Farmhouse Bench From The Handbuilt Home by Ana White
Farmhouse Bench From The Handbuilt Home by Ana White
Farmhouse Bench From The Handbuilt Home by Ana White
te
PROJECT
N 11
far mh ous e
BE NC H
SHOPPING LIST
TOOLS
2 8'-long 1x12s
2 8'-long 1x2s
Jigsaw
2 8'-long 1x3s
Circular saw
Wood glue
Finish nailer
CUTTING LIST
2 17"-long 1x12s (sides)
59 1 2"
18"
DIMENSIONS
TJ8-5-2012 IMUS 7/CRA0334 The Handbuilt Home W:8.5"xH:10.875" 175L Ex128 chenming M/A Magenta
13"
The farmhouse bench measures 59" wide by 13" deep by 18" tall (151cm x 33cm
x 45.5cm). It is designed to seat three adults and is standard seating height.
76
76
TJ8-5-12 P068-083 175L CTP.indd 76
20/06/2012 08:23
BUILT BY
RE BE CC A RID NE R
T H E D I N I N G RO O M | 7 7
TJ8-5-2012 IMUS 7/CRA0334 The Handbuilt Home W:8.5"xH:10.875" 175L Ex128 chenming M/A Magenta
BeccaDaleDesigns.com
77
TJ8-5-12 P068-083 175L CTP.indd 77
20/06/2012 10:54
C UT TI N G E N D S
A few pretty details can add
considerable charm to a basic bench.
Mark the boards cut for the sides as
shown in the diagram, and carefully cut
them out with a jigsaw. Sand the edges
until smooth.
2 B OT TO M S H E LF
17 1 4"
3 B E N C H TO P
Mark the underside of the bench top 3"
(7.5cm) from the outside edge on both
ends. Apply wood glue to the tops of
the legs. Position the bench top on the
legs, matching marks for overhangs.
Nail the bench top to the legs with 2"
(5cm) finish nails.
4"
5 3 4"
5"
"
34
4 TO P TR I M E N DS
Using the diagram to guide you, create
a pattern for the ends of the top trim.
Cut out with a jigsaw, and use this
pattern to cut decorative ends on the
bench side top trim. After cutting, sand
the edges until smooth.
AT TAC H I N G TO P TR I M
TJ8-5-2012 IMUS 7/CRA0334 The Handbuilt Home W:8.5"xH:10.875" 175L Ex128 chenming M/A Magenta
52"
4"
2" nails or screws
from outside
6 S I D E TR I M
Apply glue to the exposed edges of
legs and " (2cm) in on the bottom
shelf. Nail the leg trim to the legs with
2" (5cm) nails, keeping outside edges
flush. Also nail the trim to the bottom
shelf for increased strength and
support.
59 1 2"
B OT TO M S H E LF TR I M
Check to make sure the bottom shelf
trim fits well, trimming if necessary.
Remove and apply glue along edge
of bottom shelf. With top edges flush,
attach bottom shelf trim to bottom shelf
with 2" (5cm) nails. Add two nails per
end through the outside of the leg
trim into the end grain of the bottom
shelf trim.
78
78
TJ8-5-12 P068-083 175L CTP.indd 78
20/06/2012 08:23
1"
2 1 2"
3"
59 1 2"
15 1 2"
50 1 2"
T H E D I N I N G RO O M | 7 9
TJ8-5-2012 IMUS 7/CRA0334 The Handbuilt Home W:8.5"xH:10.875" 175L Ex128 chenming M/A Magenta
79
TJ8-5-12 P068-083 175L CTP.indd 79
20/06/2012 08:23