INTRODUCTION

In the existing system, most of the records are maintained on paper. It becomes very
inconvenient to modify the data. In the existing system, here is a possibility that the same data in
different registers may have different values which means the entries of the same data do not
match. This inconsistent state does not supply the concrete information which poses a problem in
the case information related to particular search record.
Our project is very useful. User is no longer required to check his register in search of records, as
now it can be searched over the software by choosing some options. The user need not to type in
most of the information. He/she is just required to enter the desired options. On the whole it
liberates the user from keeping lengthy manual records. In a nutshell, it abates the work load of
an organization.
In todays world, no one likes to perform calculations on calculator or manually when computer
is there. Every one wants his/her work to be done by computer automatically and displaying the
result for further manipulations.

PROPOSED SYSTEM
The following documentation is a project the Name of the term paper allotted. It is a detailed
summary of all the drawbacks of the old system and how the new proposed system overcomes
these shortcomings. The new system takes into account the various factors while designing a
new system. It keeps into the account the Economical bandwidth available for the new system.
The foremost thing that is taken care of is the Need and Requirements of the User.
DESCRIPTION
Before developing software we keep following things in mind that we can develop powerful and
quality software

PROBLEM STATEMENT
o Problem statement was to design a module:
o Which is user friendly
o Which will restrict the user from accessing other users data.
o Which will help user in viewing his data and privileges.
o Which will help the administrator to handle all the changes.
FUNCTIONS TO BE PROVIDED:
The system will be user friendly and completely menu driven so that the users shall have no
problem in using all options.
o The system will be efficient and fast in response.
o The system will be customized according to needs.
**Write according to you project
o (View
o Add
o Delete
o Modify)

SYSTEM REQUIRMENTS
o
o
o
o
o

Operating system:
MS Windows XP or Windows Vista
Language: C Language
Processor: Pentium IV Processor
RAM: 512 MB
Hard disk: 5 GB
REQUIREMENT ANALYSIS

This process is adopted when management of the system development, Personnel decide that the
particular system needs improvement. The system development life cycle is the set of activities,
carried out by the analyst, designers and users to develop and implement a system. The systems
that are present in the nature follow common life cycle pattern. For example consider the raining
system. Initially the rain falls into the river, river flows into sea, the sea water evaporates to form
vapors, the vapors form clouds which again bring rain. Similarly consider a man made system
initially a system is analyzed, designed and made operational by the efforts of system analysis.
After successful operation or a number of users, the system becomes less and less effective by
change in the environment. So these changes have to be incorporated in to the system by minor
modifications. So the general activities from the life cycle of the system are given below:
Select ion and identification of the system to be studied
Preliminary study
Defining the system
Design and development of the system
Implementation of the system
SYSTEM DESIGN
Then we began with the design phase of the system. System design is a solution, a HOW
TO approach to the creation of a new system. It translates system requirements into
ways by which they can be made operational. It is a translational from a user oriented
document to a document oriented programmers. For that, it provides the understanding
and procedural details necessary for the implementation. Here we use Flowchart to
supplement the working of the new system. The system thus made should be reliable,
durable and above all should have least possible maintenance costs. It should overcome
all the drawbacks of the Old existing system and most important of all meet the user

requirements.
START

Welcome to library management

Enter
your

choice
?

members

book

reports

help

Do you want to
continue?

STOP

PROBLEM ANALYSIS
In the Library Management System project we can add or remove the details
of books and if we want to search any book record then we easily find the
book record through this software.

FEASIBILITY ANALYSIS
Once scope has been identified (with the concurrence of the customer), it is
reasonable to ask: Can we build software to meet this scope? Is the project
feasible? All too often, software engineers rush past these questions (or are
pushed past them by impatient managers or customers), only to become mired
in a project that is doomed from the onset. Putnam and Myers [PUT97a] address
this issue when they write:. . . not everything imaginable is feasible, not even in
software, evanescent as it may appear to outsiders. On the contrary, software
feasibility has four solid dimensions: TechnologyIs a project technically feasible? Is
it within the state of the art? Can defects be reduced to a level matching the
applications needs? FinanceIs it financially feasible? Can development
be completed at a cost the software organization, its client, or the market can afford?
TimeWill the projects time-to-market beat the competition? ResourcesDoes the
organization
have the resources needed to succeed?

TESTING
Testing is the major control measure used during software development. Its basic function is to
detect errors in the software. During requirement analysis and design, the output is a document
that is usually textual and no executable. After the coding phase, computer programs are
available that can be executed for testing purpose. This implies that testing not only, has to
uncover errors introduced during coding, but also errors introduced during previous phase. Thus
the goal of testing is to uncover the requirements, design and coding errors in the programs. So
after testing the outputs of my project are as follows:

Source code
//**********************************************************
// PROJECT BOOK LIBRARY
//**********************************************************
//**********************************************************
// INCLUDED HEADER FILES
//**********************************************************
# include <iostream.h>
# include <fstream.h>
# include <process.h>
# include <string.h>
# include <stdlib.h>
# include <stdio.h>
# include <ctype.h>
# include <conio.h>
# include <dos.h>

//**********************************************************
// THIS CLASS CONTROL ALL THE FUNCTIONS IN THE MENU
//**********************************************************
class MENU
{
public :
void main_menu(void) ;
void introduction(void) ;
private :
void edit_menu(void) ;
void edit_book(void) ;
void edit_member(void) ;
};
//**********************************************************
// THIS CLASS CONTAINS FUNCTIONS RELATED TO BOOKS
//**********************************************************
class BOOK
{
public :
void list(void) ;
char *bookname(int) ;
protected :
void add_new_book(int, char tname[33], char tauthor[26], float, int, int) ;
void update_copies(int, int, int) ;
void modify(int, char[], char[], float) ;
void deletion(void) ;
int book_found(int) ;
int bookname_found(char []) ;
int recordno(int) ;
int available(int) ;
char *authorname(int) ;
float bookprice(int) ;
int no_of_copies(int) ;
int bookcodeof(char[]) ;
void display(int) ;
int reccount(void) ;
void delete_rec(int) ;
private :
int bookcode, copies ;
char name[33], author[26] ;
float price ;
int avail ;

};
//**********************************************************
// THIS CLASS CONTAINS FUNCTIONS RELATED TO MEMBERS
//**********************************************************
class MEMBER
{
public :
void list(void) ;
protected :
void add_mem(int, int, char [], char [], char[], int, int, int) ;
void modify(int, char[], char[], char[]) ;
void deletion(void) ;
int member_found(int) ;
void update_book(int, int, int, int, int) ;
char *membername(int) ;
char *memberphone(int) ;
char *memberaddress(int) ;
int recordno(int) ;
int lastcode(void) ;
int issued(int) ;
int fine(int) ;
void display(int) ;
void delete_rec(int) ;
private :
int memcode, bookcode ;
char name[26], phone[10], address[33] ;
int dd, mm, yy ; // DATE OF RETURNING THE BOOK //
};
//**********************************************************
// THIS IS DERIVED FROM CLASS BOOK & MEMBER AND CONTAINS
// FUNCTIONS FOR WORKING (ISSUE,RETURN,ETC).
//**********************************************************
class WORKING : public BOOK, public MEMBER
{
public :
void issuebook(void) ;
void returnbook(void) ;
void add_book(void) ;
void add_member(void) ;
void modify_book(void) ;
void modify_member(void) ;

void delete_book(void) ;
void delete_member(void) ;
};
//**********************************************************
// THIS CLASS CONTAINS FUNCTIONS RELATED DATE & FINE
//**********************************************************
class DATE
{
public :
void extend_date(int,int,int,int) ;
int diff(int, int, int, int, int, int) ;
int day, mon, year ;
};
//**********************************************************
// FUNCTION TO EXTEND GIVEN DATE BY 15 DAYS
//**********************************************************
void DATE :: extend_date(int d1, int m1, int y1, int days)
{
static int month[] = {31,29,31,30,31,30,31,31,30,31,30,31} ;
for (int i=1; i<=days; i++)
{
d1++ ;
if ((d1 > month[m1-1]) || (y1%4 != 0 && m1 == 2 && d1 > 28))
{
d1 = 1 ;
m1++ ;
}
if (m1 > 12)
{
m1 = 1 ;
y1++ ;
}
}
day = d1 ;
mon = m1 ;
year = y1 ;
}
//**********************************************************
// THIS FUNCTION RETURN THE DIFFERENCE BETWEEN TWO GIVEN
// DATES
//**********************************************************

int DATE :: diff(int d1, int m1, int y1, int d2, int m2, int y2)
{
int days = 0 ;
if ((y2<y1) || (y2==y1 && m2<m1) || (y2==y1 && m2==m1 && d2<d1))
return days ;
static int month[] = {31,29,31,30,31,30,31,31,30,31,30,31} ;
while (d1 != d2 || m1 != m2 || y1 != y2)
{
days++ ;
d1++ ;
if ((d1 > month[m1-1]) || (y1%4 != 0 && m1 == 2 && d1 > 28))
{
d1 = 1 ;
m1++ ;
}
if (m1 > 12)
{
m1 = 1 ;
y1++ ;
}
}
return days ;
}
//**********************************************************
// FUNCTION TO DISPLAY MAIN MENU & CONTROL ALL THE FUNCTION
// IN THE MAIN MENU.
//**********************************************************
void MENU :: main_menu(void)
{
char ch ;
while (1)
{
clrscr() ;
gotoxy(29,6) ;
cout <<"B O O K L I B R A R Y" ;
gotoxy(29,7) ;
cout <<"~~~~~~~~~~~~~~~~~~~~~~" ;
gotoxy(30,10) ;
cout <<"1. INTRODUCTION" ;
gotoxy(30,11) ;
cout <<"2. ADD NEW BOOK" ;
gotoxy(30,12) ;
cout <<"3. ADD NEW MEMBER" ;

gotoxy(30,13) ;
cout <<"4. ISSUE BOOK" ;
gotoxy(30,14) ;
cout <<"5. RETURN BOOK" ;
gotoxy(30,15) ;
cout <<"6. LIST OF BOOKS" ;
gotoxy(30,16) ;
cout <<"7. LIST OF MEMBERS" ;
gotoxy(30,17) ;
cout <<"8. EDIT" ;
gotoxy(30,18) ;
cout <<"0. QUIT" ;
gotoxy(30,20) ;
cout <<"Enter your choice : " ;
ch = getche() ;
if (ch == 27)
break ;
else
if (ch == '1')
introduction() ;
else
if (ch == '2')
{
WORKING W ;
W.add_book() ;
}
else
if (ch == '3')
{
WORKING W ;
W.add_member() ;
}
else
if (ch == '4')
{
WORKING W ;
W.issuebook() ;
}
else
if (ch == '5')
{
WORKING W ;
W.returnbook() ;
}
else
if (ch == '6')

{
BOOK B ;
B.list() ;
}
else
if (ch == '7')
{
MEMBER M ;
M.list() ;
}
else
if (ch == '8')
edit_menu() ;
else
if (ch == '0')
break ;
}
}
//**********************************************************
// FUNCTION TO DISPLAY EDIT MENU
//**********************************************************
void MENU :: edit_menu(void)
{
char ch ;
while (1)
{
clrscr() ;
gotoxy(32,9) ;
cout <<"E D I T M E N U";
gotoxy(32,10) ;
cout <<"~~~~~~~~~~~~~~~~" ;
gotoxy(34,13) ;
cout <<"1. BOOKS" ;
gotoxy(34,14) ;
cout <<"2. MEMBERS" ;
gotoxy(34,15) ;
cout <<"0. EXIT" ;
gotoxy(31,17) ;
cout <<"Enter your choice : " ;
ch = getche() ;
if (ch == 27)
break ;
else
if (ch =='1')

edit_book() ;
else
if (ch == '2')
edit_member() ;
else
if (ch == '0')
break ;
}
}
//**********************************************************
// FUNCTION TO DISPLAY EDIT MENU FOR BOOK & CONTROL
// ALL THE FUNCTION IN THE EDIT MENU.
//**********************************************************
void MENU :: edit_book(void)
{
char ch ;
while (1)
{
clrscr() ;
gotoxy(31,9) ;
cout <<"E D I T B O O K S";
gotoxy(31,10) ;
cout <<"~~~~~~~~~~~~~~~~~~" ;
gotoxy(34,13) ;
cout <<"1. MODIFY" ;
gotoxy(34,14) ;
cout <<"2. DELETE" ;
gotoxy(34,15) ;
cout <<"0. EXIT" ;
gotoxy(31,17) ;
cout <<"Enter your choice : " ;
ch = getche() ;
if (ch == 27)
break ;
else
if (ch =='1')
{
WORKING W ;
W.modify_book() ;
}
else
if (ch == '2')
{
WORKING W ;

W.delete_book() ;
}
else
if (ch == '0')
break ;
}
}
//**********************************************************
// FUNCTION TO DISPLAY EDIT MENU FOR MEMBERS & CONTROL
// ALL THE FUNCTION IN THE EDIT MENU.
//**********************************************************
void MENU :: edit_member(void)
{
char ch ;
while (1)
{
clrscr() ;
gotoxy(29,9) ;
cout <<"E D I T M E M B E R S";
gotoxy(29,10) ;
cout <<"~~~~~~~~~~~~~~~~~~~~~~" ;
gotoxy(34,13) ;
cout <<"1. MODIFY" ;
gotoxy(34,14) ;
cout <<"2. DELETE" ;
gotoxy(34,15) ;
cout <<"0. EXIT" ;
gotoxy(29,17) ;
cout <<"Enter your choice : " ;
ch = getche() ;
if (ch == 27)
break ;
else
if (ch == '1')
{
WORKING W ;
W.modify_member() ;
}
else
if (ch == '2')
{
WORKING W ;
W.delete_member() ;
}

else
if (ch == '0')
break ;
}
}
//**********************************************************
// FUNCTION TO DISPLAY THE INTRODUCTION FOR THE PROJECT.
//**********************************************************
void MENU :: introduction(void)
{
clrscr() ;
gotoxy(31,5) ;
cout <<"Welcome to Project" ;
textcolor(BLACK+BLINK) ; textbackground(WHITE) ;
gotoxy(33,7) ;
cprintf(" BOOK LIBRARY ") ;
textcolor(LIGHTGRAY) ; textbackground(BLACK) ;
gotoxy(15,10) ;
cout <<"This project has facility of maintaining records" ;
gotoxy(15,11) ;
cout <<"of BOOKS and MEMBERS." ;
gotoxy(15,13) ;
cout <<"This project can hold more than 10,000 books" ;
gotoxy(15,14) ;
cout <<"records." ;
gotoxy(15,16) ;
cout <<"One member can issue one book at a time. If he/she" ;
gotoxy(15,17) ;
cout <<"does not return book upto 15 days he/she have to" ;
gotoxy(15,18) ;
cout <<"pay fine of Rs.2/- per day." ;
textcolor(LIGHTGRAY+BLINK) ;
gotoxy(27,24) ;
cprintf("Press any key to continue") ;
textcolor(LIGHTGRAY) ;
getch() ;
}
//**********************************************************
// THIS FUNCTION RETURN 0 IF GIVEN BOOK CODE NOT FOUND
//**********************************************************
int BOOK :: book_found(int tcode)
{

fstream file ;
file.open("BOOK.DAT", ios::in) ;
file.seekg(0,ios::beg) ;
int found=0 ;
while (file.read((char *) this, sizeof(BOOK)))
{
if (bookcode == tcode)
{
found = 1 ;
break ;
}
}
file.close() ;
return found ;
}
//**********************************************************
// THIS FUNCTION RETURN 0 IF GIVEN BOOK NAME NOT FOUND
//**********************************************************
int BOOK :: bookname_found(char t1code[33])
{
fstream file ;
file.open("BOOK.DAT", ios::in) ;
file.seekg(0,ios::beg) ;
int found=0 ;
while (file.read((char *) this, sizeof(BOOK)))
{
if (!strcmpi(name,t1code))
{
found = 1 ;
break ;
}
}
file.close() ;
return found ;
}
//**********************************************************
// THIS FUNCTION RETURN RECORD NO. FOR THE BOOK CODE
//**********************************************************
int BOOK :: recordno(int tcode)
{
fstream file ;
file.open("BOOK.DAT", ios::in) ;

file.seekg(0,ios::beg) ;
int count=0 ;
while (file.read((char *) this, sizeof(BOOK)))
{
count++ ;
if (bookcode == tcode)
break ;
}
file.close() ;
return count ;
}
//**********************************************************
// THIS FUNCTION RETURNS THE AVAILABLE COPIES FOR THE GIVEN
// BOOK CODE.
//**********************************************************
int BOOK :: available(int tcode)
{
fstream file ;
file.open("BOOK.DAT", ios::in) ;
file.seekg(0,ios::beg) ;
int tavail=0 ;
while (file.read((char *) this, sizeof(BOOK)))
{
if (bookcode == tcode)
{
tavail = avail ;
break ;
}
}
file.close() ;
return tavail ;
}
//**********************************************************
// THIS FUNCTION RETURNS THE NO. OF COPIES FOR THE GIVEN
// BOOK CODE.
//**********************************************************
int BOOK :: no_of_copies(int tcode)
{
fstream file ;
file.open("BOOK.DAT", ios::in) ;
file.seekg(0,ios::beg) ;
int tcopies=0 ;

while (file.read((char *) this, sizeof(BOOK)))

{
if (bookcode == tcode)
{
tcopies = copies ;
break ;
}
}
file.close() ;
return tcopies ;
}
//**********************************************************
// THIS FUNCTION RETURNS THE BOOK NAME OF THE GIVEN BOOK
// CODE.
//**********************************************************
char *BOOK :: bookname(int tcode)
{
fstream file ;
file.open("BOOK.DAT", ios::in) ;
file.seekg(0,ios::beg) ;
char tname[33] ;
while (file.read((char *) this, sizeof(BOOK)))
{
if (bookcode == tcode)
{
strcpy(tname,name) ;
break ;
}
}
file.close() ;
return tname ;
}
//**********************************************************
// THIS FUNCTION RETURNS THE AUTHOR NAME OF THE GIVEN BOOK
// CODE.
//**********************************************************
char *BOOK :: authorname(int tcode)
{
fstream file ;
file.open("BOOK.DAT", ios::in) ;
file.seekg(0,ios::beg) ;
char tauthor[26] ;

while (file.read((char *) this, sizeof(BOOK)))

{
if (bookcode == tcode)
{
strcpy(tauthor,author) ;
break ;
}
}
file.close() ;
return tauthor ;
}
//**********************************************************
// THIS FUNCTION RETURNS THE BOOK PRICE OF THE GIVEN BOOK
// CODE.
//**********************************************************
float BOOK :: bookprice(int tcode)
{
fstream file ;
file.open("BOOK.DAT", ios::in) ;
file.seekg(0,ios::beg) ;
float tprice=0.0 ;
while (file.read((char *) this, sizeof(BOOK)))
{
if (bookcode == tcode)
{
tprice = price ;
break ;
}
}
file.close() ;
return tprice ;
}
//**********************************************************
// THIS FUNCTION RETURNS THE BOOK CODE OF THE GIVEN BOOK
// NAME.
//**********************************************************
int BOOK :: bookcodeof(char t1code[33])
{
fstream file ;
file.open("BOOK.DAT", ios::in) ;
file.seekg(0,ios::beg) ;
int tcode=0 ;

while (file.read((char *) this, sizeof(BOOK)))

{
if (!strcmpi(name,t1code))
{
tcode = bookcode ;
break ;
}
}
file.close() ;
return tcode ;
}
//**********************************************************
// THIS FUNCTION RETURNS THE NO. OF THE RECORDS IN THE BOOK
// FILE.
//**********************************************************
int BOOK :: reccount(void)
{
fstream file ;
file.open("BOOK.DAT", ios::in) ;
file.seekg(0,ios::beg) ;
int count=0 ;
while (file.read((char *) this, sizeof(BOOK)))
count++ ;
file.close() ;
return count ;
}
//**********************************************************
// THIS FUNCTION DELETES THE RECORD OF THE GIVEN BOOK CODE.
//**********************************************************
void BOOK :: delete_rec(int tcode)
{
fstream file ;
file.open("BOOK.DAT", ios::in) ;
fstream temp ;
temp.open("temp.dat", ios::out) ;
file.seekg(0,ios::beg) ;
while ( !file.eof() )
{
file.read((char *) this, sizeof(BOOK)) ;
if ( file.eof() )
break ;
if ( bookcode != tcode )

temp.write((char *) this, sizeof(BOOK)) ;

}
file.close() ;
temp.close() ;
file.open("BOOK.DAT", ios::out) ;
temp.open("temp.dat", ios::in) ;
temp.seekg(0,ios::beg) ;
while ( !temp.eof() )
{
temp.read((char *) this, sizeof(BOOK)) ;
if ( temp.eof() )
break ;
file.write((char *) this, sizeof(BOOK)) ;
}
file.close() ;
temp.close() ;
}
//**********************************************************
// THIS FUNCTION ADD THE RECORD IN THE BOOK FILE
//**********************************************************
void BOOK :: add_new_book(int tcode,chartname[33], char tauthor[26], float tprice, int
tcopies, int tavail)
{
fstream file ;
file.open("BOOK.DAT", ios::app) ;
bookcode = tcode ;
strcpy(name,tname) ;
strcpy(author,tauthor) ;
price = tprice ;
copies = tcopies ;
avail = tavail ;
file.write((char *) this, sizeof(BOOK)) ;
file.close() ;
}
//**********************************************************
// THIS FUNCTION UPDATE THE RECORD IN THE BOOK FILE FOR THE
// GIVEN BOOK CODE
//**********************************************************
void BOOK :: update_copies(int tcode, int tcopies, int tavail)
{
int recno ;
recno = recordno(tcode) ;

fstream file ;
file.open("BOOK.DAT", ios::out | ios::ate) ;
copies = tcopies ;
avail = tavail ;
int location ;
location = (recno-1) * sizeof(BOOK) ;
file.seekp(location) ;
file.write((char *) this, sizeof(BOOK)) ;
file.close() ;
}
//**********************************************************
// THIS FUNCTION MODIFY THE RECORD IN THE BOOK FILE FOR THE
// GIVEN BOOK CODE
//**********************************************************
void BOOK :: modify(int tcode, char tname[33], char tauthor[26], float tprice)
{
int recno ;
recno = recordno(tcode) ;
fstream file ;
file.open("BOOK.DAT", ios::out | ios::ate) ;
strcpy(name,tname) ;
strcpy(author,tauthor) ;
price = tprice ;
int location ;
location = (recno-1) * sizeof(BOOK) ;
file.seekp(location) ;
file.write((char *) this, sizeof(BOOK)) ;
file.close() ;
}
//**********************************************************
// THIS FUNCTION DISPLAY THE RECORD FROM THE BOOK FILE
// FOR THE GIVEN BOOK CODE
//**********************************************************
void BOOK :: display(int tcode)
{
fstream file ;
file.open("BOOK.DAT", ios::in) ;
file.seekg(0,ios::beg) ;
while (file.read((char *) this, sizeof(BOOK)))
{
if (bookcode == tcode)
{

gotoxy(5,5) ;
cout <<"Book Code : " <<bookcode ;
gotoxy(5,7) ;
cout <<"Book Name : " <<name ;
gotoxy(5,8) ;
cout <<"Author Name : " <<author ;
gotoxy(5,9) ;
cout <<"Price
: Rs." <<price ;
gotoxy(5,10) ;
cout <<"Copies
: " <<price ;
gotoxy(5,11) ;
cout <<"Available : " <<avail ;
break ;
}
}
file.close() ;
}
//**********************************************************
// THIS FUNCTION DISPLAY THE LIST OF BOOKS.
//**********************************************************
void BOOK :: list(void)
{
clrscr() ;
int row = 6 , found=0, flag=0 ;
char ch ;
gotoxy(33,2) ;
cout <<"LIST OF BOOKS" ;
gotoxy(32,3) ;
cout <<"~~~~~~~~~~~~~~~" ;
gotoxy(1,4) ;
cout <<"CODE BOOK NAME
AUTHOR
PRICE COPIES" ;
gotoxy(1,5) ;
cout
<<"~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~" ;
fstream file ;
file.open("BOOK.DAT", ios::in) ;
file.seekg(0,ios::beg) ;
while (file.read((char *) this, sizeof(BOOK)))
{
flag = 0 ;
delay(20) ;
found = 1 ;
gotoxy(2,row) ;

cout <<bookcode ;
gotoxy(7,row) ;
cout <<name ;
gotoxy(40,row) ;
cout <<author ;
gotoxy(66,row) ;
cout <<price ;
gotoxy(73,row) ;
cout <<copies ;
textbackground(WHITE) ; textcolor(BLACK) ;
gotoxy(40,row+1) ;
cprintf("STATUS: ") ;
textcolor(BLACK+BLINK) ;
cprintf("%d copies available",avail) ;
textbackground(BLACK) ; textcolor(LIGHTGRAY) ;
if ( row == 22 )
{
flag = 1 ;
row = 6 ;
gotoxy(1,25) ;
cout <<"Press any key to continue or Press <ESC> to exit" ;
ch = getch() ;
if (ch == 27)
break ;
clrscr() ;
gotoxy(33,2) ;
cout <<"LIST OF BOOKS" ;
gotoxy(32,3) ;
cout <<"~~~~~~~~~~~~~~~" ;
gotoxy(1,4) ;
cout <<"CODE BOOK NAME
AUTHOR
PRICE COPIES" ;
gotoxy(1,5) ;
cout
<<"~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~" ;
}
else
row = row + 2 ;
}
if (!found)
{
gotoxy(5,10) ;
cout <<"\7Records not found" ;
}
if (!flag)
{

gotoxy(1,25) ;
cout <<"Press any key to continue" ;
getche() ;
}
file.close () ;
}
//**********************************************************
// THIS FUNCTION RETURN 0 IF THE GIVEN MEMBER CODE NOT FOUND
//**********************************************************
int MEMBER :: member_found(int mcode)
{
fstream file ;
file.open("MEMBER.DAT", ios::in) ;
file.seekg(0,ios::beg) ;
int found=0 ;
while (file.read((char *) this, sizeof(MEMBER)))
{
if (memcode == mcode)
{
found = 1 ;
break ;
}
}
file.close() ;
return found ;
}
//**********************************************************
// THIS FUNCTION RETURN 0 IF THE MEMBER HAVE NOT ISSUED ANY
// BOOK.
//**********************************************************
int MEMBER :: issued(int mcode)
{
fstream file ;
file.open("MEMBER.DAT", ios::in) ;
file.seekg(0,ios::beg) ;
int missue=0 ;
while (file.read((char *) this, sizeof(MEMBER)))
{
if (memcode == mcode)
{
missue = bookcode ;
break ;

}
}
file.close() ;
return missue ;
}
//**********************************************************
// THIS FUNCTION CALCULATE AND RETURN FINE FOR THE GIVEN
// MEMBER CODE.
//**********************************************************
int MEMBER :: fine(int mcode)
{
DATE D ;
int d1, m1, y1 ;
struct date d;
getdate(&d);
d1 = d.da_day ;
m1 = d.da_mon ;
y1 = d.da_year ;
fstream file ;
file.open("MEMBER.DAT", ios::in) ;
file.seekg(0,ios::beg) ;
int days, t_fine ;
while (file.read((char *) this, sizeof(MEMBER)))
{
if (memcode == mcode)
{
days = D.diff(dd,mm,yy,d1,m1,y1) ;
t_fine = days * 2 ;
break ;
}
}
file.close() ;
return t_fine ;
}
//**********************************************************
// THIS FUNCTION RETURN THE LAST CODE OF THE MEMBER FILE.
//**********************************************************
int MEMBER :: lastcode(void)
{
fstream file ;
file.open("MEMBER.DAT", ios::in) ;
file.seekg(0,ios::beg) ;

int mcode=0 ;
while (file.read((char *) this, sizeof(MEMBER)))
mcode = memcode ;
file.close() ;
return mcode ;
}
//**********************************************************
// THIS FUNCTION RETURNS MEMBER NAME OF THE GIVEN MEMBER
// CODE.
//**********************************************************
char *MEMBER :: membername(int mcode)
{
fstream file ;
file.open("MEMBER.DAT", ios::in) ;
file.seekg(0,ios::beg) ;
char mname[26] ;
while (file.read((char *) this, sizeof(MEMBER)))
{
if (memcode == mcode)
{
strcpy(mname,name) ;
break ;
}
}
file.close() ;
return mname ;
}
//**********************************************************
// THIS FUNCTION RETURNS MEMBER PHONE OF THE GIVEN MEMBER
// CODE.
//**********************************************************
char *MEMBER :: memberphone(int mcode)
{
fstream file ;
file.open("MEMBER.DAT", ios::in) ;
file.seekg(0,ios::beg) ;
char mphone[10] ;
while (file.read((char *) this, sizeof(MEMBER)))
{
if (memcode == mcode)
{
strcpy(mphone,phone) ;

break ;
}
}
file.close() ;
return mphone ;
}
//**********************************************************
// THIS FUNCTION RETURNS MEMBER ADDRESS OF THE GIVEN MEMBER
// CODE.
//**********************************************************
char *MEMBER :: memberaddress(int mcode)
{
fstream file ;
file.open("MEMBER.DAT", ios::in) ;
file.seekg(0,ios::beg) ;
char maddress[33] ;
while (file.read((char *) this, sizeof(MEMBER)))
{
if (memcode == mcode)
{
strcpy(maddress,address) ;
break ;
}
}
file.close() ;
return maddress ;
}
//**********************************************************
// THIS FUNCTION RETURNS RECORD NO. OF THE GIVEN MEMBER
// CODE.
//**********************************************************
int MEMBER :: recordno(int mcode)
{
fstream file ;
file.open("MEMBER.DAT", ios::in) ;
file.seekg(0,ios::beg) ;
int count=0 ;
while (file.read((char *) this, sizeof(MEMBER)))
{
count++ ;
if (memcode == mcode)
break ;

}
file.close() ;
return count ;
}
//**********************************************************
// THIS FUNCTION DELETE RECORD FOR THE GIVEN MEMBER CODE.
//**********************************************************
void MEMBER :: delete_rec(int mcode)
{
fstream file ;
file.open("MEMBER.DAT", ios::in) ;
fstream temp ;
temp.open("temp.dat", ios::out) ;
file.seekg(0,ios::beg) ;
while ( !file.eof() )
{
file.read((char *) this, sizeof(MEMBER)) ;
if ( file.eof() )
break ;
if ( memcode != mcode )
temp.write((char *) this, sizeof(MEMBER)) ;
}
file.close() ;
temp.close() ;
file.open("MEMBER.DAT", ios::out) ;
temp.open("temp.dat", ios::in) ;
temp.seekg(0,ios::beg) ;
while ( !temp.eof() )
{
temp.read((char *) this, sizeof(MEMBER)) ;
if ( temp.eof() )
break ;
file.write((char *) this, sizeof(MEMBER)) ;
}
file.close() ;
temp.close() ;
}
//**********************************************************
// THIS FUNCTION UPDATE RECORD FOR THE GIVEN MEMBER CODE.
//**********************************************************
void MEMBER :: update_book(int mcode, int tcode, int d1, int m1, int y1)
{

fstream file ;
file.open("MEMBER.DAT", ios::in) ;
fstream temp ;
temp.open("temp.dat", ios::out) ;
file.seekg(0,ios::beg) ;
while ( !file.eof() )
{
file.read((char *) this, sizeof(MEMBER)) ;
if ( file.eof() )
break ;
if ( memcode == mcode )
{
bookcode = tcode ;
dd = d1 ;
mm = m1 ;
yy = y1 ;
temp.write((char *) this, sizeof(MEMBER)) ;
}
else
temp.write((char *) this, sizeof(MEMBER)) ;
}
file.close() ;
temp.close() ;
file.open("MEMBER.DAT", ios::out) ;
temp.open("temp.dat", ios::in) ;
temp.seekg(0,ios::beg) ;
while ( !temp.eof() )
{
temp.read((char *) this, sizeof(MEMBER)) ;
if ( temp.eof() )
break ;
file.write((char *) this, sizeof(MEMBER)) ;
}
file.close() ;
temp.close() ;
}
//**********************************************************
// THIS FUNCTION MODIFY RECORD FOR THE GIVEN MEMBER CODE.
//**********************************************************
void MEMBER :: modify(int mcode, char mname[26], char mphone[10], char
maddress[33])
{
int recno ;
recno = recordno(mcode) ;

fstream file ;
file.open("MEMBER.DAT", ios::out | ios::ate) ;
strcpy(name,mname) ;
strcpy(phone,mphone) ;
strcpy(address,maddress) ;
int location ;
location = (recno-1) * sizeof(MEMBER) ;
file.seekp(location) ;
file.write((char *) this, sizeof(MEMBER)) ;
file.close() ;
}
//**********************************************************
// THIS FUNCTION ADD RECORD IN THE FILE FOR THE GIVEN
// MEMBER CODE.
//**********************************************************
void MEMBER :: add_mem(int mcode, int bcode, char mname[26], char maddress[33],
char mphone[10], int d1, int m1, int y1)
{
fstream file ;
file.open("MEMBER.DAT", ios::app) ;
memcode = mcode ;
bookcode = bcode ;
strcpy(name,mname) ;
strcpy(address,maddress) ;
strcpy(phone,mphone) ;
dd = d1 ;
mm = m1 ;
yy = y1 ;
file.write((char *) this, sizeof(MEMBER)) ;
file.close() ;
}
//**********************************************************
// THIS FUNCTION DISPLAY THE RECORD FOR THE GIVEN MEMBER
// CODE.
//**********************************************************
void MEMBER :: display(int mcode)
{
fstream file ;
file.open("MEMBER.DAT", ios::in) ;
file.seekg(0,ios::beg) ;
while (file.read((char *) this, sizeof(MEMBER)))
{

if (memcode == mcode)
{
gotoxy(5,3) ;
cout <<"Member Code # " <<mcode ;
gotoxy(5,4) ;
cout <<"~~~~~~~~~~~~~~~~~" ;
gotoxy(5,6) ;
cout <<"Name : " <<name ;
gotoxy(5,7) ;
cout <<"Phone : " <<phone ;
gotoxy(5,8) ;
cout <<"Address : " <<address ;
break ;
}
}
file.close() ;
}
//**********************************************************
// THIS FUNCTION DISPLAY THE LIST OF THE MEMBERS
//**********************************************************
void MEMBER :: list(void)
{
clrscr() ;
BOOK B ;
int row = 6 , found=0, flag=0 ;
char ch ;
gotoxy(32,2) ;
cout <<"LIST OF MEMBERS" ;
gotoxy(31,3) ;
cout <<"~~~~~~~~~~~~~~~~~" ;
gotoxy(1,4) ;
cout <<"CODE BOOK CODE NAME
PHONE
ADDRESS" ;
gotoxy(1,5) ;
cout
<<"~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~" ;
fstream file ;
file.open("MEMBER.DAT", ios::in) ;
file.seekg(0,ios::beg) ;
while (file.read((char *) this, sizeof(MEMBER)))
{
flag = 0 ;
delay(20) ;
found = 1 ;

gotoxy(2,row) ;
cout <<memcode ;
gotoxy(10,row) ;
cout <<bookcode ;
gotoxy(19,row) ;
cout <<name ;
gotoxy(38,row) ;
cout <<phone ;
gotoxy(50,row);
cout<<address;
textbackground(WHITE) ; textcolor(BLACK) ;
gotoxy(7,row+1) ;
if (bookcode == 0)
cprintf("BOOK NAME: (Not Issued)") ;
else
{
cprintf("BOOK NAME: %s",B.bookname(bookcode)) ;
gotoxy(42,row+1) ;
cprintf("Date of return: ") ;
textcolor(BLACK+BLINK) ;
cprintf("%d/%d/%d",dd,mm,yy) ;
}
textbackground(BLACK) ; textcolor(LIGHTGRAY) ;
if ( row == 22 )
{
flag = 1 ;
row = 6 ;
gotoxy(1,25) ;
cout <<"Press any key to continue or Press <ESC> to exit" ;
ch = getch() ;
if (ch == 27)
break ;
clrscr() ;
gotoxy(32,2) ;
cout <<"LIST OF MEMBERS" ;
gotoxy(31,3) ;
cout <<"~~~~~~~~~~~~~~~~~" ;
gotoxy(1,4) ;
cout <<"CODE BOOK CODE NAME
PHONE" ;
gotoxy(1,5) ;
cout
<<"~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~" ;
}
else
row = row + 2 ;

}
if (!found)
{
gotoxy(5,10) ;
cout <<"\7Records not found" ;
}
if (!flag)
{
gotoxy(1,25) ;
cout <<"Press any key to continue" ;
getche() ;
}
file.close () ;
}
//**********************************************************
// THIS FUNCTION GIVES DATA TO ADD RECORD IN THE BOOK FILE.
//**********************************************************
void WORKING :: add_book(void)
{
if (!reccount()) // MEMBER FUNCTION OF BOOK
{
add_new_book(0,"null","null",0.0,0,0) ;
BOOK::delete_rec(0) ;
}
char ch ;
int tcode, tcopies, tavail ;
char tname[33], tauthor[26] ;
float tprice=0.0 ;
do
{
int found=0, valid=0 ;
int tc ;
float t2=0.0 ;
char t[10], t1[10] ;
clrscr() ;
gotoxy(29,3) ;
cout <<"ADDITION OF THE BOOKS" ;
gotoxy(29,4) ;
cout <<"~~~~~~~~~~~~~~~~~~~~~" ;
gotoxy(72,1) ;
cout <<"<0>=Exit" ;
gotoxy(5,25) ;
cout <<"Enter code no. of the book" ;
gotoxy(5,5) ;

cout <<"Code no. " ;

gets(t) ;
tc = atoi(t) ;
tcode = tc ;
if (tcode == 0)
return ;
if (book_found(tcode))
{
found = 1 ;
gotoxy(19,8) ;
cout <<bookname(tcode) ;
gotoxy(19,9) ;
cout <<authorname(tcode) ;
gotoxy(22,10) ;
cout <<bookprice(tcode) ;
}
gotoxy(5,8) ;
cout <<"Book Name : " ;
gotoxy(5,9) ;
cout <<"Author Name : " ;
gotoxy(5,10) ;
cout <<"Price
: Rs." ;
gotoxy(5,12) ;
cout <<"Copies
:";
valid = 0 ;
while (!valid && !found)
{
valid = 1 ;
gotoxy(5,25) ; clreol() ;
cout <<"Enter the name of the book" ;
gotoxy(19,8) ; clreol() ;
gets(tname) ;
strupr(tname) ;
if (tname[0] == '0')
return ;
if (strlen(tname) < 1 || strlen(tname) > 32)
{
valid = 0 ;
gotoxy(5,25) ; clreol() ;
cout <<"\7Enter correctly (Range: 1..32)" ;
getch() ;
}
}
valid = 0 ;
while (!valid && !found)
{

valid = 1 ;
gotoxy(5,25) ; clreol() ;
cout <<"Enter the authors name of the book" ;
gotoxy(19,9) ; clreol() ;
gets(tauthor) ;
strupr(tauthor) ;
if (tauthor[0] == '0')
return ;
if (strlen(tauthor) < 1 || strlen(tauthor) > 25)
{
valid = 0 ;
gotoxy(5,25) ; clreol() ;
cout <<"\7Enter correctly (Range: 1..25)" ;
getch() ;
}
}
valid = 0 ;
while (!valid && !found)
{
valid = 1 ;
gotoxy(5,25) ; clreol() ;
cout <<"Enter the price of the book" ;
gotoxy(22,10) ; clreol() ;
gets(t1) ;
t2 = atof(t1) ;
tprice = t2 ;
if (t1[0] == '0')
return ;
if (tprice< 1 || tprice> 9999)
{
valid = 0 ;
gotoxy(5,25) ; clreol() ;
cout <<"\7Enter correctly" ;
getch() ;
}
}
valid = 0 ;
while (!valid)
{
valid = 1 ;
gotoxy(5,25) ; clreol() ;
cout <<"Enter no. of copies of book to be added" ;
gotoxy(19,12) ; clreol() ;
gets(t) ;
tc = atoi(t) ;
tcopies = tc ;

if (t[0] == '0')
return ;
if (tcopies< 1 || tcopies> 50)
{
valid = 0 ;
gotoxy(5,25) ; clreol() ;
cout <<"\7Enter correctly" ;
getch() ;
}
}
tavail = available(tcode) + tcopies ;
tcopies = no_of_copies(tcode) + tcopies ;
gotoxy(5,25) ; clreol() ;
do
{
gotoxy(5,15) ; clreol() ;
cout <<"Do you want to save (y/n) : " ;
ch = getche() ;
ch = toupper(ch) ;
} while (ch != 'Y' && ch != 'N') ;
if (ch == 'Y')
{
if (found)
update_copies(tcode,tcopies,tavail) ;
else
add_new_book(tcode,tname,tauthor,tprice,tcopies,tavail) ;
}
do
{
gotoxy(5,17) ; clreol() ;
cout <<"Do you want to add more (y/n) : " ;
ch = getche() ;
ch = toupper(ch) ;
} while (ch != 'Y' && ch != 'N') ;
} while (ch == 'Y') ;
}
//**********************************************************
// THIS FUNCTION GIVES DATA TO ADD RECORD IN THE MEMBER FILE
//**********************************************************
void WORKING :: add_member(void)
{
char ch ;
int mcode, bcode ;

char mname[26], mphone[10], maddress[33] ;

int d1, m1, y1 ;
mcode = lastcode() ;
mcode++ ;
do
{
int valid=0 ;
clrscr() ;
gotoxy(28,3) ;
cout <<"ADDITION OF THE MEMBERS" ;
gotoxy(28,4) ;
cout <<"~~~~~~~~~~~~~~~~~~~~~~~" ;
gotoxy(72,1) ;
cout <<"<0>=Exit" ;
gotoxy(5,7) ;
cout <<"Member Code # " <<mcode ;
gotoxy(5,8) ;
cout <<"~~~~~~~~~~~~~~~~~" ;
gotoxy(5,10) ;
cout <<"Name : " ;
gotoxy(5,12) ;
cout <<"Phone : " ;
gotoxy(5,14) ;
cout <<"Address : " ;
do
{
valid = 1 ;
gotoxy(5,25) ; clreol() ;
cout <<"Enter the name of the New Member" ;
gotoxy(15,10) ; clreol() ;
gets(mname) ;
strupr(mname) ;
if (mname[0] == '0')
return ;
if (strlen(mname) < 1 || strlen(mname) > 25)
{
valid = 0 ;
gotoxy(5,25) ; clreol() ;
cout <<"\7Enter correctly (Range: 1..25)" ;
getch() ;
}
} while (!valid) ;
do
{
valid = 1 ;
gotoxy(5,25) ; clreol() ;

cout <<"Enter Phone no. of the Member or Press <ENTER> for none" ;
gotoxy(15,12) ; clreol() ;
gets(mphone) ;
if (mphone[0] == '0')
return ;
if ((strlen(mphone) < 7 &&strlen(mphone) > 0) || (strlen(mphone) > 9))
{
valid = 0 ;
gotoxy(5,25) ; clreol() ;
cout <<"\7Enter correctly" ;
getch() ;
}
} while (!valid) ;
if (strlen(mphone) == 0)
strcpy(mphone,"-") ;
do
{
valid = 1 ;
gotoxy(5,25) ; clreol() ;
cout <<"Enter the address of the New Member" ;
gotoxy(15,14) ; clreol() ;
gets(maddress) ;
strupr(maddress) ;
if (maddress[0] == '0')
return ;
if (strlen(maddress) < 1 || strlen(maddress) > 32)
{
valid = 0 ;
gotoxy(5,25) ; clreol() ;
cout <<"\7Enter correctly (Range: 1..32)" ;
getch() ;
}
} while (!valid) ;
gotoxy(5,25) ; clreol() ;
do
{
gotoxy(5,17) ; clreol() ;
cout <<"Do you want to save (y/n) : " ;
ch = getche() ;
ch = toupper(ch) ;
if (ch == '0')
return ;
} while (ch != 'Y' && ch != 'N') ;
if (ch == 'Y')
{
bcode = 0 ;

d1 = 0 ;
m1 = 0 ;
y1 = 0 ;
add_mem(mcode,bcode,mname,maddress,mphone,d1,m1,y1) ;
mcode++ ;
}
do
{
gotoxy(5,19) ; clreol() ;
cout <<"Do you want to add more (y/n) : " ;
ch = getche() ;
ch = toupper(ch) ;
if (ch == '0')
return ;
} while (ch != 'Y' && ch != 'N') ;
} while (ch == 'Y') ;
}
//**********************************************************
// THIS FUNCTION ISSUES THE BOOK
//**********************************************************
void WORKING :: issuebook(void)
{
BOOK B ;
MEMBER M ;
DATE D ;
char t1code[33], ch ;
int t2code=0, tcode=0, mcode=0 ;
int valid ;
int d1, m1, y1 ;
struct date d;
getdate(&d);
d1 = d.da_day ;
m1 = d.da_mon ;
y1 = d.da_year ;
do
{
valid = 1 ;
while (1)
{
clrscr() ;
gotoxy(5,2) ;
cout <<"Date : " <<d1 <<"/" <<m1 <<"/" <<y1 ;
gotoxy(72,1) ;
cout <<"<0>=Exit" ;

gotoxy(5,5) ;
cout <<"Enter Code or Name of the Book to be issued" ;
gotoxy(5,6) ;
cout <<"
or
";
gotoxy(5,7) ;
cout <<"Press <ENTER> for help " ;
gets(t1code) ;
if (t1code[0] == '0')
return ;
if (strlen(t1code) == 0)
B.list() ;
else
break ;
}
t2code = atoi(t1code) ;
tcode = t2code ;
if ((tcode == 0 && !bookname_found(t1code)) || (tcode != 0 && !book_found(tcode)))
{
valid = 0 ;
gotoxy(5,10) ;
cout <<"\7Record not found" ;
gotoxy(5,11) ;
cout <<"Press <ESC> to exit or any other key to continue" ;
ch = getch() ;
if (ch == 27)
return ;
}
} while (!valid) ;
if (tcode == 0)
tcode = bookcodeof(t1code) ;
if (!available(tcode))
{
gotoxy(5,10) ;
cout <<"\7Sorry! Book (" <<bookname(tcode) <<") is not available" ;
gotoxy(5,11) ;
cout <<"Kindly issue any other Book" ;
gotoxy(5,12) ;
cout <<"See List of Books" ;
getch() ;
return ;
}
do
{
valid = 1 ;
while (1)
{

clrscr() ;
gotoxy(72,1) ;
cout <<"<0>=Exit" ;
gotoxy(5,2) ;
cout <<"Date : " <<d1 <<"/" <<m1 <<"/" <<y1 ;
gotoxy(5,5) ;
cout <<"Book Name: " <<bookname(tcode) ;
gotoxy(5,7) ;
cout <<"Enter Code no. of the Member" ;
gotoxy(5,8) ;
cout <<"
or
";
gotoxy(5,9) ;
cout <<"Press <ENTER> for help " ;
gets(t1code) ;
if (t1code[0] == '0')
return ;
if (strlen(t1code) == 0)
M.list() ;
else
break ;
}
t2code = atoi(t1code) ;
mcode = t2code ;
if (mcode == 0)
{
valid = 0 ;
gotoxy(5,25) ;
cout <<"\7Enter Correctly" ;
getch() ;
}
if (!member_found(mcode) && valid)
{
valid = 0 ;
gotoxy(5,13) ;
cout <<"\7Record not found" ;
gotoxy(5,14) ;
cout <<"Press <ESC> to exit or any other key to continue" ;
ch = getch() ;
if (ch == 27)
return ;
}
} while (!valid) ;
int tcopies, tavail ;
tcopies = no_of_copies(tcode) ; // member function of BOOK
tavail = available(tcode)< 1 ; // member function of BOOK
update_copies(tcode,tcopies,tavail) ; // member function of BOOK

D.extend_date(d1,m1,y1,15) ;
d1 = D.day ;
m1 = D.mon ;
y1 = D.year ;
update_book(mcode,tcode,d1,m1,y1) ; // member function of MEMBER
gotoxy(5,13) ;
cout <<"\7Book is issued to " <<membername(mcode) ;
gotoxy(5,15) ;
cout <<"Date of Return : " <<d1 <<"/" <<m1 <<"/" <<y1 ;
getch() ;
}
//**********************************************************
// THIS FUNCTION RETURNS THE BOOK FOR THE MEMBER
//**********************************************************
void WORKING :: returnbook(void)
{
MEMBER M ;
char t1code[5], ch ;
int t2code=0, mcode=0, valid ;
int d1, m1, y1 ;
struct date d;
getdate(&d);
d1 = d.da_day ;
m1 = d.da_mon ;
y1 = d.da_year ;
do
{
valid = 1 ;
while (1)
{
clrscr() ;
gotoxy(72,1) ;
cout <<"<0>=Exit" ;
gotoxy(5,2) ;
cout <<"Date : " <<d1 <<"/" <<m1 <<"/" <<y1 ;
gotoxy(5,7) ;
cout <<"Enter Code no. of the Member who wants to return book" ;
gotoxy(5,8) ;
cout <<"
or
";
gotoxy(5,9) ;
cout <<"Press <ENTER> for help " ;
gets(t1code) ;
if (t1code[0] == '0')
return ;

if (strlen(t1code) == 0)
M.list() ;
else
break ;
}
t2code = atoi(t1code) ;
mcode = t2code ;
if (mcode == 0)
{
valid = 0 ;
gotoxy(5,25) ;
cout <<"\7Enter Correctly" ;
getch() ;
}
if (!member_found(mcode) && valid)
{
valid = 0 ;
gotoxy(5,13) ;
cout <<"\7Record not found" ;
gotoxy(5,14) ;
cout <<"Press <ESC> to exit or any other key to continue" ;
ch = getch() ;
if (ch == 27)
return ;
}
if (!issued(mcode) && valid)
{
valid = 0 ;
gotoxy(5,13) ;
cout <<"\7Member have no book to return" ;
gotoxy(5,14) ;
cout <<"Press <ESC> to exit or any other key to continue" ;
ch = getch() ;
if (ch == 27)
return ;
}
} while (!valid) ;
int bcode, tcopies, tavail ;
bcode = issued(mcode) ;
gotoxy(5,13) ;
cout <<"Book Code : " <<bcode ;
gotoxy(5,14) ;
cout <<"Book Name : " <<bookname(bcode) ;
tcopies = no_of_copies(bcode) ;
tavail = available(bcode) + 1 ;
int f ;

f = fine(mcode) ;
if (f != 0)
{
gotoxy(5,16) ;
cout <<"You have to pay a fine of Rs." <<f ;
gotoxy(5,17) ;
cout <<"Please do not delay the Return of Book again" ;
}
update_copies(bcode,tcopies,tavail) ;
update_book(mcode,0,0,0,0) ;
gotoxy(5,19) ;
cout <<"\7Book has been returned" ;
getch() ;
}
//**********************************************************
// THIS FUNCTION GIVES DATA TO MODIFY THE BOOK RECORD
//**********************************************************
void WORKING :: modify_book(void)
{
BOOK B ;
char t1code[5], tname[33], tauthor[26], *t1, ch ;
int t2code=0, tcode=0 ;
float t2=0.0, tprice=0.0 ;
int valid ;
do
{
valid = 1 ;
while (1)
{
clrscr() ;
gotoxy(72,1) ;
cout <<"<0>=Exit" ;
gotoxy(5,5) ;
cout <<"Enter Code or Name of the Book to be modified" ;
gotoxy(5,6) ;
cout <<"
or
";
gotoxy(5,7) ;
cout <<"Press <ENTER> for help " ;
gets(t1code) ;
if (t1code[0] == '0')
return ;
if (strlen(t1code) == 0)
B.list() ;
else

break ;
}
t2code = atoi(t1code) ;
tcode = t2code ;
if ((tcode == 0 && !bookname_found(t1code)) || (tcode != 0 && !book_found(tcode)))
{
valid = 0 ;
gotoxy(5,10) ;
cout <<"\7Record not found" ;
gotoxy(5,11) ;
cout <<"Press <ESC> to exit or any other key to continue" ;
ch = getch() ;
if (ch == 27)
return ;
}
} while (!valid) ;
if (tcode == 0)
tcode = bookcodeof(t1code) ;
clrscr() ;
gotoxy(72,1) ;
cout <<"<0>=Exit" ;
BOOK::display(tcode) ;
do
{
gotoxy(5,13) ; clreol() ;
cout <<"Do you want to modify this record (y/n) : " ;
ch = getche() ;
ch = toupper(ch) ;
if (ch == '0')
return ;
} while (ch != 'Y' && ch != 'N') ;
if (ch == 'N')
return ;
gotoxy(5,16) ;
cout <<"Book Name : " ;
gotoxy(5,17) ;
cout <<"Author Name : " ;
gotoxy(5,18) ;
cout <<"Price
: Rs." ;
do
{
valid = 1 ;
gotoxy(5,25) ; clreol() ;
cout <<"Enter the name of the book or <ENTER> for no change" ;
gotoxy(19,16) ; clreol() ;
gets(tname) ;

strupr(tname) ;
if (tname[0] == '0')
return ;
if (strlen(tname) > 32)
{
valid = 0 ;
gotoxy(5,25) ; clreol() ;
cout <<"\7Enter correctly (Range: 1..32)" ;
getch() ;
}
} while (!valid) ;
if (strlen(tname) == 0)
strcpy(tname,bookname(tcode)) ;
do
{
valid = 1 ;
gotoxy(5,25) ; clreol() ;
cout <<"Enter the authors name or <ENTER> for no change" ;
gotoxy(19,17) ; clreol() ;
gets(tauthor) ;
strupr(tauthor) ;
if (tauthor[0] == '0')
return ;
if (strlen(tauthor) > 25)
{
valid = 0 ;
gotoxy(5,25) ; clreol() ;
cout <<"\7Enter correctly (Range: 1..25)" ;
getch() ;
}
} while (!valid) ;
if (strlen(tauthor) == 0)
strcpy(tauthor,authorname(tcode)) ;
do
{
valid = 1 ;
gotoxy(5,25) ; clreol() ;
cout <<"Enter price or <ENTER> for no change" ;
gotoxy(22,18) ; clreol() ;
gets(t1) ;
t2 = atof(t1) ;
tprice = t2 ;
if (t1[0] == '0')
return ;
if (strlen(t1) == 0)
break ;

if (tprice< 1 || tprice> 9999)

{
valid = 0 ;
gotoxy(5,25) ; clreol() ;
cout <<"\7Enter correctly" ;
getch() ;
}
} while (!valid) ;
if (strlen(t1) == 0)
tprice = bookprice(tcode) ;
gotoxy(5,25) ; clreol() ;
do
{
gotoxy(5,20) ; clreol() ;
cout <<"Do you want to save changes (y/n) : " ;
ch = getche() ;
ch = toupper(ch) ;
if (ch == '0')
return ;
} while (ch != 'Y' && ch != 'N') ;
if (ch == 'N')
return ;
BOOK::modify(tcode,tname,tauthor,tprice) ;
gotoxy(5,23) ;
cout <<"\7Record Modified" ;
getch() ;
}
//**********************************************************
// THIS FUNCTION GIVES DATA TO MODIFY THE MEMBER RECORD
//**********************************************************
void WORKING :: modify_member(void)
{
MEMBER M ;
char m1code[10], mname[26], mphone[10], maddress[33], ch ;
int m2code=0, mcode=0 ;
int valid ;
do
{
valid = 1 ;
while (1)
{
clrscr() ;
gotoxy(72,1) ;
cout <<"<0>=Exit" ;

gotoxy(5,7) ;
cout <<"Enter Code no. of the Member to be Modify" ;
gotoxy(5,8) ;
cout <<"
or
";
gotoxy(5,9) ;
cout <<"Press <ENTER> for help " ;
gets(m1code) ;
m2code = atoi(m1code) ;
mcode = m2code ;
if (m1code[0] == '0')
return ;
if (strlen(m1code) == 0)
M.list() ;
else
break ;
}
if (mcode == 0)
{
valid = 0 ;
gotoxy(5,25) ;
cout <<"\7Enter Correctly" ;
getch() ;
}
if (valid && !member_found(mcode))
{
valid = 0 ;
gotoxy(5,13) ;
cout <<"\7Record not found" ;
gotoxy(5,14) ;
cout <<"Press <ESC> to exit or any other key to continue" ;
ch = getch() ;
if (ch == 27)
return ;
}
} while (!valid) ;
clrscr() ;
gotoxy(72,1) ;
cout <<"<0>=Exit" ;
MEMBER::display(mcode) ;
do
{
gotoxy(5,10) ; clreol() ;
cout <<"Do you want to modify this record (y/n) : " ;
ch = getche() ;
ch = toupper(ch) ;
if (ch == '0')

return ;
} while (ch != 'Y' && ch != 'N') ;
if (ch == 'N')
return ;
gotoxy(5,13) ;
cout <<"Name : " ;
gotoxy(5,14) ;
cout <<"Phone : " ;
gotoxy(5,15) ;
cout <<"Address : " ;
do
{
valid = 1 ;
gotoxy(5,25) ; clreol() ;
cout <<"Enter the name of the member or <ENTER> for no change" ;
gotoxy(19,13) ; clreol() ;
gets(mname) ;
strupr(mname) ;
if (mname[0] == '0')
return ;
if (strlen(mname) > 25)
{
valid = 0 ;
gotoxy(5,25) ; clreol() ;
cout <<"\7Enter correctly (Range: 1..25)" ;
getch() ;
}
} while (!valid) ;
if (strlen(mname) == 0)
strcpy(mname,membername(mcode)) ;
do
{
valid = 1 ;
gotoxy(5,25) ; clreol() ;
cout <<"Enter the Phone no. of Member or <ENTER> for no change" ;
gotoxy(19,14) ; clreol() ;
gets(mphone) ;
if (mphone[0] == '0')
return ;
if ((strlen(mphone) < 7 &&strlen(mphone) > 0) || (strlen(mphone) > 9))
{
valid = 0 ;
gotoxy(5,25) ; clreol() ;
cout <<"\7Enter correctly" ;
getch() ;
}

} while (!valid) ;
if (strlen(mphone) == 0)
strcpy(mphone,memberphone(mcode)) ;
do
{
valid = 1 ;
gotoxy(5,25) ; clreol() ;
cout <<"Enter the address of the member or <ENTER> for no change" ;
gotoxy(19,15) ; clreol() ;
gets(maddress) ;
strupr(maddress) ;
if (maddress[0] == '0')
return ;
if (strlen(maddress) > 32)
{
valid = 0 ;
gotoxy(5,25) ; clreol() ;
cout <<"\7Enter correctly (Range: 1..32)" ;
getch() ;
}
} while (!valid) ;
if (strlen(maddress) == 0)
strcpy(maddress,memberaddress(mcode)) ;
gotoxy(5,25) ; clreol() ;
do
{
gotoxy(5,18) ; clreol() ;
cout <<"Do you want to save changes (y/n) : " ;
ch = getche() ;
ch = toupper(ch) ;
if (ch == '0')
return ;
} while (ch != 'Y' && ch != 'N') ;
if (ch == 'N')
return ;
MEMBER::modify(mcode,mname,mphone,maddress) ;
gotoxy(5,23) ;
cout <<"\7Record Modified" ;
getch() ;
}
//**********************************************************
// THIS FUNCTION GIVES BOOK CODE TO DELETE THE BOOK RECORD
//**********************************************************
void WORKING :: delete_book(void)

{
BOOK B ;
char t1code[5], tname[33], tauthor[26], ch ;
int t2code=0, tcode=0 ;
int valid ;
do
{
valid = 1 ;
while (1)
{
clrscr() ;
gotoxy(72,1) ;
cout <<"<0>=Exit" ;
gotoxy(5,5) ;
cout <<"Enter Code or Name of the Book to be Deleted" ;
gotoxy(5,6) ;
cout <<"
or
";
gotoxy(5,7) ;
cout <<"Press <ENTER> for help " ;
gets(t1code) ;
if (t1code[0] == '0')
return ;
if (strlen(t1code) == 0)
B.list() ;
else
break ;
}
t2code = atoi(t1code) ;
tcode = t2code ;
if ((tcode == 0 && !bookname_found(t1code)) || (tcode != 0 && !book_found(tcode)))
{
valid = 0 ;
gotoxy(5,10) ;
cout <<"\7Record not found" ;
gotoxy(5,11) ;
cout <<"Press <ESC> to exit or any other key to continue" ;
ch = getch() ;
if (ch == 27)
return ;
}
} while (!valid) ;
if (tcode == 0)
tcode = bookcodeof(t1code) ;
clrscr() ;
gotoxy(72,1) ;
cout <<"<0>=Exit" ;

BOOK::display(tcode) ;
do
{
gotoxy(5,13) ; clreol() ;
cout <<"Do you want to delete this record (y/n) : " ;
ch = getche() ;
ch = toupper(ch) ;
if (ch == '0')
return ;
} while (ch != 'Y' && ch != 'N') ;
if (ch == 'N')
return ;
int tavail, tcopies ;
tavail = available(tcode) ;
tcopies = no_of_copies(tcode) ;
if (tavail != tcopies)
{
gotoxy(5,15) ;
cout <<"\7Record cannot be deleted. This book is issued." ;
getch() ;
return ;
}
BOOK::delete_rec(tcode) ;
gotoxy(5,23) ;
cout <<"\7Record Deleted" ;
getch() ;
}
//**********************************************************
// THIS FUNCTION GIVES MEMBER CODE TO DELETE THE MEMBER
// RECORD
//**********************************************************
void WORKING :: delete_member(void)
{
MEMBER M ;
char m1code[5], mname[26], mphone[10], maddress[33], ch ;
int m2code=0, mcode=0 ;
int valid ;
do
{
valid = 1 ;
while (1)
{
clrscr() ;
gotoxy(72,1) ;

cout <<"<0>=Exit" ;
gotoxy(5,7) ;
cout <<"Enter Code no. of the Member to be Deleted" ;
gotoxy(5,8) ;
cout <<"
or
";
gotoxy(5,9) ;
cout <<"Press <ENTER> for help " ;
gets(m1code) ;
m2code = atoi(m1code) ;
mcode = m2code ;
if (m1code[0] == '0')
return ;
if (strlen(m1code) == 0)
M.list() ;
else
break ;
}
if (mcode == 0)
{
valid = 0 ;
gotoxy(5,25) ;
cout <<"\7Enter Correctly" ;
getch() ;
}
if (valid && !member_found(mcode))
{
valid = 0 ;
gotoxy(5,13) ;
cout <<"\7Record not found" ;
gotoxy(5,14) ;
cout <<"Press <ESC> to exit or any other key to continue" ;
ch = getch() ;
if (ch == 27)
return ;
}
} while (!valid) ;
clrscr() ;
gotoxy(72,1) ;
cout <<"<0>=Exit" ;
MEMBER::display(mcode) ;
do
{
gotoxy(5,10) ; clreol() ;
cout <<"Do you want to Delete this record (y/n) : " ;
ch = getche() ;
ch = toupper(ch) ;

if (ch == '0')
return ;
} while (ch != 'Y' && ch != 'N') ;
if (ch == 'N')
return ;
if (issued(mcode))
{
gotoxy(5,15) ;
cout <<"\7Record cannot be delete. Member has a book" ;
getch() ;
return ;
}
MEMBER::delete_rec(mcode) ;
gotoxy(5,23) ;
cout <<"\7Record Modified" ;
getch() ;
}
//**********************************************************
// MAIN FUNCTION CALLING INTRODUCTION AND MAIN MENU
//**********************************************************
void main(void)
{
MENU menu ;
menu.introduction() ;
menu.main_menu() ;
}
FUTURE SCOPE OF THE PROJECT

Our project will be able to implement in future after making some changes and modifications as
we make our project at a very low level. This project is seems to be very useful in future for the
management of library.