Scribd
Upload
154 views

Shallow Foundation Design

This document discusses the design of shallow footings according to the Egyptian code of practice. It provides parameters for footing number 18 including load, geometry, reinforcement, and allowable stresses. The structural design calculations check moments, shear forces, and punching shear. Reinforcement areas are calculated and meet the minimum requirements.

Uploaded by

Gourav Jain
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
154 views

Shallow Foundation Design

This document discusses the design of shallow footings according to the Egyptian code of practice. It provides parameters for footing number 18 including load, geometry, reinforcement, and allowable stresses. The structural design calculations check moments, shear forces, and punching shear. Reinforcement areas are calculated and meet the minimum requirements.

Uploaded by

Gourav Jain
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

f,mm 10 12 16 18 20 22 25 32

Design of Shallow Footings According to the Egyptian code of Practise


Project: Footing No. Parameters Pcolumn bc lc Geometric Design Arequiered APC.actual qPC.actual ARC.actual qRC.actual Structural Design Moments Mcritical dm1 Shear Distance from critical Section Qcritical qshear Punching Shear
Area of Punch Critical Section

Designer:

1870 0.3 0.6 9.35 9.90 189 6.48 289

kN m m m2 m kN/m2 m kN/m2

qall.net tpc qshear.max x BPC < qall.net -> ok LPC BRC LRC

200 0.30 4.50 1.31 3.00 3.30 2.40 2.70

kN/m2 m kg/cm2 m m m m m rounding digits rounding digits

k1 k2 qpunch.max

0.225 1706 9.00

Allowable stress Design

ECP kg/cm2

1 1

Elevation 159.08 t.m/m' 0.28 0.75 216.44 3.61 1.08 m m t/m' kg/cm2 m2

Mcritical dm2 Distance from critical Section Qcritical qshear


Perimiter of Punch Critical Section

Side View 159.08 t.m/m' 0.28 0.75 216.44 3.61 4.2 m m t/m' kg/cm2 m dfinal Cover tRC 0.60 0.07 0.67 m m m

QPunch qpunch Reinforcement As1.calculated Asmin As1

1558.33 kN kg/cm2 6.18 15.54 9.00 15.54 f,mm 10 12 16 18 20 22 25 32 cm2/m' cm2/m' cm2/m' no. of bars/m' 20 14 8 7 5 5 4 2 As2 15.54 f,mm 10 12 16 18 20 22 25 32 cm2/m' no. of bars/m' 20 14 8 7 5 5 4 2 As2.calculated 15.54 cm2/m'

You might also like