Fujitsu Pds4233 Pds4234w e H
Fujitsu Pds4233 Pds4234w e H
Fujitsu Pds4233 Pds4234w e H
Copy Prohibited
CONTENTS
IMPORTANT INFORMATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 SETTING SIGNALS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 PART NAMES AND FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 VIDEO MODE ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 RGB MODE ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 TROUBLESHOOTING USING LED AND OSD . . . . . . . . . . . . . . . . . . . 12 TROUBLESHOOTING FLOWCHART . . . . . . . . . . . . . . . . . . . . . . . . . . 13
VS AND Vd ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 GENERAL CONNECTION DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . 18 DISASSEMBLY PROCEDURES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 TRANSPORTATION AND HANDLING RESTRICTIONS . . . . . . . . . . . . 32
-1-
IMPORTANT INFORMATION
WARNING : TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
Please use a screen saver to prevent burning of an after-image on the screen. Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order not to defeat the safeguards incorporated into this unit, observe the following basic rules governing its installation, use and service. Please read these "Important Safeguards" carefully before use. Read all the safety and operating instructions before operating the unit. Retain the safety and operating instructions for future reference. Adhere to all warnings on the unit and in the operating instructions. Follow all operating instructions. Unplug the unit from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Do not use attachments not recommended by the manufacturer as they may be hazardous. Do not use the unit near water. Do not use the unit immediately after moving it from a low temperature to a high temperature environment, as this causes condensation, which may result in fire, electric shock, or other hazards. Do not place the unit on an unstable cart, stand, or table. The unit may fall, causing serious injury to a child or adult, and serious damage to the unit. Mount the unit according to the manufacturer's instructions, using the mount recommended by the manufacturer. When the unit is used on a cart, avoid quick stops, excessive force, and uneven surfaces which may cause the unit and cart to overturn, damaging the unit or causing possible injury to the operator. When transporting by car, place the unit as shown in the figure. Slots and openings in the cabinet are provided for ventilation. These ensure reliable operation and protect the unit from overheating. These openings must not be blocked or covered. (The openings should never be blocked by placing the unit on a bed, sofa, rug, or similar surface. The unit should not be placed in a built - in installation such as a bookcase or rack unless proper ventilation is provided and the manufacturer's instructions are adhered to.) For proper ventilation, separate the unit from other equipment, which may obstruct ventilation. Keep the unit at least 10cm from other equipment. Operate only with the type of power source indicated on the label. If you are not sure of the type of power supply to your home, consult your dealer or local power company. This unit is equipped with a three-wire plug. This plug will fit only into a grounded power outlet. If you cannot insert the plug into the outlet, have an electrician install the proper outlet. Do not defeat the safety purpose of the grounded plug. Route power cords so that they are not likely to be walked on or pinched by items placed on or against them. Pay particular attention to cords at doors, plugs, receptacles, and where they exit from the unit. For added protection during a lightning storm, or when the unit is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cabling. This will prevent damage to the unit by lighting and power line surges. Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in fire or electric shock. Never push objects of any kind into this unit through openings as they may touch dangerous voltage points or short-circuit parts that could result in a fire or electric shock. Never spill liquid of any kind onto the unit.
-- 2 -2
Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltages and other hazards. Have all service done by qualified service personnel. Unplug this unit from the wall outlet and have it serviced by qualified service personnel in the following cases: a) If the power supply cord or plug is damaged. b) If liquid has been spilled, or objects have fallen onto the unit. c) If the unit has been exposed to rain or water. d) If the unit does not operate normally by following the operating instructions. Adjust only those controls that are covered by the Operation Manual, as improper adjustment of controls may result in damage and will often require extensive work by a qualified technician to restore the unit to normal operation. e) If the unit has been dropped or damaged in any way. A distinct change in performance indicates that service is required. When required, be sure the service technician uses replacement parts specified by the manufacturer or parts with the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock, or other hazards. Upon completion of any service of repairs, ask the service technician to perform safety checks to determine that the unit is in proper operating condition. Place the unit more than one foot away from heat sources such as radiators, heat registers, stoves, and other devices (including amplifiers) that produce heat. When connecting other devices such as VCR's and personal computers, turn off the power to this unit to protect against electric shock. Do not place combustibles such as cloth, paper, matches, aerosol cans or gas lighters that prevent special hazards when overheated behind the cooling fan. Use only the accessory cord designed for this unit to prevent shock. The power supply voltage rating of this unit is AC100-240V, but the attached power cord conforms to the following power supply voltage. Use only the Power Cord designated by our dealer to ensure Safety and EMC. When used with other power supply voltages, the power cable must be changed. Consult your local dealer.
Power Cord
AC 100 - 125 V
AC 200 - 240 V
-3-
SPECIFICATIONS
Power requirement Current drain Display panel Screen size Aspect ratio Number of pixels Pixel pitch Contrast ratio Brightness Viewing angle Input Terminals Video input S video input 100-240V, 50/60Hz 3.5A 92.1 (W) x 51.8 (H) [cm] 36.3 (W) x 20.4 (H) [inch] 16 : 9 852 (H) x 480 (V) pixels 1.08mm x 1.08mm PDS4233/4234 1500 : 1 (typ.) 700 cd/m2 (typ.) Max. 160 degrees BNC connector 1.0VP-P /75 S terminal Y signal:1.0VP-P /75 C signal:0.286VP-P /75 Three BNC terminals Y : 1V P-P /75 Pb /B-Y: 0.7V P-P /75 Pr /R-Y: 0.7V P-P /75 DVI-D terminal mD-sub:15pin (3 row type) Video : 0.7V P-P /75 SYNC signal : TTL level BNC terminal x 5 R: 0.7V P-P/75 G: 0.7V P-P/75 B: 0.7V P-P/75 H: TTL level or 0.3VP-P /75 V: TTL level or 0.3VP-P /75 8 memories (each RGB1,2) Horizontal :15.63 to 80.0MHz Vertical : 50.0 to 120Hz Dot clock:50MHz Max XGA 68MHz Max D-sub 9 pin terminal NTSC/PAL/SECAM/N-PAL/M-PAL /4.43NTSC/PAL60 16.7 million (256 each for R.G.B.) 2 pin terminals(one system) 500mVrms/22k Level terminal 9W+9W (L/R), 8 Width : 103.5cm (40.7 inch) Height: 64.0cm (25.2 inch) Depth : 8.5 cm ( 3.3 inch) 28.5kg UL,CSA Safety: UL1950 CSA C22.2 No.950 EMC: FCC Part15 Class A ICES-003 Class A CE Safety: UL1950 CSA C22.2 No.950 FCC Part15 Class B ICES-003 Class B Environment (Operating) Temperature 0 to 40 C Relative humidity 20 to 80% Pressure 720 to 1,100 hPa
Accessories
User's manual Remote controller Batteries (Type AA x 2) Power cord Ferrite core (2) P-42TT33 P-42WB12 Horizontal Vertical P-42CT11 Available installation angle 0 to 15 0 to 5 installation angle 0 to 15
PDS4233W/E-H
PDS4234W/E-S
RGB 3 input
EN60950 A1 A2 A3 A4
EN60950 A1 A2 A3 A4
RS-232C Color system Display colors Audio input Effective max. output Dimensions
EMC : EN55022 A1/A2 Class A EN61000-3-2,1995 EN61000-3-3,1995 EN55024 1998 EN61000-4-2,1995 EN61000-4-3,1996 EN61000-4-4,1995 EN61000-4-5,1995 EN61000-4-6,1996 EN61000-4-8,1993 EN61000-4-11,1994 AS
EN55022 A1/A2 Class B EN61000-3-2, 1995 EN61000-3-3, 1995 EN55024 1998 EN61000-4-2, 1995 EN61000-4-3, 1996 EN61000-4-4, 1995 EN61000-4-5, 1995 EN61000-4-6, 1996 EN61000-4-8, 1993 EN61000-4-11, 1994
Safety : IEC950 A1/A2/A3/A4 IEC950 A1/A2/A3/A4 EMC : AS/NZS 3548 AS/NZS 3548
Net weight
-4-
SETTING SIGNALS
This display can store parameter settings for eight additional signals for RGB. To do this, select the desired signal and follow "RGB MODE ADJUSTMENT" in the manual to adjust the parameters. When you finish, the settings will be automatically stored.
* With some input signals, Out of range may appear even when the horizontal and vertical frequencies are within their permissible ranges. Make sure that the vertical frequency of the input signal is 85 Hz or less for SVGA, 75 Hz or less for XVGA/ SXGA , 60 Hz or less for UXGA.
-5-
FACTORY SET SIGNALS (Component video mode) Horizontal frequency (kHz) Vertical frequency (Hz) Signal
FACTORY SET SIGNALS (Video, S-video mode) Horizontal frequency (kHz) Vertical frequency (Hz) Signal
SDTV 480i SDTV 576i SDTV 480p SDTV 576p HDTV 720p HDTV 720p HDTV 1,080i HDTV 1,080i
The dedicated graphics card is optional. In the 800 x 600 and 1,024 x 768 modes, images of reduced size are displayed on the screen, using size reduction and interpolation. Also note that on-screen information is also displayed in reduced size. " Out of range" appears if the display receives a signal whose characteristic does not fall within the display's permissible range. You can check the input signals with "Information" on the OTHERS Menu screen.
The sync switch (TTL/ANALOG switch) is on the rear of the 13-pin horizontal sync and 14-pin vertical sync terminals.
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 Outer side
Ground
1 2 3 4 5 6 7 8 9
DCD (Data Carrier Detect) RD (Receive Data) TD (Transmit Data) DTR (Data Terminal Ready) GND (Ground) DSR (Data Set Ready) RTS (Request To Send) CTS (Clear To Send) RI (Ring Indication)
-6-
CONNECTION
POWER INPUT
RS-232C
S-VIDEO INPUT
VIDEO INPUT
AUDIO 2 INPUT
AUDIO 1 INPUT
To receptacle
Connection to AV equipment
Connection to PC
-7-
RGB
VIDEO
WIDE
MENU VOL
ENTER
SHIFT 1
Power ON button [POWER ON] Turns the power ON. Power OFF button [POWER OFF] Turns the power OFF. RGB input mode selector button [RGB] Switches between RGB input modes. Video input mode selector button [VIDEO] Switches between video input modes. Wide screen selector button [WIDE] Switches the screen over to a desired wide screen. Menu button [MENU] Use this button to display a desired menu for adjusting the picture. Volume adjustment buttons [VOL +/-] Adjust the volume. Press the + button to increase the volume. Press the - button to reduce the volume. Adjustment buttons [ / / / ] Use these buttons to scroll through options in a menu and change values. Enter button [ENTER] Press this button to finalize the selection of a desired menu or option within a menu. Display selector buttons [SHIFT 1-4] When you use two or more displays, you can use these buttons to control up to four displays by assigning an unique number to each display.
Bottom
External speaker output terminal (EXT SP) Connect this terminal to the optionally available speaker. (Use a speaker with 4 to 16 .) See the speaker instruction manual for more information. Sound 1 input terminal (AUDIO 1 INPUT) Connect this terminal to the sound output terminal of your VCR, etc. Sound 2 input terminal (AUDIO 2 INPUT) Connect this terminal to the sound output terminal of your VCR, etc. Video input terminal (VIDEO INPUT) Connect this terminal to the video output terminal of your VCR or video disk player. S-video input terminal (S-VIDEO INPUT) Connect this terminal to the S-video output terminal of your VCR or video disk player. RS-232C terminal (RS-232C) This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC. When connecting a cable, attach a ferrite core to the cable. RGB 1 input terminal (RGB 1 INPUT/DVI-D) Connect this terminal to the PC's display (digital RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal. The connection cable No.88741-8000 made by molex Inc. is recommended. RGB 2 input terminal (RGB 2 INPUT/mD-sub) Connect this terminal to the PC's display (analog RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal. RGB 3 synchronization switch (SYNC SW TTL/ANALOG (75 )) This switch is used to terminate horizontal (H) terminal and vertical (V) terminal, out of RGB3 input terminals, with 75 . TTL : Used when sending RGB signals from the PC to the RGB terminal
ANALOG (75 ) : Used when sending analog synchronization signals to the RGB terminal + RGB 3 input terminal (RGB 3 INPUT/BNC) Connect this terminal to the PC's display (analog RGB)output terminal or decoder (digital broadcast tuner,etc.) output terminal. When RGB3 input terminal is connected, Comp.video mode is not available. Component video input terminal (COMPONENT VIDEO INPUT) Connect this terminal to the component video output (color difference output) terminal of your HDTV unit or DVD player. When Comp.video input terminal is connected, RGB3 mode is not available. Power input terminal Connect this terminal to the power cable supplied with the display. When connecting a cable, attach a ferrite core to the cable.
-9-
VIDEO
WIDE
Normal
Noise Reduction
POSITION/SIZE
Wide 1
Position Size
{-30 to +30 (Comp. Video -16 to +16)} {-7 to +7 (Zoom : -15 to +15) (Comp. Video -16 to +16)} {-7 to +7 (Comp. Video -4 to +4)} {-7 to +7 (Comp. Video -4 to +4)}
AUDIO
Wide 2
FEATURES
Mask Off
On Off On Off On Off Normal +90 Deg. -90 Deg. English Deutsch Espanol Francais Italiano Portugues Pycck N Auto NTSC PAL SECAM PAL 60 N-PAL M-PAL 4.43 NTSC Auto NTSC PAL SECAM PAL 60 N-PAL M-PAL 4.43 NTSC RGB PC Decoder Comp. video Function Time Mask Off 5 10 15 Mask Off 5 10 15 Mask 5
On Screen Menu
Zoom2
Language
Mask 10
*Only E-model
Input Terminal
Video Input
Mask 15
Horizontal "+"
S-Video Input
Vertical "-"
BNC Input
D-Sub Input
Vertical "+"
Others
DPMS
Background
Size Width "-"
Audio Input
No Audio Audio 1 Audio 2 Off RGB2 RGB3 Video S-Video Comp. Video 0 1 2 3 4 Off On Off On Horizontal Vertical Off On Mode Monitor No. Freq. Scan Mode Input Signal Freq.
Input Priority
Width "+"
Monitor No.
Height "-"
- 10 -
VIDEO
Color Temp.
WIDE
POSITION/SIZE
Position Size
FEATURES
Vertical Sync. {-1 to +1} Clamp Position {-8 to +8} Auto Calibration On Screen Menu Zoom OSD Rotate Language OSD Execute On Off
Normal +90 Deg. -90 Deg. English Deutsch Espanol Francais Italiano Portugues Pycck N Auto NTSC PAL SECAM PAL 60 N-PAL M-PAL 4.43 NTSC Auto NTSC PAL SECAM PAL 60 N-PAL M-PAL 4.43 NTSC
Yes No Mask 5
Video Input
Mask 15
S-Video Input
Horizontal "+"
BNC Input
Mask
Vertical "-"
Background
No Audio Audio 1 Audio 2
Mode/Time
Moving Area
Off RGB2 RGB3 Video S-Video Comp. Video 0 1 2 3 4 Auto VGA WVGA 480P XGA WXGA SXGA SXGA+
Height "-" Code Setting White Screen Height "+" Exhibition Mode Installation Key Lock Information FACTORY DEFAULT Execute Yes No
Mode Monitor No. Freq. Scan Mode Input Signal Freq. Preset No.
- 11 -
On screen display
ERROR MESSAGE CONDITION 1
Check point
Fan Main power PCB Main/Digital PCB
(2) LED
Check point
4 times Flashes four times every 7 sec. (Red) 5 times Flashes five times every 8 sec. (Red)
Main/Digital PCB
- 12 -
TROUBLESHOOTING FLOWCHART
LED lamp blinking
Note : 1. Protector operates when connector P4(CN4) is disconnected and power is turn off.
Turn power on and check state of lamp. LAMP STATE Not lighted. POWER SUPPLY STATE Power supply circuit faulty. REMEDY Replace Power Supply PCB. Vs and Vd must be adjusted. RED
Power turned off immediately. Power turned off after 10 sec. Power turned off after 10 sec. Power not turned off, LED blinks only. Power not turned off, LED blinks only.
Check 1
RED
Blinks once
Check 2
RED
Blinks twice
Check 3
RED
RED
GREEN
Lights steadily for more than 10 sec. Is on-screen display normal? YES All input image faulty. Video input image faulty. S-video input image faulty. Component video input image faulty. RGB 1,2 input image faulty.
- 13 -
Replace Main/Digital PCB Assy. Replace Video PCB Assy. Replace Video PCB Assy. Replace Main/Digital PCB Assy.
Check 1
Start
(1) Turn the main power off and disconnect the connector P2,P3,P4,P5 and P6 on the Main Power PCB. (2) Connect pin 1 and pin 13 of P2 through a 1/4W, 1k resistor. Connect pin 1 of P4 and pin 9 of P6 (3) Turn the main power on again. (4) Measure during relay turning on and off.
Is voltage at connector P5 pin 10(Vs) 160V and pin 7(Vd) 65V on Main Power PCB ? No
Yes
- 14 -
Check 2
Fan protector operated
Check 3
Temperature protector operated Start
Power lamp: Flashes once intermittently in red. (For 0.5 sec. at an interval of 3 sec.)
Power lamp : Flashes intermittently twice in red. (For 0.5 sec. at an interval of 5 sec.)
Start
Is voltage at connectors P951 3pin, P953 3pin and P954 3pin on Main/Digital PCB 14V?
- 15 -
No
Fan faulty
Replace fan.
Replace Main/ Digital PCB Assy. Yes Temperature sensor IC757 faulty. Replace temperature sensor IC757.
Temperature sensor cooling The temperature sensor IC757 is installed on Main/Digital PCB. Turn the power off and cool with a point cooler.
Check 4
RGB input is abnormal. Start
Is horizontal sync. signal input to pin 13 and vertical sync signal input to pin 14 of RGB cable ?
Yes
- 18 - - 16 -
Connect RGB cable to terminal. Is Sync. switch No (TLL/ANALOG) selected correctly ? Yes(ANALOG) Yes Is Sync. signal polarity negative ? Check input signal.
Is frequency of horizontal sync. and vertical sync signals within specified range ?
Yes No Check input signal. Make sync. signal polarity output from signal source negative, or make output impedance TTL.
Yes
Signal processing circuit faulty. f . Note(): If the synchronizing signal cannot be identified by TTL level, it is in the 75 terminated state.
V S AND V d ADJUSTMENT
When the Main Power Supply PCB and PDP panel are replaced, Vs and Vd must be adjusted.
Adjustment time Adjustment signal Check points Adjustment points Adjustment value
Within 3 minutes after power on. Adjust the Vs and Vd in the no-signal state. Refer to the drawing shown below. Refer to the drawing shown below. Within +/- 0.1V of voltage indicated on the label on the PDP panel.
Vs & Vd check point P6 1 pin Vs 2 pin Vs 4 pin Vd 5 pin GND 6 pin GND
P5 1 P6 9
L2
T3
RV4 Vd ADJ. T2
L1
- 17 -
M4
AC(N)
CN1 (DF7-2P)
AC(L)
P1
NP42B2MF02
P7 P4
CN507 (VH-2P)
1 GND +14V 2
P2
CN352 (B13B-PH-K-S)
1 P5V +14V +14V GND -8V GND RE12.5V GND GND PSIATE0 PSIATE1 ACON RELAY 13
P3
CN351 (VH-10P)
10 +8V GND +5V GND +3.3V GND +2.5V +2.5V GND GND 1
P6
CN105 (B9B-VH-B)
1 VS VS N.C. VC GND GND VCC GND GND 9
P5
CN104 (B10B-VH)
1 LVP GND GND VCC GND GND VC N.C. VS VS 10
CN105 (B9B-VH)
1 VCC1 GND GND GND GND N.C. VS VS VS 9
CN201 (F1-TWE31PB-VF)
1 LVDS
CN104 (B10B-VH)
1 LVP GND GND VCC GND GND VC N.C. VS VS 10 1
(EH-2P)
1 2
CN3002
13 RELAY ACON PSIATE1 PSIATE0 GND GND RE12.5V GND -8V GND +14V +14V P5V 1 10 +8V GND +5V GND +3.3V GND +2.5V +2.5V GND GND 1 5 +5V LEDR LEDG REMOCON GND 1 1 GND KEYIN0 KEYIN1 KEYIN2 KEYIN3 KEYSCAN1 KEYSCAN2 KEYSCAN3 8 CN751 (B8B-PH-SM3-TB) +14V FANPRM1 +14V FANPRM3 GND +14V FANPRM4 GND
CONNECTION PCB
M00BWF
CN3001 (TX25-60P)
6 N.C. GND DATA CLK CE MUTE 1 2 GND +14V
(TX25-60P)
CN352 (S13B-PH-SM3-TB)
0500205349
0500205301
0500205349
92 FAN 40 FAN
M00BWE
92 FAN
CN1004 (TX24-30R-6ST-H1) 0500848539
P954 (S3B-PH-SM3-PH)
P953 (S3B-PH-SM3-TB)
CN701 (TX24-60P)
P1001 (TX24-60P)
20
0500200382
Y TYP SMT
M01AX
M00BWA
M00BWB
MAIN / DIGITAL
(SIGNAL PROCESSING) CN401 M-SUB 15PIN CN301 DV1 24P P902 D-SUB 9PIN CN202 (VH-2P)
VIDEO AUDIO
S.TERMINAL (BNC) J1202 J1200 TER1 J1
TERMINAL
(BNC) CN1001 (BNC) CN1002 SW1001
RGB1
RS232C
AUDIO 2
AUDIO 1
AUDIO INPUT
M00BWC
M00BWD
M00BWH
ENTER
KEY SWITCH
POWER SWITCH
18
DISASSEMBLY PROCEDURES
1.Removing the Rear Case
C : Video PCB
- 19 -
D : Audio PCB
1) Remove the Rear Case. 2) Remove 2 circled screws and remove the Option Frame.
- 20 -
3) Remove the circled screw and remove the Interface PCB from the Main Digital PCB.
- 21 -
6) Remove the 4 screws at the shield bracket of the Main Digital PCB, and remove the shield bracket.
- 22 -
- 23 -
1) Remove the Rear Case. 2) Disconnect the circled connectors CN751, CN752, P7and remove their wires to the outside of the Main Unit.
3) Remove the 6 circled screws. (Two screws indicated by the arrows are inside stand cover)
4) Remove the Base Frame from the Front Case together with panel and PCBs.
- 24 -
View after the Front Case Panel Unit and PCBs removed. 5) Remove the 12 circled screws.
6) Disconnect the circled connector and Base Frame together with the other parts.
- 25 -
View after only the PDP Unit removed. Replace the parts which are already mounted correctly, when the PDP Unit is replaced.
- 26 -
1) Remove the 2 circled Cover Stands and remove the screw in the holes.
3) Lift the Bezel Front upward to remove it. (The top of the Bezel Front is hooked.)
- 27 -
1) Remove the Bezel Front. 2) Remove the 14 screws on the Filter Holders at each side.
- 28 -
- 29 -
The Video PCB can be removed without moving the Rear Case. 1) Remove the 4 circled screws.
3) Remove 5 screws from the Video PCB Unit. Note: Three kinds of screws are used on this Video Unit. Be careful not to make any mistakes when reinstalling.
- 30 -
PARTS LIST
Ref. No. Description Cabinet Case Front Case Rear Bazel Front Cover Stand Cover Stand L Cover Stand R Holder Filter (L/R) Holder Filter (T/B) Holder Key Switch Electric Fan Motor DO4R-12TM Fan Motor DO9A-12PH Optical Filter Audio PCB Assy Connection PCB Assy I/O PCB Assy Key Switch PCB Assy LED/PHOTO PCB Assy Main Digital PCB Assy Video PCB Assy Main Power PCB Assy PDP Unit Noise Filter Power Cord UL.CSA VDE Remote Control Unit Packing Carton Top Carton Bottom Packing Joint-D Packing Pad-Top Packing Pad-Bottom PDS4233W-H PDS4233E-H PDS4233W-S PDS4233E-S PDS4234W-S PDS4234E-S 8111430006 8112684002 8112000000 8108298008 ------------------------------8110619006 8110614001 8108067000 8900291009 8900233009 8112396004 8112577007 8112583008 8112585002 8112581004 8112579001 8112997003 8112575003 8112608008 8112595001 0400222729 8111725003 ---------------8108442005 8113152005 8108658000 8108655009 8111629004 8111630000 : Same as left ---------------8111726000 8111725003 ---------------8110867001 ---------------8111726000 8111725003 ------------------------------8111726000 8112397001 8112806008 8108066003 ------------------------------8112905008 8112807005 ------------------------------------------------------------8112966009 ---------------8108360002 8108585009 ----------------
- 31 -
Handling
Never topple. Never drop.
- 32 -
4
Don't stack the plasmavision over three units high.
- 33 -
MEMO
- 34 -
0202J1957