Flexiflo TankTruckEquipments

Download as pdf or txt
Download as pdf or txt
You are on page 1of 20

PROVIDING EXPERT SOLUTIONS FOR THE SAFE AND EFFICIENT

OF HAZARDOUS BULK PRODUCTS WORLDWIDE

Euro-Line Bottom Valves


The line of Civacon pneumatically operated and lightweight Euro 100 bottom valves are in accordance with API RP 1004, ADR and EN13316. The Euro-Line of high-flow bottom valves are available as compact 100-1 series and super compact 100-2 series.

Features and Benefits


Die cast aluminum construction Hard anodized and stainless steel internals Compact design available in 4" size or DN100 VITON GFLT seals compatible with all fuel grades and additives Self-closing piston-type operation Valve service inside of the compartment possible Superior gasket sealing with grooved flanges Manually openable in case of emergency Stainless steel filter/strainer Superior flow rate no moving parts in the flow path Sequenced operation standard

Euro-Line Bottom Valve Compact

Accessories
SF100-ST40 10.02.43 10.01.74/EU 10.01.84 Euro 100 kit Steel sump flange Aluminium sump flange Aluminium square outlet flange Gasket for square outlet flange Seal repair kit for all Euro-Line models

Euro-Line Bottom Valve Super Compact

Ordering Specifications
Euro-Line Bottom Valve: Compact Model
Euro 100-1 Euro 100-1-S Euro 100-1-B Euro 100-1-BS 4" non-pressure balanced 4" non-pressure balanced sequential operation 4" pressure balanced 4" non-pressure balanced sequential operation

Euro-Line Bottom Valve: Super Compact Model


Euro 100-2 4" non-pressure balanced 4" non-pressure balanced sequential operation 4" pressure balanced 4" pressure balanced sequential operation

Euro-Line Bottom Valve Compact


Euro 100-2-S Euro 100-2-B Euro 100-2-BS

PHONE: +31 252 660 300 Fax: +31 252 687 258 Boekweitstraat 1, P Box 32 2150 AA Nieuw-Vennep Netherlands www.opw-ftg.nl .O.

API RP 1004 Tank Truck Adaptors


Civacon API Adaptors are precisely engineered and manufactured to match a standard loading coupler and to deliver superior performance and value. One focus of our engineering effort is on mating-surface materials that allow for a wide range of product solutions. The end result is a wide range of applicable options to match specific needs and situations.

Features and Benefits


Mounting flange meets 4" TTMA specification All API adaptors and aluminum caps are designed in accordance with API RP 1004, ADR and EN13083 Slim line hydrodynamic design provides for high flow rates and minimum pressure drop Lightweight die cast aluminum construction for maximum strength Stainless steel shaft/cam/spring for maximum service life Mounting lugs for model 200, air interlock 3 2-way valve Super strong lightweight aluminum lever with twostage opening provides indication of valve position Grease nipple on handle provides for easy maintenance VITON GFLT seals are standard for compatibility with all fuel grades and additives One-piece hard anodized replaceable nose ring897B Designed for dryline applications Bushed running surfaces provide for efficient operation and long life Flat bottom valve body design provides complete draining capability to minimize contamination891A

API Adaptor 897BA

Accessories
875-AL40 200 4" Aluminium dust cap Air Interlock Valve

API Adaptor 891A

Ordering Specifications
API Adaptors with Handles
861BA 897BA 897BHA (UK) 891A Handle and sight glass, two-piece design, hard-coated nose Handle and sight glass, one-piece design, bronze outlet nose Handle and raised sight glass, one-piece design, bronze outlet nose Handle and sight glass, one-piece design, flat bottom, hard-coated nose (available from August 2007)

API Adaptors without Handle


866E 897NB No sight glass, anodized hard-coated body, hard-coated nose Sight glass, bronze outlet nose

Tank-truck cabinet with API Adaptors


PHONE: +31 252 660 300 Fax: +31 252 687 258 Boekweitstraat 1, P Box 32 2150 AA Nieuw-Vennep Netherlands www.opw-ftg.nl .O.

Aluminum Manhole Covers


Whatever your application, whatever your specification, chances are we have a manhole cover that meets and exceeds industry standards. Available in a wide variety of materials (including steel, stainless steel, aluminum) and standard size of 20", our manholes set the standard for precision and durability.

Features and Benefits


Manhole covers are designed and approved in accordance with API RP 1004, ADR and EN13314 and EN13317 standards 10" (254mm) offset pressure activated fillcover (PAF) for easy and secure access for loading Available with Acrylonitrile or VITON GFLT seals for multiple applications Lightweight and strong aluminum alloy PAF materials of construction 360 rotatable orientation for left and right hand PAF Two-Stage opening provides safe access Self-latching (automatic locking of PAF) Keylock

Accessories
58.50.99/C H 70480 H 70898 LC 01013 NC 000017 Blank flange with gasket for dipstick/Liberty sensor hole Sensor flange no gasket for dipstick/Liberty sensor hole Sensor gasket flange for dipstick/Liberty sensor hole Complete Dipstick assembly 114" with tube and dipstick 2000mm for B model Internal P/V vent for manhole covers

Ordering Specifications
Aluminum Manhole Covers
58-00-28C/SERR-SL 58-00-28D/SERR-SL 20" Manhole, bolted and self-latching (UK market) 20" Manhole, bolted and self-latching

Aluminum Manhole Cover

PHONE: +31 252 660 300 Fax: +31 252 687 258 Boekweitstraat 1, P Box 32 2150 AA Nieuw-Vennep Netherlands www.opw-ftg.nl .O.

Vapor Recovery Vents


Civacons Vapor Recovery Vents provide additional safety and security when carrying hazardous liquids. The models listed are designed in accordance with API RP 1004, ADR and EN13082 standards.

Features and Benefits


Mounting flange 3" TW Compact design in 3" (80 mm) size for 20" manholes Constructed of Aluminum with corrosion-resistant trim Operates in temperature range of -20C to +70C Self-opening at vacuum of 6 kPa (60 mbar) VITON GFLT seals compatible with all fuel grades and additives

Vapor Recovery Vent 1995TW/SF-2

Accessories
LC-05052 LC-94022 Vulcanised vapor hose Hose-clamps

Ordering Specifications
Vapor Recovery Vents
1995TW/S 1995TW/SF-2 1995TWD-2 1995TWD-SV Vapor Valve Vapor valve with flame arrestor Vapor line valve Vapor line valve (Smartvent) UK IP code of practice

Vapor Valve with flame arrestor

PHONE: +31 252 660 300 Fax: +31 252 687 258 Boekweitstraat 1, P Box 32 2150 AA Nieuw-Vennep Netherlands www.opw-ftg.nl .O.

Vapor Recovery Adaptors


Vapor Recovery Equipment: Civacons Vapor Recovery Adaptor is designed to maximize efficiency of vapor recovery with a minimum pressure drop. The Vapor Recovery Adaptor is in accordance with API RP 1004, ADR and EN13081 standards.

Features and Benefits


4" size or DN100 Aluminum construction Connections: 4" TTMA flange Vapor coupler connected on hose side with a 4" Kamlok (spec. MIL-C 27487) quick coupler VITON seals compatible with all fuel grades and additives Standard on the 633LVB sight glass and drain plug.

Accessories
1711T 1711T-CA-PL 201 Duratuff cap Duratuff cap with cable Air Interlock valve

633LVB Vapor Recovery Adaptor with Model 201 Air Interlock Valve

Vapor Adaptor with Aluminum Coupler

Ordering Specifications
Vapor Recovery Equipment
633LVB Vapor adaptor without interlock

Vapor Recovery

PHONE: +31 252 660 300 Fax: +31 252 687 258 Boekweitstraat 1, P Box 32 2150 AA Nieuw-Vennep Netherlands www.opw-ftg.nl .O.

Air Interlock Valve Model 200 and 201


The Model 200 and 201 air interlock valves are installed on bottom loading adaptors and vapor recovery fittings to lock the brakes to prevent driveaways during loading. It also opens the air operated vapor valves during loading and unloading.

Features and Benefits


Corrosion resistant nickel-plated aluminum body Main shaft wiper seal will prevent contaminants from entering seal area Compact design fits in all air valve locations Universal mounting fits all current API adaptors and vapor fittings Rigid mounting for extended valve life

Air Interlock Valve Model 200

Air Interlock Valve Model 201

Ordering Specifications
Air Interlock Valve: Model 200 and Model 201
200 201 Air Interlock Valve, 3 way, for API RP 1004 Tank Truck Air Interlock Valve, 3 way, for 633LVB Vapor Recovery Adaptor

Vapor Recovery Adaptor with Air Interlock Valve Model 201

PHONE: +31 252 660 300 Fax: +31 252 687 258 Boekweitstraat 1, P Box 32 2150 AA Nieuw-Vennep Netherlands www.opw-ftg.nl .O.

Tank Truck Unloading Equipment


The range of 871 aluminium gravity couplers has been designed for use with API adaptors when discharging the tank truck. The range of 871 gravity couplers can be connected to any API tank-truck adaptor in accordance with API RP 1400, ADR and EN13083 standards.

Features and Benefits


Strong die cast aluminum construction for long lifetime Equipped with vibration resistant TWIN-KAM cam arms Zink plated steel chain to connect the Gravity Coupler to the API Adaptor Buna seals

Gravity Coupler 871-EDB

Unloading operation

Gravity Coupler 871-A

Ordering Specifications
Tank Truck Unloading Equipment
With Kamlok adaptor (male) for connection to API adaptors with a handle Available sizes: 4" API x 4" Kamlok male 4" API x 3" Kamlok male 4" API x 4" BSP female Kamlok for connection to API adaptors with handle 4" API x 3" BSPP female-thread for connection to API adaptors with handle 4" Same only with 3" Guillemin coupling, optionally with sightglass 4" API with handle x 4" BSP female thread, for use with API adaptor without handle

871-A

871-B

Tank-truck Unloading Equipment

871-DB 871-DBF

871-EDB

PHONE: +31 252 660 300 Fax: +31 252 687 258 Boekweitstraat 1, P Box 32 2150 AA Nieuw-Vennep Netherlands www.opw-ftg.nl .O.

Pneumatic Control Units


With the Pneumatic Control Units (PCU and PCP) both vapor recovery valves and bottom valves can be opened. In order to open a bottom valve, the corresponding vapor valve has to be open. Visual indicators enable the tank-truck operator to check the status of either the vapor recovery valves and bottom valves.

Features and Benefits


Compartment visual indicators allow the operator to easily see the condition of the bottom valves. Black is closed, Green is open. Material seals available in both Delrin and Buna-N RF unit and emergency air switch is optional for additional safety Three emergency stop switches for improved safety PCU model is contained in a corrosion-resistant lockable stainless steel box Door brake interlock is included in the PCU model only Automatic closure with less than 4.5 bar is also a standard feature on the PCU model PCP model is manufactured with a mounting plate

PCU-661L

ABOUT THE PCU AND PCP SYSTEM By pulling the green vapor button all vapor vents will open. The indicator under the green push button will turn from black to green indicating all vapor vents are open. By pulling the compartment switches the selected bottom valve will open and the light indicator will change from black to green meaning the bottom valve of the compartment is open. Pushing the red emergency button in the pneumatic control box will close down all the bottom valves and vapor vents. The compartments with a green indicator will turn black as well as the indicator of the vapor valves. The PCU model comes standard with two remote emergency buttons

Ordering Specifications
Pneumatic Control Units

PCP-461R
PCU-*61**

* Number of compartments (4 to 10) ** R for right orientation, L for left orientation Example: 7 compartment tank-truck, with right orientation: PCU-761R Pneumatic Control Panel, * Number of compartments (2 to 6) Example: 3 compartment tank-truck: PCP-361R

PCP-*61R

PHONE: +31 252 660 300 Fax: +31 252 687 258 Boekweitstraat 1, P Box 32 2150 AA Nieuw-Vennep Netherlands www.opw-ftg.nl .O.

Safety and Control SystemSCS


The SCS sealed parcel delivery system monitors liquid products transported by meter-less tank trucks, and is in accordance with EN15208. EU directive on Volatile Organic Compounds (VOCs) prohibits the use of dipsticks on tank trucks for petroleum products therefore the SCS provides an approved method of tank truck monitoring. The SCS system is mounted on petroleum tank trucks and has been designed to be electronically sealed to provide a sealed parcel delivery system after the loading has been completed. The system eliminates the frustration of verifying deliveries The SCS event information with time and date indication can be printed or uploaded to a PC/OTC The SCS can communicate via GPRS coordinates information (optional)

SCS System Components


Sensor mounted on each manhole to indicate if manhole is open or closed Liberty overfill prevention sensor communicates with CEN type rack monitors wet/dry indicator ROM bottom empty sensor wet/dry indicator API adaptor movement sensor to indicate if API adaptor is open or closed API adaptor liquid sensor to indicate liquid in discharge line wet/dry SCS monitor with power supply and optional wireless ticket printer

About the SCS System


It will prove that the compartments are sealed at the loading point and the quantities conform to the bill of lading At the service station the compartment sealed status can be easily verified so no need for secondary measurement After unloading has been completed, the system will indicate the condition of the compartments and discharge lines

Weight and meassures approved manhole with overfill prevention sensor and SCS Open/Close sensor

API Bottom loading adaptor with Open/Close sensor and Wet/Dry sensor

ROM Bottom empty sensor

PHONE: +31 252 660 300 Fax: +31 252 687 258 Boekweitstraat 1, P Box 32 2150 AA Nieuw-Vennep Netherlands www.opw-ftg.nl .O.

Safety and Control SystemSCS


The SCS System Working Principle
The display on the SCS monitor will indicate at any point of time the status of all the truck compartments and, by scrolling through the system, the status of any part of the SCS system per tank-truck compartment. SEALED After the loading has been completed and the API adapters have been closed, the status of the tank-truck will visually indicate if it is sealed. UNSEALED In case of opening of any of the manholes and/or API adaptors after the loading has been completed and before arriving at the service station, the display of the SCS monitor will switch to an un-sealed status allowing the service station owner to refuse the load. UNSEALED / RESEALED The SCS system eliminates the frustration of verifying deliveries. In the event that one of the compartments cannot be emptied completely, at the push of a button the truck driver can change the status from unsealed to resealed. Delivery information and GPRS coordinates can be uploaded and transferred via GPRS and/or printed. SCS monitors and stores data for 40 days on average.

Typical Components For One Compartment


Printer/PC/GPS
Wet/Dry Open/Close Wet/Dry

API Adaptor ROM Bottom Empty Sensor Liberty Overfill Prevention Sensor Manhole Sensor

Wet/Dry

Open/Close

Gantry Overfill Prevention System

SCS Monitor

SCS system with user-friendly display up to 12 compartments


PHONE: +31 252 660 300 Fax: +31 252 687 258 Boekeitstraat 1, P Box 32 2150 AA Nieuw-Vennep Netherlands www.opw-ftg.nl .O.
Copyright 2007, OPWFTG OPWFTG XX/07 XXX

Liberty Overfill Prevention Systems


Security During Loading and Unloading Procedures
The OPWFTG Civacon Liberty The OPWFTG Civacon Liberty overfill prevention system is designed for tank trucks, tank-truck loading stations (for top and bottom loading), storage depots and service stations. In the event of a possible overfill situation sensed by the Liberty sensors, the Liberty rack monitors output relay will send a signal to a terminal automation system, control valve, or pump, to shutdown the loading operation. The Liberty The Liberty failsafe and self-checking electronic sensors are available as 2-wire Thermistor, 2-wire quick start Optic, or 5-wire Optic. The Liberty on-board control monitors, with diagnostic display, offer 2-wire and 5-wire optic sensor compatibility with all other brands of rack monitors. The ROM The ROM on-board system combines overfill with retain feature of detecting presence of liquid in a compartment prior to loading. All on-board monitors can also be used as stand-alone truck system to close down tank-truck bottom valves in case of an overfull situation. The Liberty system conforms to Atex, Cenelec, and EN standards.

Ordering Specifications
OPW Liberty Overfill Prevention Systems
8500E 8-Channel thermistor and 12-Channel optic monitor with diagnostic display and infrared by-pass switch. Including ground verification.

Trailer Equipment List


1 | Sensor(s): (One Per Compartment) Plus Sensor Cable 2 | On-board Control Monitor / ROM 3 | Rack-Compatible Socket(s) 4 | Retain Bottom Sensor

Loading Rack Equipment


5 | Rack Monitor 6 | Connecting Plug 7 | Plug/Monitor Cord Set

4
Power Supply

7 5 6
To T.A.S. or control valves/ pre-set meter

To tank-truck sensors

PHONE: +31 252 660 300 Fax: +31 252 687 258 Boekweitstraat 1, P Box 32 2150 AA Nieuw-Vennep Netherlands www.opw-ftg.nl .O.

ROM II Plus RetainedOverfill On-Truck Monitoring System


Features and Benefits
Overfill Detection and Bottom Empty Monitoring in one unit ROM II Plus on truck monitor with top and bottom compartment sensors, compatible with all industry standard sensor/rack monitor formats Alerts driver of product in a compartment, loading cannot proceed without activation of the reset circuit Bottom sensor override timer automatically cancels timing when plug removed from socket ROM II Plus monitor automatically closes bottom valves for added overfill prevention Support for up to 8 compartment tankers using 2-wire optic overfill and bottom sensors Support for up to 12 compartment tankers using 5-wire optic overfill sensors only. Number of installed sensors automatically programmed and blocked at installation Compatible with four separate auxiliary input devices (such as brake interlock, vapor return hose connection, etc.), with individual LED confirmation Includes LED socket connection status for proper connection assurance

Status indications of LEDs per compartment: 1 - Overfill situation Steady red light 2 - Wire shortcuts One flash every 5 seconds 3 - No Grounding Two flashes every 5 seconds 4 - Shorted Sensors Three flashes every 5 seconds

Ordering Specifications
RetainedOverfill On-Truck Monitoring System
3204E 8500E 1051 1551 1000R ROMII Plus 8 compartment on-board monitor 8-Channel thermistor and 12-channel optic monitor with diagnostic display ROM 2-wire optic sensor 2-Wire optic sensor quick start ROM 2-wire retain bottom sensor

Typical Installation
Optic Retain Bottom Sensor Optic or Thermistor Top Sensor

Onboard Retain Overfill Monitor

Rack-Compatible Socket(s)

PHONE: +31 252 660 300 Fax: +31 252 687 258 Boekweitstraat 1, P Box 32 2150 AA Nieuw-Vennep Netherlands www.opw-ftg.nl .O.

875 API Dust Cap


Our Civacon 875 API Dust Cap is lightweight and corrosion resistant. Best of all, Civacon API Dust Caps keep their shape, even if dropped or mishandled.

Features and Benefits


Lightweight die-cast aluminum construction for maximum strength Extends valve seal life and protects poppet face of API Ease of operation due to radial cam and lug design Dust cap meets API RP 1004 specification Glass-filled nylon cams eliminate risk of contamination and reduce wear Buna-N seal for increased performance API Dust Cap is lockable Guaranteed up to 3 bar (ADR approved as third point of closure ADR 4.3.4.1.1) Corporate logo and text on API Dust Cap is optional

Ordering Specifications
875 API Dust Cap
875-AL40 API Dust Cap

PHONE: +31 252 660 300 Fax: +31 252 687 258 Boekweitstraat 1, P Box 32 2150 AA Nieuw-Vennep Netherlands www.opw-ftg.nl .O.

Two-Wire Optic Sensor


The OPWFTG Two-Wire Optic Sensors are designed for overfill prevention of liquid petroleum products. The Two-Wire Optic Quick Start Sensor is designed as an alternative for the Two-Wire Thermistor Sensor. Not only are they instantly permissive and specially designed for optimal communication with our 8500Eseries Rack Monitors (conforming to EN13922); but they are also compatible with all other brands of Rack Monitors (which conform to EN13922 standards as well).

Features and Benefits


Conforms to API RP 1004, ATEX and EN13922 Intrinsically safe Self checking Temperature range -20C to +70C Certified for use in zone 0 Instant permissive signal (no warm-up time) Easy adjustable shaft when shorter length is necessary Immediate system shutdown in case of compartment wet detection (250 ms) Immediate re-permit in case of compartment dry detection

1551-007B Two-Wire Optic Sensor

Ordering Specifications
Two-Wire Optic Sensor
1551-007B Adjustable two-wire optic sensor, 7" tube, BSPP quick start, in accordance with , EN13922 standards Adjustable two-wire optic sensor, 16" tube, BSPP quick start, in accordance with , EN13922 standards

1551-0018B

Trailer Equipment List


3
1 | Sensor(s): (One Per Compartment) Plus Sensor Cable 2 | On-board Control Monitor / ROM 3 | Rack-Compatible Socket(s) 4 | Retain Bottom Sensor

Power Supply

4 7
To T.A.S. or control valves/ pre-set meter

Loading Rack Equipment


5 | Rack Monitor 6 | Connecting Plug 7 | Plug/Monitor Cord Set

5 6

To tank-truck sensors

PHONE: +31 252 660 300 Fax: +31 252 687 258 Boekweitstraat 1, P Box 32 2150 AA Nieuw-Vennep Netherlands www.opw-ftg.nl .O.

Five-Wire Optic Sensor


The OPWFTG Five-Wire Optic Sensors are designed for overfill prevention of liquid petroleum products. Not only are they instantly permissive and specially designed for optimal communication with our 8500Eseries Rack Monitors (conforming to EN13922); but they are also compatible with all other brands of Rack Monitors (which conform to EN13922 standards as well).

1111-0018 Five-Wire Optic Sensor

Features and Benefits


Conforms to API RP 1004, ATEX and EN13922 Intrinsically safe Self checking Temperature range -20C to +70C Certified for use in zone 0 Instant permissive signal (no warm-up time) Easy adjustable shaft when shorter length is necessary Continuously checking of system operation such as wiring, sockets and sensor itself Immediate system shutdown in case of compartment wet detection (250 ms) Immediate re-permit in case of compartment dry detection

Ordering Specifications
OPW Five-Wire Optic Sensor
1111-007E 1111-0018E Adjustable five-wire optic sensor, 7" shaft, BSPP in accordance with EN13922 , Adjustable five-wire optic sensor, 18" shaft, BSPP in accordance with EN13922 ,

Trailer Equipment List


3
1 | Sensor(s): (One Per Compartment) Plus Sensor Cable 2 | On-board Control Monitor / ROM 3 | Rack-Compatible Socket(s) 4 | Retain Bottom Sensor

Power Supply

4 7
To T.A.S. or control valves/ pre-set meter

Loading Rack Equipment


5 | Rack Monitor 6 | Connecting Plug 7 | Plug/Monitor Cord Set

5 6

To tank-truck sensors

PHONE: +31 252 660 300 Fax: +31 252 687 258 Boekweitstraat 1, P Box 32 2150 AA Nieuw-Vennep Netherlands www.opw-ftg.nl .O.

Overfill Prevention Sockets


The OPWFTG Liberty Overfill Prevention Sockets are designed for optimal tank-truck to rack system communications. Not only are they instantly permissive and specially designed for optimal communication with our 8500E-series Rack Monitors (conforming to EN13922); but they are also compatible with all other brands of Rack Monitors (which conform to EN13922 standards as well).

Features and Benefits


All sockets conform to API standards The 10-pin socket is designed to conform to EN13922 and make cross-boarder loading/unloading available. Model 4401B also meets VOC requirements. Simple and durable connection by the use of 3 J-slots (4100EURO/PS) or 4 J-slots (4401E/4401B) between socket and connector Durable housing to prevent socket mounting, probe wiring connection and heavy road travel problems Colour-coded labels and caps for easy identification Integral pressure switch standard on 4100PS and 4401B Air brake interlock switch on 4401SQS PIN for tanker earthing incorporated The Thermistor Socket is used to connect up to 8 Thermistor Sensors The Two-Wire Optic Socket is used to connect up to 8 Two-Wire Optical Sensors The Five-Wire Optic Socket is used to connect up to 12 Five-Wire Optical Sensors

4401E Thermistor Socket

4401B 10-pin socket conforms to EN13922 and VOC

Accessories
4150-4150 4450-4450 4450B Replacement cap & cable for 4100E, Blue Replacement cap & cable for 4401E, Green Replacement cap & cable for 4401B, Black, conform EN13922

Ordering Specifications
OPW Liberty Overfill Prevention Sockets
4100E-EURO 4100-PS 4401E 6-pin optical socket, BASEEFA 4100E-EURO with pressure switch conform 94/63EC (VOC) 10-pin thermistor socket, green label and cap 10-pin optic/thermistor socket with pressure switch, black label & cap, conforms to EN13922 and VOC Square 10-pin thermistor socket with break interlock and pressure switch

4401B

4401E-SQS
2

Trailer Equipment List


3
1 | Sensor(s): (One Per Compartment) Plus Sensor Cable 2 | On-board Control Monitor / ROM 3 | Rack-Compatible Socket(s) 4 | Retain Bottom Sensor

Power Supply

4 7
To T.A.S. or control valves/ pre-set meter

Loading Rack Equipment


5 | Rack Monitor 6 | Connecting Plug 7 | Plug/Monitor Cord Set

5 6

To tank-truck sensors

PHONE: +31 252 660 300 Fax: +31 252 687 258 Boekweitstraat 1, P Box 32 2150 AA Nieuw-Vennep Netherlands www.opw-ftg.nl .O.

Two-Wire Retain Bottom Sensor


The OPWFTG Two-Wire Retain Bottom Sensors are designed for detection of retained liquid petroleum products. Not only are they instantly permissive and specially designed for optimal communication with our 8500E-series Rack Monitors (conforming to EN13922); but they are also compatible with all other brands of Rack Monitors (which conform to EN13922 standards as well). Since the Retain Bottom Sensor does not have a warm-up time, the sensor is instantly ready use.

Features and Benefits


Meets requirements of API RP 1004, ATEX and EN13922 Intrinsically safe Temperature range -20C to +70C Instant ready to use (no warm-up time) Certified for use in zone 0 Continuously checking of system operation such as wiring, sockets and sensor itself Immediate system shutdown in case of compartment wet detection (250 ms) Immediate re-permit in case of compartment dry detection

1000R ROM Sensor

Accessories
H70997 Weld coupling (steel or aluminum) for retain bottom sensor

Ordering Specifications
Two-Wire Retain Bottom Sensor
1000R ROM Two-Wire Retain Bottom Sensor

Trailer Equipment List


3
1 | Sensor(s): (One Per Compartment) Plus Sensor Cable 2 | On-board Control Monitor / ROM 3 | Rack-Compatible Socket(s) 4 | Retain Bottom Sensor

Power Supply

4 7
To T.A.S. or control valves/ pre-set meter

Loading Rack Equipment


5 | Rack Monitor 6 | Connecting Plug 7 | Plug/Monitor Cord Set

5 6

To tank-truck sensors

PHONE: +31 252 660 300 Fax: +31 252 687 258 Boekweitstraat 1, P Box 32 2150 AA Nieuw-Vennep Netherlands www.opw-ftg.nl .O.

Two-Wire Thermistor Sensor


The OPWFTG Two-Wire Thermistor Sensors are designed for overfill prevention of liquid petroleum products. Not only are they instantly permissive and specially designed for optimal communication with our 8500E-series Rack Monitors (conforming to EN13922); but they are also compatible with all other brands of Rack Monitors (which conform to EN13922 standards as well).

Features and Benefits


Conforms to API RP 1004, ATEX and EN13922 Intrinsically safe signals Temperature range -20C to +70C Certified for use in zone 0 Shaft adjusts easily when shorter length is necessary Continuously checking of system operation such as wiring, sockets and sensor itself Immediate system shutdown in case of compartment wet detection (250 ms) Immediate re-permit in case of compartment dry detection

1511-007B Two-Wire Thermistor Sensor

Ordering Specifications
OPW Two-Wire Thermistor Sensor
1511-007B Two-Wire Thermistor Sensor, 7" shaft, BSPP conforms to EN13922 ,

Accessories
1601-1601 Replacement thermistor tip, conforms to EN13922 1 Trailer Equipment List
1 | Sensor(s): (One Per Compartment) Plus Sensor Cable 2 | On-board Control Monitor / ROM 3 | Rack-Compatible Socket(s) 4 | Retain Bottom Sensor

Loading Rack Equipment


5 | Rack Monitor 6 | Connecting Plug 7 | Plug/Monitor Cord Set

Power Supply

4 7
To T.A.S. or control valves/ pre-set meter

5 6

To tank-truck sensors

PHONE: +31 252 660 300 Fax: +31 252 687 258 Boekweitstraat 1, P Box 32 2150 AA Nieuw-Vennep Netherlands www.opw-ftg.nl .O.

Tank Systems From A to Z

Petroleum Manhole Assembly

Sequential Vapor Valves

Seal Parcel Delivery

Overfill Detection and Electronics

Vapor Recovery Components

Pneumatic Control Unit

Bottom Loading Components

CivaFlo Manifold Systems

Bottom Valves

PHONE: +31 252 660 300 Fax: +31 252 687 258 Boekweitstraat 1, P Box 32 2150 AA Nieuw-Vennep Netherlands www.opw-ftg.nl .O.

You might also like