03 ITMAweavingimportante Itma 2011
03 ITMAweavingimportante Itma 2011
03 ITMAweavingimportante Itma 2011
TOYOTA-JAT 710
AIR JET LOOM
Features: 20% less air consumption Max. Speed - 1250 rpm 30% less vibrations
one can weave fabrics including ultra-wide home furnishings fabric, stretch fabric, airbags, seersucker and fabric with tuck-in selvages.
Greater Flexibility-
TOYOTA-JAT 710
AIR JET LOOM
Shedding : Cam (-/+); Crank; Electronic (Dobby/Jacquard) Weft Insertion ; High-propulsion main nozzle; Conical tandem nozzles; Tapered sub nozzles; Stretch nozzle; Auto pick finder; Automatic weft insertion device (ATC) Beating: Two-sided crank drive with oil bath; Multiple shortsley sword Let Off: Electronic with +/- Easing for heavy/light weight fabrics, double back rollers for correct warp tension Take Up: Mechanical Stop Mark Prevention system Stop Motion; Electronic; Leno-selvage & waste-selvage break stop motion; Reflecting type weft detector (double feeler), 4 color LED signal lamp Selvage: Left/right rotary full-leno selvage device Waste Selvage : On the right with catch yarn Temple: Upper Temple; lower & full width also possible.
TOYOTA-JAT 710
AIR JET LOOM
Optional Features:
Automatic weft brake system (ABS) Air Gripper System Automatic Pick Controllers Individual Servo Motors: for left & right beams;
upper & lower beams
Electronic take up 2-thread half leno selvedge device Tuck-in selvedge device Centre selvedge device Weft insertion device for different type and counts
DORNIER
DORNIER A1: air-jet weaving machine
DORNIER A1: air-jet weaving machine Can be operated with a simple cam motion, in combination with a Jacquard head of 12,000 hooks, a dobby with up to 16 heald frames or with the DORNIER EasyLeno motion Can be used for production of technical fabrics, home textiles and garment fabrics Machine widths : from 150 cm upto 540 cm
DORNIER A1: air-jet weaving machine Selvedge formation: Two-end disc leno device; double disc leno device; thermally sealed selvedges, tucked selvedges with DORNIER PneumaTucker (right,left & in the center); Quick change from tucked to leno selvedges & vice-versa Temples: Cylinder temples, width-independent full-width temple (option) Electronic Warp Let-off motion EWL: Electronically controlled warp let-off with absolute- or s-sensor (option); Warp beam support universal and EuroFix for 800 - 1,250 mm beam diameter, also with split warp beams; Top beam support up to 1,250 mm Electronic Cloth Take-up motion ECT: Electronically controlled, synchronized with EWL; Cloth roll diameter 540 mm with off-loom wind-up up to 1,800 mm Automatic Start-mark Prevention ASP: ASP including harness leveling, high torque start-up of main motor; Time-dependent start compensation with let-off reversal
DORNIER P1: Rapier weaving machine With up to 16 weft colors, the P1 is able to produce technical textiles, home textiles and clothing whether in combination with a Jacquard machine with up to 20,000 lifting hooks, a 28-shaft dobby, cam motion or the DORNIER EasyLeno unit. Equipped with Positively controlled center transfer plus DORNIER MotoLeno or DORNIER AirGuide Versatile application range runs from high quality silk fabrics for 16 weft color furniture upholstery fabrics, ladies wear through to carbon, glass or coated geotextiles with the coarsest yarn counts in warp and weft and densities of 0.5 ends/cm or even lower.
Using DORNIER s ORW technology, it is possible to integrate embroidery in the weaving process so that weaving and embroidery can run at the same time on DORNIER weaving machines.
Technology
Opening the reed upwards allows inserting additional pattern threads between the reed and weaving shafts using special thread guides. These additional pattern threads are passed to the weaving process using a bypass, comprising an additional warp stop motion and a deflection system above the weaving shafts, using the movable thread guides. After the additional pattern threads have dipped into the lower shed, the weft is inserted which binds the additional pattern threads. This creates a weft effect on the fabric surface that can be controlled freely using a lifting plan and is comparable to embroidery and Scherli-patterns.
PICANOL
Machines on Display
OptiMax 4-R 190: for stretch denim OptiMax 2-P 250: for para amide OptiMax 6-R 220: for worsted OptiMax 4-P 540: for coating, positive gripper OptiMax 12-J 340: for upholstery Omniplus Summum 4-P 190: lining Omniplus Summum 4-R 190: parachute Omniplus Summum 4-R 220: automotive Omniplus Summum 4-P 340: sheeting TERRYplus 800 8-J 260: terry
PICANOL
Optimax Rapier Weaving Machines
PICANOL
OptiMax4-R 190 :
for stretch denim Warp Yarn Count: Ne 40/2 Material : cotton density Weft ; 36 ends/cm Yarn Count: Ne 16/1 Material : cotton density Drawing-in Width Special feature : 26 picks/cm : 184 cm : Speed
PICANOL
OptiMax 2-P :250
for para -aramide Warp Yarn Count: dtex 1100 Material density Weft Material density Drawing-in Width Special feature : para-aramide ; 8.5 ends/cm : dtex 1100 : 8.5 picks/cm : 240 cm : Ecofill,
PICANOL
OptiMax 6-R 220 :
for worsted Warp Yarn Count: Nm 38/1 Material density Weft Material density Drawing-in Width Special feature : wool ; 31.5ends/cm : wool/polyamide/ elastane : 27 picks/cm : 190 cm : Electronic weft tensioner
PICANOL
OptiMax4-P 540 :
for coating Warp Yarn Count: dtex 1100/210 Material density Weft : polyester ; 6.8 ends/cm PET monofil 0.40 Material density Drawing-in Width Special feature : polyester : 6.8 picks/cm : 520 cm : Direct warp control, + gripper
PICANOL
OptiMax 12-J 340 :
for upholstery
Warp Yarn Count: dtex 167/48 Material density Weft : polyester ; 66 ends/cm Ne 201/ , dtex 167 Material : Polyester/Viscose /Blends density Drawing-in Width Special feature : 36-24-18 picks/cm : 298 cm : Electronic weft tensioner
PICANOL
OMNIplus Airjet Weaving Machines
PICANOL
OMNIplus Summum 4-P 190:
for lining Warp Yarn Count: dtex 78 Material density Weft Material density Drawing-in Width : polyester ; 35 ends/cm : Polyester : 22 picks/cm : 150 cm
PICANOL
OMNIplus Summum 4-R 190:
for parachute Warp Yarn Count: dtex 33/13HT Material density Weft Material density Drawing-in Width : polyamide ; 46 ends/cm : Polyamide : 53 picks/cm : 174 cm
PICANOL
OMNIplus Summum 4-R 220:
for automotive Warp Yarn Count: dtex 610/141 Material density Weft Material density Drawing-in Width : polyester ; 27 ends/cm : Polyester : 18 picks/cm : 195 cm
PICANOL
OMNIplus Summum 4-P 340:
for sheeting Warp Yarn Count: Ne 60/1 Material density Weft Material density Drawing-in Width : cotton ; 73 ends/cm : cotton : 32 picks/cm : 297 cm
PICANOL
TERRYplus 800 8-J 260 340:
for terry Warp Ground Yarn Count: Ne 24/2 Material Warp Pile : cotton density ; 12.8 ends/cm Yarn Count: Ne 20/2 Material density Weft Material : cotton ; 12.8 ends/cm : cotton
Drawing-in Width
: 235 cm
PICANOL
Note on Special Features: Bluebox: larger memory to store more data, faster
calculation speed by 10X, remote service possibilities.
PICANOL
Note on Special Features: Direct Warp Control: enables warp tension to be kept to a
minimum and minimize variation in warp tension
Jakob Muller
CTM8 - for belts and heavy tapes with the same edges on both sides [bobbins]. CKM8 - for belts and heavy tapes with edge formation by means of latch-needles.
Model CTM 8 1/220 Number of spaces Max. reed width [mm] Max. fabric Width (mm) Min. Fabric Width (mm) Speed (beatup/min) Heald frames Cam Repeat 1 220 200 70 320 2/160 2 160 145 40 400 max. 14 1:5, 1:6, 1:8, 1:10, 1:12 CKM 8 1/320 1 320 300 130 300
Jakob Muller
NH2M 53/NC2M: High Performance Narrow Fabric Needle Looms for elastic and non-elastic narrow ropes.
Model Number of spaces NH2M 53 8/27 8 NC2M 2/D 2/84 2
Rope Dia
From 1mm
Upto 20 mm
No. of Sheds
8/16
4/8/12/16
Weft per cm
8-35
3-45
Advantages:
Warp beams with over 5,000m of yarn with creel for reserve bobbins Longer knot-free woven items due to extended yarn lengths Longer running times without bobbin changes Better mechanical properties as compared to braided structures Variety of patterns for diverse surface & rope characteristics
CCI
The Studio - Sampling Loom
Weaving Width Speed 8-17 inches 150 ppm maximum
CCI
Mini Lutan - Single-end Warping Machine
Weaving Width Warping Length Warping Speed Drum Circumference Stationary Creel 20 inches 7.5 - 30 m 400 m/min max. 2.5 m Up to 8 colours Computerized automatic colour change. Equipped with 8 accumulators Equipped with 5 leasing rods and 2 leases maximum
Leasing Device
Leasing is available on both sides of the machine and two leases in total are possible. The warp tension and beaming speed are adjustable according to types of material used.
CCI
Single-End Sizing Unit
Can carry our sizing with one bobbin, providing sized warps for the sampling loom. The temperature and speed of sizing is electrically controlled. Equipped with yarn-break detecting device, machine stops when yarn breaks. Drying electronically controlled. Electrically-heated drying through hot air.