Scribd Logo
Upload

Welcome to Scribd!

  • 103 views

    SDS - Pioner Topcoat - Marine - Protective - English (Uk) - Singapore

    Uploaded by

    Ami Terecef Gamboa Miranda
    This document provides a safety data sheet for Pioner Topcoat, a solvent-borne coatings product. It lists the product name and code, supplier information, hazards identified, composition details noting hazardous ingredients, and first aid measures. It also outlines firefighting measures, accidental release measures, handling and storage guidelines, exposure controls, physical and chemical properties, stability information, toxicological details, and ecological hazards. Personal protective equipment is recommended including respirators, gloves, and safety eyewear.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    SDS - Pioner Topcoat - Marine - Protective - English (Uk) - Singapore

    Uploaded by

    Ami Terecef Gamboa Miranda
    103 views6 pages
    This document provides a safety data sheet for Pioner Topcoat, a solvent-borne coatings product. It lists the product name and code, supplier information, hazards identified, composition details noting hazardous ingredients, and first aid measures. It also outlines firefighting measures, accidental release measures, handling and storage guidelines, exposure controls, physical and chemical properties, stability information, toxicological details, and ecological hazards. Personal protective equipment is recommended including respirators, gloves, and safety eyewear.

    Original Title

    SDS - Pioner Topcoat - Marine_Protective - English (Uk) - Singapore

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides a safety data sheet for Pioner Topcoat, a solvent-borne coatings product. It lists the product name and code, supplier information, hazards identified, composition details noting hazardous ingredients, and first aid measures. It also outlines firefighting measures, accidental release measures, handling and storage guidelines, exposure controls, physical and chemical properties, stability information, toxicological details, and ecological hazards. Personal protective equipment is recommended including respirators, gloves, and safety eyewear.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    103 views6 pages

    SDS - Pioner Topcoat - Marine - Protective - English (Uk) - Singapore

    Uploaded by

    Ami Terecef Gamboa Miranda
    This document provides a safety data sheet for Pioner Topcoat, a solvent-borne coatings product. It lists the product name and code, supplier information, hazards identified, composition details noting hazardous ingredients, and first aid measures. It also outlines firefighting measures, accidental release measures, handling and storage guidelines, exposure controls, physical and chemical properties, stability information, toxicological details, and ecological hazards. Personal protective equipment is recommended including respirators, gloves, and safety eyewear.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 6

    Conforms to Regulation (EC) No.

    1907/2006 (REACH), Annex II

    SAFETY DATA SHEET


    Pioner Topcoat

    1.

    Identification of the preparation and of the company


    : Pioner Topcoat : 641 : Jotun (Singapore) Pte Ltd 11 & 15 Sixth Lok Yang Road Singapore 628111 Phone: 6508 8288 Fax: 6265 7484 [email protected] : Jotun (Singapore) Pte Ltd, Tel: 6508 8288 : Coatings: Solvent-borne.

    Product name and/or code Label No. Supplier/Manufacturer

    Emergency telephone number Product use

    2.

    Hazards identification

    The product is classified as dangerous according to Directive 1999/45/EC and its amendments. Flammable. Harmful by inhalation and in contact with skin. Irritating to respiratory system. Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Harmful Dangerous for the
    environment

    3.

    Composition/information on ingredients
    Notes CAS number EC number % by weight 25 - 50 Classification R10 Xn; R20, R65 Xi; R37 R66 N; R51/53 R10 Xn; R20/21 Xi; R38 F; R11 Xn; R20

    Substances presenting a health or environmental hazard within the meaning of the Dangerous Substances Directive 67/548/EEC. Chemical name* Solvent naphtha (petroleum), light arom.

    35-50 64742-95-6 265-199-0

    xylene ethylbenzene See section 16 for the full text of the R-phrases declared above

    12,5- 1330-20-7 20 1-3 100-41-4

    215-535-7 202-849-4

    10 - 25 2.5 - 10

    Occupational exposure limits, if available, are listed in section 8.

    4.

    First-aid measures
    : In all cases of doubt, or when symptoms persist, seek medical attention. Never give anything by mouth to an unconscious person. If unconscious, place in recovery position and seek medical advice. : Remove to fresh air. Keep person warm and at rest. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. : Remove contaminated clothing and shoes. Wash skin thoroughly with soap and water or use recognised skin cleanser. Do not use solvents or thinners.

    First-aid measures General

    Inhalation

    Skin contact

    Date of issue

    : 19.01.2010.

    Page: 1/6

    Pioner Topcoat Eye contact Ingestion : Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. : If swallowed, seek medical advice immediately and show the container or label. Keep person warm and at rest. Do not induce vomiting.

    5.

    Fire-fighting measures
    : Recommended: alcohol-resistant foam, CO 2, powders, water spray. : Do not use water jet. : Fire will produce dense black smoke. Exposure to decomposition products may cause a health hazard. Appropriate breathing apparatus may be required. Cool closed containers exposed to fire with water. Do not release runoff from fire to drains or watercourses.

    Extinguishing media Extinguishing media not to be used Recommendations

    6.

    Accidental release measures


    : Exclude sources of ignition and ventilate the area. Avoid breathing vapour or mist. Refer to protective measures listed in sections 7 and 8. Contain and collect spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local regulations (see section 13).

    Personal precautions

    Spill : Preferably clean with a detergent. Avoid using solvents. Note: see section 8 for personal protective equipment and section 13 for waste disposal.

    7.

    Handling and storage


    : Vapours are heavier than air and may spread along floors. Vapours may form explosive mixtures with air. Prevent the creation of flammable or explosive concentrations of vapours in air and avoid vapour concentrations higher than the occupational exposure limits. In addition, the product should only be used in areas from which all naked lights and other sources of ignition have been excluded. Electrical equipment should be protected to the appropriate standard. To dissipate static electricity during transfer, earth drum and connect to receiving container with bonding strap. Operators should wear antistatic footwear and clothing and floors should be of the conducting type. Keep container tightly closed. Keep away from heat, sparks and flame. No sparking tools should be used. Avoid contact with skin and eyes. Avoid the inhalation of dust, particulates, spray or mist arising from the application of this preparation. Avoid inhalation of dust from sanding. Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Put on appropriate personal protective equipment (see section 8). Never use pressure to empty. Container is not a pressure vessel. Always keep in containers made from the same material as the original one. Comply with the health and safety at work laws. When operators, whether spraying or not, have to work inside the spray booth, ventilation is unlikely to be sufficient to control particulates and solvent vapour in all cases. In such circumstances they should wear a compressed air-fed respirator during the spraying process and until such time as the particulates and solvent vapour concentration has fallen below the exposure limits.

    Handling

    Storage

    : Store in accordance with local regulations. Observe label precautions. Store in a dry, cool and well-ventilated area. Keep away from heat and direct sunlight. Keep away from sources of ignition. Keep away from: oxidising agents, strong alkalis, strong acids. No smoking. Prevent unauthorised access. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not empty into drains.

    Date of issue

    : 19.01.2010.

    Page: 2/6

    Pioner Topcoat

    8.

    Exposure controls/personal protection


    : Provide adequate ventilation. Where reasonably practicable, this should be achieved by the use of local exhaust ventilation and good general extraction. If these are not sufficient to maintain concentrations of particulates and solvent vapours below the OEL, suitable respiratory protection must be worn. Occupational exposure limits EU OEL (Europe, 6/2000). TWA: 100 mg/m 8 hour(s). Form: All forms TWA: 20 ppm 8 hour(s). Form: All forms EU OEL (Europe, 4/2006). Absorbed through skin. Notes: Indicative Short term limit value: 442 mg/m 15 minute(s). Short term limit value: 100 ppm 15 minute(s). Limit value: 221 mg/m 8 hour(s). Limit value: 50 ppm 8 hour(s). EU OEL (Europe, 4/2006). Absorbed through skin. Notes: Indicative Limit value: 100 ppm 8 hour(s). Limit value: 442 mg/m 8 hour(s). Short term limit value: 200 ppm 15 minute(s). Short term limit value: 884 mg/m 15 minute(s).

    Engineering measures

    30 g/m Solvent naphtha (petroleum), light arom. xylene

    ethylbenzene

    Personal protective equipment Respiratory system : If workers are exposed to concentrations above the exposure limit, they must use appropriate, certified respirators. Use respiratory mask with charcoal and dust filter when spraying this product.(as filter combination A2-P2). In confined spaces, use compressed-air or fresh-air respiratory equipment. When use of roller or brush, consider use of charcoalfilter. Skin and body Hands : Personnel should wear antistatic clothing made of natural fibres or of hightemperature-resistant synthetic fibres. : Wear suitable gloves. Recommended, gloves(breakthrough time) > 8 hours: nitrile rubber, 4H, Teflon Not recommended, gloves(breakthrough time) < 1 hour: neoprene, butyl rubber, PVC For right choice of glove materials, with focus on chemical resistance and time of penetration, seek advice by the supplier of chemical resistant gloves. The user must check that the final choice of type of glove selected for handling this product is the most appropriate and takes into account the particular conditions of use, as included in the user's risk assessment. : Use safety eyewear designed to protect against splash of liquids.

    Eyes

    9.

    Physical and chemical properties


    : : : : : : : Liquid. Characteristic. Various colours. Closed cup: 37C (98,6F) 1.1 g/cm3 1.1 - 7% Insoluble in the following materials: cold water and hot water.

    Physical state Odour Colour Flash point Density Explosion limits Ingredient name

    10. Stability and reactivity


    Stable under recommended storage and handling conditions (see section 7). Hazardous decomposition products: carbon monoxide, carbon dioxide, smoke, oxides of nitrogen. Keep away from the following materials to prevent strong exothermic reactions: oxidising agents, strong alkalis, strong acids.

    Date of issue

    : 19.01.2010.

    Page: 3/6

    Pioner Topcoat

    11. Toxicological information


    There is no data available on the preparation itself. The preparation has been assessed following the conventional method of the Dangerous Preparations Directive 1999/45/EC and classified for toxicological hazards accordingly. See sections 2 and 15 for details. Exposure to component solvent vapour concentrations in excess of the stated occupational exposure limit may result in adverse health effects such as mucous membrane and respiratory system irritation and adverse effects on the kidneys, liver and central nervous system. Solvents may cause some of the above effects by absorption through the skin. Symptoms and signs include headache, dizziness, fatigue, muscular weakness, drowsiness and, in extreme cases, loss of consciousness. Repeated or prolonged contact with the preparation may cause removal of natural fat from the skin, resulting in non-allergic contact dermatitis and absorption through the skin. If splashed in the eyes, the liquid may cause irritation and reversible damage. Swallowing may cause nausea, diarrhoea, vomiting, gastro-intestinal irritation and chemical pneumonia.

    12. Ecological information


    There is no data available on the preparation itself. Do not allow to enter drains or watercourses. The preparation has been assessed following the conventional method of the Dangerous Preparations Directive 1999/45/EC and is classified for eco-toxicological properties accordingly. See Sections 3 and 15 for details. Aquatic ecotoxicity Product/ingredient name Solvent naphtha (petroleum), light arom. Test Mortality Result Acute EC50 <10 mg/L Acute IC50 <10 mg/L Acute LC50 <10 mg/L Acute LC50 12000 to 16114 ug/L Fresh water Species Daphnia Algae Fish Fish - Bluegill - Lepomis macrochirus 1,1 g Algae Daphnia Fish Exposure 48 hours 72 hours 96 hours 96 hours

    xylene

    ethylbenzene

    Population Intoxication Mortality

    Acute EC50 7,2 mg/L Acute EC50 2,93 mg/L Acute LC50 4,2 mg/L

    48 hours 48 hours 96 hours

    Ecological information Biodegradability Product/ingredient name Solvent naphtha (petroleum), light arom. xylene Bioaccumulative potential Product/ingredient name xylene

    Aquatic half-life LogKow 3,12

    Photolysis BCF -

    Biodegradability Not readily Readily Potential high

    13. Disposal considerations


    Do not allow to enter drains or watercourses. Material and/or container must be disposed of as hazardous waste. European waste catalogue : 08 01 11* waste paint and varnish containing organic solvents or other dangerous substances. If this product is mixed with other wastes, this code may no longer apply. (EWC) If mixed with other wastes, the appropriate code should be assigned. For further information, contact your local waste authority.

    14. Transport information


    Transport within users premises: always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage. International transport regulations Proper shipping name : Paint. : Solvent naphtha (petroleum), light aromatic Marine pollutant substances UN Number : 1263 Class : 3 Packing group : III Date of issue : 19.01.2010. Page: 4/6

    Pioner Topcoat Label :

    Marking

    The environmental hazardous / marine pollutant mark is only applicable for packages containing more than 5 litres for liquids and 5 kg for solids.

    Additional information ADR / RID

    : Tunnel restriction code: (D/E) Hazard identification number: 30 Special provisions: 640E : Emergency schedules (EmS): F-E, S-E Marine pollutant: Yes.

    IMDG

    Transport in accordance with ADR/RID, IMDG/IMO and ICAO/IATA and national regulation.

    15. Regulatory information


    EU regulations Hazard symbol or symbols : The product is classified and labelled for supply in accordance with the Directive 1999/45/EC as follows: :

    Harmful

    Dangerous for the environment

    Risk phrases

    : R10- Flammable. R20/21- Harmful by inhalation and in contact with skin. R37- Irritating to respiratory system. R51/53- Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. : S23- Do not breathe vapour / spray. S36/37- Wear suitable protective clothing and gloves. S51- Use only in well-ventilated areas. : Solvent naphtha (petroleum), light arom. xylene : The information contained in this safety data sheet does not constitute the users own assessment of workplace risks, as required by other health and safety legislation. The provisions of the national health and safety at work regulations apply to the use of this product at work.

    Safety phrases

    Contains: Industrial use

    16. Other information


    CEPE Classification : 1 : R11- Highly flammable. Full text of R-phrases R10- Flammable. referred to in sections 2 and R20- Harmful by inhalation. 3 - Europe R20/21- Harmful by inhalation and in contact with skin. R65- Harmful: may cause lung damage if swallowed. R37- Irritating to respiratory system. R38- Irritating to skin. R66- Repeated exposure may cause skin dryness or cracking. R51/53- Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. The information in this Safety Data Sheet is required pursuant to EU Directive 91/155/EEC and its amendments. : 19.01.2010. Date of issue : 3 Version Indicates information that has changed from previously issued version. Notice to reader

    Date of issue

    : 19.01.2010.

    Page: 5/6

    Pioner Topcoat The information in this SDS is based on the present state of our knowledge and on current laws. The product is not to be used for purposes other than those specified under section 1 without first obtaining written handling instructions. It is always the responsibility of the user to take all necessary steps to fulfil the demands set out in the local rules and legislation. The information in this SDS is meant to be a description of the safety requirements for our product. It is not to be considered a guarantee of the product's properties.

    Date of issue

    : 19.01.2010.

    Page: 6/6

    You might also like