Scribd Logo
Upload

Welcome to Scribd!

  • 3K views

    Pd5500 Flange Calculation

    Uploaded by

    Makrand Sakpal
    This document provides calculations for a blind flange on a flubber mitigation tank. Key details: - Tank diameter is 1618mm, inner diameter is 400mm, thickness is 8mm - Plate material is steel with modulus of elasticity of 28 GPa - A radial load of 400kg is applied at 450mm from the center - Calculations are based on Roark's formulas for simply supported circular plates - The maximum deflection of 1.875mm is less than half the thickness, so the design is safe

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLS, PDF, TXT or read online from Scribd

    Pd5500 Flange Calculation

    Uploaded by

    Makrand Sakpal
    3K views6 pages
    This document provides calculations for a blind flange on a flubber mitigation tank. Key details: - Tank diameter is 1618mm, inner diameter is 400mm, thickness is 8mm - Plate material is steel with modulus of elasticity of 28 GPa - A radial load of 400kg is applied at 450mm from the center - Calculations are based on Roark's formulas for simply supported circular plates - The maximum deflection of 1.875mm is less than half the thickness, so the design is safe

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides calculations for a blind flange on a flubber mitigation tank. Key details: - Tank diameter is 1618mm, inner diameter is 400mm, thickness is 8mm - Plate material is steel with modulus of elasticity of 28 GPa - A radial load of 400kg is applied at 450mm from the center - Calculations are based on Roark's formulas for simply supported circular plates - The maximum deflection of 1.875mm is less than half the thickness, so the design is safe

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    3K views6 pages

    Pd5500 Flange Calculation

    Uploaded by

    Makrand Sakpal
    This document provides calculations for a blind flange on a flubber mitigation tank. Key details: - Tank diameter is 1618mm, inner diameter is 400mm, thickness is 8mm - Plate material is steel with modulus of elasticity of 28 GPa - A radial load of 400kg is applied at 450mm from the center - Calculations are based on Roark's formulas for simply supported circular plates - The maximum deflection of 1.875mm is less than half the thickness, so the design is safe

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 6

    FLANGE CALCULATION

    (As per BS5500)


    0.005 kg/mm
    -40 C
    A 350 Gr LF2
    SS
    3 thk. PTFE

    Des. Pr. (p)


    Des. Temp.
    Flg. Mat.
    Bolt Mat.
    Gasket Type Corr. Allowance

    0.5 mm

    b0' = min((G0-C),(C-A1))
    b' = 4 * (bo')^0.5
    2b" = 5mm
    G=C-d-2b"
    Gasket Factor - m
    Gasket Fact. Y = kg/mm2

    2
    14.06 kg/mm H= pi()*(C-d)^2*p/4

    Flg. Allowable Str. Op. Sfo.

    2
    12.09 kg/mm Hd=pi()*B62*p/4
    2
    12.09 kg/mm Hg = pi()*2b"*G*m*p
    2
    20530 kg/mm Ht = (H-Hd)
    20 mm
    hd = (C-B-g1)/2

    Bolt Allowable Str. Op. - Sb


    Bolt Allowable Str. Amp. - Sa
    e = Flg. Modulus
    Dia. Of bolt
    Root area for bolt
    Hole dia. For bolt - d
    No. of bolts n
    Flg. ID - mm B
    Flg. OD - mm G0
    Bolt circ. Dia. - C
    Gasket ID - A1
    Gasket OD - G0
    go
    g1
    Am1 - Wm1/Sb
    Am2 - Wm2/Sa
    Bolt Pitch = pi() *C/n

    138.324
    23
    24
    1800
    1900
    1850
    1800
    1900
    10
    10
    2313.33161
    15228.542
    242.1644337

    mm
    mm

    mm
    mm
    mm
    mm
    mm
    mm
    mm

    hg = (d+2b")/2
    ht = (C+d+2b"-B)/4
    Hd*hd
    Hg*hg
    Ht*ht
    M= Hdhd+Hghg+Htht
    hr=(Go-C-d)/4+d/2
    Hr = M/hr
    Wm1= Hg+H+Hr
    Wm2 = pi()*C*b'*Y
    Am = max(Am1, Am2)
    Ab = n* root area/bolt
    Bolt Spacing Criteria t =

    Flg. Thk. = [6M/Sfo (3.14C-nd)]

    1/2

    Blind Flanged Cover


    t =C.bcd.(p/Sb)1/2

    4.645287298 mm

    c=.41 for full face case


    14.30368466 mm
    28.60736931 mm

    Bolt spacing shall not exceed value


    Bolt spacing (actual)

    242.1644337 mm
    246 mm

    Y2 = (j/(j-de))1/2

    0.984408267

    Thickness considering reinforcement

    28.60736931 mm

    (Bolt space -2db)*(m+0.5)


    ---------------------------------6*(E/200000)0.25

    50
    28.28427125
    5
    1822
    2 CAF
    1.12 CAF
    13108.01653
    12723.45025
    286.1990907
    384.5662837
    20
    14
    19.5
    254469.0049
    4006.78727
    7499.042532
    265974.8347
    18.25
    14573.96355
    27968.17917
    184113.069
    15228.54168
    3319.776

    34.78 mm

    FLUBBER MITIGATION TANK

    Blind Flange Calculation


    (Ref. : Flat Plate Design By ROARK & YOUNG
    Considering the case of outer edge simply supported
    Case - 1a
    Load
    Plate Outer Diameter
    Plate Inner Diameter
    Plate Thickness
    Plate Outer Circumfarance
    Radial Location of Unit Loading
    Modulus of Elasticity
    Poissons Ratio
    Unit Line Load
    Plate Constant, {(Et3 *(1-v))/12}

    W
    a
    b
    t
    L
    r0
    E
    v
    w
    D

    =
    =
    =
    =
    =
    =
    =
    =
    =
    =

    Max. Deflection

    = wa3

    400
    1618
    400
    8
    5083.1
    450
    28
    0.29
    4.3973
    66772

    Kg
    mm
    mm
    mm
    mm
    mm
    x 10^6 psi

    880
    63.7
    15.75
    0.315
    200.1
    17.72

    lb/inch

    ((C1L9 / C7)L3)

    Where,
    C1

    C7

    ((((1+v)/2)*(b/a)*(ln a/b)) + ((1v)/4)*(a/b-b/a)))


    0.8969

    2
    = (1/2)*(1-v )*((a/b)-(b/a))
    1.7392

    L3

    = {(r0/4a)*[(((r0/a)2+1)*(ln(a/r0))+((r0/a)2-1)]}
    0.0317

    L9

    = (r0/a)*((((1+v)/2)*(ln(a/ro)))+(((1-v)/4)*(1-(ro/a)2)))
    0.2751

    1.8754

    Since Max. Deflection is less than the Half the thickness of flange plate, hence safe.

    lb
    inch
    inch
    inch
    inch
    inch

    a)2+1)*(ln(a/r0))+((r0/a)2-1)]}

    /2)*(ln(a/ro)))+(((1-v)/4)*(1-(ro/a)2)))

    FLUBBER MITIGATION TANK

    Blind Flange Calculation


    (Ref. : Flat Plate Design By ROARK & YOUNG
    Considering the case of outer edge simply supported
    Case - 1a
    Load
    Plate Outer Diameter
    Plate Inner Radius
    Plate Thickness
    Plate Outer Circumfarance
    Radial Location of Unit Loading
    Modulus of Elasticity
    Poissons Ratio
    Plate Constant, {(Et3 *(1-v))/12}

    W
    a
    b
    t
    L
    r0
    E
    v
    D

    =
    400 Kg
    =
    1618 mm
    =
    400 mm
    =
    8 mm
    = 5083.096914 mm
    =
    450 mm
    =
    28 x 10^6 psi
    =
    0.29
    = 66771.88787

    Max. Deflection

    = wa3
    D

    C1

    880
    63.7
    15.75
    0.315
    200.1
    17.72

    ((C1L9 / C7)L3)

    Where,
    ((((1+v)/2)*(b/a)*(ln a/b)) + ((1v)/4)*(a/b-b/a)))

    = 0.896943149

    C7

    2
    = (1/2)*(1-v )*((a/b)-(b/a))
    1.739193906

    L3

    = {(r0/4a)*[(((r0/a) +1)*(ln(a/r0))+((r0/a) -1)]}


    0.031708334

    L9

    = (r0/a)*((((1+v)/2)*(ln(a/ro)))+(((1-v)/4)*(1-(ro/a) )))
    0.275110663

    = 1.875438062

    Lb
    inch
    inch
    inch
    inch
    inch

    r0))+((r0/a) -1)]}

    )+(((1-v)/4)*(1-(ro/a) )))

    You might also like