Scribd Logo
Upload

Welcome to Scribd!

  • 119 views

    7th Semester UET Taxila

    Uploaded by

    Rameez Anwar
    This document contains information about courses for the 7th semester of the Mechanical Engineering Department at the University of Engineering and Technology (UET) Taxila. It includes the scheme of studies listing 5 courses, their credit hours and marks. It also includes the time table scheduling these courses across days of the week. The document further provides detailed course outlines for each of the 5 courses, describing the topics to be covered and recommended textbooks. The courses included are Internal Combustion Engines, Instrumentation and Control, Industrial Engineering II, Refrigeration and Air Conditioning, and Mechanical Vibrations.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    7th Semester UET Taxila

    Uploaded by

    Rameez Anwar
    119 views4 pages
    This document contains information about courses for the 7th semester of the Mechanical Engineering Department at the University of Engineering and Technology (UET) Taxila. It includes the scheme of studies listing 5 courses, their credit hours and marks. It also includes the time table scheduling these courses across days of the week. The document further provides detailed course outlines for each of the 5 courses, describing the topics to be covered and recommended textbooks. The courses included are Internal Combustion Engines, Instrumentation and Control, Industrial Engineering II, Refrigeration and Air Conditioning, and Mechanical Vibrations.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains information about courses for the 7th semester of the Mechanical Engineering Department at the University of Engineering and Technology (UET) Taxila. It includes the scheme of studies listing 5 courses, their credit hours and marks. It also includes the time table scheduling these courses across days of the week. The document further provides detailed course outlines for each of the 5 courses, describing the topics to be covered and recommended textbooks. The courses included are Internal Combustion Engines, Instrumentation and Control, Industrial Engineering II, Refrigeration and Air Conditioning, and Mechanical Vibrations.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    119 views4 pages

    7th Semester UET Taxila

    Uploaded by

    Rameez Anwar
    This document contains information about courses for the 7th semester of the Mechanical Engineering Department at the University of Engineering and Technology (UET) Taxila. It includes the scheme of studies listing 5 courses, their credit hours and marks. It also includes the time table scheduling these courses across days of the week. The document further provides detailed course outlines for each of the 5 courses, describing the topics to be covered and recommended textbooks. The courses included are Internal Combustion Engines, Instrumentation and Control, Industrial Engineering II, Refrigeration and Air Conditioning, and Mechanical Vibrations.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    2k9 Mechanical UET Taxila

    University of Engineering & Technology Taxila


    Mechanical Engineering Department

    Scheme of Studies for 7th Semester


    Course No. ME-401 ME-402 ME-403 ME-404 ME-405 Course Title Internal Combustion Engines Mechanical Vibration Refrigeration & Air-conditioning Industrial Engineering-II Advanced Manufacturing System Total Term Total for Part-I & II Credit hours Part I Part II 2 1 3 1 3 1 2 1 2 1 12 5 17 Marks Part I Part II 100 50 100 50 100 50 100 50 100 50 500 250 750

    Time Table for 7th Semester


    Monday Wednesday Thursday 7th Semester (2009).w.e.f 03/09/2012 Section A-A1(01-37), A2(39-75), A3(77-115), A4(117-onwards) 1-3(MV / R&AC) 1-3 R&AC 1-3 (ICE) A3 / A4 1-3 (IE II / I&C) A1 / A2 4-5 ICE 4-5 I&C A1 / A2 4-6 (MV / R&AC) 6-7 IE II 4-6 (IE II / I&C) A3 / A4 A3 / A4 4-6 (ICE) A1 / A2 Section B-B1(02-32,42,111,113,142), B2(34-72), B3(74-110), B4(112-onwards) 1-3 (ICE) B1 / B2 1-2 IE II 1-3 R&AC 1-3 (MV / R&AC) 1-3 (IE II / I&C) 3-4 I&C 4-6 ICE B3/B4 B1 / B2 B3 / B4 6-7 ICE 4-6 (MV / R&AC) 4-6 (IE II / I&C) B3 / B4 B1 / B2 Tuesday Friday

    1-3 MV

    4-6 MV

    http://2k9meduettaxila.wordpress.com

    Page 1/4

    2k9 Mechanical UET Taxila

    Proposed Curriculum for 7th Semester by PEC

    Internal Combustion Engines:

    Engine classification, Combustion reaction of engine fuels, real engine cycle. Working principles of SI and CI engines, Ignition delay and combustion phases of SI and CI engines. Testing and performance characteristics of petrol and diesel engines under variable condition of load and speed. Knocking characteristics, Octane and Cetane numbers, engine valve timing and ignition advance and retard, Pressure-crank angle diagram. Working principle of turbo- charged engine, its performance characteristics and comparison with naturally aspirated engine of equal power. Engine emissions and their control through in cylinder and out-cylinder techniques. Exhaust gas recirculation (EGR) system. Thermal reactor and catalytic converters. Trade off of NOx and HC emissions. Fuel injected petrol engine and its performance, advantages over conventional petrol engine. Engine performance under part cut-out conditions and fuel savings Introduction to duel fuel / multi fuel engines, CNG engines. Engine lubrication and lubricants, fuel additives. Classification, configuration and working principles of IC Engines. Analysis of Intake and Exhaust. Measurement of fuel and air consumption, volumetric efficiency, supercharging, effect of air-fuel ratio and compression ratio on engine power & efficiency, pumping work, effect of residual gases on intake temperature, injection of fuel, carburetors/fuel injector, ignition system development, exhaust gas analysis and air pollution, control of exhaust gas contents, energy emissions. Fuels and Combustion. Gasoline characteristics, alcohol refining and octane & cetane rating, diesel fuel oil classification, gas turbine & jet fuel, additives, combustion equation, CNG. Theoretical flame temperature, reaction rate and flame propagation, methods of igniting fuel, auto ignition, knock and the engine variable detonation, combustion theories, ignition delay, chemical equilibrium and dissociation, energy charts for unburned air mixtures, stratified charge engine, combustion chamber requirement. Lubricants. Engine lubrication systems, additives for lubricants. Engine Characteristics. Valve timing, torque & mean effective pressure, comparison of real cycles with the ideal cycle, indicated power, brake power, specific fuel consumption, heat balance sheet, relation between indicated thermal efficiency and load, SI & CI engines comparison, speed and load control in SI & CI engine, high output engines, and turbocharged engines.

    Recommended Books

    1. Internal Combustion Engine Fundamentals 2 Edition By J.B. Heywood McGraw Hill rd 2. Introduction to I. C. Engines 3 Edition By Richard Stone Palgrave Macmillan 3. Internal combustion engines By C-F Taylor. MIT Press

    nd

    Instrumentation & Control:


    Instrumentation & Measurementation:- Significance of measurement, planning of experiments, general measurement system, calibration, static and dynamic measurement sensitivity, range, accuracy precision, repeatability, and uncertainty of instruments, measurement errors. Instruments for measurement of length, force, torque, frequency, pressure, flow and temperature. Introduction to data acquisition through computers. A/D and D/A converters. Control Engineering:- Basic Concepts. System, control system, input, output, open-loop and closed loop control systems, elements of a general control system, examples of control system. Mathematical Modeling of Physical System. Free body diagram and Newtons law of motion, operational notation, grounded chair representation, series parallel laws, equations of motion for spring mass damper systems, levered system, rotational system, geared system, electrical components and R.L.C circuits, electrical analogies for mechanical systems, scale factors, thermal systems and fluid system.

    http://2k9meduettaxila.wordpress.com

    Page 2/4

    2k9 Mechanical UET Taxila


    Transfer Functions and Systems Response. Review of Laplace transform, impulse, step and ramp functions, concept of transfer functions of common components, block diagram algebra, signal flow graphs, impulse, step, and ramp response of first and second order systems, characterization of response (time constant, gain, overshoot, rise time, setting time, steady state error, etc.) relation of system response to location of system poles and zeros. Stability of Control System. Concept of stability, Routh Hurwitz criterion. Root locus Methods and its Use in Control System Design Introduction to Digital Control

    Recommended Books
    1. 2. 3. 4. 5. 6. Measurement Systems Applications and Design, by E. Doeblin, McGraw Hill Theory and Design for Mechanical Measurements, by R. Figliola, And D.Beasley, John Wiley. Automatic Control, by Francis H. Raven Modern Control System, by Richard C. Dorf Automatic Control, by J.J Distofano et al. Automatic Control Systems, by B. B. Kuo

    Industrial Engineering II:


    Operations Functions: Historical Evolution of Production and Operations Management (P.O.M). Production vs Service. A system View, Strategic Management Contemporary P.O.M Role of Models in P.O.M. Productivity Improvement Product and Process Design: Product Life Cycle, Design Procedure, Choice of Technology, Equipment Selection Procedure. Learning Curves. Forecasting the Production Levels. Useful Forecasting Models. Capacity Planning. Expansion of Productive Systems. Industrial Management: Labour Relations. Salary and Wages. Industrial Safety and Environment. Production Planning & Control: Fundamentals. Mathematical Models. Make vs Buy. Inventory Control Practices. Aggregate Planning. Disaggregation Project Management Operations Scheduling Performance Measures for Shop Floor Control, Dispatching Rules. Requirement Planning MRP-II. Modern Trends: Just In Time (JIT) and Group Technology (GT) Japanese P.O.M. Automated Factories of Year 2000.

    Recommended Books

    1. Production & Operations Management (5 Ed.) By: Everett E. Adam, Jr. and Ronald J. Ebert 2. Analysis and Control of Production System By: Elashed and Boucher. nd 3. Production and Operations Management (2 Ed.) By: Thoums and McClain (Prentice Hall)

    th

    Refrigeration & Air Conditioning:


    Brief History of Refrigeration, the refrigeration cycle, Air Cycle and Heat Pumps, Reverse Carnot cycle, the vapor-compression cycles, coefficient of performance, introduction to pressure-enthalpy charts. Refrigerants. Components of a refrigerating system, leakage, domestic and commercial applications. Air cycle refrigeration, Steam jet refrigeration, Vapor absorption refrigeration, Low temperature refrigeration and their applications. Psychometry, basic airconditioning processes, load calculation, systems of air conditionings, humidification & economics of system dehumidification, humidifiers, air distribution systems, insulation materials. Industrial air-conditioning.

    Recommended Books
    1. 2.

    3.

    Refrigeration and Air Conditioning by : W.F. Stoecker & Jones Refrigeration and Air Conditioning by K. L. Dossat Refrigeration and Air-conditioning by Arora

    Mechanical Vibrations:
    Oscillatory motion. Harmonic motion, periodic motion, vibration terminology.

    http://2k9meduettaxila.wordpress.com

    Page 3/4

    2k9 Mechanical UET Taxila


    Free vibrations. Equation of motion, energy method, viscously damped free vibration, logarithmic decrement, harmonically excited vibration, forced harmonic vibration, vibration isolation, vibration measuring instruments. Single degree of freedom systems. Equation of motion: Newtons method, energy method, undamped free vibration, viscously damped free vibration, logarithmic decrement, harmonically excited vibration, vibration isolation, vibration measuring instruments. Two degree of freedom system. Normal modes of vibration, coordinate coupling, forced harmonic vibration, vibration absorber, vibration damper. Orthogonality. Vibration of Elastic Bodies. Free and forced vibration of cables and uniform bars, free and forced lateral vibrations of simply supported thin beams, torsional vibration of circular shafts with single rotor and two rotors, critical speed of rotating shafts. Finding natural frequencies: Rayliegh method and Holzer method. Measurement of Vibrations.

    Recommended Books
    1. 2. 3. 4.

    Mechanical Vibrations : Theory & Applications 5 Edition by W.T. Thompson [Prentice Hall] rd Mechanical Vibrations by S. S. Rao 3 Edition. [McGraw Hill] Elements Of Vibration Analysis by L. Meirovitch, McGraw Hill 2001 Vibrations for Engineers by Andrew Dimargonas, Prentice Hall 1996

    th

    THIS COURSE CONTENT HAS BEEN TAKEN FROM: Curriculum of Mechanical Engineering (2003), HEC Pakistan Revised Curriculum of Mechanical Engineering (2008), HEC Pakistan Courses of Reading for B.Sc. Mechanical Engineering (1996), FM&AE, UET Taxila

    Monday, September 03, 2012 07:35:43 PM Have a Salubrious semester ahead. Rameez Anwar ([email protected])

    http://2k9meduettaxila.wordpress.com

    Page 4/4

    You might also like