GSM Inter MSC Handover Source MSC Call Flow
GSM Inter MSC Handover Source MSC Call Flow
GSM Inter MSC Handover Source MSC Call Flow
0 GSM Mobile Vienna (Target) Bethesda (Source) Mobile Vienna Cell Vienna BSC Vienna MSC Bethesda Bethesda Bethesda 25-Jan-08 07:26 (Page 1) VLR MSC VLR BSC Cell Voice Voice Call is in conversation. The voice path from the mobile is routed to the PSTN via the Bethesda MSC. BSSMAP HANDOVER REQUIRED The BSC decides to request a handover. A list of target cells is provided to the MSC. The Vienna Cell Target Cells, Origin Cell is included in the list of target cells. MAP PREPARE HANDOVER This is an inter MSC handover, so pass the handover request to the target MSC via a MAP Target Cells, Origin Cell message. T101 The MSC-VLR starts a timer to await the response from the Vienna BSC. MAP PREPARE HANDOVER RESPONSE Pass the handover request acknowledgement from the target MSC to the source MSC. The message RR HANDOVER COMMAND, also includes the handover number to call for the Handover Number inter-MSC voice call. T101 The MSC has heard back from the destination MSC, thus the T101 timer is stopped. ISUP IAM The Bethesda MSC initiates a voice call to the Vienna MSC. The call is initiated with the ISUP Handover Number Initial Address Message (IAM) addressed to the "Handover Number". ISUP ACM The Vienna MSC accepts the call with the Address Complete (ACM) message. BSSMAP HANDOVER COMMAND The MSC delivers the handover command to the Bethesda BSC. This command encapsulates the RR RR HANDOVER COMMAND HANDOVER COMMAND from the destination BSC. T102 T102 is started to track the completion of the handover. MAP ACCESS SIGNALING REQUEST The Handover detect is signalled to the Bethesda MSC via the Access Signaling Request message. HANDOVER DETECTED MAP SEND END SIGNAL
HANDOVER COMPLETE
Transport the Handover Complete message to the source MSC. The Vienna MSC answers the inter-MSC voice call. Handover has been completed, so T102 is stopped. Call release has been completed, now the RR connection is released by the MSC. The BSS informs the the MSC that the RR connection has been released. Call is in conversation after the handover. Note that the voice path to the PSTN is via the source MSC. The destination MSC routes the voice on the ISUP call between the two MSCs. Subscribers have hung up. The source MSC releases the voice circuit between the two MSCs. ISUP release complete. The handed over call has ended.
ISUP ANS T102 BSSMAP CLEAR COMMAND BSSMAP CLEAR COMPLETE Voice Voice