Scribd Logo
Upload

Welcome to Scribd!

  • 555 views

    Epson Pro 3880 Start Here

    Uploaded by

    bmmanuals
    Epson Stylus Pro 3880 uses USB or Ethernet interface. Printer weighs about 43 pounds (20 kilograms) and should be lifted and moved by two people. If you see the message that the installer has detected an older version of EpsonNet Config on your system, uninstall the old version.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Epson Pro 3880 Start Here

    Uploaded by

    bmmanuals
    555 views2 pages
    Epson Stylus Pro 3880 uses USB or Ethernet interface. Printer weighs about 43 pounds (20 kilograms) and should be lifted and moved by two people. If you see the message that the installer has detected an older version of EpsonNet Config on your system, uninstall the old version.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Epson Stylus Pro 3880 uses USB or Ethernet interface. Printer weighs about 43 pounds (20 kilograms) and should be lifted and moved by two people. If you see the message that the installer has detected an older version of EpsonNet Config on your system, uninstall the old version.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    555 views2 pages

    Epson Pro 3880 Start Here

    Uploaded by

    bmmanuals
    Epson Stylus Pro 3880 uses USB or Ethernet interface. Printer weighs about 43 pounds (20 kilograms) and should be lifted and moved by two people. If you see the message that the installer has detected an older version of EpsonNet Config on your system, uninstall the old version.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Epson Stylus Pro 3880

    Start Here
    Unpack
    1
    Make sure you have these items:
    Users Guide

    Turn On the Printer


    1
    Connect the power cable. (Do not connect the printer cable yet.)

    Install Software for a USB Connection


    Your printer software works with Windows 7, Windows Vista, XP Professional x64 Edition, Windows XP, and Macintosh OS X 10.5.8 to 10.7. If you are using the USB interface, follow the steps below to install the printer software. If you are using the Ethernet interface, follow the steps in Chapter 1 of the User's Guide to configure the printer and install the software.

    Macintosh 1 2
    Press the power button.
    Ink cover

    Make sure your Macintosh and printer are turned on. Connect a USB cable. Use any open USB port on your computer. Make sure the Epson Stylus Pro 3880 is securely connected.

    Printer

    Power cord

    CD-ROM

    After a minute, the ink cover is automatically released.

    Ink cartridges

    Rear sheet guide

    Limited Warranty

    Install Ink Cartridges


    1
    Lift the ink cover.
    Note: If the ink cover is locked, press the ink cover open button on the control panel to release it.

    Warning: The printer weighs about 43 pounds (20 kilograms) and should be lifted and moved by two people. Note: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability.

    Insert the Epson Stylus Pro 3880 software CD.

    Remove all the packing materials and tape. Check carefully for all the tape inside and outside the printer. Save the box and packaging in case you need to ship the printer.

    Unpack the 9 ink cartridges and shake each one gently.

    Double-click the Epson Stylus Pro 3880 icon.

    3
    Press the front cover to open it.

    Install each cartridge in the correct slot for its color. The arrow mark should be on top and pointing into the printer.
    Caution: Do not touch the green chip on top of the cartridge.
    Arrow Push each cartridge in until it clicks.

    Note: If you see the message that the installer has detected an older version of EpsonNet Config on your system, you must uninstall the old version before you can install the new one. To uninstall, drag the EpsonNet folder to the trash. Then reinstall your printer software.

    5 6

    Follow the on-screen instructions to install all the necessary software and manuals and register your printer. Restart the Macintosh when prompted.

    4 3
    Open the top cover and remove the carriage retainer bracket. Then close the cover.

    After you install all 9 ink cartridges, close the cover.

    The printer starts charging the ink. This takes 7 or 8 minutes. The LCD displays READY when charging is complete.
    Caution: Do not turn off or unplug the printer while the power light is flashing and you see the message CHARGING INK on the LCD. Also, do not lift the ink cover or load paper during the process. Note: The first time you install ink cartridges, the printer uses some ink to charge the printing system, so print yields may be lower with the first cartridges. Subsequent ink cartridges will last for their full rated life.

    Windows 1
    Make sure the Epson Stylus Pro 3880 is NOT CONNECTED to your computer.

    Load Paper
    You can load paper in the auto sheet feeder, the rear manual feed slot, or the front manual feed slot. In the front or rear slot, load just one sheet at a time. Follow the instructions below to load paper in the auto sheet feeder or the rear manual slot. To load special media in the front slot, see the Users Guide.
    Note: Some paper types cannot be loaded in the auto sheet feeder. Check the Users Guide to make sure you are using the correct paper path for your media.

    Slide the left edge guide to the left. Then load one sheet of paper short edge first, glossy or brighter side face up, and slide the left edge guide against the paper.

    Auto Sheet Feeder 1


    Note: If you see a Found New Hardware screen, click Cancel and disconnect the USB cable. You cant install your software that way.

    Flip open the paper guide and pull out its extensions to accommodate your paper size.

    Gently guide the paper straight into the slot until it meets resistance, maintaining a constant pressure; after about 3 seconds the printer will pull the paper into position.

    Insert the Epson Stylus Pro 3880 software CD.

    2
    With Windows 7 and Windows Vista, if you see the AutoPlay window, click Run Setup.exe. When you see the User Account Control screen, click Yes.

    Press the front cover to release it and open the output tray.

    Open the output tray and lift it into position. Make sure the arrow marks on the tray and inside the printer are aligned. Pull out the extensions as needed for your paper size.

    Click Install.

    Use both hands to pull out and extend the output tray, lifting it slightly as you pull. Make sure the arrow marks on the tray and inside the printer are aligned.

    Any Questions?
    Look here for answers:

    Users Guide

    Connect a USB cable when prompted. Use any open USB port on your computer.

    Instructions for using your printer. See Chapter 1 to install the printer software if you are connecting the printer on a network. You can also double-click the Epson Stylus Pro 3880 Guide desktop icon to view the on-screen Users Guide.

    On-screen Network Guide


    Pull out the extensions as needed for your paper size. Instructions for configuring the printer for a network.

    On-screen help with your software


    Select Help or ? when youre using your software.

    Epson Technical Support

    5 6

    Follow the on-screen instructions to install all the necessary software and manuals and register your printer. When youre done, click Exit and eject the CD.

    Internet Support Visit Epsons support website at epson.com/support and select your product for solutions to common problems. You can download drivers and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions.

    Squeeze the left edge guide and slide it to the left. Then load your paper against the right edge guide short edge first, glossy or brighter side face up. Squeeze the left edge guide and slide it against the paper.

    Epson PreferredSM Protection Plan Call (888) 377-6611. Make sure you have your Epson Preferred Unit ID number. If you have any difficulty with this service, call (562) 276-1305. You can purchase a one- or two-year extended service plan through your Epson authorized reseller or from Epson.

    Need Ink and Paper?


    For the best prints, use genuine Epson ink and paper. You can purchase them from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can also purchase genuine Epson ink and paper online at www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).

    Rear Manual Slot 1


    Attach the rear sheet guide by inserting the tabs as shown.

    Epson and Epson Stylus are registered trademarks and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation. Epson Preferred is a service mark of Epson America, Inc. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. This information is subject to change without notice. 2011 Epson America, Inc. 10/11 Printed in USA CPD-27472R1

    You might also like