Double action hydraulic floor spring with brass cover plateach e 1675 Base Jack each 180 Challies each 800 Cup Locks each 75 15 mm PTMT bib cock each 100 15 mm PTMT bib cock with flange (fancy) each 140 15 mm PTMT bib cock long body with flange each 160 15 mm dia PTMT stop cock(male thread) each 100 20 mm dia. PTMT stop cock each 130 PTMT pillar cock each 160 PTMT push cock 15 mm dia. each 90 PTMT push cock 12 mm dia. 20 mm BSP each 80 PTMT grating 100 mm dia. each 31 PTMP. Pillar cock (fancy) 15mm foam flow each 225 125 mm grating with waste hole each 37 Rectangular type with openable circular lid 150 mm size 18 mm high with 100 mm dia. (110 gm) each 101 Double acting air valve 50 mm each 3370 Double acting air valve 80 mm each 4930
Code
7417 7418 7419 7420 7421 7422 7423 7424 7425 7426 7427 7428 7429 7430 7431 7432 7439 7442 7443 7444 7445 7449 7451 7452
Description of Materials Double acting air valve 100 mm Water meter (including testing charges) 80 mm Water meter (including testing charges) 100 mm Water meter (including testing charges) 150 mm Water meter (including testing charges) 200 mm Dirt box strainer 80 mm Dirt box strainer 100 mm Dirt box strainer 150 mm
Unit each each each each each each each each
Rate 6400 2030 3150 4560 5100 2620 4180 5420 7550 180 390 351 360 12 14 26 480 60 13 10 790 208 255 610
Dirt box strainer 200 mm each Cats eye each Water stops Serrated with central bulb (225 mm wide, 8-11 mm thick) metre Water stops Dumb bell with central bulb metre Kickers Wedge expansion hold fastener 1/4\" or 6 mm Wedge expansion hold fastener 3/8\" or 10 mm metre each each
Wedge expansion hold fastener 1/2\" or 12 mm each 8mm thick (mirror polished tiles machine cut edge) Raj Nagar white sqm Wheel 75 mm dia. 40 mm wide each Aluminium single cleat of size 30x32x3 Aluminium grip strip of size 50x12x2 25 mm prelaminated flush door both side decorative Aluminium U beading each each sqm kilogram
Glass sheet (Pin headed) 4 mm thick sqm Raj nagar plain white marble (table rubbed and polished) 18 mm thick above 0.10 sqm up to 0.20 sqm sqm
7453 7466 7468 7477 7478 7479 7480
Raj nagar plain white marble (table rubbed and polished) sqm 18 mm thick above 0.20 sqm up to 0.50 sqm 680 Second class deodar teak wood lipping 30 mm widthx12mm metre 30 Veneered particle board with commercial veneering on both sides 12 mm thick sqm 480
Prelaminated particle board with one side decorative andsqm side balencing lamination flat pressed 3 layer & graded (medium density) Grade I, Type other 690 Prelaminated particle board with one side decorative andsqm side balencing lamination flat pressed 3 layer & graded (medium density) Grade I, Type I other 810 Prelaminated particle board with one side decorative andsqm side balencing lamination flat pressed 3 layer & graded (medium density) Grade I, Type I other 880 Prelaminated particle board with both sides decorative lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS : 12 sqm 720 Oxidised M. S. hinges finished with nickel plating 50 mm (Over all width) Oxidised M. S. hinges finished with nickel plating 65 mm (Over all width) PTMT Waste Coupling 31/32MM PTMT Waste Coupling 38/40MM PTMT Bottle Trap 31/32MM PTMT Bottle Trap 38/40MM Each Each Each Each
7485 7486 7491 7492 7493 7494 7495 7496 7497 7498 7499 7500 7501 7503 7504 7505 7506 7507 7508 7509 7512 7513 7514 7515 7516 7517 7518 7552 7553 7555
39 49 51 64 317 345
PTMT Ball Cock 15mm Complete with Epoxy Coated Aluminium Road & H.D. Ball Each 134 PTMT Ball Cock 20mm Complete with Epoxy Coated Aluminium Road & H.D. Ball Each 195 PTMT Ball Cock 25mm Complete with Epoxy Coated Aluminium Road & H.D. Ball Each 420 PTMT Ball Cock 40mm Complete with Epoxy Coated Aluminium Road & 780 Each PTMT Ball Cock 50mm Complete with Epoxy Coated Aluminium Road & H.D. Ball Each 1150 PTMT Angle Stop cock with Flange 15mm Each 130 PTMT Swiveling shower 15mm Each 87 PTMT Liquid Soap Container of 400ml capacity Each 145 PTMT Towel Ring 215xd200x37mm Each 116 PTMT Towel Rail (450MM) Each 192 PTMT Towel Rail (600MM) Each 226 PTMT Shelf 450x124x36mm Each 258 PTMT Urinal Spreader 15MM Each 127 PTMT Soap Dish/Holder 138x102x75mm Each 120 PTMT handle 125x34x24mm Each 30 PTMT handle 150x34x24mm Each 34 PTMT butt hinges 75x60x10mm Each 42 PTMT butt hinges 100x75x10mm Each 56 PTMT Tower bolt 152x42x18mm Each 65 PTMT Tower bolt 202x42x18mm Each 80 PTMT door catcher 72x42mm Coir veneered board 4mm thick Coir veneered board 6mm thick Coir veneered board 12mm thick Each sqm sqm sqm 27 272 367 622
Code
7556 7651 7652 7653 7654 7655 7656 7657 7658 7659 7660 7661 7662 7663 7664 7665 7666 7668 7669 7670 7671 7672 7673 7674 7675 7676 7677 7678 7679 7680 7681 7682 7683 7684 7685 7686 7687 7688 7689 7690 7691 7692 7693 7694 7695 7696 7697 7698 7699 7700 7701 7702 7703 7704 7705 7706 7707 7708
Description of Materials Unit Coir veneered board 18mm thick sqm Ductile Iron class K - 9 pipe Conforming to I.S. 8329 100mm dia Metre Ductile Iron class K - 9 pipe Conforming to I.S. 8329 150mm dia Metre Ductile Iron class K - 9 pipe Conforming to I.S. 8329 200mm dia Metre Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 250mm dia Metre Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 300mm dia Metre Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 350mm dia Metre Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 400mm dia Metre Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 450mm dia Metre Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 500mm dia Metre Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 600mm dia Metre Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 700mm dia Metre Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 750mm dia Metre Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 800mm dia Metre Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 900mm dia Metre Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 1000mm dia Metre Rubber Gaskets Conforming to I.S 5382 of S.B.R quality Each dia 100mm Rubber Gaskets Conforming to I.S 5382 of S.B.R quality Each dia 150mm Rubber Gaskets Conforming to I.S 5382 of S.B.R quality Each dia 200mm Rubber Gaskets Conforming to I.S 5382 of S.B.R quality Each dia 250mm Rubber Gaskets Conforming to I.S 5382 of S.B.R quality Each dia 300mm Rubber Gaskets Conforming to I.S 5382 of S.B.R quality Each dia 350mm Rubber Gaskets Conforming to I.S 5382 of S.B.R quality Each dia 400mm Rubber Gaskets Conforming to I.S 5382 of S.B.R quality Each dia 450mm Rubber Gaskets Conforming to I.S 5382 of S.B.R quality Each dia 500mm Rubber Gaskets Conforming to I.S 5382 of S.B.R quality Each dia 600mm Rubber Gaskets Conforming to I.S 5382 of S.B.R quality Each dia 700mm Rubber Gaskets Conforming to I.S 5382 of S.B.R quality Each dia 750mm Rubber Gaskets Conforming to I.S 5382 of S.B.R quality Each dia 800mm Rubber Gaskets Conforming to I.S 5382 of S.B.R quality Each dia 900mm
Rate 950 797 1170 1595 2105 2680 3225 4350 5085 6180 7430 10050 11350 11990 14030 15750 26 36 62 73 103 127 234 260 285 352 542 636 684 915
Rubber Gaskets Conforming to I.S 5382 of S.B.R quality Each 1000mm dia 1138 Ductile Iron K - 12 specials suitable for push on jointing up to 600mm dia 11850 Quintal Ductile Iron K - 12 specials suitable for push on jointing over 600mm dia Quintal 16280 Ductile Iron specials suitable for mechanical jointing as per I.S. 9523 -up 12540 Quintal to 600mm dia Ductile Iron Specials suitable for mechanical jointing as per I.S. 9523 over 600mm dia Quintal Ductile Iron Pipe Class K-9 flanges and welding 100mm dia Metre Ductile Iron Pipe Class K-9 flanges and welding 150 dia metre Ductile Iron Pipe Class K-9 flanges and welding 200mm dia Metre Ductile Iron Pipe Class K-9 flanges and welding 250mm dia Metre Ductile Iron Pipe Class K-9 flanges and welding 300mm dia metre Ductile Iron Pipe Class K-9 flanges and welding 350mm dia Metre Ductile Iron Pipe Class K-9 flanges and welding 400mm dia Metre Ductile Iron Pipe Class K-9 flanges and welding 450mm dia Metre Ductile Iron Pipe Class K-9 flanges and welding 500mm dia Metre Ductile Iron Pipe Class K-9 flanges and welding 600mm dia Metre Ductile Iron Pipe Class K-9 flanges and welding 700mm dia Metre S&S Centrifugally (Spun) C.I. Pipe class LA 100mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 125mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 150mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 200mm dia Metre metre metre Metre
17580 2025 2825 3740 4935 6330 8020 9645 11675 13895 18760 23275 830 1040 1240 2120 2830 3740 4500 5870 7100 8250 11450
S&S Centrifugally (Spun) C.I. Pipe class LA 250mm dia Metre S&S Centrifugally (Spun) C.I. Pipe class LA 300mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 350mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 400mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 450mm dia Metre metre Metre Metre
S&S Centrifugally (Spun) C.I. Pipe class LA 500mm dia Metre S&S Centrifugally (Spun) C.I. Pipe class LA 600mm dia Metre S&S Centrifugally (Spun) C.I. Pipe Specials as per IS 1538 suitable
Code
7709
Description of Materials Unit for lead jointing up to 300mm dia Quintal S&S Centrifugally (Spun) C.I. Pipe Specials as per IS 1538 suitable for lead jointing over 300mm dia Quintal S&S Centrifugally (Spun) C.I. Pipe specials suitable for mechanical joint as per I.S. 13382 up to 300mm dia Quintal S&S Centrifugally (Spun) C.I. Pipe Specials suitable for mechanical joint as per IS 13382 over 300mm dia Quintal Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 100mm dia Metre Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 150mm dia Metre Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 200mm dia Metre Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 250mm dia Metre Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 300mm dia Metre Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 350mm dia Metre Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 400mm dia metre Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 450mm dia Metre Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 500mm dia metre Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 600mm dia Metre Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 100mm dia Metre Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 150mm dia Metre Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 200mm dia Metre Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 250mm dia Metre Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 300mm dia Metre Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 350mm dia Metre Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 400mm dia Metre Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 450mm dia Metre Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 500mm dia Metre Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 600mm dia metre Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 700mm dia Metre Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 800mm dia Metre Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 900mm dia metre Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 1000mm dia metre Extruded burnt flyash clay sewer bricks conforming to I.S 1000 Nos 4885 - 1988 Fly ash lime bricks (FALG Bricks) conforming to I.S. 12894-1989 1000 Nos Calcium Silicate Bricks machine moulded confirming to I.S. 4139 1989 1000 Nos Modified Bitumen Refinery produced CRMB - 55 Tonne Modified Bitumen Refinery produced CRMB - 60 tonne Bitumen emulsion medium setting (M.S.) confirming to IStonne : 8887-1995
Rate 5850 7500
7710 7711 7712 7713 7714 7715 7716
8200 8880 1260 1960 3170 3730 4770
7717 7718 7719 7720 7721 7722 7723 7724 7725 7726 7727 7728 7729 7730 7731 7732 7733 7734 7735 7736 7737 7738 7739 7741 7742 7743 7744 7745 7746 7747 7748 7749 7750 7751 7752 7753 7754 7755 7756 7757 7758 7759 7760 7761 7762 7763 7764 7765 7766 7767
6080 7890 9940 12390 15330 708 1035 1415 1920 2638 3135 3714 4411 5214 6801 8739 11156 14617 15485 3900 3300
3600 38500 38800 28200
Code
7768 7769 7770 7771 7772 7800 7801 7802 7803 7804 7805 7806 7807 7808 7809 7850 7857 7858 7859 7861 7862 7863 7864 7865 7866 7900 7901 7902 7903 7904 7954 8001 8002 8003 8004 8006 8007 8008 8010 8011 8012 8014 8100 8200 8201 8203 8204 8205 8206 8207 8210 8211 8212 8214 8215 8216 8217 8218 8219 8220 8221 8222 8223 8224 8225
Unit
Rate
Ceramic Glazed Tiles Ist quality minimum thickness 5mmSq.m. colours shades and designs except burgundy, bottle green, black in all 295 Ceramic Glazed Tiles Ist quality 300 x 300mm in all shades and designs of White, Ivory, grey, Fume Red brown etc. Sq.m. 360 Ceramic Glazed Tiles Ist quality 300 x 300 in all shades designs except White, Ivory, Grey, Fume Red Brown etc. Sq.m. 367 Rectified Ceramic Glazed Tiles Ist quality 300x 300 or more in all shades510 Sq.m. designs White, Ivory, Grey, Fume Red Brown etc. Rectified Ceramic Glazed Tiles Ist quality 300 x 300 or more in all shades designs except White, Ivory, Grey, Fume Red Brown etc. Sq.m. 535 Salem Stainless steel AISI - 304 (18/8) Orrisa pattern W.C. pan 724mm X 3630 each 578mm Salem Stainless steel AISI - 304 (18/8) Round basin 405mm X 355mm each 1690 Salem Stainless steel AISI - 304 (18/8) Wash basin 530mm X 345mm each 1470 Centrifugally cast (spun) iron S&S 100 mm inlet and 100 mm outlet each 392 Centrifugally cast (spun) iron S&S 100 mm inlet and 75 mm outlet each 424 Agaria White marble slab plain 18mm thick P.T.M.T. Grating square slit 150mm P.T.M.T. Urinal cock 15mm dia P.T.M.T. Bib cock with nozzle 15mm P.T.M.T. Stop cock (concealed) 15mm sqm each each each each 1090 77 94 133 173
15 mm nominal bore and 30 cm length PVC connection pipe with P.T.M.T. Nuts each 33 15 mm nominal bore and 45 cm length PVC connection pipe with P.T.M.T. Nuts each 38 P.T.M.T. extension nipple 15mm each 32 P.T.M.T. extension nipple 20mm each 38 P.T.M.T. extension nipple 25mm each 57 Modular bricks of class designation 75 1000 Nos 3150 Machine moulded perforated FPS bricks of class designation Nos 1000 125 Machine moulded modular perforated bricks of class designation 125 1000 Nos Machine moulded FPS bricks of class designation 125 1000 Nos Machine moulded tile bricks of class designation 125 Hardening compound 1000 Nos litre 4150 3800 3550 3700
24 mm thick Factory made shutters with frame, rails and panels of PVC extruded sections in white, grey or wooden finish sqm 2025 30 mm thick Factory made shutters with frame, rails and panels of PVC extruded sections in white, grey or wooden finish sqm 2125 Factory made PVC rigid foam paneled shutter i/c carriage sqm 2025 Factory made PVC rigid foam paneled shutter as per IS : sqm i/c carriage 2420 4020 Factory made PVC rigid foam sheet 1mm thick sqm 173 Factory made PVC rigid foam sheet 5mm thick sqm 632 Factory made prelaminated PVC rigid foam sheet 5mm thick sqm 752 48mmX40mmX1.5mm thick Factory made door frame of PVC extruded sections in white, grey or wooden finish metre 142 Factory made door frame PVC extruded sheet i/c carriage metre 330 Adhesive solvent cement kg 165 79 59 99 167 207 245 71 32 240 195 145
Powder coated M.S. butt hinges 100mm X58mmX1.9mm Nos 10 A.P.P. modified polymeric felt (two layers) 1.5 mm thick sqm A.P.P. modified polymeric felt (two layers) 2 mm thick sqm A.P.P. modified 2 mm thick membrane reinforced with glass fibre matt sqm A.P.P. modified 3 mm thick membrane reinforced with glass fibre matt sqm A.P.P. modified 3 mm thick membrane reinforced with polyester matt sqm Bitumen primer for bitumen membrane Geotextile 120 gsm membrane Stainless steel screws 50 mm Stainless steel screws 40 mm Stainless steel screws 30 mm litre sqm 100 Nos 100 Nos 100 Nos
Stainless steel screws 20 mm 100 Nos 95 Stainless steel butt hinges 125x64x1.9 mm IS : 12817 marked 10 Nos 240 Stainless steel butt hinges 100x58x1.9 mm IS : 12817 marked 10 Nos 215 Stainless steel butt hinges 75x47x1.8 mm IS : 12817 marked 10 Nos 145 Stainless steel butt hinges 50x37x1.5 mm IS : 12817 marked 10 Nos 125 Stainless steel butt hinges (heavy weight) 125x64x2.5 mm IS : 12817 marked 10 Nos 320 Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 12817 marked 10 Nos 230 Stainless steel butt hinges (heavy weight) 75x50x2.5 mm10 Nos IS : 12817 marked 195 M.S. heavy weight but hinges 125x90x4.0mm IS : 1341 marked. 10 Nos 320 M.S. heavy weight butt hinges 100x75x3.5 mm IS: 1341 10 Nos. marked 160 M.S. heavy weight butt hinges 75x60x3.1 mm IS: 1341 marked 10 Nos 83 M.S. heavy weight butt hinges 50x40x2.5 mm IS : 1341 marked 10 Nos 70
Code
8300 8301 8302 8303 8304 8305 8501 8502 8504 8505 8506 8507 8508 8509 8510 8589 8590 8591 8592 8593 8594 8595 8596 8597 8598 8599 8600 8601 8602 8603 8604 8605 8606 8607 8608 8609 8610 8611 8612 8613 8614 8615 8616 8617 8618 8620 8621 8622 8623 8625 8626 8627 8628 8629 8630
Description of Materials 1216 mm PE-AL-PE Composite pressure pipe 1620 mm PE-AL-PE Composite pressure pipe 2025 mm PE-AL-PE Composite pressure pipe 2532 mm PE-AL-PE Composite pressure pipe 3240 mm PE-AL-PE Composite pressure pipe 4050 mm PE-AL-PE Composite pressure pipe Polymer modified cementation coating Fibre glass cloth Multi surface paint Acrylic exterior paint Premium Acrylic exterior paint Textured exterior paint Primer for cement paint Special Primer (C.W.) Metal Primer (U.G.)
Unit Metre Metre Metre Metre Metre Metre kilogram sqm litre litre litre litre litre litre litre
Rate 90 111 143 193 310 335 127 39 272 130 230 198 63 83 107
Main T ceiling sections 24x38x0.3 mm (3 metre long) Perimeter wall angle 21x21 mm (3 metre long) Intermediate cross channel (1.2 mtrs) Intermediate cross channel (1.6 mtrs) Hanger rod 0.5 mm thick Adjustment clip Soffit cleat Dash fastener 6 mm dia 50 mm long
each each each each each each each each
187 118 72 34 7 6 3 11 735 865 1070 1630 32 50 46 124 196 286
Vitrified floor tile 50x50 cm sqm Vitrified floor tile 60x60 cm sqm Vitrified floor tile 80x80 cm sqm Vitrified floor tile 100x100 cm sqm Poly propylene- Random - Co - Polymer (PPR) pipes SDR 7.4 - 16 Outer dia metre Poly propylene - Random - Co - Polymer (PPR) pipes SDR 7.4 20mm Outer dia. metre Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 - 25 mm outer dia. metre Poly propylene - Random - Co - poymer (PPR) pipes SDR 7.4 32 mm Outer dia. metre Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 40mm Outer dia. metre Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 50mm Outer dia. metre Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 63mm Outer dia. metre Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 75mm Outer dia. metre Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 90mm Outer dia. metre Poly propylene - Random - Co - polymer (PPR) pipes SDR - 11 110mm Outer dia. metre Poly propylene - Random - Co - polymer (PPR) pipes SDR - 11160mm Outer dia. metre Chlorinated Polyvinyl - chloride (CPVC) pipe 15 mm outer dia. metre Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm outer dia. metre Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm outer dia. metre Chlorinated Polyvinyl - chloride (CPVC) pipe 32 mm outer dia. metre
8631 8632 8633 8634 8635 8636 8637 8638 8639
445 640 1020 1070 2255 51 63 90 120
Code
8640 8641 8642 8643 8644 8645 8646 8647 8648 8649 8650 8651 8652 8653 8654 8655 8656 8657 8658 8659 8660 8661 8662 8663 8664 8665 8666 8667 8668 8669 8670 8671 8672 8673 8674 8675 8676 8677 8678 8682 8683 8684 8685 8686 8687 8688 8689 8690 8691 8692 8693 8694 8695 8696 8697 8698 8699 8700 8703 8704 8705 8706
Rate Description of Materials Unit Chlorinated Polyvinyl - chloride (CPVC) pipe 40 mm outer dia. metre 170 Chlorinated Polyvinyl - chloride (CPVC) pipe 50 mm outer dia. metre 280 Chlorinated Polyvinyl - chloride (CPVC) pipe 62.5mm inner dia. metre 835 Chlorinated Polyvinyl - chloride (CPVC) pipe 75 mm inner dia. metre 1185 Chlorinated Polyvinyl - chloride (CPVC) pipe 100 mm inner dia. metre 1640 Chlorinated Polyvinyl - chloride (CPVC) pipe 150 mm inner dia. metre 2870 Silicon sealant. cartridge 307 Stainless steal screws 30mm x4mm. cent 29 Hermetically sealed double glazed unit made with 6mm thick clear float glass both side having 12 mm air gap. sqm 2290 Stainless steel (SS 304 grade) adjustable friction windoweach 205 x19mm 168 stay. Stainless steel (SS 304 grade) adjustable friction windoweach 255 x19mm 189 stay Stainless steel (SS 304 grade) adjustable friction windoweach 355 x19mm 236 stay. Stainless steel (SS 304 grade) adjustable friction windoweach 510 x 19 mm437 stay. Stainless steel (SS 304 grade) adjustable friction window stay. 710 x 19mm each 793 Masking tape. metre 2 Autoclaved aerated cement (AAC) blocks. cum 2025 Gypsum panel 666 X 500 X 100 mm size. sqm 455 Bonding plaster for Gypsum panel. kg 53 4300 Mechanised Autoclaved fly ash lime bricks. 1000 Nos Water proof ply 12mm thick. sqm Aluminium casement window fastener (Anodised AC 15 )each Aluminium casement window fastener (powder coated ). each Aluminium casement window fastener (polyester powder each coated). Aluminium round shape handle (anodised AC 15) each Aluminium round shape handle (powder coated) each Aluminium round shape handle (polyester powder coated). each Stainless steel screws 25mm x4mm cent UV stabilised 2 mm thick plain FRP sheet . sqm UV stabilised 2 mm thick corrugated FRP sheet . Mangalore ridge tiles 20mm thick. Mangalore tiles 20mm thick. Precoated galvanised iron profile sheet 0.50 mm TCT Precoated galvanised steel plain ridges. Precoated galvanised steel flashings/aprons. Precoated galvanised steel gutter Precoated galvanised steel north light curves. sqm each each sqm metre metre metre metre 645 40 41 42 49 54 59 32 465 538 29 10.2 435 440 440 455 455 445 475 37 400 435 310 4025 63 62 325
Precoated galvanised steel barge board. metre Precoated galvanised steel crimp curve sqm 1mm thick 35mm wide bright finished stainless steel piano hinges . metre Red sand stone gang saw cut 30mm thick. White sand stone gang saw cut 30mm thick. Delineator Precast C.C. Kerb stone M - 25 Thermoplastic paint Glass beads Interlocking C.C. paver block ( 60 mm thick, M-30 ) sqm sqm each cum kg kg sqm
High intensity retro - reflective sheet. sqm 1525 Punched tape concertina coil 600 m dia. 10m openable length (Total length 730 bundle 90m) RBT reinforced barbed wire. Turn buckle and strengthening bolt. metre each set 8.50 40
Precast pavement slab 450 x 450 x 50mm (M - 30). each 55 Chain link fabric fencing mesh of size 50x50mm made ofsqm wire of dia. 4mm. G.I. 258 Chain link fabric fencing mesh of size 50x50mm made of G.I. wire of dia. 4mm, PVC coated to outer dia. 5mm. sqm Chain link fabric fencing mesh of size 25x25mm made of G.I. wire of dia. 3mm. sqm Stainless steel cramps with nuts, bolts and washer for dry stone cladding . each 8 mm thick tapered edge calcium silicate board . sqm
285 340 84 223
10 mm thick calcium silicate board. sqm 370 Telescopic drawer channels 300mm long . set 135 Stainless steel roller for sliding arrangement in racks/ cupboards/ cabinets shutter . each 8 50mmX42mmX2mm thick Factory made door frame of PVC extruded sections in white, grey or wooden finish metre 135 25mm thick factory made PVC flush door shutter i/c carriage. sqm 2050
Code
8707 8708 8709 8710 8711 8712 8713 8714 8715 8716 8717 8719 8720 8721 8722 8723 8724 8725 8726 8727 8730 8731 8732 8733 8734 8735 8736 8737 8738 8739 8740 8741 8742 8743 8744 8745 8746 8747 8748 8749 8750 8751 8752 8753 8754 8755 8756 8757 8758 8759 8760 8761 8762 8763 8764 8765 8766 8767 8768 8769 8770 8771 8772 8773 8774 8775 8776 8777 8778 9999 1474A
Rate Description of Materials Unit Factory made glass reinforced plastic door frame 90x45 mm i/c carriage. 365 metre 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage. sqm 1715
Factory made solid PVC door frame 60 x 30mm i/c carriage. metre 28mm factory made solid PVC panel door shutter i/c carriage. sqm
270 3120
Fiber glass reinforced plastic chajja. Magnetic catcher triple strip vertical type. Magnetic catcher double strip horizontal type. 100 mm mortice lock with 6 levers for aluminium door. 12.5 mm thick Glass fibre reinforced Gypsum board .
sqm each each each sqm
3460 15 12 310 160
2nd class teak wood lipping/ moulded beading or Taj beading of size 18X5mm metre 25 Ceiling sections 0.55 mm thick having a knurled web of 51.55mm and two flanges of 26mm each with lips of 10.55mm. metre 39 Perimeter channel having one flange of 20mm and another flange of 30mm with thickness of 0.55mm and web of length 27mm. metre 25 Nylon sleeves & wooden screws (40mm) each 2 Counter sunk ribbed head screw 25mm. cent 72 12mm thick marine plywood conforming to IS:710 sqm 825 12mm thick fire retardant plywood conforming to IS: 5509. sqm 860 1.5 mm thick decorative laminated sheet sqm 475 1.0 mm thick decorative laminated sheet sqm 350 30 mm thick factory made glass fiber reinforced plastic flush door shutter i/c carriage. sqm 1975 High polymer modified quickset tile adhesive per kg 30 Synthetic ployster triangular fibre of length 12mm, effective diameter 10-40 microns and specific gravity of 1:34 to 1:40. kg 365 Synthetic ployster triangular fibre of length 6mm, effective diameter 10-40 microns and specific gravity of 1:34 to 1:40. kg 365
Sundries Machine (Hilti TE - 706)
L.S. per day
1.49 500
Code
1474B 1476A 1477A 1477B 1477C 1480A 3050A 7022A 979B 810A 7027A 7029A 869A 558A 558B 8733 7116A 4011A 7861A 7861B 7861C 1008A 1023A 1215A 1215B 1620A 1620B 2205A 2302A 3050B 367A 367B 4009A 7231A 4009B 713A 7034A 7035A 1350A 8695A 828A 7800A 7802A 7504A 7503A 7506A 2505A 7049A 3004A 7196A 423A 452A 223A 1896A 1896B 1168A 1718A
Description of Materials Hilti bit for chipping Nitobond EP (Fosroc Make ) Renderoc RGL 55 baqs @ 25 Aggregate 10 mm down 55x18.5
Unit each per ltr per kg per kg
Rate 2000 1068 37.5 0.7 450 1130 400 100
Water plant & machincry for mixing & weighing the micro core kg per Nito Zinc primer make fosroc per litre
Veedified like Granomaxin etc. i/c carriage Cost of Clay earth Coal cinder at quarry
1481.25 sqm Regular Modified Polyester coated concealed fixed galvanised steel sheet Z-18-275Mpa litre cum
600 cum Box hinges, lugs, pivots etc. each 560 Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia. of wire 0.38 mm sqm 560 Plaster of Paris wall putty - Birla, J.K. white or equivalent kg 35 ULTRA VERTIBOLT' locks (Godrej Product code-9972) i/c Carriage & Installation charges each 1700 Hydaulic Door Closure' Heavy duty (Godrej Product code-1938) i/c Carriage336 each & Installation charges Synthetic polyester triangular fibre of length 12 mm, kg Acostyle boards (for wall panelling) sqm 1400.00 Stainless Steel tube 50mm & 37mm dia kg 260.00 Conceal (base) of 37 mm dia each 200.00 Conceal (base) of 25 mm dia each Fastner = 6 x 4 = 24 nos. each 16.00 Galvalome steel 0.5mm TCT in thickness sqm 78.00 Fastaner / clips etc. L.S. 50.00 12.50 Welding charge,Labour- for cutting, assembling & erectionL.S. Labour & machinery charge etc. i/c 120.00 Welding charge,Labour- for cutting, assembling & erectionL.S. Labour & machinery charge etc. i/c Bend of 50 mm dia each 200.00 Bend of 25 mm dia each 150.00 4.17 Carriage of tuss kg (b) Carriage of Tracdek Klippon sheet (a) Tracdek Klippon Sheets i/c CST 4% Cost of cement / kg Cost of cement / bag Truss (as per manufacturer specifications) Resin Bonded Glass wool 16 kg/m3 50 mm thick sqm sqm kg kg kg sqm 102.00 998.40
93.60 333.18 567
Cost of Aluminium ladder each 35mm thick door shutters (light/ordinary type 125x70x4 mm) sqm Nickle plated steel pipe 20 mm dia. metre Nickle plated steel Brackets for curtain rod 20 each each
2400.0 54.0 15.0 600 mm dia standard mosquito proof C.I. hinged cover with frame i/c fixing 240 each G.I. Wire mesh cum 128.9 Painting with Anticorrosive bituminous paint (black) cum 24.0 1st quality ceramic glazed wall Tiles of size (30cmx60cm) sqm 320.0 Rectified cermic glazed floor Tiles 400x400 sqm 450.0 Towel ring (Cat No. 1121 N Jaguar or equivalent each 230.0 soap dish (Cat CHR-1189) Jaguar or equivalent each 140.0 towel rail 60 mm long (Cat No. 771) of Jaguar or equivalent ach e 210.0 Local hard wood 10 cudm 1000 Lipping with teak wood 25x12.5 mm metre Stone ware spouts 40 mm dia 450 mm long each UPVC single equal Tee (with door) 75x75x75 mm each MS casement window fastner each MS screws 25 mm 100 Nos Asbestos cement board 6 mm thick sqm 100 mm dia sand cast iron long body 'P' trap each 100 mm dia sand cast iron normal 'P' trap each Kota stone slab 20 mm to 25 mm thick (mirror-polished) sqm 525.0 RCC pipe NP3 concrete pipe metre
Sr. Refere No. nce to MORD Specifi cations 1.1 (i)
Chapter 1 LOADING, UNLOADING AND CARRIAGE OF MATERIALS Description Unit Quantity
Rate (Rs.)
Total Amount (Rs.)
Loading of Lime, aggregate , Stone Boulder, Brick aggaregate, Kankar, Building Rubbish, Crushed Slag, Stone for Masonry Work by manual means including a lead upto 30 m. Unit = cum Taking output = 5.5 cum a) Labour Mate Mazdoor ( Unskilled) b) Machinery Truck Cost for 5.5 cum = a+b Rate per cum = (a+b)/5.5
day day hour
0.02 0.50 0.50
260.00 247.00 750.00
5.20 123.50 375.00 503.70 91.58 91.60
Say
1.1
(ii)
Loading of Earth, Sand, Stone, Chips, Moorum, Manure, Flyash by manual means including a lead upto 30 m. Unit = cum Taking output = 5.5 cum a) Labour Mate Mazdoor ( Unskilled) b) Machinery Truck Cost for 5.5 cum = a+b Rate per cum = (a+b)/5.5 Say
day day hour
0.02 0.25 0.25
260.00 247.00 750.00
5.20 61.75 187.50 254.45 46.26 46.26
1.1
(iii)
Unloading of Lime, aggregate , Stone Boulder, Brick aggaregate, Kankar, Building Rubbish, Crushed Slag, Stone for Masonry Work by manual means including a lead upto 30 m. Unit = cum Taking output = 5.5 cum a) Labour Mate day 0.02 260.00 5.20 Mazdoor ( Unskilled) day 0.25 247.00 61.75 b) Machinery Truck hour 0.25 750.00 187.50 Cost for 5.5 cum = a+b 254.45 Rate per cum = (a+b)/5.5 46.26 Say 46.26 Unloading of Earth, Sand, Stone, Chips, Moorum, Manure, Flyash by manual means including a lead upto 30 m. Unit = cum Taking output = 5.5 cum a) Labour Mate Mazdoor ( Unskilled) Machinery Truck day day hour 0.005 0.125 0.166 260.00 247.00 750.00 1.30 30.88 124.50
1.1
(iv)
b)
Cost for 5.5 cum = a+b Rate per cum = (a+b)/5.5 Say
156.68 28.49 28.50
1.2
(i)
Loading of Lime, aggregate , Stone Boulder, Brick aggaregate, Kankar, Building Rubbish, Crushed Slag, Stone for Masonry Work by Mechanical Means including a lead upto 30 m.
Placing tipper at loading point, loading with front Unit = cum end loader excluding time for haulage and return trip Taking output = 5.5 cum Time required for i) Positioning of Tipper at loading point =1 ii) Loading by Front end min loader 1time bucket cum iii) Waiting capacity 45 ,unforeseen a) Machinery cum per hour = 7.33 min = contingencies, etc. Tipper 10 t capacity 2.00 Min Front end-loader 1 cum
hour hour bucket capacitytree = a+b+c+d Rate for each @ 45 Cost for 5.5 cum = a+b cum per hour Rate per cum = (a+b)/5.5
0.172 0.122
0.00 0.00
Say 1.2 (ii)
0.00 0.00 0.00 0.00 0.00 0.00
Loading of Earth, Sand, Stone, Chips, Moorum, Manure, Flyash by Mechanical Means including a lead upto 30 m.
Placing tipper at loading point, loading with front Unit = cumend loader excluding time for haulage and return trip Taking output = 5.5 cum Time required for i) Positioning of Tipper at loading point =1 ii) Loading by Front end min loader 1time bucket iii) Waiting cum capacity 45 cum per ,unforeseen a) Machinery hour = 3.30 min = contingencies, etc. Tipper 10 t capacity 2.00 Min Front end-loader 1 cum Cost for 5.5 cum = a+b bucket capacity @ 45 cum Rate per cum = (a+b)/5.5 per hour
hour hour
0.105 0.055
0.00 0.00
Say 1.2 (iii) Unloading of Earth, Sand, Stone, Chips, Lime,Moorum, Aggregate, Stone Boulder, Brick Aggregate, Kankar, Building Rubbish, Manure, Crushed Slag, Stone for Masonary Works by Mechanical Means. Placing tipper at unloading point excluding time = cum Unit for haulage and return trip Taking output = 5.5 cum Time required for i) Positioning of Tipper at loading point =1 ii) Loading by Front end min loader 1 cum iii) Waiting time bucket capacity 45 cum per ,unforeseen a) Machinery hour = 2.00min contingencies, etc. = Tipper 10 t capacity Cost for 5.5 cum = a+b 2.00 Min Rate per cum = (a+b)/5.5
0.00 0.00 0.00 0.00 0.00
hour
0.080
0.00
Say
0.00 0.00 0.00 0.00
1.3
(i)
Loading of Bricks by manual means including a lead upto 30 m. Unit = 1000 Nos Taking output = 2000 Nos a) Labour Mate Mazdoor ( Unskilled)
day day
0.001 0.250
260.00 247.00
0.26 61.75
b)
Machinery Truck Cost for 2000 Nos = a+b Rate for 1000 bricks= (a+b)/2.0
hour
0.330
750.00
Say 1.3 (ii)
247.50 309.51 154.76 154.80
Unloading and Stacking of Bricks by manual means including a lead upto 30 m. Unit = 1000 Nos Taking output = 2000 Nos a) Labour Mate Mazdoor ( Unskilled) b) Machinery Truck Cost for 2000 Nos = a+b Rate for 1000 bricks= (a+b)/2.0
day day hour
0.001 0.250 0.330
260.00 247.00 750.00
0.26 61.75 247.50 309.51 154.76 154.80
Say 1.4 (i) Loading of Cement by manual means including a lead upto 30 m. Unit = t Taking output = 10 t a) Labour Mate day 0.060 260.00 Mazdoor ( Unskilled) day 1.500 247.00 b) Machinery Truck hour 1.000 750.00 Cost for 10 t = a+b Rate per tonnes= (a+b)/10 Say Unloading of Cement by manual means including a lead upto 30 m. Unit = t Taking output = 10 t a) Labour Mate day 0.060 260.00 Mazdoor ( Unskilled) day 1.500 247.00 b) Machinery Truck hour 1.000 750.00 Cost for 10 t = a+b Rate per tonnes= (a+b)/10 Say
15.60 370.50 750.00 1136.10 113.61 113.60
1.4
(ii)
15.60 370.50 750.00 1136.10 113.61 113.60
1.5
(i)
Loading of Structure Steel , Steel Bars by manual means including a lead upto 30 m. Unit = t Taking output = 10 t a)
b)
Labour Mate Mazdoor ( Unskilled) Machinery Truck
day day hour
0.070 1.800 1.000
260.00 247.00 750.00
18.20 444.60 750.00 1212.80 121.28 121.30
Cost for 10 t = a+b Rate per tonnes= (a+b)/10 Say 1.5 (ii)
Unloading of Structure Steel , Steel Bars by manual means including a lead upto 30 m. Unit = t Taking output = 10 t a)
b)
Labour Mate Mazdoor ( Unskilled) Machinery Truck
day day hour
0.070 1.800 1.000
260.00 247.00 750.00
18.20 444.60 750.00 1212.80 121.28 121.30
Cost for 10 t = a+b Rate per tonnes= (a+b)/10 Say
1.6
(i)
Loading and Unloading of Bitumen Drums by Manual Means. Loading of Bitumen Drums by manual means including a lead upto 30 m. Unit = t Taking output = 10 t a) Labour Mate day 0.060 260.00 15.60 Mazdoor ( Unskilled) day 1.600 247.00 395.20 b) Machinery Truck hour 1.250 750.00 937.50 Cost for 10 t = a+b 1348.30 Rate per tonnes= (a+b)/10 134.83 Say 134.80 Unloading of Bitumen Drums by manual means including a lead upto 30 m. Unit = t Taking output = 10 t a) Labour Mate day 0.050 260.00 13.00 Mazdoor ( Unskilled) day 1.200 247.00 296.40 b) Machinery Truck hour 1.250 750.00 937.50 Cost for 10 t = a+b 1246.90 Rate per tonnes= (a+b)/10 124.69 Say 124.70 Loading with care C.C. Blocks , km Stone , 200 m Stone , Boundary Pillar , Kerb , Channel, Bond , etc. by manual means including a lead upto 30 m. Unit =cum Taking output = 5.5 cum a) Labour Mate Mazdoor ( Unskilled) b) Machinery Truck Cost for 5.5 cum = a+b Rate per cum = (a+b)/5.5
1.6
(ii)
1.8
(i)
day day hour
0.080 2.000 1.500
260.00 247.00 750.00
20.80 494.00 1125.00 1639.80 298.15 298.10
Say 1.8 (ii)
Unloading with care C.C. Blocks , km Stone , 200 m Stone , Boundary Pillar , Kerb , Channel, Bond , etc. by manual means including a lead upto 30 m. Unit =cum Taking output = 5.5 cum a) Labour Mate Mazdoor ( Unskilled) b) Machinery Truck Cost for 5.5 cum = a+b Rate per cum = (a+b)/5.5
day day hour
0.080 2.000 1.500
260.00 247.00 750.00
20.80 494.00 1125.00 1639.80 298.15 298.10
Say 1.9 (i)
Loading of RCC Hume Pipes by mechanical means including a lead upto 30 m. 1000/1200 mm dia A. pipe Unit =Per Pipe Taking output = 9 pipes a) Labour Mate Mazdoor ( Unskilled) b) Machinery Truck Crane Cost for 9 Pipes = a+b Rate per Pipe= (a+b)/9
day day hour hour
0.020 0.500 0.330 0.330
260.00 247.00 750.00 812.50
5.20 123.50 247.50 268.13 644.33 71.59 71.60
Say
1.9
(i)
Loading of RCC Hume Pipes by mechanical means including a lead upto 30 m. B. 750 mm dia pipe Unit =Per Pipe Taking output = 15 pipes a) Labour Mate Mazdoor ( Unskilled) b) Machinery Truck Crane Cost for 15 Pipes = a+b Rate per Pipe= (a+b)/15
day day hour hour
0.020 0.500 0.330 0.330
260.00 247.00 750.00 812.50
5.20 123.50 247.50 268.13 644.33 42.96 43.00
Say 1.9 (i)
Loading of RCC Hume Pipes by mechanical means including a lead upto 30 m. C. 600 mm dia pipe Unit =Per Pipe Taking output = 21 pipes a) Labour Mate Mazdoor ( Unskilled) b) Machinery Truck Crane Cost for 21 Pipes = a+b Rate per Pipe= (a+b)/21
day day hour hour
0.020 0.500 0.330 0.330
260.00 247.00 750.00 812.50
5.20 123.50 247.50 268.13 644.33 30.68 30.70
Say 1.9 (ii) Unloading of RCC Hume Pipes by manual means including a lead 1000/1200 mm dia A. pipe Unit =Per Pipe Taking output = 5 pipes a) Labour Mate day 0.040 Mazdoor ( Unskilled) day 1.000 b) Machinery Truck hour 2.000 c) Material Wooden sleepers hour 2.000 250mm x 250mm x Crow bars 2 n0s. Not hour 2.000 125 mm hiremm dia. 3 less than 40 charges Cost for 5 Pipes = a+b+c n0s sleeper Rate per Pipe= (a+b)/5
upto 30 m.
260.00 247.00 750.00 50.00 25.00
10.40 247.00 1500.00 100.00 50.00 1907.40 381.48 381.50
,+++++++ ,+++++++
Say 1.9 (ii) Unloading of RCC Hume Pipes by manual means including a lead C. 600/450 mm dia pipe Unit =Per Pipe Taking output = 8 pipes a) Labour Mate day 0.040 Mazdoor ( Unskilled) day 1.000 b) Machinery Truck hour 2.000 c) Material Wooden sleepers hour 2.000 250mm x 250mm x hour 2.000 Crow bars 2 n0s. Not less than 40 charges Cost for 8 Pipes = a+b 125 mm hiremm dia. 3 n0s sleeper Rate per Pipe= (a+b)/8
upto 30 m.
260.00 247.00 750.00 50.00 25.00
10.40 247.00 1500.00 100.00 50.00 1907.40 238.43 238.40
Say 1.9 (iii)
Unloading of RCC Hume Pipes by machanical means including a lead upto 30 m. 1000/1200 mm dia A. pipe Unit =Per Pipe Taking output = 5 pipes a) Labour Mate day 0.020 260.00 5.20
Mazdoor ( Unskilled) Machinery Truck Crane Cost for 9 Pipes = a+b+c Rate per Pipe= (a+b)/9 b)
day hour hour
0.500 0.200 0.200
247.00 750.00 812.50
123.50 150.00 162.50 441.20 49.02 49.00
Say 1.9 (iii)
Unloading of RCC Hume Pipes by machanical means including a lead upto 30 m. B. 750 mm dia pipe Unit =Per Pipe Taking output = 15 pipes a) Labour Mate day 0.020 260.00 5.20 Mazdoor ( Unskilled) day 0.500 247.00 123.50 b) Machinery Truck hour 0.200 750.00 150.00 Crane hour 0.200 812.50 162.50 Cost for 15 Pipes = a+b+c 441.20 Rate per Pipe= (a+b)/15 29.41 Say 29.40 Unloading of RCC Hume Pipes by machanical means including a lead upto 30 m. C. 600/450mm dia pipe Unit =Per Pipe Taking output = 21 pipes a) Labour Mate Mazdoor ( Unskilled) b) Machinery Truck Crane Cost for 21 Pipes = a+b+c Rate per Pipe= (a+b)/21
1.9
(iii)
day day hour hour
0.020 0.500 0.200 0.200
260.00 247.00 750.00 812.50
5.20 123.50 150.00 162.50 441.20 21.01 21.00
Say
Carriage of Materials
DAR'07 / Vol - I, Page- 55/ 1.1.2 Code Description MATERIALS : Lead (L) Average speed(s) No. of trips (N) = KMs done (2 NL + 6) Cost of diesel = 57.90/5.00 Cost of mobile = 57.90/140.00 Belder Hire charges of truck Total Cost = Cost per trip = Unit Quantity Rate Amount
1.00 km 16.00 km/ hour 8/(2L/S+1) Ltr Ltr Each Day 20.22 4.04 0.144 6.00 1.00 30.25 95.00 135.25 1008.00 122.21 13.68 811.50 1008.00 1955.39 275.02
1235 5001 114 5
Therefore Cost for carriage of 1.00 cum earth per trip {(2582.30/6.4)/5.19}
58.87
53
1.0 Carriage of Materials
Data Sheet No 1 for Analysis of Rates
1.1 By Mechanical Transport including loading, unloading and stacking Code 5 114 115 1235 Lead in km Average speed Nos of Trips N=8/ (2L/S)+1 Material Name Hire Charges of truck Beldar Coolie High Speed Diesel Litres of Cost of Mobil oil Mobil oil consumed @ Rs per @ 140 km Litre per Litre 7 0.14 0.23 0.30 0.36 0.41 0.46 0.51 0.55 0.59 0.63 0.66 0.70 0.73 0.77 0.80 0.83 0.86 0.89 0.91 0.94 0.97 1.00 1.03 1.05 1.08 1.11 1.13 1.16 1.19 1.21 8 26.78 42.41 55.43 66.77 77.00 86.12 94.67 102.30 109.93 116.99 123.50 130.01 136.15 142.29 147.87 153.82 159.22 164.80 170.00 175.40 180.42 185.63 190.65 196.04 200.69 205.53 210.92 215.57 220.60 225.62
1 1.00 2.00 3.00 4.00 5.00 6.00 7.00 8.00 9.00 10.00 11.00 12.00 13.00 14.00 15.00 16.00 17.00 18.00 19.00 20.00 21.00 22.00 23.00 24.00 25.00 26.00 27.00 28.00 29.00 30.00 Notes
2 16.00 17.00 17.50 18.00 18.50 19.00 19.50 20.00 20.50 21.00 21.50 22.00 22.50 23.00 23.50 24.00 24.50 25.00 25.50 26.00 26.50 27.00 27.50 28.00 28.50 29.00 29.50 30.00 30.50 31.00
5001 Mobil Oil Nos of Litres of Cost of km Diesel Diesel Done consum @ Rs per in one ed Litre Day @ 5 km (2NL+6) per Litre 3 4 5 6 7.11 166.81 20.22 4.04 6.48 263.43 31.92 6.38 5.96 344.77 41.76 8.35 5.54 415.38 50.32 10.06 5.19 478.14 57.90 11.58 4.90 535.12 64.80 12.96 4.66 588.38 71.24 14.25 4.44 636.28 77.04 15.41 4.26 682.94 82.68 16.54 4.10 726.70 88.00 17.60 3.95 767.17 92.90 18.58 3.83 808.46 97.92 19.58 3.71 846.03 102.46 20.49 3.61 884.43 107.08 21.42 3.51 919.12 111.30 22.26 3.43 955.86 115.76 23.15 3.35 990.13 119.90 23.98 3.28 124.08 24.82 1024.82 3.21 127.98 25.60 1057.02 3.15 132.00 26.40 1090.06 3.09 135.78 27.16 1121.44 3.04 139.76 27.95 1154.06 2.99 143.54 28.71 1185.44 2.95 147.60 29.52 1218.88 2.90 151.00 30.20 1246.96 2.86 154.72 30.94 1277.51 2.83 158.82 31.76 1311.37 2.79 162.24 32.45 1339.86 2.76 166.08 33.22 1371.65 2.73 169.80 33.96 1402.21
1. Number of trips in working day of 8 hours N=
2L + 1 2. Consumption of diesel taken at 5 km per litre s 3. Consumption of mobile oil taken at 140 km per litre. 4. In column 4 of km done an allowance of 6.0 km has been made for movement of truck from parking place to duty & b 5. (i) Cost of disel @ (12 35) per litre (ii) Cost of moble oil @ (5001) per litre (iii) Hire charges of truck @ (0005) for a day of 8 hours.
1.0 Carriage of Materials

1.1 By Mechanical Transport
S.No
Material
capacity Net Qty per Trip
Payable after deduction for
Unit of rates
1km
Cost per Trip per unit 2km 3km
looseness
Cost per Trip as per Col. 12 of Data sheet Net Qty Payable 5 cum cum cum cum cum cum cum 1000 Nos 1000 Nos tonne 7 57.59 71.98 62.60 115.18 57.59 62.60 67.75 122.09 73.26 51.19 8 65.35 81.69 71.03 130.70 65.35 71.03 76.88 139.58 83.75 58.09 9 73.03 91.29 79.38 146.07 73.03 79.38 85.92 156.89 94.13 64.92
1 1.1.1 1.1.2 1.1.3 1.1.4 1.1.5 1.1.6 1.1.7 1.1.8 1.1.9 1.1.10
2 Lime, moorum, building rubbish Earth Manure or sludge Excavated rock Sand, stone aggregate below 40 mm nominal size Stone aggregate 40 mm nominal size and above Soling stone Bricks Brick Tiles Cement, stone blocks, G.I.. C.I., A.C., & C.C. pipes below 100 mm dia and other heavy materials Steel Timber Tar bitumen Solvent Steam coal S.W. pipe 100 mm dia 150 mm dia 200 mm dia 230 mm dia 250 mm dia 300 mm dia 350 mm dia 400 mm dia 450 mm dia 500 mm dia 600 mm dia R.C.C. pipes, A.C. pipes, steel cylinder, R.C. pipes, C.I. pipes, C.I. pipes and unreinforced cement pipes 100 mm dia 125 mm dia 150 mm dia 200 mm dia 250 mm dia 300 mm dia 350 mm dia 400 mm dia 450 mm & 500 mm dia 600, 700, 750 & 800 mm 900 mm dia 1000, 1100 & 1200 mm
3 8 8 8 8 8 8 8 3000 5000 9
4 8 6.4 7.36 4 8 7.36 6.8 3000 5000 9
1.1.11 1.1.12 1.1.13 1.1.14 1.1.15 1.1.16 1.1.16.1 1.1.16.2 1.1.16.3 1.1.16.4 1.1.16.5 1.1.16.6 1.1.16.7 1.1.16.8 1.1.16.9 1.1.16.10 1.1.16.11 1.1.17
9 7 8 80 7 600 300 180 126 105 84 60 42 33 30 24
9 7 8 80 7 600 300 180 126 105 84 60 42 33 30 24
tonne cum tonne qtl tonne 100 m 100 m 100 m 100 m 100 m 100 m 100 m 100 m 100 m 100 m 100 m
51.19 65.81 57.59 5.76 65.81 76.78 153.57 255.95 365.64 438.76 548.46 767.84 1096.91 1396.07 1535.68 1919.59
58.09 74.69 65.35 6.54 74.69 87.14 174.27 290.45 414.93 497.92 622.40 871.36 1244.80 1584.29 1742.72 2178.39
64.92 83.47 73.03 7.30 83.47 97.38 194.75 324.59 463.70 556.44 695.55 973.77 1391.10 1770.49 1947.54 2434.42
1.1.17.1 1.1.17.2 1.1.17.3 1.1.17.4 1.1.17.5 1.1.17.6 1.1.17.7 1.1.17.8 1.1.17.9 1.1.17.10 1.1.17.11 1.1.17.12
366 274 219.6 135 95 76.86 54.9 40.26 32.94 21.96 14.64 10.98
366 274 219.6 135 95 76.86 54.9 40.26 32.94 21.96 14.64 10.98
100 m 100 m 100 m 100 m 100 m 100 m 100 m 100 m 100 m 100 m 100 m 100 m
100.08 133.68 166.79 271.32 385.56 476.55 667.17 909.78 1111.96 1667.93 2501.90 3335.87
114.41 152.82 190.68 310.17 440.77 544.80 762.72 1040.07 1271.19 1906.79 2860.19 3813.58
128.60 171.77 214.33 348.64 495.43 612.36 857.30 1169.05 1428.84 2143.26 3214.89 4286.52
Lead
Avg Speed
age of Materials
or Analysis of Rates
ing, unloading and stacking: Unit Day Day Day Litre Rate 1600.00 247.00 247.00 41.29 Average cost per additional km after first 5,10 and 20 km 14
Litre 186.00 Cost of Hire charges Total 6 Beldars of truck Cost= @ Rs per @ Rs per 6+8+9+10 Day Day
9 1482.00 1482.00 1482.00 1482.00 1482.00 1482.00 1482.00 1482.00 1482.00 1482.00 1482.00 1482.00 1482.00 1482.00 1482.00 1482.00 1482.00 1482.00 1482.00 1482.00 1482.00 1482.00 1482.00 1482.00 1482.00 1482.00 1482.00 1482.00 1482.00 1482.00
10 1600.00 1600.00 1600.00 1600.00 1600.00 1600.00 1600.00 1600.00 1600.00 1600.00 1600.00 1600.00 1600.00 1600.00 1600.00 1600.00 1600.00 1600.00 1600.00 1600.00 1600.00 1600.00 1600.00 1600.00 1600.00 1600.00 1600.00 1600.00 1600.00 1600.00
11 3275.60 3387.84 3482.20 3564.15 3637.14 3703.24 3765.06 3820.58 3874.86 3925.70 3972.67 4020.47 4064.18 4108.72 4148.99 4191.69 4231.35 4271.61 4309.03 4347.45 4383.86 4421.68 4458.09 4496.92 4529.65 4565.04 4604.29 4637.43 4674.25 4709.83
51.34
42.27
34.51
where L= Load in km., S= Speed in km per hour, 1 hour is allowed for loading /unloading.
rom parking place to duty & back.
4km
5km
Beyond Total Carriage 5 km upto 10 km cost 10 km For Lead of per km 5 Km
Col. 12 of Data sheet
10 80.42 100.52 87.41 160.84 80.42 87.41 94.61 173.57 104.14 71.48
11 87.60 109.50 95.22 175.20 87.60 95.22 103.06 189.84 113.90 77.87
As per Col. 14 of Data Sheet A B C Net Qty Payable 12 15 87.60 6.42 109.50 8.02 95.22 6.98 175.20 12.83 87.60 6.42 6.98 7.55 14.66 8.79 5.70 95.22 103.06 263.12 *****10 Km Lead Assumed Fixed 157.87 *****20 Km Lead Assumed Fixed 77.87
71.48 91.91 80.42 8.04 91.91 107.22 214.45 357.42 510.59 612.71 765.89 1072.25 1531.78 1949.54 2144.50 2680.62
77.87 100.11 87.60 8.76 100.11 116.80 233.60 389.33 556.19 667.43 834.28 1168.00 1668.57 2123.63 2335.99 2919.99
5.70 7.33 6.42 0.64 7.33 8.56 17.11 28.52 40.74 48.89 61.12 85.56 122.23 155.57 171.13 213.91
77.87 100.11 87.60 8.76 100.11 116.80 233.60 389.33 556.19 667.43 834.28 1168.00 1668.57 2123.63 2335.99 2919.99
142.27 190.05 237.12 385.72 548.13 677.50 948.50 1293.40 1580.83 2371.24 3556.86 4742.48
155.61 207.85 259.34 421.86 599.49 740.98 1037.37 1414.60 1728.95 2593.43 3890.14 5186.85
12.01 16.05 20.02 32.57 46.28 57.21 80.09 109.21 133.48 200.22 300.33 400.44
215.67 *****10 Km Lead Assumed Fixed 288.09 *****10 Km Lead Assumed Fixed 359.45 *****10 Km Lead Assumed Fixed 584.71 *****10 Km Lead Assumed Fixed 830.90 *****10 Km Lead Assumed Fixed 1027.01 *****10 Km Lead Assumed Fixed 1437.81 *****10 Km Lead Assumed Fixed 1960.65 *****10 Km Lead Assumed Fixed 2396.35 *****10 Km Lead Assumed Fixed 3594.52 *****10 Km Lead Assumed Fixed 5391.78 *****10 Km Lead Assumed Fixed 7189.05 *****10 Km Lead Assumed Fixed
SUB HEAD : 4
CONCRETE WORK
4.1
4.1.1 Code
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level: 1:1:2 ( 1 Cement: 1 coarse sand : 2 graded stone aggregate 20 mm nominal size) Discription Unit Quantity Rate Amount
295 297 2202 982 2203 367 2209 155 114 101 2 12 9999
4.1
4.1.2 Code
295 297 2202 982 2203 367 2209 155 144 101 2 12 9999
Details of cost for 1 cum MATERIALS Stone aggregate 20mm cum 0.64 1050.00 672.00 Stone aggregate 10mm cum 0.21 1050.00 220.50 Carriage of aggregate 20mm and 10 mm cum 0.85 0.00 0.00 Coarse sand cum 0.43 1120.00 476.00 Carriage of coarse sand cum 0.43 0.00 Cement (0.425 cum) tonne 0.61 5000.00 3050.00 Carriage of cement tunne 0.61 77.87 47.50 Labour; 0.00 Mason Day 0.10 287.00 28.70 Beldar Day 1.63 247.00 402.61 Bhishti Day 0.70 260.00 182.00 Mixer Day 0.07 800.00 56.00 Vibrator Day 0.07 300.00 21.00 Sundries L.S 14.30 1.49 21.31 TOTAL 5177.62 Add 1% for water charges 51.78 TOTAL 5229.40 Add 15 % for contractors profit and overheads 784.41 Cost of 1 cum. 6013.81 Say 6013.81 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level: 1 1:1/2 :3 ( 1 Cement: 1/2 coarse sand : 3 graded stone aggregate 20 mm nominal size) Discription Unit Quantity Rate Amount Details of cost for 1 cum. Materials : Stone aggregate 20mm cum 0.57 1050.00 598.50 Stone aggregate 10mm cum 0.28 1050.00 294.00 Carriage of aggregate cum 0.85 0.00 0.00 Coarse sand cum 0.43 1120.00 476.00 Carriage of coarse sand cum 0.43 0.00 0.00 Cement (0.2833 cum) tonne 5000.00 2000.00 0.40 Carriage of cement tonne 0.40 77.87 31.15 Labour: 0.00 Mason Day 0.10 287.00 28.70 Beldar Day 1.63 247.00 402.61 Bhishti Day 0.70 260.00 182.00 Mixer Day 0.07 800.00 56.00 Vibrator Day 0.07 300.00 21.00 Sundries L.S. 14.30 1.49 21.31 TOTAL 4111.27 Add 1 % for water charges 41.11 TOTAL, 4152.38 15 % for contractors profit and 622.86 overheads Cost of 1 cum. 4775.24 Say 4775.24
4.1
4.1.3 Code
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level: 1:2:4 ( 1 Cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Discription Unit Quantity Rate Amount
295 297 2202 982 2203 367 2209 155 114 101 2 12 9999
Details of cost for 1 cum. Materials: Stone aggregate 20mm cum Stone aggregate 10 mm cum Carriage of aggregate cum Coarse sand cum Carriage of coarse sand cum Cement (0.2833 cum) tonne Carriage of cement tonne Labour: Mason Day Beldar Day Bhishti Day Mixer Day Vibrator Day Sundries L.S TOTAL Add 1 % for water charges TOTAL Add. 15% for contractors profit and overheads Cost of 1 cum. Say
0.67 0.22 0.89 0.445 0.445 0.32 0.32 0.10 1.63 0.70 0.07 0.07 14.30
1050.00 1050.00 0.00 1120.00 0.00 5000.00 77.87 287.00 247.00 260.00 800.00 300.00 1.49
703.50 231.00 0.00 498.40 0.00 1600.00 24.92 28.70 402.61 182.00 56.00 21.00 21.31 3769.44 37.69 3807.13 571.07 4378.20 4378.20
4.1
4.1.4 Code
293 295 297 2206 2202 982 2203 367 2209 155 114 101 2 12 9999
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level: 1:2:4 ( 1 Cement: 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) Discription Unit Quantity Rate Amount Details of cost for 1 cum. Materials : Stone aggregate 40mm (one size)cum (0.56-7.5% 0.52 950.00 494.00 for voids) i.e. 0.04 = 0.52 cum) Stone aggregate 20mm (one size)cum 0.22 1050.00 231.00 Stone aggregate 10mm (one size)cum 0.11 1050.00 115.50 Carriage of aggregate 40mm cum 0.52 0.00 0.00 Carriage of aggregate below 40mm size cum 0.33 0.00 0.00 Coarse sand cum 0.45 1120.00 498.40 Carriage of coarse sand cum 0.45 0.00 0.00 Cement (0.2225 cum) tonne 0.32 5000.00 1600.00 Carriage of cement tonne 0.32 77.87 24.92 Labour: Mason Day 0.10 287.00 28.70 Beldar Day 1.63 247.00 402.61 Bhishti Day 0.70 260.00 182.00 Mixer Day 0.07 800.00 56.00 Vibrator Day 0.07 300.00 21.00 Sundries L.S. 13.52 1.49 20.14 TOTAL 3577.13 Add 1% for water charges 35.77 TOTAL 3612.90 Add 15% for contractors profit and overheads 541.93 Cost of 1 cum. 4154.83 Say 4154.83
4.1
4.1.5 Code
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level: 1:3:6 ( 1 Cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) Discription Unit Quantity Rate Amount Details of cost for 1 cum. Materials : Stone aggregate 20mm Stone aggregate 10 mm Carriage of aggregate Coarse sand
295 297 2202 982
cum cum cum cum
0.70 0.24 0.94 0.47
1050.00 1050.00 0.00 1120.00
735.00 252.00 0.00 526.40
2203 367 2209 155 114 101 2 12 9999
Carriage of coarse sand cum Cement (0.15674 cum) tonne Carriage of cement tonne Labour: Mason Day Beldar Day Bhishti Day Mixer Day Vibrator Day Sundries L.S. TOTAL Add 1 % for water charges TOTAL, Add 15% for contractors profit and overheads Cost of 1 cum. Say
0.47 0.22 0.22 0.10 1.63 0.70 0.07 0.07 13.52
0.00 5000.00 77.87 287.00 247.00 260.00 800.00 300.00 1.49
0.00 1100.00 17.13 28.70 402.61 182.00 56.00 21.00 20.14 3340.99 33.41 3374.40 506.16 3880.56 3880.56
4.1
4.1.6 Code
293 295 2206 2202 982 2203 367 2209 155 114 101 2 12 9999
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level: 1:3:6 ( 1 Cement: 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) Discription Unit Quantity Rate Amount Details of cost for 1 cum. Materials : Stone aggregate 40mm (one size) (0.70 cum 0.65 950.00 617.50 cum-7.5% for voids i.e. 0.05 = 0.65 cum Stone aggregate 20mm cum 0.24 1050.00 252.00 Carriage of aggregate 40mm cum 0.65 0.00 0.00 Carriage of aggregate 20mm cum 0.24 0.00 0.00 Coarse sand cum 0.47 1120.00 526.40 Carriage of coarse sand cum 0.47 0.00 0.00 Cement (0.15674 cum) tonne 0.22 5000.00 1100.00 Carriage of cement tonne 0.22 77.87 17.13 Labour: Mason Day 0.10 287.00 28.70 Beldar Day 1.63 247.00 402.61 Bhishti Day 0.70 260.00 182.00 Mixer Day 0.07 800.00 56.00 Vibrator Day 0.07 300.00 21.00 Sundries L.S. 13.52 1.49 20.14 TOTAL 3223.49 Add 1% for water charges 32.23 TOTAL 3255.72 Add 15% for contractors profit and overheads 488.36 Cost of 1 cum. 3744.08 Say 3744.08 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level: 1:3:6 ( 1 Cement: 3 fine sand : 6 graded stone aggregate 40 mm nominal size) Discription Details of cost for 1 cum. Materials : Stone aggregate 40mm (one size) (0.70 cum-7.5% for voids i.e. 0.05 = 0.65 cum Stone aggregate 20 mm (one size) Carriage of aggregate 40mm Carriage of aggregate 20mm Fine sand Carriage of fine sand Cement (0.15674 cum) Carriage of cement Labour: Mason Beldar Bhishti Mixer Vibrator Unit Quantity Rate Amount
4.1
4.1.7 Code
293 295 2206 2202 982 2261 367 2209 155 114 101 2 12
cum cum cum cum cum cum tonne tonne Day Day Day Day Day
0.65 0.24 0.65 0.24 0.47 0.47 0.22 0.22 0.10 1.63 0.70 0.07 0.07
950.00 1050.00 0.00 0.00 1120.00 0.00 5000.00 77.87 287.00 247.00 260.00 800.00 300.00
617.50 252.00 0.00 0.00 526.40 0.00 1100.00 17.13 28.70 402.61 182.00 56.00 21.00
9999
Sundries L.S. TOTAL Add 1% for water charges TOTAL Add 15% for contractors profit and overheads Cost of 1 cum. Say
13.52
1.49
20.14 3223.49 32.23 3255.72 488.36 3744.08 3744.08
4.1
4.1.8 Code
293 295 2206 2202 982 2261 367 2209 155 114 101 2 12 9999
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering All work upto plinth level: 1:4:8 ( 1 Cement: 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Discription Unit Quantity Rate Amount Details of cost for 1 cum. Materials : Stone aggregate 40mm (one size) (0.70 cum 0.65 950.00 617.50 cum-7.5% for voids i.e. 0.05 = 0.65 cum Stone aggregate 20 mm cum 0.24 1050.00 252.00 Carriage of aggregate 40mm cum 0.65 0.00 0.00 Carriage of aggregate 20mm cum 0.24 0.00 0.00 Corase sand cum 0.47 1120.00 526.40 Carriage of coarse sand cum 0.47 0.00 0.00 Cement (0.1175 cum) tonne 0.17 5000.00 850.00 Carriage of cement tonne 0.17 77.87 13.24 Labour: Mason Day 0.10 287.00 28.70 Beldar Day 1.63 247.00 402.61 Bhishti Day 0.70 260.00 182.00 Mixer Day 0.07 800.00 56.00 Vibrator Day 0.07 300.00 21.00 Sundries L.S. 13.52 1.49 20.14 TOTAL 2969.59 Add 1% for water charges 29.70 TOTAL 2999.29 Add 15% for contractors profit and overheads 449.89 Cost of 1 cum. 3449.18 Say 3449.18
4.1
4.1.9 Code
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level: 1:4:8 ( 1 Cement: 4 fine sand : 8 graded stone aggregate 40 mm nominal size) Discription Unit Quantity Rate Amount Details of cost for 1 cum. Materials : Stone aggregate 40mm (one size)cum (0.70 cum-7.5% for voids i.e. 0.05 = 0.65 cum Stone aggregate 20 mm (One size) cum Carriage of aggregate 40mm cum Carriage of aggregate 20mm cum Fine sand cum Carriage of fine sand cum Cement (0.1175 cum) tonne Carriage of cement tonne Labour: Mason Day Beldar Day Bhishti Day Mixer Day Vibrator Day Sundries L.S. TOTAL Add 1% for water charges TOTAL Add 15% for contractors profit and overheads Cost of 1 cum.
293 295 2206 2202 983 2261 367 2209 155 114 101 2 12 9999
0.65 0.24 0.65 0.24 0.47 0.47 0.17 0.17 0.10 1.63 0.70 0.07 0.07 13.52
650.00 700.00 57.83 53.21 320.00 53.21 4500.00 47.29 146.55 135.25 138.45 400.00 200.00 1.00
422.50 168.00 37.59 12.77 150.40 25.01 765.00 8.04 14.66 220.46 96.92 28.00 14.00 13.52 1976.87 19.77 1996.64 299.50 2296.14
Say 4.1
2296.15
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level: 4.1.10 1:5:10 ( 1 Cement: 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) Code Discription Unit Quantity Rate Amount Details of cost for 1 cum. Materials : 293 Stone aggregate 40mm (one size)cum (0.70 0.65 950.00 617.50 cum-7.5% for voids i.e. 0.05 = 0.65 cum 295 Stone aggregate 20 mm (One size) cum 0.24 1050.00 252.00 2206 Carriage of aggregate 40mm cum 0.65 0.00 0.00 2202 Carriage of aggregate 20mm cum 0.24 0.00 0.00 982 Coarse sand cum 0.47 1120.00 526.40 2203 Carriage of coarse sand cum 0.47 0.00 0.00 367 Cement (0.2225 cum) tonne 0.13 5000.00 650.00 2209 Carriage of cement tonne 0.13 77.87 10.12 Labour: 155 Mason Day 0.10 287.00 28.70 114 Beldar Day 1.63 247.00 402.61 101 Bhishti Day 0.70 260.00 182.00 2 Mixer Day 0.07 800.00 56.00 12 Vibrator Day 0.07 300.00 21.00 9999 Sundries L.S. 13.52 1.49 20.14 TOTAL 2766.48 Add 1% for water charges 27.66 TOTAL 2794.14 Add 15% for contractors profit and overheads 419.12 Cost of 1 cum. 3213.26 Say 3213.26 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level: 1:5:10 ( 1 Cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size) Discription Unit Quantity Rate Amount Details of cost for 1 cum. Materials : Stone aggregate 40mm (one size) (0.70 cum cum-7.5% for voids i.e. 0.05 = 0.65 cum Stone aggregate 20 mm (One size) cum Carriage of aggregate 40mm cum Carriage of aggregate 20mm cum Fine sand cum Carriage of fine sand cum Cement (0.2225 cum) tonne Carriage of cement tonne Labour: Mason Day Beldar Day Bhishti Day Mixer Day Vibrator Day Sundries L.S. TOTAL Add 1% for water charges TOTAL Add 15% for contractors profit and overheads Cost of 1 cum. Say
4.1.11 Code
293 295 2206 2202 983 2261 367 2209 155 114 101 2 12 9999
0.65 0.24 0.65 0.24 0.47 0.47 0.13 0.13 0.10 1.63 0.70 0.07 0.07 8.97
950.00 1050.00 0.00 0.00 640.00 0.00 5000.00 77.87 287.00 247.00 260.00 800.00 300.00 1.49
617.50 252.00 0.00 0.00 300.80 0.00 650.00 10.12 28.70 402.61 182.00 56.00 21.00 13.37 2534.10 25.34 2559.44 383.92 2943.36 2943.36
4.1
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level: 1 1 4.1.12 1:2:3 / :9 ( 1 Ordinary Portland cement : 2 Fly ash : 3 / coarse sand : 9 graded stone 2 2 aggregate 40 mm nominal
Code
293 295 2206 2202 982 2203 1980 2262 367 2209 155 114 101 2 12 9999
Discription Unit Quantity Rate Details of cos tfor 1 cum. Materials: Stone aggregate 40mm (one size)cum (0.70 0.65 650.00 cum-7.5% for voids i.e. 0.05-0.65 cum) Stone aggregate 20 mm (one size) um c 0.24 700.00 Carriage of aggregate 40 mm cum 0.65 57.83 Carriage of agregate 20 mm cum 0.24 53.21 Coarse sand cum 0.37 600.00 Carriage of coarse sand cum 0.37 53.21 Fly ash cum 0.21 6.00 Carriage of fly ash cum 0.21 53.21 Cement tonne 0.17 4500.00 Carriage of cement tonne 0.17 47.29 LABOUR; Mason Day 0.10 146.55 Beldar Day 1.63 135.25 Bhishti Day 0.70 138.45 Mixer Day 0.07 400.00 Vibrator Day 14.30 200.00 Sundries L.S. 1.00 14.30 TOTAL Add 1% for water charges TOTAL Add 15% for contractors profits and overheads Cost of 1 cum. Say
Amount
422.50 168.00 37.50 12.77 222.00 19.69 1.26 11.17 765.00 8.04 14.66 220.46 96.92 28.00 14.10 14.30 2056.30 20.56 2076.92 311.54 2388.46 2388.45
4.1
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level:
4.1.13 1:2 1/2:4:11( 1 Ordinary Portland cement : 2 1/2 Fly ash : 4 coarse sand : 11 graded stone aggregate 40 mm nominal Code Discription Unit Quantity Rate Amount Details of cost for 1 cum. Materials : 293 Stone aggregate 40mm (one size)cum (0.70 0.65 650.00 422.50 cum-7.5% for voids i.e. 0.05 - 0.65 cum) 295 Stone aggregate 20 mm (one size) um c 0.24 700.00 168.00 2206 Carriage of aggregate 40mm cum 0.65 57.83 37.59 2202 Carriage of aggregate 20mm cum 0.24 53.21 12.77 982 Coarse sand cum 0.34 600.00 204.00 2203 Carriage of coarse sand cum 0.34 53.21 18.09 1980 Fly ash cum 0.21 6.00 1.26 2262 Carriage of fly ash cum 0.21 53.21 11.17 367 Cement tonne 0.13 4500.00 585.00 2209 Carriage of cement tonne 0.13 47.29 6.15 LABOUR: 155 Mason Day 0.10 146.55 14.66 114 Beldar Day 1.63 135.25 220.46 101 Bhishti Day 0.70 138.45 96.92 2 Mixer Day 0.07 400.00 28.00 12 Vibrator Day 0.07 200.00 14.00 9999 Sundries L.S. 14.30 2.60 14.30 TOTAL 1854.87 Add 1% for water charges 18.55 TOTAL 1873.42 Add 15% for contractors profit and overheads 281.01 Cost of 1 cum. 2154.43 Say 2154.45
4.1
4.2.1
Providing and laying cement concrete in retaining walls, return walls (any thickness) including attached pilasters, columns, piers, abutmets, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks, anchor blocks, plain window sills, fillets etc upto floor five level, excluding the cost of centring, shuttering and finishing: 1:1:2 (1 cement: 1 coarse sand : 2 graded stone aggregate 20 mm nominal size)
Code
Discription
Unit
Quantity Rate
Amount
295 297 2202 982 2203 367 2209 114 115 101 123 124 2 12 9999 9999 115
4.2
4.2.2 Code
295 297 2202 982 2203 367 2209 114 115 101 123 124 2 12 9999 9999 115
Details of cost for 1 cum. Materials: Stone aggregate 20mm cum 0.64 700.00 448.00 Stone aggregate 10 mm cum 0.21 700.00 147.00 Carriage of aggregate 20mm and 10 mm cum 0.85 53.21 45.23 Coarse sand cum 0.43 700.00 255.00 Carriage of coarse sand cum 0.43 53.21 22.61 Cement (0.425 cum) tonne 0.61 4500.00 2745.00 Carriage of cement tonne 0.61 47.29 28.85 Labour: Beldar Day 0.90 135.25 121.72 Coolie Day 0.78 135.25 105.50 Bhishti Day 0.70 138.45 96.92 Mason 1st class Day 0.06 151.50 9.09 Mason Ilnd class Day 0.06 141.60 8.50 Mixer Day 0.07 400.00 28.00 Vibrator Day 0.07 200.00 14.00 Scaffolding L.S. 114.40 1.00 114.40 Sundries L.S. 14.30 1.00 14.30 (Extra labour for lifting.material upto floor Day 1.13 135.25 152.83 level) Coolie (0.75x1.50) TOTAL 4356.95 Add 1 % for water charges 43.57 TOTAL 4400.52 Add 15% for contractors profit and overheads 660.08 Cost of 1 cum. 5060.60 Say 5060.60 Providing and laying cement concrete in retaining walls, return walls (any thickness) including attached pilasters, columns, piers, abutmets, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks, anchor blocks, plain window sills, fillets etc upto floor five level, excluding the cost of centring, shuttering and finishing: 1 1 1:1 / :3 (1 cement: 1 / coarse sand : 3 graded stone aggregate 20 mm nominal size) 2 2 Discription Unit Quantity Rate Amount Details of cost for 1 cum. Materials: 20mm stone aggregate cum 0.57 700.00 399.00 Stone aggregate 10mm cum 0.28 700.00 196.00 Carriage of aggregate cum 0.85 53.21 45.23 Coarse sand cum 0.43 600.00 255.00 Carriage of coarse sand cum 0.43 53.21 22.61 Cement (0.2833 cum) tonne 0.40 4500.00 1800.00 Carriage of cement tonne 0.40 47.29 18.92 Labour: Beldar Day 0.90 135.25 121.72 Coolie Day 0.78 135.25 105.50 Bhishti Day 0.70 138.45 96.92 Mason 1st class Day 0.06 151.50 9.09 Mason Ilnd class Day 0.06 141.60 8.50 Mixer Day 0.07 400.00 28.00 Vibrator Day 0.07 200.00 14.00 Scaffolding L.S. 114.40 1.00 114.40 Sundries L.S. 14.30 1.00 14.30 (Extra labour for lifting.material upto floor Day 1.13 135.25 152.83 level) Coolie (0.75x1.50) TOTAL 3402.02 Add 1 % for water charges 34.02 TOTAL 3436.04 Add 15% for contractors profit and overheads 515.41 Cost of 1 cum. 3951.45 Say 3951.45
4.2
Providing and laying cement Concrte in retaining walls, return walls (any thickness)
4.2.3 Code
including attached pilasters, columns, piers, abutmets, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks, anchor blocks, plain window sills, fillets etc upto floor five level, excluding the cost of centring, shuttering and finishing: 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Discription Unit Details of cost for 1 cum. Materials: Stone aggregate 20 mm cum Stone aggregate 10 mm cum Carriage of aggregate cum Coarse sand cum Carriage of coarse sand cum Cement (0.2833 cum) tonne Carriage of cement tonne Labour: Beldar Day Coolie Day Bhishti Day Mason 1st class Day Mason Ilnd class Day Mixer Day Vibrator Day Scaffolding L.S. Sundries L.S. (Extra labour for lifting.material upto floor Day level) Coolie (0.75x1.50) TOTAL Add 1 % for water charges TOTAL Add 15% for contractors profit and overheads Cost of 1 cum. Say Quantity Rate Amount
295 297 2202 982 2203 367 2209 114 115 101 123 124 2 12 9999 9999 115
0.67 0.22 0.89 0.445 0.445 0.32 0.32 0.90 0.78 0.70 0.06 0.06 0.07 0.07 114.40 14.30 1.13
1050.00 1050.00 0.00 1120.00 0.00 5000.00 77.87 247.00 247.00 260.00 301.00 273.00 800.00 300.00 1.49 1.49 247.00
703.50 231.00 0.00 498.40 0.00 1600.00 24.92 222.30 192.66 182.00 18.06 16.38 56.00 21.00 170.46 21.31 279.11 4237.09 42.37 4279.46 641.92 4921.38 4921.38
4.2
4.2.4 Code
Providing and laying cement Concrte in retaining walls, return walls (any thickness) including attached pilasters, columns, piers, abutmets, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks, anchor blocks, plain window sills, fillets etc upto floor five level, excluding the cost of centring, shuttering and finishing: 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) Discription Unit Quantity Rate Amount Details of cost for 1 cum. Materials: Stone aggregate 40 mm (one size) (0.56-7.5% cum for voids i.e. 0.04 = 0.52 cum) Stone aggregate 20 mm (one zize) um c Stone aggregate 10 mm (one size) um c Carriage of aggregate 40 mm cum Carriage of aggregate 20 mm and cum 10 mm Coarse sand cum Carriage of coarse sand cum Cement (0.2225 cum) tonne Carriage of cement tonne Labour: Beldar Day Coolie Day Bhishti Day Mason 1st class Day Mason Ilnd class Day Mixer Day Vibrator Day Scaffolding L.S. Sundries L.S. (Extra labour for lifting.material upto floor Day level) Coolie (0.75x1.50) TOTAL Add 1 % for water charges
293 295 297 2206 2202 982 2203 367 2209 114 115 101 123 124 2 12 9999 9999 115
.52 .22 .11 .52 .33 .445 .445 .32 .32 .9 .78 .7 .06 .06 .07 .07 114.4 13.52 1.13
650 700 700 57.83 53.21 600 53.21 4,500 47.29
338 154 77 30.07 17.56 267 23.68 1,440 15.13
135.25 121.72 135.25 105.5 138.45 96.92 151.5 9.09 141.6 8.5 400 28 200 14 1 114.40 1 13.52 135.25 152.83 3,026.92 30.27
TOTAL Add 15% for contractors profit and overheads Cost of 1 cum. Say
3,057.19 458.58 3,515.77 3,515.75
4.2
4.2.5 Code
Providing and laying cement Concrte in retaining walls, return walls (any thickness) including attached pilasters, columns, piers, abutmets, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks, anchor blocks, plain window sills, fillets etc upto floor five level, excluding the cost of centring, shuttering and finishing: 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) Discription Unit Quantity Rate Amount Details of cost for 1 cum. Materials: Stone aggregate 20 mm cum Stone aggregate cum Carriage of aggregate cum Coarse sand cum Carrage of Coarse sand cum Cement tonne Carriage of cement tonne Labour: Beldar Day Coolie Day Bhishti Day Mason 1st class Day Mason Ilnd class Day Mixer Day Vibrator Day Scaffolding L.S. Sundries L.S. (Extra labour for lifting.material upto floor Day level) Coolie (0.75x1.50) TOTAL Add 1 % for water charges TOTAL Add 15% for contractors profit and overheads Cost of 1 cum. Say
295 297 2202 982 2203 367 2209 114 115 101 123 124 2 12 9999 9999 115
0.70 0.24 0.94 0.47 0.47 0.22 0.22 0.90 0.78 0.70 0.06 0.06 0.07 0.07 114.40 13.52 1.13
1050.00 1050.00 0.00 1120.00 0.00 5000.00 77.87 247.00 247.00 260.00 301.00 273.00 800.00 300.00 1.49 1.49 247.00
735.00 252.00 0.00 526.40 0.00 1100.00 17.13 222.30 192.66 182.00 18.06 16.38 56.00 21.00 170.46 20.14 279.11 3808.64 38.09 3846.73 577.01 4423.74 4423.74
4.2
4.2.6 Code
293 295 2206 2202 982 2203 367 2209 114 115 101 123 124
Providing and laying cement Concrte in retaining walls, return walls (any thickness) including attached pilasters, columns, piers, abutmets, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks, anchor blocks, plain window sills, fillets etc upto floor five level, excluding the cost of centring, shuttering and finishing: 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) Discription Unit Quantity Rate Amount Details of cost for 1 cum. Materials: Stone aggregate 40 mm (one size) (0.70 cum .65 650 422.5 cum 7.5% for voids i.e. 0.05 = 0.65 cum) Stone aggregate 20 mm (One size) cum .24 700 168 Carriage of aggregate 40 mm cum .65 57.83 37.59 Carriage of aggregate 20 mm cum .24 53.21 12.77 Coarse sand cum .47 600 282 Carriage of coarse sand cum .47 53.21 25.01 Cement (0.15674 cum) tonne .22 4,500 990 Carriage of cement tonne .22 47.29 10.4 Labour: Beldar Day .9 135.25 121.72 Coolie Day .78 135.25 105.5 Bhishti Day .7 138.45 96.92 Mason 1st class Day .06 151.5 9.09 Mason Ilnd class Day .06 141.6 8.5
2 12 9999 9999 115
4.2
4.2.7 Code
293 295 2206 2202 983 2261 367 2209 114 115 101 123 124 2 12 9999 9999 115
Mixer Day .07 400 28 Vibrator Day .07 200 14 Scaffolding L.S. 114.4 1 114.4 Sundries L.S. 13.52 1 13.52 (Extra labour for lifting.material upto floor Day 1.13 135.25 152.83 level) Coolie (0.75x1.50) TOTAL 2,612.75 Add 1 % for water charges 26.13 TOTAL 2,638.88 Add 15% for contractors profit and overheads 395.83 Cost of 1 cum. 3,034.71 Say 3,034.7 Providing and laying cement Concrte in retaining walls, return walls (any thickness) including attached pilasters, columns, piers, abutmets, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks, anchor blocks, plain window sills, fillets etc upto floor five level, excluding the cost of centring, shuttering and finishing: 1:3:6 (1 cement: 3 fine sand : 6 graded stone aggregate 40 mm nominal size) Discription Unit Quantity Rate Amount Details of cost for 1 cum. Materials: Stone aggregate 40 mm(one size)cum (0.70 .65 650 422.5 cum 7.5% for voids i.e. 0.05 = 0.65 cum) Stone aggregate 20 mm cum .24 700 168 Carriage of aggregate 40 mm cum .65 57.83 37.59 Carriage of aggregate 20 mm cum .24 53.21 12.77 Fine sand cum .47 320 150.4 Carriage of fine sand cum .47 53.21 25.01 Cement (0.15674 cum) tonne .22 4,500 990 Carriage of cement tonne .22 47.29 10.4 Labour: Beldar Day .9 135.25 121.72 Coolie Day .78 135.25 105.5 Bhishti Day .7 138.45 96.92 Mason 1st class Day .06 151.5 9.09 Mason Ilnd class Day .06 141.6 8.5 Mixer Day .07 400 28 Vibrator Day .07 200 14 Scaffolding L.S. 114.4 1 114.4 Sundries L.S. 13.52 1 13.52 (Extra labour for lifting.material upto floor Day 1.13 135.25 152.83 level) Coolie (0.75x1.50) TOTAL 2,481.15 Add 1 % for water charges 24.81 TOTAL 2,505.96 Add 15% for contractors profit and overheads 375.89 Cost of 1 cum. 2,881.85 Say 2,881.85
4.3 4.3.1 Code
Centering shuttering including struttings, propping etc. and removal of form work for: Foundations, footings, bases for columns. Discription Unit Details of cost for footing size 2.7mx2.7mxl.00m Contact area = 10.8 sqm. Material: Assuming shuttering material will become unserviceable after use of 40 times Adding for maintenance @ 10% of cost Taking salvage value after full use of material @ 25% of cost Wall form panel 1250x500mm each Qty taken for cost of using once = 16x0.85/40 = 0.34 Corner angle (1.5m long) each Qty taken for cost of using once = 4x0.85/40 = .085 Quantity Rate Amount
7319
0.34
1050.00
357.00
7326
0.085
300.00
25.50
7327
7328
7329
7330
9999 9999 116 114 9999 9999
100mm channel shoulders 2.5m long each Qty taken for cost of using once = 8x0.85/40= .17 Double clip (bridge clip) each Qty taken for cost of using once = 16x0.85/40 = 0.34 Single clip each Qty taken for cost of using once = 8x0.85/40 = .17 MS tube 40mm - 4x2.7m = 10.8m metre Qty taken for cost of using once = 10.8x0.85/40 = 0.2295 Assembly nuts & bolts L.S Carriage L.S Labour: Fitter Grade-I Day Beldar Day Shuttering oil L.S Sundries L.S TOTAL Add 1% for water charges TOTAL ]S-%% Add-WMrfor contractors profit and overheads Cost for 10.8 sqm. Cost per sqm. Say
0.17
1160.00
197.20
0.34
97.00
32.98
0.17
77.00
13.09
0.2295
280.00
64.26
22.10 78.00 0.75 1.50 52.00 26.00
1.49 0.00 301.00 247.00 1.49 1.49
32.93 0.00 225.75 370.50 77.48 38.74 1435.43 14.35 1449.78 217.47 1667.25 154.38 154.38
4.3 4.3.2
Centering shuttering including struttings, propping etc. and removal of form work for: Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses plinth and string courses fillets etc. Discription Unit Quantity Rate Amount
Code
Details for 7.9m long and 1.00m high wall Area of contact 2x7.9x1.0 = 15.8 sqm. Materials: Assuming shuttering material will be unseviceable after use of times Adding for maintenance @ 10% of cost Taking salvage value after full use of material @ 25% of cost 7319 Wall form Panel (1.25x0.5) 2x3x2x2 = 24 ach e Nos. Qty taken for cost of using once = 24x0.85/40 = 0.51 each 7327 100mm channel shoulder 2.5m long, 4x2 = 8 Qty taken for cost of using once = 8x0.85/40 = .17 7328 Bridge clip 2x6x2 = 24 Qty taken for cost of using once =each 24x0.85/40 = 0.51 7329 Single clip 2x3x2 = 12 each Qty taken for cost of using once = 12x0.85/40 = 0.255 7330 M.S. Tube 40mm 2x2x8m = 32m metre Qty taken for cost of using once = 32x0.85/40 = 0.68 9999 Nut & Bolts L.S 9999 Carriage L.S Labour: 116 Fitter Grade-I Day 114 Beldar Day 9999 Shuttering oil L.S 9999 Sundries L.S TOTAL Add 1 % for water charges TOTAL Add 15% for contractors profit and overheads
.51
98
499.8
.17
1,000
170
.51 .255
75 60
38.25 15.3
.68
225
153
27.62 78 3.5 6 78 52
1 1 151.5 135.25 1 1
27.62 78 530.25 811.5 78 52 2,453.72 24.54 2,478.26 371.74
Cost for 15.8 sqm. Cost per sqm. Say 4.3 4.3.3 Code
2,850 180.38 180.4
7331
7332
7333
7334 9999 9999 116 114 9999 9999
Centering shuttering including struttings, propping etc. and removal of form work for: Columns, piers, abutments, pillaras, posts and struts. Discription Unit Quantity Rate Amount Detail of cost for Size of column 450x450mm and 2.5m high Area of contact = 4x0.45x2.5 = 4.5 sqm. Assuming shuttering will become unserviceable after use of 40 times Add maintenance charges @ 10% of cost of Material Less salvage value of material after full use @ 25% of cost of material Wall form panel (1250x450) each .17 900 153 Qty taken for cost of using once = 8x0.85/40 = .17 Corner angle 2.5m long each .085 275 23.38 Qty taken for cost of using once = 4x0.85/40 = .085 Column clamp (450-1070mm) each .1063 1,100 116.93 Qty taken for cost of using once = 5x0.85/40 = .1063 Prop. 2m (2.0-3.5m) each .085 750 63.75 Qty taken for cost of using once = 4x0.85/40 = .085 Assembly nut & bolt L.S 27.62 1 27.62 Carriage L.S 52 1 52 Labour Fitter Grade-I Day 1 151.5 151.5 Beldar Day 2 135.25 270.5 Shuttering oil L.S 39 1 39 Carriage L.S 26 1 26 TOTAL 923.68 Add 1% for water charges 9.24 TOTAL 932.92 Add for contractors profit and overheads @ 139.94 1,500.% Cost for 4.5 sqm. 1,072.86 Cost per sqm. 238.41 Say 238.4
4.4 4.4.1 Code
Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centring, shuttering and finishing. 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). Discription Unit Details of cost for kerb : 100m long 20cm deep and 30cm wide ). 100m x 30m x 0.20m = 6.00 cum. Cement 1:2:4 cum (Rate as per item no 4.1.3 Cost for 6 cum. Cost per cum. Say Quantity Rate Amount
6.00
4378.20 26269.20 26269.20 4378.20 4378.20
4.4 4.4.2 Code
Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centring, shuttering and finishing. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). Discription Unit Quantity Rate Amount
Details of cost for kerb : 100m long 20cm deep and 30cm wide ). 100m x 30m x 0.20m = 6.00 cum. Cement concrete 1:3:6 (Rate as per item no 4.1.5 Cost for 6 cum. Cost per cum. Say
cum
2,791.05
16,746.3 16,746.3 2,791.05 2,791.05
4.5
4.5.1 Code
Providing and fixing upto floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc. including hoisting and setting in position with cement mortar 1:3 (1 Cement: 3 coarse sand), cost of required centring, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 Cement: 3 fine sand) 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size). Discription Unit Details of cost for Plain window sill 15 nos. 15x1m x 0.20m x 0.15m = 0.45cum. Materials : Cement concrete 1:2:4 (A) (Rate as per Item No. 4.2.3 ) cum Centering and shuttering (1) Mould (i) Plate 3mm thick(2x1xO.15)+(2xO.15xO.2O) = 0.36 sqm. @ 23.55kg/m2 = 8.48 kg. (ii) Flat 10x5mm 4x1.0 = 4.0m 8x0.2 = 1.6m 4x0.15 = 0.60m Handle 2x0.25 = 0.5m =6.70 m @ 0.4kg/m = 2.68 kg. Total = 11.16kg. or 0.112 qtl. Assuming shuttering will become unserviceable after use of 40 times and taking 75% credit. Qty taken for cost of using once = (B) 0.112x0.75/40 = 0.0021 qtl kg (Rate as per item no.10.1 S.H. steel work) 2. Moulding Platform Assuming platform will become unserviceable after use of 40 times, (i) Brick on edge flooring cement mortar 1-:6 1x2.0x2.0m = 4 sqm. Qty taken for cost of using once = 4/40 = 0.1 sqm (C) Rate as per item no. 11.1.2 (S.H.: Flooring sqm work) (ii) 25mm thick cement concrete 1:2:4 in pavement 2.00x2.00x0.025 = 0.10cum Qty taken for cost of using once = 0.100/40 = 0.0025 cum (D) Rate as per item no. 16.42 (Road work) cum Finishing 15x0.50 = 7.50sqm. (E) Rate as per item No. 13.16.1 sqm (G) Mortar and labour for hoisting and finishing.S L TOTAL (H) Add for water charges @ 1 % on (G) TOTAL Add for contractors profit and overheads @ 15%on(G+H) Cost for 0.45 cum. Cost per cum. Say Quantity Rate Amount
0.45
4921.38
2214.62
0.21
59.90
12.58
0.10
435.85
43.59
0.0025
4366.16
10.92
7.50 36.30
100.23 1.49
751.74 54.09 3087.53 0.54 3088.07 8.19 3096.26 6880.59 6880.59
4.5
4.5.2 Code
Providing and fixing upto floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc. including hoisting and setting in position with cement mortar 1:3 (1 Cement: 3 coarse sand), cost of required centring, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 Cement: 3 fine sand) on exposed surfaces complete. 1:3:6 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size). Discription Unit Quantity Rate Amount Details of cost for Plain window sill 15 nos. 15x1m x 0.20m x 0.15m = 0.45cum. Materials : Cement concrete 1:3:6 (A) (Rate as per Item No. 4.2.5 ) of (S.H concrete work Centering and shuttering (1) Mould (i) Plate 3mm thick (2x1x0.15)+(2x0.15x0.20) = 0.36 sqm. @ 23.55kg/m2 = 8.48 kg. (ii) Flat 10x5mm 4x1.0 = 4.0m 8x0.2 = 1.6m 4x0.15 = 0.60m Handle 2x0.25 = 0.5m =6.70m@ 0.4kg/m = 2.68 kg. Total = 11.16kg. or 0.112 qtl. Assuming shuttering will become unserviceable after use of 40 times and taking 75% credit. Qty taken for cost of using once = 0.112x0.75/40 = 0.0021 qtl (B) (Rate as per item no.10.1 S.H.kg steel work) 2. Moulding Platform Assuming platform will become unserviceable after use of 40 times, (i) Brick on edge flooring cement mortar1:6 1x2.0x2.0m = 4 sqm Qty taken for cost of using once = 4/40 =0.1 sqm (C) Rate as per item no. 11.1.2 (SH: Flooring sqm work) (ii) 25mm thick cement concrete 1:2:4 in pavement 2.00 x2.00x0.025 = 0.1 Qty taken for cost of using once = 0.100/40 = 0.0025 cum (D) Rate as per item no. 16.42 (Road work) cum Finishing 15x0.50 = 7.50sqm. (E) Rate as per item No. 13.16 sqm (G) Mortar and labour for hoisting L.S finishing and TOTAL (H) Add for water charges @ 1 % on (G) TOTAL Add for contractors profit and overheads @ 15%on(G+H) Cost for 0.45 cum. Cost per cum. Say
cum
.45
3,112.7
1,400.72
.21
42.15
8.85
.1
296.2
29.62
.0025
3,688.55
9.1
7.5 36.3
62.15 1
466.13 36.3 1,950.71 .36 1,951.07 5.5 1,956.57 4,347.93 4,347.95
4.6
Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement: 3 coarse sand) including the cost of required centring, shuttering and finish-
4.6.1 Code
9999
ing smooth with 6mm thick cement plaster 1:3 (1 cement: 3 fine sand) on exposed surfaces complete. 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size). Description Unit Quantity Rate Amount Details of cost for 25 no kerbs, 40x30x20cm =25 no x 0.40m x 0.30m x 0.20m = 0.6 cum Materials : Cement concrete 1:2:4 (A) Rate as per Item Nono. 4.1.3 cum .6 3,257.45 1,954.47 Centering and shuttering (1) Mould (i) Plate 3mm thick 0.28 sqm. @ 23.55kg/m2 = 6.59 kg. (ii) Flat 10x5mm Handle 2x0.25 x0.4 = @ 0.4kg/m = 0.20 kg. = 6.79kg. or 0.068 qtl. Assuming shuttering will become unserviceable after use of 40 times and taking 75% credit. Qty taken for cost of using once = 0.068x0.75/40 = 0.001275 qtl (B) (Rate as per item no. 10.1 S.H. steel work) kg .1275 42.15 5.37 2. Moulding Platform Assuming platform will become unserviceable after use of 40 times. (i) Brick on edge flooring cement mortar 1:6 1x2.0x2.0m = 4 sqm. Qty taken for cost of using once = 4/40 = 0.1 sqm (C ) Rate as per item no. 11.1.2 S.H.: Flooring kg .1 296.2 29.62 work. (ii) 25mm thick cement concrete 1:2:4 in pavement 2.00x2.00x0.025 = 0.10 Qty taken for cost of using once = 0.100/40 = 0.0025 cum (D) (Rate as per item no. 16.42 (Road work) cum .0025 3,638.55 9.1 Finishing 0.4(0.3+0.2+0.20)=0.28x25 = 7.0sqm. (E) (Rate as per item no. 13.16) sqm 7 62.15 435.05 (G) Mortar and labour for finishing L.S. 30.54 1 30.54 TOTAL 2,464.15 (H) Add for water charges @ 1% on (G) .31 TOTAL 2,464.46 Add for contractors profit and overheads @ 15%on(G+H) 4.63 Cost for 0.60 cum. 2,469.09 Cost per cum. 4,113.15 Say 4,115.15
4.7
4.7.1 Code
Providing and fixing upto floor five level precast cement concrete solid block including hoisting and setting in position with cement mortar 1:3 (1 cement: 3 coarse sand), cost of required centring, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 cement: 3 fine sand) on exposed surfaces complete : 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size). Description Unit Details of cost for 25 no blocks, 40x20x30cm =25 no x 0.40m x 0.30m x 0.20m = 0.60 cum Materials: Cement concrete 1:2:4 Rate as per Item Nono. 4.1.3 cum Centering and shuttering (1) Mould Quantity Rate Amount
0.60
4378.20
2626.92
115 123 114
(i) Plate 3mm thick 0.28 sqm. @ 23.55kg/m2 = 6.59 kg. (ii) Flat 10x5mm Handle 2x0.25 x0.4 = @ 0.4kg/m = 0.20 kg. = 6.79kg. or 0.068 qtl. Assuming shuttering will become unserviceable after use of 40 times and taking 75% credit. Qty taken for cost of using once = 0.068x0.75/40 = 0.001275 qtl (Rate as per item no. 10.1 S.H. steel work) 2. Moulding Platform Assuming platform will become unserviceable after use of 40 times, (i) Brick on edge flooring cement mortar 1:6 1x2.0x2.0m = 4 sqm. Qty taken for cost of using once = 4/40 = 0.1 sqm Rate as per item no. 11.1.2 S.H.: Flooring work. (ii) 25mm thick cement concrete 1:2:4 in pavement 2.00x2.00x0.025 = 0.10 Qty taken for cost of using once = 0.100/40 = 0.0025 cum (Rate as per item no. 16.42 (Road work) Mortar 1:3 for Fixing (D) 0.202/100x25=0.051 Rate as per item no 3.8 Extra for Labour for fixing (27/100x25=0.675 or 0.68) (D) Coolie Labour for hoisting and setting in position (D) Mason 1st class (D) Beldar Finishing 25x2(0.4x0.3) =6.0sqm. (Rate as per item no. 13.16) TOTAL (E) Add for water charges @ 1 % on (D) TOTAL Add for contractors profit and overheads @ 15%on(D+E) Cost for 0.60 cum. Cost per cum. Say
kg
0.1275
59.90
7.64
kg
0.10
435.85
43.59
cum
0.0025
4366.16
10.92
cum
0.051
4051.80
206.64
day day day
0.68 0.60 3.60
247.00 301.00 247.00
167.96 180.60 889.20
sqm
6.00
100.23
601.39 4734.85 47.35 4782.20 717.33 5499.53 9165.89 9165.89
4.7
4.7.2 Code
Providing and fixing upto floor five level precast cement concrete solid block including hoisting and setting in position with cement mortar 1:3 (1 cement: 3 coarse sand), cost of required centring, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 cement: 3 fine sand) on exposed surfaces complete : 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size). Description Unit Details of cost for 25 no blocks, 40x20x30cm =25 no x 0.40m x 0.30m x 0.20m = 0.6 cum Materials: (A) Cement concrete 1:3:6 (Rate as per Item no. 4.1.5 ) cum (B) Mortar for Fixing cement mortar 1:3 cum (Rate as per item no. 3.8) Quantity Rate Amount
.6 .051
2,791.05 3,169.6
1,674.63 161.65
115 123 114
Centering and shuttering (1) Mould (i) Plate 3mm thick. 0.28 sqm. @ 23.55kg/m2 = 6.59 kg. (ii) Flat 10x5mm Handle 2x0.25 xO.4 = @ 0.4kg/m = 0.20 kg. = 6.79kg. or 0.068 qtl. Assuming shuttering will become unserviceable after use of 40 times and taking 75% credit. Qty taken for cost of using once = 0.068x0.75/40 = 0.001275 qtl (Rate as per item no.10.1 S.H. steel work) kg 2. Moulding Platform Assuming platform will become unserviceable after use of 40 times, (i) Brick on edge flooring cement mortar 1:6 1x2.0x2.0m = 4 sqm. Qty taken for cost of using once = 4/40 = 0.1 sqm Rate as per item no. 11.1.2 S.H.: Flooring work. sqm (ii) 25mm thick cement concrete 1:2:4 in pavement 2.00x2.00x0.025 = 0.100 Qty taken for cost of using once = 0.100/40 = 0.0025 cum (Rate as per item no. 16.42 (Roadcum work) Finishing sqm (Rate as per item no. 13.16 Extra Labour for lifting material upto floor V level (C) Labour Coolie day (C) Labour for hoisting and setting in position Mason 1st class day Beldar day TOTAL (D) Add for water charges @ 1 % on (B+C) TOTAL Add for contractors profit and overheads @ 15% on (B+C+D) Cost for 0.60 cum. Cost per cum. Say
.1275
42.15
5.37
.1
296.2
29.62
.0025 6
3,638.55 62.15
9.1 372.9
.68 .6 3.6
135.25 151.5 135.25
91.97 90.9 486.9 2,923.04 8.31 2,931.35 125.96 3,057.31 5, 095.52 5,095.5
4.8
4.8.1 Code
9999
115
Providing and fixing upto floor five level precast cement concrete hollow block including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centring, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 cement: 3 fine sand) on exposed surfaces complete : 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size). Description Unit Quantity Rate Amount Details of cost for one block of overall size 1m x 0.50m and 0.10m thick having 6 vertical hollows, 40x20x30cm finished contents = 1mx0.5mx0.1m = 0.05cum Materials: Cement concrete 1:2:4 (A) Netqty = 0.05 [6x0.5x{2x1/2(0.05+7)}x0.074] cum .023 3,257.45 74.92 = 0.023cum (Rate as per Item no. 4.1.3) (B) Centering and shuttering including T&P L.S. 26.91 1 26.91 charges, hire charges of steel mould, table vibrator, rammer, bolts nuts & washers etc. Extra for Finishing sqm 1 62.15 62.15 (Rate as per item no.13.16) (C) Extra Labour for lifting material upto floor V level Coolie day .056 135.25 7.57
123 371
4.8
4.8.2 Code
4.9
Code
(C) Labour for hoisting and setting in position Mason 1st class day .05 151.5 7.58 Beldar day .3 135.25 40.57 (D) Mortar for fixing cement mortar 1:2 cum 0.002 3,864.25 7.73 (Rate as per item No. 3.7) TOTAL 227.43 (E)) Add for water charges @ 1% on (B+C+D) .9 TOTAL 228.33 Add for contractors profit and overheads @ 13.69 15% on (B+C+D+E) Cost for 0.05 cum. 242.02 Cost per cum. 4,840.4 Say 4,840.4 Providing and fixing upto floor five level precast cement concrete hollow block including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centring, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 cement: 3 fine sand) on exposed surfaces complete : 1:3:6 (1 Cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size). Description Unit Quantity Rate Amount Details of cost for one block of overall size 1m x 0.50m and 0.10m thick having 6 vertical hollows, 40x20x30cm finished contents = lmx0.5mx0.lm = 0.05cum Materials : Cement concrete 1:3:6 (A) Net qty = 0.05 [6x0.5x{2xl/2(0.05+7)}x6.074] cum .023 2 91.05 64.19 = 0.023cum (Rate as per Item no. 4.1.5 ) (B) Centering and shuttering including T&P L.S. 26.91 1 26.91 charges, hire charges of steel mould, table vibrator, rammer, bolts nuts & washers etc. (C) Extra for Finishingsqm 1 62.15 62.15 (Rate as per item no. 13.16) (D) Extra Labour for lifting material upto floor V level Coolie day .056 135.25 7.57 (D) Labour for hoisting and setting in position Mason 1 st class day .05 151.5 7.58 Beldar day .3 135.25 40.57 (E) Mortar for fixing cement mortar 1:2 cum 0.002 3,864.25 7.73 (Rate as per item No. 3.7) TOTAL 216.7 Add for water charges @ 1% on (B+D+E) .9 TOTAL 217.7 Add for contractors profit and overheads @ 13.69 15% on(B+D+E+F) Cost for 0.05 cum. 231.29 Cost per cum. 4,625.8 Say 4,625.8 Precasting and placing in position 125 mm dia Bollards 600 mm high of required shape including providing M.S. Pipe Sleeve 50 mm dia 300 mm long in the Bollard and M.S. Pipes 40 mm dia and 450 mm long with 150xl50x6mm M.S. plate welded at bottom and embedded 150mm in cement concrete 1:3:6 (1 Cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including necessary excavation of size 250x250x450mm^deep for the same in bitumen/concrete pavement at specified spacing. Description Unit Quantity Rate Amount Details of cost for one bollard Materials : ement concrete 1:2:4 p/4x0.125x0.60 = .007cum cum .007 3 359.60 23.52 Rate as per Item no. 5.1.3 SH : RCC ) Centering and shuttering 3.14x(0.125)x0.60 = 0.24 sqm sqm .24 119.25 28.62 (Rate as per Item no. 5.9.1 SH : RCC) M.S. pipes (medium class) 50 mm dia sleeve =1x0.30x5.10=1.53 kg 40 mm dia pipe =1x0.45x3.61 =1.62 kg M.S. plate 3mm thick =(0.15x0.15)x23.55 =0.53 kg
=3.68 kg kg 3.68 42.15 155.11 (Rate as per Item no. 10.1 SH : Steel work) Excavation 0.25x0.25x0.45 = 0.03 cum cum .03 103.4 3.1 (Rate as per Item no. 2.8.1 SH : Earth work) Cement concrete 1:3:6cum .03 2 791.05 83.73 (Rate as per Item no. 4.1.5 SH : Cement concrete) 6 mm rendering (1:3) (0.24+0.01) = 0.25 sqm sqm .25 62.15 15.54 (Rate as per Item no.5.53 : RCC) Carriage and fixing charges L.S. 13 1 13.00 (A) TOTAL 322.62 Add for water charges @ 1 % on (A) 0.13 (B) TOTAL 322.75 Add for contractors profit and overheads @ 1.97 15% on (A+B) Cost for one bollard 324.72 Say 324.7 4.10 Code Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size). Description Unit Quantity Rate Amount Details of cost for 10 sqm Cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) 10x0.040 = 0.40 cum Rate for Cement concrete 1:2:4 (1 cement: 2 cum 0.40 4378.20 1751.28 coarse sand : 4 graded stone aggregate 20 mm nominal size) (As per item no 4.1.3) Add Dedut for diffence of cost between 20mm Size and 12.5mm size cum 0.67 0.00 0.00 Add for delay: (A) Mason 1st class day 0.40 301.00 120.40 (A) Mason 2nd class day 0.40 273.00 109.20 (A) Sundries (Form work etc.) L.S. 1.95 1.49 2.91 TOTAL 1983.79 (B) Add for water charges @ 1% on (A) 2.33 TOTAL 1986.11 Add for contractors profit and overheads @ 35.22 15% on (A+B) Cost for 10 sqm 2021.34 Cost for 1 sqm 202.13 Say 202.13
123 124 9999
4.11 Code
123 124 9999
Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size). Description Unit Quantity Rate Amount Details of cost for 10sqm. Materials : Cement concrete 1:2:4 = 10x0.05 cum cum 0.50 = 0.50 3,257.45 1 628.72 (Rate as per item no. 4.1.3) Add for delay : (A) Mason 1st class day .4 151.5 60.6 (A) Mason 2nd class day .4 141.6 56.64 (A) Sundries (Form work etc.) L.S. 13.52 1 13.52 TOTAL 1,759.48 (B) Add for water charges @ 1 % on A 1.31 TOTAL 1,760.79 Add for contractors profit and overheads @ 19.81 15% on A+B Cost for 10 sqm. 1,780.6 Cost of 1 sqm. 178.06 Say 178.05 Extra for providing and mixing water proofing material in cement concrete work @ 1 kg per 50 kg of cement. Description Unit Quantity Rate Amount
4.12 Code
1213 9999
Details of cost for per bag of 50kg. of cement Materials : Approved water proofingmaterials accordingkg to the recommended proportions Carriage of water proofing material and labour .S. L for mixing etc. TOTAL Add for water charges @ 1% TOTAL Add for contractors profit and overheads @ 15% Cost per bag of cement of 50kg. Say
1.00 3.64
25.00 1.49
25.00 5.42 30.42 0.30 30.73 4.61
35.34 35.34
4.13
Code
Applying a coat of residual petroleum bitumen of penetration 80/100 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. Description Unit Quantity Rate Amount Details of cost for 10sqm. Materials: Paving Bitumen S-90 tonne Kerosene oil Litre Fuel (steam coal) for heating quintal Carriage of Bitumen tonne Labour: Cleaning surface and applying kerosene oil Beldar Day Heating the material-Beldar Day Spreading hot tar over damp proof Day course-Painter Sundries (Carriage of kerosene, steam coal, L.S. brushes, T&P etc.) TOTAL Add 1 % for water charges TOTAL Add 15% for contractors profit and overheads Cost for 10 sqm. Cost of 1 sqm. Say
309 771 370 2211 114 115 131 9999
0.017 1.23 0.035 0.017
37000.00 30.00 400.00 0.00
629.00 36.90 14.00 0.00
0.12 0.07 0.20 33.15
247.00 247.00 273.00 1.49
29.64 17.29 54.60 49.39 830.82 8.31 839.13 125.87 965.00 96.50 96.50
4.14 Code
115
Extra for concrete work in superstructure above floor V level for each four floors or part thereof. Description Unit Quantity Rate Amount Details of cost per cum. Extra labour element required for lifting of materials (0.75x2.00 = 1.50) Coolie Day 1.5 135.25 202.88 TOTAL 202.88 Add 1% for water charges 2.03 TOTAL 204.91 Add 15% for contractors profit and overheads 30.74 Cost for 1 cum. 235.65 Say 235.65
4.15
Extra for laying concrete in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete. Description Unit Details of cost for depth of water 0.30 m. Quantity of concrete = 14 cum. pumping hours = 3 hrs. or 0.75 day. Cost of pumping water with 3636.8 litres Day per hour capacity pump Beldar for cleaning slush Day TOTAL Add 1% for water charges TOTAL Add for contractors profit and overheads @ 1,500.% Cost of 14cum. per 0.30 m depth Cost of cum. per m depth Say Extra for laying concrete in or under foul positions. Description Unit Details of cost for 1 cum. Extra labour due to slow progressMason 1st class Day Mason 2nd class Day Beldar Day Quantity Rate Amount
Code
11 114
.375 4
300 135.25
112.5 541 653.5 6.54 660.04 99.01 759.05 180.73 180.75
4.16 Code
Quantity Rate
Amount
123 124 114
.02 .02 .25
151.5 141.6 135.25
3.03 2.83 33.81
115
Coolie Day TOTAL Add 1% for water charges TOTAL Add for contractors profit and overheads 1,500.% Cost for 1 cum. Say
.15
135.25
20.29 59.96 .6 60.56 9.08 69.64 69.65
4.17
Code
287 2260 983 2261
114 115
295 297 2202 982 2203 367 2209 114 123 101 9999 9999 155 114 115
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. Description Unit Quantity Rate Amount Detail of cost for 10 sqm Materials Brick aggregate 40 mm size cum 0.75 500.00 375.00 Carriage of brick aggregate cum 0.75 0.00 0.00 Fine sand 60 cu.dm. per 10 sqm cum 0.06 640.00 38.40 Carriage of fine sand cum 0.06 0.00 0.00 Dressing the gound including cutting and filling upto 15cm Beldar Day 0.16 247.00 39.52 Coolie Day 0.11 247.00 27.17 Cement concrete 1:3:6 Qty. of cement concrete 1:3:6 on 10 sqm. area = 0.5cum. Materials (for C.C 1:3:6) Stone aggregate 20 mm nominal size cum 0.35 1050.00 367.50 Stone aggregate 10 mm nominal size cum 0.12 1050.00 126.00 Carriage of stone aggregate cum 0.47 0.00 0.00 Coarse sand cum 0.23 1120.00 257.60 Carriage of coarse sand cum 0.23 0.00 0.00 Cement tonne 0.11 5000.00 550.00 Carriage of cement tonne 0.11 77.87 8.57 Labour (for C.C 1:3:6) Beldar Day 1.00 247.00 247.00 Mason 1st class Day 0.05 301.00 15.05 Bhisti Day 0.33 260.00 85.80 Hire and runing charges of mechanical mixer L.S. 13.39 1.49 19.95 Sundries L.S. 6.76 1.49 10.07 Labour Mason Day 0.27 287.00 77.49 Beldar Day 1.08 247.00 266.76 Coolie Day 1.08 247.00 266.76 TOTAL 2778.64 Add 1% for water charges 27.79 TOTAL 2806.43 Add 15% for contractors profit and overheads 420.96 Cost of 10.00 sqm 3227.39 Cost of 1.00 sqm 322.74 Say 322.74
SUB HEAD : 7.0 7.1 :
STONE WORK
7.1.1 : Code
1157 1154
2215
125 114 115 101 9999 9999
Random rubble masonry with hard stone in foundation and plinth including levellingup with cement concrete 1:6:12 (1 cement: 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with : Cement mortar 1:6(1 cement: 6 coarse sand) Description Unit Quantity Rate Amount Details of cost for 1 cum. Materials : Stone at quarry cum 1.00 375.00 375.00 Through and bond stones 7 nos. 100 Nos 7.00 1100.00 77.00 Carriage of stone7.00x24cmx24cmx39cm = 0.16 cum. 1 .OOcum. + 0.16 cum. = 1.16 cum. cum 1.16 0.00 0.00 Cement mortar 1:6 (1 cement: 6 Coarse sand) um c 0.33 2731.56 901.41 LABOUR Rate as per item no. 3.11 Mason 2nd class Day 1.07 273.00 292.11 Beldar Day 1.07 247.00 264.29 Coolie Day 0.71 247.00 175.37 Bhishti Day 0.09 260.00 23.40 Cement concrete 1:6:12 L.S. 45.76 1.49 68.18 Sundries L.S. 4.42 1.49 6.59 TOTAL 2183.35 Add 1% for water charges 21.83 TOTAL 2205.19 Add ,15% for contractors profit and overheads 330.78 Cost of 1 cum. 2535.96 Say 2535.96 Extra for random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at window sills, ceiling level and the like. Description Unit Quantity Rate Amount Details of cost for 1 cum. Scaffolding etc. L.S. 67.34 1.49 Labour: Labour for laying cement concrete L.S. 10.79 1.49 Mason (2nd class) Day 0.27 273.00 Beldar Day 0.38 247.00 Extra labour for lifting of materials upto floor V level-0.75xl.50= 1.13 Coolie Day 1.13 247.00 TOTAL Add 1% for water charges TOTAL Add 15% for contractors profit and overheads Cost of 1 cum. Say
7.2 :
Code 9999 9999 125 114
100.34 16.08 73.71 93.86
115
279.11 563.09 5.63 568.72 85.31 654.03 654.03
SUB HEAD : 8.0
MARBLE WORK
8.1
Marble work gang saw cut (polished and machine cut) of thickness 18mm for wall lining (veneer work) in cement mortar 1:3 (1 cement : 3 coarse sand) including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the backing by means of cramps, which shall be paid for separately). 8.1.1 Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble. 8.1.1.1 Area of slab upto 0.50 sqm Code Description Unit Quantity Rate Amount Details of cost for 0.50 sqm. Finished work = 0.50sqm.+ Add for wastage @ 20% = 0.10 sqm. Total = 0.60 sqm. Raj Nagar plain white marble (polished andqm s machine cut) 18 mm thick upto 0.50sqm Carriage of marble tonne Cement mortar 1:3 (1 Cement: 3 Coarse sand) cum Rate as per item No. 3.8 White 1:2 (1 white cement: 2 cum marble dust)( Rate as per item No.3.15 ) Labour: For fixing Stone Mason (ornamental) Day Bandhani Day Beldar Day Coolie Day Bhishti Day Mate Day Blacksmith 1st class Day Scaffolding L.S. TOTAL Add 1 % for water charges TOTAL Add 15% for contractors profit and overheads Cost for 0.50 sqm. Cost for one sqm. Say
7452 2216
0.60 0.03 0.01 0.0012
610.00 0.00 4051.80 9426.64
366.00 0.00 32.41 11.31
126 100 114 115 101 128 102 9999
0.34 0.34 0.34 0.34 0.34 0.17 0.14 13.39
301.00 260.00 247.00 247.00 260.00 260.00 301.00 1.49
100.84 87.10 82.75 82.75 87.10 42.90 40.64 19.95 953.74 9.54 963.27 144.49 1107.77 2215.53 2215.53
8.1
Marble work gang saw cut (polished and machine cut) of thickness 18mm for wall lining (veneer work) in cement mortar 1:3 (1 cement : 3 coarse sand) including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the backing by means of cramps, which shall be paid for separately). 8.1.1 Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble. 8.1.1.2 Area of slab over 0.50 sqm Code Description Unit Quantity Rate Amount Details of cost for 1.00 sqm. Finished work = 1.00sqm.+ Add for wastage @ 20% = 0.20 sqm.
7453 2216 2112
126 100 114 115 101 0 128 102 9999
Total = 1.20sqm. Raj Nagar plain white marble (Polished andqm s machine cut) 18 mm thick above 0.50 sqm Carriage of marble tonne Cement mortar 1:3 (Cement: 3 Coarse sand) cum (Rate as per item No. 3.8) whitecement mortar 1:2 (1 white cement: 2um c marble dust) (Rate as per item No. 3.13) Labour: For fixing Stone Mason (ornamental) Day Bandhani Day Beldar Day Coolie Day Bhishti Day Mate Day Blacksmith 1st class Day Scaffolding L.S. TOTAL Add 1% for water charges TOTAL Add 15% for contractors profit and overheads Cost for 1.00 sqm Say
1.2 .06 .0144
580 47.29 3,169.6
696 2.84 45.64 18.98
.0025 7,590.25
.67 .67 .67 .67 .67 .33 .27 26.91
151.5 138.45 135.25 135.25 138.45 138.45 151.5 1
101.51 92.76 90.62 90.62 92.76 45.69 40.9 26.91 1,345.23 13.45 1,358.68 203.8 1,562.48 1,562.5
DSR No 2.1.1 2.2.1 2.3.1 2.4 2.5 2.6.1 2.7.1 2.7.2 2.7.3 2.8.1 2.9.1 2.9.2 2.9.3 2.10.1.1 2.10.1.2 2.10.1.3 2.11 2.12 2.13.1.1 2.13.1.2 2.13.1.3 2.13.2.1 2.13.2.2 2.13.2.3 2.13.3 2.13.3.1 2.13.3.2 2.13.3.3 2.14 2.15 2.16 2.16.1 2.16.2 2.16.3 2.17 2.17.1 2.17.2 2.17.3 2.18 2.18.1 2.18.2 2.18.3
DSR MATERIAL/ LABOUT/ T & P

114 114 114 113 101 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 1198 1198 1198 1198 1198 1198 1198 1198 1198 115 115 115 3 18 17 17 17 18 17 17 17 18 18 18 18 18 17 17 17 17 17 17 17 17 17 17 17 1197 1197 1197 1197 1197 1197 1197 1197 1197 101 101 1235 128 132 132 132 128 132 132 132 128 128 128 128 128 132 132 132 132 132 132 132 132 132 132 132 302 302 302 302 302 302 302 302 302 113 3 2342 115 133 133 133 115 133 133 133 115 115 115 115 115 133 133 133 133 133 133 133 133 133 133 133 2204 2204 2204 2204 2204 2204 2204 2204 2204 3 113 9999 1235 1235
CODE
2342 2342 9999 9999
NO
134 134 135 134 134 135 101 101 101 101 101 134 134 134 134 134 134 135 135 135 134 134 112 112 112 112 112 112 112 112 112
114 114 103 114 114 103
115 115 114 115 115 114
9999 325 115 9999 325 115
326 9999
326 9999
114 114 114 114 114 114 114 103 103 103 114 114 114 114 114 114 114 114 114 114 114 115 115 115 115 115 115 114 114 114 115 115 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 325 325 325 115 115 115 325 325 115 115 115 326 326 326 9999 9999 9999 326 326
2.19 2.20 2.20.1 2.20.2 2.20.3 2.21 2.21.1 2.21.2 2.21.3 2.22 2.22.1 2.22.2 2.22.3 2.23 2.24 2.24.1 2.24.2 2.25 2.26 2.26.1 2.26.2 2.27 2.28 2.28.1 2.29 2.29.1 2.3 2.30.1 2.30.2 2.30.3 2.30.4 2.31 2.32 2.33 2.33.1 2.33.2 2.33.3 2.33.4 2.34 2.34.1 2.35 2.35.1 2.35.1.1
1198 1198 1198 1198 1198 1198 1198 1198 1198 1198 1198
1197 1197 1197 1197 1197 1197 1197 302 302 302 1197
302 302 302 302 302 302 302 2204 2204 2204 302
2204 2204 2204 2204 2204 2204 2204 112 112 112 2204 112 112 112 112 112 112 114 114 114 114 114 114 114 114 114 9999 9999 9999 9999 9999 9999 9999 9999 9999
128 128 128 6501 114 114 20 20 20 20 114 114 114 114 114 114 7022
115 114 114 2335 115 101 18 17 17 17 115 115 115 115 115 115 2342
101
114
115
101
128 132 132 132 9999 9999 9999 9999 9999
115 133 133 133
9999 134 134 135
114 114 103
115 115 114
9999 325 115
9999 9999
7022
114
9999
2.35.2 2.35.2.1 2.35.3 2.35.3.1 2.35.4 2.35.4.1 2.35.5 2.36 3 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15 3.16 3.17 3.18 4.1 4.1.1 4.1.2 4.1.3 4.1.4 4.1.5 4.1.6 4.1.7 4.1.8 4.1.9 4.1.10 4.1.11 4.1.12 4.1.13 4.2 4.2.1
7022 7022 7022 771 128 367 367 367 367 367 367 367 367 367 367 367 367 367 367 368 368 368 811 295 295 295 293 295 293 293 293 293 293 293 293 293 295
114 114 114 112 115 2209 2209 2209 2209 2209 2209 2209 2209 2209 2209 2209 2209 2209 2209 2209 2209 2209 114 297 297 297 295 297 295 295 295 295 295 295 295 295 297
9999 124 124 114 9999 9999 9999
983 983 983 983 983 983 982 982 982 982 982 1159 784 784 784 784 784 101 2202 2202 2202 297 2202 2206 2206 2206 2206 2206 2206 2206 2206 2202
2261 2261 2261 2261 2261 2261 2203 2203 2203 2203 2203 2267 2268 2268 2268 2268 2268 9999 982 982 982 2206 982 2202 2202 2202 2202 2202 2202 2202 2202 982
114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114
101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101
9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999
9999
2203 2203 2203 2202 2203 982 982 982 983 982 983 982 982 2203
367 367 367 982 367 2203 2261 2261 2261 2203 2261 2203 2203 367
2209 2209 2209 2203 2209 367 367 367 367 367 367 1980 1980 2209
155 155 155 367 155 2209 2209 2209 2209 2209 2209 2262 2262 114
114 114 114 2209 114 155 155 155 155 155 155 367 367 115
4.2.2 4.2.3 4.2.4 4.2.5 4.2.6 4.2.7 4.3 4.3.1 4.3.2 4.3.3 4.4 4.4.1 4.4.2 4.5 4.5.1 4.5.2 4.6 4.6.1 4.7 4.7.1 4.7.2 4.8 4.8.1 4.8.2 4.9 4.10 4.11 4.12 4.13 4.14 4.15 4.16 4.17 4.18 5 5.1 5.1.1 5.1.2 5.1.3 5.2 5.2.1 5.2.2
295 295 293 295 293 293 7319 7319 7331 295 295 295
297 297 295 297 295 295 7326 7327 7332 297 297 297
2202 2202 297 2202 2206 2206 7327 7328 7333 2202 2202 2202
982 982 2206 982 2202 2202 7328 7329 7334 982 982 982
2203 2203 2202 2203 982 983 7329 7330 9999 2203 2203 2203
367 367 982 367 2203 2261 7330 9999 116 367 367 367
2209 2209 2203 2209 367 367 9999 116 114 2209 2209 2209
114 114 367 114 2209 2209 116 114
115 115 2209 115 114 114 114
155 155 114
114 114 115
295 295 1213 309 115 11 123 287 8733 124 2260 771
297 297 370 114 114 983
2202 2202 9999 2211
982 982
2203 2203
367 367 114
2209 2209 115
155 155 131
114 114
115 2261
114
115
295
297
2202
295 295 295 295 295
297 297 297 297 297
2202 2202 2202 2202 2202
982 982 982 982 982
2203 2203 2203 2203 2203
367 367 367 367 367
2209 2209 2209 2209 2209
155 155 155 114 114
114 114 114 115 115
5.2.3 5.3 5.4 5.5 5.6 5.7 5.8 5.9 5.9.1 5.9.2 5.9.3 5.9.4 5.9.5 5.9.6 5.9.7 5.9.8 5.9.9 5.9.10 5.9.11 5.9.12 5.9.13 5.9.14 5.9.15 5.9.16 5.9.16.1 5.9.16.2 5.9.17 5.9.18 5.9.19 5.9.20 5.9.21 5.1 5.10.1 5.10.2 5.10.3 5.10.4 5.11 5.11.1 5.12 5.13 5.14 5.15
295 295 295 295 295 295 295
297 297 297 297 297 297 297
2202 2202 2202 2202 2202 2202 2202
982 982 982 982 982 982 982
2203 2203 2203 2203 2203 2203 2203
367 367 367 367 367 367 367
2209 2209 2209 2209 2209 2209 2209
114 155 155 155 114 155 114
115 114 114 114 115 114 115
7319 7319 1007 1007 1007 7331 1198 1007 1197 1197 7319 1198 1198 7319 1198 1198 1198 1198 1198 4202 4202 7320 732 7322 7323 7345 7319 295 295 295
7326 7327 2205 2205 2205 7332 1197 2205 302 2204 7327 1197 1197 7326 1197 1197 1197 1197 1197 9999 9999 7324 7324 7324 7324 7343 7327 297 297 297
7327 7328 116 116 116 7333 302 116 992 1225 7328 302 302 7327 2204 2204 2447 2447 2447 131 131 7325 7325 7325 7325 7330 7328 2202 2202 2202
7328 7329 103 103 103 7334 2204 103 2204 1034 7329 2204 7328 112 112 2204 2204 2204 115 115 9999 9999 9999 9999 7346 7329 982 982 982
7329 7330 114 114 114 9999 112 114 2302 2302 7330 112 7329 114 114 112 112 112 1007 1007
7330 9999 4202 4202 4202 116 114 4202 112 112 9999 114 7330 9999 9999 114 114 114 2205 2205
9999 116 9999 9999 9999 114 9999 9999 114 114 116 9999 9999
116 114 131 131 131
114 115 115 115
131 9999 9999 114
115 6302
116
114
9999 9999 9999 116 116
103 103
114 114
9999 7330 2203 2203 2203
116 9999 367 367 367
114 116 2209 2209 2209
114 114 114 155
4202 115 115 114
5.16 5.17 5.18 5.18.1 5.18.2 5.18.3 5.19 5.20 5.21 5.22 5.22.1 5.22.2 5.22.3 5.22.4 5.22.5 5.22.6 5.23 5.24 5.25 5.26 5.27 5.28 5.29 5.29.1 5.29.1.1 5.29.1.2 5.29.2 5.29.2.1 5.29.2.2 5.30 5.31 5.32 5.33 5.34 5.34.1 5.34.2 5.34.3 5.35 5.36 5.37 5.38 5.39
115 295 768 769 770 295 295 1015 1004 1224 1005 1005 1021 1005 1005 155 367 967 313 309 339
114 297 9999 9999 9999 297 297 9999 2205 2205 2205 2205 2205 2205 2205 115 2209 103 2211 2211 316
101 2202 123 123 123 2202 2202 102 9999 102 9999 9999 9999 9999 9999 101 983 9999 370 370 314
123 982 124 124 124 982 982 114 102 114 102 102 103 102 102 9999 2261 2200 2200 9999
124 2203 114 114 114 2203 2203 114 9999 114 114 114 114 114 367 114 123 367 123
128 367
9999 2209
295 155
297 114
367 367
2209 2209
155 155
114 114
1004
2209 101 124 2209 124
983 9999 114 982 114
2261 123 9999 2203
114 124
123
236 236 2391 2392 123 11 123 295 367 367 367 367 295 295 9 29
2273 2273 639 639 124 114 124 297 2209 2209 2209 2209 297 297
9999 9999 9999 9999 115 114 2202 7318 7318 7318 2202 2202
112 112 112 112 9999 115 982
114 114 114 114
2203
367
2209
7318
982 982
2203 2203
367 367
2209 2209
114 7318
115 4
6 6.1 6.1.1 6.1.2 6.2 6.2.1 6.2.2 6.3 6.3.1 6.3.2 6.4 6.4.1 6.4.2 6.5 6.6 6.7 6.8 6.9 6.10 6.11 6.12 6.12.1 6.12.2 6.13 6.13.1 6.13.2 6.14 6.15 6.16 6.16.1 6.16.2 6.17 6.18 6.19 6.20 6.21 6.22 6.23 6.24 6.25 6.26
2602 2602 7900 7900 7901 7902 2602 2602 37 1008 2602 2602 2602 2602 1197 2602 2602 2602 2602 37 1102 1984 1984 7904 1984 115 1984 1984 1984 2602 11 123 2602
367 367 2201 2201 2201 2201 367 367 1235 9999 367 367 367 367 2204 367 367 367 367 1235 2205 367 367 367 367 2207 2207 2207 367 114 124 2201
2209 2209 367 367 367 367 2209 2209 2205 2209 2209 2209 2209 1225 2209 2209 2209 2209 9999 2209 2209 2209 2209 367 367 367 2209 114 367
982 982 2209 2209 2209 2209 982 982 123 982 982 982 982 1034 982 982 982 982
2203 2203 982 982 982 982 2203 2203 124 2203 2203 2203 2203 2302 2203 2203 2203 2203
114 114 2203 2203 2203 2203 114 114 114 114 114 114 114 112 114 114 114 114
101 101 114 114 114 114 101 101
9999 9999 101 101 101 101 9999 9999
2201 2201 9999 9999 9999 9999 2201 2201
101 101 101 101 114 101 101 101 101
9999 9999 9999 9999 9999 9999 9999 9999 9999
2201 2201 2201 2201 6302 2201 2201 2201 2201
982 982 982 982 2209 2209 2209 982 115 2209
2203 2203 2203 2203 982 982 982 2203
114 114 114 114 2203 2203 2203 114
101 101 101 101 114 114 114 101
9999 9999 9999 9999 101 101 101 9999
2207 2207 2207 2207 9999 9999 9999 2201
982
2203
114
101
9999
6.27 6.28 6.29 6.30 6.31 6.32 6.32.1 6.32.2 6.33 6.34 6.34.1 6.34.2 6.35 6.35.1 6.35.2 6.36 6.36.1 6.37 6.38 6.39 6.40 6.41 6.42 6.42.1 6.42.2 6.43 6.44 7.1 7.1.1 7.2 7.3 7.4 7.4.1 7.4.2 7.5 7.6 7.6.1 7.7 7.7.1 7.8 7.9
7900 1986 7903 7901 7902 7008 7008 115 7737 7737 7338 7338 7736 7736 8655 115 8656 115 8658 8658 115 9999
2201 2201 2201 2201 2201 2201 2201
367 367 367 367 367 367 367
2209 2209 2209 2209 2209 2209 2209
982 982 982 982 982 982 982
2203 2203 2203 2203 2203 2203 2203
114 114 114 114 114 114 114
101 101 101 101 101 101 101
9999 9999 9999 9999 9999 9999 9999
367 367 367 367 367 367 367 8657
2209 2209 2209 2209 2209 2209 2209 9999
982 982 982 982 982 983 982 123
2203 2203 2203 2203 2203 2261 2203 114
114 114 114 114 114 114 114
101 101 101 101 101 101 101
9999 9999 9999 9999 9999 9999 9999
2201 2201 2201 2201 2201 2201 2208
367 367 2602
2209 2209 2201
982 982 367
2203 2203 2209
114 114 983
101 101 2261
9999 9999 114
2201 2201 101
1157 9999 114 125 1157 1157 367 367 9999 114
1154 125
2215 114
367 115
2209
982
2203
114
101
115 2215 2215 2209 2209 125
125 125 982 982 114
115 115 2203 2203 115 114 114 101 101 9999 9999 1157 1157 1154 1154
7.10 7.10.1 7.10.2 7.11 7.12 7.12.1 7.12.1.1 7.12.1.2 7.12.2 7.12.2.1 7.12.2.2 7.13 7.13.1 7.13.2 7.14 7.14.1 7.14.2 7.15 7.15.1 7.15.1.1 7.15.1.2 7.15.2 7.15.2.1 7.15.2.2 7.16 7.17 7.17.1 7.18 7.19 7.20 7.20.1 7.20.2 7.21 7.21.1 7.21.2 7.22 7.23 7.23.1 7.23.1.1 7.23.1.2
125 1157 1157
115 2215 2215
125 125
115 115
1160 1161 1160 1161 1160 1161 1160 1161
2216 2216 2216 2216 2216 2216 2216 2216
115 115 115 115 115 125 125 125
125 125 125 125 125 102 102 102
102 102 102 102 102 114 126 126
114 114 114 114 114 115 114 114
100 100 100 100 100 100 115 115
101 101 101 101 101 101 100 100
9999 9999 9999 9999 9999 9999 101 101
1160 1160 1161 1161 114 9999 9999 1197 1160 1161 9999 9999 125
2216 2216 2216 2216
125 115 125 115
102 125 102 125
114 102 114 102
115 114 115 114
100 100 100 100
101 101 101 102
9999 9999 9999 9999
2204 2216 2216
1225 9999 9999
1034 125 125
2302 102 102
112 114 114
114 115 115
9999 100 100
6302 101 101
114
1160 1160
2216 2216
9999 9999
125 125
102 102
114 114
115 115
101 101
100 100
7.23.1.3 7.23.1.4 7.23.1.5 7.23.2 7.23.2.1 7.23.2.2 7.23.2.3 7.23.2.4 7.23.2.5 7.23.3 7.23.3.1 7.23.3.2 7.23.3.3 7.23.3.4 7.23.3.5 7.23.4 7.23.4.1 7.23.4.2 7.23.4.3 7.23.4.4 7.23.4.5 7.24 7.25 7.26 7.27 7.28 7.28.1 7.28.1.1 7.28.2 7.28.2.1 7.29 7.29.1 7.29.2 7.30 7.31 7.32 7.32.1 7.32.2 7.33 7.33.1 7.33.2 7.34 7.35
1160 1160 1160 1160 1160 1160 1160 1160 1161 1161 1161 1161 1161 1161 1161 1161 1161 1161 9999 7339 9999 873
2216 2216 2216 2216 2216 2216 2216 2216 2216 2216 2216 2216 2216 2216 2216 2216 2216 2216 9999 367 9999
9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 367 2209 367
125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 2209 982 2209
102 102 102 102 102 102 102 102 102 102 102 102 102 102 102 102 102 102 982 2203 982
114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 2203 114 2203
115 115 115 115 115 115 115 115 115 115 115 115 115 115 115 115 115 115 114 101 114
101 100 101 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 101 101
1237 101 100 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101
1164 1165 1164 1165 1166 1160 1160 1161 1164 1165 11 123
2216 2216 2216 2216 2216 2216 2216 2216 2216 2216 114 124
125 125 125 125 9999 125 115 115 125 125 114
1002 1002 9999 9999 125 102 125 125 114 114 115
9999 9999 114 114 114 114 102 102 9999 9999
367 367
2209 2209
1159 1159
2267 2267
115 114 114
100 100 100
373 101 101
101 9999 9999
7.36 7.37 7.37.1 7.37.1.1 7.38 7.38.1 7.38.1.1 7.38.1.2 7.39 7.4 7.40.1 7.40.2 7.41 7.42 8 8.1 8.1.1 8.1.1.1 8.1.1.2 8.2 8.2.1 8.2.1.1 8.2.1.2 8.2.2 8.2.2.1 8.2.2.2 8.3 8.3.1 8.3.2 8.4 8.5 8.6 8.7 8.7.1 8.7.2 8.8 8.8.1 8.8.1.1 8.8.1.2 8.8.1.3 8.9 8.9.1
1165
1163
2216
1237
367
2209
982
2203
114
1169
2216
367
2209
982
2203
114
101
9999
2750 7439 9999
9999 9999 11
367 367
2209 2209 123
982 982 114
2203 2203 101
114 114 9999
101 101
9999 9999
8683 8684 4009 8698
1237 1237 1007
297
16 16 2202
9999 9999 982
9999 9999 2203 103
9999 9999 367 124
126 126 2209 114
114 114 155 9999
7452 7453
2216 2216
367 2112
2209 367
982 2209
2203 784
114 2268
101 114
7452 7453 7295 7297 19 19 123 126 13 7338 7339 367 367 114 114 115 114 114 9999 9999
367 367 2209 2209 9999 9999 9999 9999 101 367 367
2209 2209 982 982
982 982 2203 2203
2203 2203 114 114
114 114 101 101
101 101 9999 9999
9999 9999
367 9999 2209 2209
2209
982
2203
114
101
982 982
2203 2203
114 114
101 101
9999 9999
7430 7431 7432
1034 1034 1034
116 116 116
114 114 114
9999 9999 9999
8.9.1.1 8.9.1.2 8.10 8.10.1 8.10.2 9 9.1 9.1.1 9.1.2 9.1.3 9.2 9.3 9.3.1 9.3.2 9.4 9.4.1 9.4.2 9.4.3 9.5 9.5.1 9.5.1.1 9.5.1.2 9.5.2 9.5.2.1 9.5.2.2 9.6 9.6.1 9.6.2 9.6.3 9.7 9.7.1 9.7.2 9.7.3 9.7.3.1 9.7.3.2 9.7.4 9.7.4.1 9.7.5 9.7.5.1 9.7.5.2 9.7.5.3 9.7.5.4
2751 2750 7244 7245
9999 9999 9999 9999
367 367 9999 9999
2209 2209
982 982 9999 9999
2203 2203
114 114
101 101
9999 9999
1189 1199 2466 7157 1199 2466 1189 1199 2466
2204 2204 2204 2204 2204 2204 2204 2204 2204
156 156 2504 111 112 9999 156 156 9999
114 114 9999 112 114 114 9999 112 114 156
156
114
2504
114
9999
114
2504
114
1190 1190 2505 2505 7137 7137 7137 1190 2505 2480 2481 2483 341 7468 7477 7480
2204 2204 2204 2204 9999 9999 9999 2204 2204
595 595 2504 2504 9999 9999 595 595 595 111 9999
597 597 595 595 597 597 597 9999 111 111 111 111 111 111 9999 111 9999 9999 111 9999 9999 9999 9999
637 637 597 597 637 637 637
640 640 637 637 640 640 640
2504 9999 9999 9999
9999
9999 9999 9999
9999
9.8 9.8.1 9.9 9.9.1 9.9.1.1 9.9.1.2 9.9.2 9.9.2.1 9.9.2.2 9.1 9.10.1 9.11 9.11.1 9.12 9.13 9.14 9.15 9.15.1 9.15.1.1 9.15.2 9.15.2.1 9.16 9.16.1 9.16.1.1 9.16.2 9.16.2.1 9.17 9.17.1 9.17.2 9.18 9.18.1 9.18.2 9.19 9.19.1 9.19.1.1 9.19.2 9.19.2.1 9.2 9.20.1 9.20.2 9.20.3 9.21 9.21.1
7555
9999
111
9999
1190 1190 2505 2505 7151 2407 7032 7451 8220
2406 2406 2504 2504
595 595 9999 9999 9999 2406 2406
597 597 595 595 595
637 637 597 597 597
640 640 640
2204 2204 640 637 637
2406 2406 2406 8218 8211 8214 595 597
8220 595 597
8218 637 640
8211
8214
1190 1190 341 7055 7478 7479
2204 2204 9999 9999 9999 9999
2406 608 9999 9999 112 112 639
694 2204 112 112 114 114 114 114 9999 9999
586 156 119
111 114
1190 1190 713 714 715 717
2204 2406 9999 9999 9999 9999
596 595 8220 8220 608
638
2406 597 8211 8211
156 637
114 640 156 156 156
119 2204 114 114 114 156
639 8220 8211
9.21.2 9.21.3 9.21.A 9.21.A.1 9.22 9.22.1 9.23 9.24 9.24.1 9.24.2 9.25 9.25.1 9.26 9.27 9.27.1 9.27.2 9.28 9.28.1 9.28.2 9.29 9.29.1 9.29.2 9.30 9.30.1 9.30.2 9.31 9.31.1 9.31.2 9.32 9.33 9.33.1 9.33.2 9.33.3 9.33.4 9.34 9.34.1 9.34.2 9.34.3 9.34.4 9.35 9.35.1 9.35.2 9.35.3
718 719
9999 9999
8220 608
8211 639
156 156
7307 752 753 754 755 757 1190 2505 1190 2505 1190 2505 1190 2505 7154 7155 1189 7312 7313 7314 7315 1190 1190 1190 1190 7477 7478 7479 1238 1238 1231 1231 9999 9999 9999 9999 9999 9999 7029 2204 2504 9999 7029 2504 2204 2504 2204 2204 9999 7029 9999 2204 7029 2504 9999 9999 367 9999 9999 9999 9999 1189 1189 1189 1189 112 112 112 2204 2204 2204 2204 114 114 114 367 367 367 367 7048 7048 7048 2209 2209 2209 2209 983 983 983 983 823 823 823 2261 2261 2261 2261 9999 9999 9999 9999 595 595 983 597 597 114 595 8220 7029 8221 7029 597 7029 637 637 101 595 597 637 7029 8218 8220 8211 8221 637 595 640 640 9999 640 595
2204
2209
2261
9.36 9.36.1 9.37 9.37.1 9.38 9.39 9.39.1 9.39.2 9.40 9.40.1 9.40.1.1 9.40.1.2 9.40.2 9.40.2.1 9.40.2.2 9.41 9.41.1 9.42 9.42.A 9.43 9.44 9.44.1 9.44.2 9.45 9.46 9.46.1 9.46.2 9.46.3 9.47 9.47.1 9.47.2 9.48 9.48.1 9.48.2 9.49 9.50 9.51 9.51.1 9.51.2 9.52 9.53 9.54 9.54.1
2505 759 7552 7478 7479
2204 9999 9999 9999 9999
111 1189 1189 7048 7048
114 2204 2204 9999 9999
9999 367 367
7048 2209 2209
9999 983 983 2261 2261 112 112
823 114 114 114 114
1190 1190 2505 2505 1190 7055 7055 7556 347 348 7049 590 591 592 7042 7043 1003 1003 1015 1021
2204 2204 2204 2204 2204
637 637 637 637
111 111 823 823 111 112
823 823 9999 9999 114
9999 9999 9999 9999 130
9999 9999 131 131 9999
131 131 115 115
7553
7034
7035
112
114 1189 1189 1189 7048 7048 2205 2205 2204 2204 2204 9999 9999 9999 9999 9999 9999 1190 1190 1190 7349 9999 9999 2204 2204 2204 2204 114 9999 295 367 367 367 2209 2209 2209 983 983 983
7023 9999 9999 7023 9999 9999 7023 9999 9999 7035 7036 9999 9999 9999 9999 1008 1008
7048 9999 9999
9999
7029 9999 7029 9999 1021 2406 1008 1199 2204 9999 kg 9999 0.672 = 0.0067 qunital 112 114 100 103 9999
123 859
9.54.2 9.55 9.55.1 9.55.2 9.55.3 9.55.4 9.56 9.56.1 9.56.2 9.56.3 9.56.4
2466 594 595 596 597 8222 8223 8224 8225
2204 635 637 638 640
0112 9999 9999 9999 9999 635 637 638 640
0114 Carpenter 2nd class 9999 0100 Beldar Bandhani 859 112 112 112 112 9999 9999 9999 9999 114 114 114
9999
112 112 112 112
114 114 114 114
9.57 9.57.1 9.57.2 9.57.3 9.57.4 9.58 9.58.1 9.58.2 9.58.3 9.58.4 9.59 9.59.1 9.59.2 9.59.3 9.6 9.60.1 9.60.2 9.60.3 9.61 9.61.1 9.61.2 9.61.3 9.62 9.62.1 9.62.2 9.63 9.63.1 9.63.2 9.63.3 9.63.4
653
682
9999
112
114
666 667
684 684
9999 9999
112 112
9.64 9.65 9.65.1 9.65.2 9.66 9.66.1 9.66.2 9.66.3 9.67 9.67.1 9.67.2 9.67.3 9.68 9.68.1 9.68.2 9.68.3 9.69 9.70 9.70.1 9.70.2 9.70.3 9.70.4 9.71 9.71.1 9.71.2 9.71.3 9.72 9.72.1 9.72.2 9.72.3 9.72.4 9.72.5 9.72.6 9.72.7 9.73 9.73.1 9.73.2 9.73.3 9.73.4 9.74 9.74.1 9.74.2
2449
9999
112
668
685
9999
112
7063 7065 7065 7184 8215 8216 8217 8218 8219 8520 8821
684 685 685 685 8210 8211 8212 8214 8210 8211 8212
9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999
112 112 112 112 112 112 112 112 112 112 112 114 114 114 114 114 114 114
400 401
451 451
9999 9999
111 111
9.74.3 9.74.4 9.75 9.75.1 9.75.2 9.76 9.77 9.78 9.79 9.79.1 9.79.2 9.79.3 9.79.4 9.8 9.81 9.81.1 9.81.2 9.81.3 9.82 9.83 9.84 9.85 9.86 9.86.1 9.86.2 9.86.3 9.87 9.87.1 9.87.2 9.87.3 9.88 9.89 9.9 9.90.1 9.90.2 9.90.3 9.90.4 9.91 9.92 9.92.1 9.92.2 9.92.3
402
451
9999
111
413
111
9999
2456 7060 423 424
451 452 451
451 9999 9999 9999
9999 112 111 111
112
9.93 9.94 9.94.1 9.94.2 9.94.3 9.95 9.95.1 9.95.2 9.95.3 9.95.4 9.95.5 9.95.6 9.95.7 9.95.8 9.96 9.96.1 9.96.2 9.97 9.97.1 9.97.2 9.97.3 9.97.4 9.97.5 9.98 9.99 9.100 9.100.1 9.100.2 9.100.3 9.1 9.101.1 9.101.2 9.1 9.1 9.1 9.11 9.105.1 9.105.2 9.105.3 9.105.4
569 570
588 588
9999 9999
111 111
691
586
9999
111
114
697 698 699 700 701 702 2464 706 703 704 705 2459 7059 2465 7001 7056
588
9999 587 587 587 587 587 9999 9999 9999 9999 9999 9999 588 9999 7003 9999 9999 9999 9999 9999 9999
111 111 111 111 111 111 112 111 111 111 111 111 9999 111 111 9999 111 9999 114
588 588 588 588 588 588
9.11 9.106.1 9.106.2 9.11 9.107.1 9.107.2 9.11 9.108.1 9.108.2 9.11 9.110 9.11 9.111.1 9.11 9.11 9.11 9.114.1 9.114.2 9.12 9.12 9.12 9.117.1 9.117.2 9.12 9.118.1 9.118.2 9.118.3 9.12 9.12 9.120.1 9.120.2 9.12 9.12 9.122.1 9.122.2 9.12 9.12 9.13 9.13 9.126.1 9.126.2 9.13 9.127.1
8719
112
114
8705 8001 8002 8706 8011 8003 8004 8707 8708
156
114 156
9999 114 9999
156 156 8100 8100
114 114
9999 156 9999 637 637 156 8100
114
9999
640 640 114
156 156 9999 637 640
114 114
9999 9999
156
8711
8100
637
640
156
114
9.127.2 9.13 9.13 9.13 9.130.1 9.130.2 9.13 9.131.1 9.13 9.13 9.133.1 9.133.1.1 9.133.2 9.133.2.1 9.133.3 9.133.3.1 10 10.1 10.2 10.3 10.4 10.5 10.5.1 10.5.2 10.6 10.6.1 10.6.2 10.6.3 10.7 10.8 10.8.1 10.8.2 10.9 10.10 10.11 10.11.A 10.12 10.13 10.14 10.14.1 10.14.2 10.14.3 10.15
7272
9999
8678
685
111
114
130
7445
7443
7444
834
9999
9999
112
1007 1007 1007
2205 1009 1007
116 103 114 823 9999 9999 1010 9999 1020 1008 2205 9999 9999 4013 116 102
973 7045 7044
974 7047 7046
975 975 975
9999 9999 9999
116 116 116
114 114 114
123 123 123
124 124 124
4014 4014 1143 1007 4006 4007 4008 4011
2406 7027A 1002 7027 7027 7027 1002 2406 1008 1007 1007 1007 1008 595 9999 9999 9999 9999 9999 297 1143 103 102
9999
102 123 124 114 116 116 116 982 114 114 114 2203
123 114 295 9999 9999 9999 367
116
295
2202
10.16 10.16.1 10.16.2 10.16.3 10.17 10.17.A 10.18 10.18.A 10.19 10.20 10.21 10.22 10.25 10.25.1 10.25.2 10.26 10.26.1 10.26.2 10.26.3 11 11.1 11.1.1 11.1.2 11.2 11.3 11.3.1 11.4 11.5 11.6 11.6.1 11.7 11.8 11.9 11.9.1 11.9.2 11.9.3 11.9.4 11.9.5 11.9.6 11.1 11.10.1 11.10.2
4009 4010 4011 1003 1003 4012 4012 1035 1034 1020 1214 1007 1008 4009 4011 1549
2205 2205 2205 103 103
4202 4202 4202 114 114
9999 9999 9999 9999 9999
9999 9999 9999
131 131 131
115 115 115
1010 2205 2205 103 116 9999 1003 1002 1215 1215 1215 2205 2205
103 114 139
1002 1002 9999 9999 9999
103 103
114 114
1010 9999 2205 2205 2271
2271 1215
1549
102 102 114 114 114
114 114 100 100 100
100 100 9999 9999 9999
102 102 102
295 295 297
297
2202 2202 982
982 2203
2203 298
367
2209 2202 367
124 367
114
124
114
101
9999
295
297
2202
982
2203
875 874
874 296
296 297
297 2202
2202 982
982 2203
11.10.3 11.10.4 11.10.5 11.10.6 11.11 11.11.1 11.11.2 11.11.3 11.11.4 11.11.5 11.11.6 11.12 11.12.1 11.12.1.1 11.12.1.2 11.12.1.3 11.12.1.4 11.12.1.5 11.12.1.6 11.13 11.13.1 11.14 11.15 11.15.1 11.16 11.16.1 11.16.2 11.16.3 11.16.4 11.17 11.18 11.18.1 11.18.2 11.18.3 11.18.4 11.19 11.19.1 11.19.2 11.19.3 11.19.4 11.20 11.20.1
875
874
785
2268
367
2209
784
874
367
2209
114
2710
368
784
875
785
2268
7070
9999
367
368
2209
875
11.20.2 11.20.3 11.20.4 11.21 11.21.1 11.21.1.1 11.21.2 11.21.2.1 11.22 11.22.1 11.22.1.1 11.23 11.23.1 11.23.2 11.23.3 11.23.4 11.23.5 11.23.6 11.24 11.25 11.26 11.26.1 11.27 11.28 11.28.1 11.28.2 11.29 11.29.1 11.29.2 11.3 11.30.1 11.30.2 11.31 11.32 11.33 11.33.1 11.33.2 11.34 11.35
7236
9999
367
2209
7071
367
9999
6010
367
9999
123
114
115
139
13
367
1168 1168
2216 2216
367 367 2209 874
2209 124
982 114
2203 115
114 139
101
11.36 11.37 11.38 11.39 11.40 11.41 11.41.1 11.41.2 11.41.3 11.41.4 11.42 11.43 12 12.1 12.1.1 12.1.2 12.1.3 12.2 12.2.1 12.2.2 12.2.3 12.3 12.3.1 12.3.2 12.3.3 12.4 12.4.1 12.4.2 12.5 12.5.1 12.6 12.6.1 12.7 12.7.1 12.7.2 12.8 12.9 12.10 12.11 12.12
7800 7801 7802 7803 7804
9999 9999 9999 9999 9999
9999 9999 9999 9999 9999
367 367 367 367 367
123 123 123 123 123
115 115 115 115 115
8621
367
123
115
101
367
2209
982
2203
3050 3050 3050 102 102 102 102 102 102 102 992 992 992 992 992 992 223 111 111 1008
2302 2302 2302 114 114 114 114 114 114 114 2302 2302 2302 2302 2302 2302
1022 1022 1022
1023 1023
1023 1207 1207
1207 1208 1208
1208 9999 9999
9999 9999 9999
222 222 222 222 1008 1008 1022 1022
1211 1211 1211 1207 1024 1024
1208 1208 1208 1208
9999 9999 9999 9999 1210 1210 2273
9999 9999 9999 9999 1208 1208 1023
114 114 2205
9999
102
114
12.12.1 12.12.2 12.12.3 12.12.4 12.13 12.13.1 12.13.2 12.13.3 12.13.4 12.13.5 12.13.6 12.13.7 12.13.8 12.14 12.15 12.15.1 12.16 12.16.1 12.17 12.17.1 12.18 12.19 12.19.1 12.20 12.21 12.21.1 12.22 12.23 12.23.1 12.23.1.1 12.23.2 12.23.2.1 12.24 12.24.1 12.24.1.1 12.24.2 12.24.2.1 12.24.3 12.24.3.1 12.25 12.25.1 12.26
225 226 224 227
9999 9999 9999 9999
9999 9999 9999 9999
130 130 130 130
112 112 112 112
114 114 114 114
228 229 230 231 232 233 234 235 1008 309 811 811 811 1984 7266 291 295
9999 9999 1023 1023 222 9999 9999 1025 771 2131 2131 114 2207 2207 1023 1031
1209 1209 1211 1209 1024
1208 1208 1208 1208
9999 9999 9999 9999 9999 9999 1032 1210 2203
130 130 9999 9999 9999 9999 9999 1208 102 114 308 308 9999 9999
112 112 130 130
130 1210 114
370
2211
982
9999 9999
101 1213 1213 2202 2202
9999 124 123 982 982 115 114 2203 2203 101 9999 367 367 9999 367 2209 2209 114 114 115 115 367 2209
297
1174 1175
2216 2216
983 983
2261 2261
155 155
100 100
115 115
101 101
9999 9999
332 328 336 341
9999 9999 9999 9999
9999 9999 9999 9999
111 111 111 111
114 114 114 114
9999 9999 9999 9999
9999 9999 9999 9999
12.26.1 12.27 12.27.1 12.27.2 12.27.2.1 12.27.3 12.27.3.1 12.27.4 12.27.4.1 12.27.5 12.27.5.1 12.27.5.2 12.28 12.29 12.30 12.31 12.31.1 12.31.2 12.32 12.33 12.34 12.35 12.36 12.36.1 12.36.2 12.37. 12.37.1 12.37.2 12.38 12.38.1 12.38.2 12.39 12.39.1 13.39.2 12.40.1 12.41 12.41.1 12.41.2 12.42 12.42.1 12.42.1.1 12.42.1.2 12.42.2
236 1190 332 328 336 994 996 111 7267 7385 1196 1196 2204 9999 9999 9999 9999 9999 112
9999 637 9999 9999 9999 9999 9999 114 9999 7386 1219 1219 2308
9999 111 111 111 111 111 111 9999
111 112 114 114 114 114 114 111
114 114 9999 9999 9999 9999 9999 114
9999 9999 9999 9999 9999 9999 9999 9999
9999 9999 111 111 111 111 111 9999
7232 7231 7090 7091 3004
2204 2204 869 9999 9999
1220 1220 122 9999
869 869 122 114
9999 314 14 9999 9999 9999 9999 111 124
2308 2308 114 101 111 111 111 114 114
9999 9999 101 114 114 114
111 111 9999
9999
1331 886 865 865 966 7188 7189
9999 9999 1001 1001 9999 7190 7191 9999 9999
9999 9999 9999 9999
116 116 116 116
124 124 117 117
114 114 114 114
295 295
9999 9999
9999 9999
116 116
114 114
100 100
9999 9999
7192 7193
7190 7191
9999 9999
9999 9999
12.42.2.1 12.42.2.2 12.42.3 12.42.3.1 12.42.3.2 12.42.4 12.42.4.1 12.42.4.2 12.42.5 12.42.5.1 12.42.5.2 12.42.6 12.42.6.1 12.42.6.2 12.43 12.43.1 12.43.2 12.44 12.45 12.45.1 12.46 12.47 12.47.1 12.47.2 12.48 12.49 12.50 12.51 12.51.1 12.51.2 12.51.3 12.51.4 12.51.5 12.51.6 12.52 13 13.1 13.1.1 13.1.2 13.2 13.2.1 13.2.2 13.3
7194 7195 7198 7199 7196 7197 7208 7209 7212 7213 7214 7214 7187 7009 7857 8668 8667 8670 8669 8671 8672 8673 8675 8676 8677 8674 8611
7190 7191 7190 7191
9999 9999 9999 9999 7190 7191
9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 116 116 124 124 114 114 9999 9999 9999 9999
7190 7191 7190 7191 9999 9999 9999 7010 9999 9999 9999 2207 2207
9999 9999 9999 9999 870 870
7011
7012
7013
7014
1022
7015
7020
1022 1022
9999 9999 9999 9999 222 1023 9999 8612
1023 1023 123 123 1023 9999 9999 9999 1208 1208 1022 8614
1207 1207 114 114 1208
1208 1208 9999 9999 1209 130 130 130
9999 9999
9999 9999
9999 112 112 112 9999
9999 114 114 114 130 1210 8618
1211 1209 1008 8613
9999 9999 8615
9999 1024 8616
8617
1023 130 112 1208 9999
367 367 367 367
2209 2209 2209 2209
983 983 983 983
2261 2261 2261 2261
114 114 114 114
101 101 101 101
9999 9999 9999 9999
155
155
13.3.1 13.3.2 13.4 13.4.1 13.4.2 13.5 13.5.1 13.5.2 13.6 13.6.1 13.6.2 13.7 13.7.1 13.7.2 13.8 13.8.1 13.8.2 13.9 13.9.1 13.9.2 13.10 13.11 13.12 13.13 13.14 13.15 13.16 13.16.1 13.17 13.18 13.19 13.19.1 13.20 13.21 13.22 13.23 13.23.1 13.23.2 13.24 13.24.1 13.24.2 13.25
367 367
2209 2209
983 983
2261 2261
114 114
101 101
9999 9999
155
367 367 367 367 367 367 367 367 367 367 367 367 367 367 367 367 367 367 367 367 367 155
2209 2209 2209 2209 2209 2209 2209 2209 2209 2209 2209 2209 2209 2209 2209 2209 2209 2209 2209 2209 2209 115 155
982 982 982 982 982 982 983 983 983 983 982 982 982 983 983 1159 1159 1159 983 983 115 101
2203 2203 2203 2203 2203 2203 2261 2261 2261 2261 2203 2203 2203 2261 2261 2203 2203 2203 2261 2261 9999 9999
114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114
101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101
9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999
155
115
367
2209
983
2261
114
9999 155
155 114
115 9999
101
13.25.1 13.25.2 13.26 13.27 13.28 13.28.1 13.28.2 13.28.3 13.28.4 13.29 13.29.1 13.29.2 13.29.3 13.29.4 13.3 13.31 13.31.1 13.31.2 13.32 13.32.1 13.33 13.33.1 13.33.2 13.34 13.35 13.35.1 13.36 13.37 13.37.1 13.38 13.39 13.39.1 13.39.2 13.4 13.41 13.41.1 13.42
869
9999
122
114
9999
155 155
115 115
101 101
9999 9999
367 367
2209 2209
983 983
2261 2261
775
9999
141
115
9999
9999
820
9999
9999
816
9999
9999
131
115
13.42.1 13.43 13.43.1 13.44 13.44.1 13.45 13.45.1 13.46 13.46.1 13.47 13.47.1 13.48 13.48.1 13.48.2 13.48.3 13.49 13.50 13.50.1 13.50.2 13.50.3 13.50.4 13.51 13.52 13.52.1 13.52.2 13.53 13.53.1 13.54 13.54.1 13.54.2 13.55 13.55.1 13.55.2 13.56 13.56.1 13.56.2 13.57 13.57.1 13.58 13.59 13.6 13.60.1
816 820
9999 9999
9999 131
131 115
114 9999
9999
8506
851
9999
131
115
101
823 4201 4202 4202 850
9999 9999 9999 9999 818
9999 9999 9999 9999 9999
131 131 131 131 9999
115 115 115 115 131
9999 9999 9999 9999 115
9999 9999 9999 9999 9999
9999
4202
9999
131
114
9999
834
859
9999
131
115
9999
9999
835
9999
9999
131
115
9999
9999
13.61 13.61.1 13.62 13.62.1 13.63 13.63.1 13.64 13.64.1 13.65 13.65.1 13.66 13.66.1 13.67 13.67.1 13.67.2 13.68 13.68.1 13.69 13.69.1 13.70 13.71 13.72 13.73 13.73.1 13.73.2 13.74 13.75 13.76 13.77 13.78 13.79 14 14.1 14.1.1 14.1.2 14.2 14.2.1 14.2.2 14.2.3 14.3 14.4 14.4.1 14.5
833 823
9999 9999 131
9999 115 833
131
115
9999
9999
828
9999
131
115
9999
9999
1000
9999
999
9999
9999
9999
9999
131
8733
14.5.1 14.5.2 14.6 14.6.1 14.6.2 14.7 14.7.1 14.7.2 14.8 14.8.1 14.8.2 14.9 14.1 14.11 14.12 14.13 14.14 14.14.1 14.15 14.15.1 14.16 14.16.1 14.16.1.1 14.16.1.2 14.16.2 14.16.2.1 14.16.2.2 14.17 14.18 14.18.1 14.18.2 14.19 14.2 14.21 14.22 14.22.1 14.22.2 14.23 14.24 14.25
14.26 14.26.1 14.26.1.1 14.26.1.2 14.26.2 14.26.2.1 14.26.2.2 14.27 14.27.1 14.28 14.28.1 14.28.2 14.29 14.30 14.30.1 14.30.2 14.31 14.31.1 14.31.2 14.31.3 14.32 14.32.1 14.32.2 14.32.3 14.33 14.33.1 14.33.2 14.33.3 14.34 14.35 14.35.1 14.35.2 14.35.3 14.35.4 14.35.5 14.36 14.37 14.38 14.39 14.4 14.40.1 14.40.2 14.40.3
444
446
9999
9999
1189
2204
367
2209
983
14.40.4 14.40.5 14.41 14.42 14.42.1 14.42.2 14.43 14.44 14.45 14.45.1 14.46 14.47 14.47.1 14.48 14.48.1 14.49 14.49.1 14.5 14.50.1 14.51 14.51.1 14.51.2 14.51.3 14.52 14.52.1 14.53 14.53.1 14.54 14.54.1 14.55 14.55.1 14.56 14.56.1 14.57 14.57.1 14.58 14.58.1 14.59 14.59.1 14.6 14.61 14.62
2467
9999
112
14.62.1 14.62.2 14.63 14.63.1 14.64 14.64.1 14.65 14.65.1 14.65.2 14.66 14.66.1 14.66.2 14.67 14.67.1 14.67.2 14.68 14.68.1 14.68.2 14.69 14.69.1 14.69.2 14.7 14.71 14.72 14.73 14.74 15 15.1 15.2 15.2.1 15.2.2 15.3 15.4 15.5 15.6 15.7 15.7.1 15.7.2 15.7.3 15.7.4 15.8 15.8.1
423 428
9999 9999
9999 9999
15.8.2 15.8.3 15.9 15.9.2 15.1 15.10.1 15.10.2 15.11 15.11.1 15.11.2 15.12 15.12.1 15.12.2 15.13 15.13.1 15.13.2 15.14 15.14.1 15.14.2 15.15 15.15.1 15.15.2 15.16 15.16.1 15.16.2 15.17 15.17.1 15.17.2 15.18 15.19 15.2 15.21 15.22 15.23 15.23.1 15.23.2 15.24 15.25 15.26 15.27 15.28 15.28.1 15.28.2
15.29 15.3 15.31 15.32 15.33 15.34 15.34.1 15.34.2 15.35 15.36 15.37 15.38 15.39 15.39.1 15.39.2 15.39.3 15.4 15.40.1 15.40.2 15.41 15.42 15.42.1 15.42.2 15.42.3 15.43 15.43.1 15.43.2 15.44 15.44.1 15.44.2 15.45 15.45.1 15.45.2 15.45.3 15.46 15.46.1 15.46.2 15.47 15.47.1 15.47.2 15.48 15.49 15.5
15.51 15.52 15.53 15.53.1 15.53.2 15.54 15.55 15.55.1 15.55.2 15.55.3 15.56 15.57 15.58 15.59 16.1 16.2 16.3 16.3.1 16.3.2 16.3.3 16.3.4 16.3.5 16.3.6 16.3.7 16.3.8 16.3.9 16.3.10 16.4 16.5 16.5.1 16.5.2 16.6 16.6.1 16.7 16.7.1 16.8 16.8.1 16.9 16.1 16.11 16.12
128 115 114 3 113 1235 9999 9999
2902
291
292
2206
2911
2903
2904
2202
2267
114
115
101
113
2602
2201
123
124
115
9999
16.12.1 16.13 16.13.1 16.13.2 16.14 16.15 16.15.1 16.15.2 16.16 16.17 16.17.1 16.18 16.18.1 16.19 16.2 16.21 16.22 16.23 16.24 16.24.1 16.24.2 16.24.3 16.25 16.26 16.27 16.28 16.28.1 16.29 16.29.1 16.3 16.30.1 16.30.2 16.31 16.31.1 16.31.2 16.32 16.32.1 16.32.2 16.32.3
1007
2205
103
114
9999
16.33 16.33.1 16.33.2 16.33.3 16.34 16.35 16.36 16.36.1 16.36.2 16.37 16.37.1 16.37.2 16.38 16.38.1 16.38.2 16.38.3 16.39 16.39.1 16.39.2 16.39.3 16.40 16.41 16.42 16.43 16.44 16.45 16.46 16.46.1 16.47 16.47.1 16.47.2 16.48 16.48.1 16.48.2 16.49 16.5 16.51 16.51.1
2916 293 367
2211 295 2209
298 297 293
2202 2206 295
370 2202 297 982 982
2200 2203 2206 367 2202 2209 2203
16.52 16.53 16.54 16.54.1 16.55 16.55.1 16.56 16.56.1 16.57 16.57.1 16.58 16.58.1 16.59 16.59.1 16.59.2 16.6 16.60.1 16.61 16.62 16.63 16.64 16.65 16.66 16.66.1 16.67 16.68 16.69 16.7 16.70.1 16.70.2 16.71 16.72 16.73 16.74 16.74.1 16.74.2 16.74.3 16.75A 16.76 16.77 16.78A 16.48A.1
295
297
2202
982
2203
367
2209
7318
17 17.1 17.1.1 17.1.2 17.2 17.2.1 17.2.2 17.3 17.3.1 17.3.2 17.4 17.4.1 17.4.2 17.4.3 17.4.4 17.5 17.5.1 17.5.2 17.5.3 17.5.4 17.6 17.6.1 17.6.2 17.6.3 17.6.4 17.7 17.7.1 17.7.2 17.7.3 17.7.4 17.7.5 17.7.6 17.7.7 17.7.8 17.7.9 17.7.10 17.7.11 17.8 17.9 17.9.1 17.1 17.10.1 17.10.1.1
1954
7358
1896
9999
9999
116
123
1875
1955
7358
9999
9999
116
1875
1955
7006
9999
1350
7379
7361
1534
1893
1947
1885
1951
1309
9999
9999
9999
17.10.1.2 17.10.1.3 17.10.1.4 17.10.2 17.10.2.1 17.10.2.2 17.10.2.3 17.11 17.11.1 17.11.2 17.12 17.12.1 17.13 17.13.1 17.13.2 17.14 17.14.1 17.15 17.16 17.17 17.17.1 17.17.2 17.18 17.18.1 17.18.2 17.19 17.19.1 17.19.2 17.2 17.20.1 17.20.2 17.21 17.22 17.23 17.24 17.25 17.25.1 17.25.2 17.25.3 17.25.4 17.25.5 17.25.6 17.26
7102
1309
9999
9999
9999
116
123
1955
9999
9999
123
114
17.26.1 17.27 17.27.1 17.27.2 17.28 17.28.1 17.28.1.1 17.28.1.2 17.28.2 17.28.2.1 17.28.2.2 17.29 17.3 17.31 17.32 17.32.1 17.32.2 17.32.3 17.32.4 17.33 17.34 17.34.1 17.34.2 17.35 17.35.1 17.35.1.1 17.35.1.2 17.35.2 17.35.2.1 17.35.2.2 17.36 17.36.1 17.36.2 17.37 17.37.1 17.37.2 17.38 17.38.1 17.38.1.1 17.38.1.2 17.38.2 17.38.2.1 17.38.2.2
1392
7116
588
9999
9999
1617 3620 1616 3621
9999 9999 9999 9999
9999 9999 9999 9999
116 116 116 116
100 100 100 100
114 114 114 114
1331
9999
116
124
114
9999
295
3624
1374
9999
17.39 17.39.1 17.39.1.1 17.39.1.2 17.39.2 17.39.2.1 17.39.2.2 17.4 17.40.1 17.40.1.1 17.40.1.2 17.40.2 17.40.2.1 17.40.2.2 17.41 17.41.1 17.41.1.1 17.41.1.2 17.41.2 17.41.2.1 17.41.2.2 17.42 17.42.1 17.42.1.1 17.42.1.2 17.42.2 17.42.2.1 17.42.2.2 17.43 17.43.1 17.43.1.1 17.43.1.2 17.43.2 17.43.2.1 17.43.2.2 17.44 17.44.1 17.44.1.1 17.44.1.2 17.44.2 17.44.2.1 17.44.2.2 17.45
3629
9999
1637 3654
1374
9999 1374
9999
3644
1374
9999
3645
1373
9999
3640
9999
17.45.1 17.45.1.1 17.45.1.2 17.46 17.46.1 17.46.1.1 17.46.1.2 17.47 17.47.1 17.47.1.1 17.47.1.2 17.48 17.48.1 17.48.1.1 17.48.1.2 17.49 17.49.1 17.49.1.1 17.49.1.2 17.49.2 17.49.2.1 17.49.2.2 17.5 17.50.1 17.50.1.1 17.50.1.2 17.50.2 17.50.2.1 17.50.2.2 17.51 17.51.1 17.51.1.1 17.51.1.2 17.52 17.52.1 17.52.1.1 17.52.1.2 17.53 17.53.1 17.53.1.1 17.53.1.2 17.53.2 17.53.2.1
3674
1374
9999
3660
9999
3681
9999
17.53.2.2 17.53.3 17.53.3.1 17.53.3.2 17.54 17.54.1 17.54.1.1 17.54.2 17.54.2.1 17.54.2.2 17.55 17.55.1 17.55.1.1 17.55.1.2 17.55.2 17.55.2.1 17.55.2.2 17.56 17.56.1 17.56.1.1 17.56.1.2 17.56.2 17.56.2.1 17.56.2.2 17.57 17.57.1 17.57.1.1 17.57.1.2 17.57.2 17.57.2.1 17.57.2.2 17.58 17.58.1 17.58.2 17.58.3 17.59 17.59.1 17.59.2 17.59.3 17.60 17.60.1 17.60.1.1 17.60.1.2
1397 1397
1881 1881
9999 9999
9999 9999
116 116
117 117
114 114
7808
9999
9999
123
114
17.60.2 17.60.2.1 17.60.2.2 17.61 17.61.1 17.61.2 17.61.3 17.62 17.63 17.64 17.65 17.65.1 17.65.2 17.66 17.66.1 17.66.2 17.67 17.68 17.68.1 17.69 17.69.1 17.69.2 17.7 17.70.1 17.70.2 17.71 17.72 17.73 17.73.1 17.73.2 17.74 17.75 17.76 17.76.1 17.77 17.77.1 17.77.2 17.77.3 18 18.1 18.1.1 18.1.2 18.1.3
7809 1898
9999 1898
9999 9999
123 9999
114 123
114
833
9999
131
115
9999
9999
9999
8300 8301 8302
9999 9999 9999
116 116 116
117 117 117
114 114 114
18.1.4 18.1.5 18.1.6 18.2 18.2.1 18.2.2 18.2.3 18.2.4 18.3 18.3.1 18.3.2 18.3.3 18.3.4 18.3.5 18.3.6 18.4 18.4.1 18.4.2 18.4.3 18.4.4 18.4.5 18.4.6 18.5 18.5.1 18.5.2 18.5.3 18.5.4 18.6 18.6.1 18.6.2 18.6.3 18.6.4 18.6.5 18.6.6 18.6.7 18.6.8 18.6.9 18.6.10 18.6.11 18.7
8303 8304 8305 116 116 116 116 117 117 117 117 8300 8301 8302 8303
9999 9999 9999 114 114 114 114 123 123 123 123
116 116 116 124 124 124 124
117 117 117 114 114 114 114
114 114 114 295 295 295 295 297 297 297 297
8300 8301 8302 8303 8304 8305
116 116 116 116 116 116
114 114 114 114 114 114
114 114 114 114 114 114
115 115 115 115 115 115
8625 8626 8627 8628 8629 8630 8625 8626 8627 8628 8625 8626 8627 8628 8629 8630 8631 8632 8633 8634 8635 123 123 123 123
9999 9999 9999 9999 9999 9999 124 124 124 124 114 114 114 114 116 116 116 116 116 116 116 116 116 116 116
116 116 116 116 116 116 295 295 295 295 114 114 114 114 114 114 114 114 114 114 114
117 117 117 117 117 117 297 297 297 297
114 114 114 114 114 114 2202 2202 2202 2202 114 114 114 114 114 114 114 114 114 114 114 982 982 982 982 115 115 115 115 115 115 115 115 115 115 115
18.7.1 18.7.2 18.7.3 18.7.4 18.7.5 18.7.6 18.8 18.8.1 18.8.2 18.8.3 18.8.4 18.9 18.9.1 18.9.2 18.9.3 18.9.4 18.9.5 18.9.6 18.9.7 18.9.8 18.9.9 18.9.10 18.10 18.10.1 18.10.2 18.10.3 18.10.4 18.10.5 18.10.6 18.11 18.11.1 18.11.2 18.12 18.12.1 18.12.2 18.12.3 18.12.4 18.12.5 18.12.6 18.12.7
8636 8637 8638 8639 8640 8641
9999 9999 9999 9999 9999 9999
116 116 116 116 116 116
117 117 117 117 117 117
114 114 114 114 114 114
8636 8637 8638 8639
123 123 123 123
124 124 124 124
114 114 114 114
295 295 295 295
297 297 297 297
2202 2202 2202 2202
982 982 982 982
8636 8637 8638 8639 8640 8641 8642 8643 8644 8645
116 116 116 116 116 116 116 116 116 116
114 114 114 114 114 114 114 114 114 114
114 114 114 114 114 114 114 114 114 114
115 115 115 115 115 115 115 115 115 115
1545 1546 1547 1548 1549 1550 1545 1545 1545 1546 1547 1548 1549 1550 1551
2271 2271 2271 2271 2271 2271 2271 2271 2271 2271 2271 2271 2271 2271 2271
9999 9999 9999 9999 9999 9999 9999 9999 828 828 9999 9999 9999 9999 9999 9999 9999 9999 9999
9999 9999 9999 9999 9999
116 116 116 116 116 116 115 131 116 116 116 116 116 116 116 9999 115 114 114 114 114 114 114 114
117 117 117 117 117 117 9999 9999
131
18.12.8 18.13 18.13.1 18.13.2 18.14 18.15 18.15.1 18.15.2 18.16 18.16.1 18.16.2 18.17 18.17.1 18.17.2 18.17.3 18.17.4 18.17.5 18.17.6 18.18 18.18.1 18.18.2 18.18.3 18.19 18.19.1 18.19.1.1 18.19.1.2 18.19.2 18.19.2.1 18.19.2.2 18.19.3 18.19.3.1 18.19.3.2 18.19.4 18.19.4.1 18.19.4.2 18.19.5 18.19.5.1 18.19.5.2 18.19.6 18.19.6.1 18.19.6.2 18.2
1552 1608 1612 1555
2271 1555 1559 9999 9999 9999 116
9999 116 116 114 114 114
116
114
1339 1340 1342 1343 1927 1928 1929 1930 1931 1932 1922 1923 1924
9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999
1933 3080
9999 9999
18.20.1 18.20.2 18.20.3 18.21 18.21.1 18.21.1.1 18.21.1.2 18.21.2 18.21.2.1 18.21.2.2 18.22 18.22.1 18.22.2 18.23 18.24 18.25 18.25.1 18.25.2 18.26 18.26.1 18.26.2 18.27 18.27.1 18.27.2 18.27.3 18.27.4 18.27.5 18.27.6 18.27.7 18.27.8 18.27.9 18.27.10 18.27.11 18.28 18.28.1 18.28.2 18.28.3 18.28.4 18.28.5 18.28.6 18.28.7 18.28.8
116 116 117 117 114 114 9999 9999
1468
2309
116
117
114
9999
7699 7700
2322 2322
116 116
117 117
114 114
9999 9999
1881 1881 1881
761 761 761
771 771 771
9999 9999 9999
9999 9999 9999
116 116 116
117 117 117
114 114 114
18.28.9 18.28.10 18.28.11 18.29 18.3 18.30.1 18.30.2 18.30.3 18.30.4 18.30.5 18.30.6 18.30.7 18.30.8 18.30.9 18.30.10 18.30.11 18.30.12 18.31 18.31.1 18.31.1.1 18.31.1.2 18.31.2 18.31.2.1 18.31.2.2 18.31.3 18.31.3.1 18.31.3.2 18.31.4 18.31.4.1 18.31.4.2 18.31.5 18.31.5.1 18.31.5.2 18.31.6 18.31.6.1 18.31.6.2 18.32 18.32.1 18.33 18.33.1 18.34 18.34.1
1397 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384
2341 1956 1956 1957 1958 1959 1960 1960 1961 1962 1962 1964 1964 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 116 116 116 116 116 116 116 116 116 116 116 116 117 117 117 117 117 117 117 117 117 117 117 117 114 114 114 114 114 114 114 114 114 114 114 114
3311
2309
116
117
114
9999
1374
1956
1942 3317 1943 3320 2309
2309 2309 116 2309
116 116 117 116
117 117 114 117
114 114 9999 114
9999 9999 1377 9999
1379 1379 1959 1377
1960 1960
1959
3321
2309
116
117
114
9999
1378
1960
9999
3326 1304 1305 20 155 155
2309 115 115 18
116 101 101 128
117 9999 9999 115
114 367 367 101
9999
1379 2209 2209 295 295 295
1960 297 297 2206
9999
293
2202
18.35 18.35.1 18.36 18.36.1 18.37 18.37.1 18.38 18.38.1 18.38.2 18.38.3 18.38.4 18.38.5 18.38.6 18.39 18.39.1 18.39.2 18.39.3 18.39.4 18.39.5 18.39.6 18.40 18.40.1 18.40.2 18.40.3 18.40.4 18.40.5 18.40.6 18.40.7 18.40.8 18.41 18.41.1 18.41.2 18.41.3 18.41.4 18.41.5 18.41.6 18.41.7 18.41.8 18.41.9 18.41.10 18.42 18.42.1 18.42.2
1305 1305 1307 4202 4202 4202 4202 4202 4202 833 833 833 833 833 833 828 828 828 828 828 828 828 828 6501 6501 6501 6501 6501 6501 6501 6501 6501 6501 116 116
155 155 155 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 2335 2335 2335 2335 2335 2335 2335 2335 2335 2335 114 114
115 115 115
101 101 101 131 131 131 131 131 131 131 131 131 131 131 131 131 131 131 131 131 131 131 131 114 114 114 114 114 114 114 114 114 114
9999 9999 9999 155
367 367 367
2209 2209 2209 101 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999
295 295 295
297 297 297 367 9999 9999 9999 9999 9999
115 115 115 115 115 115 115 115 115 115 115 115 115 115 115 115 115 115 115 115 115 115 115 115 115 115 115 115 115 1472 1472 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999
833 833 833 833 833 9999 9999 9999 9999 9999 9999
10 10
9999 9999
18.42.3 18.43 18.44 18.45 18.46 18.46.1 18.46.2 18.46.3 18.46.4 18.46.5 18.46.6 18.46.7 18.46.8 18.47 18.47.1 18.47.2 18.47.3 18.47.4 18.47.5 18.47.6 18.47.7 18.47.8 18.48 18.49 18.49.1 18.50 18.50.1 18.51 18.51.1 18.52 18.52.1 18.53 18.53.1 18.54 18.54.1 18.54.2 18.54.3 18.54.4 18.55 18.55.1 18.55.2
116 1882 1549 1693 1641 1642 1643 1644 1645 1646 1647 1648 1641 1642 1643 1644 1645 1646 1647 1648 1649
114 9999 2271 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999
10 116 9999 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 9999
1472 114 116 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 9999 114 9999
9999 9999
7257 7258 7259 7260 7261
9999 9999 9999 9999 9999
7400 7401 7402 7859 7403 7405
9999 9999 9999 9999 9999 9999
18.55.3 18.56 18.56.1 18.56.2 18.57 18.57.1 18.57.2 18.58 18.58.1 18.58.1.1 18.58.1.2 18.58.2 18.58.2.1 18.59 18.59.1 18.59.2 18.59.3 18.60 18.60.1 18.60.2 18.60.3 18.60.4 18.61 18.61.1 18.61.2 18.61.3 18.61.4 18.62 18.62.1 18.62.2 18.62.3 18.62.4 18.62.5 18.63 18.64 18.65 18.66 18.66.1 18.66.2 18.67 18.67.1 18.67.2
7861 7406 7401 7407 7408
9999 9999 9999 9999 9999
7409 7411 7412
9999 9999 9999
7415 7416 7417 7418 7419 7420 7421 7422 7423 7424 7425 7495 7496 7497 7498 7499 7500 7501 7509 7708 7709 7710 7711
9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999
9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999
1373 1373 1374 1374 1375 1376 1377 1374 1375 1376 1377
1956 1956 1956 1956 1956 1958 1959 1956 1956 1958 1959
9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999
116 116 116 116 116 116 116 116 116 116 116
9999 9999 9999 2309 2309 2309 2309 116 116 116 116 117 117 117 117 114 114 114 114 9999 9999 9999 9999
18.68 18.68.1 18.68.2 18.69 18.69.1 18.69.2 18.70 18.70.1 18.70.2 18.70.3 18.70.4 18.70.5 18.70.6 18.70.7 18.70.8 18.70.9 18.70.10 18.70.11 18.70.12 18.70.13 18.70.14 18.70.15 18.71 18.71.1 18.71.2 18.71.3 18.71.4 18.71.5 18.71.6 18.71.7 18.71.8 18.71.9 18.71.10 18.72 18.72.1 18.72.2 18.72.3 18.72.4 18.72.5 18.72.6 18.72.7 18.72.8 18.72.9
7682 7682 7684 7685 7666 7668 7669 7670 7671 7672 7673 7674 7675 7676 7677 7678 7679 7680 7681 116 116 116 116 116 116 116 116 116 116
2309 2309 2309 2309 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 117 117 117 117 117 117 117 117 117 117 114 114 114 114 114 114 114 114 114 114 117 116 116 116 116 116 116 116 116
116 116 116 116 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 114 117 117 117 117 117 117 117 117
117 117 117 117 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 7712 7713 7714 7715 7716 7717 7718 7719 7720 7721
114 114 114 114
9999 9999 9999 9999
2319 2321 2322 2323 2324 2326 2326 2327 2328 2329
7722 2343 116 2344 7723 2345 7724 2346 7725 2347 7726 2348 7727 2349 7728 2350 7729 2351 7730
9999 114 9999 114 9999 114 9999 114 9999 114 9999 114 9999 114 9999 114 9999
18.72.10 18.72.11 18.72.12 18.72.13 18.72.14 18.72.15 18.72.16 18.72.17 18.72.18 18.72.19 18.72.20 18.72.21 18.72.22 18.72.23 18.72.24 18.72.25 18.72.26 18.72.27 18.72.28 18.72.29 18.73 18.73.1 18.73.2 18.73.3 18.73.4 18.73.5 18.73.6 18.73.7 18.73.8 18.73.9 18.73.10 18.73.11 18.74 18.74.1 18.74.2 18.75 18.75.1 18.75.2 18.75.3 18.76 18.76.1 18.77 18.78
7731 7732 7733 7734 7735 7651 7652 7653 7654 7655 7656 7657 7658 7659 7660 7661 7662 7663 7664 7665 7686 7687 7688 7689 7690 7691 7692 7693 7694 7695 7696 7862 7863 7864 7865 7866 123 295 123
2352 2353 2355 2356 2357 2319 2321 2322 2323 2324 2325 2326 2327 2328 2329 2330 2331 2332 2333 2334 2319 2321 2322 2323 2324 2325 2326 2327 2328 2329 2330
116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 9999 9999 9999 9999 9999
117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117
114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114
9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999
124 297 124
114 2202 114
982 295
2602 2203 297
367 367 2202
2209 2209 982
982 155 2203
2203 114 367
18.79 18.80 18.80.1 18.80.2 18.80.3 18.80.4 18.80.5 18.80.6 18.80.7 18.80.8 18.80.9 18.80.10 18.80.11 18.80.12 18.81 18.81.1 18.81.2 18.81.3 18.81.4 18.81.5 18.81.6 18.81.7 18.81.8 18.81.9 18.81.10 18.81.11 18.81.12 18.82 18.82.1 18.82.2 18.82.3 18.82.4 18.82.5 18.82.6 18.82.7 18.82.8 18.82.9 18.82.10 18.82.11 18.82.12 18.83 18.83.1 18.83.2
123 1301 1301 1301 1301 1301 1301 1301 1301 1301 1301 1301 1301 1301 1301 1301 1301 1301 1301 1301 1301 1301 1301 1301 1301 20 20 20 20 20 20 20 20 20 20 20 20 116 116
124
114 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116 116
295 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 115 115 115 115 115 115 115 115 115 115 115 115
297 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999
2202
982
2203
367
18 18 18 18 18 18 18 18 18 18 18 18 114 114
128 128 128 128 128 128 128 128 128 128 128 128 9999 9999
128 128 128 128 128 128 128 128 128 128 128 128
115 115 115 115 115 115 115 115 115 115 115 115
101 101 101 101 101 101 101 101 101 101 101 101
18.83.3 18.83.4 18.83.5 18.83.6 18.83.7 18.83.8 18.83.9 18.83.10 18.83.11 18.83.12 19 19.1 19.1.1 19.1.2 19.1.3 19.1.4 19.1.5 19.1.6 19.2 19.2.1 19.2.2 19.2.3 19.2.4 19.2.5 19.3 19.3.1 19.3.2 19.3.3 19.3.4 19.3.5 19.3.6 19.4 19.4.1 19.4.1.1 19.4.1.2 19.4.2 19.4.2.1 19.4.2.2 19.4.3 19.4.3.1 19.4.3.2 19.5 19.5.1
116 116 116 116 116 116 116 116 116 116
114 114 114 114 114 114 114 114 114 114
9999 9999 9999 9999 9999 9999 9999 9999 9999 9999
1854 1855 1856 1857 1858 1859 293 293 293 293 293 293 293 293 293 293 293
2224 2225 2225 2227 2228 2229 295 295 295 295 295 295 295 295 295 295 295
367 367 367 367 367 367 2206 2206 2206 2206 2206 2206 2206 2206 2206 2206 2206
2209 2209 2209 2209 2209 2209 2202 2202 2202 2202 2202 2202 2202 2202 2202 2202 2202
983 983 983 983 983 983 982 982 982 982 982 982 982 982 982 982 982
2261 2261 2261 2261 2261 2261 2203 2203 2203 2203 2203 2203 2203 2203 2203 2203 2203
1881 1881 1881 1881 1881 1881 367 367 367 367 367 367 367 367 367 367 367
123 123 123 123 123 123 2209 2209 2209 2209 2209 2209 2209 2209 2209 2209 2209
124 124 124 124 124 124 155 155 155 155 155 155 155 155 155 155 155
1900 1902 1902 1902 1902 1904 114
1364 1366 1365 1366 1367 1367 115
1352 1352 1352 1352 1352 1352
9999 9999 9999 9999 9999 9999
367 367 367 367 367 367
2209 2209 2209 2209 2209 2209
155 155 155 155 155 155
114 114 114 114 114 114
101 101 101 101 101 101
19.5.2 19.5.3 19.5.4 19.5.5 19.5.6 19.5.7 19.5.8 19.5.9 19.6 19.6.1 19.6.2 19.6.3 19.6.4 19.6.5 19.6.6 19.6.7 19.6.8 19.6.9 19.6.10 19.6.11 19.6.12 19.6.13 19.7 19.7.1 19.7.1.1 19.7.1.2 19.7.2 19.7.2.1 19.7.2.2 19.7.3 19.7.3.1 19.7.3.2 19.8 19.8.1 19.8.1.1 19.8.1.2 19.8.2 19.8.2.1 19.8.2.2 19.9 19.9.1 19.9.1.1 19.9.1.2
114 114 114 114 114 114 114 114 1700 1701 1702 1703 1704 1705 1706 1707 1709 1710 1711 1712 1713
115 115 115 115 115 115 115 115 1714 1715 1716 1717 1718 1719 1720 1721 1723 1724 1725 1726 1717 2275 2281 2287 2290 2299 2299 2303 2303 2303 2331 2332 2333 2334 367 367 367 367 367 367 367 367 367 367 367 367 367 2209 2209 2209 2209 2209 2209 2209 2209 2209 2209 2209 2209 2209 983 983 983 983 983 983 983 983 983 983 983 983 983 2261 2261 2261 2261 2261 2261 2261 2261 2261 2261 2261 2261 2261 123 123 123 123 123 123 123 123 123 123 123 123 123 124 124 124 124 124 124 124 124 124 124 124 124 124
2 2 2 2 2
12 12 12 12 12
101 101 101 101 101
102 102 102 102 102
103 103 103 103 103
114 114 114 114 114
115 115 115 115 115
116 116 116 116 116
123 123 123 123 123
2602
2201
9999
123
124
115
101
367
2209
2602
2201
9999
123
124
115
101
367
2209
19.1 19.10.1 19.10.2 19.11 19.11.1 19.11.1.1 19.11.1.2 19.12 19.12.1 19.12.2 19.13 19.13.1 19.13.1.1 19.13.1.2 19.14 19.14.1 19.14.2 19.15 19.15.1 19.15.2 19.16 19.17 19.17.1 19.17.2 19.18 19.18.1 19.18.2 19.18.3 19.19 19.19.1 19.19.1.1 19.19.1.2 19.19.1.3 19.19.2 19.19.2.1 19.19.2.2 19.19.3 19.19.3.1 19.19.4 19.19.4.1 19.20 19.21 19.21.1
1003
9999
103
114
123
124
295
297
2202
1355 3861
9999 9999
114 114
19.21.2 19.21.3 19.22 19.22.1 19.22.2 19.23 19.23.1 19.23.2 19.24 19.24.1 19.24.2 19.24.3 19.24.4 19.25 19.25.1 19.25.2 19.25.3 19.25.4 19.26 19.26.1 19.26.2 19.26.3 19.26.4 19.27 19.27.1 19.28 19.28.1 19.29 19.29.1 19.30 19.30.1 19.30.1.1 19.30.2 19.30.2.1 19.30.3 19.30.3.1 19.30.1 19.31.1 19.31.1.1 19.31.2 19.31.2.1 19.31.3 19.31.3.1
1354 1354
293 293
295 295
2206 2206
2202 2202
983 983
2261 2261
367 367
2209 2209
19.32 19.32.1 19.33 19.34 19.34.1 19.34.2 20 20.1 20.1.1 20.1.2 20.1.3 20.1.4 20.1.5 20.1.6 20.1.7 20.1.8 20.2 20.2.1 20.2.2 20.2.3 20.2.4 20.2.5 20.2.6 20.2.7 20.2.8 20.2.9 20.3 20.3.1 20.3.2 20.3.3 20.3.4 20.4 20.4.1 20.4.2 20.4.3 20.4.4 20.5 20.5.1 20.5.2 20.5.3 20.5.4 20.5.5 20.5.6
20 20 7128 7129
18 18 9999 9999
128 128 367 367
115 115 2209 2209
128 362 983 983
114 2260 2261 2261
2602 2602 1881 1881
362 2201 123 123
285 123 124 124
20.6 20.6.1 20.6.1.1 20.6.1.2 20.6.2 20.6.2.1 20.6.2.2 20.6.3 20.6.3.1 20.6.3.2 20.7 20.7.1 20.7.1.1 20.7.1.2 20.7.2 20.7.2.1 20.8 20.8.1 20.8.2 21 21.1 21.1.1 21.1.1.1 21.1.1.2 21.1.1.3 21.1.2 21.1.2.1 21.1.2.2 21.1.2.3 21.2 21.2.1 21.2.2 21.3 21.3.1 21.3.2 21.3.3 21.4 21.4.1 21.4.2 21.5 21.6 21.7 21.7.1
7306 7306 7306 7306 7306 7306
589 589 589 689 689 689
7019 7019 7019
7389 7392 7393
9999 9999 9999 589 589 589
116 116 116 7389 7392 7393 7477 7480
7480 2406 2407 2406 7394 7396 7306 7395 2704
9999 9999 9999 9999
9999 7390 7390 7390 9999 9999 9999 9999 7048
112 112 112 112 123 7392
114 114 114 114 124 9999 9999 9999 112 9999 992 7313 9999 114 9999 7388
2406
295 123
589
7389
7347
7348
112
21.7.2 21.8 21.8.1 21.9 21.9.1 21.9.2 21.10 21.11 21.11.1 21.11.2 21.11.3 21.11.4 21.11.5 21.12 21.12.1 21.12.2 21.12.3 21.13 21.14 21.15 21.15.1 21.15.2 21.15.3 21.16 21.16.1 21.16.2 21.16.3 22 22.1 22.1.1 22.2 22.2.1 22.3 22.4 22.4.1 22.4.2 22.4.3 22.5 22.6 22.7 22.7.1 22.8 22.8.1
2704 8646 7391 7391 8648 8649 8650 8651 8652 8653 7306 7306 7306 7001 7306 8660 8661 8662 8663 8664 8665
7392 8654 7389 7389 9999
7347 9999
7348
7313
9999
9999 8647 8647 8647 8647 8647 7389 7392 7393 589 8666 8666 8666 8666 8666 8666 9999 9999 9999 111 9999 9999 9999 9999 9999 8647 8647 8647 9999 7019
7390 112 112 112 112 112 111 111 111 7389 111 111 111 111 111 111 9999 9999 9999 9999 9999 9999 9999
112 114 114 114 114 114
114
9999
116
367 1169 367 7427 7429 7429 367 367 367 313
2209 2216 2209 114 114 114 2209 2209 2209
982 367 367 9999 9999 9999
2203 2209 2209
114
101 1213 2203
9999 125 114
1169 114 101
2216 115 9999
982
8501 8501 982 322 2203 1177 114 2202
155 8502 101 2211
114
101 155 285
9999 114 2260 2200
9999 370
22.9 22.10 22.11 22.12 22.13 22.13.1 22.13.2 22.14 22.14.1 22.14.2 22.14.3 22.15 22.16 22.17 22.18 22.18.1 22.19 22.19.1 22.2 22.20.1 22.21 23 23.1 23.2 23.3 23.4 23.4.1 23.4.2 23.4.3 23.5 23.6 23.7 23.8 23.9 23.1 23.10.1 23.10.2 23.10.3 23.11 23.12 23.13 23.14 23.14.1
313 313 313 316 1177 1177 295 367 367 8200 8201 8201 8203 8204 8205 8207
322 318 318 9999 2202 2202 297 2209 2209 316 316 316 8206 8206 8206 9999
2211 2211 2211 131 9999 9999 2202 982 982 313 313 313 2211 2211 2211 159
1177 1177 1177 114 9999 9999 982 2203 2203 2211 2211 2211 9999 9999 9999 130
2202 2202 2202 9999
370 370 370
2200 2200 2200
9999 9999 9999
131 131 131
2203 114 114 9999 9999 9999 1241 1241 1241 114
367 101 101 370 370 370 9999 9999 9999 9999
2209 9999 9999 2200 2200 2200 159 159 159
114 155 155 9999 9999 9999 130 130 130
101 114 114 131 131 131 114 114 114
23.14.2 23.15 23.15.1 23.16 23.17 23.17.1 23.17.2 23.18 23.28.1 23.28.2 23.19 23.19.1 23.19.1.1 23.19.2 23.19.2.1 23.20 23.21 23.22 23.23 23.24 2.27.A 2.27.B 2.27.C 2.27.D 2.27.E 10.26A.1 10.27A 10.28A 10.29A 2.27.A1 9.8A.1.1 10.11.B 11.34.A 16.18A.1 16.53A 2.27.E 5.22A.6 5.33.A 5.35.A 5.35.B 12.52.A
114 114 114 114 114
115 115 115 115 9999
Please Enter Non-Schedule Items CODE here

6501 6501 6501 6501 979 2335 2335 2335 2335 114 114 114 114 114 115 115 115 115 115 101 101 114 101 101 101 9999 115 101
4011A 7861A 7861B 7861C 1620A 1620B 4009B 2390 1350A 8695A 828A 1006 128 116 6501 2335 114 115 101 114
103 115
114 101
115
313
2211
1189
6501 1005 295 367 367 7009
2335 2205 297 2209 2209 7010
114 9999 2202
115 102 982
101 114 2203 367 2209 7318
7011
7012
7013
7014
1022
7015
7020
12.1.C 12.1.D 12.1.E 11.36A 11.38A 17.1A.1 17.3A.1 17.72A 17.71A 17.73A 9.21A.1 9.42A 5.3A 9.45A 9.132.A 9.132.B 16.51A.1 12.36A.1 12.42.3A.1 9.85A 12.54B 12.54C 17.1B 9.47.A.1 6.1.A 16.42A 13.28A.2 2.27.H 19.18A.1 4.2A.5 8.2.A.1 18.83A 18.84A.1.1 18.84A.1.2 18.84.B 18.84C.1 18.84H.1 18.84.D 18.84E.1 18.84E.3 18.84E.5 18.84.I.1 18.86A.2
3050B 7231A 1008A 7800A 7802A 1954 1875A 7504A 7503A 7506A 713A 7055 295 7049A 7449 7478 6501 3004A 7196A 423A 223A 223A 1896A 7034A 2602 295 114 1355 295 123 51
2302A 102 9999 9999
1023A 9999 114
1215B 111 9999 9999 1896 9999 367 367 9999 114 123 123 9999 1350 115 115 116 9999
7006A 7006A 9999 9999
588 9999 2412 297 9999 9999 2335 8220 7034A 2202 112 9999 114 124 9999 9999 112 112 9999 9999 2202 115 115 2202 115 8211 7035A 982 114 2203 9999 367
9999 9999 2209 156 7048
112 114 112 155
112 114 114 9999 111 9999 9999 7048 124 2203 9999 9999 2203 9999
114 115
9999 101
1235
452A
114 114 9999 123 982 101 101 114 982 9999
1896B 7035A 2201 297 155 9999 297 114
9999 115 367 367 1235 367 1168A
9999 101 2209 2209 5001 2209 367
367 983 114
2209 155 2261 5 114 982
2209
52 1235 52 1235 1884B1 1884B2 1884C1 1884C2 1884H1 1884H2 1884D1 1884E1 1884E3 1884E5 116 114 1886A1 1886A2
160 160 1884B3 1884B4 1884C3 1884C4 1884H3 1884H4
18.86A.3 18.83.H 18.85.E 18.84F.1 18.84G 9.27A 9.27A.1 9.27A.2 9.36A.1 9.51A 9.51A.2 9.134.A 13.26A 13.79.A 16.18A 16.18A.1 16.18B 16.18B.1 16.53A 13.79.A 10.16.A 9.51B 24.1.1 24.1.2 24.2 5.11.1.1A 5.11.1.2A 5.11.1.3A 5.11.1.4A 5.11.1.5A 5.11.1.6A 5.11.1.7A 5.11.1.8A 5.11.1.9A 5.11.1.10A 5.11.1.11A 5.11.1.12A 5.11.1.13A 5.11.1.14A 5.11.1.15A 5.11.1.16A 5.11.1.17A 5.11.1.18A
1886A3 1886A4 53 1235 5001 157 114 295 297 982 367 1884F1 1884G5 1190 2505A 1190 7029A 7116A 869A 8733 7029A 2204 2204 9999 9999 2504 111 7349 122 9999 114 9999 112 114
9999 155 114 101 2
595 7048 114 9999
597 9999 9999
637 7029 823
640 595 9999
1029 8691 8733 4009A 7029A
2314 114
9999 102 2205A 7349
114 103 1215A 112
102
103
1030
1028
103
9999
114
9999
5.11.1.19A 5.11.1.20A 5.11.1.21A 5.11.1.22A 5.11.1.23A 5.11.1.24A 5.11.1.25A 5.11.1.26A 5.11.1.27A 5.11.1.28A 16.6.5.A 14.73.A 14.74.A 14.75.A 14.76.A 14.77.A 1473A 1474A 157 1476A 1477A 2505 9999 1474B 139 9999 1477B 2204 131 157 1474B 131 1477C 2504 139 139 157 115 122 9999 9999 2211 123 9999 139 101 139
128
155
115
9999 101
9999 9999 7029 595
9.27B.2
14.80.A 22.20A.1 22.24.A 22.23.A 22.22.A 16.5.A
1480A 122 139 8205 8206 367B 114 157 367A 114 114 115 101
9999 124
1241
9999 114
159 115
81
113
155
9999
9999
101 101 101 9999 9999 9999 128 128 128 9999 9999
115 115 115 115 115 115 128 128
101 101 101 101 101 101 101 101
18
101 101 101 155 101 114 114 114 114 114 114 2209 2209 101
2 2 2 114 2 101 101 101 101 101 101 155 155 123
12 12 12 101 12 2 2 2 2 2 2 114 114 2
9999 9999 9999 2 9999 12 12 12 12 12 12 101 101 12
12 9999 9999 9999 9999 9999 9999 2 2 9999
9999
12 12
9999 9999
101 101 114 101 115 115
123 123 115 123 101 101
124 124 101 124 123 123
2 2 123 2 124 2
12 12 124 12 2 12
9999 9999 2 9999 12 9999
12 9999
9999
101 101 101
2 2 123
12 12 124
9999 9999 2 12 9999 1007 2205 116 103 4202
101 101 9999
2 2
12 12
9999 299 9999
123
124 123
9999 124
9999
982
2203
367
2209
114
123
101
9999
9999
155
114
101 101 101 101 101
2 2 2 123 123
12 12 12 124 124
9999 9999 9999 2 2 12 12 9999 9999
101 101 101 101 101 101 101
123 2 2 2 123 2 123
124 12 12 12 124 12 124
2 9999 9999 9999 2 9999 9999
12 115 123 123 12 115 2
9999 124 124 9999 12 128 115 115 115
7342 7342 7343
7343 1007 7343 7344
2205
116
103
114
9999
4202
9999
131
7343 992
7344
7319
7327
7328
7329
7330
1198
1197
302
2204
8659 8659
7342 7343
7343 7344
131 101 101 101
115 123 123 2
1007 124 124 12
2205 2 2 9999
103 12 12 983
367 9999 9999 2261
2209 7319 7319 115
982 7326 7326 7319
2203 7327 7327 7326
101 7328 7328 7327
7326 7329 7329 7328
2202 101
982 2
2203 12
367 9999
2209 983
155 2261
2 115
12 123
7319 124
7326 128
7327
101 101
2 2
12 12
9999 9999
123 123
124 124 1015 1004 1224 1005 1005 1021 1005
128 128 9999 2205 2205 2205 2205 2205 2205 9999 9999 102 9999 9999 9999 9999 114 102 114
103
101
9999
9999
124
114
9999
155
114
101
12
9999
101 29
123 9
124 155
2 114
12 101
9999 12
7319 9999
7326
7327
7328
7329
123 123 123 123 123 123 123 123
124 124 124 124 124 124 124 124
115 115 115 115 115 115 115 115
123 123 1197 1197 992 123 123 123 123
124 124 6302 6302
115 115 992 992
322 2204 2204 2302 2302 112 112 123 123 124 124 115 115
124 124 124 124
115 115 115 115
123 123 123 123 1197 1197 123 123
124 124 124 124 6302 6302 124 124
115 115 115 115 992 992 115 115 2204 2204 2302 2302 112 112 123 123 124 124 115 115
123
124
115
123 123 123 123 123 123 123
124 124 124 124 124 124 124
115 115 115 115 115 115 115
2115
123 123 123 123 123 1197 123
124 124 124 124 124 6302 124
115 115 115 115 115 992 115
2204 10004
2302 2205
112 102
123
124
115
123 123 155
124 124
115 115
9999
125
115
2215 2215
125 125
115 115
9999 9999
992
2204
2302
1237 1237
2112 2112
367
2209
982
367 1237 1237 1237 1237 1237 1237 1237 1237 1237 1237 1237 1237 1237 1237 1237 1237 1237
2209 367 367 367 367 367 367 367 367 367 367 367 367 367 367 367 367 367
982 2209 2209 2209 2209 2209 2209 2209 2209 2209 2209 2209 2209 2209 2209 2209 2209 2209
2203 982 982 982 982 982 982 982 982 982 982 982 982 982 982 982 982 982
2203 2203 2203 2203 2203 2203 2203 2203 2203 2203 2203 2203 2203 2203 2203 2203 2203
114 114
101 101
2602 2602
2201 2201
123 123
124 124
982 982
9999
26
101
9999
123
124
295
297
2202
2203
2209
115
9999
125
114
115
139
9999
367 367
9999 9999
123 123
114 114
9999 9999
9999 9999
114 9999
114 114 101
9999 9999 2
12
116 116 9999
114 114
9999 9999 123
9999 9999 124
114
1215
102
9999 101
368 9999
2209
784
2268
114
101
9999 126 100 114 115
123 123 114
123 114 114 115
114 115 115 9999
115 9999 9999 9999
9999 9999 9999
9999
123
9999
9999 9999
9999
367 9999
123 367
114 123
9999 114
9999
156 156 640 640 156 156 156
114 114
9999 9999 156 156 114 114 9999 9999
114 114 114
9999 9999 9999
156 156 2204 640 640
119 119 156
114 114 119 156 114
9999 9999 114 119 9999 9999 114
2204 156
9999
637
640
119 9999
114
9999
9999 156 119 114 9999
114
114 114
2204 597 8211 8218
637 8214
111 640 2204 8211 112
112
114 111 111 2204 130 112 114 111
130 112 112
9999 114 114 111
130 130 112
9999 9999 114
8214 114 111 112
130
9999
111 8211 640 597
9999 114 130 112
130 9999 114
9999
637 156 156 112
111 640 114 114 124
130
9999
9999
9999 9999 114
114 114 114 114 9999 9999 9999
101 101 101 101 131 131 131
9999 9999 9999 9999 115 115 115
9999 9999 9999 9999 9999 9999 9999
112 112 112 112 9999 9999 9999
124 124 124 124
114 114 114 114
823 823 823 823
9999 9999 9999 9999
9999 9999 9999 9999
9999 101 101 9999 9999
9999 9999 9999
131 9999 9999 823 823
115 112 111 9999 9999
9999 124 114 9999 9999
9999 114 130 131 131 111 9999 115 115 9999 9999 114 823 9999 9999 130 9999 9999 9999
115 115 9999 9999
9999 9999 9999 9999
9999 9999
2412 2412 9999 9999 7048
7034 7034
7035 7035 112
114
9999 9999 130
9999 9999 9999
7048 7048
2261 2261 2261
114 114 114
101 101 101
9999 9999 9999
9999 9999 9999
112 112 112
124 124 124
114 114 114
9999
9999
102 102 112 112 112 112 297 131
114 114 114 114 114 114 2202 115
9999 9999
982 9999 9999
2203
367
2209
114
115
101
123
124
131
115
9999
9999
569
588
9999
111
114
9999
9999
7271
114
131 103 123 124
115 1221 114
9999 2205
9999 9999 4202 9999 131
9999 116 115
103 9999
139
114
9999 9999 9999
124 119 297
114 295 2202 4202 4202 4202 114
119 297 982 9999 9999 9999 115
9999 2202 2203 9999 9999 9999 101
4202 982 367
9999 2203 2209 131 131 131 124
367 114 115 115 115 2
131 2209 115 9999 9999 9999 12
114 101 9999 9999 9999 9999
115 115 123
9999 101 124
2209
123
595
9999
9999 9999 9999
9999 9999 9999
1215 1215 1215
102 102 102
100 100 100
114 114 114
9999 9999 9999
9999 9999
1215
4202 4202 4202 4202 4202
9999 9999 9999 9999 9999
9999 9999 9999 9999 9999
131 131 131 131 131
115 115 115 115 115
9999 9999 9999 9999 9999
9999 9999 9999 9999 9999
101 2209 7254
127 9999
9999 124 114 115 101 9999
367
2209
114
115
101
123
124
12
9999
2203 367
367 367
367 2209
2209 785
785 2268
2268 367
367 2209
2209 784
784 874
874
9999
124
114
101
139
9999
367
2209
982
2209
9999
2216
123
114
115
139
101
13
124
101
124
115
101
367
2209
982
2203
114
874
124
115
101
874
367
2209
982
2203
123
114
115
139
13
9999
367
2209
982
2203
2209
982
2203
114
101
9999
9999
9999 9999 367
367 2209
982
2203
2209 114
874 101
9999
124 9999
114
115
9999 9999 9999 9999 9999
367 367 367 367
2209 2209 2209 2209
982 982 982 982
2203 2203 2203 2203
114 114 114 114
101 101 101 101
9999 9999 9999 9999
114
9999
9999 130 130
130 112 112
112 114 114
114 4202 4202
4202 9999 9999
9999 131 131
131 115 115
115 9999 9999
9999 845 845
845 9999 9999
130 130 130 130 9999 9999 1208 9999 9999 1209
102 102 102 102
103 103 103 103 102 102
114 114 114 114 114 114 9999 9999 130 130 130 112 102 102 114 112 112 114 114
9999
9999
114 114 112 112 130 112 9999
114 114 112 114 9999
114
111
114
102
131 9999 9999 1984 7904
9999 2207 2207 367 2209 2107 983 2261 1213 114 9999 101 9999 124
2209 982 101 101 123 123
983 2203 124 124
2261 114 128 128
114 101
101 9999 9999 9999
9999
9999 9999
123 3002
124 367
9999 123 124 2209 982 2203
367 367
2209 2209
982 982
2203 2203
114 114
101 101
9999 9999
114 114 114 114 114
9999 9999 9999 9999 9999
114 114
122
122 114
114 101
101 9999
9999 9999
9999 111
122
114
297 297
2202 2202
982 982
2203 2203
367 367
2209 2209
114 114
115 115
101 101
123 123
7188
7190
9999
9999
116
114
100
9999
9999 9999
7016
7017
7018
7021
7019
9999
9999
112
114
130 130
112 112
114 114
130
112
114
1209 112 114 9999 9999
1208 114 9999 102 114 9999 130 102 112 114
115 155 115 155
101 115 101 115
9999 101 9999 101
9999
9999
115 155
101 115
9999 101
9999
155 155 155 155
115 115 115 115 155 115 115 115 115 101 101 115 101 2209 982 115 115 115 115 101
101 101 101 101 115 101 101 101 101 9999 9999 101 9999 2203 101 101 101 101 9999
9999 9999 9999 9999 101 9999 9999 9999 9999 367 367 9999 114 9999 9999 9999 9999 9999 367 2209 155 115
9999 367 367 367 367 2209 2209 367 101 2209 2209 2209 2209 155 155 2209 9999 155 155 155 155 115 115 155 115 115 115 115 9999 9999 115 9999 9999 9999 9999
155 155 155 155 155 155 155 367 155 155 155 155 115 115 115 155 115
9999 155
155
101
9999
9999
155
114
101
9999
1179
114 114
101 101
9999 9999
9999 9999
9999
9999
131
115
9999
9999
9999
2261
114
101
9999
9999
112
124
114
113
1235
9999
9999
1235
9999
9999
130 155 114 114 115
138 101 101
114 2 123 12 124
128 9999 128
114 7319 155
115 7326 2 7327 21
128 7328 22
114 7329 1235
29
155
114
101
12
9999
114
123
114
9999
9999
9999
9999
116
123
114
9999
9999
9999
9999
116
123
114
9999
116
123
114
114
112
114
1189
2204
112
124
114
367
297
2202
982
2203
367
2209
114
115
101
123
2202 2202 2202 2202
982 982 982 982
2203 2203 2203 2203
367 367 367 367
2209 2209 2209 2209
114 114 114 114
115 115 115 115
101 101 101 101
123 123 123 123
124 124 124 124
2 2 2 2
2203 2203 2203 2203
367 367 367 367
2209 2209 2209 2209
114 114 114 114
115 115 115 115
101 101 101 101
123 123 123 123
124 124 124 124
2 2 2 2
12 12 12 12
9999 9999 9999 9999
2203 2203 2203 2203
367 367 367 367
2209 2209 2209 2209
114 114 114 114
115 115 115 115
101 101 101 101
123 123 123 123
124 124 124 124
2 2 2 2
12 12 12 12
9999 9999 9999 9999
114 114 114 114 114 114 123 9999 114 114 114 114 114 114 114
1550 124
2271 114 123 295 124 297 114
9999 2202 295
9999 982 297 2203 2202
116 367 982
117 2209 2203
114 114 367
115 115 115 115 115 115 115
114
115
9999
116
117
114
9999 9999
116 116
117 117
114 114
9999
116
117
114
116
117
114
116 2202 2202 983 982 982 2261 2203 2203
117 2209 2209 367
114 114 114 2209 155 2 2 114 12 12 2 115 115 12 1004 1004 9999 2205 2205 2602 9999 9999 982
2202 2202 2202 2209
982 982 982 982 9999 9999 9999 9999 9999
2203 2203 2203 2203
2209 2209 2209 114 131 131 131 131 131
114 114 114 101 115 115 115 115 115
2 2 2 115 9999 9999 9999 9999 9999
12 12 12
115 115 115
1004 1004 1004
2205 2205 2205
9999 9999 9999
9999 9999 9999 9999 9999 9999 9999 9999
117 117 117 117 117 117 117 117 117 117 117
114 114 114 114 114 114 114 114 114 114 114
114 101 2209
101 2 114
9999 12 115
2201 9999 101
123 123
124 124
115 9999 2
367 12
2209 9999 9999
982 9999
2203
2209
114
115
101
123
124
12
9999
761 761 761 761 761 761 761 761 761 761 761 761
771 771 771 771 771 771 771 771 771 771 771 771
117 117 117 117 117 117 117 117 117 117 117 117
114 114 114 114 114 114 114 114 114 114 114 114
9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999
114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114
101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 2 2 2 2 2 2 2 2 2 2 2 12 12 12 12 12 12 12 12 12 12 12 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999 9999
2 2 2 2 2 2
12 12 12 12 12 12
9999 9999 9999 9999 9999 9999
101 101 101 101 101 101
9999 9999 9999 9999 9999 9999
2201 2201 2201 2201 2201 2201
123 123 123 123 123 123
124 124 124 124 124 124
115 115 115 115 115 115
12 12 12 12 12 12
9999 9999 9999 9999 9999 9999
114 114 114 114 114 114 114 114 114 114 114 114 114
101 101 101 101 101 101 101 101 101 101 101 101 101
123 123 123 123 123
124 124 124 124 124
124 124 124 124 124
131 131 131 131 131
155 155 155 155 155
293 293 293 293 293
295 295 295 295 295
297 297 297 297 297
367 367 367 367 367
982 982 982 982 982
1004 1004 1004 1004 1004
982
2203
114
101
155
115
101
9999
367
2209
155
982
2203
114
155
982
2203
367
2209
115
101
12
155 155
114 114
101 101
2 2
12 12
9999 9999
2602 2602
2201 2201
123 123
124 124
115 115
287 124 114 114
1854 115 101 101
2260 9999
2201 1854
9999 9999
7319 114
7327 9999
7328
7329
7330
9999
139 139 139 9999
114 114 114 7390 9999 9999 9999 9999 7390
100 100 100
9999 9999 9999 116 139 116 116 114 139 139 100 114 114 111 100 100
7390 7390 112 112 112 114 114 114 9999
9999 9999 9999
297 124 9999 114
2202 112
982 114 111 111
2203 114 114 114
367 101 9999
2209 2 12
155 9999
114
101
9999
112
114
9999
139
114
100
9999
367 9999
2209 367 155
1213 2209 115
296 982 101
2202 2203 9999
125 114 313
114 101 2211
115 9999 3002
125 155 9999
114 115 1213
101 101 131
101 983 9999
9999 2261 114 101 131 123 114 124 130 128 9999 115 155 1213 7233
114 114 114
130 130 130
9999 9999 9999
123 101 101 114 114 114 9999 9999 9999
9999 115 115 130 130 130
2 9999 9999 9999 9999 9999
12
9999
1235
9999
1235
5001
114
979
979A
1235
9999
1235
5001
114
979
979A
2204
111
114
115
130
9999
1005 155
2205 114
9999 101
12
9999
7016
7017
7018
7021
7019
9999
9999
112
114
9999 9999 123 9999
367 367 114 9999
2209 2209 9999
982 982
2203 2203 116 123 114
114 114
101 101
9999 9999
114 114 114
1189 130 101
2204 9999 2
112
124
114
367
2209
12
9999
115
9999
1235
5001
114
982 114 979 115 2203
2203 101 979A 101
114 2
101 12 114
9999 101
7319 9999
7326
7327
7328
7329
7330
123
124 114
2 101
12 9999
9999 9999
9999
12
9999 1885E1
9999
2204 597 9999
637 131
111 640 115
112 9999
114 111 9999
130 112
9999 114
130
9999
982
367
1718A
597
637
640
111
112
114
130
9999
130
114
9999
114
101
9999
131
2206
2201
367
2209
982
115
115
9999
112
293 7330 7330 7329
295 116 116 7330
297 155 155 116
2206 128 128 123
2202
155
12
2602
2201
124
124
128
7328
7329
7330
116
102 9999 102 102 114 102 114 114 9999 114
114 9999 9999 9999
9999
7330
116
1007
1010
1020
1221
2205
103
139
100
4202
12
126
125
100
114
9999
126 101 128 102 9999
100
114
115
101
128
102
131 131 131 131
115 115 115 115
9999 9999 9999 9999
9999 9999 9999 9999
2204 2204 2204 2204
111 111 111 111
114 114 114 114
9999 9999 9999 9999
131
823 115
9999 9999
9999 9999
131
115
9999
9999
112 112
114 114
130 130
9999 9999
12
9999
100
295 123 2
297 124 12
2202 2 115
982 12
2203 4202
367 9999
2209 131
115
114 9999
115
101
9999
9999
103
116
114
9999
9999
115
9999 9999 124
124 114
114 101
101 139
139 127
127 2
2 13
13 9999
9999
2203
114
101
9999
9999
295
297
2202
982
2203
367
2209
124
12
101
9999
9999
114
101
9999
9999
114
101
9999
9999
139
13
9999
9999 9999 9999 9999
9999 131 131
131 115 115
115 9999 9999
9999 9999 9999
9999
1213 114 101
9999
124
114
101
114 114
155 101
115 9999
101
9999
9999 155
367 115 101
2209 9999 367
983
2261 2209
124 124
128 128
9999 9999
9999 9999
9999 9999
131
115
101
9999
9999
776
9999
9999
141
115
9999
101
777
9999
155
114
101
9999
123
114
113 7330 1235 116 1235 114 316
101
1235
364
365
9999
314
9999
370
9999
131
1007
2205
2209
983
2261
114
101
9999
9999
124
128
9999
9999
9999
12 12 12 12
9999 9999 9999 9999
116 116 116 116
117 117 117 117
114 114 114 114
116 116 116 116
117 117 117 117
114 114 114 114
115 2209
101 114
123 115
124 101
2 123
12 124
9999 2
116 12
117 9999
114
102 102 2203
114 114 2201
7342 7342 123
7343 7343 124
116 116 2209
114 114 155
1007 1007 1305
2205 2205 297
116 116 2205
103 103 102
114 114 1004
102 102 102
114 114 114
7342 7342 7342
7343 7343 7343
116 116 116
114 114 114
1007 1007 1007
2205 2205 2205
116 116 116
103 103 103
114 114 114
114
101
9999
155
115
9999
9999
155 155 155 155 155 155
115 115 115 115 115 115
101 101 101 101 101 101
9999 9999 9999 9999 9999 9999
3 3 3 3 3 3
155 155 155 155 155 155
114 114 114 114 114 114
101 101 101 101 101 101
9999 9999 9999 9999 9999 9999
1179 1179 1179 1179 1179 1179
1007 1007 1007 1007 1007
1224 1224 1224 1224 1224
1356 1356 1356 1356 1356
2201 2201 2201 2201 2201
2202 2202 2202 2202 2202
2203 2203 2203 2203 2203
2205 2205 2205 2205 2205
2206 2206 2206 2206 2206
2209 2209 2209 2209 2209
2209 2209 2209 2209 2209
2209 2209 2209 2209 2209
115
9999
367
2209
982
2203
114
101
155 155
115 115
101 101
367 367
2209 2209
155 155
115 115
9999 9999
295 295
297 297
2202 2202
116
114
4202
131
115
1007
2205
103
367
2209
982
114 111 111
9999 114 114
9999 9999
12
9999
9999 9999 114 367 130 2209 9999 155 115 9999
102
114
9999
131
9999 9999
983
2261
114
101
9999
9999
116
114
983
2261
123
128
131
125
155
9999
123
124
12
9999
9999
115
114 155 115
101
9999 9999 9999
9999
9999
103
4202 4202 1007
131 131 2205 116
115 115 103 114 4202 9999 131 115 7342 7343
4202 4202 4202
131 131 131
115 115 115
101 101 101 101 101 101
777 777 777 777 777 777
9999 9999 9999 9999 9999 9999
155 155 155 155 155 155
114 114 114 114 114 114
101 101 101 101 101 101
9999 9999 9999 9999 9999 9999
123 123 123 123 123 123
114 114 114 114 114 114
2261 2261 2261 2261 2261
4202 4202 4202 4202 4202
7342 7342 7342 7342 7342
7343 7343 7343 7343 7343
9999 9999 9999 9999 9999
123 123
124 124
982 982
2203 367 2209 2203 367 2209
114 155 114
115 101
101 2
123 12
124 9999
2 115
2203
101
7326
293
295
297
2206
2202
155
12
155 155 155 155 155 155
115 115 115 115 115 115
101 101 101 101 101 101
9999 9999 9999 9999 9999 9999
367 367 367 367 367 367
2209 2209 2209 2209 2209 2209
983 983 983 983 983 983
2261 2261 2261 2261 2261 2261
114 114 114 114 114 114
101 101 101 101 101 101
9999 9999 9999 9999 9999 9999
1354 1354
9999 9999
9999 9999
9999 9999
12
9999
9999 9999
115 115
7342 7342
7343 7343
116 116
114 114
1007 1007
2205 2205
116 116
2602
2201
124
983
2261
123
128
05.022.0 1
2602
2201
123
9999 9999 9999 9999 9999 9999
155 155 155 155 155 155
114 114 114 114 114 114
101 101 101 101 101 101
9999 9999 9999 9999 9999 9999
1179 1179 1179 1179 1179 1179
101 101 101 101 101 101
777 777 777 777 777 777
9999 9999 9999 9999 9999 9999
103 103
114 114
124
115
9999
123
124
114
115
155 155 155 155 155 155
114 114 114 114 114 114
101 101 101 101 101 101
9999 9999 9999 9999 9999 9999
123 123 123 123 123 123
114 114 114 114 114 114
DEVIATION STATEMENT NO. - III

Construction of 09 Nos. Residential quarters (Type-III/06 Nos. & Type-II/03 Nos.) for Central School of Tibetans Department's at Kalimpong (West Bengal) including internal water supply and sanitary installations. 1. Agency: 2. Agrt No. 3. Estimated Cost 4. Stipulated D.O.S. 5. Stipulated D.O.C.
M/s Mazumdar Construction 99/EE/CE/2009-10 38,451,764 29.01.2010 28.11.2010
6. Actual D.O.C. : 7. Tendard amount: Rs 8. Clause 12.1.2(iii) : 9. Rebate : 10. Add VAT + Cess =
17.03.2011 49,260,032 42.35% above DSR'07 0.50% 1.00%
10. Ref: to PREVIOUS SANCTION Deviation Statt. No.I for Rs. Deviation Statt. No.II for Rs. Deviation Statt. No.III for Rs.
(By AE) (By EE) (By SE)
PRINT RATE ANALYSIS
BACK UP
Remarks.
AMOUNT OF THIS STATEMENT Rs. 25502555.00

Sl. Agmt. DSR'07 Select No. Item Item No. 100% No. Or 30% Description of Item Qty. Unit. AS PER AGREEMENT Rate. Rate after rebate Amount
Total Qty. as per execution
Market RATE for AMOUNT OF DEVIATION (EXCESS) Rate EXCESS SAVINGS Including Deviation of Deviation of Deviation of Quantity Amount Deviation of Deviation Deviation of VAT and qty. upto of qty. qty. upto qty. beyond qty. upto 100% qty. beyond Labour 100% or beyond 100% or 100% or or 30% 100% or 30% Cess 30% 100% or 30% (Rate 30% 30% after rebate) (Payable rate)
ACTUAL DEVIATION
1a
2a
6a
10 {(8-9)-4} 5350
11
12
13
14 (9x12) 76,615.00
15 (10x13) 452,825.32
16
1.3
2.25
100
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Supplying and filling in plinth with fine sand under floors including, watering, ramming consolidating and dressing complete. Supplying & filling in plinth with river bed local coarse sand in layers including watering, ramming consolidating upto desire density and dresing as per CPWD specification with mechanical transport including loading and unloading upto all lead and lift etc. complete as per direction of Engineer-in-charge. Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) Centering and shuttering including strutting, propping etc. and removal of form for : Weather shade, Chajjas, corbels etc., including edges. Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
1100
cum
70.00
69.65
76615.00
7550
1100
84.64
69.65
84.64
1.4
2.27
100
600
cum
400.00
398.00
238800.00
1175
575
398.00
228,850.00
1.5
2.27.E
100
5250
cum
390.00
388.05
2037262.50
10485
5235
388.05
2,031,441.75
2.1
4.1
2.1.1 5 3.2 3.2.9 6 3.3
4.1.10 5.9 5.9.19 5.22
30
380
cum
2900.00
2885.50
1096490.00
550
114
56
3,245.40
2,885.50
3,245.40
328,947.00
181,742.22
30
550
sqm
300.00
298.50
164175.00
870
165
155
413.56
298.50
413.56
49,252.50
64,102.46
Page 581 of 1096
AE(P)
EE(P n A)
Sl. Agmt. DSR'07 Select No. Item Item No. 100% No. Or 30%
Description of Item Qty. Unit.
AS PER AGREEMENT Rate. Rate after rebate Amount
Market RATE for AMOUNT OF DEVIATION (EXCESS) Rate EXCESS SAVINGS Quantity Amount Deviation of Deviation Including Deviation of Deviation of Deviation of Deviation of VAT and qty. upto of qty. qty. upto qty. beyond qty. upto 100% qty. beyond Labour 100% or beyond 100% or 100% or or 30% 100% or 30% Cess 30% 100% or 30% (Rate 30% 30% after rebate) (Payable rate)
ACTUAL DEVIATION
Remarks.
1a 3.3.1 3.3
2 5.22.6 5.22A
2a 100
3 Thermo-Mechanically Treated bars. Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars. Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete work including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement. including Admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. M-25 grade reinforced cement concrete by using 380kg. of cement per cum of concrete. All work above plinth level up to floor V level. Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to welding. steel windows by
4 101570
5 kilogram
6 55.00
6a 54.73
7 5558418.25
8 118000
9 16430
10 {(8-9)-4}
11
12 54.73
13
14 (9x12) 899,131.75
15 (10x13)
16
3.3.2 7 3.4
5.22A.6 5.33.A
30 30
321630 750
kilogram cum
55.00 5600.00
54.73 17601201.75 5572.00 4179000.00
444000 1180
96489 225
25881
62.88
54.73 5572.00
62.88 5471.00
5280360.53 1253700.00
1627374.19 1121554.69
205 5,471.00
4.2
6.4
4.2.1 9 4.3
6.4.2 6.13
30
151
cum
3700.00
3681.50
555906.50
2100
45.3
1903.7 3,166.02
3681.50
3166.02
166771.95
6027157.21
4.3.1 10 5.6
6.13.2 9.48
30
2815
sqm
57.00
56.72
159652.73
3755
844.5
95.5
417.11
56.72
417.11
47895.82
39834.21
5.6.1
9.48.1
30
19150
kg
75.00
74.63
1429068.75
23515
4365
74.63
325738.13
Page 582 of 1096
AE(P)
EE(P n A)
ACTUAL DEVIATION
Remarks.
1a
2 10.11
2a 30
3 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators side /top /centre hung with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer , but excluding the cost of other fittings, complete all as per approved design (sectional weight of only steel members shall be measured for payment). Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick. Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
4 11865
6 225.00
6a 223.88
7 2656276.88
8 27422
11 6.2
10 {(8-9)-4} 3559.5 11997.5
11 0.00
12 223.88
13 0.00
14 (9x12) 796883.06
15 (10x13) 0.00
16
12 6.7
10.25
6.7.1 13 7.4
10.25.2 11.26
30
8760
kg
80.00
79.60
697296.00
11500
2628
112
78.66
79.60
78.66
209188.80
8810.40
7.4.1 14 7.5
11.26.1 11.27
30 30
750 330
sqm sqm
1200.00 1280.00
1194.00 1273.60
895500.00 420288.00
1350 520
225 99
375 91
946.58 955.93
1194.00 1273.60
946.58 955.93
268650.00 126086.40
354967.03 86989.81
Page 583 of 1096
AE(P)
EE(P n A)
ACTUAL DEVIATION
Remarks.
1a
2 11.36
2a 30
3 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. Providing and fixing 20mm thick mirror polished,machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, cutting etc. complete at all levels.
4 2320
5 sqm
6 800.00
6a 796.00
7 1846720.00
8 3360
15 7.7
10 {(8-9)-4} 696 344
11 719.05
12 796.00
13 719.05
14 (9x12) 554016.00
15 (10x13) 247351.63
16
16 7.8
8.2.A
17 9.1 18 9.3 9.3.1 19 9.4
8.2.A.1 13.1 13.1.2 13.16 13.16.1 13.26A
30 30 30 30
Kota stone slab 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) 6 mm cement plaster of mix : 1:3 (1 cement: 3 fine sand) Providing and applying Birla, J.K. white or equivalent wall putty of 1.5 mm thickness over plastered surface to prepare the surface even and smooth complete
130 13850 4800 19000
sqm sqm sqm sqm
1300.00 100.00 100.00 90.00
1293.50 99.50 99.50 89.55
168155.00 1378075.00 477600.00 1701450.00
315 19300 11800 27700
39 4155 1440 5700
146 1,806.36 1295 5560 3000 112.02 101.23 106.29
1293.50 99.50 99.50 89.55
1806.36 112.02 101.23 106.29
50446.50 413422.50 143280.00 510435.00
263728.13 145069.13 562863.95 318868.56
Page 584 of 1096
AE(P)
EE(P n A)
ACTUAL DEVIATION
Remarks.
1a
2 22.7
2a
3 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-inCharge :
6a
10 {(8-9)-4}
11
12
13
14 (9x12)
15 (10x13)
16
20 13.2
Page 585 of 1096
AE(P)
EE(P n A)
ACTUAL DEVIATION
Remarks.
1a
2a 30
3 With average thickness of 120mm and minimum thickness at khurra as 65 mm.
4 1680
5 sqm
6 570.00
6a 567.15
7 952812.00
8 2100
9 420
10 {(8-9)-4}
11
12 567.15
13
13.2.1 22.7.1
14 (9x12) 238203.00
15 (10x13)
16
Page 586 of 1096
AE(P)
EE(P n A)
ACTUAL DEVIATION
Remarks.
1a
2a
6a
10 {(8-9)-4}
11
12
13
14 (9x12)
15 (10x13)
16
44290763.35 Note: 1 The rates are net and final and nothing extra to be added towards contractors enhancement or abatements. 2 Payment will be made for the quantities actually executed and measured at site. 3 This statement contains 20.00 item only. 4 The percentage of deviation statement is 51.77% of tendered amount.
Net Amount = Total Deviation (X+Y) = Total Savings i.e. (Z) = Net Deviation i.e. (X+Y+Z) =
13,999,316 (X) 25,502,555 0.00 25,502,555
11,503,239 (Y)
0.00 (Z)
DEVIATION STATEMENT NO. - III amounting to Rs. is heryby sanctioned

Assistant Engineer(P) Siliguri Central Circle (EZ) CPWD, Siliguri
No To, Executive Engineer SCD Date:
25,502,555.00
Executive Engineer(P&A) Siliguri Central Circle (EZ) CPWD, Siliguri
Superintending Engineer Siliguri Central Circle (EZ) CPWD, Siliguri
Executive Engineer (P&A)
Page 587 of 1096
AE(P)
EE(P n A)
EXTRA ITEM STATEMENT NO. IV 1.
PRINT RATE ANALYSIS
Construction of 09 Nos. Residential quarters (Type-III/06 Nos. & Type-II/03 Nos.) for Central School of Tibetans Department's at Kalimpong (West Bengal) including internal water Previous sanction : 49,260,032 E.I. Statt. No.-I (by EE) for ` 42.35% % above DSR'07 E.I. Statt. No.-II (by AE) for ` 0.50% % E.I. Statt. No.-III (by EE) for ` 3879136.00 Amount VAT+ Cess Remarks
2. Agency: 3. Agmt No. 4. Estimated Cost-Rs.
M/s Mazumdar Construction 99/EE/CE/2009-10 38451764
5. Tendard amount: Rs. 6. Clause 12.1.2(iii) : 7. Rebate : -
3,811,320.00 66,108.00 1,119,227.00 1.00%
Amount of this statement : Rs. Item No. DSR Code Description of item Qty. Rate ( i.e. VAT and Labour Cess) Unit
2.27.A
Supplying & filling with carried earth by mechanical transport i/c royality & cost of earth, excavation at source, loading into truck, unloading the same at site, banking the earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling, each layer with tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8-10 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, upto all lead & lift, all as per direction of Engineer-incharge.
6000.00
328.03
cum
1,968,167.00
2.21
Open timbering in case of shafts, wells, cesspits, manholes and the like including strutting and shoring complete (Measurements to be taken of the face area timbered): Depth exceeding 1.5 m but not exceeding 3 m. Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 : 540.00 0.00 sqm -
2.21.2 18.27
Page 588 of 1096
AE(P)
EE(P n A)
Item No. DSR Code
Description of item
Qty.
Rate ( i.e. VAT and Labour Cess) 1487.74 2535.39
Unit
Amount
Remarks
18.27.3 18.27.4 17.39 17.39.2 17.39.2.2 17.50 17.50.1 17.50.1.2 17.48 17.48.1 17.48.1.2
150 mm dia. pipe 200 mm dia. pipe Providing and fixing plain bend of required degree. 75 mm Sand cast iron S&S as per IS - 3989 100x100x100 mm Sand cast iron S&S as per IS - 3989 Providing and fixing single unequal plain junction of required degree : 100x100x75 mm Sand cast iron S&S as per IS - 3989
71.00 35.00
metre metre
105,630.00 88,739.00
60.00
224.16
each
13,449.00
32.00
479.24
each
15,336.00
45.00
672.80
each
30,276.00
Page 589 of 1096
AE(P)
EE(P n A)
Item No. DSR Code
Description of item
Qty.
Rate ( i.e. VAT and Labour Cess)
Unit
Amount
Remarks
22.7
22.7.1
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of twoof 120mm curing and for With average thickness weeks for and minimum final test. All khurra as 65 mm. to be done in order thickness at above operations and as directed and specified by the Engineer-inCharge :
935.00
771.68
sqm
721,524.00
Page 590 of 1096
AE(P)
EE(P n A)
Item No. DSR Code
Description of item
Qty.
Unit
Amount
Remarks
11.15
Crazy marble stone flooring, including filling the gaps with light shade pigment with white cement marble powder mixture (3 parts of white cement : 1 part of marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 white, black or white and black marble chips of sizes from 1mm to 4mm nominal size by volume), with under layer 25mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size), including rubbing, polishing and cement slurry etc. complete : 18 mm thick crazy marble stone white, black or as specified. Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete. Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes. 75 mm diameter 110 mm diameter 60.00 150.00 126.17 203.87 metre metre 7,570.00 30,580.00 210.00 142.00 738.06 968.22 sqm sqm 154,994.00 137,487.00
11.15.1 9 11.40
10
12.41
12.41.1 12.41.2
Page 591 of 1096
AE(P)
EE(P n A)
Item No. DSR Code
Description of item
Qty.
Unit
Amount
Remarks
11
12.42
Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 75 mm 110 mm Providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-inCharge. Marble work Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete. 42.00 104.00 128.43 128.43 each each 5,394.00 13,356.00
12.43
12
12.43.1 12.43.2 8.3
13 14
8.3.1 11.31 8.5
105.00 132.00 6.00
106.78 52.97 283.89
metre metre each
11,212.00 6,992.00 1,703.00
Page 592 of 1096
AE(P)
EE(P n A)
Item No. DSR Code
Description of item
Qty.
Unit
Amount
Remarks
15
9.17
Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : 18 mm thick 30 mm thick plain PVC door shutters. French spirit polishing : Two or more coats on new works including a coat of wood filler. 2nd class teak wood 50x12 mm Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to 250x10 mm 150x10 mm 100x10 mm Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer-in-charge complete. 255 X 19 mm Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete. Anodized (AC 15) aluminium 30.00 65.00 595.00 574.61 2524.19 138.84 sqm sqm sqm 17,238.00 164,072.00 82,607.00
16 17
9.17.2 9.120 9.120.1 13.68 13.68.1 9.40 9.40.1 9.40.1.1 9.97
18
630.00
99.30
metre
62,561.00
19
20
9.97.2 9.97.4 9.97.5 21.11
20.00 272.00 303.00
86.53 59.13 46.71
each each each
1,731.00 16,085.00 14,152.00
21
21.11.2 21.15
636.00
232.10
each
147,614.00
21.15.1
621.00
51.02
each
31,685.00
Page 593 of 1096
AE(P)
EE(P n A)
Item No. DSR Code
Description of item
Qty.
Unit
Amount
Remarks
22
21.3
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness With float glass panes of 8 mm thickness 25.00 11.00 728.35 979.35 sqm sqm 18,209.00 10,773.00
21.3.1 21.3.3
Total = Rs. 3,879,136.00 Note: 1 The rates are net and final and nothing extra to be added towards contractors enhancement or abatements. 2 Payment will be made for the quantities actually executed and measured at site. 3 This statement contains item only. 22 4 The percentage of this extra item statement is 7.87% of tendered amount EXTRA ITEM STATEMENT NO. IV is hereby sanctioned amounting to Rs. 3,879,136.00
Assistant Engineer (P) Siliguri Central Circle (EZ) CPWD, Siliguri. No To, Executive Engineer SCD
Executive Engineer (P&A) Siliguri Central Circle (EZ) CPWD, Siliguri. Date:
Superintending Engineer Siliguri Central Circle (EZ) CPWD, Siliguri.
Page 594 of 1096
AE(P)
EE(P n A)
Item No. DSR Code
Description of item
Qty.
Unit
Amount
Remarks
Page 595 of 1096
AE(P)
EE(P n A)
Market Rate Analysis and Justification Statement
SUBSTITUTE ITEM STATEMENT NO. - I

1 Construction of 09 Nos. Residential quarters (Type-III/06 Nos. & Type-II/03 Nos.) for Central School of Tibetans Department's at Kalimpong (West Bengal) PRINT RATE ANALYSIS including internal water supply and sanitary installations. Previous sanction : E.I. Statt. No.- I for Rs. E.I. Statt. No.- II for Rs. E.I. Statt. No.- III for Rs. E.I. Statt. No.- IV for Rs. VAT+ Cess Description of Item Qty.
2. Agency: - M/s Mazumdar Construction 3. Agmt No. 99/EE/CE/2009-10 4. Estimated Cost : Rs.38,451,764.00
5. Tendard amount: Rs. 6. Clause 12.1.2 (iii) : 7. Rebate : -
49,260,032 42.35% 0.50%
1,019,030 (by EE)
Amount of this statement :

Sl. No. Agmt. Item No. 2 4.1 DSR Code Description of Item Qty.
Rs.4,875,100.00
DSR Code
AS PER AGGREMENT Unit Rate (i.e. rebate) 7 Amount
AS PER WORK ACTUAL Unit

Rate including VAT and Cess
Remarks.
Amount
1 1
3 6.1
4
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 cement : 6 coarse sand)
9 4.1
10
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
11
12
13
14
15
4.1.1
6.1.2
(1 850.00
cum 2794.40
2375240.00 4.1.5
310
cum
4099.86
1270958.00
7.1
11.9
40 mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 6mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 1mm to 4mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume including cement slurry etc.
Page 597 of 1096
AE(P)
EE(P n A)
Sl. No.
Agmt. Item No. 2 7.1.1
DSR Code
Description of Item Qty.
AS PER AGGREMENT Unit Rate (i.e. rebate) 7 449.10 Amount
DSR Code

Remarks.
Amount
1 a
3 11.9.5
Light shade pigment with 4980.00 ordinary cement.
6 sqm
8 9 2236518.00 11.37
10
Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete.
11 4400
12 sqm
13 737.92
14 3246834.00
15
7.2
7.2.1
(i)
7.2.1.1
Marble chips skirting (up to 30 cm height) rubbed and polished to granolithic finish, top layer 6 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from smallest to 4 mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume : 11.12.1 18 mm thick with under layer 12 mm thick in cement plaster 1:3 (1 cement : 3 coarse sand) : 11.12.1. Dark shade pigment with 620.00 ordinary cement. 1
11.12
sqm
399.20
247504.00 11.36
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-inCharge, in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with
700
sqm
510.44
357308.00
Page 598 of 1096
AE(P)
EE(P n A)
Sl. No.
Agmt. Item No. 2 Note: 1 2 3 4
DSR Code
AS PER AGGREMENT Unit Rate (i.e. rebate) 7 Total = Amount
DSR Code

Remarks.
Amount
8 4859262.00
10
11
12
13
14 4875100.00
15
The rate is net and not subject to any contractor's enhancement or abatments. Payment shall be made as per actual execution and recorded in M.B. 3 item only. This statement contains The percentage of substitute item statement is 9.90% of tendered amount.
SUBSTITUTE ITEM STATEMENT NO. - I
is hereby sanctioned amounting to
Rs. 4,875,100.00
No To,
Assistant Engineer (P) Siliguri Central Circle (EZ) CPWD, Siliguri Date: Executive Engineer SCD
Executive Engineer (P&A) Siliguri Central Circle (EZ) CPWD, Siliguri
Superintending Engineer Siliguri Central Circle (EZ) CPWD, Siliguri
Page 599 of 1096
AE(P)
EE(P n A)
Agmt Item No.
Agmt Rate
Original Item Difference Market Price of Rates
New Item Market Price
Rate to Be paid on substitution
(2-3)
(4+5)
4.1
4.1.1
2794.40
2575.09
219.31
3880.56
4099.86
7.1
Page 600 of 1096
AE(P)
EE(P n A)
Agmt Item No.
Agmt Rate
(2-3)
(4+5)
7.1.1
449.10
462.32
-13.22
751.14
737.92
7.2
7.2.1
7.2.1.1
399.20
600.69
-201.49
711.93
510.44
Page 601 of 1096
AE(P)
EE(P n A)
Agmt Item No.
Agmt Rate
(2-3)
(4+5)
Page 602 of 1096
AE(P)
EE(P n A)
DSRNo
Sub Head Details of Item
Unit
2 2.1
Earth Work Earth Work
EARTH WORK
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth upto 50 m and lift upto 1.5 m, disposed soil to be levelled and neatly dressed : All kinds of soil Earth work in rough excavation, banking excavated earth in layers not exceeding 20 cm in depth, breaking clods watering, rolling each layer with tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and lift upto 1.5 m: All kinds of soil Banking excavated earth in layers not exceeding 20 cm. in depth, breaking clods, watering, rolling each layer with tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m. All kinds of soil Deduct for not rolling with power roller of minimum 8 tonnes for banking excavated earth in layers not exceeding 20 cm in depth. Deduct for not watering the excavated earth for banking Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kinds of soil Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed. Ordinary rock Hard rock (requiring blasting) Hard rock (blasting prohibited) Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. Excavation work in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m. Ordinary rock Hard rock (requiring blasting) Hard rock (blasting prohibited)
2.1.1 2.2
100sqm
2.2.1 2.3
cum
2.3.1 2.4 2.5 2.6
cum cum cum
2.6.1 2.7
cum
2.7.1 2.7.2 2.7.3 2.8
Earth Work Earth Work Earth Work Earth Work
cum cum cum
2.8.1 2.9
cum
2.9.1 2.9.2 2.9.3
Earth Work Earth Work Earth Work
cum cum cum
2.10
Earth Work
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil Pipes, cables etc, not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm. Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth upto 1.5 metre). Extra for excavating trenches for pipes, cables, etc, in all kinds of soil for depth exceeding 3 m in depth, but not exceeding 4.5 m. (Rate is over corresponding basic item for depth upto 1.5 metre.) Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth including consolidating each deposited layers by ramming, watering etc. stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50m : Ordinary rock : Pipes, cables etc. not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia. Pipes, cables exceeding 300 mm dia but not exceeding 600mm dia Hard rock (requiring blasting) Pipes, cables etc. not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. Pipes, cables etc. exceeding 300 mm dia but not exceeding 600mm dia Hard rock (blasting prohibited) Pipes, cables etc. not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. Pipes, cables etc. exceeding 300 mm dia but not exceeding 600mm dia. Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock exceeding 1.5 m in depth but not exceeding 3 m. (Rate is over corresponding basic item for depth upto 1.5 metre.) Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock exceeding 3m in depth but not exceeding 4.5 m. (Rate is over corresponding basic item for depth upto 1.5 metre.) Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered). Depth not exceeding 1.5 m. Depth exceeding 1.5 m but not exceeding 3 m. Depth exceeding 3 m but not exceeding 4.5 m. metre metre metre metre metre
2.10.1 2.10.1.1 2.10.1.2 2.10.1.3 2.11 2.12 2.13
Earth Work
Earth Work
2.13.1 2.13.1.1 2.13.1.2 2.13.1.3 2.13.2 2.13.2.1 2.13.2.2 2.13.2.3 2.13.3 2.13.3.1 2.13.3.2 2.13.3.3 2.14 2.15 2.16 2.16.1 2.16.2 2.16.3
metre metre metre metre metre metre
Earth Work
metre metre metre metre metre
Earth Work
Earth Work
Earth Work
Earth Work
sqm sqm sqm
2.17
Earth Work
Close timbering in case of shafts, wells, cesspits, manholes and the like including strutting, shoring and packing cavities (wherever required) etc. complete. (Measurements to be taken of the face area timbered). Depth not exceeding 1.5 m. sqm Depth exceeding 1.5 m but not exceeding 3 m. sqm Depth exceeding 3 m but not exceeding 4.5 m. sqm Close timbering over areas including strutting, shoring and packing, cavities (wherever required) etc. complete. (Measurements to be taken of the face area timbered) : Depth not exceeding 1.5 m. sqm Depth exceeding 1.5 m but not exceeding 3 m. sqm Depth exceeding 3 m but not exceeding 4.5 m. sqm Extra for planking, strutting and packing materials for cavities (in close sqm timbering) if required to be left permanently in position. (Face area of timber permanently left to be measured). Open timbering in trenches including strutting and shoring complete (measurements to be taken of the face area timbered): Depth not exceeding 1.5 m. sqm Depth exceeding 1.5 m but not exceeding 3 m. sqm Depth exceeding 3 m but not exceeding 4.5 m. sqm Open timbering in case of shafts, wells, cesspits, manholes and the like including strutting and shoring complete (Measurements to be taken of the face area timbered): Depth not exceeding 1.5 m. sqm Depth exceeding 1.5 m but not exceeding 3 m. sqm Depth exceeding 3 m but not exceeding 4.5 m. sqm Open timbering over areas including strutting, shoring etc. complete. (Measurements to be taken of the face area timbered): Depth not exceeding 1.5 m. sqm Depth exceeding 1.5 m but not exceeding 3 m. sqm Depth exceeding 3 m but not exceeding 4.5 m. sqm Extra for planking and strutting in open timbering if required to be left sqm permanently in position. (Face area of the timber permanently left to be measured). Extra rates for quantities of works, executed: In or under water and/or liquid mud, including pumping out water as metre depth required. In or under foul position, including pumping out water as required. metre depth Note for item no. 2.24:- The extra percentage rate is applicable in respect of each item but limited to quantities of work executed in these difficult conditions. The unit, namely, metre depth, to be considered for payment, shall be the depth measured from the sub soil water level upto the centre of gravity of the quantity executed in difficult conditions. The depth shall be reckoned correct to 0.1 metre, 0.05 metre or more shall be taken as 0.1 metre and less than 0.05 metre ignored. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Extra for every additional lift of 1.5 m or part thereof in. All kinds of soil. Ordinary or hard rock. cum
2.17.1 2.17.2 2.17.3 2.18 2.18.1 2.18.2 2.18.3 2.19 2.20 2.20.1 2.20.2 2.20.3 2.21 2.21.1 2.21.2 2.21.3 2.22 2.22.1 2.22.2 2.22.3 2.23 2.24 2.24.1 2.24.2
Earth Work
Earth Work
Earth Work
2.25
Earth Work
2.26 2.26.1 2.26.2
cum cum
2.27 2.28 2.28.1 2.29 2.29.1 2.30
Earth Work
Earth Work
2.30.1 2.30.2 2.30.3 2.30.4 2.31
Earth Work Earth Work Earth Work Earth Work Earth Work
2.32 2.33
Earth Work
Earth Work
Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming, consolidating and dressing complete. Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m. All kinds of soil. Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the same. All kinds of soil. Excavating holes upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil; as directed within a lead of 50 m and lift upto 1.5 m. All kinds of soil. Ordinary rock Hard rock (requiring blasting) Hard rock (blasting prohibited) Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared. Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 30 cm girth upto and including 60 cm girth Beyond 60 cm girth upto and including 120 cm girth Beyond 120 cm girth upto and including 240 cm girth Above 240 cm girth Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20% Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall & rodding etc. complete: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor : With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.
cum
100sqm
100sqm
each each each each 100sqm
100sqm
2.33.1 2.33.2 2.33.3 2.33.4 2.34 2.34.1 2.35 2.35.1
Earth Work Earth Work Earth Work Earth Work Earth Work
each each each each
litre
Earth Work
2.35.1.1 2.35.2 2.35.2.1 2.35.3
metre
metre
2.35.3.1
Earth Work
sqm
2.35.4
Earth Work
2.35.4.1 2.35.5
2.36 2.37 2.38
Earth Work
Earth Work
Earth Work
Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole : With Chlorpyriphos/Lindane E.C. 20% with 1% concentration. Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. Deduct for disposed soil not levelled and neatly dressed (against Item No. 2.6,&2.7) Supply and stacking of Fly ash conforming to IRC- 58 at site including carriage, loading , unloading & stacking up to any lead (measured stacks will be reduced by 20% for payment). Filling with available fly ash and earth (excluding rock) in trenches or embankment in layers (each layer should not exceed 15 cm), with intermediate layer of compacted earth (Soil density of 98%) after every four layers of compacted depth of fly ash, sides & top layer of filling shall be done with earth having total minimum compacted thickness 30 cm or as decided by Engineer in-charge, including compacting each layer by rolling/ ramming and watering , all complete as per drawing and direction of Engineer -in - charge.
metre metre
cum cum cum
3 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.1 3.11 3.12 3.13 3.14 3.15 3.16 3.17 3.18 3.18 4
MORTARS MORTARS MORTARS MORTARS MORTARS MORTARS MORTARS MORTARS MORTARS MORTARS MORTARS MORTARS MORTARS MORTARS MORTARS MORTARS MORTARS MORTARS MORTARS MORTARS MORTARS
MORTARS
Note : These rates are exclusive of water charges, overhead and contractors profit. (1 cement : 1 fine sand) Cement Mortar 1:1 Cement mortar 1:2 (1 cement : 2 fine sand). Cement mortar 1:3 (1 cement : 3 fine sand). Cement mortar 1:4 (1 cement : 4 fine sand). Cement mortar 1:5 (1 cement : 5 fine sand). Cement mortar 1:6 (1 cement : 6 fine sand). Cement mortar 1:2 (1 cement : 2 coarse sand). Cement mortar 1:3 (1 cement : 3 coarse sand). Cement mortar 1:4 (1 cement : 4 coarse sand). Cement mortar 1:5 (1 cement : 5 coarse sand). Cement mortar 1:6 (1 cement : 6 coarse sand). Cement mortar 1:2 (1 cement : 2 stone dust). Cement mortar 1:2 (1 cement : 2 marble dust). Cement mortar 1:5 (1 cement : 5 marble dust). White cement mortar 1:2 (1 white cement : 2 marble dust). White cement mortar 1:3 (1 white cement : 3 marble dust). White cement mortar 1:5 (1 white cement : 5 marble dust). Mud mortar Mortar in lime , surkhi ( 50% red and 50% light yellow) and marble dust 1:1.5:0.5 cum cum cum cum cum cum cum cum cum cum cum cum cum cum cum cum cum cum cum
CONCRETE WORK CONCRETE WORK CONCRETE WORK CONCRETE WORK
CONCRETE WORK
CEMENT CONCRETE (CAST IN- SITU) Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1:2 (1 Cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size)
4.1 4.1.1
CONCRETE WORK
cum
4.1.2 4.1.3 4.1.4 4.1.5 4.1.6 4.1.7 4.1.8 4.1.9 4.1.10 4.1.11 4.1.12 4.1.13 4.2
CONCRETE WORK CONCRETE WORK CONCRETE WORK CONCRETE WORK CONCRETE WORK CONCRETE WORK CONCRETE WORK CONCRETE WORK CONCRETE WORK CONCRETE WORK CONCRETE WORK CONCRETE WORK CONCRETE WORK
1:1:3 (1 Cement: 1 coarse sand: 3 graded stone aggregate 20 nominal size). 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 nominal size) 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 40 nominal size). 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 nominal size). 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40 nominal size).
mm mm mm mm mm
cum cum cum cum cum cum cum cum cum cum cum cum
4.2.1 4.2.2 4.2.3 4.2.4 4.2.5 4.2.6 4.2.7 4.2.8 4.3 4.3.1 4.3.2 4.3.3 4.4
CONCRETE WORK CONCRETE WORK CONCRETE WORK CONCRETE WORK CONCRETE WORK CONCRETE WORK CONCRETE WORK CONCRETE WORK CONCRETE WORK CONCRETE WORK CONCRETE WORK CONCRETE WORK CONCRETE WORK
1:3:6 (1 Cement : 3 fine sand : 6 graded stone aggregate 40 mm nominal size). 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). 1:4:8 (1 cement : 4 fine sand : 8 graded stone aggregate 40 mm nominal size) 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) 1:2:3:9 (1 ordinary portland cement : 2 Fly ash : 3 coarse sand : 9 graded stone aggregate 40 mm nominal size). 1:2:4:11 (1 ordinary portland cement : 2 fly ash : 4 coarse sand : 11 graded stone aggregate 40 mm nominal size) Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets etc. up to floor five level, excluding the cost of centering, shuttering and finishing : 1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size) 1:1:3 (1 cement:1 coarse sand:3 graded stone aggregate 20 mm nominal size). 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size). 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size). 1:3:6 (1 cement : 3 fine sand : 6 graded stone aggregate 40 mm nominal size). 1:5:10 (1 cement : 5 course sand : 10 graded stone aggregate 40 mm nominal size). Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns. Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets etc. Columns, piers, abutments, pillars, posts and struts. Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing.
cum cum cum cum cum cum cum cum
sqm sqm sqm
4.4.1 4.4.2
4.5
4.5.1 4.5.2 4.5.3 4.6
4.6.1 4.7
CONCRETE WORK CONCRETE WORK
4.7.1 4.7.2 4.8
CONCRETE WORK CONCRETE WORK CONCRETE WORK
4.8.1 4.8.2 4.9
CONCRETE WORK CONCRETE WORK CONCRETE WORK
1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). CEMENT CONCRETE (PRE-CAST) Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc. including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required centering, complete. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand) including the cost of required centering, shuttering complete. 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). Providing and fixing up to floor five level precast cement concrete solid block including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). Providing and fixing up to floor five level precast cement concrete hollow block including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). Precasting and placing in position 125 mm dia Bollards 600 mm high of required shape including providing M.S. Pipe Sleeve 50 mm dia 300 mm long in the Bollard and M.S. Pipes 40 mm dia and 450 mm long with 150x150x6mm M.S. plate welded at bottom and embedded 150mm in cement concrete 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including necessary excavation of size 250x250x450mm deep for the same in bitumen/concrete pavement at specified spacing.
cum cum
cum cum cum
cum
cum cum
cum cum each
4.10 4.11 4.12
CONCRETE WORK
CONCRETE WORK
DAMP- PROOF COURSE Providing and laying damp-proof course 40mm thick with cement sqm concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size). Providing and laying damp-proof course 50mm thick with cement sqm concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). Extra for providing and mixing water proofing material in cement per 50 kg concrete work in doses by weight of cement as per manufacturer's cement specification.
4.13
CONCRETE WORK
Applying a coat of residual petroleum bitumen of grade of VG-10 of of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
sqm
4.14 4.15 4.16 4.17
MISCELLANEOUS Extra for concrete work in superstructure above floor V level for each cum four floors or part thereof. Extra for laying concrete in or under water and/or liquid mud including Cum per cost of pumping or bailing out water and removing slush etc. complete. meter depth Extra for laying concrete in or under foul positions. Cum Making plinth protection 50mm thick of cement concrete 1:3:6 (1 sqm cement :3 coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth Extra for addition of synthetic polyester triangular fibre of length 12 mm, per bag of effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in 50kg of cement concrete / RCC/ Flooring/ Water retaining structure by using cement 125 gms. of synthetic polyester triangular fibre for 50 kgs. Cement used as per directions of Engineer-in-charge. Providing and laying in position ready mixed plain cement concrete, using fly ash and cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, excluding the cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. All works upto plinth level. M-15 grade plain cement concrete (cement content considered @ 240 kg/cum). M-10 grade plain cement concrete (cement content considered @ 220 kg/cum ). All works above plinth and upto floor V level. M-15 grade plain cement concrete. (cement content considered @ 240 kg. /cum). M-10 grade plain cement concrete (cement content considered @ 220 kg/cum). Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, excluding the cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. All works upto plinth level. cum cum
4.18
CONCRETE WORK
4.19
CONCRETE WORK
4.19.1 4.19.1.1 4.19.1.2 4.19.2 4.19.2.1 4.19.2.2 4.2
CONCRETE WORK CONCRETE WORK CONCRETE WORK CONCRETE WORK CONCRETE WORK CONCRETE WORK CONCRETE WORK
cum cum
4.20.1
CONCRETE WORK
4.20.1.1 4.20.1.2 4.20.2 4.20.2.1 4.20.2.2 5 5.1 5.1.1 5.1.2 5.1.3 5.2
CONCRETE WORK CONCRETE WORK CONCRETE WORK CONCRETE WORK CONCRETE WORK REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE
M-15 grade plain cement concrete (cement content considered kg/cum). M-10 grade plain cement concrete (cement content considered kg/cum ). All works above plinth and upto floor V level. M-15 grade plain cement concrete. (cement content considered kg. /cum). M-10 grade plain cement concrete (cement content considered kg/cum).
@ 240 @ 220
cum cum
@ 240 @ 220
cum cum
REINFORCED CEMENT CONCRETE

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size). 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement : 1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). Providing and laying up to floor five level reinforced cement concrete in kerbs, steps and the like excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). Reinforced cement concrete work in arches, archribs, domes, vaults, shells, folded plate and roofs having slope more than 15 up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). Reinforced cement concrete work in chimneys, shafts, up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). Reinforced cement concrete work in well-steining excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE
cum cum cum
5.2.1 5.2.2 5.2.3 5.3
cum cum cum cum
5.4
cum
5.5
cum
5.6
cum
5.7
REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE
cum
5.8
5.9 5.9.1 5.9.2 5.9.3 5.9.4 5.9.5 5.9.6 5.9.7 5.9.8 5.9.9 5.9.10 5.9.11 5.9.12 5.9.13 5.9.14 5.9.15 5.9.16 5.9.16.1 5.9.16.2 5.9.17 5.9.18 5.9.19 5.9.20 5.9.21 5.10 5.10.1
REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE
Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1:3 (1 cement : 1 coarse sand : 3 graded stone aggregate 20mm nominal size). FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete. Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. Suspended floors, roofs, landings, balconies and access platform. Shelves (Cast in situ) Lintels, beams, plinth beams, girders, bressumers and cantilevers. Columns, Pillars, Piers, Abutments, Posts and Struts. Stairs, (excluding landings) except spiral-staircases. Spiral staircases (including landing). Arches, domes, vaults up to 6 m span Extra for arches, domes, vaults exceeding 6 m span Chimneys and shafts Well steining Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards. Extra for shuttering in circular work (20% of respective centering and shuttering items). Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like. Edges of slabs and breaks in floors and walls. Under 20 cm wide Above 20 cm wide Cornices and mouldings Small surfaces such as cantilever ends, brackets and ends of steps, caps and bases to pilasters and columns and the like. Weather shade, Chajjas, corbels etc., including edges. Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12mm thick. Lintels, beams, plinth beams, girders, bressumers and cantilevers. with water proof ply 12mm thick. Providing and fixing tie bolt, spring coil and plastic cone in wall shuttering complete as per the direction of Engineer-in-charge 12 mm dia. & 100 mm length.
cum
sqm sqm sqm sqm sqm sqm sqm sqm sqm sqm sqm sqm sqm sqm sqm
REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE
metre sqm sqm sqm sqm sqm sqm
each set
5.10.2 5.10.3 5.10.4 5.11
12 mm dia. & 150 mm length. 20 mm dia. & 150 mm length. 20 mm dia.& 225 mm length. Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured) Suspended floors, roofs, landing, beams and balconies (Plan area to be measured). PRE CAST R.C.C. Providing, hoisting and fixing up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like including the cost of required centering, shuttering but excluding cost of reinforcement, with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size). Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in small lintels not exceeding 1.5m clear span up to floor five level including the cost of required centering, shuttering but excluding the cost of reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in mouldings as in cornices, windows sills etc. including setting in cement mortar 1:3 (1 cement : 3 coarse sand) cost of required centering, shuttering but excluding the cost of reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in lintels, beams and bressumers including setting in cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering and shuttering but excluding the cost of reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in shelves including setting in cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but excluding the cost of reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size). Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in vertical & horizontal fins individually or forming box louvers setting in cement mortar 1:2 (1 cement : 2 coarse sand) including the cost of required centering, shuttering but excluding the cost of reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete excluding plastering of the jambs, sills and soffits. 50 mm thick
each set each set each set
5.11.1
REINFORCED CEMENT CONCRETE REINFORCED CEMENT REINFORCED CONCRETE CEMENT CONCRETE
sqm
5.12
cum
5.13
cum
5.14
cum
5.15
cum
5.16
cum
5.17
cum
5.18
5.18.1
sqm
5.18.2 5.18.3
5.19
40 mm thick 25 mm thick ENCASING ROLLED STEEL SECTION Encasing rolled steel sections, in beams and columns, with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 12.5mm nominal size) including centering and shuttering complete but excluding cost of reinforcement. Encasing rolled steel section in grillages with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 12.5mm nominal size) including centering and shuttering but excluding cost of expanded metal and hangers. Extra for providing and fixing expanded metal mesh of size 20x60mm and strands 3.25mm wide 1.6mm thick weighing 3.64 kg. per sqm. for encasing of rolled steel sections in beams, columns and grillages excluding cost of hangers. STEEL REINFORCEMENT Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars. Hard drawn steel wire Cold twisted bars Hot rolled deformed bars Hard drawn steel wire fabric Thermo-Mechanically Treated bars. Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Mild steel and Medium Tensile steel bars. Hard drawn steel wire Cold twisted bars Hot rolled deformed bars Hard drawn steel wire fabric Thermo-Mechanically Treated bars. MISCELLANEOUS Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand) Extra for rendering smooth the top of suspended floors, landings and staircases (treads and risers) with cement mortar 1:2 (1 cement : 2 coarse sand) including a floating coat of neat cement and protecting the surface with a layer of 7.5 cm of earth laid over 15 mm of fine sand in case of suspended floor and bricks laid in mud mortar in case of landings and steps including subsequent removal and cleaning of the same.
sqm sqm
cum
5.20
cum
5.21
sqm
5.22 5.22.1 5.22.2 5.22.3 5.22.4 5.22.5 5.22.6 5.22A 5.22A.1 5.22A.2 5.22A.3 5.22A.4 5.22A.5 5.22A.6 5.23 5.24
REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE
kilogram kilogram kilogram kilogram kilogram kilogram
REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT REINFORCED CONCRETE CEMENT CONCRETE REINFORCED CEMENT CONCRETE
kilogram kilogram kilogram kilogram kilogram kilogram sqm sqm
5.25 5.26
REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE
Providing and fixing in position copper plate as per design for expansion joints. Providing and filling in position, blown bitumen in expansion joints.
kilogram
5.27
5.28 5.29 5.29.1 5.29.1.1 5.29.1.2 5.29.2 5.29.2.1 5.29.2.2 5.30 5.31
REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE
per cm depth per cm width per 100m Providing and filling in position bitumen mix filler of Proportion 80 kg. of per cm hot bitumen, 1 kg. of cement and 0.25 cubicmetre of coarse sand for depth per expansion joints. cm width per 100m Providing and fixing in position 12mm thick bitumen impregnated fibre per cm board conforming to IS: 1838 including cost of primer, sealing depth per compound in expansion joints. per 100m Providing and fixing sheet covering over expansion joints with iron screws as per design to match the colour / shade of wall treatment. Non-asbestos fibre cement board 6 mm thick as per IS: 14862. 150mm wide. 200mm wide. Aluminium fluted strips 3.15mm thick. 150 mm wide. 200 mm wide. Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. Extra for laying reinforced cement concrete in or under water and/ or liquid mud including cost of pumping or bailing out water and removing slush etc., complete. Note For Item No. 5.31:- The quantity will be calculated by multiplying the depth measured from the subsoil water level up to the centre of gravity of the R.C.C. under subsoil water with the quantity of R.C.C. in cubic metre executed under subsoil water. The depth of centre of gravity shall be reckoned correct to 0.1m, 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. No extra payment shall be made for placing reinforcement or centering & shuttering under sub soil water conditions. Extra for laying reinforced cement concrete in or under foul positions. DESIGN MIX CONCRETE Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately). All works upto plinth level. metre metre metre cum metre metre
5.32
5.33
REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE
cum
5.33.1
cum
5.33.2 5.34
REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE
All works above plinth level upto floor V level. Extra for providing richer mixes at all floor levels. Note:- Excess/less cement over the specified cement content used is payable /recoverable separately. Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum). Providing M-35 grade concrete instead of M-25 grade BMC/RMC. (Note : Cement content considered in M-35 is @ 350 kg/cum). Providing M-40 grade concrete instead of M-25 grade BMC/RMC. (Note : Cement content considered in M-40 is @ 360 kg/cum). Add for using extra cement in the items of design mix over and above the specified cement content therein. In foundation In superstructure Providing and placing in position precast reinforced cement concrete waffle units square or rectangular as per design and shape for floors and roofs in 1:1:3 (1 Cement : 1 coarse sand : 3 graded stone aggregate 10mm nominal size) including flush or deep ruled pointing at joints in Cement mortar 1:2 (1 Cement : 2 Fine sand), making necessary holes of required sizes for carrying through service lines etc., providing steel hooks for lifting etc, form work in precasting, handling, hoisting, centering and erection complete for all floor levels but excluding the cost of reinforcement. Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately). All works upto plinth level. All works above plinth level upto floor V level. Providing and laying in position ready mixed concrete manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead up to 10kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. M-25 grade Reinforced cement concrete by using 380 kg. of cement per cum of concrete. All works above plinth level up to floor V elevl.
cum
5.34.1 5.34.2 5.34.3 5.35 5.35.1 5.35.2 5.36
cum cum cum
quintal quintal
cum
5.37
5.37.1 5.37.2 5.37.A
cum cum cum
5.38 5.39
Extra for R.C.C./ B.M.C/ R.M.C. work above floor V level for each four floors or part thereof. Extra for carriage of R.M.C. beyond the initial lead of 10km. Note:- Flyash conforming to grade I of IS: 3812 (Part I) may be used as part replacement of OPC provided uniform blending with cement is ensured in accordance with clauses 5.2 and 5.2.1 of 15:456:- 2000 in the items of BMC and RMC. Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using fly ash and cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate / retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in charge. NOTE- 1) Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately. 2) Fly ash conforming to grade I of IS 3812 (Part-1) only be used as part replacement of OPC as per IS 456. Uniform blending with cement to be ensured in accordance with clauses 5.2 and 5.2.1 of IS:456 -2000 in the items of BMC and RMC. 3) The above item shall be used judiciously where specified quality of Fly Ash is available for mixing in concrete. Also, the guidelines issued by CDO, CPWD, vide circular no. CDO/SE(RR)/Fly Ash (Main)/102 dated 9th April 2009 shall be followed in such cases. All works up to Plinth level. All works above plinth & up to floor V level. Supplying and applying pre tested and approved water based concrete curing compound to concrete/ masonry surface, all as per manufacturers specification and direction of Engineer-in-charge. Non pigmented wet curing compound Pigmented wet curing compound. Providing and fixing tapered / parallel threaded couplers conforming to IS code on "Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement Specification", to reinforcement bars including threading, enlargement at connection by forging, protecting the prepared reinforcement bars and related operations as required to complete the works per direction of Engineer-in-Charge . (The length of the bars in which coupler is to be provided should not be less than 4 metre, no deduction for labour and binding wire saved for not providing lap length shall be made). Coupler for 16 mm diameter reinforcement bar. Coupler for 20 mm diameter reinforcement bar. Coupler for 25 mm diameter reinforcement bar. Coupler for 28 mm diameter reinforcement bar.
cum cum/ km
5.40
5.40.1 5.40.2 5.41 5.41.1 5.41.2 5.42
5.42.1 5.42.2 5.42.3 5.42.4
5.42.5 5.43 5.43.1 5.43.2 6 6.1 6.1.1 6.1.2 6.2 6.2.1 6.2.2 6.3
REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE REINFORCED CEMENT CONCRETE BRICK WORK BRICK WORK
Coupler for 32 mm diameter reinforcement bar. Providing and fixing in position Stainless steel Grade 304 plate-1.0 mm thick as per design for expansion joints. 200 mm wide. 300 mm wide.
BRICK WORK
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) Cement mortar 1:6 (1 cement : 6 coarse sand) Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) Cement Mortar 1:6 (1 cement : 6 coarse sand). Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 -1991 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) : With F.P.S.(non modular) bricks. With Modular bricks. Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) Cement mortar 1:6 (1 cement : 6 coarse sand) Extra for brick work / AAC block masonry / Tile brick masonry in superstructure above floor V level for each four floors or part thereof by mechanical means. Extra for forming cavity 5cm to 7.5cm wide in cavity walls with necessary weep and vent holes including use of cores and cost of providing and fixing bitumastic coated M .S. ties 300mm long of 25x3mm section at not less than 3 ties per sqm as per approved design. Providing half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:3 (1 Cement : 3 coarse sand) in superstructure for closing cavity 5 to 7.5 cm wide in cavity wall complete with 10 cm / 11.4 cm wide bitumen felt type 3 grade 1. Brick work 7 cm thick with common burnt clay F.P.S. (non modular) brick of class designation 7.5 in cement mortar 1:3 (1 cement : 3 coarse sand) in superstructure above plinth level and upto floor five level. Brick work in plain arches in superstructure above plinth level and upto floor five level including centering and shuttering complete for span up to 6 metres with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:3 (1 cement : 3 coarse sand). Brick work in gauged arches in superstructure above plinth level and upto floor five level in cement mortar 1:3 (1 cement : 3 coarse sand) including centering and shuttering complete, for span up to 6 meters with common burnt clay F.P.S. (non modular) bricks of class designation 7.5. cum cum
BRICK WORK BRICK WORK BRICK WORK
cum cum
6.3.1 6.3.2 6.4 6.4.1 6.4.2 6.5 6.6
cum cum
cum cum cum sqm
BRICK WORK
6.7
BRICK WORK
metre
6.8
BRICK WORK
sqm
6.9
BRICK WORK
cum
6.10
BRICK WORK
cum
6.11
BRICK WORK
BRICK WORK
6.12 6.12.1 6.12.2 6.13 6.13.1 6.13.2 6.14 6.15
BRICK WORK
BRICK WORK
BRICK WORK
6.16 6.16.1 6.16.2 6.17
BRICK WORK
Extra for additional cost of centering for arches exceeding 6m span including all shuttering, bolting, wedging and removal (Area of the soffit to be measured). HALF BRICK MASONRY Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in. Cement mortar 1:3 (1 cement : 3 coarse sand) cement mortar 1:4 (1 cement : 4 coarse sand) Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:3 (1 cement :3 coarse sand) Cement mortar 1:4 (1 cement :4 coarse sand) Extra for half brick masonry in superstructure, above floor V level for every four floors or part thereof by mechanical means. Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry. BRICK TILE WORK Tile brick masonry with common burnt clay F.P.S. (non modular) tile bricks of class designation 10 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) Cement mortar 1:6 (1 cement : 6 coarse sand). Tile brick masonry with common burnt clay machine moulded tile bricks of class designation 12.5 conforming to IS : 2690 (Part I) - 1993 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand). Tile brick masonry with common burnt clay F.P.S. (non modular) tile bricks of class designation 10 in superstructure above plinth level up to floor V level in cement mortar 1:6 (1 cement : 6 coarse sand). Deleted. Tile brick masonry with common burnt clay F.P.S. (non modular) tile bricks of class designation 10 in plain arch work in superstructure above plinth and upto floor five level in cement mortar 1:4 (1 cement : 4 coarse sand) including centering and shuttering complete. Tile brick masonry with common burnt clay F.P.S. (non modular) tile bricks of class designation 10 in gauged arch work in superstructure above plinth and upto floor five level in cement mortar 1:4 (1 cement : 4 coarse sand) including centering and shuttering complete. Tile brick masonry work 5 cm thick with common burnt clay F.P.S. (non modular) tile bricks of class designation 10 in cement mortar 1:3 (1 cement : 3 coarse sand) in superstructure above plinth and upto floor five level. HONEY COMB WORK Honey-comb brick work 10/11.4 cm thick with common burnt clay bricks of class designation 7.5 in super structure above plinth level upto floor V level with cement mortar 1:4 (1 cement : 4 coarse sand). Extra for laying brick work in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete. NOTE :- The quantity will be calculated by multiplying the depth measured from sub - soil water level up to the centre to gravity of brick work under sub - water with the quantity of brick work in cum executed under the sub - soil water. The depth of centre of gravity shall be reckoned correct to 0.1m, 0.05m or more shall be taken as 0.1 m and less than 0.05m ignored.
sqm
sqm sqm
sqm sqm sqm sqm
cum cum cum
6.18 6.19 6.20
BRICK WORK
cum
BRICK WORK BRICK WORK
cum
6.21
BRICK WORK
cum
6.22
BRICK WORK
sqm
BRICK WORK
6.23 6.24
BRICK WORK
sqm cum
BRICK WORK
BRICK WORK
6.25 6.26
6.26.1 6.26.2 6.27
6.27 6.27 6.28
6.28.1 6.28.2 6.29
6.29.1 6.29.2 6.30
6.30.1 6.30.2 6.31
6.31.1 6.31.2 6.32 6.32.1 6.32.2 6.33 6.34
BRICK WORK BRICK WORK BRICK WORK BRICK WORK
6.34.1 6.34.2 6.35
Extra for laying brick work in or under foul position. EXPOSED BRICK WORK Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand) From ground level upto plinth level. Above plinth level upto floor V level. Brick work with common burnt clay modular bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand). From ground level upto plinth level. Above plinth level upto floor V level. Brick work with machine moulded modular bricks of class designation 125 in exposed brick work including making horizontal and vertical grooves 10mm wide 12mm deep complete from ground level up to plinth level in cement mortar 1:6 (1 cement : 6 coarse sand). From ground level upto plinth level. Above plinth level upto floor V level. Brick work with common burnt clay machine moulded F.P.S. (non modular) bricks of class designation 12.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand). From ground level upto plinth level. Above plinth level upto floor V level. Brick work with common burnt clay machine moulded perforated F.P.S. (non modular) bricks of class designation 12.5 conforming IS : 22221991 in exposed brick work including making horizontal and vertical grooves 10mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand). From ground level upto plinth level. Above plinth level upto floor V level. Brick work with common burnt clay machine moulded perforated modular bricks of class designation 12.5 conforming to IS : 2222 -1991 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand). From ground level upto plinth level. Above plinth level upto floor V level. Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in : Cement mortar 1:4 (1 cement : 4 coarse sand) Cement mortar 1:6 (1 cement : 6 coarse sand) Deleted. Brick work with non modular fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : Cement mortar 1:4 (1 cement : 4 coarse sand) Cement mortar 1:6 (1 cement : 6 Coarse sand) Brick work with modular calcium silicate bricks machine moulded conforming to IS:4139, class designation 10 average compressive strength in super structure above plinth level up to floor V level in :
cum
cum cum
cum cum
cum cum
cum cum
cum cum
cum cum
cum cum
cum cum
6.35.1 6.35.2 6.36 6.36.1 6.37 6.38
BRICK WORK
6.39 6.40
6.41 6.42 6.42.1 6.42.2 6.43 6.44 6.45 6.45.1 6.45.2 6.46 6.46.1 6.46.2 7 7.1
BRICK WORK
BRICK WORK
BRICK WORK BRICK WORK BRICK WORK BRICK WORK
BRICK WORK
BRICK WORK BRICK WORK STONE WORK STONE WORK
7.1.1 7.2
STONE WORK STONE WORK
Cement mortar 1:4 (1 cement : 4 coarse sand) Cement mortar 1:6 (1 cement : 6 Coarse sand) Brick work with modular extruded brunt fly ash clay sewer bricks (Conforming to IS: 4885 - 1988) in foundation and plinth : Cement Mortar 1:4 ( 1 cement : 4 coarse sand) Brick work with modular extruded brunt fly ash clay sewer bricks (conforming to IS : 4885) in arches in foundation and plinth in cement mortar 1:3 ( 1 cement : 3 fine sand). Providing and laying autoclaved aerated cement blocks masonry with 100mm thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ) The rate includes providing and placing in position 2 Nos. 6 mm dia M.S. bars at every third course of masonry work. Deleted. Providing and laying Gypsum panel partitions 100mm thick with water proof Gypsum panels of size 666x500x100mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturers specifications in superstructure above plinth level up to floor V level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2 Extra for Gypsum panel Partitions in superstructure above floor V level for every four floors or part thereof. Brick work with mechanized autoclaved flyash sand lime non modular bricks conforming to IS: 12894 of class designation 10 in superstructure above plinth level up to floor V level in. Cement mortar 1:4 (1 cement :4 coarse sand) Cement mortar 1:6 (1 cement :6 coarse sand). Deleted. Brick edging 7cm wide 11.4cm. deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand). Half brick masonry with non modular fly ash lime Gypsum bricks (FALG bricks) class designation 10, conforming to IS : 12894, in super structure above plinth and upto floor V level. Cement mortar 1 : 3 (1 cement : 3 coarse sand) Cement mortar 1 : 4 (1 cement : 4 coarse sand) Half brick masonry with non modular mechanised auto claved fly ash sand lime bricks class designation 10, conforming to IS : 12894, in super structure above plinth and upt floor V level. Cement mortar 1 : 3 (1 cement : 3 coarse sand) Cement mortar 1 : 4 (1 cement : 4 coarse sand) RANDOM RUBBLE MASONRY Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at window sills, ceiling level and the like. Cement mortar 1:6 (1 cement : 6 coarse sand). Deleted. Extra for random rubble masonry with hard stone in :
cum cum
cum cum cum
sqm
sqm
cum cum metre
sqm sqm
sqm sqm
cum
7.2.1 7.3 7.4
STONE WORK STONE WORK STONE WORK
cum
7.4.1 7.4.2 7.5
STONE WORK
7.6 7.6.1 7.7 7.7.1 7.8 7.8.1 7.8.2 7.9 7.10 7.10.1 7.10.2 7.11
STONE WORK
STONE WORK
STONE WORK
STONE WORK
7.12
STONE WORK
7.12.1 7.12.1.1 7.12.1.2 7.12.2 7.12.2.1 7.12.2.2 7.13
STONE WORK STONE WORK STONE WORK STONE WORK STONE WORK STONE WORK STONE WORK
7.13.1 7.13.1.1 7.13.1.2 7.13.2 7.13.2.1 7.13.2.2 7.14
Square or rectangular pillars Circular pillars. Extra for random rubble masonry with hard stone curved on plan for a mean radius not exceeding 6 m. COURSED RUBBLE MASONRY Coursed rubble masonry (first sort) with hard stone in foundation and plinth with : Cement mortar 1:6 (1 cement : 6 coarse sand) Coursed rubble masonry (second sort) with hard stone in foundation & plinth with : Cement mortar 1:6 (1 cement : 6 coarse sand) Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor five level. Masonry work (first sort) , in cement mortar 1:6 (1 cement : 6 coarse sand) Masonry work (second sort) , in cement mortar 1:6 (1 cement : 6 coarse sand) Deleted. Extra for coursed rubble masonry with hard stone (first or second sort) in : Square or rectangular pillars Circular pillars. Extra for coursed rubble masonry with hard stone (first or second sort) curved on plan for a mean radius not exceeding 6 m. ASHLAR MASONRY Stone work in plain ashlar in super structure upto floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : One face dressed. Red sand stone White sand stone Both face dressed. Red sand stone. White sand stone Stone work plain ashlar in arches in super structure upto floor V level in cement mortar 1:3 (1 cement : 3 coarse sand) including centring, shuttering and pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade. One face dressed. Red sand stone White sand stone Both face dressed. Red sand stone. White sand stone Stone work plain ashlar in domes , in super structure upto floor V level in cement mortar 1:3 (1 cement : 3 coarse sand) including centring, shuttering and pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade. One face dressed. Red sand stone White sand stone Both face dressed.
cum cum cum
cum
cum
cum cum
cum cum cum
cum cum cum cum
cum cum cum cum
7.14.1 7.14.1.1 7.14.1.2 7.14.2
STONE WORK STONE WORK STONE WORK STONE WORK
cum cum
7.14.2.1 7.14.2.2 7.15
7.15.1 7.15.1.1 7.15.1.2 7.15.2 7.15.2.1 7.15.2.2 7.16 7.17 7.17.1 7.18 7.19
Red sand stone. White sand stone Stone work ashlar punched (ordinary) in superstructure upto floor five level in cement mortar 1:6 (1 white cement : 6 coarse sand) including pointing with cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade. One face dressed. Red sand stone White sand stone Both face dressed. Red sand stone. White sand stone Extra for stone work, random rubble / coursed rubble masonry / ashlar masonry above floor V level for every four floors or part thereof.
cum cum
cum cum cum cum cum
STONE WORK
STONE WORK
7.20
STONE WORK
7.20.1 7.20.2 7.21 7.21.1 7.21.2 7.22
STONE WORK
7.23
STONE WORK
Extra for plain ashlar or ashlar punched in : Square or rectangular pillars cum Extra for stone work; plain ashlar or ashlar punched curved on plan with cum a mean radius not exceeding 6 m. Extra for additional cost of centering for arches exceeding 6m span sqm including all strutting, bolting, wedging etc. and removal (area of soffit to be measured). SUNK, MOULDED, CARVED ASHLAR MASONRY Stone work ashlar sunk or moulded or sunk and moulded upto floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : Red sand stone cum White sand stone cum Extra for stone work sunk or moulded or sunk and moulded or carved in : Triangular or Square or rectangular pillars cum Circular or polygonal pillars cum Extra for stone work sunk or moulded in cornices. per metre per cm girth MISCELLANEOUS STONE WORK Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : Red sand stone - exposed face fine dressed with rough backing. 70 mm thick. 60 mm thick. 50 mm thick. 40 mm thick. 30 mm thick. Red sand stone - Exposed face machine cut and table rubbed with rough backing. 70 mm thick sqm sqm sqm sqm sqm
7.23.1 7.23.1.1 7.23.1.2 7.23.1.3 7.23.1.4 7.23.1.5 7.23.2 7.23.2.1
STONE WORK STONE WORK STONE WORK STONE WORK STONE WORK STONE WORK STONE WORK STONE WORK
STONE WORK
sqm
7.23.2.2 7.23.2.3 7.23.2.4 7.23.2.5 7.23.3 7.23.3.1 7.23.3.2 7.23.3.3 7.23.3.4 7.23.3.5 7.23.4 7.23.4.1 7.23.4.2 7.23.4.3 7.23.4.4 7.23.4.5 7.24 7.25
STONE WORK STONE WORK STONE WORK STONE WORK STONE WORK STONE WORK STONE WORK STONE WORK STONE WORK STONE WORK STONE WORK
STONE WORK STONE WORK STONE WORK STONE WORK STONE WORK STONE WORK
STONE WORK
7.26 7.27 7.28
STONE WORK
STONE WORK
STONE WORK
60 mm thick 50 mm thick 40 mm thick 30 mm thick White sand stone - exposed face fine dressed with rough backing . 70 mm thick. 60 mm thick. 50 mm thick. 40 mm thick. 30 mm thick. White sand stone - Exposed face machine cut and table rubbed with rough backing. 70 mm thick. 60 mm thick. 50 mm thick. 40 mm thick. 30 mm thick. Extra for stone work (veneer work) curved on plan with a mean radius not exceeding 6 m. Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand) including making the necessary chases in stone and holes in walls wherever required. Providing and fixing stone dowels 10x5x2.50 cm cut to double wedge shape as per design in cement mortar 1:2 (1 cement : 2 coarse sand) including making the necessary chases. Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand) including making the necessary chases. Providing and fixing sloping chajja of stone 40 mm thick and upto 80 cm wide beyond the wall as measured along the slope in cement mortar 1:4 (1 cement : 4 coarse sand) with 12mm diameter anchoring steel bar 45 cm long fixed in each stone and supported on and including with bricks cove in cement mortar 1:4 (1 cement : 4 coarse sand) including pointing in cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade: Red sand stone: With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 White sand stone: With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 Providing and fixing horizontal chajja of stone 40 mm thick and upto 80 cm projection in cement mortar 1:4 (1 cement : 4 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade: : Red sand stone White sand stone 30mm red sand stone sun-shade (chisel-dressed) supported on red sand stone brackets, fixed in walls with cement mortar 1:4 (1 cement : 4 coarse sand) including finishing complete.
sqm sqm sqm sqm sqm sqm sqm sqm sqm
sqm sqm sqm sqm sqm cum kilogram
each each
7.28.1 7.28.1.1 7.28.2 7.28.2.1 7.29
sqm
sqm
STONE WORK
7.29.1 7.29.2 7.30
sqm sqm sqm
7.31
STONE WORK
7.32
STONE WORK
Providing and fixing red sand stone brackets 55x22.5x45cm sunk and moulded including providing and fixing with 4 Nos. gun metal cramp 25x6mm 30 cm long and dowel bars 7.5 cm long 6 mm dia as per design. Stone work, plain in copings, cornices, string courses and plinth courses, upto 75 mm thick in Cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade. Red sand stone White sand stone Providing and fixing stone jali 40mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc.
each
7.32.1 7.32.2 7.33
cum cum
7.33.1 7.33.2 7.34 7.34
Red sand stone sqm White sand stone sqm Extra for laying stone work in or under water and/or liquid mud including cum/ mtr cost of pumping or bailing out water and removing slush etc. complete. depth NOTE :- The quantity will be calculated by multiplying the depth measured from sub - soil water level up to the centre to gravity of brick work under sub - water with the quantity of brick work in cum executed under the sub - soil water. The depth of centre of gravity shall be reckoned correct to 0.1m. 0.05m or more shall be taken as 0.1 m and less than 0.05m ignored. Extra for laying stone work in or under foul position. Wall lining butch work upto 10m height with Dholpur stone 40 mm thick rough facing on the exposed surface with stone strips of minimum length 300 mm and required width including embedding every tenth layer and bottom most layer in masonry or concrete after making necessary chases of size 75x75mm and by providing layer of 75mm thick strips i/c 12mm thick bed of cement mortar 1:3 (1 Cement : 3 coarse sand) i/c ruled pointing in cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment to match the shade of stone complete as per direction of Engineer-in-charge. Stone work ( machine cut edges) for wall lining upto 10 m height etc. (Veneer work) backing filled with a grout of 12mm thick cement mortar 1:3 (1 Cement : 3 coarse sand) and jointed with Cement mortar 1:2 (1 cement : 2 stone dust) including rubbing and polishing complete. (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) Kota stone slabs exposed face dressed and rubbed. 25 mm thick. Stone tile work for wall lining upto 10 m height with special adhesive over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement with an admixture of pigment to match the stone shade. 8mm thick (mirror polished and machine cut edge) Granite stone of any colour and shade. Raj Nagar plain white marble/ Udaipur green marble/ Zebra black marble. Extra for stone work for wall lining on exterior walls of height more than 10 m from ground level for every additional height of 3 m or part there of.
STONE WORK
7.35 7.36
cum sqm
7.37
STONE WORK
7.37.1 7.37.1.1 7.38
sqm
7.38.1 7.38.1.1 7.38.1.2 7.39
sqm sqm sqm
STONE WORK
STONE WORK
7.4
STONE WORK
STONE WORK IN DRY CLADDING Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately.) Red sand stone. White sand stone Providing and fixing structural steel frame (for dry cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/ rectangular tube in the required pattern as per architectural drawing including cost of cutting, bending, welding etc. The frame work shall be fixed to the wall with the help of MS brackets/ lugs of angle iron/ flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of size 300x230x300mm including cost of necessary centring and shuttering and with approved expansion hold fasteners on CC/RCC surface, including drilling necessary holes. Approved cramps/ pins etc. shall be welded to the frame work to support stone cladding, sqm sqm
7.40.1 7.40.2 7.41
7.41.1
STONE WORK
the steel work will be given a priming coat of Zinc primer as approved kilogram by Engineer-in-charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution). The frame work shall be fixed in true horizontal & vertical lines/planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel cramps shall be paid for separately and nothing extra shall be paid.) Providing and fixing adjustable stainless steel cramps of approved quality and of required shape and size adjustable with stainless steel nuts, bolts and washer (total weight not less than 260 gms) for dry stone cladding fixed on frame work at suitable location including making necessary recesses in stone slab, drilling required holes etc complete as per direction of the Engineer-in-charge. each
7.42
STONE WORK
8 8.1
MARBLE WORK MARBLE WORK
MARBLE WORK
Marble work gang saw cut (polished and machine cut) of thickness 18mm for wall lining (veneer work) in cement mortar 1:3 (1 cement : 3 coarse sand) including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the backing by means of cramps, which shall be paid for separately). Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble. Area of slab upto 0.50 sqm Area of slab over 0.50 sqm Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels.
8.1.1 8.1.1.1 8.1.1.2 8.2
MARBLE WORK
MARBLE WORK MARBLE WORK MARBLE WORK
sqm sqm
8.2.1 8.2.1.1 8.2.1.2 8.2.2 8.2.2.1 8.2.2.2 8.3 8.3.1 8.3.2 8.4 8.5
MARBLE WORK
MARBLE WORK MARBLE WORK MARBLE WORK MARBLE WORK MARBLE WORK MARBLE WORK
MARBLE WORK
8.6 8.7
MARBLE WORK
MARBLE WORK
8.7.1 8.7.2 8.8 8.8.1 8.8.1.1 8.8.1.2 8.8.1.3 8.9 8.9.1 8.9.1.1 8.9.1.2 8.10
MARBLE WORK MARBLE WORK MARBLE WORK MARBLE WORK MARBLE WORK
8.10.1 8.10.2 9 9.1
MARBLE WORK MARBLE WORK WOOD WORK WOOD WORK
Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble. Area of slab upto 0.50 sqm. Area of slab over 0.50 sqm. Granite of any colour and shade Area of slab upto 0.50 sqm Area of slab over 0.50 sqm. Providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Marble work Granite work. Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete. Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete. Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. Providing and fixing cramps of required size & shape in RCC/ CC backing with cement mortar 1:2 ( 1 cement :2 coarse sand) including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately). Gunmetal cramps. Stainless steel cramps. Providing and fixing expansion hold fasteners on C.C. /R.C.C. surface backing including drilling necessary holes and the cost of bolt etc complete. Wedge expansion type Fastener with threaded dia 6 mm. Fastener with threaded dia 10 mm. Fastener with threaded dia 12 mm. Stone tile (polished) work for wall lining over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete. 8mm thick. Raj nagar plain white marble/ Udaipur green marble/ Zebra black marble. Granite of any colour and shade. Providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50 cm deep and 1.8 cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. White Agaria Marble Stone. Granite Stone of approved shade.
sqm sqm sqm sqm
metre metre metre each
sqm
kg kg
each each each
sqm sqm
sqm sqm
WOOD AND P. V. C. WORK

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).
9.1.1 9.1.2 9.1.3 9.2
WOOD WORK WOOD WORK WOOD WORK WOOD WORK
9.3 9.3.1 9.3.2 9.4 9.4.1 9.4.2 9.4.3 9.5
WOOD WORK
WOOD WORK WOOD WORK WOOD WORK
9.5.1 9.5.1.1 9.5.1.2 9.5.2 9.5.2.1 9.5.2.2 9.5.3 9.5.3.1 9.5.3.2 9.6
WOOD WORK WOOD WORK WOOD WORK WOOD WORK WOOD WORK WOOD WORK WOOD WORK WOOD WORK WOOD WORK WOOD WORK
9.6.1
WOOD WORK
9.6.2
WOOD WORK
Second class teak wood Sal wood Kiln seasoned and chemically treated Hollock wood. Providing laminated veneer lumber conforming to IS:14616 and TAD -15: 2001( Part B) in factory made frames of doors, windows, clerestory windows and other frames, wrought framed and fixing in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Providing wood work in frames of false ceiling, partitions etc. sawn and put up in position : Sal wood Kiln seasoned and chemically treated Hollock wood. Extra for additional labour for circular works, such as in frames of fan light : Second class teak wood Sal wood Kiln seasoned and chemically treated Hollock wood. Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excluding, panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Second class teak wood 35 mm thick shutters 30 mm thick shutters Kiln seasoned and chemically treated Hollock wood. 35 mm thick shutters 30 mm thick shutters Kiln seasoned selected planks of sheesham wood 35 mm thick shutters 30 mm thick shutters Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B) including ISI marked black enameled M.S. butt hinges with necessary screws as per directions of Engineer-in-charge and panelling with panels of: 12mm thick plain grade - 1, medium density flat pressed three layer particle board FPT - I or graded wood particle board FPT - I IS : 3087 marked bonded with BWP type synthetic resin adhesive as per IS : 848 : 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade - 1, medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT - I, conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and pre-laminated conforming to IS : 12823 Grade 1, Type - II marked: 12 mm thick one side Pre-laminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT-1 conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and pre-laminated conforming to IS : 12823 Grade -1, Type II marked:
cum cum cum cum
cum cum
cum cum cum
sqm sqm sqm sqm sqm sqm
sqm
sqm
9.6.3
WOOD WORK
sqm
9.7
WOOD WORK
9.7.1 9.7.2 9.7.3 9.7.3.1 9.7.3.2 9.7.4 9.7.4.1 9.7.5 9.7.5.1 9.7.5.2 9.7.5.3 9.7.5.4 9.7.6 9.7.6.1 9.7.7 9.7.7.1 9.7.7.2 9.7.8 9.9 9.9.1 9.9.1.1 9.9.1.2 9.9.2 9.9.2.1 9.9.2.2 9.9.3 9.9.3.1 9.9.3.2 9.10
WOOD WORK
WOOD WORK WOOD WORK
WOOD WORK WOOD WORK
WOOD WORK
WOOD WORK
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Second class teak wood Kiln seasoned and chemically treated Hollock wood Ply wood 5 ply, 9 mm thick : Decorative plywood both side decorative veneer (Type - I) conforming to IS 1328 BWR type. Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type Ply wood 7 ply, 9 mm thick : Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type Particle Board 12 mm thick Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked. Veneered flat pressed three layer or graded wood particle board with commercial veneering on both sides conforming to IS:3097, grade I. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side, Grade I, Type II IS: 12823 marked. Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS:12823 marked. Coir Veneer Board (conforming to IS 14842) 12 mm thick Float glass panes 4 mm thick glass pane 5.5 mm thick glass panes Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. Wire and 1.4 mm wide aperture with matching wood beading Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including black enamelled ISI marked M.S butt hinges with necessary screws. Second class teak wood 35 mm thick 30 mm thick Kiln seasoned and chemically treated Hollock wood 35 mm thick 30 mm thick Kiln seasoned selected planks of sheesham wood. 35 mm thick 30 mm thick Providing and fixing factory made laminated veneer lumber glazed shutter conforming to IS: 14616 and TADS 15:2001 (Part B) , using 4mm thick float glass panes for doors, windows and clerestory windows including ISI marked black enamelled M.S butt hinges with necessary screws as per directions of Engineer-in-charge 30 mm thick shutters Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured)
sqm sqm sqm sqm
sqm
sqm sqm sqm sqm
WOOD WORK
WOOD WORK WOOD WORK WOOD WORK WOOD WORK WOOD WORK WOOD WORK
sqm sqm sqm sqm
WOOD WORK
WOOD WORK WOOD WORK WOOD WORK WOOD WORK WOOD WORK WOOD WORK WOOD WORK WOOD WORK WOOD WORK WOOD WORK
9.10.1 9.11
WOOD WORK WOOD WORK
sqm
9.11.1 9.12
WOOD WORK WOOD WORK
9.13
WOOD WORK
9.14 9.15 9.15.1 9.15.1.1 9.15.2 9.15.2.1 9.16 9.16.1 9.16.1.1 9.16.1.2 9.16.2 9.16.2.1 9.16.2.2 9.17
WOOD WORK
WOOD WORK
WOOD WORK WOOD WORK WOOD WORK WOOD WORK WOOD WORK WOOD WORK WOOD WORK
WOOD WORK
WOOD WORK WOOD WORK
WOOD WORK
WOOD WORK
9.17.1 9.17.2 9.18
9.18.1 9.18.2 9.19 9.20
WOOD WORK WOOD WORK WOOD WORK WOOD WORK WOOD WORK
5.5 mm thick instead of 4 mm thick. Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). Deduct for providing pin headed glass panes instead of ordinary float glass panes weighing 4 mm thick in doors, windows and clerestory windows, shutters (Area of opening for glass panes excluding portion inside rebate shall be measured). Extra for providing ISI marked Stainless Steel butt hinges instead of black enamelled M.S. butt hinges with necessary screws. (Shutter area to be measured). Deduct for not providing hinges in doors, windows or clerestory window shutters with : Stainless steel butt hinges with stainless steel screws : For 2nd class teak wood and other inferior class of wood shutters. ISI marked M.S. pressed butt hinges bright finished of required size For 2nd class teak wood and other inferior class of wood shutters. Providing and fixing 25 mm thick shutters for cup board etc. : Panelled or panelled & glazed shutters : Second class teak wood including ISI marked anodised aluminium butt hinges with necessary screws. Second class teak wood including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. Glazed shutters : Second class teak wood including ISI marked anodized aluminium butt hinges with necessary screws. Second class teak wood including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : 12 mm thick 18 mm thick Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). 18 mm thick 25 mm thick
sqm sqm
sqm
sqm
sqm sqm
sqm sqm
sqm sqm
sqm sqm
sqm sqm Deleted
9.20.1 9.20.2
WOOD WORK
WOOD WORK
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
sqm sqm
9.20.3 9.21
WOOD WORK
WOOD WORK
9.21.1 9.21.2 9.21.3 9.22 9.22.1 9.23 9.24 9.24.1 9.24.2
WOOD WORK
WOOD WORK
WOOD WORK
WOOD WORK
WOOD WORK WOOD WORK
WOOD WORK
WOOD WORK WOOD WORK
25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws. Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) On one side only. Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) : Rectangular or square. Circular.
sqm
sqm sqm sqm
sqm sqm
sqm sqm
9.25 9.25.1 9.26
WOOD WORK
WOOD WORK WOOD WORK
Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters (overall area of door shutters to be measured). Decorative type door. Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).
sqm sqm
9.27
WOOD WORK
9.27.1 9.27.1.1
WOOD WORK WOOD WORK
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws: 35 mm thick shutters. with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood. Kiln seasoned and chemically treated hollock wood. Kiln seasoned selected class of sheesham wood. With ISI marked stainless steel butt hinges of required size. Second class teak wood. Kiln seasoned and chemically treated hollock wood. Kiln seasoned selected class of sheesham wood. sqm sqm sqm sqm sqm sqm
WOOD WORK
9.27.1.1.1 9.27.1.1.2 9.27.1.1.3 9.27.1.2 9.27.1.2.1 9.27.1.2.2 9.27.1.2.3
WOOD WORK WOOD WORK WOOD WORK WOOD WORK WOOD WORK WOOD WORK WOOD WORK
9.27.2 9.27.2.1 9.27.2.1.1 9.27.2.1.2 9.27.2.1.3 9.27.2.2 9.27.2.2.1
WOOD WORK WOOD WORK
30 mm thick shutters. with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood. Kiln seasoned and chemically treated hollock wood. Kiln seasoned selected class of sheesham wood. With ISI marked stainless steel butt hinges of required size. Second class teak wood.
sqm sqm sqm sqm
9.27.2.2.2 9.27.2.2.3 9.28 9.29 9.3
Kiln seasoned and chemically treated hollock wood. Kiln seasoned selected class of sheesham wood. Deleted. Deleted. Deleted.
sqm sqm
9.31 9.31.1 9.31.2 9.32 9.33
WOOD WORK
Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using 35 mm thick shutters galvanised wire gauge with average width of aperture 1.4 mm in both 30 mm thick shutters dia 0.63 mm as per IS :1568 for doors, windows directions with wire of MISCELLANEOUS WOOD WORK and clerestory windows including ISI marked M.S. pressed butt hinges Providing 50x50x50mm 2nd with teak wood plugs including cutting bright finished of required sizeclass necessary screws as per directions brick work and fixing in of Engineer-in-charge: cement mortar 1:3 (1 cement : 3 fine sand) and making good the walls etc. Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised M.S. screws including drilling holes in masonry work /CC/ R.C.C. and making good etc. complete. 25 mm long 32 mm long 40 mm long 50 mm long Providing and fixing 2nd class teak wood plain lining tongued and grooved , including wooden plugs complete with necessary screws and priming coat on unexposed surface. 40 mm thick. 25 mm thick. 20 mm thick 12 mm thick Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination on other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete : 12 mm thick 18 mm thick 25 mm thick
sqm sqm each
9.33.1 9.33.2 9.33.3 9.33.4 9.34 9.34.1 9.34.2 9.34.3 9.34.4 9.35
each each each each
sqm sqm sqm sqm
9.35.1 9.35.2 9.35.3
sqm sqm sqm
9.36 9.36.1 9.37 9.37.1 9.38 9.39
WOOD WORK
WOOD WORK WOOD WORK
WOOD WORK WOOD WORK
WOOD WORK
9.39.1 9.39.2 9.4 9.40.1 9.40.1.1 9.40.1.2 9.40.2 9.40.2.1 9.40.2.2 9.41 9.41.1 9.42
WOOD WORK WOOD WORK WOOD WORK WOOD WORK WOOD WORK WOOD WORK WOOD WORK WOOD WORK
Providing and fixing specified wood frame work consisting of battens 50x25 mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete. Kiln seasoned and chemically treated hollock wood. Providing and fixing plywood 4 mm thick one side decorative veneer conforming to IS: 1328 (type-1) for plain lining / cladding with necessary screws, priming coat on unexposed surface with: Decorative veneer facings of approved manufacture. Providing and fixing 4mm thick coir veneer board, ISI marked IS : 14842, plain lining with necessary screws, priming coat on unexposed surface etc., complete. Providing and fixing skirting of Pre-laminated with (one side decorative and other side balancing lamination) flat pressed, 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete : 18 mm thick 25 mm thick Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 2nd class teak wood 50x12 mm 50 x 20 mm Kiln seasoned and chemically treated hollock wood. 50x12 mm 50x20 mm Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm apart (frames to be paid separately) including fixing 50x12 mm beading complete with : Second class teak wood. Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked, including top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.S. pipe 20 mm dia ( heavy type ) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS : 14842, including top cover of 6 mm coir veneer board, nickle plated M.S. Pipe 20 mm dia. (heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. Flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete Extra for using veneered particle board conforming to IS 3097 Grade I, in item of pelmet 18mm thick 150mm wide. Non decorative veneer on both sides. Particle board with decorative veneering on both sides. Providing and fixing teak wood lipping of size 25x3 mm in pelmet.
cum
sqm sqm
sqm sqm
metre metre
metre metre
WOOD WORK WOOD WORK
sqm metre
9.43
WOOD WORK
metre
9.44 9.44.1 9.44.2 9.45
WOOD WORK
metre metre metre
9.46 9.46.1 9.46.2 9.46.3 9.47 9.47.1 9.47.2 9.48 9.48.1 9.48.2 9.49
WOOD WORK
Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete : 12 mm dia. 20 mm dia. 25 mm dia. Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : 20 mm dia (heavy type) 25 mm dia (heavy type) Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. Fixed to openings /wooden frames with rawl plugs screws etc. Providing and fixing expanded metal 20x60 mm strands 3.25 mm wide and 1.6 mm thick for windows etc. including 62 x19 mm beading of II nd class teak wood and priming coat with approved steel primer all complete. Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of second class teak wood and priming coat with Providing and fixing fly proof galvanized M.S. wire gauge to windows approved steel primer all complete. and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm all complete. With 2nd class teak wood beading 62X19 mm. With 12 mm mild steel U beading. Deduct for fixing 75x25 mm hard drawn steel wire fabric of weight not less than 7.75 Kg. per sqm in panelled and glazed door and window shutter instead of glass sheet 4 mm thick. Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) Providing beams including hoisting, fixing in position and applying wood preservative for the unexposed surfaces, etc. complete with : Sal wood. Hollock wood. BRIGHT FINISHED M.S. FITTINGS Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 125x65x2.12 mm 100x58x1.90 mm 75x47x1.70 mm 50x37x1.50 mm Providing and fixing ISI marked, IS : 1341, M.S. heavy weight butt hinges with necessary screws etc. complete : 125x90x4.00 mm 100x75x3.50 mm 75x60x3.10 mm 50x40x2.50 mm Note: - In coastal areas, M.S. heavy weight butt hinges or stainless steel hinges shall be used.
metre metre metre
metre metre
kg kg sqm
WOOD WORK
9.5 9.51
WOOD WORK
sqm
WOOD WORK
9.51.1 9.51.2 9.52 9.53
sqm sqm sqm each
WOOD WORK
9.54 9.54.1 9.54.2 9.55 9.55.1 9.55.2 9.55.3 9.55.4 9.56 9.56.1 9.56.2 9.56.3 9.56.4
WOOD WORK
cum cum
each each each each
each each each each
WOOD WORK
9.57 9.57.1 9.57.2 9.57.3 9.57.4 9.58 9.58.1 9.58.2 9.58.3 9.58.4 9.59 9.59.1 9.59.2 9.59.3 9.6 9.60.1 9.60.2 9.60.3 9.61 9.61.1 9.61.2 9.61.3 9.62 9.62.1 9.62.2 9.63 9.63.1 9.63.2 9.63.3 9.63.4 9.64
WOOD WORK
COPER OXIDISED MILD STEEL FITTINGS (COPPER OXIDISED AS PER IS: 1378) Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete. 125x65x2.12 mm 100x58x1.90 mm 75x47x1.70 mm 50x37x1.50 mm Providing and fixing ISI marked oxidised M.S. pressed Parliamentary hinges with necessary screws etc. complete : 150x125x27x2.80 mm 125x125x27x2.80 mm 100x125x27x2.80 mm 75x100x20x2.24 mm Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete : 150 mm 125 mm 100 mm Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete. 150 mm 125 mm 100 mm Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plating and fixing with necessary screws etc., complete. Overall width 35 mm. Overall width 50 mm. Overall width 65 mm. Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 300x16 mm 250x16 mm Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10 mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing ISI marked 85x42mm oxidised M.S. pull bolt lock conforming to IS : 7534 with necessary screws bolts, nut and washers etc. complete. Providing and fixing ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete : 300x20x6 mm 250x20x6 mm Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm 100 mm 75 mm
each each each each
each each each each
each each each
each each each
metre metre metre
each each
WOOD WORK
9.65 9.65.1 9.65.2 9.66 9.66.1 9.66.2 9.66.3
WOOD WORK
each each
each each each
9.67 9.67.1 9.67.2 9.67.3 9.68 9.68.1 9.68.2 9.68.3 9.69
WOOD WORK
WOOD WORK
9.7 9.70.1 9.70.2 9.70.3 9.70.4 9.71 9.71.1 9.71.2 9.71.3 9.72 9.72.1 9.72.2 9.72.3 9.72.4 9.72.5 9.72.6 9.72.7 9.73 9.73.1 9.73.2 9.73.3 9.73.4 9.74 9.74.1 9.74.2 9.74.3 9.74.4 9.75 9.75.1 9.75.2
WOOD WORK
WOOD WORK WOOD WORK WOOD WORK WOOD WORK WOOD WORK WOOD WORK WOOD WORK WOOD WORK WOOD WORK
Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : 150 mm 115 mm 90 mm Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete. 300 mm weighing not less than 200 gms. 250 mm weighing not less than 150 gms. 200 mm weighing not less than 120 gms. Providing and fixing oxidised M.S. Safety chain with necessary fixtures for doors. (Weighting not less than 450 gms.) STAINLESS STEEL FITTINGS Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90 mm 100X58X1.90 mm 75x47x1.80 mm 50x37x1.50 mm Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : 125x64x2.50 mm 100x60x2.50 mm 75x50x2.50 mm BRASS FITTINGS Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) 125x70x4 mm (ordinary type) 100x85x5.5 mm (heavy type) 100x70x4 mm (ordinary type) 75x65x4 mm (heavy type) 75x40x2.5 mm (ordinary type) 50x40x2.5 mm (ordinary type) Providing and fixing bright finished brass parliamentary hinges with necessary screws etc. complete : 150x125x27x5 mm 125x125x27x5 mm 100x125x27x5 mm 75x100x20x3.2 mm Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing bright finished brass door latch with necessary screws etc. complete : 300x16x5 mm 250x16x5 mm
each each each
each each each each
each each each each
each each each
each each each each
each each each each
WOOD WORK WOOD WORK
each each
9.76 9.77 9.78 9.79 9.79.1 9.79.2 9.79.3 9.79.4 9.8
WOOD WORK
WOOD WORK
WOOD WORK
WOOD WORK
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing bright finished brass night latch including necessary screws etc. complete (best make of approved quality). Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers including necessary screws etc. complete (best make of approved quality) : 40 mm 50 mm 65 mm 75 mm Providing and fixing 50 mm bright finished brass cup board or wardrobe knob with necessary screws (best make of approved quality) Providing and fixing bright finished brass handles with screws etc. complete : 125 mm 100 mm 75 mm Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm) with necessary accessories and screws etc. complete. Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete. Providing and fixing bright finished brass casement window fastener with necessary screws etc. complete. Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc. complete : 300 mm weighing not less than 330 gms 250 mm weighing not less than 280 gms 200 mm weighing not less than 240 gms Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete: 150 mm 115 mm 90 mm CHROMIUM PLATED BRASS FITTINGS Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing chromium plated brass night latch including necessary screws etc. complete (Best make of approved quality).
each each each
WOOD WORK WOOD WORK
9.81 9.81.1 9.81.2 9.81.3 9.82 9.83
WOOD WORK
WOOD WORK
9.84
WOOD WORK
each
9.85 9.86 9.86.1 9.86.2 9.86.3 9.87 9.87.1 9.87.2 9.87.3 9.88 9.89
WOOD WORK
each
WOOD WORK
each each each
WOOD WORK
9.9 9.90.1 9.90.2 9.90.3 9.90.4 9.91 9.92 9.92.1 9.92.2 9.92.3 9.93 9.94 9.94.1 9.94.2 9.94.3
WOOD WORK
Providing and fixing special quality chromium plated brass cupboard locks with six levers including necessary screws etc. complete (Best make of approved quality) of : Size 40 mm Size 50 mm Size 65 mm Size 75 mm Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete. Providing and fixing chromium plated brass handles with necessary screws etc. complete: 125 mm 100 mm 75 mm Providing and fixing chromium plated brass casement window fastener with necessary screws etc. complete. Providing and fixing chromium plated brass casement stays (straight peg type) with necessary screws etc. complete : 300 mm weighing not less than 330 gms 250 mm weighing not less than 280 gms 200 mm weighing not less than 240 gms ANODISED ALUMINIUM FITTINGS (ALL FITTINGS SHALL BE ISI MARKED) Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 125x75x4 mm 125x63x4 mm 100x75x4 mm 100x63x4 mm 100x63x3.2 mm 75x63x4 mm 75x63x3.2 mm 75x45x3.2 mm Note :- Aluminum hinges shall not be used in wooden shutters, stainless steel hinges shall be preferred. Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300x16 mm 250x16 mm Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : 300x10 mm 250x10 mm 200x10 mm 150x10 mm
WOOD WORK
each each each each
WOOD WORK
each each each
9.95
WOOD WORK
9.95.1 9.95.2 9.95.3 9.95.4 9.95.5 9.95.6 9.95.7 9.95.8
9.96
WOOD WORK
9.96.1 9.96.2 9.97
each each
WOOD WORK WOOD WORK
9.97.1 9.97.2 9.97.3 9.97.4
each each each each
9.97.5 9.98
WOOD WORK WOOD WORK
9.99
WOOD WORK
9.1
WOOD WORK
100x10 mm Providing and fixing aluminium pull bolt lock anodised ISI marked (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws bolts, nut and washers etc. complete. Providing and fixing 50cm long aluminium kicking plate 100x3.15 mm anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with necessary screws etc. complete. Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 125 mm 100 mm 75 mm Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Single rubber stopper Twin rubber stopper Providing and fixing aluminium casement stays ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles with necessary screws etc. complete (Best make of approved quality). Providing and fixing aluminium tee channels (heavy duty) with rollers, stop end in pelmets as curtain rod. GYPSUM BOARD PARTITIONS Providing and fixing partition upto ceiling height consisting of G.I. frame and required board including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and
each each
each
9.100.1 9.100.2 9.100.3 9.1
each each each
9.101.1 9.101.2 9.1
each each each
9.1
WOOD WORK
each
9.1
WOOD WORK
metre
WOOD WORK
9.11
WOOD WORK
WOOD WORK
ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corner (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete. 75 mm overall thickness partition with 12.5 mm thick double skin fire rated board conforming to IS: 2095: part I. 75mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum board conforming to IS: 2095: part I 66mm overall thickness Partition with 8mm thick double skin Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process with Compressive Strength 225 kg/sq.cm, Bending Strength 100 kg./ sq.cm. 66mm overall thickness partition using 8mm thick double skin nonasbestos multipurpose cement board reinforced with cellulose fibre manufactured through autoclaving process (High pressure steam cured) as per IS: 14862 with suitable fibre cement screw. Providing and fixing PTMT handles with necessary screws etc. complete. 125x34x24 mm weighing not less than 23 gms. 150x34x24 mm weighing not less than 26 gms. sqm sqm sqm
9.105.1 9.105.2 9.105.3
WOOD WORK
WOOD WORK
WOOD WORK
9.105.4
WOOD WORK
sqm
9.11 9.106.1 9.106.2
WOOD WORK
WOOD WORK WOOD WORK
each each
9.11 9.107.1
WOOD WORK
WOOD WORK
Providing and fixing PTMT Butt hinges with necessary screws etc. complete. 75x60x10 mm fitted with 5.5 mm dia M.S. Bright Bar Rod weighing not less than 34 gms.
each
9.107.2 9.11 9.108.1 9.108.2 9.11 9.11
WOOD WORK
WOOD WORK
100x75x10 mm fitted with 5.5 mm dia MS Bright Bar Rod weighing not less than 53 gms. Providing and fixing PTMT Tower Bolts with 12 mm one piece rod inside and necessary screws etc., complete. 152x42x18 mm weighing not less than 60 gms. 202x42x18 mm weighing not less than 78 gms. Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms. Providing and fixing Bamboo jaffery/ fencing consisting of superior quality 25mm dia (Average) half cut bamboo placed vertically and fixed together with three numbers horizontal running members of hollock wood in scantling of section 50X25mm fixed with nails and G.I wire on existing support complete as per direction of Engineer-in-charge. Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood. 50x50mm (base and height). Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5mm fixed with wooden adhesive of approved quality and screws/ nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge. Providing and fixing bright finished 100mm mortice lock with 6 levers without pair of handles for aluminium door with necessary screws etc complete (Best make of approved quality) as per direction of Engineerin-charge. Providing and fixing magnetic catcher in cupboard / ward robe shutters including fixing with necessary screws etc. complete (Best make of approved quality. Triple strip vertical type. Double strip (horizontal type). Providing and fixing powder coated telescopic drawer channels 300mm long with necessary screws etc. complete as per directions of Engineerin-charge. Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by P/F stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) Providing and fixing factory made UPVC door frame made of UPVC extruded sections having an overall dimension as below (tolerance 1mm), with wall thickness 2.0 mm ( 0.2mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ( 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge Extruded section profile size 48x40 mm. Extruded section profile size 42x50 mm. Providing and fixing to existing door frames.
each
each each each sqm
WOOD WORK
9.11
WOOD WORK
9.111.1 9.11
WOOD WORK WOOD WORK
metre metre
9.11
WOOD WORK
each
9.11 9.114.1 9.114.2 9.12 9.12
WOOD WORK
each each one set each
WOOD WORK
9.12
WOOD WORK
9.117.1 9.117.2 9.12
metre metre
9.118.1
WOOD WORK
WOOD WORK
24 mm thick factory made PVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm ( 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm ( 0.1 mm) wall thickness. The lock rail made up of 'H' section, a UPVC hollow section of size 100x24 mm and 2 mm ( 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a UPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm ( 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a UPVC hollow section of size 60x30 mm and wall thickness 2 mm ( 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm ( 0.1 mm) wall thickness. The lock rail made up of 'H' section, a UPVC hollow section of size 100x30 mm and 2 mm ( 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a UPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm ( 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. 25mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762mm X 25mm or less as per requirement with an average wall thickness of 1mm ( 0.3mm). PVC foam end cap of size 23x10mm are provided on both vertical edges to ensure the overall thickness of 25mm. An M.S. tube having dimensions 19mm x 19mm and 1.0 mm ( 0.1mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25MM X 11MM. Door shutter shall be reinforced with special polymeric reinforcements as per manufactures' specification and direction of Engineer-in-charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size, complete as per manufacturers specification and direction of Engineerin-Charge. Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture . M.S. frame covered with 5mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45degree angle on both side forming styles;
sqm
9.118.2
WOOD WORK
sqm
9.118.3
WOOD WORK
sqm
9.12
WOOD WORK
metre
WOOD WORK
9.12
WOOD WORK
9.120.1 9.120.2 9.12
30 mm thick plain PVC door shutters. 30 mm thick pre laminated PVC door shutters. Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90mm x 45mm having single rebate of 32mm x 15mm to receive shutter of 30mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat . Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. Providing and fixing to existing door frames. 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels conforming to IS: 14856 including fixing to frames. 30mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & Jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement , including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturers specification and direction of Engineer-in-charge. Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer , all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5 mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100 mm x 8 mm complete as per manufacturer's specifications and direction of Engineer-in-charge. Non decorative finish. Decorative finish (both side wood grained finish). Providing and fixing PVC rigid foam sheet 1mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive.
sqm sqm metre
9.12 9.122.1
WOOD WORK WOOD WORK
sqm
9.122.2
WOOD WORK
sqm
WOOD WORK
9.12
WOOD WORK
metre
9.12
WOOD WORK
9.124.1 9.124.2 9.13
sqm sqm sqm
9.13
WOOD WORK
9.126.1 9.126.2 9.13
Providing and fixing 12mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick. Marine plywood conforming to IS: 710 Fire retardant plywood conforming to IS: 5509. Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality 1.5 mm thick. 1.0 mm thick. Providing and fixing factory made Fiberglass Reinforced plastics (F.R.P.) chajja 4mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) Machine Technology, resulting in void free compact laminate in single piece, having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2nos. vertically and 1nos. horizontally 50x2mm thick M.S. flat with 12mm in built hole for grouting on the existing wall along with the 50mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically, including all necessary fittings . The FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746 duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather & sunlight, Providing and fixing cup board shutters 25mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked exterior grade (Grade l Type ll) having one side decorative lamination and other side balancing lamination including IInd class teak wood lipping of 25mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of the Engineer-in-Charge Providing and fixing cup board shutters with 25mm thick veneered particle board IS : 3097 marked exterior grade (Grade I) of approved make including IInd class teak wood lipping of 25mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of Engineer-in-Charge. With decorative veneering on one side and commercial veneering on other side. With non decorative veneering on both sides. Providing and fixing factory made shutters of Pre-laminated particle board flat pressed three layer or graded wood particle board with one side decorative finish and other side balancing lamination conforming to IS: 12823 Grade l Type ll, of approved design, and edges sealed with water resistant paint and lipped with aluminium 'U' type edge beading all-round the shutter, including fixing with angle cleat, grip strip, cadmium plated steel screws including fixing of aluminium hinges 100x63x4 mm etc. complete as per architectural drawing and direction of Engineer-in-Charge (Cost of 'U' beading and hinges will be paid for separately). 25 mm thick.
sqm sqm
9.127.1 9.127.2 9.13
sqm sqm sqm
WOOD WORK
9.13
WOOD WORK
sqm
9.13
WOOD WORK
9.130.1 9.130.2 9.13
WOOD WORK
sqm sqm
WOOD WORK WOOD WORK
9.131.1
WOOD WORK
sqm
9.13 9.13
WOOD WORK
WOOD WORK
Providing and fixing aluminum U beading of required size to Prelaminated /flush door shutter including fixing etc. complete as per direction of Engineer-in-charge. Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the 'W' profile (0.55mm thick ) having a knurled web of 51.55mm and two flanges of 26mm each with lips of 10.55 mm, placed @ 610mm C/C in perimeter channel having one flange of 20mm and another flange of 30mm with thickness of 0.55mm and web of length 27mm. Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves @ 610mm C/C with fully threaded self-tapping dry wall screws. Board is fixed to the 'W' profile with 25 mm countersunk ribbed head screws @ 200mm C/C., all complete as per the drawing & directions of engineer-in-charge the joints of the boards are finished with specially formulated jointing
kg
WOOD WORK WOOD WORK
9.133.1
WOOD WORK
9.133.1.1 9.133.2 9.133.2.1 9.133.3 9.133.3.1 9.13
WOOD WORK WOOD WORK
9.134.1 9.134.1.1 9.134.1.1.1 9.134.1.1.2 9.134.1.1.3 9.134.1.2 9.134.1.2.1 9.134.1.2.2 9.134.1.2.3 9.134.2 9.134.2.1 9.134.2.1.1 9.134.2.1.2 9.134.2.1.3 9.134.2.2 9.134.2.2.1 9.134.2.2.2 9.134.2.2.3
WOOD WORK WOOD WORK
compound and 48mm wide jointing tape to provide seamless finish. Tapered edge calcium silicate board made with calcareous & siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with compressive strength 225 kg/sq.cm, Bending strength 100 kg/sq.cm. 10mm thick. Non-asbestos multipurpose cement board reinforced with cellulose fibre manufactured through autoclaving process (high pressure steam cured) as per IS 14862 with suitable fibre cement screw. 8 mm thick. Gypsum board conforming to IS: 2095 Part - I . 12.5 mm thick. NEW ITEMS Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws: 35 mm thick shutters. with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood. Kiln seasoned and chemically treated hollock wood. Kiln seasoned selected class of sheesham wood. With ISI marked stainless steel butt hinges of required size. Second class teak wood. Kiln seasoned and chemically treated hollock wood. Kiln seasoned selected class of sheesham wood. 30 mm thick shutters. with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood. Kiln seasoned and chemically treated hollock wood. Kiln seasoned selected class of sheesham wood. With ISI marked stainless steel butt hinges of required size. Second class teak wood. Kiln seasoned and chemically treated hollock wood. Kiln seasoned selected class of sheesham wood.
sqm
sqm sqm
WOOD WORK WOOD WORK WOOD WORK WOOD WORK WOOD WORK WOOD WORK WOOD WORK WOOD WORK
9.14
WOOD WORK
9.135.1 9.135.2 9.14
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With 2nd class teak wood beading 62X19 mm. With 12 mm mild steel U beading. Providing and fixing fire resistant door frame of section 143 x 57 mm having built in rebate made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based concrete mix, suitable for mounting 60 minutes fire rated door shutters. The frame is fitted with intumuscent fire seal strip of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in-charge (Dash fastener to be paid for separately). Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II) tested and certified as per laboratory approved by Engineer-in-charge with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100mm wide, bottom rail 200mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge (panneling to be paid for separately). Providing and fixing glazing in fire resistant door shutters, fixed panels, ventilators and partitions etc., with G.I. beading of appropriate size made out of 20 SWG G.I.sheet (zinc coating not less than 120 gm/m2), fire resistant sealant, including applying a coat of approved fire resistant primer on G.I. beading etc. complete all as per direction of Engineer-incharge. With clear fire resistant glass panes 6mm thick of approved brand, having minimum 60 minutes fire resistance. Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete. Providing and fixing plain lining with necessary screws/nuts & bolts/nails including a coat of approved primer on one face and fixed on wooden /steel frame work complete as per direction of Engineer-in-charge. (Frame work shall be paid for separately) 12mm thick commercial ply conforming to IS : 1328 BWR type. Providing and fixing PVC Door Frame of size 50x47mm with a wall thickness of 5 mm ( 0.2 mm) made out of single piece extruded PVC profile, with mitred cut joints and joint with 2nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100mm long anchor fasteners complete, all as per manufacturers specification and direction of Engineer -in- charge.
sqm sqm metre
9.14
WOOD WORK
sqm
9.14
WOOD WORK
9.138.1 9.14
WOOD WORK
sqm nos.
WOOD WORK
9.14
WOOD WORK
9.140.1 9.14
WOOD WORK WOOD WORK
sqm metre
WOOD WORK WOOD WORK
9.14
WOOD WORK
35 mm thick factory made Solid panel PVC Door shutter made out of single piece extruded soild PVC profiles, 5 mm ( 0.2mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5mm thick solid PVC Lock rail of size 115 mm x 35 mm x 35 mm, out of which 95 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of Engineer-in-charge. Non decorative finish (matt finish). Decorative finish (wood grained finish). Providing and Fixing factory made uPVC door frame made of uPVC exturded sections , of size 65 mm x 55 mm with wall thickness 2.0 mm ( 0.2 mm) , corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm (0.2 mm), including providing & fixing 3 nos. of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fastners, all complete as per manufacturer's specification and direction of Engineer-in-charge. Providing and fixing 37 mm thick factory made PVC door shutter, styles and rails made of PVC hollow section of size 100mm x 37mm with wall thickness 2 mm ( 0.2mm), with inbuilt bead on one side, styles and rails mitered cut and joint at the corners by means of 2 nos. of plastic brackets of size 75mm x 220 mm at each corner and stainless steel screws, reinforcing the hinge side of style by inserting PVC profile of size 28mm x 30mm, with wall thickness 2 mm ( 0.2mm). Lockrail of size 100mm x 37mm, wall thickness 2mm (+ 0.2mm) will be fixed to the vertical styles. Providing with PVC snapfit beads and panel of size 100mm x 20 mm, and inserting 2 nos. tie bar of 6 mm dia and fastening with nuts and washers complete, all as per manufacturer's specification and direction of Engineer-in-charge. Providing and Fixing, factory made, PVC door frame made of PVC extruded sections of size 75mm x 53 mm, having wall thickness 2.0mm ( 0.2mm). Both verticals sides of the frame reinforced with PVC profile of cross section size 28mm x 30mm x 2 mm thickness ( 0.2 mm) and 75 mm x 200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut jointed and fusion welded together, including providing and fixing 3 nos. of 125mm long stainless steel hinges to frame, fixing the frame with jamb with required nos. & sizes of anchor dash fastener, all complete as per manufacturer's specification and direction of engineer-in-charge. sqm sqm metre
9.142.1 9.142.2 9.14
9.14
WOOD WORK
sqm
9.15
WOOD WORK
metre
WOOD WORK WOOD WORK
9.15
WOOD WORK
Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115mm x 37mm with wall thickness 2 mm ( 0.2mm) with inbuilt beading on one side, the styles and rails mitred cut and joint at corners by inserting 2 nos. PVC profile reinforcement of size 75 mm x 200 mm long with cross section size of 28mm x 30mm having wall thickness 2 mm ( 0.2mm). Styles, rails and reinforcements to be fusion welded together. Only hinge side vertical style to be reinforced with PVC profile reinforcement in full length. Printed and laminated PVC lock rail of size 110mm x 37mm having wall thickness 2 mm ( 0.2mm) to be welded horizontally with the vertical styles after inserting PVC profile reinforcement as in styles and rails, providing with PVC snap fit beading, panels of 100 x 20 mm printed & laminated and inserting 2 nos. 6 mm dia. bright steel rod horizontally with both side threaded and tightened with check nuts and washers complete, all as per manufacturer's specification and direction of engineer-in-charge. Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 0.2mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners, all complete as per direction of Engineer-in-charge. (Glazing, hardware hinges and fitting etc. to be paid separately.)
sqm
9.15
WOOD WORK
Note:Eachmember ofwindowtob emeasureds eparatelywit hclearlength. 9.147.1 9.147.1.1 9.147.1.2 9.147.1.3 9.147.1.4 9.147.1.5 9.147.2 9.147.2.1 9.147.2.2 9.147.2.3 9.147.3 9.147.3.1 9.147.3.2 9.147.3.3 9.147.3.4 9.147.4 9.147.4.1 9.147.4.2
WOOD WORK
Casement Window (Outward/Inward opening) with hinge System. Frame (50 mm x 50mm) Sash (Style and Rail) (62 mm x 34 mm) Mullion (intermediate Section) (66mm x 50 mm) T' Profile (one vertical length in between two shutters) (24mm x 34.5mm) Glazing bead (12mm x 18mm) Casement Window (With friction hinge & outward opening) Casement Frame (67mm x 62mm) Casement Window Sash/Mullion (67mm x 75mm ) (style, rail and intermediate section) Casement Glazing bead (35mm x 18 mm) Sliding Window (Two Track, 2/4 Shutters) Two Track Sliding Frame (67mm x 52mm) Sliding window Sash (60mm x 44mm) Sliding Interlock for Window (one vertical length in each shutter)( 45.5 mm x 28 mm) Sliding Glazing bead (35 mm x 18 mm) Sliding Door (Two Track, 2/4 Shutters) Two Track Sliding Frame (67mm x 52mm) Sliding Door Sash (80mm x 44mm)
metre metre metre metre metre metre metre metre metre metre metre metre metre metre
9.147.4.3 9.147.4.4 9.15 9.148.1 9.148.2 9.148.3 9.148.4 9.148.5 9.15 9.15 9.15 9.15 9.15 9.15
WOOD WORK
WOOD WORK WOOD WORK
WOOD WORK
WOOD WORK
WOOD WORK
WOOD WORK
WOOD WORK
Sliding Interlock for Door (one vertical length in each shutter) (45.5 mm x 28 mm) Sliding Glazing bead (35 mm x 18 mm) Providing and fixing stainless steel (SS-304 grade) friction hinges to the side/ top hung uPVC windows, of approved quality with necessary stainless steel screws etc. as per direction of Engineer-in-charge. 200 x 19 x 1.9 mm 250 x 19 x 1.9 mm 300 x 19 x 1.9 mm 350 x 19 x 1.9 mm 400 x 19 x 1.9 mm Providing and fixing casement handle made of zinc alloyed (white powder coated) for uPVC casement window with necessary screws etc. complete. Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC sliding window with necessary screws etc. complete. Providing and fixing steel roller for uPVC sliding window with necessary screws etc. complete. Providing and fixing steel roller for uPVC sliding door with necessary screws etc. complete. Providing and fixing steel (white power coated) crescent lock for uPVC sliding window/ door with necessary screws etc. complete. Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically & horizontally ) or at required spacing near opening, with necessary welding at junctions and fixing the frame to wall/ ceiling/ floors with steel dash fasteners of 8 mm dia, 75 mm long bolt, including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer-in-charge.
metre metre
each each each each each each each each each each kg
WOOD WORK WOOD WORK
10 10.1 10.2 10.3
Steel work Steel work
Steel work
Steel work
STEEL WORK Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. Providing and fixing 1mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6mm angle iron, 3mm M.S. gusset plates at the junctions and corners, 25mm dia pulley, 40x40x6mm angle and T-iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer. Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.
kg kg sqm
10.4
Steel work
sqm
10.5
Steel work
10.5.1 10.5.2 10.6
Steel work Steel work Steel work
Using M.S. angels 40x40x6 mm for diagonal braces. Using flats 30x6mm for diagonal braces and central cross piece. Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25mm M.S. laths with 1.25 mm thick top cover. 80x1.20 mm M.S. laths with 1.20 mm thick top cover. 80x0.90 mm M.S. laths with 0.90 mm thick top cover. Providing and fixing ball bearing for rolling shutters. Extra for providing mechanical device chain and crank operation for operating rolling shutters. Exceeding 10.00 sqm and upto 16.80 sqm in the area. Exceeding 16.80 sqm in area. Extra for providing grilled rolling shutters manufactured out of 8 mm dia. M.S. bar instead of laths as per design approved by Engineer-incharge.(area of grill to be measured). Fixing standard steel glazed doors, windows and ventilators in walls, including fixing of float glass panes with glazing clips and special metalsash putty of approved make, or metal beading with screws (only steel windows, glass panes cut to size and glazing clips or metal beading with screws, shall be supplied by department free of cost. Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators side /top /centre hung with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer , but excluding the cost of other fittings, complete all as per approved design (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Extra for providing and fixing steel beading of size 10 x 10 x 1.6 mm (box type) approved shape and section with screws instead of glazing clips and metal sash putty in steel doors, windows, ventilators and composite units. Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
sqm sqm
10.6.1 10.6.2 10.6.3 10.7 10.8 10.8.1 10.8.2 10.9
Steel work Steel work Steel work Steel work Steel work
sqm sqm sqm each
sqm sqm sqm
10.1
Steel work
10.10.1 10.10.2 10.11
Steel work
kg kg
Steel work
Steel work
10.11.1 10.11.2 10.12
Steel work
kg kg metre
Steel work
Steel work
10.13
Steel work
10.13.1 10.13.2 10.14
Steel work
Steel work
Steel work
Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Providing and fixing pressed steel door frames conforming to IS: 4351 manufactured from commercial mild steel sheet of 1.60 mm thickness including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.60 mm pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges, 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:
kg kg
10.14.1 10.14.1.1 10.14.1.2 10.14.2 10.14.2.1 10.14.2.2 10.14.3 10.14.3.1 10.14.3.2 10.15 10.15.1 10.15.2 10.16
Steel work
Steel work
10.16.1 10.16.2 10.16.3 10.17
Steel work Steel work Steel work Steel work
10.18
Steel work
Profile B Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile C Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile E Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick FixingSheet, joints mitred, 10 cm. long embedded in cement concrete M.S. with 15x3 mm lugs welded and grinded finish, with profiles of block 15x10x10 cm of C.C. 1:3:6necessary butt hinges and screws and required size, including fixing of (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). applying a priming coat of approved steel primer. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes. Hot finished seamless type tubes. Electric resistance or induction butt welded tubes. Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop, all as per standard design complete. Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3mm dia. round headed screws, one lock at the corners. Clamp shall be made of 12mm dia M.S. bar bent to shape as per standard drawing. Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.
metre metre
metre metre
metre metre
kg kg
kg kg kg each
each
10.19
kg
10.2 10.21 10.22 10.23 10.24 10.25 10.25.1 10.25.2 10.26 10.26.1 10.26.2 10.26.3 10.27 10.27.1 10.27.2 10.27.3 10.27.4 10.27.5 10.28
Steel work
Steel work
Steel work
Steel work Steel work Steel work Steel work Steel work Steel work Steel work Steel work Steel work Steel work Steel work
Providing and fixing bolts including nuts and washers complete. Providing and fixing M.S. rivets of sizes in position. Welding by gas or electric plant including transportation of plant at site etc. complete. Item Shifted to Sub head 14 as item 14.73 Item Shifted to Sub head 14 as item 14.74 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying a priming coat of approved steel primer. M.S. tube. E.R.W. tubes. G.I. pipes NEW ITEMS Providing and fixing carbon steel galvanised ( minimum coating 5 micron mm 10 x60 ) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia 10 x80 mm polyamide PA 6 grade sleeve, including drilling of hole in frame , 10 x120 mm concrete/ masonry, etc. as per direction of Engineer-in-charge. 10 x140 mm 10 x160 mm Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3m and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63mm dia wire and 1.4 mm aperture on both sides Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows all complete. With 4.0 mm thick glass panes. With 5.5 mm thick glass panes. Flooring Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar including filling the joints with same mortar with common burnt clay F.P.S. (non modular) bricks: 1:4 (1 cement : 4 coarse sand) 1:6 (1cement : 6 coarse sand)
kg kg cm
kg kg
kg kg kg
each each each each each kg
10.29
Steel work
Steel work
10.29.1 10.29.2 10.3 10.30.1 10.30.2 11 11.1 11.1.1 11.1.2
Steel work
sqm sqm
Steel work
Steel work
Steel work Steel work Steel work Flooring Flooring
sqm sqm
Flooring Flooring
sqm sqm
11.2
Flooring
11.3
Flooring
Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar including filling joints with Jamuna sand (with common burnt clay F.P.S. (non modular) bricks) complete. Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate. 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, .hardening compound mixed @ 2 litre per 50kg of cement or as per manufacturers specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50kg of cement or as per manufactures specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. Cement plaster skirting (up to 30 cm height) with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement. 18 mm thick. Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete. Extra for making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc. TERRAZO FLOORING 40 mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 6mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 1mm to 4mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume including cement slurry etc. complete :
sqm
11.3.1 11.4
Flooring Flooring
sqm sqm
11.5
Flooring
sqm
11.6 11.6.1 11.7 11.8
Flooring
Flooring Flooring
sqm cum sqm
Flooring
Flooring
11.9
Flooring
Flooring Flooring
11.9.1 11.9.2 11.9.3 11.9.4 11.9.5 11.9.6
Flooring Flooring Flooring
Dark shade pigment with ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment.
11.1
Flooring
40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 31mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 9mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 4mm to 7mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder : 7 marble chips) by volume including cement slurry etc. complete. Dark shade pigment with Ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 28 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 12mm thick with white, black, chocolate, grey yellow or green marble chips of sizes from 7mm to 10mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 2:3 (2 cement marble powder mix : 3 marble chips) by volume including cement slurry etc. complete : Dark shade pigment with ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. Marble chips skirting (up to 30 cm height) rubbed and polished to granolithic finish, top layer 6 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from smallest to 4 mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume : 18 mm thick with under layer 12 mm thick in cement plaster 1:3 (1 cement : 3 coarse sand) : Dark shade pigment with ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick. Extra for laying terrazo flooring on staircase treads not exceeding 30 cm in width including cost of forming, nosing etc. sqm sqm sqm sqm sqm sqm
11.10.1 11.10.2 11.10.3 11.10.4 11.10.5 11.10.6 11.11
Flooring Flooring Flooring Flooring
11.11.1 11.11.2 11.11.3 11.11.4 11.11.5 11.11.6 11.12
Flooring Flooring Flooring Flooring Flooring
11.12.1 11.12.1.1 11.12.1.2 11.12.1.3 11.12.1.4 11.12.1.5 11.12.1.6 11.13 11.13.1 11.14
Flooring
Flooring Flooring
metre sqm
11.15
Flooring
Crazy marble stone flooring, including filling the gaps with light shade pigment with white cement marble powder mixture (3 parts of white cement : 1 part of marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 white, black or white and black marble chips of sizes from 1mm to 4mm nominal size by volume), with under layer 25mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size), including rubbing, polishing and cement slurry etc. complete : 18 mm thick crazy marble stone white, black or as specified. TILE FLOORING Precast terrazo tiles 22mm thick with graded marble chips of size upto 12mm, laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : Light shade using white cement. Medium shade using 50%white cement and 50% ordinary cement. Dark shade using ordinary cement. Ordinary cement without any pigment. Extra if terrazo tiles are laid in treads of steps not exceeding 30 cm in width. Precast terrazo tiles 22 mm thick with graded marble chips of sizes upto 12 mm, in skirting and risers of steps not exceeding 30 cm in height, on 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of : Light shade using white cement. Medium shades using 50% white cement and 50% ordinary cement. Dark shade using ordinary cement. Ordinary cement without any pigment. Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : Light shade using white cement. Medium shade using 50% white cement, 50% ordinary cement. Dark shade using ordinary cement. Ordinary cement without any pigment. Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Light shade using white cement. Medium shade using 50% white cement 50% Grey cement. Dark shade using ordinary cement. Ordinary cement without any pigment. Providing and fixing 10mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding and joints filled with acid and/or alkali resisting cement as per IS : 4457 complete as per the direction of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand). sqm
11.15.1 11.16
11.16.1 11.16.2 11.16.3 11.16.4 11.17 11.18
Flooring Flooring Flooring Flooring Flooring Flooring
sqm sqm sqm sqm sqm
Flooring
11.18.1 11.18.2 11.18.3 11.18.4 11.19
sqm sqm sqm sqm
11.19.1 11.19.2 11.19.3 11.19.4 11.2
sqm sqm sqm sqm
11.20.1 11.20.2 11.20.3 11.20.4 11.21
sqm sqm sqm sqm
11.21.1
Flooring
11.21.1.1 11.21.2 11.21.2.1 11.22
Flooring Flooring
Acid and alkali resistant tile. In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand). Acid and alkali resistant tile. Tile work in skirting, risers of steps and dado (up to 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete. Marble tiles (polished) Raj Nagar. 8 mm thick. STONE FLOORING Marble stone flooring with 18mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with : Makrana white second quality. Raj Nagar plain. Agaria White Black Zebra. Udaipur green marble Pink plain marble. Extra for pre finished nosing to treads of steps of marble stone. Extra for marble stone flooring in treads of steps and risers using single length up to 2.00 metre . KOTA STONE FLOORING Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick. Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. SAND STONE FLOORING 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 ( 1cement : 5 coarse sand) with joints finished flush. Red sand stone White sand stone 40 mm thick fine dressed stone flooring over 20 mm (average)thick base of cement mortar 1:5 (1 cement : 5 coarse sand) including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone. Red sand stone White sand stone 40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement :5 coarse sand) with joints 3mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar
sqm
sqm
11.22.1 11.22.1.1 11.23
sqm
11.23.1 11.23.2 11.23.3 11.23.4 11.23.5 11.23.6 11.24 11.25
Flooring Flooring Flooring Flooring Flooring Flooring Flooring Flooring
sqm sqm sqm sqm sqm sqm metre sqm
Flooring
11.26
Flooring
11.26.1 11.27
Flooring Flooring
sqm sqm
Flooring
11.28 11.28.1 11.28.2 11.29
Flooring
sqm sqm
Flooring
11.29.1 11.29.2 11.30
sqm sqm
11.30.1 11.30.2 11.31 11.32
Red sand stone White sand stone Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. Extra for Kota stone/ sand stone in treads of steps and risers using single length up to 1.05 metre . WOODEN FLOORING 25mm wooden planking, tongued and grooved in flooring including fixing with iron screws complete with : Second class teak wood Second class deodar wood 38mm thick wood block flooring of first class teak wood laid over 25mm thick leveling layer of cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 10mm nominal size) to be paid separately coated with a thin layer of hot bitumen penetration 80/25 (blown type) @ 2.45 kg per sqm. including fixing blocks in position after dipping in hot bitumen (blown type) up to half depth, planed, levelled smooth and finished complete. Providing and fixing M.S. angle 50x50x5 mm to act as nosing with lugs of M.S. flat 10x5 mm 10cm long forked at end 60cm apart (minimum three lugs to be provided) including necessary welding and applying a priming coat of approved primer on exposed surface etc. complete. CERAMIC GLAZED TILES Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete. Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours, shades, except White, Ivory, Grey, Fume Red Brown laid on 20mm thick bed of Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete. Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours White, Ivory, Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigments etc., complete. Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete. VITRIFIED FLOOR TILES
sqm sqm metre sqm
Flooring
Flooring
11.33 11.33.1 11.33.2 11.34
Flooring
sqm sqm sqm
11.35
Flooring
kg
Flooring
11.36
Flooring
sqm
11.37
Flooring
sqm
11.38
Flooring
sqm
11.39
Flooring
sqm
11.40
Flooring
sqm
Flooring
11.41
Flooring
11.41.1 11.41.2 11.41.3 11.41.4 11.42 11.43
Flooring
Flooring
11.44
Flooring
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 500x500 mm Size of Tile 600x600 mm Size of Tile 800x800 mm Size of Tile 1000x1000 mm Deduct for not using 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles. Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. NEW ITEMS Crazy ceramic tile flooring, with under layer 12 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), with joints not exceeding 5 mm, including filling the gaps with ordinary cement mixture & mixing with synthetic polyester fibre, triangular in shape having specific gravity of 1.34 to 1.40, cross section size ranging from 10 to 40 micron & length upto 6 mm , mixing fibre @ 125 grams per 50 kg of cement in cement mortar, including providing and mixing water proofing material in mortar @ 1 kg per 50 kg of cement , all complete as per direction of Engineerin-charge. Providing and laying 500x500x40mm thick Turf paver (Turfpave XD) on 150mm thick sub grade of compacted bed of 20mm thick nominal size stone aggregate and base course and filling with 150mm thick jamuna sand including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer-in-charge. Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make in all colours & shade in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 500x500 mm Size of Tile 600x600 mm Size of Tile 800x800 mm Size of Tile 1000x1000 mm Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer in all colours and shade in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 500x500 mm Size of Tile 600x600 mm Size of Tile 800x800 mm Size of Tile 1000x1000 mm
sqm
Flooring
11.45
Flooring
sqm
11.46
Flooring
11.46.1 11.46.2 11.46.3 11.46.4 11.47
sqm sqm sqm sqm
11.47.1 11.47.2 11.47.3 11.47.4
sqm sqm sqm sqm
11.48
Flooring
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling/ grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 500x500 mm Size of Tile 600x600 mm Size of Tile 800x800 mm Size of Tile 1000x1000 mm Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622 , of approved brand & manufacturer in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 500x500 mm Size of Tile 600x600 mm Size of Tile 800x800 mm Size of Tile 1000x1000 mm Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles sqm sqm sqm sqm sqm sqm sqm sqm sqm
11.48.1 11.48.2 11.48.3 11.48.4 11.49
Flooring Flooring
11.49.1 11.49.2 11.49.3 11.49.4 11.50 12 12.1
Roofing Roofing
12.0 ROOFING
Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00mm thick with zinc coating not less than 275gm/m 0.80mm thick with zinc coating not less than 275gm/m 0.63 mm thick with zinc coating not less than 275gm/ m Extra for straight cutting in C.G.S. sheet roofing for making opening of area exceeding 40 sq. decimeter for chimney stacks, sky light etc. : 1.00 mm thick 0.80 mm thick 0.63 mm thick Extra for circular cutting in C.G.S. sheet roofing for making opening of area exceeding 40 square decimeter : 1.00 mm thick 0.80 mm thick 0.63 mm thick Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J. or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete. 0.80mm thick with zinc coating not less than 275gm/m 0.63mm thick with zinc coating not less than 275gm/m Providing valleys of 90cm wide overall in plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8mm dia.. G.I. limpet and bitumen washers complete : 1.60mm thick with zinc coating not less than 350gm/m sqm sqm sqm
12.1.1 12.1.2 12.1.3 12.2 12.2.1 12.2.2 12.2.3 12.3 12.3.1 12.3.2 12.3.3 12.4 12.4.1 12.4.2 12.5 12.5.1
Roofing Roofing Roofing Roofing
metre metre metre
metre metre metre
Roofing Roofing Roofing
metre metre
Roofing
metre
12.6
Roofing
12.6.1 12.7
Roofing Roofing
Providing fixing of 40 cm overall width plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts, G.I. limpet and bitumen washer complete, bent to shape and fixed in wall with cement mortar 1:3 (1cement : 3 coarse sand). 1.00mm thick with zinc coating not less than 275gm/m Providing and fixing 15 cm wide 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. 0.80mm thick with zinc coating not less than 275gm/m 0.63mm thick with zinc coating not less than 275gm/m NON AC SHEET ROOFING Providing non-asbestos high impact Polypropylene reinforced cement 6mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required. Extra for straight cutting in non- asbestos polypropylene reinforced cement corrugated, semi-corrugated 6 mm thick sheet roofing for making openings of area exceeding 40 square decimeter for chimney stacks, skylights etc. Extra for circular cutting in non-asbestos polypropylene reinforced cement corrugated/semi-corrugated 6 mm thick sheet roofing for making openings of area exceeding 40 square decimeter. Extra for providing and fixing wind ties of 40x 6mm flat iron section. Providing and fixing ridges and hips in non-asbestos fibre cement high impact polypropylene reinforced roofing with suitable fixing accessories or self drilling fastener and EPDM washer etc. complete. Corrugated serrated adjustable ridges Plain wing adjustable ridges Close fitting adjustable ridges Unserrated adjustable hips NON AC ACCESSORIES Providing and fixing non-asbestos fibre cement high impact polypropylene reinforced roofing accessories in all colours with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers or with self drilling fastener and EPDM washer etc. complete: Corrugated apron pieces Eave's filler pieces North light curves ventilator curves Barge boards Ridge finials Special north light curves S type louvers
metre
Roofing
12.7.1 12.7.2 12.8
metre metre sqm
12.9
Roofing
metre
12.1 12.11 12.12 12.12.1 12.12.2 12.12.3 12.12.4
Roofing
metre metre
Roofing Roofing
Roofing Roofing Roofing Roofing Roofing
metre metre metre metre
12.13
Roofing
12.13.1 12.13.2 12.13.3 12.13.4 12.13.5 12.13.6 12.13.7 12.13.8
Roofing Roofing Roofing Roofing Roofing Roofing Roofing Roofing Roofing
metre metre metre metre metre pair each metre
12.14 12.15
Roofing
Roofing
12.15.1 12.16
Roofing Roofing
12.16.1 12.17
Roofing
Roofing
Providing flat iron brackets 50x3mm size with necessary bolts, nuts and washers etc. for fixing asbestos cement/G.S. sheets gutters with purlins. Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete : With residual type petroleum bitumen of grade VG - 10. 10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with flat tile bricks, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat : With common burnt clay F.P.S.(non modular) brick tile of class designation 10. 10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25mm thick mud mortar with bhusha @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow-dung) and covered with machine moulded tile bricks, grouted with cement mortar 1:3 ( 1 cement : 3 fine sand ) mixed with 2% of integral water proofing compound by weight of cement and finished neat. With machine moulded common burnt clay F.P.S. (non modular) brick tiles of class designation 12.5, conforming to IS 2690. Extra for every additional 1 cm thickness of mud phaska Providing and laying brick tiles over mumty roofs, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement, over 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat : With common burnt clay F.P.S. (non modular) brick tiles of class designation 10 Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete. Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75mm deep chase Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
metre
sqm
sqm
12.17.1 12.18 12.19
Roofing
sqm sqm
Roofing Roofing
12.19.1 12.2
Roofing
sqm sqm
Roofing
12.21
Roofing
12.21.1 12.22
Roofing Roofing
metre each
Roofing Roofing
12.23
Roofing
Providing sand stone slab for roofing and laying them in cement mortar 1 : 4 (1 cement : 4 coarse sand) over wooden karries or R.C.C. battens or structural steel sections (Karries or battens or structural steel sections to be paid separately) including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 fine sand ) complete :
12.23.1 12.23.1.1 12.23.2 12.23.2.1 CEILING 12.24 12.24.1 12.24.1.1 12.24.2 12.24.2.1 12.24.3 12.24.3.1 12.25
Roofing Roofing Roofing Roofing Roofing Roofing
Red sand stone slab 40 to 50 mm thick White sand stone slab : 40 to 50 mm thick Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately) : Natural colour insulating board 12 mm thick White face insulating board 12 mm thick Flame retardant face insulating board 12 mm thick Providing and fixing flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc. complete (frame work to be paid separately) : 12 mm thick Providing and fixing plain Multipurpose Cement board ( High Pressure steam cured ) as per IS : 14862, with suitable screws for fibre cement board in ceiling etc. complete (frame work to be paid separately) : 6 mm thick cement board Extra for Circular cutting including wastages in ceiling with: 2nd class teak wood planks 20 mm thick Natural colour insulating board 12 mm thick White face insulating board: 12 mm thick Flame retardant face insulating board: 12 mm thick Standard quality hard board sheet: 3 mm thick 4.5 mm thick Extra for providing and fixing ceiling to curved surfaces in narrow widths Providing and fixing false ceiling with 12 mm thick plain/ semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bonded pressed particle board conforming to IS:3087, finished with a coat of aluminium primer on both sides & edges including two coats of synthetic enamel paint of approved quality on exposed face, fixed to a grid made out of anodised aluminium (with 15 micron anodic coating) T-sections 35 x15x1.5 mm size main runners and cross runners 23.5x19x1.5 mm fixed to main runners placed 600 mm centre to centre both ways so as to form a grid of 600 mm square. The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia M.S rod fixed to roof slab by means of ceiling cleats and dash fastener. The suspenders shall be placed 600 x 1200 mm centre to centre including fixing to the frame with C.P brass screws and applying a priming coat of zinc chromate yellow primer (aluminium frame work shall be paid separately). Extra for providing 3 mm thick translucent white acrylic plastic sheets of approved quality in false ceiling instead of 12 mm thick plain or design particle board ceiling tiles.
sqm sqm
Roofing Roofing Roofing Roofing Roofing Roofing Roofing
sqm sqm sqm
12.25.1 12.26 12.26.1 12.27 12.27.1 12.27.2 12.27.2.1 12.27.3 12.27.3.1 12.27.4 12.27.4.1 12.27.5 12.27.5.1 12.27.5.2 12.28 12.29
Roofing Roofing
sqm
Roofing Roofing Roofing Roofing Roofing Roofing Roofing Roofing Roofing Roofing Roofing Roofing Roofing Roofing
sqm metre metre metre
metre metre metre sqm sqm
Roofing
12.3
Roofing
sqm
12.31
Roofing
12.31.1 12.31.2 12.32 12.33 12.34
Roofing
Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately) : Flat surfaces Curved surfaces Extra for any sunk or raised mouldings in the plaster of Paris (Gypsum anhydrous) ceiling Extra for providing plaster of Paris (Gypsum anhydrous) ceiling above 5metres height from floor level. Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS : 8183, density 24kg / m3, 50mm thick, wrapped in 200 G Virgin Polythene bags, fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24 gauge wire mesh, for top most ceiling of building. Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183. Density 16kg/m3 , 50mm thick, wrapped in 200G Virgin Polythene bags placed over existing false ceiling and held in position by criss-crossing GI wire. Thermal Insulation of roofing with Expanded polystyrene fixed with suitable adhesive to the false ceiling as per the directions of the Engineer-in-charge : With Type N - Normal 50 mm thick With Type SE - Self Extinguishing type 50 mm thick RAIN WATER SPOUT AND PIPE Providing and fixing 100 mm diameter and 60 cm long rain water spout in cement mortar 1:4 (1 cement : 4 fine sand). Stone ware spout Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. : 100 mm diameter 150 mm diameter Providing lead caulked joints to sand cast iron rain water pipes and fittings : 100 mm dia. Pipe 150 mm dia. Pipe Providing, fixing and embedding sand cast iron accessories for rain water pipes in the masonry surrounded with 12 mm thick cement mortar of the same mix, as that of masonry (lead caulking will be paid for separately) :
sqm sqm sqm sqm per metre height sqm
Roofing
12.35
Roofing
sqm.
Roofing
12.36 12.36.1 12.36.2 12.37 12.37.1 12.38.
Roofing
sqm sqm
Roofing Roofing
each
12.38.1 12.38.2 12.39 12.39.1 12.39.2 12.4
each each
each each
12.40.1 12.40.1.1 12.41
Roofing
Roofing Roofing
12.41.1
Roofing
150 mm diameter Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes. 75 mm diameter
Sand cast iron plain shoes : each
metre
12.41.2 12.42
Roofing Roofing
12.42.1 12.42.1.1 12.42.1.2 12.42.2 12.42.2.1 12.42.2.2 12.42.3 12.42.3.1 12.42.3.2 12.42.4 12.42.4.1 12.42.4.2 12.42.5 12.42.5.1 12.42.5.2 12.42.6 12.42.6.1 12.42.6.2 12.43
Roofing Roofing Roofing Roofing Roofing Roofing Roofing Roofing Roofing Roofing Roofing Roofing Roofing Roofing Roofing Roofing Roofing Roofing Roofing Roofing
110 mm diameter Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler 75 mm 110 mm Single pushfit Coupler : 75 mm 110 mm Single tee with door 75x75x75 mm 110x110x110 mm Single tee without door 75x75x75 mm 110x110x110 mm Bend 87.5 75 mm bend 110 mm bend Shoe (Plain) 75 mm Shoe 110 mm Shoe Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 75 mm 110 mm Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the rate of 1200 mm centre to centre to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling
metre
each each
each each each each each each each each each each
12.43.1 12.43.2 12.44 12.45
each each each
Roofing
Roofing
Roofing
section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm or both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I. 12.5 mm thick tapered edge gypsum fire resistant board conforming to IS: 2095- Part I. 12.5 mm thick tapered edge gypsum moisture resistant board. Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer-in-charge and as per manufacturer's specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60. Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms. Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2mm thick corrugated (2.5" or 4.2" or 6") or step-down (2" or 3" or 6" ) as specified. 2mm thick flat. Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately). Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness and of approved pattern on steel frame work complete (steel frame work to be paid separately). Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. sqm sqm sqm sqm
12.45.1 12.45.2 12.45.3 12.45.4
Roofing
Roofing
Roofing Roofing
12.46 12.47
Roofing
each
Roofing
12.47.1 12.47.2 12.48
Roofing
sqm sqm sqm
Roofing Roofing
12.49 12.5
Roofing
sqm sqm
Roofing
Roofing Roofing
12.51
Roofing
12.51.1 12.51.2 12.51.3 12.51.4 12.51.5 12.51.6 12.52
Roofing Roofing Roofing Roofing Roofing Roofing Roofing
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm). Flashings/ Aprons.( Upto 600 mm) North light curves. Barge board (Upto 300 mm). Crimp curve Gutter .(600 mm over all girth). Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 gsm/sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main "T" at 600mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, wherever, required, cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 x mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete at all heights as per specifications drawings and as directed by Engineer-in-charge.
metre metre metre metre sqm metre
12.52.1
Roofing
GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5mm thick with 8mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.
sqm
Roofing Roofing
12.52.2
Roofing
GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5mm thick with 8mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.
sqm
12.52.3
Roofing
12.5mm thick square edge PVC Laminated Gypsum Tile of size 595x595mm, made of Gypsum plasterboard; manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I , of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC ( Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing. NEW ITEMS Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture spintone/cosmos / Hexa or equivalent of size 595 x 595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main 'T' runner suitably spaced at joints to get required length and of size 24x38mm made from 0.33 mm thick (minimum) sheet, spaced 1200mm centre to centre, and cross "T" of size 24x28mm made out of 0.33mm (Minimum) sheet, 1200mm long spaced between main'T' at 600mm centre to centre to form a grid of 1200x600mm and secondary cross 'T' of length 600mm and size 24 x28mm made of 0.33mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600mm panel to from grid of size 600x600mm, resting on periphery walls /partitions on a Perimeter wall angle precoated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450mm centre to centre with 25mm long dry wall screws @ 230mm interval and laying 15mm thick densified edges calicum silicate ceiling tiles of approved texture (Spintone / Cosmos/hexa) in the grid including, cutting/ making opening for services like diffusers, grills,light fittings, fixtures, smoke detectors etc., whereever required, Main 'T' runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6mm fixed to ceiling with 12.5 mm dia and 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200mm centre to centre along main 'T' , bottom exposed with 24mm of
sqm
12.52.4
Roofing
sqm
Roofing
12.53
Roofing
Roofing Roofing
Roofing
all T-sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by engineer-incharge. Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC. value of 0.50(Minimum), light reflection > 85%, non - combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity<0.043 w/m 0 KC.
sqm
12.54
Roofing
Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing C wall angle of size 20x30x20mm made of 0.5mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300mm center to centre, suspending the main C carrier of size 10x38x10mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34mm made of GI steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive) Fixing with clip in tiles into spring 'T' with : GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5mm thick with 25mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5mm thick with 25mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation. Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection >0.70 and initial emittance >0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. Providing and laying roof insulation with 40 mm thick impervious sprayed, closed cell free Rigid Polyurethane foam over deck insulation conforming to IS - 12432 Pt. III (density of foam being 40-45 kg/cum), over a coat of polyurethane primer applied @ 6-8 sqm per litre, laying 400 G polythene sheet over PUF spray and providing a wearing course of 40 mm thick cement screed 1: 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) in chequered rough finish, in panels of 2.5 m x 2.5 m and embedding with 24 G wire netting and sealing the joints with polymerized mastic, all complete as per direction of Engineer-in-Charge. Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held in position by criss crossing GI wire etc. complete as per directions of Engineer-in-Charge. sqm
12.54.1
Roofing
12.54.2
Roofing
sqm
12.55
Roofing
sqm
12.56
Roofing
sqm
12.57
Roofing
sqm
13
Finishing Finishing
13.0 FINISHING
Note :- Rates for external plaster are for height upto 10m. from ground level unless otherwise stated. CEMENT PLASTER (IN FINE SAND)
Finishing
13.1 13.1.1 13.1.2 13.2 13.2.1 13.2.2 13.3 13.3.1 13.3.2 13.4 13.4.1 13.4.2 13.5 13.5.1 13.5.2 13.6 13.6.1 13.6.2 13.7 13.7.1 13.7.2 13.8 13.8.1 13.8.2 13.9 13.9.1 13.9.2 13.1
Finishing Finishing Finishing Finishing
Finishing Finishing Finishing Finishing Finishing Finishing Finishing Finishing Finishing Finishing Finishing Finishing Finishing Finishing Finishing Finishing Finishing
Finishing Finishing Finishing
12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) 1:6 (1 cement: 6 fine sand) 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand) 1:6 (1 cement: 6 fine sand) 20 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) 1:6 (1 cement: 6 fine sand) CEMENT PLASTER (IN COARSE SAND) 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) 1:6 (1 cement: 6 coarse sand) 15 mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand) 1:6 (1 cement: 6 coarse sand) 20 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) 1:6 (1 cement: 6 coarse sand) CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement: 3 fine sand) 1:4 (1 cement: 4 fine sand) 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : 1:3 (1 cement: 3 fine sand) 1:4 (1 cement: 4 fine sand) Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 12 mm cement plaster 20 mm cement plaster 15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall. CEMENT PLASTER IN TWO COATS 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) finished with a top layer 6mm thick cement plaster 1:6 (1 cement: 6 fine sand). 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) and a top layer 6mm thick cement plaster 1:3 (1 cement: 3 coarse sand) finished rough with sponge. 12 mm cement plaster 1:2 (1 cement: 2 stone dust) 15 mm cement plaster 1:2 (1 cement: 2 stone dust) on the rough side of single or half brick wall. 20 mm cement plaster 1:2 (1 cement: 2 stone dust) 6 MM CEMENT PLASTER 6 mm cement plaster of mix : 1:3 (1 cement: 3 fine sand)
sqm sqm
sqm sqm sqm sqm
sqm sqm
sqm sqm
sqm sqm sqm
Finishing Finishing
13.11 13.12
Finishing
sqm sqm
Finishing
13.13 13.14 13.15 13.16 13.16.1
Finishing Finishing
sqm sqm sqm
sqm
13.17 13.18 13.19
Finishing
13.19.1 13.2
13.21
Finishing
13.22 13.23 13.23.1 13.23.2 13.24 13.24.1 13.24.2 13.25 13.25.1 13.25.2 13.25.3 13.26
Finishing
Finishing Finishing Finishing Finishing Finishing
6 mm cement plaster 1:3 (1 cement: 3 fine sand) finished with a floating sqm coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams. Neat cement punning sqm ROUGH CAST PLASTER Rough cast plaster upto 10m height above ground level with a mixture of sand and gravel or crushed stone from 6mm to 10mm nominal size, dashed over and including the fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) and top layer 10mm cement plaster 1:3 (1 cement: 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. Ordinary cement finish using ordinary cement sqm PEBBLE DASH PLASTER Pebble dash plaster upto 10m height above ground level with a mixture sqm of washed pebble or crushed stone 6mm to 12.5mm nominal size, dashed over and including fresh plaster in two layers under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) and top layer 10mm cement plaster with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. Extra for providing and mixing water proofing material in cement plaster Per bag of work in proportion recommended by the manufacturers. 50 kg cement used in the mix. Extra for plastering exterior walls of height more than 10 m from ground sqm level for every additional height of 3 m or part thereof. Extra for plastering on circular work not exceeding 6 m in radius: In one coat sqm In two coats sqm Extra for plastering done on moulding cornices or architraves including neat finish to line and level: In one coat In two coats Extra for plastering : Spherical ceiling Groined ceiling Flewing soffits Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete ARTIFICIAL STONE PLASTER Extra for lining out plaster to imitate stone or concrete blocks walling PLAIN CEMENT MORTAR BANDS 12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement: 4 fine sand) : Flush Band Sunk Band Raised Band Moulded Band 18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement: 4 fine sand):
Finishing Finishing Finishing Finishing Finishing Finishing Finishing
Finishing
13.27 13.28 13.28.1 13.28.2 13.28.3 13.28.4 13.29
sqm
Finishing
Finishing
Finishing
Finishing
cm per metre cm per metre cm per metre cm per metre
Finishing
13.29.1 13.29.2 13.29.3 13.29.4 13.3
Finishing
Flush Band Sunk Band Raised Band Moulded Band 18 mm thick moulded cement mortar band in two coats under layer 12mm thick with cement mortar 1:5 (1 cement: 5 coarse sand) top layer 6mm thick with cement mortar 1:4 (1 cement: 4 fine sand). POINTING OF BRICK WORK Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement: 3 fine sand) : Flush / Ruled/ Struck or weathered pointing. Raised and cut pointing POINTING ON TILE BRICK WORK Pointing on tile brick work with cement mortar 1:3 (1 cement:3 fine sand) : Flush/ Ruled/ Struck or weathered pointing POINTING ON STONE WORK Pointing on stone work with cement mortar 1:3 (1 cement: 3 fine sand) : Flush/ Ruled pointing Raised and cut pointing Raised and cut pointing on stone work in white cement mortar 1:3 (1 white cement: 3 marble dust) Pointing on stone slab ceiling with cement mortar 1:2 (1 cement: 2 fine sand): Flush/ Ruled pointing Extra for pointing on walls on the outside at height more than 10 m from ground level for every additional height of 3 m or part there of. INTERIOR FINISHING White washing with lime to give an even shade: New work (three or more coats) Satna lime wash on walls with one coat Colour washing such as green, blue or buff to give an even shade : New work (two or more coats) with a base coat of white washing with lime New work (two or more coats) with a base coat of whiting Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade. Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer. Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work. Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :
Finishing
Finishing
Finishing
Finishing
cm per metre cm per metre cm per metre cm per metre cm per metre
Finishing
13.31 13.31.1 13.31.2 13.32 13.32.1
Finishing
sqm sqm
sqm
13.33 13.33.1 13.33.2 13.34 13.35 13.35.1 13.36
Finishing
sqm sqm sqm
Finishing
Finishing Finishing
sqm sqm
Finishing
13.37 13.37.1 13.38 13.39 13.39.1 13.39.2 13.4 13.41 13.41.1 13.42 13.42.1 13.43
Finishing Finishing Finishing Finishing Finishing
sqm sqm sqm sqm sqm
Finishing Finishing
Finishing
Finishing
sqm
Finishing
Finishing Finishing
sqm
13.43.1 13.44 13.44.1 13.45 13.45.1
Finishing Finishing Finishing Finishing Finishing Finishing
Water thinnable cement primer. EXTERIOR FINISHING Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm). Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm. Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm). Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm). Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @ 0.75 ltr / 10 sqm. Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of Painting Steel work ltr/ Deluxe Multi Surface Paint to give an even primer applied @0.75with 10 sqm of approved brand or manufacture shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture Deleted Applying priming coat : With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat) Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces: One coat Two coats Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work On concrete work Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. Applying a coat of mordant solution on G.S. sheet : With a solution of 38 gms of copper acetate in a litre of soft water With a solution made of 13 gms of hydrochloric acid in a solution of 13 gms each of copper chloride, copper nitrate and ammonium chloride dissolved in a litre of soft water.
sqm
sqm sqm
Finishing
13.46 13.46.1 13.47 13.47.1 13.48 13.48.1 13.48.2 13.48.3
Finishing Finishing
sqm
Finishing
Finishing
sqm
Finishing
Finishing
sqm sqm sqm
Finishing Finishing
13.49 13.50 13.50.1 13.50.2 13.50.3 13.50.4 13.51 13.51.1 13.51.2 13.52 13.52.1 13.52.2 13.53 13.53.1 13.54 13.54.1 13.54.2
sqm sqm sqm sqm
Finishing
Finishing
Finishing Finishing
sqm sqm
sqm sqm
Finishing
sqm
sqm sqm
13.55
Finishing
13.55.1 13.55.2 13.56
13.56.1 13.56.2 13.57 13.57.1 13.58
Finishing Finishing
13.59 13.6 13.60.1 13.61 13.61.1 13.62 13.62.1
Finishing
Finishing
Finishing Finishing
Finishing Finishing
Finishing
Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture, over and including a priming of ready mixed zinc chromate yellow primer on new work : 100 mm diameter pipes 150 mm diameter pipes Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work. 100 mm diameter pipes 150 mm diameter pipes Painting with oil type wood preservative of approved brand and manufacture: New work (two or more coats) Providing and applying two coats of fire retardant paint on cleaned wood/ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant. Coal tarring two coats on new work using 0.16 and 0.12 litre coal tar per sqm in the first coat and second coat respectively. Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work. Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. Painting with aluminium paint of approved brand and manufacture to give an even shade . Two or more coats on new work Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work. Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: Two or more coats on new work. Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work. Varnishing with varnish of approved brand and manufacture: Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish. Two or more coats glue sizing with spar varnish or an under coat of flatting varnish. French spirit polishing : Two or more coats on new works including a coat of wood filler. Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work
metre metre
metre metre
sqm sqm
sqm
sqm
sqm
sqm
Finishing
13.63 13.63.1 13.64 13.64.1 13.65 13.65.1 13.66 13.66.1 13.67 13.67.1 13.67.2 13.68 13.68.1 13.69 13.69.1
Finishing
Finishing Finishing
sqm
Finishing Finishing
sqm
Finishing Finishing
sqm
sqm sqm sqm
Finishing
sqm
Finishing
sqm
13.7 13.71 13.72
Finishing
Finishing
Finishing
Floor polishing on masonry or concrete floors with wax polish of sqm approved brand and manufacture. Lettering with black Japan paint of approved brand and manufacture per letter per cm height Washed stone grit plaster on exterior walls of height upto 10 metre sqm above ground level in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size), in panels with groove all around as per approved pattern including scrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as per specification and direction of Engineer-incharge (Payment for providing grooves shall be made separately). Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge : 15 mm wide and 15 mm deep groove 20 mm wide and 15 mm deep groove Extra for washed grit plaster on exterior walls of height more than 10m from ground level for every additional height of 3 m or part thereof. Extra for washed stone grit plaster on circular work not exceeding 6m in radius (in two coats). Forming groove of uniform size from 12x12mm and upto 25x15mm in the top layer of washed stone grit plastered surface as per approved pattern, including providing and fixing aluminum channels of appropriate size and thickness (not less than 2 mm), nailed to the under layer with rust proof screws and nails and finishing the groove complete as per specifications and direction of the Engineer-in-Charge.
13.73
Finishing
13.73.1 13.73.2 13.74 13.75 13.76
metre metre sqm sqm metre
Finishing
Finishing
13.77 13.78
Finishing
Finishing
13.79
Finishing
Finishing
13.8
Finishing
Extra for using white cement in place of ordinary cement in the top layer sqm of the item of washed stone grit plaster. Providing and applying 12 mm thick (average) premixed formulated one sqm coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven background such as bare brick/ block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete. Extra for addition of synthetic Polyester triangular fibre of length 6mm, Per Bag of effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in 50 Kg. of cement plaster/mortar by using 125gms. of synthetic Polyester cement triangular fibre for 50 Kgs. cement used in cement mortar as per directions of Engineer-in-Charge. NEW ITEMS Providing and applying white cement based putty of average thickness sqm 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.
13.81
Finishing
13.81.1 13.81.2 13.82
13.82.1 13.82.2 13.83
One coat. Two coats. Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coat. Two coats. Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.
sqm sqm
sqm Sqm
Finishing Finishing
13.83.1 13.83.2 13.84
13.84.1 13.84.2 13.85 13.85.1 13.85.2 13.85.3 14 14.1
Finishing
Finishing
Finishing
One coat. Two coats. Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. One coat. Two coats. Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre. With ready mixed red oxide zinc chromatic on steel /iron works having VOC content less than 250 grams/litre. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre.
sqm Sqm
sqm Sqm
sqm sqm sqm
Repairs to Building Repairs to Building
14.0 REPAIRS TO BUILDING

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. meters and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : With cement mortar 1:4 (1 cement : 4 fine sand). With cement mortar 1:4 (1cement: 4 coarse sand). Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete including disposal of rubbish to the dumping ground within 50 meters lead : Door chowkhats Window chowkhats Clerestory window chowkhats Fixing chowkhat in existing opening in brick / RCC wall with dash fasteners/ Chemical fasteners of appropriate size (3 nos on each vertical member of door chowkhat and 2 nos. on each vertical member of window chowkhats) including Cost of dash fasteners/ chemical fastener.
14.1.1 14.1.2 14.2
Repairs to Building Repairs to Building Repairs to Building
sqm sqm
14.2.1 14.2.2 14.2.3 14.3
Repairs to Building Repairs to Building Repairs to Building Repairs to Building
each each each each
14.4
Repairs to Building
14.4.1 14.5 14.5.1 14.5.2 14.6 14.6.1 14.6.2 14.7 14.7.1 14.7.2 14.8 14.8.1 14.8.2 14.9 14.1 14.11 14.12
Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building
Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground. For door/ window/ clerestory window. Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 4 mm Float glass panes of thickness 5.5 mm Renewing glass panes, with wooden fillets wherever necessary: Float glass panes of thickness 4 mm Float glass panes of thickness 5.5 mm Renewing glass panes and refixing existing wooden fillets: Float glass panes of thickness 4 mm Float glass panes of thickness 5.5 mm Supplying and fixing new wooden fillets wherever necessary: 2nd class teak wood fillets Hollock wood fillets. Renewal of old putty of glass panes (length) Refixing old glass panes with putty and nails Fixing old glass panes with wooden fillets (excluding cost of fillets) Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete. Regrading terracing of mud phaska covered with tiles or brick, in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement : 3 fine sand) including replacing unserviceable tiles or bricks with new Replacingdisposal of unserviceable material toin cement mortar 1:4 (1 ones and sand stone slabs in roofing, laid the dumping ground (the cementthe 4 coarse or brick excluded) within 50 metres lead. cost of : new tiles sand) including necessary repairs and cement pointing with same mortar complete including disposal of rubbish to dumping ground within 50 metres of lead : Red/ white sand stone slabs 30 to 50 mm thick. Renewing wooden battens in roofs, including making good the holes in wall and painting with oil type wood preservative of approved brand and Sal wood battens. manufacture complete including removal of rubbish to the dumping ground within 50 metres lead :roofs including making good the holes in Renewing wooden beams in walls and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead : Not exceeding 4.00 metres in length. Sal wood beams Hollock wood beams Above 4.00 metres and upto 5.00 metres length. Sal wood beams Hollock wood beams
sqm
sqm sqm sqm sqm sqm sqm metre metre metre sqm sqm each
14.13
Repairs to Building
sqm
14.14
Repairs to Building
14.14.1 14.15 14.15.1 14.16
sqm cum
14.16.1 14.16.1.1 14.16.1.2 14.16.2 14.16.2.1 14.16.2.2
Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building
cum cum cum cum
14.17 14.18
Repairs to Building
Repairs to Building
Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering including disposal of rubbish to the dumping ground within 50 metres lead. Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska :
sqm
14.18.1 14.18.2 14.19 14.2
Repairs to Building
14.21 14.22 14.22.1 14.22.2 14.23 14.24
Repairs to Building
Repairs to Building
Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building
With F.P.S. brick tiles sqm With modular brick tiles sqm Taking out wind ties from roof including cutting out rusted bolts, nuts kg etc. and removing materials to any distance within compound and stacking. Fixing of old wind tie with new fittings including painting two or more metre coats with anticorrosive bitumastic paint of approved brand & manufacturer over and including priming coat of ready mixed zinc chromate yellow primer of approved brand. Renewing bottom rail and/or top runner of collapsible gate including kg making good all damages and applying priming coat of zinc chromate yellow primer of approved brand and manufacturer. Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps, nuts and bolts/welding and erection etc. complete. Wheel 50 mm dia. and below. per wheel Wheel above 50 mm dia. per wheel EARTH WORK Pumping out water caused by springs, tidal or river seepage, broken kilo litre water mains or drains and the like. Mud mortar made with local clay good earth. cum
14.25
Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building
14.26 14.26.1 14.26.1.1 14.26.1.2 14.26.2 14.26.2.1 14.26.2.2 14.27
14.27.1
BRICK WORK Brick work with common burnt clay bricks of class designation 7.5 in mud mortar WOOD WORK Providing and fixing 25 mm thick shutters for cup board etc. : Panelled or panelled & glazed shutters : Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Glazed shutters : Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing plain jaffri door and window shutters including bright or/and black enamelled M.S. butt hinges with necessary screws 35x10mm laths placed 35mm apart (frames to be paid separately) including fixing 50x12mm beading complete with Second class teak wood.
cum
sqm sqm
sqm sqm
sqm
14.28 14.28.1 14.28.2 14.29 14.3 14.30.1 14.30.2 14.31 14.31.1 14.31.2 14.31.3 14.32 14.32.1 14.32.2 14.32.3 14.33 14.33.1 14.33.2 14.33.3 14.34 14.35 14.35.1 14.35.2 14.35.3 14.35.4 14.35.5 14.36 14.37
Repairs to Building
Providing and fixing curtain rods of 1.25mm thick brass plates with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 20 mm diameter. 25 mm diameter. Providing and fixing M.S. round or square bars with M.S. flats at required spacing in wooden frames of windows and clerestory windows. Providing joists (karries) including hoisting, fixing in position and applying wood preservative on unexposed surface etc. complete with: Sal wood. Hollock wood. Providing and fixing bright finished brass single acting spring hinges with necessary brass screws etc. complete : 150 mm 125 mm 100 mm Providing and fixing bright finished brass double acting spring hinges with necessary brass screws etc. complete : 150 mm 125 mm 100 mm Providing and fixing bright finished brass flush bolts with necessary brass screws etc. complete : 250 mm 150 mm 100 mm Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete Providing and fixing bright finished brass hard drawn hooks and eyes : 300 mm 250 mm 200 mm 150 mm 100 mm Providing and fixing bright finished brass fan light pivot with necessary brass screws etc. complete. Providing and fixing 300 mm long bright finished brass chain with hook for fan light including necessary brass screws etc. complete. Providing and fixing bright finished brass quadrant stay 300mm long with necessary brass screws etc. complete. Providing and fixing bright finished brass helical door spring (superior quality). Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type) 100x70x4 mm (ordinary type) 75x65x4 mm (heavy type)
metre metre kg
Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building
cum cum
each each each
each each each
each each each each
Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building
14.38 14.39 14.4 14.40.1 14.40.2 14.40.3
each each
each each each
14.40.4 14.40.5 14.41
14.42 14.42.1 14.42.2 14.43 14.44 14.45 14.45.1 14.46 14.47 14.47.1 14.48
Repairs to Building
14.48.1 14.49
75x40x2.5 mm (ordinary type) 50x40x2.5 mm (ordinary type) Providing and fixing 85x42mm chromium plated brass pull bolt lock with necessary chromium plated brass screws, nuts, bolts and washers etc. complete. FINISHING White washing with lime to give an even shade : Old work (two or more coats) Old work (one or more coats) Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade. Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : Old work (one or more coats) Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Old work (one or more coats) Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture over and including a priming coat of ready mixed zinc chromate yellow primer on new work : 75 mm diameter pipes Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture on old work : 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with aluminium paint of approved brand and manufacture over a priming coat of ready mixed zinc chromate yellow primer on new work : 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting with oil type wood preservative of approved brand and manufacture : Old work (one or more coats)
each each each
sqm sqm sqm sqm
sqm sqm
sqm
metre
14.49.1 14.49.2 14.49.3 14.5
metre metre metre
14.50.1 14.50.2 14.50.3 14.51 14.51.1 14.51.2 14.51.3 14.52 14.52.1
metre metre metre
metre metre metre
sqm
14.53 14.53.1 14.54 14.54.1 14.55 14.55.1 14.56 14.56.1 14.57 14.57.1 14.58 14.58.1 14.59 14.59.1 14.6
Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : One or more coats on old work. sqm Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work. sqm Painting with aluminium paint of approved brand and manufacture to give an even shade : One or more coats on old work. sqm Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work. sqm Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade : One or more coats on old work. sqm French spirit polishing : One or more coats on old work. sqm Polishing on wood work with ready made wax polish of approved brand and manufacture : Old work sqm Re-lettering with black Japan paint of approved brand and manufacture. Per letter
14.61 14.62 14.62.1 14.62.2 14.63 14.63.1 14.64 14.64.1 14.64.2 14.65
Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade. Providing and fixing C.P. brass chain and rubber plug complete for sink or wash basin : 32 mm dia 40 mm dia Distempering with 1st quality acrylic washable distemper (ready made) of approved manufacturer and of required shade and colour complete. as per manufacturer's specification. One or more coats on old work. Finishing walls with water proofing cement paint of required shade : Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat. Old work (one or more coats @ 2.20 kg/10 sqm) complete. Finishing walls with textured exterior paint of required shade :
sqm
each each
sqm sqm sqm
14.65.1 14.65.2 14.66 14.66.1
Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm. Old work (One or more coats) applied @ 1.82 ltr/10 sqm. Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface).
sqm sqm sqm
14.66.2 14.67 14.67.1 14.67.2 14.68 14.69 14.69.1 14.69.2 14.7 14.71 14.72
Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building Repairs to Building
Old work (One or more coat applied @ 0.90 ltr/10 sqm). Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface. Old work (one or more coats applied @ 0.83 ltr/10 sqm). Varnishing with varnish of approved brand and manufacture: One or more coats with copal varnish. One or more coats with spar varnish. Melamine polishing on wood work (one or more coat). Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work. Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40mm dia. M.S. tube 1.5 m centre to centre horizontal & vertical tubes joining with cup & lock
sqm
sqm sqm Deleted. sqm sqm sqm sqm sqm
system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done. Providing and fixing bright finished brass casement window fasteners or peg stays to windows/ ventilators with necessary welding and machine screws etc. complete. Providing and fixing 14 mm bright finished brass spring catch to steel centre hung ventilators with necessary welding and machine screws etc. complete. Note :- Item no. 14.73 & 14.74 are brought from Sub head 10 Steel work (Item no. 10.23 & 10.24). Dismantling & Demolishing Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer in charge. Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge.
Repairs to Building
14.73 14.74
Repairs to Building
kg each
Repairs to Building
Repairs to Building
15 15.1 15.2 15.2.1 15.2.2 15.3 15.4
Dismantling & Demolishing Dismantling & Demolishing
cum
Dismantling & Demolishing
Dismantling & Demolishing Dismantling & Demolishing Dismantling & Demolishing
cum cum cum cum
15.5 15.6 15.7 15.7.1 15.7.2 15.7.3 15.7.4 15.8 15.8.1 15.8.2 15.8.3 15.9
Dismantling & Demolishing Dismantling & Demolishing Dismantling & Demolishing Dismantling & Demolishing Dismantling & Demolishing Dismantling & Demolishing Dismantling & Demolishing Dismantling & Demolishing Dismantling & Demolishing
Extra for cutting reinforcement bars manually/ by mechanical means in sqm R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer - in -charge. Extra for scrapping, cleaning and straightening reinforcement from kg R.C.C. or R.B. work Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In mud mortar cum In lime mortar with old mughal bricks cum In lime mortar cum In cement mortar cum Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured) : From brick work in mud mortar 1000 nos From brick work in lime mortar 1000 nos From brick work in cement mortar 1000 nos Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge: In lime mortar In cement mortar Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge: In lime mortar In cement mortar Removing mortar from and cleaning stones and concrete articles (net quantity of stacks of cleaned materials will be measured) : In lime mortar In cement mortar Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below Of area beyond 3 sq. metres Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: Of area 3 sq. metres and below Of area beyond 3 sq. metres Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead: Of sectional area 40 square centimetres and above. Of sectional area below 40 square centimetres. Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional span of one metre or part thereof beyond 10 metres : Of sectional area 40 square centimetres and above. cum cum
15.9.1 15.9.2 15.1
Dismantling & Demolishing Dismantling & Demolishing Dismantling & Demolishing Dismantling & Demolishing
15.10.1 15.10.2 15.11 15.11.1 15.11.2 15.12 15.12.1 15.12.2 15.13 15.13.1 15.13.2 15.14 15.14.1 15.14.2 15.15 15.15.1
Dismantling & Demolishing Dismantling & Demolishing Dismantling & Demolishing Dismantling & Demolishing Dismantling & Demolishing Dismantling & Demolishing
cum cum
cum cum
Dismantling & Demolishing Dismantling & Demolishing Dismantling & Demolishing Dismantling & Demolishing Dismantling & Demolishing Dismantling & Demolishing
each each
each each
cum metre
Cum per metre span
15.15.2 15.16 15.16.1 15.16.2 15.17 15.17.1 15.17.2 15.18 15.19 15.2 15.21 15.22 15.23 15.23.1 15.23.2 15.24 15.25 15.26 15.27 15.28 15.28.1 15.28.2 15.29
Of sectional area below 40 square centimetres. Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional height of one metre or part thereof beyond 5 metres : Of sectional area 40 square centimetres and above. Of sectional area below 40 square centimetres. Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: R.S. Joists
Metre per metre span
Cum per metre height Metre per metre height
Dismantling & Demolishing Dismantling & Demolishing Dismantling & Demolishing Dismantling & Demolishing Dismantling & Demolishing
kg
15.3
Channels, angles, tees and flats kg Dismantling steel work in built up sections in angles, tees, flats and kg channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50metres lead. Dismantling steel work manually/ by mechanical means in built up kg sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge. Extra for dismantling trusses, rafters, purlins etc. of steel work for every Kg per additional span of one metre or part thereof beyond 10 metres metre span Extra for dismantling trusses, rafters, purlins etc. of steel work for every Kg per additional height of one metre or part thereof beyond 5 metres. metre height Extra for marking of structural steel work required to be re-erected. kg Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm sqm For thickness of tiles above 25 mm and up to 40 mm sqm Demolishing dry brick pitching in floors, drains etc. including stacking cum serviceable material and disposal of unserviceable material within 50 metres lead : Dismantling stone slab flooring laid in cement mortar including stacking sqm of serviceable material and disposal of unserviceable material within 50 metres lead. Demolishing brick tile covering in terracing including stacking of sqm serviceable material and disposal of unserviceable material within 50 metres lead. Demolishing mud phaska in terracing and disposal of material within 50 cum metres lead. Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet sqm Asbestos sheet sqm Dismantling stone slab roofing over wooden karries or R.C.C. battens cum (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Dismantling jack arch roofing and floors including stacking of sqm serviceable material and disposal of unserviceable material within 50 metres lead.
15.31
Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Demolishing thatch roofing including mats, bamboo, jaffari etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Dismantling wooden ballies in posts and struts including stacking within 50 metres lead. Dismantling and stacking within 50 metres lead, fencing posts or struts including all earth work and dismantling of concrete etc. in base of : T or L iron or pipe R.C.C. Cutting ballies or wooden posts of fencing at the point of projection above the concrete or ground and stacking the same within 50 metres lead. Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. Dismantling wooden trellis work excluding frames but including stacking the serviceable material within 50 metres lead. Dismantling expanded metal or I.R.C. fabrics with necessary battens and beading including stacking the serviceable material within 50 metres lead. Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : Up to 10 mm thick Thickness above 10 mm up to 25 mm Thickness above 25 mm up to 40 mm Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead: Thickness up to 40 mm Thickness above 40 mm up to 75 mm Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 75 to 80 mm dia pipe. 100 mm dia pipe 150 mm dia pipe Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50metres lead as per direction of Engineer-in-charge : Water bound macadam road bituminous road Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore
sqm
15.32 15.33 15.34 15.34.1 15.34.2 15.35 15.36 15.37 15.38 15.39 15.39.1 15.39.2 15.39.3 15.4 15.40.1 15.40.2 15.41 15.42 15.42.1 15.42.2 15.42.3 15.43 15.43.1 15.43.2 15.44
sqm metre
each each each kg sqm sqm
Dismantling & Demolishing Dismantling & Demolishing Dismantling & Demolishing Dismantling & Demolishing Dismantling & Demolishing Dismantling & Demolishing Dismantling & Demolishing
sqm sqm sqm
sqm sqm sqm
Dismantling & Demolishing Dismantling & Demolishing Dismantling & Demolishing Dismantling & Demolishing Dismantling & Demolishing Dismantling & Demolishing Dismantling & Demolishing Dismantling & Demolishing Dismantling & Demolishing
metre metre metre
sqm sqm
15.44.1
metre
15.44.2 15.45
15.45.1 15.45.2 15.45.3 15.46
15.46.1 15.46.2 15.47
15.47.1 15.47.2 15.48
15.49
15.5
15.51
Above 40 mm nominal bore Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineerin-charge: Up to 150 mm diameter Above 150 mm dia up to 300 mm dia. Above 300 mm diameter Dismantling steel cylinder R.C. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metres lead as per direction of Engineer-in-charge: Up to 600 mm diameter Above 600 mm diameter Dismantling asbestos cement pressure pipes including excavation and refilling trenches after taking out the pipes manually/ by mechanical means and stacking the pipes within 50 metres lead as per direction of Engineer-in-charge: Up to 150 mm diameter Above 150 mm diameter Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge. Taking out C.I. cover with frame from R.C.C. top slab of inspection chambers of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge. Dismantling of R.C.C. spun vent shaft including excavating the cement concrete pit completely, taking out the shaft, refilling the excavated gap, stacking the useful materials near the site and disposal of unserviceable materials within 50 metres lead. Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap.
metre
metre metre metre
metre metre
metre metre each
each
each
each
15.52 15.53 15.53.1 15.53.2 15.54
Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres Up to 150 mm diameter Above 150 mm diameter Dismantling of spindle fire hydrant including stacking of useful materials within 50 metres lead.
each
each each each
15.55 15.55.1 15.55.2 15.55.3 15.56 15.57
15.58
15.59
15.6
Dismantling of cement concrete platform along with curtain walls and base concrete etc. including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead : 120 x 120 cm (outside to outside) 210 x 120 cm (outside to outside) 320 x 120 cm (outside to outside) Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1 kilometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars. Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material up to a lead of 1 kilometre, as per direction of Engineer-in-charge. NEW ITEMS Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all loads including all lifts involved.
each each each sqm sqm
cum
cum
cum
16 16.1
Road Work Road Work Road Work
16.0 ROAD WORK

ROADS Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm. depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density). Supplying and stacking at site. 90 mm to 45 mm size stone aggregate. 63 mm to 45 mm size stone aggregate. 53 mm to 22.4 mm size stone aggregate. Over burnt (Jhama) brick aggregate 120 mm to 40 mm. Over burnt (Jhama) brick aggregate 90 mm to 45 mm. Stone screening 13.2 mm nominal size (Type A). Stone screening 11.2 mm nominal size (Type B). Red bajri Good earth. Moorum. Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density . sqm
16.2 16.3 16.3.1 16.3.2 16.3.3 16.3.4 16.3.5 16.3.6 16.3.7 16.3.8 16.3.9 16.3.10 16.4
Road Work
cum
Road Work Road Work Road Work Road Work Road Work Road Work Road Work Road Work Road Work Road Work Road Work Road Work
cum cum cum cum cum cum cum cum cum cum cum
16.5
Road Work
Laying water bound macadam sub-base with brick aggregate and blinding material, earth etc. including screening, sorting and spreading to template and consolidation with light power road-roller etc. complete. (payment for brick aggregate and moorum etc. to be made separately) Over burnt (Jhama) brick aggregate 120 mm to 40 mm. Over burnt (Jhama) brick aggregate 90 mm to 45 mm. Supplying, stacking and Spreading 6 mm thick red bajri, watering and rolling complete including preparation of the surface and rolling. With road roller/ hand roller. Brick edging in full brick width and half brick depth including excavation, refilling and disposal of surplus earth lead upto 50 metres. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 cum cum
16.5.1 16.5.2 16.6 16.6.1 16.7 16.7.1
Road Work Road Work
sqm
Road Work
metre
Road Work
16.8 16.8.1 16.9 16.1
Road Work
Road Work
Road Work
Road Work
16.11 16.12 16.12.1 16.13 16.13.1 16.13.2 16.14
Road Work
Road Work
Road Work
Road Work
Road Work
16.15 16.15.1
Road Work Road Work
16.15.2 16.16
Road Work
Road Work
Brick edging laid lengthwise with half brick depth including excavation, refilling and disposal of surplus earth lead upto 50 metres : With common burnt clay F.P.S. (non modular) bricks of class metre designation 7.5 Scarifying metalled (water-bound) road surface including disposal of sqm rubbish, lead upto 50m and consolidation of the aggregate received from scarifying with power road roller of 8 to 10tonne capacity. Making bajri path including preparation of subgrade, supplying and sqm laying brick aggregate of 50mm nominal size 7.5 cm deep with blinding material consisting of 12 mm moorum and 12 mm red bajri consolidated with road roller. Dry stone pitching 22.5 cm thick including supply of stones and sqm preparing surface complete. Dry brick pitching half brick thick in drains including supply of bricks and preparing the surface complete : With common burnt clay F.P.S. (non modular) bricks of class sqm designation 7.5 Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate, moorum screening, red bajri and labour required. bituminous portion cum Water bound macadam. cum Cutting bajri paths and making good the same including supply of extra sqm quantities of brick aggregate, moorum and red bajri required. FENCING Supplying at site : R.C.C. Standards post/ struts/rails/ pales of mix 1:1.5:3 (1 cement : 1.5 cum coarse sand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-in-charge (cost of earth works in excavation, concrete works in foundation to be paid separately). Welded steel wire fabric of required width having rectangular mesh kg painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming & Painting to be paid for separately). Supplying and fixing turn buckles and straining bolts for barbed wire each set fencing.
16.17
Road Work
Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire weighing 9.38 kg per 100 metres (minimum), between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) :- Payment to be made per metre cost of total length of barbed wire used. With G.I. barbed wire Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately) :- Payment to be made per metre cost of total length of barbed wire used. With G.I. barbed wire Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. Welded steel wire fabric fencing with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1 cement:5 fine sand : 10 graded stone aggregate 40mm nominal size), every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, provided with welded steel wire fabric fixed between the posts fitted and fixed with G.I. staples on wooden plugs or tied to 6 mm bar nibs with G.I. binding wire (cost of posts, welded steel wire fabric, painting, earth work in excavation and concrete to be paid for separately) : ROAD SIGNS Engraving letters in hard stone
Road Work Road Work
16.17.1 16.18
Road Work Road Work
metre
16.18.1 16.19 16.2
Road Work Road Work
metre Kg. sqm
Road Work
Road Work
16.21 16.22 16.23
Road Work
Road Work
Road Work
16.24
Road Work
16.24.1
Road Work Road Work
per cm height per letter Providing and fixing 15x15x90cm boundary stone of hard stone with top each 30 cm chisel dressed on all four sides including top (cost of excavation, refilling and concrete etc. to be paid for separately). Providing and fixing 15cm dia at top, 20cm at bottom and 90cm high each precast reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) boundary stone as per standard design including finishing smooth with cement mortar 1:3 (1 cement : 3 fine sand) (cost of excavation, refilling and concreting to be paid for separately). Providing and fixing precast reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) kilometre stone as per standard design including finishing smooth in 1:3 cement mortar (1 cement : 3 fine sand) but excluding the cost of earth work, concrete in foundation, painting and lettering etc. which shall be paid for separately. 35x111x25 cm size. each
16.24.2 16.24.3 16.25
Road Work Road Work Road Work Road Work
16.26
Road Work
50x152.5x25 cm size. 35x93.5x18 cm size. SURFACE DRESSING Surface dressing on new surface with paving bitumen of grade VG -10 of approved quality using 2.25 kg of bitumen per sqm with 1.65 cum of stone chippings 13.2 mm nominal size per 100 sqm of road surface including consolidation with road roller of 6 to 8 tonne capacity etc. complete: Surface dressing on new surface in two coats with bitumen of grade VG -10 of approved quality using 1.8kg.of bitumen per sqm with 1.5cum of stone chippings 13.2mm nominal size per 100 sqm of road surface for first coat and 1.1kg. of bitumen per sqm. with 1.00 cu. metre of stone chippings 11.2mm nominal size per 100 sqm. of road surface for second coat including consolidation of each coat separately with road roller of 6 to 8 tonne capacity etc. complete. Surface dressing on old surface with hot bitumen of grade VG - 10 of approved quality using 1.95 kg of bitumen per sqm. with 1.50 cum of stone chippings 11.2 mm nominal size per 100 sqm of road surface including consolidation with road roller of 6 to 8 tonne capacity, etc. complete. Surface dressing one coat on new surface with bitumen of specified grade at a rate of 1.95 kg/sqm. of surface area with 1.5 cum. of stone chippings 13.2 mm nominal size per 100 sqm. of road surface including consolidation with road roller of 6 to 8 tonne capacity , etc. complete : Using bitumen emulsion (minimum 50% bitumen content - RS grade conforming to IS : 8887). Surface dressing one coat on old surface with bitumen of specified grade at the rate of 1.22 kg/ sqm of surface area with 1.10 cum of stone chippings 11.2 mm nominal size per 100 sqm. of road surface including consolidation with road roller of 6 to 8 tonne capacity etc. complete : Using bitumen emulsion (minimum 50% bitumen content - RS grade conforming to IS : 8887). PREMIX CARPET Providing and applying tack coat using hot straight run bitumen of grade VG - 10 including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications : On W.B.M. @ 0.75 Kg / sqm. On bituminous surface @ 0.50 Kg / sqm. Providing and applying tack coat using bitumen emulsion conforming to IS: 8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom. With rapid setting bitumen emulsion. On W.B.M / W.M.M. @ 0.4kg/sqm. On bituminous surface @ 0.25kg/sqm. With medium setting bitumen emulsion. On W.B.M / W.M.M. @ 0.4kg/sqm. On bituminous surface @ 0.25kg/sqm. Note : Use of item no. 16.31.1 shall be restricted only for sites at sub zero temperature or for emergency applications.
each each sqm
sqm
16.27
Road Work
sqm
16.28
Road Work
16.28.1 16.29
Road Work
sqm
Road Work
16.29.1
Road Work
sqm
Road Work
16.3
Road Work
16.30.1 16.30.2 16.31 16.31.1 16.31.1.1 16.31.1.2 16.31.2 16.31.2.1 16.31.2.2
sqm sqm
Road Work Road Work Road Work Road Work Road Work Road Work Road Work
sqm sqm sqm sqm
16.32
Road Work
16.32.1 16.32.2 16.32.3 16.33
Road Work
Road Work Road Work
Road Work
16.33.1 16.33.2 16.33.3 16.34
Road Work
16.35
Road Work
16.36
Road Work
2 cm premix carpet surfacing with 1.8 cum and 0.90 cum of stone chippings of 13.2 mm size and 11.2 mm size respectively per 100 sqm. and 52 kg. and 56 kg. of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively including a tack coat with hot straight run bitumen including consolidation with road roller of 6 to 9 tonne capacity etc. complete: (tack coat to be paid for separately). With paving Asphalt grade VG - 10 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt. With paving Asphalt grade VG - 30 with no solvent With Refinery Modified Bitumen CRMB 55 conforming to IRC: SP: 531999. 2.5 cm premix carpet surfacing with 2.25 cum and 1.12 cum of stone chippings of 13.2mm and 11.2mm size respectively per 100 sqm. and 52 kg. and 56 kg. of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively including a tack coat with hot straight run bitumen including consolidation with road roller of 6 to 9 tonne capacity etc. complete. (tack coat to be paid for separately) : With paving Asphalt grade VG - 10 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt. With paving Asphalt grade VG - 30 with no solvent With Refinery Modified Bitumen CRMB 55 conforming to IRC: SP: 53. 2 cm premix carpet surfacing with 2.4cum of stone chippings 11.2 mm nominal size per 100 sqm and bitumen emulsion (medium setting min. 65% bitumen content) complying with IS : 8887 using 96kg per cum of chipping including consolidation with road roller of 6 to 9 tonne capacity etc. complete. 2.5 cm premix carpet surfacing with 3 cum of stone chippings 10 mm nominal size per 100 sqm and bitumen emulsion (medium setting min. 65% bitumen contents) complying with IS : 8887 using 96 kg per cum of chippings of road surface including consolidation with road roller etc complete . Providing and laying Bitumen Penetration Macadam with hard stone aggregate of quality, size and grading as specified, with bitumen of suitable penetration grade including required key aggregate as specified, spreading coarse aggregate with the help of self propelled / tipper tail mounted aggregate spreader and applying bitumen by a pressure distributor and then spreading key aggregate with the help of aggregate spreader complete including consolidation with road roller of minimum 8 to 10 tonne capacity to achieve specified values of compaction and surface accuracy :
sqm sqm sqm
sqm sqm sqm sqm
sqm
Road Work Road Work
16.36.1
Road Work
16.36.2
Road Work
Road Work
For 50mm compacted thickness using coarse aggregate of size 50-20 mm graded @ 0.60 cum per 10 sqm key aggregate of size 12.5 mm graded @ 0.15 cum per 10 sqm. With paving asphalt grade VG - 10 @ 50 kg/10 sqm. For 75 mm compacted thickness in two layers using stone aggregate of size 63-41 mm graded @ 0.90 cum per 10 sqm key aggregate of size 20.0 mm graded @ 0.18 cum per 10 sqm. With paving asphalt grade VG - 10 @ 68 kg/10 sqm. MASTIC AND BITUMASTIC WEARING COURSE
sqm
sqm
16.37
Road Work
Providing and laying bitumen mastic wearing course (as per specifications) with industrial bitumen of grade 85/25 conforming to IS : 702 prepared by using mastic cooker and laid to required level and slope including providing antiskid surface with bitumen precoated fine grained hard stone chipping of approved size at the rate of 0.005 cum per 10 sqm and at approximates spacing of 10cm centre to centre in both directions, pressed into surface protruding 1mm to 4mm over mastic surface, including cleaning the surface, removal of debris etc. all complete. ( Considering bitumen using 10.2% as per MORTH specification .) 25mm thick. 40 mm thick 2.5 cm thick bitumastic sheet with hot bitumen of approved quality using stone chippings (60% 12.5 mm nominal size and 40% 10 mm nominal size) @ 1.65 cum per 100 sqm and coarse sand at 1.65 cum per 100 sqm of road surface and with bitumen @ 56 kg/cum of stone chippings and @ 128 kg/cum. of sand over a tack coat with hot straight run bitumen including consolidation with road roller of 8 to 10 tonne etc. complete. (tack coat to be paid separately) : With paving Asphalt grade VG - 10 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt. With paving Asphalt grade VG - 30. With Refinery Modified Bitumen CRMB 55 conforming to IRC: SP : 53. 4 cm thick bitumastic sheet with hot bitumen of approved quality using stone chippings (60% 12.5mm nominal size and 40% 10mm nominal size) @ 2.60cum per 100 sqm and coarse sand at 2.60cum per 100 sqm of road surface and with bitumen @ 56 kg/cum. of stone chippings and at 128 kg/cum of sand over a tack coat with hot straight run bitumen including consolidation with road roller of 8 to 10 tonne etc. complete. (tack coat to be paid separately) : With paving Asphalt grade VG - 10 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt. With paving asphalt grade VG - 30 with no solvent With Refinery Modified Bitumen CRMB 55 conforming to IRC: SP SEAL COAT Providing and laying seal coat of premixed fine aggregate ( passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG - 10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road roller all complete. Providing and laying seal coat over prepared surface of road with bitumen heated in bitumen boiler fitted with the spray set spraying using 98 kg of bitumen of grade VG - 10 and blinding surface with 0.90cum of stone aggregate of 6.7 mm size (Passing 11.2mm sieve and retained on 2.36mm sieve) per 100 sqm of road surface including rolling and finishing with power road roller all complete. Note : Seal coat items to be operated only with the prior approval of Chief Engineer concerned. CONCRETE PAVEMENT Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete. sqm sqm
16.37.1 16.37.2 16.38
16.38.1 16.38.2 16.38.3 16.39
Road Work
sqm sqm sqm
16.39.1 16.39.2 16.39.3
Road Work
sqm sqm sqm
16.4
Road Work
sqm
16.41
Road Work
sqm
Road Work
Road Work
16.42
Road Work
cum
16.43
Road Work
Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting, mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints ( 10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately) Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately. Cement concrete prepared with batch mixing machine. cum Cement concrete manufactured in automatic batching plant (RMC cum plant) i/c transportation to site in transit mixer. Extra for providing and mixing hardening compound of approved quality litre as per manufacturer's specification in cement concrete. Providing and fixing in position pre-moulded joint filler in expansion Per cm joints. depth per cm width per m length Providing and laying in position bitumen hot sealing compound for expansion joints etc. Using grade A sealing compound.
Road Work
16.43.1 16.43.2 16.44 16.45
Road Work Road Work
Road Work
Road Work
Road Work Road Work
16.46 16.46.1
Road Work
Road Work
Per cm depth per cm width per m length
Road Work
16.47
Road Work
16.47.1 16.47.2 16.48
PAINTING ROAD / RUNWAY MARKING Painting runway/taxi track/apron marking with adequate no. of coats to give uniform finish with road marking paint of superior make as approved by the Engineer-in-charge i/c cleaning the surface of all dirt, scales, oil, grease and other foreign material etc. and lining out complete. New work (Two or more coats) Old work (One or more coats) Painting road surface marking with adequate no. of coats to give uniform finish with ready mixed road marking paint conforming to IS : 164, on bituminous surface in white/yellow shade including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete. New work (Two or more coats). Old work (One or more coats) MISCELLANEOUS
sqm sqm
16.48.1 16.48.2
sqm sqm
16.49
Road Work
Making bell mouth opening/ entrance of size 100x50x50cm for drainage pipe under footpath including providing cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) for shape of bell mouth including plastering providing and fixing precast R.C.C./ S.F.R.C. slab including plastering with cement mortar 1:3 (1 cement : 3 fine sand) of 6 mm thickness on exposed surface of the slab & bell mouth including centring, shuttering & neat cement punning inside the bell mouth etc. all complete. Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded microprismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retroreflective surface shall be 35 +/-5 degress to base .The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge. Preparation of sub-base road pavement with commercial dry lime (slaked), fly ash stabilised soil with a mix of 3% lime, 12% fly ash and 85% local suitable soil by weight, so as to achieve minimum field C.B.R. of 20 including mixing, rolling with road roller curing etc. all complete.
each
16.5
Road Work
each
16.51
Road Work
Road Work Road Work
16.51.1 16.52
Road Work Road Work
16.53
Road Work
Minimum thickness 15 cm. Providing and fixing precast lime fly ash concrete blocks 1:2:3:6 (1 lime: 2 fly ash : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including finishing with 10mm thick cement mortar 1:3 (1 cement : 3 coarse sand) in foot paths including preparation of sub grade with a hand rammer, laying 10 mm thick leveling course of fine sand (jamuna sand) and filling the joints with fine sand. Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m) having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal including necessary bolts or G.I. barbed wire tied to angle iron all complete as per direction of Engineer-in-charge with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) Providing and laying Dense Graded Bituminous Macadam using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions of Engineer-in-Charge.
cum cum
metre
16.54
Road Work
16.54.1
Road Work
16.54.2
Road Work
16.55
Road Work
50 to 100 mm average compacted thickness with bitumen of grade VG30 @5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity. 50 to 100 mm average compacted thickness with bitumen of grade VG30 @5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity. Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions of Engineerin-Charge. 50 to 100 mm average compacted thickness with bitumen of grade VG30 @3.50% (percentage by weight of total mix) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity. 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @3.50% (percentage by weight of total mix) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity. Providing and laying semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge. 25 mm compacted thickness with bitumen of grade VG-30 @5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity. 25 mm compacted thickness with bitumen of grade VG-30 @5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity. Providing and laying Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge. 40/50 mm compacted thickness with bitumen of grade VG-30 @5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity. 40/50 mm compacted thickness with bitumen of grade VG-30 @5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) and waste plastic additive @8% (percentage by weight of bitumen) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.
cum
cum
16.55.1 16.55.2
Road Work
cum cum
16.56
Road Work
16.56.1
Road Work
sqm
16.56.2
Road Work
sqm
16.57
Road Work
16.57.1
Road Work
cum
16.57.2
Road Work
cum
16.57.3
Road Work
16.57.4
Road Work
16.57.5
Road Work
40/50 mm compacted thickness with bitumen of grade PMB-40 @5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity. 40/50 mm compacted thickness with bitumen of grade CRMB-60 @5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity. 40/50 mm compacted thickness with bitumen of grade VG-30 @5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) prepared in drum Type Hot Mix Plant of 60-90 TPH capacity. 40/50 mm compacted thickness with bitumen of grade VG-30 @5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) and waste plastic additive @8% (percentage by weight of bitumen) prepared in drum Type Hot Mix Plant of 60-90 TPH capacity. 40/50 mm compacted thickness with bitumen of grade PMB-40 @5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) prepared in drum Type Hot Mix Plant of 60-90 TPH capacity. 40/50 mm compacted thickness with bitumen of grade CRMB-60 @5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity. Deleted. Manufacturing, supplying and fixing retro reflective sign boards made up of 2mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer--in-charge. Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm. Cautionary /warning sign boards of equilateral triangular shape having each side of 900mm with support length of 3650mm.
cum
cum
cum
Road Work
16.57.6
Road Work
cum
16.57.7
Road Work
cum
16.57.8
Road Work
cum
16.58 16.59
Road Work Road Work
16.59.1 16.59.2
Road Work
sqm sqm
Road Work
Road Work
16.6
Road Work
Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 672001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment).
Road Work
16.60.1 16.61
Road Work Road Work
Overhead informatory road signage. Providing Retro-reflective regulatory sign board of size 900mm dia meter made out of 2mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge . Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to M.S. frame of angle iron of size 40x40x4mm. The boards will be fixed to 1 No. 50x50mm square post made of M.S. angle 50x50x4mm, 4m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per direction of Engineer-in-charge. Providing and applying 2.5mm thick road marking strips (retroreflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour ,T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. Providing, laying and making kerb channel 30cm wide and 50mm thick with cement concrete 1:3:6 (1 cement: 3 coarse sand:6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth etc. complete and as per direction of Engineer-in-charge. Providing and laying 75mm thick compacted bed of dry brick aggregate of 40mm thick nominal size including spreading, well ramming, consolidating and grouting with jamuna sand including finishing smooth etc. complete as per direction of Engineer-in-charge.
sqm sqm
16.62
Road Work
sqm
16.63
Road Work
sqm
16.64
Road Work
sqm
16.65
Road Work
16.66 16.66.1 16.67
Providing and fixing post delineators made of ABS round body fitted with 2 nos.100mm dia high reflective reflectors and mounted on MS pipe of 65mm dia duly powder coated anti-rust and anti theft steel to be installed as per direction of Engineer-in-charge. Excavating holes upto 0.10 cum including getting out the excavated soil. then returning the soil as deported in layers not exceeding 20cm in depth including consolidating and deposited layer by ramming watering etc. Disposing All kind of soil. of surplus excavated soil as directed with in a lead of 50mm and and fixing m. or near ground level factory made RCC Providing lift upto 1.5 at pavement slab of M-30 grade of size 450x450x50mm, including reinforcement with 6mm dia M.S. bars 4 nos on each side including setting in position in footpath to the required level and line over a bed of 20mm average thick cement mortar 1:5 (1 cement : 5 coarse sand ), having joint thickness not more than 5mm except on curve, including filling of joints with same cement mortar and making grooves etc. complete as per direction of Engineer-in-charge. Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineerin-charge). Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia 4mm. Made of G.I. wire of dia. 4mm, PVC coated to achieve outer dia. not less than 5mm in required colour and shade. Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia. 3mm including strengthening with 2mm dia. wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Supplying and stacking of hard stone (for stone pitching) 22.5 cm thick at site. Dry stone pitching 22.5cm thick laid in courses and required profile with hammer dressed stones having no side less than 15 cm, with minimum depth of 20cm including preparing the bedding surface etc. all complete.(Payment for Stone to be made separately) 75 mm thick back filling for pitching including supplying of required materials and consolidation etc. complete with : Moorum. Stone aggregate 20 mm nominal size. Stone aggregate 40 mm nominal size.
each
each sqm
16.68
Road Work
sqm
16.69
Road Work
cum
16.7
Road Work
16.70.1 16.70.2 16.71
Road Work Road Work
sqm sqm sqm
Road Work
16.72 16.73
Road Work
cum sqm
Road Work
16.74 16.74.1 16.74.2 16.74.3
Road Work
sqm sqm sqm
16.75
Road Work
Road Work
16.76 16.77
Road Work
Road Work
Road Work
16.78
Road Work
Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately). (Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately). Deduct for using of M-20 grade concrete instead of M-25 grade concrete in C.C. pavement. Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material within all lifts and lead upto 1000 metre (by mechanical means). NEW ITEMS Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-I (size range 75 mm to 0.075 mm ) having CBR Value-30. With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25. With material conforming to Grade-III (size range 26.5 mm to 0.075 mm ) having CBR Value-20. Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. Construction of dry lean cement concrete sub base over a prepared sub-grade with coarse and fine aggregate conforming to IS:383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per specifications, cement content not to be less than 150 Kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, for all leads & lifts, laid with a mechanical paver, compacting with 8-10 tonne vibratory roller, finishing and curing etc. complete as per direction of Engineer-incharge.
cum
cum sqm
16.78.1 16.78.2 16.78.3 16.79
Road Work
cum cum cum cum.
Road Work
Road Work
Road Work
16.8
Road Work
cum
Road Work Road Work
16.81
Road Work
Providing and erecting 2.00 metre high temporary barricading at site as per drawing/ direction of Engineer-in-Charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in-Charge. The barricading provided shall be retained in position at site continuously i/c shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works required to execute the job. The barricading shall not be removed without prior approval of Engineer-in-Charge. (Note :- One time payment shall be made for providing barricading from start of work till completion of work i/c shifting. The barricading provided shall remain to be the property of the contractor on completion of the work). Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. Laying old cement cocrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost). Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand) including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5mm) including making drainage opening wherever required etc. complete as per direction of Engineer-in-charge. (Length of finished kerb edging shall be measured for payment). (Old kerb stones shall be supplied by the department free of cost)
metre
16.82
Road Work
metre
16.83
Road Work
sqm
16.84
Road Work
sqm
16.85
Road Work
metre
Road Work Road Work
17 17.1
Sanitary Installations Sanitary Installations
17.1.1 17.1.2 17.2
Sanitary Installations Sanitary Installations Sanitary Installations
17.0 SANITARY INSTALLATIONS Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585x480 mm with flush pipe and integrated type foot rests. Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :
each each
17.2.1 17.2.2 17.3
W.C. pan with ISI marked white solid plastic seat and lid W.C. pan with ISI marked black solid plastic seat and lid Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. W.C. pan with ISI marked black solid plastic seat and lid. Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern. Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern. Range of three urinal basins with 10litre white P.V.C. automatic flushing cistern. Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern. Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern. Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern. Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern. Range of four half stall urinals with 10 litre P.V.C. automatic flushing cistern. Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required : Single squatting plate with 5 litre P.V.C. automatic flushing cistern. Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern. Range of three squatting plates with 10 litre P.V.C. automatic flushing cistern. Range of four squatting plates with 10 litre P.V.C. automatic flushing cistern.
each each
17.3.1 17.3.2 17.4
each each
17.4.1 17.4.2 17.4.3 17.4.4
Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations
each each each each
17.5
17.5.1 17.5.2 17.5.3 17.5.4 17.6
Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations
each each each each
17.6.1 17.6.2 17.6.3 17.6.4
Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations
each each each each
17.7
Sanitary Installations
17.7.1 17.7.2 17.7.3 17.7.4 17.7.5 17.7.6 17.7.7 17.7.8 17.7.9 17.7.10 17.7.11 17.8 17.9
Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Angle back wash basin size 600x480 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Angle back wash basin size 400x400 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated levers. White Vitreous China Surgeon type wash basin of size 660x460 mm with single 15 mm C.P. brass pillar taps with elbow operated levers ISI marked. Stainless Steel AISI-304(18/8) Round basin 405x355 mm with single 15 mm C.P. brass pillar tap. Stainless Steel AISI-304(18/8) Wash basin 530x345 mm with single 15 mm C.P. brass pillar tap. Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required : White glazed fire clay kitchen sink of size 600x450x250 mm. Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets Kitchen sink with drain board and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls 510x1040 mm bowl depth 250mm. wherever required : 510x1040 mm bowl depth 225mm. 510x1040 mm bowl depth 200mm. 510x1040 mm bowl depth 178mm. Kitchen sink without drain board 610x510 mm bowl depth 200 mm. 610x460 mm bowl depth 200 mm. 470x420 mm bowl depth 178 mm. Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including painting of fittings and brackets, cutting and making good the
each each each each each each each each each each each each
17.9.1 17.10 17.10.1 17.10.1.1 17.10.1.2 17.10.1.3 17.10.1.4 17.10.2 17.10.2.1 17.10.2.2 17.10.2.3 17.11
Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations
each
17.11.1
wall wherever required : Size 450x300x150mm
each
17.11.2 17.12 17.12.1 17.13 17.13.1 17.13.2 17.14 17.14.1 17.15 17.16 17.17 17.17.1 17.17.2 17.18 17.18.1 17.18.2 17.19 17.19.1 17.19.2 17.2 17.20.1 17.20.2 17.20.3 17.21 17.22 17.23 17.24 17.25 17.25.1 17.25.2 17.25.3 17.25.4 17.25.5 17.25.6
Size 600x450x200mm Providing and fixing draining board with C.I. brackets including painting of brackets, cutting and making good the walls wherever required : White glazed fire clay draining board of size 600x450x25mm Providing and fixing white vitreous china water closet squatting pan (Indian type) Long pattern W.C. pan of size 580 mm Orissa pattern W.C. pan of size 580x440 mm Extra for using coloured W.C. pan instead of white W.C. pan Orissa pattern W.C. pan 580x440 mm Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. Extra for using coloured pedestal type W.C pan (European type) with low level cistern of same colour instead of white vitreous china W.C pan and cistern. Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet: 250x130x30 mm 250x125x25 mm Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White 10 litre capacity - coloured Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. 10 litre (full flush) capacity-white 10 litre (full flush) capacity-coloured Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid Black solid plastic seat with lid Coloured (other than black & white) solid plastic seat with lid Deleted. Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm or 340x410x265mm sizes respectively. Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 630x450mm. Flat back wash basin of size 550x400mm. Angle back wash basin of size 600x480mm. Angle back wash basin of size 400x400mm. Flat back wash basin of size 450x300mm. Surgeon type wash basin of size 660x460mm.
each
Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations
each
pair pair
Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations
each each
each each
each each each
each each each
17.26 17.26.1 17.27 17.27.1 17.27.2 17.28 17.28.1 17.28.1.1 17.28.1.2 17.28.2 17.28.2.1 17.28.2.2 17.29 17.3 17.31
Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations
Providing and fixing kitchen sink including making all connections excluding cost of fittings. White glazed fire clay sink of size 600x450x250mm. Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings: Size 450x300x150 mm. Size 600x450x200 mm. Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia 40 mm dia Flexible pipe 32 mm dia 40 mm dia Providing and fixing 100 mm sand cast Iron grating for gully trap. Providing and fixing in position 25mm diameter mosquito proof coupling of approved municipal design. Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make
each
each each
17.32
17.32.1 17.32.2 17.32.3 17.32.4 17.33
Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations
17.34 17.34.1 17.34.2 17.35 17.35.1 17.35.1.1 17.35.1.2 17.35.2 17.35.2.1 17.35.2.2 17.36 17.36.1 17.36.2
and shade with 6 mm thick hard board backing : Circular shape 450mm dia. Rectangular shape 453x357mm Oval shape 450x350mm (outer dimensions) Rectangular shape 1500x450 mm Providing and fixing 600x120x5mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. Providing and fixing toilet paper holder : C.P. brass Vitreous china Providing and fixing soil, waste and vent pipes : 100 mm dia. Sand cast iron S&S pipe as per IS: 1729. Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989. 75 mm diameter : Sand cast iron S&S pipe as per IS: 1729. Centrifugally cast (spun) iron socketed pipe as per IS: 3989. Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : 75 mm dia pipe 100 mm dia pipe
each each
metre metre
metre metre
each each
17.37
17.37.1 17.37.2 17.38 17.38.1 17.38.1.1 17.38.1.2 17.38.2 17.38.2.1 17.38.2.2 17.39 17.39.1 17.39.1.1 17.39.1.2 17.39.2 17.39.2.1 17.39.2.2 17.4 17.40.1 17.40.1.1 17.40.1.2 17.40.2 17.40.2.1 17.40.2.2 17.41 17.41.1 17.41.1.1 17.41.1.2 17.41.2 17.41.2.1 17.41.2.2 17.42 17.42.1 17.42.1.1 17.42.1.2 17.42.2 17.42.2.1 17.42.2.2 17.43
Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. : For 100 mm dia. Pipe For 75 mm dia. Pipe Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 75 mm dia Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS- 3989 Providing and fixing plain bend of required degree. 100 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS : 3989 75 mm Sand cast iron S&S as per IS -1729 Sand cast iron S&S as per IS - 3989 Providing and fixing heel rest sanitary bend 100 mm dia Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 100x100x100x100mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 75x75x75x75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 Providing and fixing double equal plain junction of required degree. 100x100x100x100 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 75x75x75x75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
each each
each each
each each
each each each each
each each each each
Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations
each each each each
each each each each
17.43.1 17.43.1.1 17.43.1.2 17.43.2 17.43.2.1 17.43.2.2 17.44 17.44.1 17.44.1.1 17.44.1.2 17.44.2 17.44.2.1 17.44.2.2 17.45 17.45.1 17.45.1.1 17.45.1.2 17.46 17.46.1 17.46.1.1 17.46.1.2 17.47 17.47.1 17.47.1.1 17.47.1.2 17.48 17.48.1 17.48.1.1 17.48.1.2 17.49 17.49.1 17.49.1.1 17.49.1.2 17.49.2 17.49.2.1 17.49.2.2 17.5 17.50.1 17.50.1.1 17.50.1.2
Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations
100x100x100 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 75x75x75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 Providing and fixing single equal plain junction of required degree : 100x100x100 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 75x75x75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 Providing and fixing double unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 100x100x75x75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 Providing and fixing double unequal plain junction of required degree: 100x100x75x75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 Providing and fixing single unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 100x100x75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 Providing and fixing single unequal plain junction of required degree : 100x100x75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 Providing and fixing double equal plain invert branch of required degree: 100x100x100x100 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS 3989 75x75x75x75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 Providing and fixing single equal plain invert branch of required degree: 100x100x100 mm Sand cast iron S&S as per iron 1729 Sand cast iron S&S as per IS - 3989 each each each each
each each each each
each each
each each
Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations
each each
each each
each each each each
each each
17.50.2 17.50.2.1 17.50.2.2 17.51 17.51.1 17.51.1.1 17.51.1.2 17.52 17.52.1 17.52.1.1 17.52.1.2 17.53 17.53.1 17.53.1.1 17.53.1.2 17.53.2 17.53.2.1 17.53.2.2 17.53.3 17.53.3.1 17.53.3.2 17.54 17.54.1 17.54.1.1 17.54.2 17.54.2.1 17.54.2.2 17.55 17.55.1 17.55.1.1 17.55.1.2 17.55.2 17.55.2.1 17.55.2.2 17.56 17.56.1 17.56.1.1 17.56.1.2 17.56.2 17.56.2.1 17.56.2.2 17.57 17.57.1 17.57.1.1
Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations Sanitary Installations
75x75x75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 Providing and fixing double unequal invert branch of required degree : 100x100x75x75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 Providing and fixing single unequal plain invert branch of required degree : 100x100x75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 Providing and fixing sand cast iron S&S off sets as per IS: 1729 76 mm off sets With 75 mm dia. pipe With 100 mm dia. pipe 114 mm off sets With 75 mm dia. pipe With 100 mm dia. Pipe 152 mm off sets With 75 mm dia. Pipe With 100 mm dia. Pipe Providing and fixing sand cast iron S&S off sets as per IS: 3989. 75 mm off sets With 75 mm dia. pipe 150 mm off sets With 75 mm dia. pipe With 100 mm dia. Pipe Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete : 100 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 Providing and fixing terminal guard: 100 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 Providing and fixing collar: 100 mm Sand cast iron S&S as per IS - 1729
each each
each each
each each
each each each
each each each each
each each each each
each
17.57.1.2 17.57.2 17.57.2.1 17.57.2.2 17.58 17.58.1 17.58.2 17.58.3 17.59 17.59.1 17.59.2 17.59.3 17.60
Sand cast iron S&S as per IS - 3989 75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS- 3989 Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter: 100 mm 75 mm 50 mm Providing and fixing M.S. stays and clamps for sand cast iron/centrifugally cast (spun) iron pipes of diameter : 100 mm 75 mm 50 mm Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet Sand cast iron S&S as per IS: 3989. Sand Cast Iron S&S as per IS: 1729. 100 mm inlet and 75 mm outlet Sand cast iron S&S as per IS - 3989 Sand Cast Iron S&S as per IS- 1729. Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size ) including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) : 100 mm dia. 75 mm dia. 50 mm dia. Painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint over a coat of zinc chromate yellow primer (of approved quality ) on the outside surface of the cistern, flush pipe, other fittings, etc. complete for new work. Re-painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint on the outside surface of the cistern, flush pipe, other fittings, etc. complete including polishing of wooden seat and lid and cleaning of W.C. pan with acid wherever necessary. Repainting C.I. cistern with synthetic enamel paint of approved colour, brand and manufacture on the outside surface of cistern, flush pipe, other fittings etc. complete. Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work : 100 mm diameter pipe 75 mm diameter pipe Repainting sand cast iron/ centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with one coat of synthetic enamel paint of any colour such as chocolate, grey or buff etc :
each each each
each each each
each each each
17.60.1 17.60.1.1 17.60.1.2 17.60.2 17.60.2.1 17.60.2.2 17.61
each each each each
17.61.1 17.61.2 17.61.3 17.62
metre metre metre each
17.63
each
17.64 17.65
each
17.65.1 17.65.2 17.66
metre metre
17.66.1 17.66.2 17.67 17.68
100 mm diameter pipe 75 mm diameter pipe Repainting bath tub of size 1700x730x430mm with enamel paint. Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40mm flush bend,
metre metre each
17.68.1 17.69 17.69.1 17.69.2 17.70 17.70.1
20mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend. Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45gms. Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60gms. Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260gms. Bottle trap 38mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 263gms. Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. weighing not less than 105 gms. Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour. Weighing not less than 88 gms. Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 450MM long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170gms. 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms. Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour. Weighing not less than 300 gms. Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes. Weighing not less than 60 gms. Providing and fixing PTMT urinal cock of approved quality and colour. 15 mm nominal bore, 80mm long. 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms.
each
each each
each
17.70.2
each
17.71
each
17.72
each
17.73 17.73.1 17.73.2 17.74 17.75 17.76 17.76.1
each each each each
each
17.77
Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5mm flat of specified shape, projecting 75mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30mm x1.6mm galvanised M.S. flats of specified shape and of total length 420mm and shall be fixed with M.S. nuts, bolts, & washers of size 25x6mm, one bolts on each side of the pipe. Total bracket length 580mm of approved shape and design (for single 100mm dia pipe). Total bracket length 810mm of approved shape and design (for two 100mm dia pipes). Total bracket length 1040mm of approved shape and design (for three 100mm dia pipes). NEW ITEMS Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. Providing & fixing white vitreous china water less urinal of size 600 x 330 x 315 mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal. Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water ( 250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.. each each each
17.77.1 17.77.2 17.77.3
17.78
each
17.79 17.80
each each
18 18.1
Sanitary Installations Water Supply Water Supply Water Supply
Water Supply PE AL PE COMPOSITE PRESSURE PIPES Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) Composite Pressure Pipes conforming to IS - 15450 U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80o C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc. with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge. Internal work Exposed on wall 1216 (16 mm OD) pipe 1620 (20 mm OD) pipe 2025 (25 mm OD) pipe 2532 (32 mm OD) pipe 3240 (40 mm OD) pipe 4050 (50 mm OD) pipe
Water Supply
18.1.1 18.1.2 18.1.3 18.1.4 18.1.5 18.1.6
Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply
18.2
Water Supply
Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) Composite Pressure Pipes conforming to IS - 15450 U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80o C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc. with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge. Concealed work including cutting chases and making good the wall etc. 1216 (16mm OD) pipe 1620 (20 mm OD) pipe 2025 (25 mm OD) pipe 2532 (32 mm OD) pipe Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) Composite Pressure Pipes conforming to IS - 15450 U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80o C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required ) e.g. elbows ,tees ,reducers, couplers & connectors etc. with trenching, refilling and testing of joints complete as per direction of the engineer in charge. External work 1216 (16 mm OD) pipe 1620 (20 mm OD ) pipe. 2025 (25 mm OD ) pipe. 2532 (32 mm OD ) pipe. 3240 (40 mm OD ) pipe. 4050 (50 mm OD ) pipe. PP- R PIPES Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR 7.4 U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply including all PP - R plain & brass threaded polypropylene random fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer in Charge. Internal work Exposed on wall PN - 16 Pipe, 16 mm OD PN - 16 Pipe, 20 mm OD PN - 16 Pipe, 25 mm OD PN - 16 Pipe, 32 mm OD PN - 16 Pipe, 40 mm OD PN - 16 Pipe, 50 mm OD Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR 7.4 U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply including all PP - R plain & brass threaded polypropylene random fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc., PN - 16 Pipe, 16 mm OD PN - 16 Pipe, 20 mm OD metre metre metre metre
Water Supply
18.2.1 18.2.2 18.2.3 18.2.4 18.3
Water Supply Water Supply Water Supply Water Supply Water Supply
Water Supply
18.3.1 18.3.2 18.3.3 18.3.4 18.3.5 18.3.6 18.4
Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply
Water Supply
18.4.1 18.4.2 18.4.3 18.4.4 18.4.5 18.4.6 18.5
Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply
18.5.0 18.5.1 18.5.2
Water Supply
Water Supply Water Supply
metre metre
18.5.3 18.5.4 18.6
Water Supply Water Supply Water Supply
PN - 16 Pipe, 25 mm OD PN - 16 Pipe, 32 mm OD Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply including all PP - R plain & brass threaded polypropylene random fittings including trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.
metre metre
18.6.1 18.6.2 18.6.3 18.6.4 18.6.5 18.6.6 18.6.7 18.6.8 18.6.9 18.6.10 18.6.11 18.7
Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply
Water Supply
18.7.1 18.7.2 18.7.3 18.7.4 18.7.5 18.7.6 18.8
External work PN - 16 Pipe, 16 mm OD (SDR 7.4) PN - 16 Pipe, 20 mm OD (SDR 7.4) PN - 16 Pipe, 25 mm OD (SDR 7.4) PN - 16 Pipe, 32 mm OD (SDR 7.4) PN - 16 Pipe, 40 mm OD (SDR 7.4) PN - 16 Pipe, 50 mm OD (SDR 7.4) PN - 16 Pipe, 63mm OD (SDR 7.4) PN - 16 Pipe, 75 mm OD (SDR 7.4) PN - 16 Pipe, 90 mm OD (SDR 7.4) PN - 10 Pipe, 110 mm OD (SDR - 11) PN - 10 Pipe, 160 mm OD (SDR - 11) C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 15 mm nominal outer dia .Pipes. 20 mm nominal outer dia .Pipes. 25 mm nominal outer dia .Pipes. 32 mm nominal outer dia .Pipes. 40 mm nominal outer dia .Pipes. 50 mm nominal outer dia .Pipes. Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc. 15 mm nominal outer dia .Pipes. 20 mm nominal outer dia .Pipes. 25 mm nominal outer dia .Pipes. 32 mm nominal outer dia .Pipes.
metre metre metre metre metre metre metre metre metre metre metre
Water Supply
18.8.1 18.8.2 18.8.3 18.8.4
18.9
Water Supply
Water Supply
18.9.1 18.9.2 18.9.3 18.9.4 18.9.5 18.9.6 18.9.7 18.9.8 18.9.9 18.9.10 18.10 18.10a 18.10.1 18.10.2 18.10.3 18.10.4 18.10.5 18.10.6 18.11
Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. External work 15 mm nominal outer dia .Pipes. 20 mm nominal outer dia .Pipes. 25 mm nominal outer dia .Pipes. 32 mm nominal outer dia .Pipes. 40 mm nominal outer dia .Pipes. 50 mm nominal outer dia .Pipes. 62.50 mm nominal inner dia Pipes. 75 mm nominal inner dia .Pipes. 100mm nominal inner dia .Pipes. 150 mm nominal inner dia .Pipes. Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work Exposed on wall. 15 mm dia. nominal bore 20 mm dia. nominal bore 25 mm dia. nominal bore 32 mm dia. nominal bore 40 mm dia. nominal bore 50 mm dia. nominal bore Providing and fixing G.I. Pipes complete with G.I. fittings and clamps i/c making good the walls etc. concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall 15 mm dia nominal bore 20 mm dia nominal bore Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 15 mm dia. nominal bore 20 mm dia. nominal bore 25 mm dia. nominal bore 32 mm dia. nominal bore 40 mm dia. nominal bore 50 mm dia. nominal bore 65 mm dia. nominal bore 80 mm dia. nominal bore Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore 50 to 80 mm nominal bore Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately). BRASS FITTINGS Providing and fixing brass bib cock of approved quality : 15 mm nominal bore
metre metre metre metre metre metre metre metre metre metre
18.11.1 18.11.2 18.12 18.12a 18.12.1 18.12.2 18.12.3 18.12.4 18.12.5 18.12.6 18.12.7 18.12.8 18.13 18.13.1 18.13.2 18.14
metre metre
metre metre metre metre metre metre metre metre
each each each
Water Supply
18.15 18.15.1
each
18.15.2 18.16 18.16.1 18.16.2 18.17 18.17.1 18.17.2 18.17.3 18.17.4 18.17.5 18.17.6 18.18 18.18.1 18.18.2 18.18.3 18.19 18.19.1 18.19.1.1 18.19.1.2 18.19.2 18.19.2.1 18.19.2.2 18.19.3 18.19.3.1 18.19.3.2 18.19.4 18.19.4.1 18.19.4.2 18.19.5 18.19.5.1 18.19.5.2 18.19.6 18.19.6.1 18.19.6.2 18.20 18.20.1 18.20.2 18.20.3 18.21 18.21.1 18.21.1.1 18.21.1.2 18.21.2 18.21.2.1 18.21.2.2 18.22
Water Supply Water Supply Water Supply Water Supply
Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply
20 mm nominal bore Providing and fixing brass stop cock of approved quality : 15 mm nominal bore 20 mm nominal bore Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore 32 mm nominal bore. 40 mm nominal bore 50 mm nominal bore 65 mm nominal bore 80 mm nominal bore Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore 20 mm nominal bore 25 mm nominal bore Providing and fixing gun metal non- return valve of approved quality (screwed end) : 25 mm nominal bore Horizontal Vertical 32 mm nominal bore Horizontal Vertical 40 mm nominal bore Horizontal Vertical 50 mm nominal bore Horizontal Vertical 65 mm nominal bore Horizontal Vertical 80 mm nominal bore Horizontal Vertical Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 15 mm nominal bore 20 mm nominal bore 25 mm nominal bore Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length 15 mm nominal bore 20 mm nominal bore 45 cm length 15 mm nominal bore 20 mm nominal bore Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
each each each
each each each
each each each
each each each each
18.22.1 18.22.2 18.23
100 mm diameter 150 mm diameter C.I/ DUCTILE IRON PIPES & SPECIALS Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipe) Laying in position S&S or flanged C.I. special such as tees, bends, collars, tapers and caps etc.(excluding cost of specials). Providing and laying S&S C.I. standard specials such as tees, bends, collars, tapers, caps etc. (Heavy class) : Up to 300 mm dia. Over 300 mm dia. Providing and laying flanged C.I. standard specials such as tees, bends, collars, tapers, caps etc., suitable for flanged jointing as per IS : 1538 : Up to 300 mm dia. Over 300 mm dia. Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 : 100 mm dia. pipe 125 mm dia. pipe 150 mm dia. pipe 200 mm dia. pipe 250 mm dia. pipe 300 mm dia. pipe 350 mm dia. pipe 400 mm dia. pipe 450 mm dia. pipe 500 mm dia. pipe 600 mm dia. pipe Providing lead caulked joints to spun iron or C.I. pipes and specials including testing of joints but excluding the cost of pig lead : 100 mm diameter pipe 125 mm diameter pipe 150 mm diameter pipe 200 mm diameter pipe 250 mm diameter pipe 300 mm diameter pipe 350 mm diameter pipe 400 mm diameter pipe 450 mm diameter pipe 500 mm diameter pipe 600 mm diameter pipe Supplying pig lead at site of work. Providing flanged joints to double flanged C.I./ D.I. pipes and specials including testing of joints : 80 mm diameter pipe 100 mm diameter pipe 125 mm diameter pipe 150 mm diameter pipe 200 mm diameter pipe 250 mm diameter pipe
each each quintal
18.24 18.25 18.25.1 18.25.2 18.26 18.26.1 18.26.2 18.27 18.27.1 18.27.2 18.27.3 18.27.4 18.27.5 18.27.6 18.27.7 18.27.8 18.27.9 18.27.10 18.27.11 18.28 18.28.1 18.28.2 18.28.3 18.28.4 18.28.5 18.28.6 18.28.7 18.28.8 18.28.9 18.28.10 18.28.11 18.29 18.30 18.30.1 18.30.2 18.30.3 18.30.4 18.30.5 18.30.6
Water Supply
quintal
Water Supply
quintal quintal
quintal quintal
Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply
metre metre metre metre metre metre metre metre metre metre metre
Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply
each each each each each each each each each each each quintal
18.30.7 18.30.8 18.30.9 18.30.10 18.30.11 18.30.12 18.31 18.31.1 18.31.1.1 18.31.1.2 18.31.2 18.31.2.1 18.31.2.2 18.31.3 18.31.3.1 18.31.3.2 18.31.4 18.31.4.1 18.31.4.2 18.31.5 18.31.5.1 18.31.5.2 18.31.6 18.31.6.1 18.31.6.2 18.32
Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply
300 mm diameter pipe 350 mm diameter pipe 400 mm diameter pipe 450 mm diameter pipe 500 mm diameter pipe 600 mm diameter pipe C.I. SLUICE VALVES/ FIRE HYDRANTS & FIXTURES Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 100 mm diameter Class I Class II 125 mm diameter Class I Class II 150 mm diameter Class I Class II 200 mm diameter Class I Class II 250 mm diameter Class I Class II 300 mm diameter Class I Class II Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement :5 fine sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5. Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5.
18.32.1 18.33
Water Supply
each
Water Supply
18.33.1
Water Supply
each
18.34
Water Supply
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5. Constructing masonry Chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5. Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. surface box 350x350 mm. top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5. Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5. Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : 15 mm diameter pipe. 20 mm diameter pipe. 25 mm diameter pipe. 32 mm diameter pipe. 40 mm diameter pipe. each each
18.34.1 18.35
Water Supply
Water Supply
Water Supply
Water Supply
18.35.1 18.36
Water Supply
Water Supply
18.36.1 18.37
Water Supply
each
Water Supply
18.37.1 18.38 18.38.1 18.38.2 18.38.3 18.38.4 18.38.5
Water Supply
each
Water Supply
18.38.6 18.39 18.39.1 18.39.2 18.39.3 18.39.4 18.39.5 18.39.6 18.40 18.40.1 18.40.2 18.40.3
50 mm diameter pipe. Repainting G.I. pipes and fittings with synthetic enamel white paint with one coat of approved quality : 15 mm diameter pipe. 20 mm diameter pipe. 25 mm diameter pipe 32 mm diameter pipe 40 mm diameter pipe 50 mm diameter pipe Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 15 mm diameter pipe 20 mm diameter pipe 25 mm diameter pipe
metre
metre metre metre
18.40.4 18.40.5 18.40.6 18.40.7 18.40.8 18.41 18.41.1 18.41.2 18.41.3 18.41.4
Water Supply
32 mm diameter pipe 40 mm diameter pipe 50 mm diameter pipe 65 mm diameter pipe 80 mm diameter pipe Providing and filling sand of grading zone V or coarser grade all-round the G.I. pipes in external work. 15 mm diameter pipe 20 mm diameter pipe 25 mm diameter pipe 32 mm diameter pipe
18.41.5 18.41.6 18.41.7 18.41.8 18.41.9 18.41.10 18.42
18.42.1 18.42.2 18.42.3
40 mm diameter pipe 50 mm diameter pipe 65 mm diameter pipe 80 mm diameter pipe 100 mm diameter pipe 150 mm diameter pipe Boring with 100 mm diameter casing pipe for hand pump / tubewell, in all soils except ordinary hard rocks requiring blasting, including removing the casing pipe after the hand pump / tube well is lowered and tested : Up to 6 metres depth. Beyond 6 m and up to 12 m depth. Beyond 12 m and up to 18 m depth.
metre metre metre
18.43 18.44 18.45
Water Supply
Water Supply
Providing and placing in position filters of 40 mm diameter G.I. pipe with brass strainer of approved quality. Providing and fixing to filter and lowering to proper levels 40 mm G.I. pipe for tube well including cleaning and priming the tube well. Providing and placing in position hand pump of approved quality for 40 mm diameter G.I. pipe complete with all accessories. Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 15 mm nominal bore 20 mm nominal bore 25 mm nominal bore 32 mm nominal 40 mm nominal bore 50mm nominal bore 65mm nominal bore 80 mm nominal bore Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 15 mm nominal bore. 20 mm nominal bore. 25 mm nominal bore. 32 mm nominal bore. 40 mm nominal bore. 50 mm nominal bore. 65 mm nominal bore. 80 mm nominal bore. Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank C.P.BRASS FITTINGS. Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore. Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore. Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore. Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore 15mm nominal bore PTMT FITTINGS Providing and fixing PTMT bib cock of approved quality and colour. 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. 15 mm nominal bore, 122mm long. Weighing not less than 99 gms.
metre metre each
18.46 18.46.1 18.46.2 18.46.3 18.46.4 18.46.5 18.46.6 18.46.7 18.46.8 18.47
Water Supply
Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply
18.47.1 18.47.2 18.47.3 18.47.4 18.47.5 18.47.6 18.47.7 18.47.8 18.48
Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply
each each each each each each each each per litre
Water Supply
18.49 18.49.1 18.50 18.50.1 18.51 18.51.1 18.52 18.52.1 18.53 18.53.1 18.54 18.54.1 18.54.2
Water Supply
each
each
each
each
each
each each
18.54.3 18.54.4 18.55 18.55.1 18.55.2 18.55.3 18.56 18.56.1 18.56.2 18.57 18.57.1 18.57.2 18.58 18.58.1 18.58.1.1 18.58.1.2 18.58.2 18.58.2.1
Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply
15 mm nominal bore, 165mm long. Weighing not less than 110 gms. 15mm nominal bore, 90mm long. Weighing not less than 93 gms. Providing and fixing PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86mm long. Weighing not less than 88 gms. 20mm nominal bore, 89mm long. Weighing not less than 88 gms. Concealed stop cock, 15mm nominal bore, 108mm long. Weighing not less than 108 gms. Providing and fixing PTMT pillar cock of approved quality and colour . 15mm nominal bore, 107mm long. Weighing not less than 110 gms. 15mm nominal bore, 125mm long foam flow. Weighing not less than 120 gms. Providing and fixing PTMT, push cock of approved quality and colour. 15 mm nominal bore, 98mm long. Weighing not less than 75 gms. 15 mm nominal bore, 80mm long. Weighing not less than 46 gms. Providing and fixing PTMT grating of approved quality and colour. Circular type. 100 mm nominal dia. 125 mm nominal dia with 25 mm waste hole. Rectangular type with openable circular lid. 150 mm nominal size square 100 mm diameter of the inner hinged round grating. AIR VALVE & WATER METER (BULK TYPE) Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) :
each each
each each
each each
each
Water Supply
18.59
Water Supply
18.59.1 18.59.2 18.59.3 18.60
18.60.1 18.60.2 18.60.3 18.60.4 18.61 18.61.1 18.61.2 18.61.3 18.61.4
50 mm dia 80 mm dia 100 mm dia Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) : 80 mm dia nominal bore 100 mm dia nominal bore 150 mm dia nominal bore 200 mm dia nominal bore Providing and fixing C.I. dirt box strainer for bulk type water meter with nuts, bolts, rubber insertions etc. complete conforming to IS : 2373 : 80 mm dia 100 mm dia. 150 mm dia 200 mm dia
each each each
each each each each
each each each each
18.62 18.62.1 18.62.2 18.62.3 18.62.4 18.62.5 18.63 18.64 18.65 18.66 18.66.1 18.66.2 18.67 18.67.1 18.67.2 18.68 18.68.1 18.68.2 18.69 18.69.1 18.69.2 18.70 18.70.1 18.70.2 18.70.3 18.70.4 18.70.5 18.70.6 18.70.7 18.70.8 18.70.9 18.70.10 18.70.11 18.70.12 18.70.13 18.70.14 18.70.15
Water Supply
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 15 mm nominal bore, 105 mm long. Weighing not less than 138 gms. 20 mm nominal bore, 120 mm long. Weighing not less than 198 gms. 25 mm nominal bore, 152mm long. Weighing not less than 440 gms. 40mm nominal bore, 206mm long. Weighing not less than 690 gms. 50mm nominal bore, 242mm long. Weighing not less than 1240 gms. Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. Providing and fixing PTMT swivelling shower, 15mm nominal bore. Weighing not less than 40gms. Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms. Providing and laying S&S C.I. Standard specials such as tees, bends, collars tapers and caps etc, suitable for flanged jointing as per IS : 1538 : Up to 300 mm dia Above 300 mm dia Providing and laying S&S C.I. Standard specials suitable for mechanical jointing as per IS : 13382 Up to 300 mm dia Above 300 mm dia Providing and laying D.I. specials of class K-12 suitable for push-on jointing as per IS : 9523 Up to 600 mm dia Above 600 mm dia Providing and laying D.I. Specials of Class K - 12 suitable for mechanical jointing as per IS : 9523 : Up to 600 mm dia Above 600 mm dia Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket : 100 mm dia pipes 150 mm dia pipes 200 mm dia pipes 250 mm dia pipes 300 mm dia pipes 350 mm dia pipes 400 mm dia pipes 450 mm dia pipes 500 mm dia pipes 600 mm dia pipes 650 mm dia pipes 700 mm dia pipes 800 mm di a pipes 900 mm dia pipes 1000 mm dia pipes
Water Supply
Water Supply
Water Supply
quintal quintal
quintal quintal
quintal quintal
quintal quintal
Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply
joint joint joint joint joint joint joint joint joint joint joint joint joint joint joint
18.71 18.71.1 18.71.2 18.71.3 18.71.4 18.71.5 18.71.6 18.71.7 18.71.8 18.71.9 18.71.10 18.72 18.72.1 18.72.2 18.72.3 18.72.4 18.72.5 18.72.6 18.72.7 18.72.8 18.72.9 18.72.10 18.72.11 18.72.12 18.72.13 18.72.14 18.72.15 18.72.16 18.72.17 18.72.18 18.72.19 18.72.20 18.72.21 18.72.22 18.72.23 18.72.24 18.72.25 18.72.26 18.72.27 18.72.28 18.72.29 18.73 18.73.1 18.73.2 18.73.3 18.73.4 18.73.5 18.73.6 18.73.7
Water Supply
Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply
Providing and laying Double Flanged (screwed/ welded) Centrifugally (Spun) Cast Iron, Class B (IS : 1536) : 100 mm dia C.I. Double Flanged Pipe 150 mm dia C.I. Double Flanged Pipe 200 mm dia C.I. Double Flanged Pipe 250 mm dia C.I. Double Flanged Pipe 300 mm dia C.I. Double Flanged Pipe 350 mm dia C.I. Double Flanged Pipe 400 mm dia C.I. Double Flanged Pipe 450 mm dia C.I. Double Flanged Pipe 500 mm dia C.I. Double Flanged Pipe 600 mm dia C.I. Double Flanged Pipe Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 : 100 mm dia Ductile Iron Class K-7 pipes 150 mm dia Ductile Iron Class K-7 pipes 200 mm dia Ductile Iron Class K-7 pipes 250 mm dia Ductile Iron Class K-7 pipes 300 mm dia Ductile Iron Class K-7 pipes 350 mm dia Ductile Iron Class K-7 pipes 400 mm dia Ductile Iron Class K-7 pipes 450 mm dia Ductile Iron Class K-7 pipes 500 mm dia Ductile Iron Class K-7 pipes 600 mm dia Ductile Iron Class K-7 pipes 700 mm dia Ductile Iron Class K-7 pipes 800 mm dia Ductile Iron Class K-7 pipes 900 mm dia Ductile Iron Class K-7 pipes 1000 mm dia Ductile Iron Class K-7 pipes 100 mm dia Ductile Iron Class K-9 pipes 150 mm dia Ductile Iron Class K-9 pipes 200 mm dia Ductile Iron Class K-9 pipes 250 mm dia Ductile Iron Class K-9 pipes 300 mm dia Ductile Iron Class K-9 pipes 350 mm dia Ductile Iron Class K-9 pipes 400 mm dia Ductile Iron Class K-9 pipes 450 mm dia Ductile Iron Class K-9 pipes 500 mm dia Ductile Iron Class K-9 pipes 600 mm dia Ductile Iron Class K-9 pipes 700 mm dia Ductile Iron Class K-9 pipes 750 mm dia Ductile Iron Class K-9 pipes 800 mm dia Ductile Iron Class K-9 pipes 900 mm dia Ductile Iron Class K-9 pipes 1000 mm dia Ductile Iron Class K-9 pipes Providing and laying Double Flanged (Screwed/ Welded) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS : 8329 : 100 mm dia Ductile Iron Double Flanged 150 mm dia Ductile Iron Double Flanged 200 mm dia Ductile Iron Double Flanged 250 mm dia Ductile Iron Double Flanged 300 mm dia Ductile Iron Double Flanged 350 mm dia Ductile Iron Double Flanged 400 mm dia Ductile Iron Double Flanged
metre metre metre metre metre metre metre metre metre metre
metre metre metre metre metre metre metre metre metre metre metre metre metre metre metre metre metre metre metre metre metre metre metre metre metre metre metre metre metre
metre metre metre metre metre metre metre
18.73.8 18.73.9 18.73.10 18.73.11 18.74 18.74.1 18.74.2 18.75 18.75.1 18.75.2 18.75.3 18.76
450 mm dia Ductile Iron Double Flanged 500 mm dia Ductile Iron Double Flanged 600 mm dia Ductile Iron Double Flanged 700 mm dia Ductile Iron Double Flanged Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 30cm length. 15 mm nominal bore with 45 cm length. Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 15 mm nominal bore. Weighing not less than 32 gms. 20mm nominal bore. Weighing not less than 40gms. 25mm nominal bore. Weighing not less than 62 gms. Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks. Cutting holes up to 15x15cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof. Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 coarse sand 6 graded stone aggregate 20 mm nominal size) including disposal of malba. Disinfecting C.I. water mains by flushing with water containing bleaching powder at 0.5 gms per litre of water and cleaning the same with fresh water, operation to be repeated three times including getting the sample of water from the disinfected main tested in the municipal laboratory. 80 mm diameter C.I. pipe 100 mm diameter C.I. pipe 125 mm diameter C.I. pipe 150 mm diameter C.I. pipe 200 mm diameter C.I. pipe 250 mm diameter C.I. pipe 300 mm diameter C.I. pipe 350 mm diameter C.I. pipe 400 mm diameter C.I. pipe 450 mm diameter C.I. pipe 500 mm diameter C.I. pipe 600 mm diameter C.I. pipe Extra for every operation of disinfecting the C.I. main by flushing with water containing bleaching powder at 0.5 gms per litre of water and cleaning the same with fresh water, including getting the samples of water tested in the municipal laboratory: 80 mm diameter C.I. pipe 100 mm diameter C.I. pipe 125 mm diameter C.I. pipe 150 mm diameter C.I. pipe
each each
each each each
18.76.1 18.77
each each
18.78 18.79
Water Supply
metre metre
Water Supply
18.80
Water Supply
18.80.1 18.80.2 18.80.3 18.80.4 18.80.5 18.80.6 18.80.7 18.80.8 18.80.9 18.80.10 18.80.11 18.80.12 18.81
Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply
100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre
18.81.1 18.81.2 18.81.3 18.81.4
100 metre 100 metre 100 metre 100 metre
18.81.5 18.81.6 18.81.7 18.81.8 18.81.9
200 mm diameter C.I. pipe 250 mm diameter C.I. pipe 300 mm diameter C.I. pipe 350 mm diameter C.I. pipe 400 mm diameter C.I. pipe
100 metre 100 metre 100 metre 100 metre 100 metre
18.81.10 18.81.11 18.81.12 18.82
18.82.1 18.82.2 18.82.3 18.82.4 18.82.5 18.82.6 18.82.7 18.82.8 18.82.9 18.82.10 18.82.11 18.82.12 18.83 18.83.1 18.83.2 18.83.3 18.83.4 18.83.5 18.83.6 18.83.7 18.83.8 18.83.9 18.83.10 18.83.11 18.83.12 18.84 18.84.1 19
Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply Water Supply
450 mm diameter C.I. pipe 500 mm diameter C.I. pipe 600 mm diameter C.I. pipe Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes at site lead up to 50 metre: 80 mm diameter C.I. pipe 100 mm diameter C.I. pipe 125 mm diameter C.I. pipe 150 mm diameter C.I. pipe 200 mm diameter C.I. pipe 250 mm diameter C.I. pipe 300 mm diameter C.I. pipe 350 mm diameter C.I. pipe 400 mm diameter C.I. pipe 450 mm diameter C.I. pipe 500 mm diameter C.I. pipe 600 mm diameter C.I. pipe Labour for cutting C.I. pipe with steel saw. 80 mm diameter C.I. pipe 100 mm diameter C.I. pipe 125 mm diameter C.I. pipe 150 mm diameter C.I. pipe 200 mm diameter C.I. pipe 250 mm diameter C.I. pipe 300 mm diameter C.I. pipe 350 mm diameter C.I. pipe 400 mm diameter C.I. pipe 450 mm diameter C.I. pipe 500 mm diameter C.I. pipe
100 metre 100 metre 100 metre
metre metre metre metre metre metre metre metre metre metre metre metre Each cut Each cut Each cut Each cut Each cut Each cut Each cut Each cut Each cut Each cut Each cut
Water Supply DRAINAGE
600 mm diameter C.I. pipe Each cut NEW ITEMS Providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology. 15 mm nominal bore. each 19.0 DRAINAGE
DRAINAGE
DRAINAGE
19.1 19.1.1 19.1.2 19.1.3 19.1.4 19.1.5 19.2 19.2.1 19.2.2 19.2.3 19.2.4 19.3
DRAINAGE
DRAINAGE DRAINAGE DRAINAGE DRAINAGE DRAINAGE DRAINAGE
DRAINAGE DRAINAGE DRAINAGE DRAINAGE DRAINAGE
NOTE : - The rates given for all the items under sub-head Drainage are applicable to work executed in soils above subsoil water level. Extra allowance has to be made for work under subsoil water level. STONE WARE PIPES AND FITTINGS Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100 mm diameter 150 mm diameter 200 mm diameter 250 mm diameter 300 mm diameter Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design: 100 mm diameter S.W. pipe 150 mm diameter S.W. pipe 200 mm diameter S.W. pipe 250 mm diameter S.W. pipe Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 100 mm diameter S.W. pipe 150 mm diameter S.W. pipe 200 mm diameter S.W. pipe 250 mm diameter S.W. pipe 300 mm diameter S.W. pipe Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 With Sewer bricks conforming to IS : 4885 150 x 100 mm size P type. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 With sewer bricks conforming to IS : 4885 180x150 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 With Sewer bricks conforming to IS : 4885 Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps: 100 mm diameter 150 mm diameter 200 mm diameter 250 mm diameter 300 mm diameter
19.3.1 19.3.2 19.3.3 19.3.4 19.3.5 19.4
DRAINAGE DRAINAGE DRAINAGE DRAINAGE DRAINAGE DRAINAGE
19.4.1 19.4.1.1 19.4.1.2 19.4.2 19.4.2.1 19.4.2.2 19.4.3 19.4.3.1 19.4.3.2 19.5 19.5.1 19.5.2 19.5.3 19.5.4 19.5.5
DRAINAGE DRAINAGE
each each
DRAINAGE DRAINAGE DRAINAGE DRAINAGE
each each each each
DRAINAGE DRAINAGE DRAINAGE
DRAINAGE DRAINAGE
19.5.6 19.5.7 19.5.8 19.6
350 mm diameter 400 mm diameter 450 mm diameter Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 100 mm dia. R.C.C. pipe 150 mm dia. R.C.C. pipe 250 mm dia. R.C.C. pipe 300 mm dia. R.C.C. pipe 450 mm dia. R.C.C. pipe 500 mm dia. R.C.C. pipe 600 mm dia. R.C.C. pipe 700 mm dia. R.C.C. pipe 800 mm dia. R.C.C. pipe 900 mm dia. R.C.C. pipe 1000 mm dia. R.C.C. pipe 1100 mm dia. R.C.C. pipe 1200 mm dia. R.C.C. pipe Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design :
metre metre metre
19.6.1 19.6.2 19.6.3 19.6.4 19.6.5 19.6.6 19.6.7 19.6.8 19.6.9 19.6.10 19.6.11 19.6.12 19.6.13 19.7
DRAINAGE DRAINAGE DRAINAGE DRAINAGE DRAINAGE DRAINAGE DRAINAGE DRAINAGE DRAINAGE DRAINAGE DRAINAGE DRAINAGE DRAINAGE DRAINAGE
metre metre metre metre metre metre metre metre metre metre metre metre metre
DRAINAGE DRAINAGE
19.7.1
DRAINAGE
19.7.1.1 19.7.1.2 19.7.2
DRAINAGE
DRAINAGE DRAINAGE
19.7.2.1 19.7.2.2 19.7.3
DRAINAGE
DRAINAGE DRAINAGE
19.7.3.1 19.7.3.2 19.8 19.8.1
DRAINAGE
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 With Sewer bricks conforming to IS : 4885 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 With Sewer bricks conforming to IS : 4885 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 With Sewer bricks conforming to IS : 4885 Extra for depth for manholes Size 90x80 cm
each each
each each
each each
19.8.1.1 19.8.1.2 19.8.2 19.8.2.1 19.8.2.2 19.9
DRAINAGE
DRAINAGE DRAINAGE
With common burnt clay F.P.S. (non modular) bricks of class metre designation 7.5 With Sewer bricks conforming to IS : 4885 metre Size 120x90 cm With common burnt clay F.P.S. (non modular) bricks of class metre designation 7.5 With Sewer bricks conforming to IS : 4885 metre Constructing brick masonry circular type manhole 0.91m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand), in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 With Sewer bricks conforming to IS : 4885 Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91m to 1.67m With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 With Sewer bricks conforming IS : 4885 Constructing brick masonry circular manhole 1.22m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 With Sewer bricks conforming IS : 4885 Extra depth for circular type manhole 1.22m internal dia (at bottom) beyond 1.68 m to 2.29 m : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each each each each
DRAINAGE
DRAINAGE
19.9.1
DRAINAGE
19.9.1.1 19.9.1.2 19.10 19.10.1 19.10.2 19.11
DRAINAGE
DRAINAGE DRAINAGE
DRAINAGE
metre metre
DRAINAGE DRAINAGE
19.11.1
DRAINAGE
19.11.1.1 19.11.1.2 19.12 19.12.1
DRAINAGE
DRAINAGE DRAINAGE
DRAINAGE
metre
DRAINAGE
19.12.2 19.13
DRAINAGE DRAINAGE
With Sewer bricks conforming IS : 4885 Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 2.30m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 With Sewer bricks conforming IS : 4885 Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 With Sewer bricks conforming IS : 4885 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : With 20x20 mm square bar With 20 mm diameter round bar Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
metre
19.13.1
DRAINAGE
19.13.1.1 19.13.1.2 19.14 19.14.1 19.14.2 19.15
DRAINAGE
each each
DRAINAGE DRAINAGE
DRAINAGE
metre metre
DRAINAGE DRAINAGE
19.15.1 19.15.2 19.16
DRAINAGE
each each each
DRAINAGE DRAINAGE
DRAINAGE
19.17
DRAINAGE
19.17.1 19.17.2 19.18
Replacement of M.S. foot rests in manholes including dismantling concrete blocks and fixing with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) : With 20x20 mm square bar With 20 mm diameter round bar Supplying and fixing C.I. cover without frame for manholes :
each each
19.18.1 19.18.2 19.18.3 19.19 19.19.1 19.19.1.1 19.19.1.2 19.19.1.3 19.19.2 19.19.2.1 19.19.2.2 19.19.3 19.19.3.1 19.19.4 19.19.4.1 19.20 19.21
DRAINAGE
DRAINAGE
DRAINAGE
DRAINAGE
DRAINAGE DRAINAGE DRAINAGE DRAINAGE DRAINAGE DRAINAGE DRAINAGE
455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg. 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg. 560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg. Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality L D- 2.5 Rectangular shape 600x450mm internal dimensions Square shape 450mm internal dimensions Circular shape 450mm internal diameter M D - 10 Square shape 450mm internal dimension Circular shape 500mm internal diameter H D - 20 Circular shape 560 mm internal diameter EHD - 35 Circular shape 560 mm internal dia. Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5kg. Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 230 mm diameter For pipes 250 to 300 mm diameter For pipes 350 to 450 mm diameter Providing sand cast iron drop connection externally for 60 cm drop from branch sewer line to main sewer manhole including inspection and cleaning eye with chain and lid, sand cast iron drop pipe and bend encased all-round with cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) with all centering and shuttering required, cutting holes in walls and making good with brick work in cement mortar 1:4 (1 cement : 4 coarse sand) plastered with cement mortar 1:3 (1 cement : 3 coarse sand) on inside of the manhole wall, lead caulked joints between sand cast iron pipes and fittings, stiff cement mortar 1:1 (1 cement : 1 fine sand) joints between sand cast iron tee and S.W. pipe, making required channels complete as per standard design and specifications : 100 mm dia. sand cast iron drop connection 150 mm dia. sand cast iron drop connection Extra for depths beyond 60 cm of sand cast iron drop connection complete : For 100 mm dia. sand cast iron drop connection For 150 mm dia. sand cast iron drop connection
each each each
each each each
DRAINAGE
19.21.1 19.21.2 19.21.3 19.22
DRAINAGE DRAINAGE
each each each
DRAINAGE DRAINAGE
DRAINAGE
DRAINAGE
19.22.1 19.22.2 19.23 19.23.1 19.23.2
each each
DRAINAGE DRAINAGE
metre metre
19.24 19.24.1 19.24.2 19.24.3 19.24.4 19.25 19.25.1 19.25.2 19.25.3 19.25.4 19.26 19.26.1 19.26.2 19.26.3 19.26.4
DRAINAGE
DRAINAGE DRAINAGE DRAINAGE DRAINAGE DRAINAGE DRAINAGE DRAINAGE DRAINAGE
DRAINAGE
DRAINAGE
DRAINAGE
DRAINAGE
DRAINAGE
Dismantling of manhole including R.C.C. top slab, C.I. cover with frame including stacking of useful materials near the site and disposal of unserviceable materials into municipal dumps within 50 m lead : Rectangular manhole 90x80 cm and 45 cm deep Rectangular manhole 120x90 cm and 90 cm deep Rectangular arch type manhole 140x90cm and 2.45m deep Circular manhole 122 cm diameter and 1.68 m deep Extra for depth of manholes dismantled: Rectangular manhole 90x80 cm and beyond 45 cm depth Rectangular manhole 120x90 cm and beyond 90 cm depth Rectangular arch type manhole 140x90 cm and beyond 2.45m depth (up to 4.25 m depth). Circular manhole 122 cm diameter and beyond 1.68 m depth (up to 2.29 m depth) Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Raising depth of manhole to be paid separately) : Rectangular manhole 90x80 cm with rectangular cover 600x450 mm of grade LD - 2.5 Rectangular manhole 120x90 cm with circular cover 500 mm dia of grade MD - 10 Rectangular manhole 120x90 cm with circular cover 560 mm dia of grade HD - 20 Circular manhole 140 cm dia with circular cover 600 mm dia of grade EHD - 35 Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand ) with pre-cast R.C.C. vertical grating complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Constructing brick masonry road gully chamber 110x50x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame and vertical grating complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : Inside dimensions 455x610 mm and 45 cm deep for single pipe line :
each each each each metre metre metre metre
each each each each
19.27
DRAINAGE
19.27.1 19.28 19.28.1 19.29
DRAINAGE
each
DRAINAGE
DRAINAGE
each
DRAINAGE
19.29.1 19.30
DRAINAGE
each
DRAINAGE
19.30.1
DRAINAGE
19.30.1.1 19.30.2 19.30.2.1
DRAINAGE
DRAINAGE
DRAINAGE
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
each
each
19.30.3 19.30.3.1 19.31 19.31.1 19.31.1.1 19.31.2 19.31.2.1 19.31.3 19.31.3.1 19.32 19.32.1 19.33 19.34 19.34.1 19.34.2
DRAINAGE
DRAINAGE
Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Extra for depth beyond 45 cm of brick masonry chamber : For 455x610 mm size With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 For 500x700 mm size With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 For 600x850 mm size With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100 mm dia 150 mm dia
each
metre
DRAINAGE DRAINAGE
metre
DRAINAGE DRAINAGE
metre
DRAINAGE
DRAINAGE
each each
DRAINAGE
DRAINAGE
DRAINAGE DRAINAGE
each each
DRAINAGE
20 20.1
Pile Work Pile Work
20.0 PILE WORK Providing, driving and installing driven cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of shoe and the length of pile to be embedded in the pile cap etc. all complete. (Length of pile for payment shall be measured from top of shoe to the bottom of pile cap) : 400 mm dia piles 450 mm dia piles 500 mm dia piles 550 mm dia piles 750 mm dia piles. 1000 mm dia piles. 1200 mm dia piles. metre metre metre metre metre metre metre
20.1.1 20.1.2 20.1.3 20.1.4 20.1.5 20.1.6 20.1.7
Pile Work Pile Work Pile Work Pile Work Pile Work Pile Work Pile Work
20.1.8 20.2
Pile Work Pile Work
1500 mm dia piles. Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap). 300 mm dia piles 400 mm dia piles 450 mm dia piles 500 mm dia. piles 600 mm dia piles 750 mm dia piles. 1000 mm dia piles. 1200 mm dia piles. 1500 mm dia piles. Boring, Providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) : 300 mm dia piles. 400 mm dia piles 450 mm dia piles 550 mm dia piles Extra over item No. 23.3 for providing additional bulb in under reamed piles, under specified dia meter (Only the quantity of extra bulbs are to be paid). 300mm dia piles. 400mm dia piles. 450 mm dia piles. 550 mm dia piles. Providing, driving and installing driven Pre-cast reinforced cement concrete piles of specified diameter and length below the pile cap in M25 cement concrete to carry safe working load not less than specified. With a central through preformed hole with M.S. black pipe of dia, 40mm for grouting with cement sand grouting of mix 1:2 (1 cement : 2 coarse sand) under sufficient positive pressure to ensure complete filling including centring, shuttering, driving and removing the steel casing pipe and lifting casing etc. complete but excluding the cost of steel reinforcement. (Length of pile for payment shall be measured from top of the shoe to the bottom of pile cap). 400 mm dia piles. 450 mm dia piles. 500 mm dia piles. 550 mm dia piles. 750 mm dia piles. 1000 mm dia piles.
metre
20.2.1 20.2.2 20.2.3 20.2.4 20.2.5 20.2.6 20.2.7 20.2.8 20.2.9 20.3
Pile Work Pile Work Pile Work Pile Work Pile Work Pile Work Pile Work Pile Work Pile Work Pile Work
metre metre metre metre metre metre metre metre metre
Pile Work Pile Work
20.3.1 20.3.2 20.3.3 20.3.4 20.4 20.4.1 20.4.2 20.4.3 20.4.4 20.5
Pile Work Pile Work Pile Work Pile Work Pile Work
Pile Work Pile Work Pile Work Pile Work Pile Work
each each each each
20.5.1 20.5.2 20.5.3 20.5.4 20.5.5 20.5.6
Pile Work Pile Work Pile Work Pile Work Pile Work Pile Work
20.6
Pile Work
20.6.1 20.6.1.1 20.6.1.2 20.6.2 20.6.2.1 20.6.2.2 20.6.3 20.6.3.1 20.6.3.2 20.7 20.7.1 20.7.1.1 20.7.1.2 20.7.2 20.7.2.1 20.8 20.8.1 20.8.2 NEWITEMS 20.9
Pile Work Pile Work Pile Work Pile Work Pile Work Pile Work Pile Work Pile Work Pile Work Pile Work Pile Work
Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of Engineer in-charge. Single pile upto 50 tonne capacity Initial test. Routine test Single pile above 50 tonne and upto 100 tonne capacity Initial test Routine test. Group of two or more piles upto 50 tonne capacity Initial test Routine test Cyclic vertical load testing of pile in accordance with IS Code of practice IS: 2911 (part IV) including preparation of pile head etc for. Single pile. Upto 50 tonne capacity pile. Above 50 tonne and upto 100 tonne capacity pile. Group of two piles. Upto 50 tonne capacity each. Lateral load testing of single pile in accordance with IS Code of practice IS : 2911 (Part IV) for determining safe allowable lateral load on pile : Upto 50 tonne capacity pile. Above 50 tonne and upto 100 tonne capacity pile. Integrity testing of Pile using Low Strain/ Sonic Integrity Test/ Sonic Echo Test method in accordance with IS 14893 including surface preparation of pile top by removing soil, mud, dust & chipping lean concrete lumps etc. and use of computerised equipment and high skill trained personal for conducting the test & submission of results, all complete as per direction of Engineer-in-charge. Note :- The inclusion of the above item in the schedule of work shall be judiciously decided by the technical sanctioning authority, keeping in view the quality control, type of soil strata & importance of the project. 21.0 ALUMINIUM WORK Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineerin-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
per test per test per test per test
per test per test
Pile Work Pile Work Pile Work Pile Work Pile Work Pile Work
per test per test per test
Pile Work Pile Work Pile Work Pile Work
per test per test per test
Pile Work
21 21.1
Aluminium Work Aluminium Work
21.1.1 21.1.1.1
Aluminium Work
Aluminium Work
kg
21.1.1.2 21.1.1.3 21.1.2 21.1.2.1 21.1.2.2 21.1.2.3 21.2
Aluminium Work
21.2.1 21.2.2 21.3
Powder coated aluminium (minimum thickness of powder coating 50 micron) Aluminium Work Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) Aluminium Work For shutters of doors, windows & ventilators including providing and Aluminium Work fixing hinges/ pivots and making provision for fixing of fittings wherever Anodised aluminium (anodised transparent or dyed to required shade required including the cost of EPDM rubber / neoprene gasket required according to IS: 1868, Minimum anodic coating of grade AC 15) (Fittings shall be paid for separately). Aluminium Work Powder coated aluminium (minimum thickness of powder coating 50 micron) Aluminium Work Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) Aluminium Work Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin-charge. Aluminium Work Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. Aluminium Work Pre-laminated particle board with decorative lamination on both sides.
kg kg
kg kg kg
sqm sqm
21.3.1 21.3.2 21.3.3 21.4
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): Aluminium Work With float glass panes of 4.0 mm thickness Aluminium Work With float glass panes of 5.50 mm thickness Aluminium Work With float glass panes of 8 mm thickness Aluminium Work Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors , embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.
sqm sqm sqm
21.4.1 21.4.2 21.5
With stainless steel cover plate minimum 1.25 mm thickness. With brass cover plate minimum 1.25 mm thickness. Aluminium Work Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately).
Aluminium Work
each each kg
21.6
Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer -in-charge.
each
21.7
Aluminium Work
Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick & 15 mm dia , at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-charge.. kg
21.7.1
Aluminium Work
Anodised aluminium sheet 2.5mm thick (anodised transparent or dyed to required shade according to IS: Aluminium Work 1868, Minimum anodic coating of grade AC 15)
21.7.2 21.8
21.8.1 21.9 21.9.1 21.9.2 21.10
21.11
21.11.1 21.11.2 21.11.3 21.11.4 21.11.5 21.12 21.12.1 21.12.2 21.12.3 21.13 21.14
Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron) Aluminium Work Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Aluminium Work Upto 5mm depth and 5 mm width Aluminium Work Extra for applying additional anodic coating AC 25 instead of AC 15 to aluminium extruded sections. Aluminium Work For fixed portion Aluminium Work For shutters of doors, windows & ventilators. Aluminium Work Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete. Aluminium Work Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer-incharge complete. Aluminium Work 205 X 19 mm Aluminium Work 255 X 19 mm Aluminium Work 355 X 19 mm Aluminium Work 510 X 19 mm Aluminium Work 710 X 19 mm Aluminium Work Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge. Aluminium Work Anodized (AC 15 ) aluminium tubular handle bar Aluminium Work Powder coated minimum thickness 50 micron aluminium tubular handle bar. Aluminium Work Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar Aluminium Work Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. Aluminium Work Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC 15) sub frame work for windows and ventilators with extruded built up standard tubular sections of approved make
kg
metre
kg kg sqm
each each each each kg
Aluminium Work
conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia and size (Dash fastener to be paid for separately).
Aluminium Work
21.15 21.15.1 21.15.2 21.15.3 21.16 21.16.1 21.16.2 21.16.3 21.17
Aluminium Work
Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete. Aluminium Work Anodized (AC 15) aluminium Aluminium Work Powder coated minimum thickness 50 micron aluminium. Aluminium Work Polyester powder coated minimum thickness 50 micron aluminium. Aluminium Work Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-in-charge
each each each
Anodized (AC 15 ) aluminium Powder coated minimum thickness 50 micron aluminium Aluminium Work Polyester powder coated minimum thickness 50 micron aluminium. Aluminium Work NEW ITEMS Aluminium Work Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).
Aluminium Work
each each each kg
21.18
22 22.1
WATER PROOFING WATER PROOFING
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). 22.0 WATER PROOFING Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge and consisting of : i) Ist layer of 22mm to 25mm thick approved and specified rough stone slab over a 25mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. ii) 2nd layer of 25mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions. iii) Finishing top with stone aggregate of 10mm to 12mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer. Using rough kota stone.
sqm
22.1.1
WATER PROOFING
sqm
22.2
WATER PROOFING
Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge : Using rough Kota stone Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of : i) Ist course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. ii) IInd course of 20mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 Kg. per sqm of area. iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.) sqm sqm
22.2.1 22.3
22.4
WATER PROOFING WATER PROOFING WATER PROOFING WATER PROOFING WATER PROOFING WATER PROOFING WATER PROOFING WATER PROOFING WATER PROOFING WATER PROOFING
22.4.1 22.4.2 22.4.3 22.5
WATER PROOFING WATER PROOFING WATER PROOFING WATER PROOFING WATER PROOFING WATER PROOFING
Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete : Serrated with central bulb (225mm wide, 8-11mm thick). Dumb bell with central bulb (180mm wide, 8mm thick). Kickers (320mm wide, 5mm thick). Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. metre metre metre sqm
22.6
WATER PROOFING
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately For the purpose of measurement the entire treated surface will be measured. Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-incharge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
sqm
22.7
WATER PROOFING
22.7.1 22.8
WATER PROOFING WATER PROOFING WATER PROOFING WATER PROOFING
With average thickness of 120mm and minimum thickness at khurra as 65 mm. Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6mm and down size or pea-sized gravel spread at 6 cubic diameter per square metre including preparation of surface but excluding grading complete with : Bitumen felt (hessian base) type 3 grade I conforming to IS : 1322.
sqm
22.8.1
WATER PROOFING
sqm
22.9
WATER PROOFING
Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth course of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45, 1.20 and 1.45 Kg per square metre of area respectively, second and fourth courses of roofing felt type 3 grade I conforming to IS : 1322 (Hessian based self finished bitumen felt) conforming to IS : 1322 and sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic dm per sqm including preparation of surface but excluding grading, complete. Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blown or / and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade I (fibre base self finished bitumen felt) six and final courses of stone grit 6mm and down size or pea sized gravel spread at 6cu.dm per sqm including preparation of surface, excluding grading, compete. Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blow or/ and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade II (glass fibre base self finished bitumen felt) and sixth and final course of stone grit 6mm and down size or pea sized gravel spread at 6 cubic dm per sqm including preparation of surface but excluding grading, complete. Supplying and applying bituminous solution primer on roof and or wall surface at 0.24 litre per sqm. Deduct for omitting in water proofing treatment final course of spreading stone grit 6mm down size or pea sized gravel : At 6 cudm per sqm. at 8 cudm per sqm. Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Cement mortar 1:3 (1 cement : 3 coarse sand) Cement mortar 1:4 (1cement : 4 coarse sand) Providing and laying in situ seven course water proofing treatment with APP (Atactic poly-propylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film. 7th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1cement:3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat ( item of laying brick tiles shall be paid for separately).
sqm
22.10
WATER PROOFING
sqm
22.11
WATER PROOFING
sqm
22.12
WATER PROOFING WATER PROOFING WATER PROOFING WATER PROOFING WATER PROOFING WATER PROOFING WATER PROOFING WATER PROOFING WATER PROOFING WATER PROOFING
sqm
22.13 22.13.1 22.13.2 22.14 22.14.1 22.14.2 22.14.3 22.15
sqm sqm cum cum cum sqm
22.16
WATER PROOFING
Providing and laying in situ five course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, 2nd & 4th courses of bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd layer of roofing membrane APP modified Polymeric membrane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film. 5th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat ( item of laying brick tiles shall be paid for separately). Providing and laying in situ seven course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film. 7th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 ( 1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately). Providing and fixing APP (Atactic Polypropylene Polymer) modified prefabricated five layer 2mm thick water proofing membrance, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/sq. mtr. by the same membrance manufacture of density at 25C, 0.87 - 0.89 kg/ ltr and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using Butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23C as 350/300 N/ 5cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150C. Cold flexibility shall be upto -2C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacture of membrane. 2mm (for corrugated roof sheets)
sqm
22.17
WATER PROOFING
sqm
WATER PROOFING
22.18
22.18.1
WATER PROOFING
sqm
22.19
WATER PROOFING
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/sqm. by the same membrane manufactured of density at 25C, 0.87 - 0.89 kg/ltr and viscocity 70 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23C as 350/300 N/5cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150C. Cold flexibility shall be upto -2C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/sqm. by the same membrane manufacture of density at 25C, 0.87-0.89 kg/ltr and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23C as 650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150C. Cold flexibility shall be upto -2C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick Extra for covering top of membrane with Geotextile, 120gsm non woven, 100% polyester of thickness 1 to 1.25mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. 23.0 HORTICULTURE & LANDSCAPING Trenching in ordinary soil up to a depth of 60cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). Supplying and stacking of good earth at site including royalty and carriage up to 1 km (earth measured in stacks will be reduced by 20% for payment). Supplying and stacking sludge at site including royalty and carriage up to 1 km (sludge measured in stacks will be reduced by 8% for payment). Supplying and stacking at site dump manure from approved source, including carriage up to 1 km (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 20mm Screened through sieve of I.S. designation 16mm sqm sqm sqm
22.19.1 22.20
WATER PROOFING
22.20.1 22.21
WATER PROOFING WATER PROOFING WATER PROOFING
23 23.1
Horticulture & Landscaping Horticulture & Landscaping
cum
23.2 23.3 23.4 23.4.1 23.4.2
Horticulture & Landscaping
cum cum
cum cum
23.4.3 23.5 23.6 23.7 23.8 23.9 23.10
Horticulture & Landscaping Horticulture & Landscaping Horticulture & Landscaping Horticulture & Landscaping Horticulture & Landscaping
23.10.1 23.10.2 23.11
Horticulture & Landscaping Horticulture & Landscaping Horticulture & Landscaping
Screened through sieve of I.S. designation 4.75mm Rough dressing the trenched ground including breaking clods. Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation. Fine dressing of the ground Spreading of sludge, dump manure and / or good earth in required thickness as per direction of Officer-in-charge (Cost of sludge, dump manure and / or good earth to be paid separately). Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge.. Grassing with selection No.1 grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the good earth shall be paid for separately). In rows 5 cm apart in both directions. With grass Turf. Renovating lawns including weeding, cheeling the grass, forking the ground, top dressing with sludge or manure, mixing the same with forked soil, watering and maintaining the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for mowing and disposal of rubbish as directed, including supplying good earth if needed but excluding the cost of sludge or manure (the good earth shall be paid for separately). Uprooting rank vegetation and weeds by digging the area to a depth of 60cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts. Preparation of beds for hedging and shrubbery by excavating 60cm deep and trenching the excavated base to a further depth of 30cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately). Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) : Holes 1.2 m dia and 1.2 m deep. Holes 90 cm dia, and 90 cm deep. Holes 60 cm dia, and 60 cm deep. Holes 45 cm dia, and 45 cm deep.
cum 100sqm 100sqm 100sqm cum cum
100sqm 100sqm 100sqm
23.12
100sqm
23.13
cum
23.14
23.14.1 23.14.2 23.14.3 23.14.4
Horticulture & Landscaping Horticulture & Landscaping Horticulture & Landscaping Horticulture & Landscaping
each each each each
23.15
23.15.1 23.16
Half brick circular tree guard in bricks, internal diameter 1.25 metre and height 1.2 metre above ground and 0.20 m below ground, bottom two courses laid dry and top three courses in cement mortar 1:6 (1 cement : 6 fine sand) and the intermediate courses being in dry honey comb masonry as per design complete: With common burnt clay F.P.S. (non modular) bricks of class designation 5. Providing and fixing M.S. flat iron tree guard 60 cm dia. and 2 m high, above ground consisting 4 nos. 25 x 6 mm, 2.25 m long and 8 nos. 25 x 3 mm 2 m long verticals M.S. flats, riveted to 3 nos. 25 x 6 mm M.S. flat iron rings in two halves, fixing together at site with required six numbers of 8 mm dia. and 30 mm long bolts, including painting two coats with synthetic enamel paint of approved brand and manufacture over a coat of primer. One name plate of 1 mm thick M.S. sheet of size 250x100 mm shall be welded to the tree guard near the middle height and lettered CPWD / PWD/ any other approved name. The tree guard shall be suitably fixed to the ground by embedding four legs of tree guard in pits of suitable dia and to a depth of 25 cm, refilling the pits with soil and ramming, complete in all respect as per satisfaction and direction of Officer-in-charge. Making tree guard 53 cm dia. and 1.3 m high as per design from empty coal tar drums, supplied free by the department, including providing and fixing 2 nos. M.S. sheet rings 50 x 0.5 mm fixed with rivets complete in all respects including painting inside and outside of tree guard with : A coat of coal tar. Two or more coats of synthetic enamel paint of approved quality shade over a priming coat. Making tree guard 53 cm dia. and 2 m high as per design from empty coal tar drums, supplied free by the department, including providing and fixing four legs 40 cm long of 30 x 3 mm M.S. flat riveted to tree guard and providing and fixing 2 nos. M.S. sheet rings 50 x 0.5 mm fixed with rivets complete in all respects including painting inside and outside of tree guard with : A coat of coal tar. Two or more coats of synthetic enamel paint of approved brand and shade over a priming coat. Edging with bricks laid dry length wise, including required excavation, refilling, consolidating with hand packing and spreading surplus earth neatly within a lead of 50 m : Common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Filling mixture of earth and sludge or manure in the desired proportion in trenches, flooding with water and leveling (cost of supplying earth and sludge or manure and mixing excluded). Excavation in dumped stones or malba including stacking of serviceable and unserviceable material separately and disposal of unserviceable material, lead up to 50 m and lift up to 1.5 m, disposed material to be neatly dressed. Excavation in bajri path including stacking of serviceable and unserviceable material separately, lead up to 50 m and lift up to 1.5 m, disposed material to be neatly dressed.
each each
23.17
23.17.1 23.17.2 23.18
each each
23.18.1 23.18.2 23.19 23.19.1 23.20 23.21
each each
metre cum cum
23.22
cum
23.23
23.24
23.25 23.26
Excavation in water bound macadam road including stacking the serviceable and unserviceable material separately and disposal of unserviceable material, lead up to 50 m and lift up to 1.5 m, disposed material to be neatly dressed. Flooding the ground with water including making kiaries and dismantling the same. NEW ITEMS Supplying and stacking of well decayed cow dung manure at site including royalty and carriage upto 1 km (Cow dung manure measured in stacks will reduced by 8% for Payment). Providing and fixing M. S. tree guard 45 cm square in plan, height 1.20 metre above ground level and 0.40 metre below ground level. The vertical members shall consist of four nos. angle iron of size 25x25x3 mm, 1.8 m long, one at each corner and 8 nos. flat iron of size 25x3 mm, 1.2 m long. The vertical mambers shall be welded to 4 nos. 25x6 mm M. S. flats placed horizontally around the vertical member of the cage. One name plate of 1 mm thick M.S. sheet of size 250x100 mm shall be welded to the tree guard near the middle height and lettered CPWD / PWD/ any other approved name. The tree guard shall be fixed to the ground by making suitable holes and by embedding four corners leg in the ground, including refilling the earth, compaction etc. complete. The tree guard shall be painted with two or more coats of synthetic enamel paint of approved brand and manufacture over a coat of primer, complete in all respect. Providing and fixing M. S. tree guard 50 cm square in plan, height 1.40 metre above ground level and 0.50 metre below ground level. The vertical members shall consist of four nos. of angle iron of size 25x25x5 mm 1.9 long, one at each corner and 8 nos. flat iron of size 25x5 mm 1.4 long. The vertical members shall be welded to 4 nos. 25x6 mm M. S. flats placed horizontally around the vertical member of the cage. One name plate of 1 mm thick M.S. sheet of size 250x100 mm shall be welded to the tree guard near the middle height and lettered CPWD / PWD/ any other approved name. The tree guard shall be fixed to the ground by making suitable holes and by embedding four corners leg in the ground , including refilling the earth , compaction etc. complete. The tree guard shall be painted with two coats of paint of approved brand and manufacture over a coat of primer, complete in all respect. Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge. Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos. ( 3 nos. horizontal & 4 nos. vertical U shape) M.S. wires of 3.5 mm dia as per design , including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height , all complete as per direction of Officer-incharge. Top inside dia 35 cm, outer bottom dia 25 cm, total height 35 cm with wall thickness of 25.4 mm. Top inside dia 30 cm, outer bottom dia 20 cm, total height 30 cm with wall thickness of 25.4 mm.
cum
100sqm
cum
23.27
each each
23.28
cum
23.29
23.30.1 23.30.2
each each
23.30
Providing Square Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos. ( 3 nos. horizontal & 4 nos. vertical U shape) M.S. wires of 3.5 mm dia as per design , including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height , all complete as per direction of Officer-incharge. Top inner width 35 cm, outer bottom width 25 cm, total height 35 cm and wall thickness 25.4 mm. RAIN WATER HARVESTING & TUBEWELLS each
23.30.1 24
Horticulture & Landscaping Horticulture & Landscaping Rain Water Harvesting & Tubewells Rain Water Harvesting & Tubewells Rain Water Harvesting & Tubewells
24.1
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer in-charge, upto 90 metre depth below ground level. All types of soil 300 mm dia. 350 mm dia. 400 mm dia. Rocky strata including Boulders. 300 mm dia. 350 mm dia. 400 mm dia. Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer in-charge, beyond 90 metre & upto 150 metre depth below ground level. All types of soil 300 mm dia. 350 mm dia. 400 mm dia. Rocky strata including Boulders. 300 mm dia. 350 mm dia. 400 mm dia. metre metre metre metre metre metre metre metre metre metre metre
24.1.1 24.1.1.1 24.1.1.2 24.1.1.3 24.1.2 24.1.2.1 24.1.2.2 24.1.2.3 24.2
Rain Water Harvesting & Tubewells Rain Water Harvesting & Tubewells Rain Water Harvesting & Tubewells Rain Water Harvesting & Tubewells Rain Water Harvesting & Tubewells Rain Water Harvesting & Tubewells Rain Water Harvesting & Tubewells Rain Water Harvesting & Tubewells Rain Water Harvesting & Tubewells
24.2.1 24.2.1.1 24.2.1.2 24.2.1.3 24.2.2 24.2.2.1 24.2.2.2 24.2.2.3
Rain Water Harvesting & Tubewells Rain Water Harvesting & Tubewells Rain Water Harvesting & Tubewells Rain Water Harvesting & Tubewells Rain Water Harvesting & Tubewells Rain Water Harvesting & Tubewells Rain Water Harvesting & Tubewells Rain Water Harvesting & Tubewells
24.3
Rain Water Harvesting & Tubewells
24.3.1 24.3.2 24.3.3 24.4
Rain Water Harvesting & Tubewells Rain Water Harvesting & Tubewells Rain Water Harvesting & Tubewells Rain Water Harvesting & Tubewells
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer in-charge. 100 mm nominal size dia. 150 mm nominal size dia. 200 mm nominal size dia. Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 100 mm nominal size dia. 150 mm nominal size dia. 200 mm nominal size dia. Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineerin-charge. Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer in-charge. Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four no longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-incharge. Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/ plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-incharge. 100 mm nominal size dia having minimum wall thickness 5.00 mm 150 mm nominal size dia having minimum wall thickness 5.00 mm 200 mm nominal size dia having minimum wall thickness 5.40 mm
metre metre metre
24.4.1 24.4.2 24.4.3 24.5 24.6
metre metre metre
24.7
24.8
24.9
24.10
24.10.1 24.10.2 24.10.3
Rain Water Harvesting & Tubewells Rain Water Harvesting & Tubewells Rain Water Harvesting & Tubewells
metre metre metre
24.11
Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed / plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer in-charge. 100 mm nominal size dia. 150 mm nominal size dia. 200 mm nominal size dia. Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 100 mm dia 150 mm dia 200 mm dia Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 100 mm clamp. 150 mm clamp. 200 mm clamp. Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 100 mm dia 150 mm dia 200 mm dia CONSERVATION OF HERITAGE BUILDINGS Raking out joints of stone masonry surface to the required width and depth, with due care and precaution, by mechanical / manual means, including preparing and cleaning the surface for re-pointing/ refilling of joints, including disposal of rubbish to the dumping ground within 50 metre lead. sqm metre metre metre
24.11.1 24.11.2 24.11.3 24.12
24.13 24.13.1 24.13.2 24.13.3 24.14 24.14.1 24.14.2 24.14.3 24.15 24.15.1 24.15.2 24.15.3 25 25.1
each each each
Rain Water Harvesting & Tubewells Rain Water Harvesting & Tubewells Rain Water Harvesting & Tubewells Rain Water Harvesting & Tubewells Rain Water Harvesting & Tubewells Rain Water Harvesting & Tubewells Rain Water Harvesting & Tubewells CONSERVATION OF HERITAGE BUILDING CONSERVATION OF HERITAGE BUILDING
each each each
each each each
25.2
CONSERVATION OF HERITAGE BUILDING
Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia. M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:- 1) The elevational area of the scaffolding shall be measured for payment purpose. 2) The payment will be made once only for execution of all items for such works. Cleaning the sand stone surface and removing dirt, dust, bird dropping, grease, oil, algae, fungus, monkey beats, vegetable growth etc., including providing, applying and washing the surface with liquid Ammonia Chemical of 5% solution and other chemical cleaning agent as approved by Archaeological Survey of India/ Engineer-in-charge, of approved brand and manufacturer, with the help of required scrubbers and also cleaning with machine operated water jet mixed with desired quantity of fine silica where ever required, without causing any scratching/ damage to the stone surface and finally washing the surface with clean water with the help of pressure jet machine, complete in all respect, including taking all precautions to safeguard ventilators, windows, doors etc. by suitable covering so as to avoid any damage to the building/ structure, all as per direction of Engineer-in-charge (The rate is inclusive of all materials & labours involved except scaffolding). Providing and applying antifungal wash treatment using 3% solution of sodium pentachlorophenate, of reputed brand and manufacturer, on cleaned sand stone surface at desired locations as per direction of Engineer-in-charge (The rate is inclusive of all materials & labours involved except scaffolding). Ruled /Flush pointing on Red sand stone masonry surface with lime, surkhi and marble dust mortar in the ratio of 1:1.5:1/2 {One lime: 1.5 surkhi (50% red and 50% light yellow surkhi ):1/2 marble dust}. (The rate is inclusive of all materials & labours involved except scaffolding). Ruled/ Flush pointing on White sand stone masonry surface with lime, surkhi and marble dust mortar in the ratio of 1:1.5:1/2 {One lime:1.5 surkhi (15% dark red and 85% light yellow surkhi ):1/2 marble dust}. (The rate is inclusive of all materials & labours involved except scaffolding). Applying two or more coat of Ethyl Silicate chemical as approved by Archaeological Survey of India/ Engineer-in-charge, of approved brand and manufacturer, with brush or spray on the existing stone masonry surface till there is no further absorption of chemical by stone surface, including protecting the applied surface from direct sunlight by suitable means during application, all complete as per direction of the Engineerin-Charge (The rate is inclusive of all materials & labours involved except scaffolding).
sqm
CONSERVATION OF HERITAGE BUILDING CONSERVATION OF HERITAGE BUILDING
25.3
sqm
25.4
sqm
25.5
sqm
25.6
sqm
25.7
sqm
25.8
Applying breathable, non-reactive, antifungal, and water repellant Silane/ Siloxane chemical as approved by Archaeological Survey of India/ Engineer-in-charge, of approved brand and manufacture, diluted with solvent mineral Turpentine oil in the ratio of 1:12 (One part of approved chemical :12 Part of Turpentine oil), on the existing sand stone masonry surface with two or more coats to give uniform application of chemical on the surface, all complete as per direction of Engineer-In-charge (The rate is inclusive of all materials & labours involved except scaffolding).
sqm
. 26 26.1 26.1.1 26.1.2 26.2
Electrical Works Electrical Works Electrical Works Electrical Works Electrical Works
SUB HEAD TOTAL Electrical Works

Supplying and fixing of following sizes of steel conduit along with accessories in surface / recess conduit including cutting the wall and making good the same in case of recessed conduit as required. 20 mm 25 mm Providing for clamp made out of 12 mm dia M.S. rod in 'U' shape with their vertical legs bent horizontally at the top on either side & bound to the top reinforcement on the roof as per CPWD specification Clause 2.27-1(1) Electrical Bulk Services : Supplying and installation of Swerage Treatment Plant. Supplying and fixing of Penstock gate made by CI plate circular type (300 mm dia) with Central shaft for restriction of flow at inlet etc. as required. Supplying and fixing of coarse bar sereen size of made of MS plate with epoxy painting to restrict bigger particles more than 25mm of size for entering the plant as required. Supplying, installation, testing and commissioning upto 3 KW Transfer Pump Vertical type 30 Cum / Hr discharge and dry head 12 mtr submersible with cutter mechanism level switch operation and lifting chain pulley arrangement etc. as required. Supplying and fixing fine bar screen made of MS Plate with epoxy painting size of to restrict the particles more than 15mm of size for entering the plant as required. Supplying installation, testing and commissioning of fixed type surface aerators made of MS materials with FRP coating slow speed turbine type with impeller comprising upto 10 KW motor, 50 - 60 r.m.p. and gear assembly, necessary coupling, base plate foundation and fixing bolts and other accessories etc. as required. Supplying and fixing of secondary clarifier made of MS material epoxy painted 7.5 mtr. Dia central driven, with radial bridge, bottom scrapper mechanism driven upto 2 KW geared motor etc. as required. Supplying, installation, testing and commissioning upto 2 KW Non clog horizontal centrifugal pump (capacity 20 cum / hr, 25 metre working head) etc as required for sludge recirculation. Supplying, installation, testing and commissioning upto 5 KW Non clog horizontal centrifugal pump (capacity 20 cum / hr, 25 metre working head) etc as required (Note : To transfer treated sewage from filter feed tank after clarifier to filter) each each each
meter meter each
Electrical Works Electrical Works Electrical Works Electrical Works Electrical Works Electrical Works
26.3 26.4 26.5
26.6 26.7
Electrical Works Electrical Works
each each
26.8 26.9 26.10
Electrical Works Electrical Works Electrical Works
each each each
26.11
Electrical Works
Supplying and fixing Dual Media filter made of M.S. materials with epoxy painted ( size 1600 x 1500 mm) with necessary pipe lines, valves accessories and filter, media etc. as required. (Drawing to be approved) Supplying and fixing open channel flow meter range 0 to 50 cum / hr in the system including testing etc. as required. Supplying and fixing of following piping valve and fittings with instruments etc. as required. ERW MS Pipe 40 NB - 30 Mtr 50 NB - 20 Mtr 65 NB - 30 Mtr 80 NB - 30 Mtr 100 NB - 4 Mtr Valves CI Valve CI Butterfly valve CI Non return valve Y - Strainter Pressure gange (Bourdon Type) Level Switch (Float type) - 6 Nos.
each
26.12 26.13 26.13a 26.13a.i 26.13a.ii 26.13a.iii 26.13a.iv 26.13a.v 26.13b 26.13b.i 26.13b.ii 26.13b.iii 26.13b.iv 26.13c 26.13d 26.14
Electrical Works Electrical Works Electrical Works Electrical Works Electrical Works Electrical Works Electrical Works Electrical Works Electrical Works Electrical Works Electrical Works Electrical Works Electrical Works Electrical Works Electrical Works Electrical Works
each
1 job
26.15 26.16
Electrical Works Electrical Works
Providing and laying 1100V garde, PVC insulated 4 x 16 sq. mm 1 job armoured aluminium cable with 2 Nos. GI earthwire on surface including end termination with cable gland and socket and necessary 2 Nos. GI pipe earthing etc. as required. Supplying and added EM culture Biomass Micro trial Solution before per 40 ltr. commissioning and stabilization the plant as required. Fabrication supplying, installation, testing and commissioning of floor mounted cubical type LT panel of in compartmentalized design made of 2 mm thick CRCA sheet of welded construction IPS2 Protection Cu. busbar with hinged type door for busbar, switch gears, metering instrument cabinet as per approved drawing with connection & inter connection of following switch gears, busbar, auxiliary busbar metering instrument etc. complete with duly powder coating painted after anti corrosive treatment proper gasketing adequate ventilation arrangement, provision for cable entre & outlet at bottom / side fixed on angle iron leg & erectio on foundation with 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) neatly plastered & neat cemented as required. 125 Amps. TPN SDFU with HRC fuses - 1 No. 2/3/5 KW Transfer pump / sludge Recirculation pump / filter feed pump / sparepanel with starter overload relay, on / off / trip led indicator, SPP, level switch operation - 4 Nos. 10 KW Aerator feeder panel with starter, overload relay, on / off / trip led indicator, SPP, - 1 No. 2 KW up to clarifier Aerator feeder panel with starter, overload relay, on / off / trip led indicator, SPP, - 1 No. 20 amp SP MCB within Enclosure 1 No.
26.16a 26.16b 26.16c 26.16d 26.16e.1
Electrical Works Electrical Works Electrical Works Electrical Works Electrical Works
1 job
Electrical Works
NON-SCHEDULED ITEMS
2.27 2.27.A
EARTH WORK
EARTH WORK
Supplying and filling in plinth with fine sand under floors including, watering, ramming consolidating and dressing complete. Supplying & filling with carried earth by mechanical transport i/c royality & cost of earth, excavation at source, loading into truck, unloading the same at site, banking the earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling, each layer with tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8-10 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, upto all lead & lift, all as per direction of Engineerin-charge.
Supplying & filling in position with river bed material in layers including watering, ramming, consolidating upto desire density & dressing as per CPWD specification with mechanical transport i/c loading and unloading upto all lead lift. all complete as per direction of Engineer-in-charge. Disposal of excavated earth beyoned an initial lead og 50 Mtr. Upto 500 mtrs by manual labour. Supplying & filling with carried earth by mechanical transport i/c royality & cost of earth, excavation at source, loading into truck, unloading the same & stacking at site banking the earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling, each layer with tonne roller or wooden or steel rammers, and dressing up etc. upto a lead of 5.00 km. all as per direction of Engineer-in-charge. Supplying & filling in plinth with river bed local coarse sand in layers including watering, ramming consolidating upto desire density and dresing as per CPWD specification with mechanical transport including loading and unloading upto all lead and lift etc. complete as per direction of Engineer-in-charge.
cum cum
2.27.B
EARTH WORK
cum
2.27.C 2.27.D
EARTH WORK
cum cum
EARTH WORK
2.27.E
EARTH WORK
cum
2.27.F 2.27G 2.27G.1 2.27.H
EARTH WORK
EARTH WORK
EARTH WORK EARTH WORK
Supplying and filling in plinth with fine sand under floors including, watering, ramming consolidating and dressing complete. Supplying and filling in plinth with fine sand under floors including, watering, ramming consolidating and dressing complete. Supplying of good earth at site including al leads & lifts. Suplying & filling with carried earth by mechanical transport i/c royalty & cost of earth, excavation at source, loading into truck, unloading the same & filling earth (excluding rock) in trenches, plinth, sides of foundations, etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, breaking clods, watering and rolling each deposited layer by 1/2 tonne roller or wooden or steel rammers and dressing up etc. including all lead & lift complete as per direction of Enginner - in- Charge. Supplying Veedified like Granomaxin etc. in sealed containers including delivery as specified. Veedified like Granomaxin etc.
cum
cum cum
2.34.A 2.34.A.1
EARTH WORK
EARTH WORK
litre
4.19.A
CONCRETE WORK
Extra for addition of synthetic Polyester triangular fibre of length 12mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement concrete/RCC/Flooring/water retaining structures by using 125gms of synthetic Polyester triangular fibre for 50 kgs. cement used as per directions of Engineer -in-Charge. Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). 25.5m to 26.5m 26.5m to 27.5m 27.5m to 28.5m Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete work including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement. including Admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. M-25 grade reinforced cement concrete by using 380kg. of cement per cum of concrete. All work above plinth level up to floor V level. Extra for using cement mortar 1:4(1 cement:4 coarse sand) instead of cement mortar 1:6(1 cement:6 coarse sand) in brick work with F.P.S. bricks of class designation 75 in foundation and plinth Extra for using cement mortar 1:4 (1 cement:4 coarse sand) instead of cement mortar 1:6 (1 cement: 6 coarse sand) in brick work with F.P.S. bricks of class designation 75 in foundation and plinth Providing and fixing Wall panels which will be PUF panels, will be made up of 60mm thick of make Lloyd panel system / Modern panels / jindal Mecleno / PSL Engineering. The panels will be made of 0.5mm thick PPGI on both side with 60 mm thick layer of rigid CFC free polyurethane foam of density 40 Kg +/-2 Kg / cum as insulation. The wall PUF panels will be provided with tongue and groove joint and will be interlocked using with cam lock systems. Gable ends will also be covered with same panels of wall. All material required for the manufacture of shelter will be new and shall comply with relevant Bureau of Indian Standard Specification. The PUF insulation materials in the panel will have fire retarrding and self extinguishing properties as per International standard B2 DIN 4102 part / BS - 4735. The wall panels at the corner will be joined by PPGI corner angle. The wall panels will also have PPGI top track. The wall & floor panels will be joined with wall-floor angle made of PPGI. Since all the flashings are PPGI hence on welding is allowed the PPGI angle & Flashing are to be bended or / & riveted to from the desired shape & size. Hand packet stone filling in foundation, plinth, road soling and back side of retaining wall and like places etc. (payment to be made after deduction of 15% voids.)
kg
5.3A
cum
5.11.1.23A 5.11.1.24A 5.11.1.25A 5.33.A
sqm sqm sqm cum
6.45.A 6.1.A 6.46.A
BRICK WORK
Cum Cum sqm
BRICK WORK
BRICK WORK
7.43.A
STONE WORK
cum
7.43.B
STONE WORK
Providing and laying plum concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) with admixture of plum stone not exceeding 35% in retaining walls breast walls etc. including providing weep hole of diameter 10cms. Providing and fixing 20mm thick mirror polished,machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, cutting etc. complete at all levels. Kota stone slab Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Coir veneer board (conforming to IS : 14842-2000) : Particle Board 12 mm thick Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side, Grade I, Type II IS: 12823 marked. Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Brass butt hinges (light/ordinary type 125x70x4 mm) with necessary screws. Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked including top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade, steel pipe 20 mm dia ( heavy type ) curtain rod with nickel plated brackets including fixing with 25x3 mm M.S. flat 10 cm long and rawl plugs 50 mm long (designation 10 no.) etc all complete Providing and fixing fly proof galvanised Stainless Steel wire gauze to windows and clerestory windows using galvanised Stainless Steel wire gage with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm. With 12 mm Stainless Steel U beading. Providing and fixing fly proof Stainless Steel wire gauze to windows and clerestory windows using galvanised Stainless Steel wire gage with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm. Providing and fixing ' ULTRA VERTIBOLT' locks (Godrej Product code9972) for Flush doors including necessary cutting and making good etc. complete. Providing and fixing 'Hydaulic Door Closure' Heavy duty (Godrej Product code-1938) for Flush Doors including necessary cutting and making good etc. complete. Providing and fixing magnetic ball catcher with necessary screws (Best make of approved quality) as per direction of Engineer-in-charge.
cum
STONE WORK
8.2.A
MARBLE WORK
8.2.A.1 9.8A
MARBLE WORK WOOD WORK
sqm
9.8A.1 9.8A.1.1 9.21A
WOOD WORK WOOD WORK
sqm
WOOD WORK
9.21A.1 9.42A
WOOD WORK
sqm metre
WOOD WORK
9.51A
WOOD WORK
9.51A.2 9.51B
WOOD WORK WOOD WORK
sqm sqm
9.88.A 9.88.B 9.114.A
WOOD WORK
each each each
WOOD WORK
WOOD WORK
9.134.A
WOOD WORK
9.3A 9.3A.1 9.36A 9.36A.1 9.47.A 9.47.A.1 9.27A
WOOD WORK
WOOD WORK WOOD WORK
WOOD WORK WOOD WORK
WOOD WORK WOOD WORK
9.27A.1 9.27A.2 9.27B
9.27B.2 9.45A 9.132.A 9.132.B 9.85A 9.134A
WOOD WORK WOOD WORK
WOOD WORK
WOOD WORK
WOOD WORK
WOOD WORK
Providing and fixing in position panneling using G.I stud and 6mm thick E-board and pasting 13mm Acostyle boards, with the rubber adhesive on the top of the 6mm board with the frame work, all complete as per drawing and direction of Engineer-in-charge. (Frame work will be paid sepratly) Providing and fixing wood work in frames of wall panelling sawn and put up in position with minimum 4" dash fastner as approved by the Engineer-in charge. Teak wood Providing and fixing specified wood frame work for wall panelling consisting of battens 50x50mm fixed with 4" dash fastner etc. including priming coat complete. Second class Teak wood. Providing and fixing Stainless steel pipe( weight not less than 338 gms for 1.13 m length) curtain rods with nickel plated brackets : 20 mm dia Providing and fixing 35mm thick wire gauze shutters using galvanised Stainless Steel wire gauze of average width of aperture 1.4mm with wire of dia. 0.38 mm for doors, windows and clerestory windows including ISI marked bright finished or/and black enamelled M.S. butt hinges with necessary screws : Second class teak wood. Kiln seasoned and chemically treated Hollock wood. Providing and fixing 35mm thick wire gauze shutters using galvanised M.S. wire gauze of average width of aperture 1.4mm with wire of dia. 0.63 mm for doors, windows and clerestory windows including ISI marked bright finished or/and black enamelled M.S. butt hinges with necessary screws as per direction of Engineer-in-charge. Local hard wood Providing and fixing teak wood lipping of size 25x12.5 mm in cupboard shutters. Providing and fixing aluminum U beading of required size to cup-board shelves including fixing etc. complete as per direction of Engineer-incharge. Providing and fixing 18 mm thick water proofing ply wood in cup board shelves with rawl plugs nails as per direction of Engineer-in-charge. Providing and fixing MS casement window fastener with necessary screws etc. complete. Providing and laying of PVC Sheet under floor having weight not less than 120 gms per sqm.
sqm
cum
cum
metre
sqm sqm
sqm metre metre sqm each sqm
10.11.A
STEEL WORK
Providing and fixing factory made ISI marked steel wire mesh windows and with side /top /centre hung with beading and all members such as F7D and F4B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and rivetted with 15x3mm lugs, 10cm long, embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of hinges, pivots, metal beading stainless steel wire mesh of wire dia 0.38 mm and 14mm (minimum) apertures in square i.e both directions including a priming coat of approved steel primer excluding the cost of other fittings except necessary hinges or pivots complete as per approved design. (Sectional weight of only steel members on centre line measurement excluding the weight of wire mesh,beading,lugs,hinges,pivots etc.shall be measured for payment purpose). Providing and fixing factory made ISI marked steel wire mesh windows and with side /top /centre hung with beading and all members such as F7D and F4B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and rivetted with 15x3mm lugs, 10cm long, embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of hinges, pivots, metal beading stainless steel wire mesh of wire dia 0.38 mm and 14mm (minimum) apertures in square i.e both directions including a priming coat of approved steel primer excluding the cost of other fittings except necessary hinges or pivots complete as per approved design. (Sectional weight of only steel members on centre line measurement excluding the weight of wire mesh,beading,lugs,hinges,pivots etc.shall be measured for payment purpose). Providing and fixing factory made ISI marked steel wire-mesh windows and ventilator side / top / center hung with beading and all member such as K11B and K12B etc.complete of standerd rolled steel section, ,joints mitred and flash butt welded and panell bars (T6) tenoned including fixed with steel beading of required shape and section by welding or screws or rivets including providing and fixing of hinges pivots, stainless steel wire mesh of wire dia 0.40 mm and average width of aperture of having 16 nos. in 1" (one inch) on both directions including a priming coat of approved steel primer on sectional members excluding the cost of other fittings except necessary hinges or pivots complete as per approved design. (Sectional weight of only steel members even excluding the weight of stainless steel wire mesh, hinges, lugs, steel beading etc. shall be measured for payment purpose) Providing Pre designed & Pre - engineered structure works for primary / secondary member / rafters, roofing and all other miscellaneous work as per drawing including necessary welding, bolting etc. and fixing of connection fasteners, bolts etc. tools, plant, transportation and labour, complete for the truss width 14.4m x length 33.46 m & height 6m top of RCC column. {Primary members are made from hot rolled plates conforming to ASTM A-572 Gr-50 (345 Mpa) steel the plates are joined together on one side of the web by continuous automatic submerged arc welding. Black (non coated) cold formed sections of thickness 1.6mm, 2.0mm and 2.5mm are made of hot rolled sheet to ASTM - A 607 (345Mpa) steel.}
kg
10.11.B
STEEL WORK
kg
10.11.C
STEEL WORK
kg
10.16.A
STEEL WORK
kg
10.17.A
STEEL WORK
10.18.A
STEEL WORK
10.27.A
STEEL WORK
10.27.B
STEEL WORK
10.27.C 10.26A
STEEL WORK
STEEL WORK
10.26A.1 10.27A
STEEL WORK STEEL WORK
10.28A
STEEL WORK
10.29A 10.30.A
STEEL WORK
STEEL WORK
Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar bent to shape with hooked ends in RCC slabs, beams during laying including painting the exposed portion of loop, all as per standard design complete. Providing and fixing circilar / Hexagonal cast iron or M.S. sheet box for ceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mm thick M.S.sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron / MS sheet box by means of 3.3mm dia, round headed screws, one lock at the corners, clamp shall be made of 12mm dia MS bar bent to shape as per standard drawing. Providing and fixing 600 mm dia standard mosquito proof C.I. hinged cover with frame including painting with anti-corrosive bitumastic (Two or more coats) over a coat of red lead primer as per direction of the Engineer-in-charge including hosting the required level. Supplying & fixing aluminium ladder 380 mm wide with vertical sides of 66x3 mm size and steps with 25 mm dia aluminium round bar placed 30 mm centre to centre manufacture and installed as per direction of the Engineer-in-charge. Providing and laying cutting Edge of Mild Steel weighing 48 Kg. per metre for well foundation complete as per drawing and technical specification. Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing including holdfasts, concealed base, bending, making holes, grinding, butting and polishing as per direction of Engineer-in-charge. Stainless steel Supplying & fixing aluminium ladder 380 mm wide with vertical sides of 66x3 mm size and steps with 25 mm dia aluminium round bar placed 30 mm centre to centre manufacture and installed as per direction of the Engineer-in-charge. Providing and fixing 600 mm dia standard mosquito proof C.I. hinged cover with frame including painting with anti-corrosive bitumastic (Two or more coats) over a coat of red lead primer as per direction of the Engineer-in-charge including hosting the required level. Providing and laying cutting Edge of Mild Steel weighing 48 Kg. per metre for well foundation complete as per drawing and technical specification. Providing & fixing asbestos sheets in joints of C.C. pavement 150 mm wide 4 mm thick.
each
each
each
each
M.T.
metre each
each
MT
metre
11.34.A
FLOORING
Providing and laying 38mm thick parquet ( wood block) flooring of second class teak wood blocks of size 245x35x38mm with dove/ tail joints layed over complete surface coated with layer of hot bitumen (blown type) @ 2.45 kg per sqm. Blocks to be coated on sides with adhesive of approved quality and fixed in position in herring-bone or other approved pattern, grinding, finished complete with Poly-eurithine polish of "MRF" or equivalent brand as per direction of Engineer-incharge. Providing and fixing Ist quality ceramic glazed wall tiles of size (30cmx60cm) conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-inCharge in edges of roof etc. over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete upto all height.
sqm
11.36A
FLOORING
sqm
11.38A
FLOORING
11.44A
FLOORING
Providing and laying rectified Ceramic glazed floor tiles 400x400 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours, shades, except White, Ivory, Grey, Fume Red Brown laid on 20mm thick bed of Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete. Providing an Fixing Floor panels 60 mm Thick which will be made of PUF panel system using 0.5 mm thick PPGI as outer skin and 18 mm thick ply as per IS 303 as inner skin with & gap filled with 40 mm thick layer of rigid CFC free polyurethane foam of density 40 Kg +-2 KG / cum as insulation with 2 Nos. reinforcement tube of size 60x40x2mm thick. The floor panel shall have tongure & groove joint & will be interlocked with each other-length wise using cam lock systems floor in the living areawill be finished with laying & fixing of laminated board flooring. In toilets floor will be finished with 1mm thick aluminium chequered plate. All material required for the manufacture of shelter will be new and shall comply with relevent Bureau of Indian Standard Specification. The PUF insulation material in the panel will have fire retarding and self extinguishing properties as per any international standard B2 DIN 4102 part / BS - 4735. Aluminium flat of size 40x3mm will be provided for all the floor joints to secure the edge of PVC Vinly flooring during usage of the shelter. The wall & floor panels will be joined with floor angle made of PPGI. Since all the flashings are of PPGI hence no welding is allowed. The PPGI angle flashings are to be bended or / & riveted to from the desired shape & size. Providing and fixing at all height false ceiling of 12.5mm thick tapered edge gypsum board conforming to IS: 2095 including and providing and fixing work made of special sections power pressed from M.S sheet galvanised in accordance with zinc coating as per IS: 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax x 40mm long with 6mm dia bolts to the angle hangers of 25x25x5mm of required length , and other end of angle hanger being fixed with nut and bolts to G.I channels 45 x 15x 0.9mm running at the rate of 1200mm centre to centre to which ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I channels with connecting clips made out of 2.64mm dia x 230mm long G.I wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of the ceiling fixed to wall / portion with the help of rawl plugs at 450mm centre to centre with 25mm long drive -all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the gypsum board with recommended filler, paper tapes, finisher and to coarse of primer suitable for gypsum board as [err manufacture specification and also including the coat of making opening for light fittings, grill, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer in charge but excluding the cost of painting.
sqm
11.44A.1
FLOORING
sqm
12.52.A
ROOFING
sqm
12.1A
ROOFING
Providing minimum 0.58 mm thick (total coated thickness) Regular Modified Polyester coated concealed fixed galvanised steel sheet Z-18275Mpa substrates of approved Torres blue / beige / autumn red / green shade or as decide by the Engineer in charge (TRACKED KLIPPON or equivalent make) roof paneling fixed to purlins / secondary rafters by means of connecting clips and wafer head corrosion protected mechanically galvanised self drilling fasteners complete including ridges and flashing of approved profile, standard concealed clips, cappings, trims, filler strips etc. of approved design. Gutters of approved pattern profile made out of minimum 750mm wide 0.5mm thick galvanised sheets Z-18-275 with scope to cater for maximum rainfall of Siliguri area and their supporting arrangement complete. The work shall include all operation mentioned above. Labour tools and plants and materials required for proper completion of work as per standard specification. Structural and architectural drawings and direction of Engineer in charge. (The details Engineering and structural design, drawings fabrication and erecting shall be done by the associated firm as approved by the Engineer in charge before execution of the work. The payment will be maid for the complete finished work measured inside the shed from wall (Plaster finished) to wall. Nothing extra will be payable of the Gutters, Ridges. (RCC columns shall be paid for separately). Providing corrugated CRILL sheet of approved pattern in roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275gm/ m Supply of Tracdek Klippon profiled sheeting, 406mm cover width, 41mm hi crests at 203 mm centres, in lengths upto 12 mtrs. to suit site requirements in pre-painted Galvalume Steel. Sheet to have wide pans with stiffening ribs for efficient water shedding and special male female ends with full return leg on side lap for purlin support and anti capillary flute in side lap. The substrate would be cold rolled steel, 275 Mpa yield stress ( ASTM A 446 Grade - E) with hot-dip metallic coating of Aluminium - Zinc Alloy (150 gsm / SqM. total of both sides, AZ-150 as per ASTM A 792 or AS 1397), 0.58 mm TCT (total coated thickness). The sheets shall be coated with 20 micron exterior coat of Silicon Modified Polyester (SMP)/BHP XRW paint system over 5 micron primer and 5 micron Polyester back cost over 5 micron primer. Sheets shall be fixed to purlins / girts with concealed clips and no fasteners to penetrate the sheeting. The clip should lock over the male rib and into the underside of the centre and female ribs and shall be fastened to support with wafer head self drilling zinc coated fasteners. The sheets shall be supplied in lengths max. upto 12 mtrs long to suit site dimensions. The insulation of 50- mm thick fibre glasswool insulation of 24 Kg/m3 density with FRK facing one side shall be laid over the internal sheeting and held between the external and internal sheets. Supply of Gutter made out of 0.50mm TCT SMP Coated Galvalume Steel (Cold rolled steel, 550 MPa Providing ridges or hips of width 60 cm over all width plain CRILL sheet of approved pattern fixed with polymer coated J. or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete. sqm
12.1A.1
ROOFING
12.1.B
ROOFING
12.1.B.3 12.1.C
ROOFING ROOFING
sqm sqm
12.1.D 12.1.E 12.4.A
ROOFING
sqm sqm
ROOFING
ROOFING
12.4.A.2 12.7.A
ROOFING ROOFING
12.7.A.2 12.53A
ROOFING ROOFING
0.63mm thick with zinc coating not less than 275gm/m Providing and fixing 15 cm wide 45 cm over all semi circular plain CRILL sheet gutter of approved pattern with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. 0.63mm thick with zinc coating not less than 275gm/m Providindg and fixing of False ceiling of 30mm thick PUF panel having outer skin 0.5mm thick PPGI Trapezoidal colour coated sheet & inner skin as 0.5mm thick PPGI sheet& minimum 30mm thick layer of rigid CFC free polyurethane foam of density 40 Kg +/- 2 Kg / cum as insulation. The roofing panels will be fixed to Z shaped purlin using STSD screws having suitable washer. All material required for use manufacture of shelter will be new and shall comply with relevant Bureau of Indian Standard Specification. The PUF insulation material in the Panel will have fire retarding and self extinguishing properties as per any international standard B2 DIN 4120 parts / BS 1735 self Ext. The roof panels at the junction will be joined by PPGI ridge cover on outside as well as inside. The roof panels will also have PPGI roof panels barge flashing. Since all the flashings are of PPGI hence no welding is allowed. The PPGI angle & flashing are tobe bended or / & riveted to form the desired shape & size. Providing and fixing 40 mm dia G.I. spout. 450 mm long Single "Y" with door 75x75x75 mm Providing & fixing asbestos sheets in joints of C.C. pavement 150 mm wide 4 mm thick. Providing & fixing asbestos sheets in joints of C.C. pavement 150 mm wide 6 mm thick. Providindg and fixing 15mm thick densified micro look edged ecofriendly light weight calcium silicate false ceiling tiles of approved texture (GLOBE or equivalent) fully perforatedand having backing of special accoustic mat of 32 GSM, of size 595x595mm in true horizontal level on suspended Silhouette profile grid system made from hot dipped GI sheet sections, rotary stichted double webbed powder coated white consisting of main 'T' runner of size 14mm x 42mm x 0.40mm thick GI sheet and croos 'T' of size 14 x 32 x 0.40mm GI sheet placed at 600mm centre to centre having width of flanges 14mm & with 1 6mm reveal profile (White / Black) and to form a grid of size 600mm x 600mm resting on periphery walls / partitions on a "W" profile wall section on pre coated steel of size 19mm x 15mm made of minimum 0.30mm thick GI sheet with the help of rawl plugs and wooden screws / dry wall screws as required at 230mm intervals and laying false ceiling tiles in the grid Main 'T' runners to be suspendeed from ceiling using G.I. soffit cleats fixed to ceiling with 6 mm dia and 50mm long dash fastners 4mm GI adjustable rods with galvanised level clips spaced as required all complete at all heights as per specification, drawings and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with necessary sections & suitably fixed all complete as per drawing and as directed by Engineer-in-charge. (Only false ceiling plan area will be measured for payment purpose. No deduction shall be made for exposed frames / opening (cut outs) having area less than 0.30 sqm.) Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. 10m to 13m
metre
metre sqm
12.36A 12.36A.1 12.42.3A 12.42.3A.1 12.54B 12.54C 12.54A
ROOFING ROOFING ROOFING ROOFING STEEL WORK
each each metre

metre
STEEL WORK
STEEL WORK
sqm
13.22A 13.22.1A
FINISHING
sqm sqm
FINISHING
13.22.2A 13.22.3A 13.22.4A 13.22.5A 13.22.6A 13.22.7A 13.26A 13.79.A
FINISHING FINISHING FINISHING FINISHING FINISHING FINISHING

FINISHING
FINISHING
13.60A 13.60A.1 13.28A 13.28A.2 14.73.A 14.74.A
FINISHING
FINISHING FINISHING
FINISHING
13m to 16m sqm 16m to 19m sqm 19m to 22m sqm 22m to 25m sqm 25m to 28m sqm 28m to 31m sqm Providing and applying Birla, J.K. white or equivalent wall putty of 1.5 sqm mm thickness over plastered surface to prepare the surface even and smooth complete Extra for addition of synthetic polyester triangular fibre of length 12 mm, kg effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement concrete / RCC/ Flooring/ Water retaining structure by using 125 gms. of synthetic polyester triangular fibre for 50 kgs. Cement used as per directions of Engineer-in-charge. Ceiling painting with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work sqm 12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement: 4 fine sand) : per metre Sunk Band of 50 mm wide (to be measured per running metre.) Providing, mixing and applying over reinforcement bars zinc antirust agent as per specifications and direction of Engineer-in-charge. (1 litre cover on average 4.5 sqm.) Chipping of unsound weak concrete material, removal of exiting treatment over chajjas and plaster from beams, columns etc. as with power driven (Hilti-TE 706 or pneumatic chisel) directed by the Engineer-in-charge upto 65mm depth including cutting chajjas to require shape & size. Introducting new reinforcement bars for structural connection in RCC beams, lintels, columns, including power drilling holes of appropriate dia. in reinforced or plain cement concrete to a minimum depth of 150 mm and upto 200 mm fixing the reinforcement in position using epoxy. (Rate shall include cost of Labour, T&P for power drilling in concrete epoxy cartridges, plastic nozzle etc. complete including cleaning the drilled holes of loose dust by blowing air. The cost reinforcement shall be payable separately upto and including bars of all dia.) Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per manufactures specifications and direction of Engineer-in-charge complete in all respects. (a) Expoxy adhesive (1kg cover 2.20 sqm) bound strength to exceed tensite strength of M-30 concrete. Providing and placing in position micro-concrete which shall be cement based per packed single component, chloride free, non shrink free flow, self compacting, rwady to use after mixing water in specified proportion obtained from approved manufacture as per specification and direction of Engineer-in-charge (payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument) M-25 as per the dirction of the Engineer-in-charge polymer used to have a minimum soiled polymer content cement of 6% weight of cement : upto floor V level. Providing and applying water based concrete cuning compound to concrete surface as per specification and direction of Engineer-incharge. sqm sqm
REPAIR TO BUILDING
REPAIR TO BUILDING
14.75.A
REPAIR TO BUILDING
each
14.76.A
REPAIR TO BUILDING
sqm
14.77.A
REPAIR TO BUILDING
cum
14.78.A
REPAIR TO BUILDING
cum
14.79.A
REPAIR TO BUILDING
14.80.A 14.81.A
REPAIR TO BUILDING REPAIR TO BUILDING
14.82.A
REPAIR TO BUILDING
Providing and applying upto 25mm thick cement based polymer modified mortar including toweling etc. complete in the required proportion or polymer cement and sand as per specification and direction of Engineer-in-charge polymer used shall have a minimum sailed polymer content of 15% by weight of cement strength on 28 days / 20 M / mm2 Providing, mixing and applying over reinforcement bars zinc antirust agent as per specifications and direction of Engineer-in-charge. Preparation of concrete surface of lightly sticking materials including foreign materials, loose concrete / aggregate etc. with the help of wire brush, chisel air blower machine, including cleaning the surface with clean water before applying epoxy to the surface at all heights. Propping and supporting the structural members and its adjoining areas with steel props (adjustable or as required), bracings, steel / timber runners etc. to relieve the structural member of required load coming over it as per the pattern given by the contractor & approved by Engineer-in-charge complete.
Cutting reinforcement bras in RCC carefully without damaging the existing structure and its finishes. (a) Bars of all dia. Cleaning reinforcement of total rust alkaline chemical rust remover with paint brush and removing loose particles 24 hours of its application with wire brush and throughly washing with water and allowing it to dry (a) Bars of all dia.
cum
cum sqm
each
14.83.A 14.84.A
REPAIR TO BUILDING REPAIR TO BUILDING
each sqm
16.74.1 16.74.2 16.74.3 16.75A
ROAD WORK ROAD WORK ROAD WORK ROAD WORK
16.76 16.77 16.18A
ROAD WORK
ROAD WORK
ROAD WORK
Moorum. Stone aggregate 20 mm nominal size. Stone aggregate 40 mm nominal size. Providing and laying C.C. pavement of mix M25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately). Deduct for using of M 20 grade concrete instead of M-25 grade concrete in C.C. pavement. Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material within all lifts and lead upto 1000 metre (by mechanical means). Providing & fixing G.I. barbed wire fencing 0.4 m high upto a height of 3.00 mtr.of wall with 1.65 mtr. angle iron 50x50x6 mmposts "Y" shaped placed every 3.5m c/c embedded in columns, provided with eight horizontal lines and two diagonals on both faces of "Y" interwoven with horizontal wires of barbed wire 9.38 kg per 100 metres (min) between the two posts fitted and fixed with G.I. staples, turn buckles, G.I. wire etc.complete. (cost of posts, struts, RCC columns to be paid for separately) payment to be made per mtr. cost of total length of barbed wire used: With G. I. barbed wire. Providing & fixing G.I. barbed wire fencing 2.35 m high upto a height of 2.50 mtr. angle iron 35x35x6 mm posts "Y" shaped placed at required distance welded with existing grill and provided with twelve horizontal lines and two diagonals on all three faces of "Y" interwoven with horizontal wires of barbed wire 9.38 kg per 100 metres (min) between the two posts fitted and fixed with G.I. staples, turn buckles, G.I. wire etc.complete. (cost of posts, struts, RCC columns to be paid for separately) payment to be made per mtr. cost of total length of barbed wire used:
sqm sqm sqm cum
cum sqm
16.18A.1 16.18B
ROAD WORK ROAD WORK
metre
16.18B.1 16.53A
ROAD WORK ROAD WORK
With G. I. barbed wire. Providing & fixing galvanised punched tape concertina coil 600 mm dia having 15 nos. round per 6.00 mtr length and galvanised spring steel corte of wire of 2.50 mm dia of steel punched tape of low carbon steel having series of sharp barbs confermly punched along its length with barbs on periphery crimped on steel springcore wire galvanised clips upto 3.00 mtr height of wall with existing angle iron "Y" shaped placed at 3.5 mtr. apart i/c tied to horizontal rows of G.I. barbed wire fencing with G.I. wire at required spacing to retain horizontal etc. complete all as per direction of engineer-in-charge. ( Cost of M.S. angle, G.I. barbed wire shall paid separtely). Laying Coal Cinder (Half burnt) after properly mixed with clay (3 part cinder : 1 part clay and veedified material) in mixer after breaking of clots, lumps etc to make a uniform mix, spreading the mix spreading to template up to required thickness etc. consolidation with light road-roller etc. consolidation with light road-roller etc. complete with required sprinkle of water.(payment for cinder,granomaxin and clay to be paid separately). Supplying and stacking at site. Clay earth. Coal Cinder (Half Burnt only of maximum size 4mm).
metre metre
16.5.A
ROAD WORK
cum
16.3.A 16.3.A.9 16.3.A.10 16.6A
cum cum
16.6A.1 16.6A.2 16.6A.3 16.78A
Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry work in head walls and parapets Clause 1106. (a) 450 mm dia. (a) 600 mm dia. (a) 1000 mm dia.
metre metre metre Setting out work complete with construction of benchmark(minimum 1 kilometre per Km.), working benchmark (minimum 4 per km), made of brickmasonary or concrete and reference pillars made of precast concrete poles/concrete (M 10) filled AC pipes @ 100 m interval or as required on both sides of the formation width, marking on centre line setting out curves and recording of central line levels and other required levels and distances etc. including setting out of cross drainage structures with required reference pillers and markings etc. as directed by engineer-in-charge. Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs , saplings and trees girth up to 300mm, removal of strumps of trees cut earlier and disposal of unserviceable materials and stracking of serviceable material to be used or auctioned, up to a lead of 1000 meters including removal and disposal of top organic soil not exceeding 150 mm in thickness as per technical specification clause 201.1. Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202.1 Cement Concrete Reinforced Cement Concrete hectare
16.79A
ROAD WORK
16.80A
ROAD WORK
16.80A.1 16.80A.2
ROAD WORK ROAD WORK
cum cum
16.81A
ROAD WORK
16.81A.1 16.81A.2 16.82A 16.83A
ROAD WORK
Removing all type of Hume Pipes and Stacking within a lead of 1000 m including Earthwork and Dismantling of Masonry Works as per Technical Specification Clause 202.1 (The excavation of earth, dismantling of Brick Masonary work in head walls to be measured and paid separatly.) ( a ) Upto 600 mm dia hume pipe. ( b ) Above 600 mm to 900 mm dia hume pipe. Dismantling Brick soling Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of tables 300.1 and 300.2 as per Technical Specification Clause 301.5 Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with all lead as per Technical Specification Clause 301.5 Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead upto 100 m as per Technical Specification Clause 301.5 Construction of unlined surface drains of average cross sectional area 0.40 sqm in soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3m and lead of 50 m (average lead 25 m) as per Technical Specification Clause 307 Construction of granular sub-base by providing well graded material using stone agregates, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification clause 401 - For grading I material. Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.85 kg/sqm using mechanical means as per Technical Specification Clause 502. Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M 30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick poythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501.
ROAD WORK
ROAD WORK ROAD WORK
running metre running metre cum cum
16.84A
ROAD WORK
cum
16.85A
ROAD WORK
cum
16.86A
ROAD WORK
metre
16.87A
ROAD WORK
cum
16.88A
ROAD WORK
cum
16.89A
ROAD WORK
16.89A.1 16.90A 16.90A.1
ROAD WORK ROAD WORK ROAD WORK
16.90A.1.1 16.90A.1.2 16.90A.1.3 16.91A 16.92A
ROAD WORK
(a) Cement Concrete Pavement. Kilometer and Boundary Stones :Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 for kilometer stone and IRC:26 for 200 m stone fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 (including fixing in plain C.C. grade M 10). 5th Kilometer stone ( Precast ). Ordinary kilometre stone (Precast). 200 m stone (Precast). Providing and laying filter material underneath pitching in slopes complete as per drawing and technical specifications Clause 1302 Providing and laying of boulder apron laid in wire crates with 4 mm dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm mesh (woven diagonally) including 10 per cent extra for laps and joints laid with stone boulders weighing not less than 25 kg each as per drawing and technical specifications Clause 1301 i/c gabions Supplying and filling in position with bed materials (having river bed singles (Balason variety) of sizes 10 mm to 100 mm mixed with coarse sand) in layer including watering ramming consolidating with road roller 8 to 10 tonnes capacity upto desired density and dressing as per CPWD specifications with machanical transport including loading and unloading all lead and lift all complete as per direction of Engineer-incharge. Cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete. Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap with metrapole flush valve dual flow concealed type with control cock operation plate - 40 mm size vide design "Cat No. 1089" of Jaguar make or its equivalent including cutting and making good the walls and foew wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. Providing and fixing white vitreous china pedestal type wall mounted water closet (European type) with seat and lid (Cat No. 20061 of Hindware or equivalent) , with metrapole flush valve dual flow concealed type with control cock operation plate - 40 mm size vide design "Cat No. 1089" of Jaguar make or its equivalent including cutting and making good the walls and foew wherever required : W.C. pan with ISI marked white solid plastic seat and lid. Providing and fixing C.P. barss towel ring (Cat No. 1121 N Jaguar or equivalent) of standard and of approved make. Providing and fixing sliding rail with soap dish (Cat CHR-1189) Jaguar or equivalent Providing and fixing towel rail 60 mm long (Cat No. 771) of Jaguar or equivalent. Extra for providing 100 mm dia sand cast iron long body 'P' trap in lue of 100 dia sand cast iron normal 'P' trap at Orissa pattern W.C. pan.
cum
nos. nos. nos. cum cum
16.93A 16.51A.1
ROAD WORK ROAD WORK
cum
16.42A
ROAD WORK
cum
17.1A
SANITARY INSTALLATIONS
17.1A.1 17.3A
SANITARY INSTALLATIONS SANITARY INSTALLATIONS
each
17.3A.1 17.72A 17.71A 17.73A 17.1B
SANITARY INSTALLATIONS SANITARY INSTALLATIONS SANITARY INSTALLATIONS SANITARY INSTALLATIONS SANITARY INSTALLATIONS
18.83A
WATER SUPPLY
Mobilisation charges of all necessary machinery equipments and with all required accessories belonging to the agency including it removal from side after completion of the work including clearness and dressing and leveling the site including mud pits complete as per direction of the Engineer-in-charge. Drilling / boring with odex method for 175 mm tubewell through any type of soil, boulder, rock as required at site for siking tubewell of required dia with top enlargement i/c higher charges & labour for supply of suitable dia casing pipe upto full depth ( Mobilisation of machine will be paid seperately) Supplying of 175 mm (internal ) dia "ERW" MS black pipe (electrically resistance welded) of approved make (5 mm thick) conforming IS: 1161-1968 heavy quality pipe with 2 coats of zinc chromate anticorrosive paint complete as per direction of Engineer-in-Charge. Supplying, fitting & fixing of LCG(low carbon galvanised) strainer 125 mm dia I/c packer. Supplying, fitting & fixing of Bell Ring at required upto 200 mm i/e. Cost of Labour Charges Supplying, fitting & fixing of top cap 175 mm I/c labour charges Supplying, fitting & fixing of 175 mm M.S. clamp with nuts and bolts as approved make. Washing & developing tubewell with Air compressor pump & engine for 8(eight) hours continuous pumping per day with necessary arrangements for testing the yield on gallons per hour with "V" notch including hire charges of labour & full charges for all tool and plants and scaffolding as required complete as per direction of the Engineer-inchareg. Labour for boring through any type of soil for sinking tubewell of required dia with top enlargement by rig boring system (either by reserve circulation or any direct rotary method) including hire charges and labour for rig machine, tools, and plants, stagging, force pumping set and making arrangement for water required for boring etc. complete and lowering of pipes, strainers, blind pipes etc. complete. For depth upto 260 meter for 150 mm dia Tubewell with top enlargement of 200 mm dia (upto 50 mtr.) From G.L. to 50 mtr below ground level From 50 mtr. to 160 mtr. below ground level Supplying of 200 mm dia E.R.W (Electrically resistantce welded) MS black pipe having wall thickness 8 mm of approved make (Heavy type) of approved make conforming to IS: 1161-1968 painted with 2 coats of zink chromate anti-corrsive paint complete as per direction of the Engineer-in-charge. Supplying of 150 mm dia E.R.W (Electrically resistantce welded) MS black pipe having wall thickness 5 mm of approved make (Heavy type) of approved make conforming to IS: 1161-1968 painted with 2 coats of zink chromate anti-corrsive paint complete as per direction of the Engineer-in-charge. Supplying of 100 mm dia E.R.W (Electrically resistantce welded) MS black pipe having wall thickness 5 mm of approved make (Heavy type) of approved make conforming to IS: 1161-1968 painted with 2 coats of zink chromate anti-corrsive paint complete as per direction of the Engineer-in-charge. Supplying MS male/ female adopter of approved make and brand for coupling of MS pipe and fibre grass strainers as per direction of the Engineer-in-charge of 150 mm dia.
Job
18.83.B
WATER SUPPLY
metre
18.83.C
WATER SUPPLY
metre
18.83.D 18.83.E 18.83.F 18.83.G 18.83.H
WATER SUPPLY
metre No. No. Pair Day
WATER SUPPLY
WATER SUPPLY WATER SUPPLY
WATER SUPPLY
18.84A
WATER SUPPLY
18.84A.1 18.84A.1.1 18.84A.1.2 18.84.B
WATER SUPPLY
WATER SUPPLY WATER SUPPLY WATER SUPPLY
Meter Meter metre
18.84C.1
WATER SUPPLY
metre
18.84C.2
WATER SUPPLY
metre
18.84.D
WATER SUPPLY
Nos.
18.84E
WATER SUPPLY
18.84E.1 18.84E.2 18.84E.3 18.84E.4 18.84E.5
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
WATER SUPPLY
Supplying at site including fitting and fixing of the following accessories including to the pipes/ Housing pipes specified in details below inclusive of two coats of bituminous paint on all sides complete as per direction of the Engineer-in-charge. M.S. reducer of approve type for jointing the housing & well pipe 200 x 150 mm dia. M.S. reducer of approve type for jointing the housing & well pipe 150 x 100 mm dia. M.S. top cap of approved type for closing the housing pipe above G.L. 200 mm dia. M.S. top cap of approved type for closing the housing pipe above G.L. 150 mm dia. M.S. clamp for holding the housing pipe at GL made for M.S. Plate (125 mm side & 20 mm thick) with two drilled holes on both side for insertion of 4 nos. bolts with nuts each 75 mm long & 20 mm dia with washer etc. Providing 200 mm centre guide. Providing 150 mm centre guide. Packing annular space between the outside of the housing pipe and the bore with puddles clay balls of approved size as per direction of the Engineer-In-Charge with cost of materials and labour complete. Durgapur variety Siliguri variety Supply of fibre glass reinforced epoxy resin slotted strainer of 1mm slot width in 6.1m length of approved make and as per direction of Engineer in charge 150mm nominal dia 6mm wall thickness Supply of fibre glass reinforced epoxy resin slotted strainer of 1mm slot width in 6.1m length of approved make and as per direction of Engineer in charge 100mm nominal dia 6mm wall thickness Fitting, fixing, jointing and lowering the whole assembly of pipe in to the bore well the MS pipes and Strainers as per direction of the Engineer-incharge. (Cost of pipes, strainers, welding etc shall be paid for separately) 200 mm/ 150 mm pipes/ strainers 150 mm/ 100 mm pipes/ strainers Jointing by the welding at edge of socket with the housing pipes including supply of electroded and necessary tools and paints. For 200 mm dia For 150 mm dia For 100 mm dia Providing and fixing bell plug as required upto 250 mm (Internal) dia E.R.W (Electrically resistantce welded) MS black pipe including cost of materials and labour complete. Providing and fixing bell plug as required upto 150 mm (Internal) dia E.R.W (Electrically resistantce welded) MS black pipe including cost of materials and labour complete. Supplying at site fitting fixing M.S. socket threaded on unthreaded or jointing the tubewell pipes and housing pipe. For 200 mm dia For 150 mm dia For 100 mm dia Extra for removing the rig with all scaffolding from one location and thereby re-assimbly of the same at other loation (Within the same campus) complete with labour charges as per direction of the EngineerIn-Charge.
Nos Nos Nos Nos Nos
18.84F.1 18.84F.2 18.84G 18.84G.1 18.84G.2 18.84H.1 18.84H.2 18.84.I
Nos. Nos. Cum
Cum Cum metre
WATER SUPPLY
metre
WATER SUPPLY
18.84.I.1 18.84.I.2 18.85A 18.85A.1 18.85A.2 18.85A.3 18.85B.1 18.85B.2 18.85C 18.85C.1 18.85C.2 18.85C.3 18.85.D
Meter Meter
WATER SUPPLY WATER SUPPLY WATER SUPPLY WATER SUPPLY
Nos. Nos. Nos. Nos
WATER SUPPLY
Nos
WATER SUPPLY
Nos Nos Nos 1 Job
18.85.E
WATER SUPPLY
Providing and making a base platform 1500x1500 mm allround the tubewell upto a height of 300 mm with cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 Graded stone aggregate 20 mm nominal size) neatly finished with cement mortar complete as per direction of the Engineer-InCharge. Packing the annular space between the outside of the tube well pipes and strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engineer-in-charge including cost of all materials labour and equipment (Initial 6 m of annular space between the housing pipe and the bore should no be shrouded with pea size gravel to avoid contamination with surface water) North Bengal Variety Durgapur Variety Siliguri Variety Ground water investigation through Resistivity Test (2 point minimum)
Nos
18.86A
WATER SUPPLY
18.86A.1 18.86A.2 18.86A.3 18.87A
Nos Nos Nos 1 Job
22.22.A
WATER PROOFING
22.23.A 22.24.A
WATER PROOFING
WATER PROOFING
22.20A.1
WATER PROOFING
Providing injection grouting treatment for overhead water reservoir for Each Hole water proofing by setting rubber nipple @ 500 mm. C/c all over the base and vertical wall upto 1 mtr. height and @ 750 mm. C/C on vertical wall beyond 1 mtr. height and injecting cement slurry admixed with Sika interplus EP as per manufacturer specifications. Providing and applying 2 coats of Sika top seal 107 after preparation of Sqm surface. Treatment consumption of materials should be as per manufacturers specifications. Providing 12 mm. thick cement plaster 1:3 over 20 mm thick cement Sqm concrete 1:1:2 (1Cement : 1coarse sand : 2 stone chips of 6 mm size) mixed with Latex and water in the ratio 1:10 (1Latex : 10 Water) both in concrete and plaster and neat cement punning complete. Providing and laying APP (Atactic Polypropylene Polymer) modified sqm prefabricated bitumen membrance 3 mm thick with a non woven polyester reinforcement black finish with a very thin Polyethylene film on both side, manufacture of density at 25 C, 0.89 kg/ltr & viscosity 70160 cps consisting of a coat of bitumen primer @ 0.30 litre per sqm and a foundation coat of hot oxidized bitumen grade 85/25 @ 1.20 kg per sqm. over the foundation coat of bitumen graded 85/25, the layer of 3 mm thick membrance shall be laid with and seling all joints etc. and ensureing complete thermo fusion after complete the laying of membrance, a final coat of hot oxidized bitumen grade 85/25 @ 1.20 kg per sqm shall be laid over top surface of membrance for protection as per manufacture specification. The vital physical and chemical parameters of the membrane shall be as under. Joint strength in longitudunal and transverse direction 23 C as 650/450 N/5 cm. Tear strength in longitudunal and transverse direction as 300/250 N. Softening point of membrane not less than 150 C, cold flexibility shall be upto (-) 2 C when tested in accordance with ASTM D-5147 (The laying of membrane shall be got done through the authorized applicator of the manufacturer of membrane), I/c spreading of sand at top surface etc. complete as per direction of the Engineer-in-charge.
Rate
Justified Cost
Back to Main
3786.95
3786.95
287.40
287.41
181.25 2.65 12.10
181.26 2.63 12.08
129.35
129.35
197.75 345.20 490.10
251.83
130.80
130.78
211.00 378.80 491.95
270.09 434.33 554.80
101.40 165.60 258.55 135.00% 347.00%
101.39 165.60 258.54
142.95 353.95 407.30 222.55 549.80 634.15
421.94
276.05 683.50 786.50 105.00% 262.00%
101.85 106.20 115.95
104.90 114.15 123.85
90.25 95.30 100.75 1329.05
59.50 55.25 59.65
44.90 49.20 54.85
30.60 33.65 38.40 683.85
20.00% 25.00%
83.80
83.80
34.60 62.00
34.58
749.30
647.55
935.25
939.95
43.15 65.85 136.95 170.90 482.00
247.00
148.20 654.95 3026.30 6071.30
185.95
11.80
17.70
88.25
13.30 127.75
25.35 110.75 83.80
5961.50 4407.85 3631.95 2971.80 2616.35 2311.70 4863.85 4145.55 3485.40 3129.95 2825.30 4678.60 4749.85 3001.55 9509.85 7587.15 5171.55 301.10 2111.30
5899.10 4324.64 3538.20 2878.08 2522.63 2217.96 4964.64 4051.80 3391.68 3036.23 2731.56 4595.39 4595.39 2827.58 9426.64
6143.55
6013.81
4904.95 4514.05 4404.05 4024.00 3888.20 3626.15 3593.30 3331.25 3357.40 3087.45 3477.65 3199.65
4775.24 4378.20 4154.83 3880.56 3744.08 3744.08
3213.26
6901.90 5663.30 5272.40 4162.40 4781.40 4646.55 4384.50 4112.05 4423.74 4921.38
166.90 285.15 365.60
4514.05 4024.00
5203.10 4813.20 4323.50
4712.80
7430.10 6940.05
5626.20 5400.80 465.80
207.55 254.70 35.35
202.13
35.34
96.65
96.50
539.35 325.10 128.10 338.75
322.74
53.00
52.99
4969.95 4847.75
5358.30 5236.10
5086.95 4964.75
5475.30 5353.10
6333.40 5094.85 4703.90
6348.64 4965.12 4568.08
6974.30 5735.75 5344.80 5494.15
6844.60 5606.03 5208.99 5143.55
5181.25
5684.55
5419.40
4537.00
5442.00
5312.27
166.90 285.15 311.20 311.20 262.25 365.60 326.30 290.90 866.70 417.85 285.15 205.15 470.10 20.00% 166.90
166.87 285.14 311.22 388.91 244.88 335.60 325.40
864.29 417.12
468.69
99.45 441.10 495.50 398.35 411.10 488.05 459.00 409.47
125.95
139.85 153.80 174.70
121.65
121.64
4941.05
5321.85
8488.65
6754.00
9872.85
6960.44
5897.50
598.15
598.17
523.80 483.15
7259.65
4941.60
349.90
56.75 58.15 62.25 62.25 73.40 62.25 62.26 58.15
56.75 58.15 62.25 62.25 73.40 62.25 101.00 70.85 62.26 100.23
322.15 522.65
322.13
167.35
430.30
96.80 130.00
312.35 437.30 22.25 325.10 437.31 22.23
128.10
5242.15
5781.50
63.20 126.45 186.90
589.80 589.80 14097.20
5590.60 6130.00 5764.60 5634.89
151.00 34.85
151.00 34.85
5519.40 6059.20
106.80 97.00
115.65 155.70 216.55 300.75
351.05
559.85 815.40
3508.25 3316.55
2743.77 2575.09
3370.55 3201.90
4593.40 4118.80
4067.85 3876.15 250.45 80.60
3303.36 3134.68 250.45
135.05
372.00
6384.10
7555.35
417.85
438.40 416.95
386.35 353.06
498.35 476.85 22.20 63.30
412.98
5520.30 5213.60 5755.10
5804.20
8165.45
9299.70
379.10
316.45 325.10
128.10
3390.90 3979.20
3225.50 3785.10
3480.05 4039.60
3713.15 4252.75
4057.40 4617.00
3593.15 4152.75
4102.05 3910.35
4147.20 3978.50
4316.85 4148.20
3794.80 6221.65 4508.30
730.90
49.65
4871.10 4679.45 26.05 24.75
524.60 503.10
590.20 568.75
3059.20
2535.96
3615.35
261.35 812.75 328.05
3468.80
3255.25
4017.70 3804.10
289.90 919.15 356.10
22285.00 23060.00 28507.00 29282.00
26021.00 26795.00 32244.00 33017.00
38362.00 39136.00
53528.00 54302.00
21366.00 22141.00 26668.00 27442.00 574.00
1552.00 1080.00 417.85
30116.00 30891.00
2024.00 5736.00 16.60
2015.55 1919.85 1824.35 1728.45 1632.70
2618.85
2523.15 2427.65 2331.75 2236.00 2069.75 1966.30 1863.10 1759.20 1655.90
2673.05 2569.60 2466.40 2362.50 2259.20 1552.00 524.10
30.60 27.40
1011.55
1035.50
619.70 640.60 652.65
2218.65
29914.00 30690.00
6798.15 6817.30 325.10
128.10 1192.45
1177.50
1466.35 1234.20 65.85
1989.40 2048.35
119.00
171.20
2222.90 2314.10
2215.53
1894.75 1980.80 3041.15 3083.40
1977.51 3038.54 2963.51
105.70 178.75 185.80 281.10
105.72 178.74
281.08
163.10
492.70 524.10
22.05 24.70 38.95
1207.90 1606.70
2670.75 2942.05
85813.30 68648.90 46619.45 86951.10
85690.63 68526.24 46496.63
65549.90 43393.20
8581.10 6865.00 8661.45
2434.05 2162.65 1445.30 1310.60 2260.70 2000.75
2431.29 2160.28 1442.53
2300.75
2475.00
2382.10
1950.35 1149.35 1669.85 1409.40
1919.00
1507.95
775.85 994.10 1289.75 1332.00 1270.49
1194.00 919.25 1113.40 1339.90
2955.90 2645.70 1830.40 1676.50 2758.75 2475.80
2952.75
2068.45
162.80 5.80
63.90
97.45
142.05 44.65
2440.25 2457.15
2463.25 2423.35
488.10 568.95
568.93
1099.80 1187.80
1182.55
2159.05 1984.80
2135.73
1789.45
1766.11
1578.30 1404.05 1266.75
1554.98
371.70 325.20
127.75 197.45
336.85 92.90
92.92
2737.90 1741.20 2563.20 2835.35 1838.65 2660.65
2412.70 1560.65 2263.15 2510.10
1657.95 2360.60
2126.55 1842.00 17.40
12.90 14.95 18.45 20.75
4525.00 2922.80 2361.20 1506.70
2358.26
1059.90 1213.25 1302.65
84413.10
975.15 796.70
1395.40 1484.80
98.40 135.70
98.32
70.05 88.40
1589.10 298.45
291.50
406.75
28.80 84.55 38.35
243.15 324.45 417.35
416.02
107.10 117.55
90.75 98.20 837.95
1033.85
758.20 484.75 139.40 96.75 96.01
63829.70 41315.00
28.15 21.45 17.10 9.10
50.25 30.70 19.75 12.00
29.25 21.45 16.85 9.30
50.75 48.40 39.70 34.15
147.35 141.55 116.45
153.15 147.35 122.25
130.25 129.10 140.75
142.35 129.85
128.72
55.50 48.50 35.80 29.40 60.15
54.86 35.82 29.38 60.14
60.35 54.55
23.75 21.25 20.10
23.75
20.05 17.30 14.40
29.80 25.85 24.70 75.45
29.81
57.65 50.60 34.30 21.65
66.95 52.35 40.10
368.45 124.55 325.10 98.60 121.85 63.75 27.15
326.25 291.40 256.55 204.30
280.70 219.30 178.65 117.55
200.60 189.00
472.25 414.20 588.40
472.26
141.25 147.05 152.85 176.10 40.20
169.60 151.85 117.00 73.40 662.80 662.80
981.75
60.35
60.18
149.05 124.20 112.60
93.25 79.30 67.70 646.50 646.50
137.75 147.05 161.00 185.35 57.65
192.80 169.30 146.05 113.55
171.60 148.40 125.15
171.61
98.70 94.05 83.70 82.50 81.35 73.40 70.50 63.55
82.52
203.80 168.95
203.80 168.01
100.40 86.45 71.05 59.00
85.68 71.05 58.55
46.25 62.45
46.24 61.36
155.35
62.50 49.55 41.90
62.03 49.57
28.60 71.55 62.40
71.09
706.15
55.85
1145.70 983.10 1129.45
1089.95
38.60 43.25
58.90
77.20
81.30 100.30 33.60 328.90
170.95 44.15
410.00
21.90 18.45 177.50 11.10
185.15 177.05
2471.10
2587.25
2587.23
2500.15
404.60
404.60
2499.20 2958.00 445.25
2499.19
2139.15
2441.10
334.90
334.91
2609.55 3050.90 632.40
1457.70 1506.25
756.05 596.30 4560.40
1442.80
1419.47
1239.50 1146.60
1179.80
400.75
854.55
644.95 586.15
3139.75 2143.05 2965.05 3237.20 2240.50 3062.50
2814.50 1962.35 2665.00 2911.95 2059.80 2762.45
1433.75 1160.30 1161.45
5727.20
25435.15 5873.25
861.05 544.50
2579.65 3100.00 389.60
2703.40
400.05
2790.50
373.75 357.90 394.50 82.70 113.15 425.00 455.50 152.20 494.60 454.40 118.85 152.20 478.90 587.15
118.85 152.20
271.60 329.70 416.80 474.90 591.05 179.70 121.60 63.55 98.35 121.60 80.85
59.90 66.50 4234.25
59.90 66.51 4234.04
2996.40
2551.45 2427.15
1840.85 1583.40 1476.90 429.85
1840.86 1583.39 1464.50 429.87
627.35 662.20 261.35
27.55 15.00
96.30 68.75 29.25 68.59
73.30 70.40
72.72
346.75 339.85
370.00 363.10
361.02
404.85 397.90
121.45 114.30
85.10 97.30 105.85 106.30
117.45
67.80
86.55 111.80 2.20
2.19
67.20 77.90
66.82 77.89
86.45 109.95 93.30
84.30 93.21
54.95 59.90 74.20 81.30 103.00 558.00
458.95 1134.50
657.75 836.65
489.20 455.90
435.85
339.55
280.05 420.50
274.61 402.99
464.80
456.38
258.20 5269.10 24.10
255.67 5133.30
462.50 500.40 480.65 478.50 467.45 443.10
457.37 569.11
462.32 437.95
478.45 532.50 504.30 503.25 485.50 451.60
501.65 577.40 537.85 530.40 511.55 464.55
603.75 641.65 621.90 619.75 608.70 584.35
600.69
605.63
29.40 26.75
28.94
773.45
730.76
769.35 722.30 677.10 639.25 32.90
966.85 909.10 854.05 806.40
846.00 773.40 709.00 671.30
953.20 789.55 602.15 564.35
950.80
561.95
1075.60
1129.95
748.15
3008.45 1265.35 1993.30 1165.15 1418.95 1352.15 197.75 230.55
1258.24
1419.53
945.70 954.10
937.21 946.47
462.20 481.40
538.30 557.50
591.40 610.55 52.45 12.10 52.44
3049.05 2045.60 5455.30
77.50
724.25
711.93
764.55
751.14
772.90
770.27
931.50
918.07
961.25
958.63
1182.35 1337.10 1579.40 2246.10 360.15 336.75
1323.70
347.25
1651.20
1184.40 1339.20 1583.25 2249.95
1419.05 1573.85 1817.90 2484.60
194.25 164.10 133.95 98.00
1372.90 1527.70 1771.75 2438.45 7.15
878.45 742.80 627.25
31.80 25.45 25.45
183.95 146.95 146.95
470.10 411.40
893.95
350.10
439.05 390.15 375.75
25.45
70.35 109.30 109.30
316.00 316.00 360.45 427.35
288.30 198.95 424.35 522.50 517.35 189.40 671.35 287.30
46.40
105.50
375.60
402.10 8.65
283.65 431.90
109.05 148.75
390.40 415.95
508.20 623.20 565.70
578.00
395.30 345.65 165.75 180.05
172.90 140.20 143.40 124.05 588.70
360.05
676.15 771.60 189.25 73.55 431.70
226.10
200.90 232.85
68.10
112.50 121.80
207.85 287.10
407.85
124.90
124.92
206.90
201.85
97.60 130.25
130.26
116.15 163.95 207.95 302.05 184.70 241.65 104.55 156.95 163.80 287.05
241.67
156.97
287.06
127.15 144.60 32.75
127.16 127.16
691.40 785.30 826.80 1626.80
96.65
932.50 822.05 249.65
127.00 601.75 608.02
620.75 602.50 648.65 567.05 620.85 750.70
620.77
697.46
1425.90
1538.60
1029.60
1048.20
123.50 112.50
121.95 110.91
143.35 130.20 173.30 156.15
141.49 128.30 170.88
132.10 121.05 153.60 140.45 186.70 169.50
130.54 119.50 151.75 138.56
164.50 153.45
162.93 151.89
186.50 173.30
173.10 233.80 196.75
171.52 194.88
182.90 198.25
152.05 177.45 217.75 215.56
101.00
100.23
136.25 31.10
135.48 31.12
315.30 300.15
37.40
28.85
28.85
13.65 20.90
7.78
195.95 322.40 50.90 55.50 33.35 83.80
83.14
31.35
2.35 2.55 2.85 4.70
2.32 2.52
2.90 3.15 3.55 6.35 6.40
78.35 126.90
78.01
107.35
111.80 201.85 219.30
63.75 4.65
11.75 4.75 16.15 15.85 46.30
11.73
66.70
66.69
37.35
36.60
27.55
27.56
44.95 117.70
44.68
67.50
67.21
80.45
80.20
78.75 67.70 70.40
25.85 24.70 20.70 11.40
25.48
20.63
48.95 77.85
105.50 108.55
59.35
58.56
20.15 19.95
25.60 38.20
28.90 43.10
18.70 267.15
24.55
60.25
58.86
53.85
53.62
78.80
78.46
47.70
50.50
44.55
44.31
57.00 80.60 81.60
137.45
137.46
60.50
28.50 1.70 417.35
23.65 24.10 65.85 41.15 72.15
81.30 214.40
53.00
52.99
76.05
21.25 34.40
37.65 56.60
40.75 61.45
35.70 53.90
27.40 24.30 25.55
186.40 197.35
600.10 367.05 267.90 131.55
366.65
585.20 764.10 724.65 903.50 610.80 789.65 29.85 24.35 17.25 224.45 190.40 190.10
585.23
9.95
206.30
459.10 63053.20
64870.70 42131.00 65676.30 42912.50
19.85
42.65 43.55 1.45 55.45
120.25
111.15 170.45 72.55 301.10
2583.60
3069.85 2532.10
3193.30 2615.20
2714.20
187.45 210.65 62.00
118.27
62391.40 39881.50
387.40 329.30 209.45
619.70 445.45 383.65
176.85 152.40 111.75 197.30
83.55 80.65 74.85 71.95 60.35 32.45 42.90
147.45 379.65
129.20 104.45 128.90
67.90 29.10 177.45
136.50
7.05 4.35 5.70 21.25
23.40 7.50
30.30
19.10
9.30 12.20 17.40
19.90 28.25 42.10
9.75 12.55 17.85
14.25
39.30
35.20
35.19
30.75
33.15
29.80 69.80
30.80 1.10
31.95
44.15 45.30
21.35 41.65 28.40
99.50 59.90 48.30
31.65
62.20 40.30
33.85 34.40 64.20 32.00 127.10
373.15 42.10
370.87
234.20
128.45
671.05 413.65 978.95 874.50
325.15 2.60
194.00 489.50 234.20 566.60
1277.55 1474.15 1841.60
318.95 676.05
403.50 790.80
131.50 189.55
101.70 139.85
39.70 52.45
1231.15 4.90
172.65
0.50
245.90 0.95
0.95 0.65 1.55 1.05 0.25 0.25 1.25
20.30 31.25 363.35 73.70 29.05 251.40
45.70 21.60 736.90
70.25
58.20
16.10 5.75
76.00 87.35 7.20 10.15 18.00 21.10
17.15 21.85 25.85
80.40 120.35 15.85
20.80 21.50 22.15
61.70 119.95
44.10
50.30
155.45 198.70 250.40
204.75 508.80
91.05 110.65 198.25
116.50
1298.15
269.70
261.90
95.10 331.85 198.90
303.70 465.95 659.30 15.00 15.90
1075.90
166.70
101.75
61.25
61.26
7.75
1010.75 1100.80 1190.80 493.90 528.75 1338.75 1425.85 1147.10 260.70 624.45 330.15
900.16 990.18 1080.20
1237.00 1324.11
133.54 331.02
246.35 246.35
11.65
84.25
23.80 10.90 105.20
22.47
336.50
292.40
1861.60 989.25 92.40
16302.45
64.55 135.15
7.60
11.60 62.10 20.65
10.36 62.12
3.00 111.30 380.55
1473.95
2722.25 991.25 145.80
197.35
120.45
106.80
68.25
40.15 29.00
40.08 28.93
14.25 9.40 14.50 9.55
135.00 134.00 136.70
164.75 163.50 166.85 124.15
150.90
355.30
505.60
728.05 1164.85
225.65 223.50 229.15
346.85 345.45 352.45
61.30
80.15
78.84
4502.55
4366.16
5619.50 5967.95 43.00 2.40
5132.89
1.65
94.90 58.95
95.75 62.10
1495.55
234.00
535.60 5211.10
269.20
8331.55
8095.65
6374.25 6149.90
208.15
202.25
9077.05
9558.65
9513.50
9122.20
8836.20
9317.85
9272.70
8881.40
4580.35 3298.40
4516.50 5061.65
505.80
291.95
97.55
562.55
19.75 502.20
536.65
5046.80
486.20 519.15 586.25
607.55 181.05
51.95 105.35 97.35
6067.10
164.95 2.90
1940.80 1990.65 1975.10 1960.60
2896.15
1078.65
10.80
36.35
159.20
32.10
2964.10 6309.20
2917.51
2885.10 2865.35
2854.47
4220.80 4201.05
4174.22
2844.40 4652.80 6229.90 8528.75
2844.40
5354.50 8445.00 11046.80 11046.82 13541.25
3529.35 5152.40 6826.65 8272.05
1848.35 1628.95 1679.95 1460.50 1518.60 1315.35 1338.55 3218.95 2500.05 2807.85 2552.35 894.70
1824.97 1628.95
2206.95
6743.55 6453.15 5640.10 4130.15 3934.30 3702.00 2888.95 3934.30 3678.60
1939.80
2758.65
896.55
759.70 1235.95 609.80 1154.65 1173.10
1154.64
139.45 151.10
831.90 887.35
1474.10 1967.75
383.25 363.50 574.90
94.00 792.60 1537.85
893.55 725.15 783.25 579.95 603.20 1265.25
1656.65
1041.05 1859.95
59.50 66.45 65.30 67.60 24.60 34.50 674.05 666.87
731.30 598.30 642.80 1211.00 341.25
250.95 259.75
734.30 857.30
734.31 851.77
656.60 744.50
656.62 740.37
47.55 56.00
112.50 110.15
112.36
310.30 353.25
353.26
248.65 281.15
267.30 296.35 216.15 221.95
296.35
221.94
301.00 342.80 251.00 297.45
655.05 747.95 490.25 583.15
655.03 724.78
592.55 679.65 407.80 541.35
446.20 579.75 333.45 438.00
556.36
437.98
383.45 522.85 297.45 378.75
522.84
678.50 1026.95
1003.54
615.75 929.35
492.65 771.40
429.90 673.85
666.14
615.75 633.20 462.35 489.10
472.90 482.20
474.50
355.50 370.60
656.40 836.45
564.65 609.95
268.40 304.40 337.00 435.70 420.15 542.10
268.40 341.50 457.65
446.20 469.40 325.30 333.45
240.60 244.10 177.80 221.95
177.85
238.25 132.50 169.65
207.85 176.50 141.65
205.38 176.48
61.70 52.35 45.45
801.70 651.85 838.85 576.35
796.96
834.13 548.23
252.10 180.40 114.90 338.10
237.35
100.60
28.75 22.00
14.30 10.70 293.35
10.71
5744.30
94.35 109.45
403.30
435.30
180.10
169.85
375.70 415.20 452.35 159.20 1208.60
123.15
168.00 205.50 242.90
9444.35
19178.40 14961.65
187.75 224.55 277.95 362.85 559.65 597.40
297.95 340.60 405.65 507.30
181.15 212.85 261.20 336.70 521.00 558.75
100.20 132.45 176.80 258.70 387.55 523.45
180.05 216.65
269.50 367.05
93.60 120.75 164.00 236.45 348.90 484.80 737.45 1031.90 1626.80 1702.30 3538.25
133.95 157.15 197.90 252.65 348.25 514.35
218.65 243.05 297.95 358.90
122.25 140.40 185.15 230.45 309.60 475.70 1326.35 1854.85 2563.00 4466.85
161.60 188.05 243.15 296.50 364.10 453.65
161.46 187.91 242.90 296.16 363.74 453.13
229.10 251.30
228.42 249.55
142.25 161.25 209.40 248.55 294.20 355.95 453.55 573.40 209.20 293.89 355.49 452.92 572.58
277.35 630.15 228.55
630.16
205.60
205.60
266.15 205.60 266.65 205.60
372.95 450.90 546.05 780.60 1073.25 1832.95
780.62 1073.25 1832.95
258.05 360.20 421.65
383.45 395.05 490.25 594.80 620.25 817.70 936.35 1110.55 1681.95 1949.10 2392.95 3089.85
203.30 250.10 331.25
51.35 59.50 61.70 73.35
58.15 77.85 101.70
186.10
4202.35 4318.50
4193.28
6351.10 6699.55
6342.06
986.40 1237.15 1476.70 2516.30 3360.20 4437.80 5346.45 6965.85 8425.25 9787.20 13576.25
984.18 1473.01 2510.29
150.00 220.65 225.10 298.65 372.70 448.75 463.85 604.35 676.85
225.09 372.73
716.75 965.35 10462.55 10453.50
92.65 155.25 165.70 192.80 198.65 297.20
154.54 192.82 197.96 296.26
306.50 408.30 657.35 814.95 893.15 1059.15
306.48
3068.35 3498.30 3461.15 4181.45 4487.75 5200.40
3062.97 3469.50
4481.28 5192.62
8242.25 8229.86 11260.60 11232.01 12037.80 11412.80 16723.30 16680.39 16766.25 20950.60 20897.60
908.95
640.69
5392.90
4452.91
9277.10
7469.45
12866.45 10390.09
5106.65
4129.13
4925.60
7.35 8.65 11.40 13.45 16.00
16.13
15.94
18.80
18.72
3.75 4.35 5.60 6.60 7.70 9.00
4.40 5.15 6.60
7.80 8.90 10.55 12.95 15.00
54.75 55.50 56.95 58.45
47.22
59.20 61.40 96.95 99.90 105.80 157.60
52.96 83.59 86.15
259.25 308.20 359.15
479.25 275.15 733.55
119.60 142.85 154.45 189.30 229.95 307.70 551.60 656.15
142.85 154.47 189.31 229.97 307.70 551.61 656.15
259.65 282.90 294.50 329.35 370.00 498.65 742.55 847.10 6.10
5.48
397.50
397.51
411.40
411.42
430.60
430.60
426.55
426.55
449.35
449.33
130.10 176.55
199.80 168.45 130.10 164.95 214.90
202.25 277.25
118.50 106.85
43.20 50.15
124.50
4018.15 5830.10 7602.35
7601.64
2880.60 4329.20 6132.00 6860.90
3340.90 5300.55 6860.90 9436.60
193.00 273.05 543.65 961.75 1391.50 164.95 112.75 151.10
487.83
164.94
6989.95 8906.40
9719.45 10509.25
13958.95 13932.11 19104.40
14760.35 14732.51 20614.30
49.25 79.05 121.65 146.80 194.05 221.95 317.05 413.65 448.85 570.10 820.55 929.75 1005.35 1310.85 1594.70
35.33 79.03 121.63 146.81 194.06
1493.15 2325.20 3752.65 4427.80 5662.80 7214.85 9354.10 11775.05 14654.50 18163.60
840.25 1229.05 1680.15 2278.60 3123.85 3723.25 4413.65 5241.05 6189.20 8077.40 10379.50 13242.40 17320.75 18414.10 946.00 1389.40 1895.40 2502.35 3184.95 3841.75 5169.15 6043.80 7334.45 8838.45 11919.00 13485.35 14272.15 16696.70 18754.40
838.01
1385.67 1889.36 2493.78 3174.35
2376.45 3318.10 4395.00 5801.00 7440.60 9423.00 11332.70
3314.40 4388.97 5792.42 7430.00
13715.20 16314.30 22029.20 27318.00
59.50 67.55
43.00 50.00 72.05
152.00 143.95
63.60 102.80
524.55 689.60 863.55 1041.00 1398.35 1773.25 1996.10 2230.70 2482.85 2742.75 3020.15 3596.85
192.80 235.25 287.90 337.35
510.60 594.86 677.25 800.55 926.50
1058.15 1191.55 1468.35
150.70 155.55 160.00 164.60 181.90 198.65 213.10 226.35 238.15 250.40 260.65 277.65 41.35 55.65 77.65 104.70 139.65 173.10 208.05 241.45 276.20 309.80 344.55 409.80
6776.80
150.10 219.05 323.05 446.15 597.85
216.00
496.90 607.70 708.40 819.20
475.56 581.60
236.15 382.75 449.90 523.75 604.35
1256.35 1293.60
1278.30 1315.55 1365.55 1402.80
24.40 26.95 28.70 30.40 32.15
37.00 40.45 42.15
218.35 254.50 342.45 422.90 620.85 722.20 1084.25 1415.50 1415.70 1678.85 2111.10 2554.80 2694.55
412.17 595.82
7132.00 7229.45
6703.72
15322.95 15589.40
#REF!
19778.80 20008.05
4061.70 4345.40 4866.75 5204.90
2716.34
e 120x90 cm 3237.65
7007.40 7162.50
3498.25 3735.75
12943.40 13316.30
4522.30
4832.30
26873.70 27934.70
10643.40 11445.10
227.95 193.15 256.75 192.55
262.30 227.45
1185.05 2624.65 5289.10
1185.07
1017.10 867.40 820.95 987.65 907.65
1390.25 1529.65 245.55
275.00 333.15 487.20
4700.30 6775.45
1577.20 2167.60
705.60 1238.05 2342.20 1795.30 564.10 671.75 543.60 613.10
1239.70 1942.20 1807.75 169.75
3193.50
3451.90
6111.70
3917.65
3572.17
4556.55
5259.10
2824.45
3081.70
3589.25
15228.15 12784.33 1591.35
248.55
1750.65 2152.10 2596.20 2798.75 3526.35 7689.70 9836.65
1428.85
13714.35
1382.15 1613.95 2154.40 2526.55 3310.90 4723.60 7809.25 10079.80 14300.30
2007.05 2383.65 2608.20 2873.00
1341.85 1509.90 1611.45 1776.55
2172.30 2562.40 2724.50 3007.90 5436.20 7315.50
38561.80 17422.50 46808.45 26714.50
56332.80 34264.20
17422.50 26714.50 34265.00
17422.50 27295.20 696.90
358.45
338.32
387.70 395.00
369.84 374.91
406.50 436.35 443.80
362.76 395.29 402.76
933.40 969.95 970.00
725.35 905.75 726.90
721.14 905.77 969.65
1953.10 2127.30 465.45
1952.82 465.46
100.70
100.71
447.05
476.35
75.10
11.60 11.60 3328.40
3328.39
205.40 229.80 284.40 517.85 931.35
205.41 229.80 284.39 931.35
498.85 544.40 555.80 356.10 332.30 555.79
50.50 51.70 52.85
50.52 52.84
60.95 66.80 72.60 388.40
66.78
4444.75
732.85
720.49
884.90 399.60
876.94 396.99
459.15 413.85 424.35 215.15
311.50
786.70
764.04
262.75
406.90
459.40
459.60
24.00
11.80 15.00 4601.85 7327.90 6559.55 391.75 4098.27
300.75
493.95
323.15
374.25
422.80 53.85
30.90
260.70 215.15
138.30 152.60
164.10 59.85 194.05 145.90 21.00 14.35
700.25 528.10 1353.10
2402.55
87.50
186.90 80.20 24.70 10.70
902.55 2537.60
191.30 299.30
381.00 547.50
23.55 7.15 200.80
223.80
275.40
110.85
128.95
1540.85 2401.60
178.70
148.30 109.00
179.65
358.90 392.60 502.50
797.90 827.30
418.75 465.30 628.10
851.20 875.10 1096.60
452.00 539.15 975.80
457.80 544.15 971.70
950.00 1297.90 1557.65
1002.30 1373.40 1627.80
146.35 182.95 219.50
977.70 1033.10 1173.25
171.30 206.10 240.95
19.85
127.10
62.70
26.80
104.30
104.30
267.00
69.70
77.00 86.00 100.00
77.00 86.00 100.00
26309.00 20399.00 99090.00
26309.00 20399.00 99090.00
12895.00 300300.00
12895.00 300300.00
686070.00 36764.00 39840.00
686070.00 36764.00 39840.00
199500.00
199500.00
19950.00
19950.00
116129.00 62530.00
116129.00 62530.00
5513.00
5513.00
303072.00
303072.00
755.40 324.80
647.55 324.78
755.40
647.55
123.20 343.85
123.21 343.85
322.70
322.70
338.45
338.43
322.70
322.70
0.00
0.00
5751.20
5615.38
1614.60 1684.80 1755.00 5546.55
1614.60 1684.80 1755.00 5416.83
168.70 1400.00
168.68 1400.00
765.75
655.13
2777.90
2684.21
1791.08
1788.47
3088.25 289.95
3088.25 289.95
1626.10
1626.10
103306.90
103190.61
102.45
102.45
15.10 400.75 1124.70 3.65 0.00
15.10 400.74 1124.72 3.65 0.00
68.70
68.59
68.70
68.59
128.10
128.10
#VALUE!
631.90
5164.00
5158.67
754.00
752.49
871.70
869.08
1630.00
1630.00
662.95
662.97
1475.60
1475.60
466.50
466.51
1021.00
1021.00
25.10 18.60 167.50 167.50 1428.00
25.08 18.62 167.50 167.50 1428.00
28.85
28.85
57.70 86.55 115.40 144.25 173.05 201.90 105.25 53.00
57.69 86.54 115.38 144.23 173.07 201.92 105.24 52.99
12.65 303.10 137.90
12.58 303.12 137.91
122.70
122.72
631.70
631.68
71609.30
71609.31
179.20
179.21
5935.40
5805.65
2.90
2.92
9.75
9.66
11.40 95.15
11.38 95.13
121.40
121.41
872.40
872.42
4970.25
4845.63
5705.20
5705.22
7385.90 302.25 174.30 389.45 0.00
7385.88 302.24 174.31 389.40 0.00
41872.00
45879.00
1857.00
2595.00
2593.00
1891.00
1288.00 1400.00 552.00 1231.00 15280.00
2765.00
17560.00
1675.00 1675.00 2920.00
1495.00 1495.00 0.00
1844.00
0.00
978.00
2872.00
0.00
1256.00 500.00 526.00 350.00 1268.00
0.00
0.00 436.00 0.00
497.00 375.00 419.00
0.00 85.00 1631.00 581.00 0.00
3230.00 1196.00 3040.00
2412.00
358.00 358.00
240.00 368.00
239.00 190.00 125.00 9343.00
1000.00
419.00 320.00 290.00 5000.00
5595.00
1574.90
5595.00 3230.00 1196.00 30000.00
1631.00 581.00
142.65
142.63
289.30 392.05
289.31 392.061
Back
Double Click on ESTIMATE PRO to Open Help ADOBE FILE
Back to Main
Contact Me. [email protected] +919475505609
Email Mobile:
BASIC RATES OF MATERIALS (Inclusive of all taxes)

Code 2 12 51 52 53 101 114 115 116 155 157 160 295 297 367 982 1235 5001 9999 1884B1 1884B2 1884B3 1884B4 1884C1 1884C2 1884C3 1884C4 1884D1 1884E1 1884E3 1884E5 1884F1 1884G5 1884H1 1884H2 1884H3 1884H4 1885E1 1886A1 1886A2 1886A3 1886A4
Unit
Rate
Hire charges of Concrete Mixer 0.14 cubic metre Day 800 Vibrator (Needle type 40mm) Day 300 Hydraulic Excavator of 1 cum bucket hour 1300 Front end loader 1 cum bucket capacity (incl POL) hour 800 Tipper -5 Cum tonne km 3 Bhisti Day 260 Beldar Day 247 Coolie Day 247 Fitter (grade 1) Day 301 Mason (average) Day 287 Operator (Pile/ Special machine) Day 327 Labour & Mistry charges for drilling tube well with all arrangements and sundries per day 5000 Stone Aggregate (Single size) : 20 mm nominal size cum 1050 Stone Aggregate (Single size) : 10 mm nominal size cum 1050 Portland Cement tonne 5000 Coarse sand (zone III) cum 1120 Diesel oil litre 41.29 Mobil oil litre 186 Sundries L.S. 1.49 200 mm Dia ERW Black Pipe (TATA) (Ex-Godown Howrah) metre 2075.76 Lumsum Local Transporting charges for ERW Pipe 200mm at (Ex-Godown Howrah) L.S. 2500 Loading & Unloading Charge for ERW Pipe 200mm - 60 mtr L.S. 2000 Ex-Godown to at site Transportation Charge for ERW pipe 200mm (60mtr)8500 L.S. 150 mm Dia ERW Black Pipe (TATA) (Ex-Godown Howrah) metre 995.4 Lumsum Local Transporting charges for ERW Pipe 150mm at (Ex-Godown Howrah) L.S. 2500 Loading & Unloading Charge for ERW Pipe 150mm - 256 mtr L.S. 2000 Ex-Godown to at site Transportation Charge for ERW pipe 150mm (256mtr) L.S. 17000 MS male/ female adopter including carraige at site etc. each 2401 M.S. reducer of well pipe 200 x 150 mm dia. each 1050 M.S. top cap of 200 mm dia. each 440 M.S. clamp i/c M.S. Plate (125 mm side & 20 mm thick,each bolts with nuts each 75 mm long & 20 mm di 4 nos. 1060 Cost of center guide including carraige at site etc. each 415.43 Cost of puddle earth including carraige at site & loading and unloading etc. 201 cum 150 mm Dia Fibre glass straine (Ex-Godown Howrah) metre 2268 Lumsum Local Transporting charges for 150 mm Dia Fibre glass straine at 2000 L.S. (Ex-Godown Howrah) Loading & Unloading Charge for 150 mm Dia Fibre glass straine- 256 mtr 1800 L.S. Ex-Godown to at site Transportation Charge for 150 mm Dia Fibre glass straine (256mtr) L.S. 17000 Centring & Shuttering chrage for making a base platform 1500x1500 mm allround the tube-well upto a heigh L.S. 300 Stone material 2mm to 5mm (Durgapur Variety) cum 1404 Hire charge of Truck from Durgapur factory to at site L.S. 17000 Stone material 2mm to 5mm (North bengal Variety) cum 500 Hire charge of Truck from Durgapur factory to at site L.S. 8000
Developed by Er. Navin, EE,CPWD
1096

Just 2012

Uploaded by

Document Informationclick to expand document information

Copyright:

Available Formats

Just 2012

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Just 2012

Uploaded by

Copyright:

Available Formats

Market Rate Analysis and Justification Statement

9 98.18 % items has been justified

Assistant Engineer (P) Siliguri Central Circle CPWD, Siliguri

Executive Engineer (P&A) Siliguri Central Circle CPWD, Siliguri

Superintending Engineer Siliguri Central Circle CPWD, Siliguri

Comparative Statement and Justification of Tender Name of work:

Item No DSR "2007" Item No

11.1.1 12.1.1 13.1.1 14.1.1 15.1 16.1

489.20 878.45 123.50 186.40 234.20 61.25

978.00 1757.00 247.00 373.00 468.00 123.00

0.00 0.00 0.00 0.00 0.00 0.00 121.95 128.45 61.26

0.00 0.00 244.00 0.00 257.00 123.00

978.00 1757.00 0.00 373.00 0.00 0.00

17.1.1 18.1.1 19.1.1 19.2.1 20.1.1 21.1.1.1 22.1.1

2964.10 187.75 150.10 496.90 1750.65 358.45 732.85

5928.00 376.00 300.00 994.00 3501.00 717.00 1466.00

0.00 0.00 0.00 0.00 0.00 0.00 0.00

5835.00 0.00 0.00 951.00 2858.00 677.00 1441.00

0.00 376.00 300.00 0.00 0.00 0.00 0.00

475.56 1428.85 338.32 720.49

Amount not Justified Amount 0.00 Amount 62.00

Comparative Statement and Justification of Tender Item No DSR "2007" Item No

Description Rate Amount Rate Amount

Amount not Justified Amount

252,631 Estt. cost

20,226.00 1st Lowest 0.00

The Lowest Tenderer is Lowest Tendered Amount = ADD 0.00%

For Labour cess and Vat = Total Justified Cost =

BASIC RATES : HIRE CHARGES OF TOOL AND PLANTS

Description of Tool and Plants

BASIC RATES : LABOURER

Labourer Rate / 01.04.10

Date from which

Date from which effective 01.10.10 01.04.11 01.10.11

BASIC RATES : CONSTRUCTION MATERIALS

Rate 470 360 300 125

cum cum kilogram kilogram litre litre litre litre

20 15 5400 5400 35 20 95 9 60 1100 375 420 925

Unit 10 cudm 10 cudm sqm sqm sqm sqm sqm Sq.m.

Unit metre metre each each each each

Rate 325 426 8 18 42 270

each each each each each each

each each each each each each each

137 187 40 60 70 100 135

1653 1656 1659 1662 1666 1667 1669 1670

350 390 510 550 200 239 290 387

382 510 466 545 253 350 98 133 26

1895 1896 1897 1898 1900 1902 1904 1913 1915

C.P.brass trap40 mm dia 100 mm S.C.I. trap with vent heel

125 308 263 198 70 104 195 460 740

Unit each each each

Carriage of Stone aggregate below 40 mm nominal size cum

Carriage of Stone aggregate 40 mm nominal size and above cum

Unit 100 metre L.S.

Hollock ballies 125 mm diameter

775 845 73 680 350

1000 Nos 1000 Nos kilogram

2900 2450 210