Vitor S Workshop
Vitor S Workshop
Vitor S Workshop
low-cost extension of the receiver display channel logo and EPG data of the current channel can be displayed permanently also available for weather forecasts with data from the Internet some Linux experience recommended
126 TELE-satellite International The Worlds Largest Digital TV Trade Magazine 06-07-08/2012 www.TELE-satellite.com
www.TELE-satellite.com 06-07-08/2012 TELE-satellite International
127
for that to really work the picture frame obviously needs to come with a USB interface. While most digital picture frames these days fulfil this requirement without even the blink of an eye, most are set up as a USB host, which means the USB interface can only be used to read out a USB storage medium and to display the image files that are stored on that medium. Unfortunately, those models wont
1
all too simple: The receiver generates an image file with the required content and sends the file to the picture frame which in turn instantly displays that file. In order
1, 2, 3: A digital picture frame displays the logo of the currently selected channel. Whenever a new channel is selected the display will change accordingly.
128 TELE-satellite International The Worlds Largest Digital TV Trade Magazine 06-07-08/2012 www.TELE-satellite.com
1
1. Digital picture frame with the AX206 chipset. These models are perfectly suited for our workshop. 2. The receiver menu can also be displayed on the digital picture frame. 3. Even the weather forecast can be shown on the picture frame. All required data is downloaded thanks to the Internet connection of the AZBox.
work with the AZBox ME. There are, however, some types of digital picture frames that allow accessing their internal memory right from a PC, which means the picture frame must come with an USB slave connection. In such a case the picture frame acts like any other USB device that can be controlled from a PC. If we now decide to hook up such a suitable picture frame to
our Linux receiver we first have to modify its default firmware. Instead of waiting for a user to press a button in order to activate the connection to the PC the picture frame has to react immediately to all incoming files and must display them without delay. Fully modified firmware versions are available for two specific types of digital picture frames. If you search the web you will easily find them. All you need to make sure is the right firmware version is used for the corresponding frame. You should also make a point of flashing the new firmware precisely as you are instructed. Some digital picture frames from Samsung are suitable for our experiment, notably the SPF-72H, SPF-75H, SPF-83H,
SPF-85H, SPF-85P, SPF-87H, SPF-105P, SPF-107H and SPF-700T models. Numerous other inexpensive makes can also be used, provided they come with an AX206 controller chipset and a resolution of 320 x 200 pixels. These AX206 picture frames are equipped with an integrated battery pack which is of no use to us since the display draws its power from the USB connection anyway. Its a wise move to remove the battery pack since this eliminates a potential source of problems. You only need to unscrew and remove four screws on the backside, lift the back cover and look for the blue battery pack which is hard to miss. Cut the two (red and black) wires using a small sidecutter, keeping in mind to make the cut as close as possible to the circuit board without risking a short circuit. Now that all hardware requirements are met you need to install the lcd4linux plug-in on your AZBox ME. Our first two attempts on one of the two official firmware versions were not met with success because the lcd4linux plug-in requires some libraries that were missing in our firmware. These are the lacking libraries we obtained from the Internet:
libpython2.6-1.0_2.6.7-ml8. 2_mipsel.ipk python-imaging_1.1.6-ml1_mipsel. ipk python-textutils_2.6.7-ml8. 2_mipsel.ipk
Then we were finally able to install the lcd4linux plug-in and complete all the configuration steps. Unfortunately, however, the LCD display of our digital picture frame remained dark. As it turned out our Linux distribution was still
130 TELE-satellite International The Worlds Largest Digital TV Trade Magazine 06-07-08/2012 www.TELE-satellite.com
TFT Flashing
1, 2: Using a tool with the modified firmware that is stored in the archive you first have to flash the digital picture frame with the help of a PC.
not entirely complete, even with all the above listed libraries and packages installed. Thankfully there is the Internet and after a quick search we discovered a special lcd4linux plug-in which once installed replaced the original plug-in by the same name. The new plug-in once and for all featured all required routines so that we were finally able to use our picture frame. If you speak or understand German you may want to look at the German-language MyAZBox forum for a detailed summary of all required steps: http://www.myazbox.de/forum/index. php?page=Thread&postID=52421. Thanks to the plug-in a number of options are available to display the name of the currently selected channel, show content information on the current and next events and the like. The absolute high point is a feature that allows displaying channel logos. All you need to do is copy them to the /usr/ shared/picons directory. Since standard channel logo packages have a different resolution than the digital picture frame we recommend the installation of dedicated picons packages for the picture frame. If required, these packages can even be copied to a separate directory so that they are available with different
3: The linux4lcd file can be found in the plug-in menu. 4: This is where linux4lcd should appear after successful installation of the plug-in and re-start of the receiver. 5: It is possible to save the numerous configuration options of the linux4lcd plug-in and retrieve them at a later stage when you want or need to update the receivers firmware, for instance. 6: The first menu item takes care of the basic settings of the picture frame. 7: You can define the city for the weather forecast here the plug-in then uses the Internet connection of the AZBox ME to load the corresponding data and to keep the forecast up-to-date. 8: The next step of the configuration process deals with the default layout that is comes up every time the receiver is switched on. This is where you can choose to display the channel logo, among other things. 9: You decide about how your external panel looks all elements can be arranged freely on the display. 10: Another option group allows activating a different display layout whenever the media player is active. It is possible to show the title of the currently playing movie or song information. 11: Due to the sheer range of options it takes some time until the display looks just the way you like it. Luckily, the plug-in visualises all changes right away so that you can always keep an eye on the final result.
resolutions for different purposes such as OSD inserts, for example. We do have to admit at this point that the whole setup was not yet 100% reliable and after a few minutes the picture frame went black and could only be reactivated by turning it off and then on again. At the same time we found out that a new firmware distribution for the AZBox ME was being launched and obviously we gave it a go right away. What a wise move that was, because all that was left for us to do was to install the current lcd4linux plug-in for the picture frame to come back to life. It was not even necessary to manually install additional libraries or packages the picture
frame has been running smoothly and flawlessly ever since. Occasional hiccups do not bother us any longer since this special version of the picture frame firmware goes into a stable mode whenever a problem occurs. In summary, we can state that our AZBox ME never ceases to surprise and impress us, and now it even comes with an external colour display for additional information such as channel logo, event name, duration, weather, etc. Whats more, we now have installed three entirely different firmware versions on our AZBox ME and its for us to decide whether we only want to watch TV or rather prefer to explore the depths of the DX world.
6 10
7 11
132 TELE-satellite International The Worlds Largest Digital TV Trade Magazine 06-07-08/2012 www.TELE-satellite.com
133