Pressure and Vacuum Switches

Pressure and Vacuum Switches for Process Applications
Form 216
are rugged field-mounted instruments. The pressure sensing element of the SOR pressure switch is a force-balance, piston-actuated assembly. The sensing element is sealed by a flexible diaphragm and a static o-ring. A wide selection of wetted parts materials for media compatibility and containment are available. A metal diaphragm may be welded to the pressure port for certain applications, thereby eliminating the o-ring.
SOR Pressure Switches
The SOR pressure switches in this catalog are suitable for a variety of process applications. Basic models with standard wetted parts are normally suitable for air, oil, water and noncorrosive processes. See the Quick Selection Guide on pages 4 and 5. Specific application requirements can normally be met by selecting optional components, such as switching elements, diaphragm systems and pressure ports. See How to Order on page 3. Certain applications may require customized specials. Consult the SOR representative in your area or the factory. This catalog describes switches that are: General Purpose Weathertight Conventional Explosion Proof Other specific types of switches available through your SOR representative are: Hermetically Sealed (for hazardous locations) Pivot Seal (for high shock pressures and cycle rates) Differential Pressure Temperature (remote and direct mount) Electronic and Mechanical Level Electronic Pressure NN
Application Information
B3
LC
sorinc.com sorinc.com 913-888-2630
Form 216 Registered Quality System to ISO 9001 :2008 913-888-2630 1/32
Pressure and Vacuum Switches

Complete Product Line Standard models and customized specials cover pressure range from 30 inches Hg VAC to 4000 psi.

Features
Features and Benefits
Agency Listings/Certification Select models with UL, CSA, ATEX, FM, TIIS, GOST Meets most code and customer requirements.

Robust Construction Rugged, high-cycle rate tolerance, long life, not critical to vibration, high overrange and proof pressures, excellent corrosion resistance to hostile environments.
Instrument Quality High resolution of Set Points, high repeatability, narrow dead band, negligible temperature effect.

Safety Certified to IEC 61508 (SIL) SOR products are certified to IEC 61508 for non-redundant use in SIL1 and SIL2 Safety Instrumented Systems for most models. For more details or values applicable to a specific product, see the Safety Integrity Level Quick Guide (Form 1528).
Wetted Parts Wide selection materials, process connection configurations and sizes. Optional fire-safe pressure sensor.

Built-In Quality Rigid quality standards maintained from raw material to finished product. Service Factory sales engineers and area SOR representatives provide effective and prompt worldwide service.
Snap-Action Electrical Switching Wide selection UL Listed and CSA Certified switching elements for AC and DC service. Optional hermetically sealed capsule for hazardous and hostile environments.
Field Adjustable Self-locking adjustment, no special tools required. No-charge factory calibration.

Delivery Routine shipments 7 to 10 working days. Emergency shipments via same day air.

Warranty 3 years from date of manufacture.
Cost Effective Simple and fast installation without special tools, long service life, no required periodic service or spare parts.

Form 216
2/32
Registered Quality System to ISO 9001 :2008
sorinc.com 913-888-2630

Model Number System
How to Order
6NN-K5-M4-C2A-YY
Piston Housing Switching Piston Element Spring Diaphragm & O-Ring Pressure Port Accessories
Basic SOR pressure switches with standard wetted parts are normally suitable for air, oil, water and non-corrosive processes. The Quick Selection Guide on pages 4 and 5 shows these basic SOR pressure and vacuum switches. Corrosive service and particular customer requirements may require optional components. Refer to How to Order section below to build a customized model number or the dedicated page to locate optional components, such as switching elements, diaphragm systems, pressure ports and accessories. Each position in the model number, except Accessories, must have a designator.
Design and specifications are subject to change without notice. For latest revision, see www.sorinc.com.
Quick Selection Guide
SOR pressure switches in this catalog are suitable for a wide variety of continuous pressure applications. Specific application requirements can normally be met by selecting optional components, such as, switching elements, diaphragm systems and pressure ports. Certain applications may require customized specials. Consult the SOR representative in your area or the factory. Information and data in this catalog are formatted to provide a convenient guide to assist instrument engineers, plant engineers and end users in selecting pressure switches for their unique applications. Steps 1 through 5 are required. Step 6 is optional. Orders must have complete Model Numbers, i.e. each component must have a designator. Step 1: Select Piston Spring adjustable range/Set Point from Specifications (pages 7 & 8). (Piston/Spring combination determines adjustable range.) Step 2: Select Housing for type of pressure switch and service (page 9). Step 3: Select electrical Switching Element for electrical service (pages 10 & 11). Step 4: Select Diaphragm and O-Ring for process compatibility and containment (pages 12 & 13). Step 5: Select Pressure Port for process compatibility and connection (page 14). Step 6: Select Accessories required for service (page 16).
sorinc.com 913-888-2630 Registered Quality System to ISO 9001 :2008 Form 216
Applications
How to Order
3/32
Pressure and Vacuum Quick Selection Guide - Pressure Switches

Basic SOR pressure switches with standard wetted parts are normally suitable for air, oil, water and non-corrosive processes. Corrosive service and particular customer requirements may require optional components. Refer to How to Order on page 3 to locate optional components, such as, housing, switching elements, diaphragm systems, pressure ports and accessories. Each position in the model number, except Accessories, must have a designator.
Weathertight Model Number

12NN - N66 - N4 - B1A 12NN - K614 - N4 - B1A 12NN - K2 - N4 - B1A
Weathertight
Adjustable Range
(increasing pressure)
psi (in. wc.)

(0.6 to 2.5) (2.5 to 45.0) 0.4 to 2.0 0.5 to 6.0 0.75 to 12 1 to 16
Typical Dead Band psi (in. wc.)

(0.4) (0.8) 0.1 0.1 0.1 0.15
Explosion-Proof Model Number

12L - N66 - N4 - B1A 12L - K614 - N4 - B1A 12L - K2 - N4 - B1A 12L - K4 - N4 - B1A 12L - K5 - N4 - B1A 12L - K45 - N4 - B1A Proof 400 (psi)
Explosion Proof
12NN - K4 - N4 - B1A 12NN - K5 - N4 - B1A 12NN - K45 - N4 - B1A Piston 12
Overrange 200 (psi)

4NN - K2 - N4 - B1A 4NN - K4 - N4 - B1A 4NN - K5 - N4 - B1A
Weathertight
Adjustable Range
psi
2 to 8 2 to 25 3 to 50 4 to 75
Typical Dead Band psi

0.2 0.3 0.4 0.5

4L - K2 - N4 - B1A 4L - K4 - N4 - B1A 4L - K5 - N4 - B1A 4L - K45 - N4 - B1A Proof 1000 (psi)
Explosion Proof
4NN - K45 - N4 - B1A Piston 4
Overrange 750 (psi)
Standard Construction Housing: NN - aluminum; L - cast iron Switching Element: SPDT; N - 10 amps @ 250 VAC; K - 15 amps @ 250 VAC Diaphragm & O-ring: N4 - primary (wetted) diaphragm, TCP; o-ring (wetted) Buna-N Pressure Port: 1/4 NPT(F); B1A - aluminum; F1A - carbon steel
Notes 1. See balance of catalog for construction options. 2. Dead band values are expressed as typical expected at mid-range for a particular model number. See Dead Band Considerations on page 8. 3. Design and specifications subject to change without notice. For latest revision, see www.sorinc.com.
Form 216
4/32
sorinc.com 913-888-2630
Pressure and Vacuum Switches Quick Selection Guide - Pressure

6NN - K2 - N4 - F1A 6NN - K3- N4 - F1A 6NN - K5- N4 - F1A
Weathertight
Adjustable Range
psi
7 to 30 12 to 100 20 to 180 25 to 275 25 to 240 35 to 375 45 to 550 100 to 500 200 to 1000 200 to 1750 500 to 4000
Typical Dead Band psi

0.5 0.9 1.4 1.9 2.2 3.1 3.9 5.3 9.2 15 98

6L - K2 - N4 - F1A 6L - K3 - N4 - F1A 6L - K5 - N4 - F1A 6L - K45 - N4 - F1A 5L - K3 - N4 - F1A 5L - K5 - N4 - F1A 5L - K45 - N4 - F1A 9L - K4 - N4 - F1A 9L - K5 - N4 - F1A 9L - K45 - N4 - F1A 1L - K45 - N4 - F1A Proof 2500 (psi) 6000 6000
Explosion Proof
6NN - K45- N4 - F1A 5NN - K3- N4 - F1A 5NN - K5- N4 - F1A 5NN - K45- N4 - F1A 9NN - K4- N4 - F1A 9NN - K5- N4 - F1A 9NN - K45- N4 - F1A 1NN - K45- N4 - F1A Piston 6, 5 9 1
Overrange 1500 (psi) 2500 5000
Standard Construction
Housing: NN - aluminum; L - cast iron Switching Element: SPDT; K - 15 amps @ 250 VAC Diaphragm & O-ring: N4 - primary (wetted) diaphragm, TCP; o-ring (wetted) Buna-N Pressure Port: 1/4 NPT(F); B1A - aluminum; F1A - carbon steel
Quick Selection Guide - Vacuum

52NN - K116 - M4 - B1A
Weathertight
Notes 1. See balance of catalog for construction options. 2. Dead band values are expressed as typical expected at mid-range for a particular model number. See Dead Band Considerations on page 8. 3. Design and specifications subject to change without notice. For latest revision, see www.sorinc.com.
Adjustable Range
Vacuum-O-Pressure
in. Hg (in. wc)

(20 - 0 - 20) (40 - 0 - 40) 15 - 0 - 15 30 - 0 30 - 0 - 20 30 - 0 - 160
Typical Dead Band in. Hg (in. wc)

(0.8) (0.9) 0.4 0.6 0.8 1.1

52L - K116 - N4 - B1A 52L - K117 - N4 - B1A 54L - K117 - N4 - B1A 54L - K118 - N4 - B1A 56L - K216 - M2 - F1A 56L - K316 - M2 - F1A Proof 400 (psi) 1000 2500
Explosion Proof
52NN - K117 - M4 - B1A 54NN - K117 - M4 - B1A 54NN - K118 - M4 - B1A 56NN - K216 - M2 - F1A 56NN - K316 - M2 - F1A Piston 52 54 56
Overrange 200 (psi) 750 1500
Standard Construction Housing: NN - aluminum; L - cast iron Switching Element: SPDT; K - 15 amps @ 250 VAC Diaphragm & O-ring: N4 - primary (wetted) diaphragm, TCP; o-ring (wetted) Buna-N. Piston 56 primary (wetted) diaphragm, 316SS. Pressure Port: 1/4 NPT(F); B1A - aluminum; F1A - carbon steel
sorinc.com 913-888-2630
Notes 1. See balance of catalog for construction options. 2. Dead band values are expressed as typical expected at mid-range for a particular model number. See Dead Band Considerations on page 8. 3. Design and specifications subject to change without notice. For latest revision, see www.sorinc.com. Form 216
5/32
Glossary of Terms
SOR recognizes that there is no industry convention with respect to terminology and definitions pertinent to pressure switches. This glossary applies to SOR pressure switches. Pressure Switch A bi-stable electromechanical device that actuates/deactuates one or more electrical switching element(s) at a predetermined discrete pressure/vacuum (Set Point) upon rising or falling pressure/vacuum. Adjustable Range The span of pressure between upper and lower limits within which the pressure switch may be adjusted to actuate/deactuate. It is expressed for increasing pressure. Set Point That discrete pressure at which the pressure switch is adjusted to actuate/deactuate on rising or falling pressure. It must fall within the adjustable range and be called out as increasing or decreasing pressure. Dead Band The difference in pressure between the increasing Set Point and the decreasing Set Point. It is expressed as typical, which is an average with the increasing Set Point at mid-range for a pressure switch with the standard K switching element. It is normally fixed (non-adjustable). Fire-Safe The ability of a welded seal pressure sensor to contain the process at elevated temperatures up to 1200F at the rated overrange pressure, unsupported by the body of the pressure switch. Hermetically Sealed A welded steel capsule with glass-to-metal, factory-sealed electrical leads that isolates the electrical switching element(s) from the environment. Overrange The maximum input pressure that may be continuously applied to the pressure switch without causing permanent change of Set Point, leakage or material failure.
Form 216 sorinc.com 913-888-2630
Proof Pressure The maximum input pressure that may be continuously applied to the pressure switch without causing leakage or catastrophic material failure. Permanent change of Set Points may occur, or the device may be rendered inoperative. Repeatability The ability of a pressure switch to successively operate at a Set Point that is approached from a starting point in the same direction and returns to the starting point over three consecutive cycles to establish a pressure profile. Repeatability on SOR switches will be smaller than 1% of full scale per ISA/ANSI S51.1. SPDT Switching Element Single-Pole, Double Throw (SPDT) has three connections: C Common, NO Normally Open and NC Normally Closed, which allows the switching element to be electrically connected to the circuit in either NO or NC state. DPDT Switching Element DPDT is two synchronized SPDT switching elements which actuate together at increasing Set Point and deactuate together at decreasing Set Point. Discrete SPDT switching elements allow two independent circuits to be switched; i.e., one AC and one DC. The synchronization linkage is factory set, and is not field adjustable. Synchronization is verified by connecting test lamps to the switching elements and observing them go On simultaneously at actuation and Off simultaneously at deactuation.
6/32
Step 1: Piston Spring
6NN-K5-M4-C2A-YY
This table is a listing of piston-spring combinations and the corresponding adjustable ranges, dead bands, overrange and proof pressures. Adjustable range is expressed for increasing pressure; the Set Point must be within the adjustable range. Dead band is expressed as typical. See Dead Band Considerations on page 8.
Piston Spring Designators 12 - 662 12 - 6143 12 - 2 12 - 4 12 - 5 12 - 45 4-2 4-4 4-5 4 - 45 6-2 6-3 6-5 6 - 45 5-3 5-5 5 - 45 9 - 46 9-5
6 6
Adjustable Range4 psi (in. wc) (0.6 to 2.5) (2.5 to 45) 0.4 to 2.0 0.5 to 6.0 0.75 to 12 1 to 16 2 to 8 2 to 25 3 to 50 4 to 75 7 to 30 12 to 100 20 to 180 25 to 275 25 to 240 35 to 375 45 to 550 100 to 500 200 to 1000 200 to 1750 500 to 4000 bar [mbar] [1.5 to 6.2] [6.2 to 110] [30 to 140] [35 to 415] [50 to 830] [70 to 1100] [140 to 550] 0.14 to 1.7 0.2 to 3.5 0.3 to 5 0.5 to 2 0.8 to 7 1.4 to 12 1.7 to 19 1.7 to 16 2.4 to 26 3.1 to 38 7 to 35 14 to 70 14 to 120 35 to 275
Typical Dead Band1 psi (in. wc) (0.4) (0.8) 0.1 0.1 0.1 0.15 0.2 0.3 0.4 0.5 0.5 0.9 1.4 1.9 2.2 3.1 3.9 5.3 9.2 15 98 bar [mbar] [1] [2] [7] [7] [7] [10] [15] [20] [30] [35] [35] [60] [95] 0.1 0.15 0.2 0.25 0.5 0.6 1 7
Overrange psi bar psi
Proof bar
200
14
400
28
750
50
1000
70
1500
100
2500
170
2500 5000
170 340
6000 6000
410 410
9 - 45
1 - 456
1. Dead band values are expressed as typical expected at mid-range with the standard K switching element assembly installed. When optional switching elements are specified, corresponding dead band multipliers shown on pages 8 and 10 must be applied. 2. The 12/66 piston/spring combination is available with the N switching element only. 3. Adjustable range becomes 10 to 45 in. wc whenever switching elements other than K, KA, W or D are used. 4. Special ranges may be possible. Consult the factory or the SOR representative in your area.
5. Diaphragms may have an additional effect on dead band. See page 13, Note 9. 6. Diaphragm life may be limited by using T or H switching elements with Numbers 1 and 9 pistons. 7. Metric bar (mbar) values are practical equivalents of the reference English values; not necessarily exact mathematical conversions. This data appears on the product nameplate when metric engineering units are specified. 8. A breather drain (Accessory KK, see page 16) should be specified when low pressure adjustable ranges are used in environments with significant ambient temperature changes. 9. Filled isolators attached to the pressure switch will affect dead band.
sorinc.com 913-888-2630 Registered Quality System to ISO 9001 :2008
Form 216
7/32
Step 1: Piston Spring
52NN-K116-M4-C2A-YY
This table is a listing of piston spring combinations and the corresponding adjustable ranges, dead bands, overrange and proof pressures. SOR vacuum switches are compound; they will operate in either vacuum or pressure modes. Adjustable range is expressed from maximum vacuum decreasing to zero gauge and increasing to maximum pressure. Dead band is expressed as typical. See dead band considerations below. The Set Point must be within the adjustable range. A vacuum switch is generally better suited than a pressure switch for Set Points very near zero gauge.
Adjustable Range2 (Vacuum - 0 - Pressure) in. Hg (in. wc) (20 - 0 - 20) (40 - 0 - 40) 15 - 0 - 15 30 - 0 30 - 0 - 20 30 - 0 - 160 bar [mbar] [50 - 0 - 50] [100 - 0 - 100] 0.5 - 0 - 0.5 1.0 - 0 1.0 - 0 - 0.7 1.0 - 0 - 5.4 Typical Dead Band1 (Vacuum Mode) in. Hg (in. wc) (0.8) (0.9) 0.4 0.6 0.8 1.1 mbar 2 2 14 20 27 37 Overrange psi 200 750 1500 bar 14 50 100 psi 400 1000 2500 Proof bar 28 70 170
Piston Spring 52 - 116 52 - 117 54 - 117 54 - 118 56 - 2163 56 - 316

3
Notes 1. Dead band values are expressed as typical expected at mid-range with the standard K switching element assembly installed. When optional switching elements are specified, corresponding dead band multipliers shown below must be applied. 2. Special ranges may be possible. Consult the factory or the SOR representative in your area.
3. Number 56 piston is not available with a T micro switch 4. Diaphragms may have an additional effect on dead band. See page 13, Note 9. 5. Metric bar (mbar) values are practical equivalents of the reference English values; not necessarily exact mathematical conversions. This data appears on the product nameplate when metric engineering units are specified.
Dead Band Considerations

1. Dead band values are expressed as typical expected at mid-adjustable range using the standard K switching element. When optional switching elements are specified, corresponding dead band multipliers must be applied. 2. Dead bands are fixed (non-adjustable), except when T or H switching elements are used. 3. Dead band can be adjustable by selecting T or H switching element. (Diaphragm life may be limited when used with Numbers 1 and 9 pistons.) 4. Dead band multipliers must be applied to the typical dead band value shown for piston spring combination in specifications, pages 7 and 8, whenever optional switching elements other than K, KA or W are used. 5. Dead band can be widened by selecting an optional switching element with a multiplier greater than 1.0. Example: Model 6NN-G5-M4-C2A-YY Typical Dead Band 1.4 psi G-Switching Element multiplier = 3 Corrected Typical Dead Band 1.4 x 3 = 4.2 psi 6. See item #9, page 7.
Form 216
Switching Element Designators K, KA, N, W D, E, J, M, Y A, B, EF, G, JF L, YY AF, CA, EE BD, C, JJ, S EG, JG AA, BB, GG, KK LL AG T H
Dead Band Multiplier 1.0 1.5 3.0 3.5 4.0 5.0 5.5 6.0 6.5 8.5 2.5 to 6.5 1.0 to 3.0
8/32
sorinc.com 913-888-2630

General Purpose NEMA 1
Electrical: 3/4 NPT(F) - Right Material: Aluminum See Agency Listings pages 17 & 18. See Switching Element Groups 1, 2, 3 & 4 below. Electrical: 3/4 NPT(F) - Left, Right Material: Aluminum See Switching Element Groups 1, 2, 3, & 4 below.
Step 2: Housing
6NN-K5-M4-C2A-YY
Electrical: Exposed contacts Material: Aluminum Open bracket with exposed switching element-does not meet NEMA 1. See Switching Element Groups 1 & 3 below.
PP
P3
H3
Weathertight NEMA 4, 4X, IP65

Electrical: 3/4 NPT(F) - Right Material: Aluminum See Agency Listings pages 17 & 18. See Switching Element Groups 1, 2, 3 & 4 below. Electrical: 3/4 NPT(F) - Left, Right Material: Aluminum See Agency Listings pages 17 & 18. See Switching Element Groups 1, 2, 3 & 4 below. Electrical - RN: 3/4 NPT(F) - Right Electrical - RM: M20 x 1.5 - Right Six-place compression type terminal block Material: Aluminum See Agency Listings pages 17 & 18. See Switching Element Groups 1, 2, 3 & 5 below. Electrical: 3/4 NPT(F) - Right Material: Aluminum Cover: Heavy Duty with Viton gasket See Agency Listings pages 17 & 18. See Switching Element Groups 1, 2, 3 & 4 below. Electrical - RT: 3/4 NPT(F) - Right Electrical - RS: M20 x 1.5 - Right Six-place compression type terminal block Material: 316SS See Agency Listings pages 17 & 18. See Switching Element Groups 1, 2, 3 & 5 below. Electrical: 3/4 NPT(F) - Right Manual reset only Six-place compression type terminal block Material: Aluminum See Agency Listings pages 17 & 18. See Switching Element Group 6 below.
NN
N3
N4
N6
Electrical: 3/4 NPT(F) - Right Material: Carbon Steel See Switching Element Group 1 below.
RN RM
RT RS
RB
Conventional Explosion Proof

UL Listed Class I, Group C & D; Class II, Group E, F, & G; Divisions 1 & 2 as an outlet box only Electrical: 3/4 NPT(F) - Right Material: Cast Iron Weathertight with Option CG See Switching Element Groups 1, 3 below. Ul Listed Class I, Group C & D; Class II, Group E, F, & G; Divisions 1 & 2 as an outlet box only Electrical: 3/4 NPT(F) - Left, Right, Top Material: Cast Iron Weathertight with Option CG See Switching Element Groups 1, 3, 6 below. Class I, Group A, B, C, & D; Class II, Groups E, F, & G; Divisions 1 & 2 as an outlet box only Electrical: 3/4 NPT(F) - Left, Right, Top Material (Housing): Aluminum Material (Cover): Aluminum Weathertight with Option CG. See Switching Element Groups 1 & 3 below. UL Listed Class I, Groups C & D; Class II, Groups E, F & G; Divisions 1 & 2 as an outlet box only Electrical: 3/4 NPT(F) - Right Six-place compression type terminal block with Option LL Material: Copper-free aluminum Weathertight See Switching Element Groups 1, 2 & 3 below. UL Listed Class I, Groups C & D; Class II, Groups E, F & G; Divisions 1 & 2 as an outlet box only Electrical: 3/4 NPT(F)-Right, Left, Top Six-place, compression-type terminal block with Option LL Material: Copper-free aluminum Weathertight See Switching Element Groups 1, 2, 3 & 6 below. Separate electrical and set point adjustment compartments. Six-place, compression-type terminal block. Explosion Proof IIB - T4. Material: Aluminum Right hand electrical outlet: PF 3/4 (F) See Switching Element Groups 1, 2, & 3 below. Separate electrical and set point adjustment compartments. Weathertight Six-place, compression-type terminal block. UL Listed with WV option. ATEX with CL option. CSA Certified with CS option. All Listings with ML Option. See pages 17 & 18.
*L
*LC
*B3 *B4 *B5 *B6
Electrical: 3/4 NPT(F) - Left, Right Material: Aluminum Electrical: M20 x 1.5 - Left, Right Material: Aluminum Electrical: M20 x 1.5 - Left, Right Material: Cast Iron Electrical: 3/4 NPT(F) - Left, Right Material: Cast Iron
*S
*SC
Switching Element Groups 1, 2, 3 & 5 below.
*TA
*J4
*Not recommended for direct mount where vibration is expected. Housing should be securely mounted to a flat surface (bulkhead or panel rack) or pipe stanchion. **Consult the factory.
Group 1 Switching Element Group/Housing Compatibility A, AA, B, BB, BD*, C*, CA*, E, EE, G, J, JJ, K, KA, L, N, S, W, Y
Group 2 GG, KK, LL, YY
Group 3 T
Group 4 H
Group 5 AF, AG, EF, EG, JF, JG
Group 6 D, M
*BD only available with RN, RT housings. *C micro switch is not available in L, S and TA housings. *CA micro switch only available in PP, NN, N3 and N4 housings. sorinc.com 913-888-2630 Registered Quality System to ISO 9001 :2008
Form 216
9/32

Switching Element Service Normal Service AC Electrical Contact Type Electrical Connection Type AC Rating Volts 250 Amps 15 1 1 15 11 15 5 15 Volts 125 125 125 125 125 125
Step 3: Switching Element
6NN-K5-M4-C2A-YY
DC Rating Resistive Amps 0.4* 0.5 0.5* 0.5 0.5* 0.5 1.5 125 250 250 250 250 250 250 10 5 5 5 10 15 15 125 125 125 125 125 Minimum Maximum
Dead Band Multiplier SPDT 1.0 1.0 1.5 3.0 3.0 3.5 1.5 5.0 DPDT 6.0 5.0 6.0 6.0 6.5 4.0 -
Designator SPDT K KA J G A L E C DPDT KK JJ GG AA LL EE -
Volts 30 28 30 30 30 30 -
Amps 5.0* 1.0* 1.0 5.0 10* 5.0* -
Single Switching Element SPDT - (1) SPDT Double Switching Element DPDT - (2) SPDT Synchronized actuation/deactuation at increasing/decreasing set points.
Wide Dead Band AC AC or DC Wide Dead Band DC Narrow Dead Band DC Very Wide Dead Band DC Very HighCapacity DC Magnetic Blow-Out Hi-Ambient Temperature Rating - 400F Low Pressure Service 12-66 only Wide Adjustable Dead Band Narrow Adjustable Dead Band Manual Reset Decreasing Pressure (Automatic Actuation Increasing Pressure) Manual Reset Increasing Pressure (Automatic Actuation Decreasing Pressure) Hermetically Sealed Switching Element Hermetically Sealed Gold Contacts FM-Approved Service Only Explosion Proof EEx d IIC T6 (SW Only)
K, KA, G, L, C, N, S, Y, W Switching Elements - Screw Terminals. All other Switching Elements _ 18 18 AWG Color-Coded Wire Leads except when terminal blocks are specified. T & H Switching Elements - Consult Factory.
Low Power Gold Contacts
125 125 250 250 250 250 250
10.0 0.3 0.5* 0.3* 0.4* -
5.0 3.0 1.5 1.0 1.0 2.5 to 6.5 1.0 to 3.0
6.0 3.5 -
S B Y W N T H
BB YY -
D 250 15 125 0.5 1.5 M 250 250 125 250 250 11 5.0 1.0 22 7.0 125 125 125 250 0.5* 0.5* 0.5 0.25 30 30 30 30 5.0 5.0* 1.0 7.0 4.0 3.0 3.0 4.0 5.0 8.5 5.5 5.5 AF EF JF CA BD
AG EG JG -
Cross reference compatibility chart on page 9 to ensure that switching element will fit in housing. Review notes on page 11 for more details.
Form 216
10/32
sorinc.com 913-888-2630

Notes 1. Double switching elements have wire leads except when supplied in housings RB, RM, RN, RS, RT, B3, B4, B5, B6 and J4. Terminal blocks are standard in these housings. 2. Dead band multipliers must be applied to the typical dead band figures given in the specification tables on pages 7 and 8. 3. Switching element ambient temperature limits: -65 to 400oF -65 to 250oF -40 to 167oF -13 to 158oF -65 to 180oF (-54 to 204oC) (-54 to 120oC) (-40 to 75oC) (-25 to 70oC) (-54 to 80oC) B, Y, W A, E, & J AF, AG, EF, EG, JF, JG BD All others
Step 3: Switching Element
6NN-K5-M4-C2A-YY
5. Switching elements W, & Y have Elgiloy springs. 6. Certain switching elements are capable of handling greater voltage and/or amperage. Consult the factory should your requirements exceed catalog values. All switching elements above except BD are UL Recognized and CSA Certified. The DC current ratings marked with an asterisk (*) are not UL Listed but have been verified by testing and/or experience. 7. Ambient temperature is reduced to 200F (93C) for J, JJ, A, AA, E, EE, B, BB, Y, YY, & W switching elements when CV accessory is selected.
4. The hermetically sealed switching element capsule is ATEX Approved, UL Listed, CSA Certified and TestSafe Approved as an explosionproof snap switch according to the following table with conditions and exceptions specified in Note 3.
Agency UL Listed CSA Certified TestSafe Approved ATEX Approved Hazardous Location Conditions Class I, Groups A, B, C, & D Class I, Groups E, F & G; Divisions 1 & 2 Ex s IIC T6 IP65 Class I, Zone I DIP T6 IP65 II 2 G EEx m II Designator AF, EF, AG, EG, JF, JG AF, EF, AG, EG AF, EF, AG, EG, JF, JG
Caution: The switching element assembly has been precisely positioned in the housing at the factory for optimum performance. Any inadvertent movement or replacement in the field will degrade performance, could render the device inoperative, and can void the warranty unless factory authorized procedures are followed.
Form 216
11/32

Notes 1. N4 diaphragm system is standard, but requires a designator in the model number. It is normally suitable for air, oil, water and noncorrosive processes. M2 diaphragm system is standard on Number 56 vacuum switches. (See notes 10 & 13.) 2. U7 designates a welded flush-type diaphragm. Available only in 1 NPT(M) 316SS on Numbers 5 & 6 pistons with K switching element. See page 15. 3. U8 designates the welded fire-safe diaphragm system. 316SS is stocked. Not available on Number 1 piston or vacuum switches. Example: U8-C2A is a 316SS fire-safe welded diaphragm system. See page 15. 4. U9 designates a welded diaphragm system. Not available on vacuum switches. Example: U9-A1A is a Monel welded diaphragm system. See page 15. 5. Other diaphragm and o-ring combinations may be available. Consult the factory or the SOR representative in your area for more information. 6. Wetted parts have been selected as representing the most suitable commercially available material for use in the service intended. However, they do not constitute a guarantee against corrosion or permeation, since processes vary from plant to plant and concentration of harmful fluids, gases or solids vary from time to time in a given process. Empirical experience by users should be the final guide. Alternate materials are generally available.
Step 4: Diaphragm & O-Ring
6NN-K5-M4-C2A-YY
O-Ring (Wetted)
Viton Kalrez* Viton Kalrez* Viton Kalrez* Viton Kalrez* Viton GLT Buna-N Viton Neoprene Kalrez* Aflas EPR Viton Buna-N Buna-N Kalrez* Kalrez* EPR Aflas Buna-N Neoprene Viton Kalrez TCP Teflon-Coated Polyimide Buna-N Neoprene Viton TCP Teflon-Coated Polyimide 316L SS
Diaphragm (Wetted Primary)

Monel Hastelloy-B Hastelloy-C Carpenter-20
Designator
A4 A6 H4 H6 J4 J6 L4 L6 M1 M2 M4 M5 M7 M8
(See Note 11) (See Note 13) (See Note 7)
M9 N1
N3
(See Notes 1 & 13) (See Note 13)
N4 Standard N5 N6
N7
N8 P1
R1 S1 S2 W2 W4 W5 W6 Y1 U7
(Continued on page 13.)
Viton GLT Buna-N Viton Neoprene Kalrez* EPR None None None
Tantalum (See Note 10)
EPR Welded Fire-Safe Welded Welded
U8
U9
*Kalrez or equivalent Perfluoroelastomer (FFKM) o-rings
Form 216
12/32
sorinc.com 913-888-2630

7. N3 diaphragm system utilizes a durable back-up diaphragm for high cycle-rate, high shock applications where Buna-N and TCP are compatible with the process. Consult factory if process temperatures are well below freezing. 8. This table shows allowable minimum and maximum temperatures for o-rings. Consult the factory for temperatures down to 65F on fire- safe and welded metal diaphragm systems.
O-Ring Material Viton Viton GLT Kalrez* Aflas Buna-N Neoprene EPR Fire-Safe/Welded Diaphragm System TCP Teflon-Coated Polyimide Diaphragm F 32 to 400 -20 to 400 5 to 400 25 to 400 -30 to 200 -30 to 400 -30 to 400 C 0 to 204 -29 to 204 -15 to 204 -4 to 204 -34 to 93 -34 to 204 -34 to 204
Step 4: Diaphragm & O-Ring
6NN-K5-M4-C2A-YY
9. Dead bands are slightly higher when using H, J, N3, N6, U or W series diaphragm options. Consult the factory. 10. Diaphragm systems N1, N3, N4, N5, N6, N7, N8, P1, R1, S1, S2, W2, W4, W5, W6, Y1, U8, U9 are not available on Number 56 vacuum switches. 11. M9 diaphragm system is suggested for steam applications up to 400F. 12. If Kalrez, EPR or Viton is selected for high temperature process media or ambient temperature requirements, the A, B, E, J, W or Y switching elements are suggested with reference to the table in Note 3, page 11. 13. Only diaphragm systems N1, N4, N5, N7, N8 and P1 are available on the 12-66 piston spring combination.
*Kalrez or equivalent Perfluoroelastomer (FFKM) o-rings
Form 216
13/32

Piston Process Connection Size
Aluminum Series 2000 Wrought 356 or 360 Casting Carbon Steel Ledloy Wrought or WCB Casting
Step 5: Pressure Port
6NN-K5-M4-C2A-YY
12, 4 52, 54 6, 5, 9 1, 56 12, 4 52, 54 6, 5, 9 1, 56 6, 5, 9 1, 56
3/4 NPT(M)
4, 54
12, 52
12, 52
2 NPT(F) 1/4 NPT(F) Flushing Port
1/4 NPT(F)
1/2 NPT(F)
1 NPT(M)
1 NPT(F)
(Standard)
B1A
B2A
(Standard)
F1A
F2A C2A
F3A
Pressure Port Material
316SS/316LSS Wrought or CF-8M Casting 347 Stainless Steel Wrought or CF-8C Casting Carpenter 20 Stainless Steel Wrought or CF-7M Casting Brass (See Note 6) Half Hard Yellow Wrought or Silicon Brass Casting Hastelloy-B Hastelloy-C Monel
C1A
C3A
C4A*
C5A
C6A
E1A
E2A
E3A
L1A
L2A
L3A Consult factory availability of pressure port material and process connection size.
D1A H1A J1A A1A
D2A H2A J2A A2A
D3A H3A J3A A3A
*C4A only available with Pistons 5 & 6 when U7 diaphragm is specified. See page 15.
Notes 1. Select designators for material and connection size. Large bold-face letters denote those items generally available from stock. Small light-face letters denote items with limited stock and possible long delivery. 2. 1/4 and 1/2 tapered BSP(F) pressure ports are available. Consult factory. 3. Combinations are possible when a particular connection size is not available for the range (piston spring) desired. For example, if 2 NPT(F) is desired for a Number 4 piston, the Number 12 pressure port can be supplied. The piston would be designated as Number 124 and the overrange and proof pressures for Number 12 apply. Note: 124, 125 and 126 are the only available combinations. 4. Many other materials such as PVC, Kynar, etc., are available. Denote materials not shown by specifying an X followed by the required connection size, and describe the material.
Form 216
Examples: X2A = PVC pressure port with 1/2 NPT(F) connection. X1A = Titanium pressure port with 1/4 NPT(F) connection. Non-metal pressure ports generally reduce proof pressure and may reduce overrange pressure. The pressure port material may limit the process temperature. Delivery may be longer than normal. 5. Raised-face and flat-face flanges to match ASA 150 and ASA 300 lb. in commercially available materials can be supplied on Series 12 and 4 pistons by adding an X suffix to the model numbers and specifying X - (size) inch (material) (raised- or flat-) face flange to match ASA (rating) lb. 6. Brass not available on Piston Numbers 9 and 1. 7. 1/4 NPT(F) Flushing Port standard on C6A pressure ports.
See next page for presentation of welded diaphragm and FM Approved fire-safe systems.
14/32
Registered Quality System to ISO 9001 :2008 sorinc.com 913-888-2630

Designator Description
Welded Diaphragm & Fire-Safe Systems
U7
Process Connection
Process Face
Welded Flush-Type Diaphragm System A metal diaphragm is welded to the process face of the pressure port, thereby, eliminating the o-ring. This arrangement may be indicated for viscous or slurry process where cleanliness is required or where process build-up and clogging is unacceptable. The pressure port designator determines the material: Only 1 NPT(M) 316SS is available. Example: U7-C4A U7 = 316SS welded flush-type diaphragm C4A = 1 NPT(M) 316SS pressure port Note: U7 is limited to Numbers 5 and 6 pistons and the K switching element. Not available on vacuum switches. Fire-Safe Welded Diaphragm System Factory Mutual System Approved - U.S Patent Number 4,438,305 Tested in flames at 1900oF for periods up to 30 minutes while pressurized to the rated overrange pressure. A metal diaphragm, the cylinder disc and the pressure port are welded as a unit, thereby, eliminating the o-ring. This arrangement may be indicated for extremely corrosive, hot, harsh or volatile process where o-rings are not suitable. See firesafe definition on page 6. 316SS is stocked. Hastelloy B and C, Monel and Titanium are available, but may require a longer lead time. The pressure port designator determines the material. Example: U8-C2A U8 = Fire-safe welded diaphragm system C2A = 1/2 NPT(F) 316SS pressure port Note: 1/2 NPT(F) is stocked; 1/4 NPT(F) is not stocked and has a longer lead time. Not available on Number 1 piston and vacuum switches. Welded Diaphragm System A metal diaphragm is welded to the pressure port, thereby, eliminating the o-ring. This arrangement may be indicated for extremely corrosive, hot or harsh process where o-rings are not suitable. 316SS is stocked. Hastelloy B and C, Monel and Titanium are available, but may require a longer lead time. The pressure port designator determines the material. Example: U9 - A2A U9 = Monel welded diaphragm A2A = 1/2 NPT(F) Monel pressure port Note: Not available on vacuum switches.
U8
Piston Shaft
Spring Stop Cylinder Disc
Diaphragm
Pressure Port
U9
Diaphragm
Pressure Port
Two-inch Pressure Port The wide pressure port minimizes the possibility of clogging when the process media is sludgy or viscous. See page 20 for dimensions. A 2 NPT(F) pressure port with a 1/4 NPT(F) flushing port can be supplied with a welded diaphragm, or with a conventional diaphragm and o-ring combination.
C6A
15/32

Accessory/Option & Description
Wetted parts are cleaned for industrial oxygen service. ATEX Approved pressure/vacuum switch. See Agency Listings on page 18 for details.
Step 6: Accessories
6NN-K5-M4-C2A-YY
Designator
BB CL CS CG CV GC GG HB HBME HT KK LL ML MM NC* PB PK PP PY RR SB SP TB TT VV WV X YY ZZ
CSA Certified pressure/vacuum switch. Available with PP, NN, RB, RN, RT, B3 and B6. Housing has earth (ground) lug. See Agency Listings on page 17 & 18 for details. Neoprene cover gasket (o-ring) to make L, S and TA explosion-proof housings weathertight. Canadian Registration Number (CRN) - Process ratings may be affected. Consult the factory for details. Cemented cover gasket on weathertight housings. Sealed electrical lead adapter. Provides protection to housing interior, switching element and dry side of pressure sensing assembly from condensate in the electrical conduit and corrosive atmospheres. (Protrudes approximately 2 from housing.) Universal terminal box. Stainless steel, 1/2 NPT(F). ATEX Approved EEx d IIC T4, T5 & T6. Universal terminal box. Stainless steel, M20 x 1.5(F). ATEX Approved EEx d IIC T4, T5 & T6. Universal terminal box. Stainless steel, 1/2 NPT(F). FM Approved and CSA Certified. Explosion Proof Class I, Groups A, B, C, & D; Class II, Groups E, F & G; Class III; Divisions 1 & 2 (NEMA 4X IP65) Breather Drain Crouse Hinds ECD-15 for Hazardous Locations Class I, Groups C & D, Class II, Groups E, F & G; on S or SC housings only. Sintered metal plug in weathertight housing. Terminal block. 6-place compression type standard in B and R series housings. Optional in LC and SC housings. 6-place screw type standard in J4 housing. Multi-Listed pressure/vacuum switch. ATEX, CSA & UL. Available with B3 & B6 housings. See Agency Listings on Pages 17 & 18 for details. Vacuum protector plate. Retains diaphragm in pressure switch if subjected to vacuum greater than 10 in. Hg. If a pressure switch is subjected to continuous, rapid changes of vacuum, other protection may be available (consult factory). Material matches or exceeds pressure port material. N/A on Pistons 52, 54, or 56. Compliance to NACE Certification MR0175/ISO 15156. Carbon steel body with stainless steel adjusting nut. Pipe (stanchion) mounting kit for (1-1/2 to 2 pipe). Tag, fiber. Attached with plastic wire to housing. Stamped with customer-specified tagging information. Powder coat epoxy coating. No coating on stainless steel parts or plated screws. (500 hours-salt spray) Tag, stainless steel. Attached with stainless steel wire to housing. Stamped with customer-specified tagging information. (2 lines, 18 characters and spaces per line.) Stainless steel body and adjusting nut for corrosive environments. Stainless steel piston and cylinder disc for corrosion resistance. Explosion-proof weathertight electrical junction box with screw terminals. Aluminum 3/4 NPT(F) top or right conduit connections as required. UL Listed and CSA Certified Class I, Groups A, B, C & D; Class II, Groups E, F & G; Divisions 1 & 2. (L, LC, S, SC and TA housing.) Includes cover o-ring for weathertight applications. Oversize stainless steel nameplate or separate stainless steel tag. Permanently attached to housing. Stamped with customer-specified tagging information. Fungicidal varnish. Covers exterior and interior except working parts. UL Listed pressure vacuum switch. Available with B3 and B6 housings. See Agency Listings on page 17 & 18 for details. X is used as a suffix to the model number for special requirements not keyed elsewhere in the model number by an X. Each X must by completely identified in the text of the order or inquiry. When more than one X is required, use X followed by the number of such items. For example, X3 means three separate otherwise unidentifiable requirements. Epoxy coating. Exterior only. Polyimide epoxy with 316SS pigment. (200 hours-salt spray) Chained cover with captive screws to conform to former JIC specification.
Note: See pages 17 & 18 for Agency Approved, Certified or Listed Accessories Options. Representative Information Only: A slash and a three-digit number (/000) appearing after the last Accessory designator letter in the model number denotes special administrative procedures with respect to factory representatives. It is not part of the model number and is used only by the factory or a factory representative. *Consult the factory for materials other than 316/316L.
Form 216
16/32
sorinc.com 913-888-2630

Certificates Calibration Hydrostatic Pressure Test Inspection Report Compliance / Conformance Dielectric Test Insulation Resistance Typical Material of Wetted Parts C1 C2 C3 C4 C5 C6 C8 B1 B4 B5 B6 B7 A1 A2
Test Certificates
A3 A4 A5 A6 A7 A8
Agency Listings
UL For Hazardous Locations Class I, Groups B, C, & D; Class II, Groups E, F, & G; Divisions 1 & 2 Piston Housing Switching Element A, AA, AF, AG, B, BB, C, E, EE, EF, EG, G, GG, H, J, JF, JG, JJ, K, KA, KK, L, LL, N, P, S, T, W, Y, YY Spring Diaphragm & O-Ring Pressure Port Material & Connection Size Accessories WV or ML Required ALL ALL ALL All except CG, GC, GG, HB, HT, KK, LL, ME, TB, ZZ
ALL
B3, B6
CSA
For Hazardous Locations Class I, Groups B, C, & D; Class II, Groups E, F, & G; Divisions 1 & 2 Piston Housing Switching Element A, AA, AF, AG, B, BB, C, E, EE, EF, EG, G, GG, H, J, JF, JG, JJ, K, KA, KK, L, LL, N, P, S, T, W, Y, YY Spring Diaphragm & O-Ring Pressure Port Material & Connection Size Accessories CS or ML Required ALL ALL ALL All except CG, GC, GG, HB, HT, KK, LL, ME, TB, ZZ
ALL
B3, B6
General Purpose and Weathertight (CSA Enclosure Type 4) Piston Housing PP (General Purpose) NN (Type 4) ALL RN, RT (Type 4) Switching Element A, AA, B, BB, C, E, EE, G, GG, GA, H, J, JJ, JL, K, KK, KA, L, LL, N, S, T, W, Y, YY A, AA, AF, AG, B, BB, C, E, EE, EF, EG, G, GG, GA, J, JJ, JL, JF, JG, K, KK, KA, L, LL, N, S, T, W, Y, YY D, DA, M (Manual Reset only)
Form 216 Registered Quality System to ISO 9001 :2008
Spring
Diaphragm & O-Ring
Pressure Port Material & Connection Size
Accessories
CS Required
ALL
ALL
ALL All except GC, LL
RB, RH (Type 4)
sorinc.com 913-888-2630
17/32

TIIS For Hazardous Locations Rating: Explosion Proof Class IIBT4 Piston Housing Switching Element A, AA, B, BB, C, E, EE, G, GG, GA, H, J, JJ, JL, K, KK, KL, L, LL, N, S, T, W, WW, Y, YY Spring Diaphragm & O-Ring
Agency Listings
Pressure Port Material & Accessories Connection Size BB, MM, NN, PB, PC, PK, PP, RR, SB, TT, W, YY, X
1, 4, 5, 6, 9, 12, 52, 54, 56 FM
J4
ALL
ALL
ALL
Pressure Supervisory Switches for Fuel Gas/Fuel Oil, and Ventilating or Combustion Air Piston Housing
PP (NEMA 1) 1, 4, 5, 6, 9, 12 NN, N3, N4 (NEMA 4) CA 2, 3, 4, 5, 45, 614
Switching Element
Spring
Diaphragm & O-Ring

M2, M4, M5, N1, N3, N4, N5, N6, P1, R1, S1 U9, W2, W4, W5, W6, Y1
Pressure Port Material & Accessories Connection Size

ALL ALL Thread Type: A, B KK (PP Housing only) BB, MM, GG, PP, RR, SS, TT, VV, YY, ZZ
Airflow Interlocking Switches for Ventilating or Combustion Air Piston Housing Switching Element
N (12 Piston only) C, EE, G, K, L, S, T, W
Spring
66 (N switch) 2, 4, 5, 45, 614
Diaphragm & O-Ring
Pressure Port Material & Accessories Connection Size

B1A, B2A PP, RR, SS (SS same as TT)
4, 12
PF (NEMA 1)
P1
ATEX
EEx d IIC T6 Piston Housing Switching Element Spring Diaphragm & O-Ring Pressure Port Material & Accessories Connection Size
CL (for all Hsgs) or ML (for B3/ B6 Hsgs) Required All except CG, GC, GG, HB, HT, KK, LL, ME, TB, ZZ
ALL
B3, B4, B5, B6
A, AA, AF, AG, B, BB, C, E, EE, EF, EG, G, GG, H, J, JF, JG, JJ, K, KA, KK, L, LL, N, P, S, T, W, Y, YY
ALL
ALL
ALL
Ex ia IIC T6...T4 Gb
ALL RN, RM, RT, RS J, JJ, JF, JG ALL ALL ALL CL
Form 216
18/32
sorinc.com 913-888-2630

Manual Reset Button
Manual Reset
RB - Weathertight
S - Explosion Proof
SOR Pressure Switches in this catalog may be specified with manual reset electrical switching elements D or M. D actuates automatically on increasing pressure. M actuates automatically on decreasing pressure. Depress the button to manually reset. Housings must be RB (weathertight) or S (explosion proof) because of the requirement of a hub for the manual reset assembly. Refer to page 3 for How to Order instructions.
Weights
Housing
H3 NN, N3, N4, PF, PP, P3 RB, RM, RN N6 LC, SC L, S TA B3, B4, J4, RT, RS B5, B6
Weight (lbs)
1.5 2 2.5 3 4 5 6 8 10
(kgs)
0.75 1 1.25 1.5 2 2.5 3 4 5
Actual shipping weights may vary from the charted values because of product material, configuration and packaging requirements. Note PK Pipe Kit adds approximately 1.5 lbs. (0.7 kgs). TB Junction box adds approximately 5 lbs (2.25 kgs).
Dimensions
Dimensions in this catalog are for reference only. They may be changed without notice. Contact the factory for certified drawings for a particular model number. Notes 1. Dimensions in this catalog are expressed as millimeters over inches (Linear = mm/in.). 2. Dimensions marked with an asterisk (*) on housing dimension drawings (pages 20 through 31) vary with respect to process connection size. The chart below lists these dimension variances. 3. Electrical Connection Size: 3/4 NPT(F) standard. 1/2 NPT(F), 1/2 NPT(M), M20 x 1.5, PG 13.5, PF 3/4 optional. Consult the factory for compatibility with selected housing or agency listing.
Process Connection Size
1/4 NPT(F) 1/2 NPT(F) 3/4 NPT(M) 1 NPT(F) 1 NPT(M) 2 NPT(F) Length A 1/4 NPT(M) Length A 1/2 NPT(M)
Piston Number
12, 52 Shown Shown Add 5.6 0.22 Add 25.4 1.00 Add 29.7 1.17 Add 38.9 1.52 4, 54 Shown Shown Add 46.0 1.81 Add 29.7 1.17 Add 38.9 1.52 6, 5, 9, 1, 56 Shown Add 13.2 0.52 Add 23.1 0.91 Add 29.7 1.17 Add 38.9 1.52
Form 216
19/32
Dimensions
Dimensions in this catalog are for reference only. They may be changed without notice. Contact the factory for certified drawings for a particular model number.
Drawing 0091354
See description on page 15.
Wide Pressure Port: C6A
Drawing 0090300
Drawing 0091353
Pipe Mounting Kit: PK

Form 216
Junction Box with Terminal Block: TB

sorinc.com 913-888-2630
20/32
Dimensions
Weathertight - NEMA 4, 4X, IP65

MODEL #
MODEL # SALES ORDER # LINE ITEM # PURCHASE ORDER # SALES PAGE
1
SALES ORDER #
LINE ITEM #
PURCHASE ORDER #
108.1 4.25 52.4 2.06 69.9 2.75 33.3 1.31 19.3 0.76 **56.5 2.22 28.6 1.13 26.1 1.03 18.7 0.73 PROCESS CONNECTION SIZE 1/4 NPTM SHOWN 1/2 NPTM ELECTRICAL CONNECTION 3/4 NPTF STD 1/2 NPTF OPT M20 X 1.5 F OPT (BOTH SIDES ON N3 & P3 HSGS) *149.5 5.89 40.5 1.59 HOUSING GROUP NN & N3 N4 PP & P3 PROCESS CONNECTION SIZE 1/4 NPTF *150.9 5.94 NPTF 1/2 1 NPTF 2 NPTF SEE DETAIL PROCESS CONNECTION LENGTH A 29.7 1.17 38.9 1.53 ** DIMENSION SHOWN 4.6 0.18 1.5 SUBTRACT 0.06 ADD * LENGTH SHOWN SHOWN ADD 5.6 0.22 25.4 ADD 1.00
108.1 4.25 52.4 2.06 69.9 2.75 33.3 1.31 **56.5 2.22 28.6 1.13 26.1 1.03 PROCESS CONNECTION SIZE 1/4 NPTM SHOWN 1/2 NPTM HOUSING GROUP NN & N3 ELECTRICAL CONNECTION 3/4 NPTF STD 1/2 NPTF OPT M20 X 1.5 F OPT (BOTH SIDES ON N3 & P3 HSGS) N4 PP & P3 40.5 1.59 PROCESS CONNECTION SIZE 1/4 NPTF 1/2 NPTF 1 NPTM SEE DETAIL 6.4 0.25 63.5 MIN 2.5 76.2 TO MAX MOUNTING HOLES 3.00 CLEARANCE SLOTS FOR HARDWARE WITH
DETAIL 1 NPTM PROCESS CONNECTION SCALE 0.3
CLEARANCE SLOTS FOR *57.4 2.26 HARDWARE WITH
63.5 MIN 2.5 76.2 TO MAX MOUNTING HOLES 3.00
6.4 0.25
A
1/4 OR 1/2 NPTM PROCESS CONNECTION OPTIONAL
ISO-9001
14685 W 105TH ST LENEXA, KS 66215 USA 913-888-2630 *58.7 SORINC.COM
ISO-9001
14685 W 105TH ST LEN 913-888SORINC.C
2.31
DRAWN BY
7.1 0.28
PRODUCT CERTIFICATION DRAWING ALL DIMENSIONS ARE 1/16 IN UNLESS OTHERWISE SPECIFIED MM LINEAR = IN
K MITCHELL
CHECKED BY
J REHM
ENGINEER APPROVAL
S BOAL
DATE
PRODUCT CERTIFICATION DRAWIN ALL DIMENSIONS ARE 1/16 IN UNLESS OTHERWISE SPECIFIED MM LINEAR = IN
10 OCT 2011
THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SOR. NO USE WHATSOEVER OF THE INFORMATION CONTAINED HEREON, NOR REPRODUCTION IN WHOLE OR PART MAY BE MADE WITHOUT THE EXPRESS WRITTEN PERMISSION OF SOR.
THIS DRAWING IS THE EXCLUSIVE PRO NO USE WHATSOEVER OF THE INFORMA HEREON, NOR REPRODUCTION IN WHOL MADE WITHOUT THE EXPRESS WRITTEN P
TITLE
1/4 NPTF FLUSHING PORT
TITLE
DIMENSION DRAWING 12/52 NN/N3/N4/PP/P3
DETAIL 2 NPTF PROCESS CONNECTION SCALE 0.38
EO NUMBER: 5123 SCALE: 0.75

DO NOT SCALE PRINT
DRAWING NUMBER
REV
0090100 SHEET 1 OF 1
15
DWG SIZE
DIMENSION DRAWING 4/54 NN, N3, N4, PP & P3
PROCESS CONNECTION
7.1 0.28

DO NOT SCALE PRINT
DRAWING NUMBE
009 SHEET
Model Name: 0090100.ASSEM/15/0+
Drawing 0090100
Drawing 0090110
Reset Form
Designators: NN, N3, N4, PP, PF, P3 Piston Numbers 12, 52 Housings PP, P3 and PF are General Purpose. (Cover gasket is not installed.)
MODEL # SALES ORDER #
Designators: NN, N3, N4, PP, PF, P3 Piston Numbers 4, 54 Housings PP, P3 and PF are General Purpose. (Cover gasket is not installed.)
SALES PAGE LINE ITEM # PURCHASE ORDER #
1
108.1 4.25 52.4 2.06 69.9 2.75 33.3 1.31 **56.5 2.22 28.6 1.13 26.1 1.03 PROCESS CONNECTION SIZE 1/4 NPTM SHOWN 1/2 NPTM HOUSING GROUP NN & N3 ELECTRICAL CONNECTION 3/4 NPTF STD 1/2 NPTF OPT M20 X 1.5 F OPT (BOTH SIDES ON N3 & P3 HSGS) 40.5 1.59 N4 PP & P3 PROCESS CONN SIZE 1/4 NPTF *146.8 5.78 1/2 NPTF 9/16 SAE 3/4 NPTM CLEARANCE SLOTS FOR *54.7 2.15 HARDWARE WITH TO 6.4 0.25 63.5 MIN 2.5
LENGTH A 29.7 1.17 38.9 1.53
** DIMENSION SHOWN 4.6 0.18 1.5 0.06 * LENGTH * LENGTH 1, 5, 6, 9, 56 2, 3 14.0 SHOWN ADD 0.55 24.1 13.2 ADD ADD 0.95 0.52 14.0 N/A ADD 0.55 23.1 ADD N/A 0.91 ADD SUBTRACT
7.1 0.28
ISO-9001
14685 W 105TH ST LENEXA, KS 66215 USA 913-888-2630 SORINC.COM

DRAWN BY
76.2 MAX MOUNTING HOLES 3.00
K MITCHELL
CHECKED BY
J REHM
ENGINEER APPROVAL
S BOAL
DATE
10 OCT 2011
A
TITLE
Drawing 0090120
Model Name: 0090120.ASSEM/20/1
DIMENSION DRAWING 1/2/3/5/6/9/56 NN/N3/N4/PP/P3
PROCESS CONNECTION

DO NOT SCALE PRINT
DRAWING NUMBER
REV
0090120 SHEET 1 OF 1
21
DWG SIZE
Designators: NN, N3, N4, PP, PF, P3 Piston Numbers 5, 6, 1, 9, 56 Housing PP, P3 and PF are General Purpose. (Cover gasket is not installed.)
*Refer to Dimensions table on page 19 for changes in length due to process connection size, including A dimension.
Reset Form
Form 216
21/32
Dimensions
SALES PAGE MODEL # SALES ORDER # LINE ITEM # PURCHASE ORDER #
1
107.3 4.22 52.0 2.05 69.9 2.75 33.3 1.31

MODEL # SALES ORDER # LINE ITEM # PURCHASE ORDER #
SALE
10.1 0.40 28.6 1.12
65.6 2.58
18.7 0.74
107.3 4.22 HOUSING 69.9
ELECTRICAL 52.0 CONNECTION

2.05
65.6 2.58 28.6 1.12 26.2 1.03 HOUSING RL RM RN RS 40.5 1.59 RT 95.3 3.75
RL 2.75 26.2 1.03 RM RN
33.3 1.31
3/4 NPTF STD 1/2 NPTF OPT LH & RH M20 X 1.5 F RH ONLY 3/4 NPTF STD 1/2 NPTF OPT RH ONLY M20 X 1.5 F RH ONLY 3/4 NPTF STD 1/2 NPTF OPT RH ONLY 3/4 NPTF STD 1/2 NPTF OPT LH & RH M20 X 1.5 F CLEARANCE SLOTS LH & RH 6.4
FOR
ELECTR CONNE
3/4 NPT 1/2 NPT LH &
ELECTRICAL CONNECTION SEE CHART
1/4 NPTF FLUSHING PORT DETAIL 2 NPTF *175.9 PROCESS CONNECTION 6.92 SCALE 0.5 40.5 1.59
RS RT
ELECTRICAL CONNECTION SEE CHART 50.8 2.00
DETAIL 1 NPTM PROCESS CONNECTION SCALE 0.3
M20 X RH O
3/4 NPT 1/2 NPT RH O
M20 X RH O
*174.5 6.87
RU RW
*58.7 2.31
28.6 1.13 71.4 2.81
3/4 NPT 1/2 NPT RH O
RU RW RY
CLEARANCE SLOTS 6.4 FOR HARDWARE 0.25 *57.4 2.26 63.5 MIN 2.50 76.2 TO MAX 3.00 WITH PROCESS CONN SIZE 1/4 NPTF A 1/2 NPTF A 1/4 OR 1/2 NPTM PROCESS CONNECTION OPTIONAL PROCESS CONNECTION 1 NPTF 2 NPTF SEE DETAIL 7.1 0.28
3/4 NPT 1/2 NPT LH &
RY
M20 X 1.5 F 63.5 LH & RH WITH 2.5 MIN

76.2 7.1 0.28 PROCESS CONNECTION
0.25
HARDWARE
M20 X LH &
* LENGTH SHOWN SHOWN ADD 5.6 0.22 25.4 ADD 1.00
TO 14685 W 105TH ST LENEXA, KS 66215 USA MAX 3.00 913-888-2630 MOUNTING HOLES SORINC.COM ISO-9001
DRAWN BY
M20 X LH &
MOUNTING CENTERS
PRODUCT CERTIFICATION DRAWING ALL DIMENSIONS ARE 1/16 IN UNLESS OTHERWISE SPECIFIED 37.2 MM 1.47 LINEAR = IN
1/4 K MITCHELLOR 1/2 NPTM

CHECKED BY
PIPE KIT OPTIONAL
14685 W 105TH ST LENEXA, 913-888-2630 SORINC.COM ISO-9001 PRODUCT CERTIFICATION DRAWING ALL DIMENSIONS ARE 1/16 IN UNLESS OTHERWISE SPECIFIED MM LINEAR = IN
OPTIONAL M SMITH
ENGINEER APPROVAL
PROCESS CONNECTION
S BOAL
DATE
PROCESS CONN SIZE 1/4 NPTF 1/2 NPTF 1 NPTM PROCESS CONN SIZE 1/4 NPTM SHOWN
* LENGTH SHOWN ADD 46.0 1.81
71.4 2.81
03 JUN 2011
THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SOR. 133.4 NO USE WHATSOEVER OF THE INFORMATION CONTAINED HEREON, NOR5.25 REPRODUCTION IN WHOLE OR PART MAY BE MADE WITHOUT THE EXPRESS WRITTEN PERMISSION OF SOR.
TITLE
THIS DRAWING IS THE EXCLUSIVE PROPERTY NO USE WHATSOEVER OF THE INFORMATION HEREON, NOR REPRODUCTION IN WHOLE OR P MADE WITHOUT THE EXPRESS WRITTEN PERMIS
TITLE
LENGTH A CLEARANCE FOR 9.7#12/52 DIM DWG 1/4 NPTM SHOWN

MOUNTING HARDWARE 29.7 EO NUMBER: 5090 1.17 SCALE: 0.75 38.9 1/2 NPTM 0090246.ASSEM/9/0 Model Name: DO NOT SCALE PRINT 1.53
R-SERIES
LENGTH A 29.7 1.17 38.9 1.53
0.31
DIMENSION DRAWING 4/54 R - SERIES W/PIPE KIT OPTION EO NUMBER: 5123 SCALE: 0.69
DO NOT SCALE PRINT DRAWING NUMBER
DRAWING NUMBER
REV
Housing RN, RT, RM, RS
Electrical Connection 3/4 NPT(F) M20 x 1.5
0090247 SHEET 1 OF 1
6
DWG SIZE
0090246
Reset Form
Electrical Connection
1/2 NPTM
SHEET 1 O
Drawing 0090247
Drawing 0090246
3/4 NPT(F) M20 x 1.5
Designators: RM, RN, RS, RT Piston Numbers 12, 52

MODEL #
Designators: RM, RN, RS, RT Piston Numbers 4, 54

SALES PAGE SALES ORDER # LINE ITEM # PURCHASE ORDER #
1
107.3 4.22 52.0 2.05 69.9 2.75 33.3 1.31 65.6 2.58 28.6 1.12 26.2 1.03 50.8 2.00
NOTES: 1 1. DIMENSION APPROXIMATE AND BASED ON A FIVE THREAD ENGAGEMENT HOUSING RL RM ELECTRICAL CONNECTION SEE CHART RN RS RT 40.5 1.59 ELECTRICAL CONNECTION 3/4 NPTF STD 1/2 NPTF OPT LH & RH M20 X 1.5 F RH ONLY 3/4 NPTF STD 1/2 NPTF OPT RH ONLY M20 X 1.5 F RH ONLY 3/4 NPTF STD 1/2 NPTF OPT RH ONLY 3/4 NPTF STD 1/2 NPTF OPT LH & RH M20 X 1.5 F LH & RH M20 X 1.5 F LH & RH
PIPE KIT MOUNTING BRACKET OPTIONAL
*171.8 6.76 95.3 3.75
RU 71.4 2.81 RW RY * LENGTH 1, 5, 6, 9, 56 SHOWN ADD 13.2 0.52 * LENGTH 2, 3 14.0 ADD 0.55 24.1 ADD 0.95 14.0 ADD 0.55 N/A
TITLE
*54.7 2.15
28.6 1.13 7.1 0.28 PROCESS CONN SIZE 1/4 NPTF
14685 W 105TH ST LENEXA, KS 66215 USA 913-888-2630 SORINC.COM ISO-9001

DRAWN BY
A1
PROCESS CONNECTION 37.3 1.47 71.4 2.81 1/4 OR 1/2 NPTM PROCESS CONNECTION OPTIONAL 6.4 0.25 63.5 HARDWARE WITH MIN 2.5 76.2 TO MAX MOUNTING HOLES 3.00 CLEARANCE SLOTS FOR
1/2 NPTF 9/16 SAE 3/4 NPTM PROCESS CONN SIZE 1/4 NPTM SHOWN 1/2 NPTM
N/A ADD 23.1 0.91
K MITCHELL
CHECKED BY
M SMITH
ENGINEER APPROVAL
S BOAL
DATE
06 JUN 2011
Drawing 0090245
9.7 0.31 MOUNTING HARDWARE CLEARANCE FOR

133.4 5.25
LENGTH A 29.7 1.17 38.9 1.53
Electrical Connection
DO NOT SCALE PRINT
DIM DWG 1, 2, 3, 5, 6, 9 & 56 R - SERIES W/PIPE KIT OPTION
DRAWING NUMBER
REV
0090245
8
DWG SIZE
SHEET 1 OF 1
Designators: RM, RN, RS, RT Piston Numbers 5, 6, 1, 9, 56
3/4 NPT(F) M20 x 1.5
Reset Form
Form 216
22/32
sorinc.com 913-888-2630
Dimensions
Open Bracket
Drawing 0090007
Designators: H3 Piston Numbers 12, 52
Drawing 0090017
Designators: H3 Piston Numbers 4, 54
Drawing 0090027
Designators: H3 Piston Numbers 5, 6, 9, 1, 56
23/32
Dimensions
Drawing 0090009
Designators: N6 Piston Numbers 12, 52
Drawing 0090010
Designators: N6 Piston Numbers 4, 54
Drawing 0090020
Designators: N6 Piston Numbers 5, 6, 9, 1, 56
Form 216
24/32
sorinc.com 913-888-2630
Dimensions
MODEL #
SALES ORDER #
LINE ITEM #
PURCHASE ORDER #
86.1 3.39 137.3 5.41 20.6 0.81 71.1 2.80 ELECTRICAL CONNECTION 3/4 NPTF STD 1/2 NPTF OPT 6.4 0.25
137.3 5.41 71.1 2.80 ELECTRICAL CONNECTION 3/4 NPTF STD 1/2 NPTF OPT
105.9 4.17 20.6 0.81 26.6 1.05 6.4 0.25
227.2 8.94 161.1 6.34 120.7 4.75
*181.5 7.15
80.8 3.18 40.4 TYP 1.59 TYP
80.8 3.18 TYP 40.4 1.59 TYP
*181.5 7.15
*115.3 4.54 *74.9 2.95
1/4 NPTF FLUSHING PORT CLEARANCE 6.4 FOR 0.25 MOUNTING HARDWARE
DETAIL 2 NPTF PROCESS CONNECTION *115.3 SCALE 0.5 4.54

*74.9 2.95
6.7 0.26 CLEARANCE 6.4 FOR MOUNTING 0.25 HARDWARE
DETA 1 NPT PROCESS CON SCALE
ISO-9001
14685 W 105TH 91 SO
A 1/4 OR 1/2 NPT MALE PROCESS CONNECTION OPTIONAL PROCESS CONNECTION
PROCESS CONN SIZE 1/4 NPTM 1/2 NPTM 1 NPTM 2 NPTF SEE DETAIL
* LENGTH SHOWN ADD 5.6 0.22 25.4 ADD 1.00
DRAWN BY
PRODUCT CERTIFICATION DRAWING ALL DIMENSIONS ARE 1/16 IN UNLESS OTHERWISE SPECIFIED MM LINEAR = A IN
K MITCHELL
CHECKED BY
PROCESS CONN SIZE 1/4 NPTM 1/2 NPTM PROCESS CONNECTION 1 NPTM
* LENGTH SHOWN ADD 46.0 1.81
PRODUCT CERTIFICATION DR ALL DIMENSIONS ARE 1 UNLESS OTHERWISE SPEC MM LINEAR = IN
J REHM
ENGINEER APPROVAL
S BOAL
DATE
12 AUG 2011
TITLE
THIS DRAWING IS THE EXCLU NO USE WHATSOEVER OF THE I HEREON, NOR REPRODUCTION I MADE WITHOUT THE EXPRESS W
TITLE
LENGTH A 1/4 NPTM OR 1/2 NPTM PROCESS CONNECTION OPTIONAL 1/4 NPTM SHOWN 1/2 NPTM 29.7 1.17 38.9 1.53
DIM DWG 4/54 L EO NUMBER: 5090 SCALE: 0.88

DO NOT SCALE PRINT
Drawing 0090146
LENGTH A 1/4 NPTM SHOWN 1/2 NPTM
DRAWI
Designators: L Piston Numbers 12, 52

MODEL #
29.7 1.17 38.9 1.53
Drawing 0090145
DIMENSION DRAWING 12/52 L EO NUMBER: 4596 SCALE: 0.75
DO NOT SCALE PRINT DRAWING NUMBER REV
0090146
Designators: L Piston Numbers 4, 54

B
SHEET 1 OF 1
DWG SIZE
Reset Form
79.3 3.12 137.3 5.41 71.1 2.80 20.6 0.81 6.4 0.25
PROCESS CONN SIZE 1/4 NPTF 1/2 NPTF 9/16 SAE 3/4 NPTM PROCESS CONN SIZE 1/4 NPTM SHOWN 1/2 NPTM
* LENGTH 1, 5, 6, 9, 56 SHOWN ADD 13.2 0.52
N/A ADD 23.1 0.91
* LENGTH 2, 3 14.0 ADD 0.55 24.1 ADD 0.95 14.0 ADD 0.55 N/A
LENGTH A 29.7 1.17 38.9 1.53
80.8 3.18 TYP 40.4 1.59 TYP ELECTRICAL CONNECTION 3/4 NPTF STD 1/2 NPTF OPT
*178.8 7.04
*112.6 4.43 CLEARANCE 6.4 FOR 0.25 MOUNTING HARDWARE

DRAWN BY
*72.2 2.84
ISO-9001
K MITCHELL
CHECKED BY
M SMITH
ENGINEER APPROVAL
S BOAL
DATE
15 SEP 2011
TITLE
Drawing 0090144
DIMENSION DRAWING 1/2/3/5/6/9/56 L
Designators: L Piston Numbers 5, 6, 9, 1, 56

PROCESS CONNECTION

DO NOT SCALE PRINT
DRAWING NUMBER
REV
0090144 SHEET 1 OF 1
9
DWG SIZE
Reset Form
25/32
Dimensions
Drawing 0090149
Designators: S Piston Numbers 12, 52
Drawing 0090148
Designators: S Piston Numbers 4, 54
Drawing 0090147
Designators: S Piston Numbers 5, 6, 9, 1, 56
Form 216
26/32
sorinc.com 913-888-2630
Dimensions

MODEL # SALES ORDER # LINE ITEM # PURCHASE ORDER #
MODEL #
SALES PAGE
149.5 MIN 5.88 133.4 5.25 71.4 MIN 2.81
106.2 4.18 ELECTRICAL CONNECTION 3/4 NPTF STD 1/2 NPTF OPT OR PLUGGED OPT 3 PLACES TYP 34.0 1.34
50.8 2.00
PROCESS CONNECTION SIZE 1/4 NPTM SHOWN 1/2 NPTM
LENGTH A 29.7 1.17 38.9 1.53
149.5 MIN 5.88 133.4 5.25 71.4 MIN 2.81
106.2 4.18 ELECTRICAL CONNECTION 3/4 NPTF STD 1/2 NPTF OPT OR PLUGGED OPT 3 PLACES TYP 34.0 1.34
50.8 2.00
PROCESS CONN SIZE 1/4 NPTF 1/2 NPTF 1 NPTM PROCESS CONN SIZE 1/4 NPTM SHOWN 1/2 NPTM
* LEN
SHO
8.7 0.34
PROCESS * LENGTH * LENGTH CONN SIZE BRASS & ALUM ALL OTHER 1/4 NPTF 1/2 NPTF 1 NPTF SHOWN SHOWN ADD ADD 19.8 0.78 25.4 1.00 SHOWN SHOWN ADD ADD 5.6 0.22 25.4 1.00
8.7 0.34
ADD
LENG
29 1. 38 1.
54.0 2.13 TYP 108.0 4.25 TYP *202.9 7.99
PIPE KIT MOUNTING BRACKET OPTIONAL
2 NPTF
54.0 2.13 TYP 108.0 4.25 TYP
PIPE KIT OPTIONAL
95.3 3.75 71.4 2.81
*202.9 7.99
95.3 3.75
SCALE 0.25 4.79
*121.7 4.79
*67.7 2.67
CLEARANCE 6.4 FOR 0.25 MOUNTING HARDWARE CLEARANCE 7.9 FOR 0.31 MOUNTING HARDWARE
28.6 1.13
*121.7 CLEARANCE 6.4 FOR 0.25 MOUNTING HARDWARE CLEARANCE 7.9 FOR 0.31 MOUNTING HARDWARE
71.4 2.81 28.6 1.13
DETAIL 1 NPTM SCALE 0.25
*67.7 DRAWN 2.67 BY
K MITCHELL
CHECKED BY
ISO-9001
14685 W 105TH ST LENEXA, KS 6621 913-888-2630 SORINC.COM

DRAWN BY
M SMITH
ENGINEER APPROVAL
S ROOS
DATE
PROCESS CONNECTION
21 JUN 2011
K MITC
CHECKED BY
M SMIT
ENGINEER A
S BOAL
DATE
PROCESS CONNECTION
05 OC
1/4 OR 1/2 NPTM PROCESS CONNECTION OPTIONAL 119.4 4.70

TITLE
94.5 3.72
DIMENSION DRAWING 12/52 LC W/ HEX NIPPLE & PIPE KIT OPTIONS EO NUMBER: 5090 SCALE: 0.75
THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SOR NO USE WHATSOEVER OF THE INFORMATION CONTAIN HEREON, NOR REPRODUCTION IN WHOLE OR PART MAY MADE WITHOUT THE EXPRESS WRITTEN PERMISSION OF
TITLE
0090399 SHEET 1 OF 1
4
DWG SIZE
1/4 OR 1/2 NPTM PROCESS CONNECTION OPTIONAL SCALE 0.25
DIMENSION DRAWING 4/54 LC W/HEX NIPPLE & PIPE KIT OPTIONS EO NUMBER: 5123 SCALE: 0.25
0090456 SHEET 1 OF 1
Reset Form
Model Name: 0090456_1NPTM.ASSEM/4/0
Drawing 0090399
Designators: LC SC Piston Numbers 12, 52 SC shown. LC identical except right-hand electrical connection only.
MODEL # SALES ORDER #
Drawing 0090456 Designators: LC SC Piston Numbers 4, 54

SC shown. LC identical except right-hand electrical connection only.
LINE ITEM # PURCHASE ORDER # SALES PAGE
1
Res
106.2 4.18 149.5 MIN 5.88 71.4 MIN 2.81 34.0 1.34 8.7 0.34
PROCESS CONNECTION SIZE 1/4 NPTM SHOWN 1/2 NPTM PROCESS CONN SIZE 1/4 NPTF 1/2 NPTF 1/2 NPTM * LENGTH 1, 5, 6, 9, 56 SHOWN ADD ADD 13.2 0.52 23.1 0.91
LENGTH A 29.7 1.17 38.9 1.53 * LENGTH 2, 3 14.0 ADD 0.55 24.1 ADD 0.95 N/A ADD 14.0 0.55
54.0 2.13 TYP 108.0 4.25 TYP
9/16 SAE 3/4 NPTM
SHOWN ADD 23.1 0.91
N/A
*200.2 7.88
ELECTRICAL CONNECTION 3/4 NPTF STD 1/2 NPTF OPT OR PLUGGED OPT 3 PLACES TYP SCALE 0.25
DRAWN BY
*119.0 4.68 *65.0 2.56
CLEARANCE 6.4 FOR 0.25 MOUNTING HARDWARE
K MITCHELL
CHECKED BY
M SMITH
ENGINEER APPROVAL
S ROOS
DATE
13 JUL 2011
A
TITLE
Drawing 0090408
Model Name: 0090408.ASSEM/***/***
PROCESS CONNECTION
DIMENSION DRAWING 1/2/3/5/6/9/56 LC W/HEX NIPPLE OPTION EO NUMBER: 5123 SCALE: 0.75
0090408 SHEET 1 OF 1
9
DWG SIZE
Designators: LC SC Piston Numbers 5, 6, 9, 1, 56 SC shown. LC identical except right-hand electrical connection only.
Reset Form
27/32
Dimensions

MODEL #
1
PROCESS CONN SIZE 1/4 NPTF
SALES PA
* LENGTH SHOWN SHOWN ADD 5.6 0.22 25.4 ADD 1.00

141.3 5.56
SALES ORDER #
LINE ITEM #
PURCHASE ORDER #
PROCESS CONN SIZE 1/4 NPTF 70.6 2.78 2X 78.5 3.09 39.1 1.54 CLEARANCE 6.4 FOR 0.25 MOUNTING HARDWARE 1/2 NPTF 88.9 3.50 22.2 0.88 1 NPTM SEE DETAIL
* LE
141.3 5.56 70.6 2.78 2X 78.5 3.09 39.1 1.54 CLEARANCE 6.4 FOR 0.25 MOUNTING HARDWARE 3X ELECTRICAL CONNECTION 3/4 NPTF STD 1/2 NPTF OPT OR PLUGGED OPT 88.9 3.50 22.2 0.88 25.0 0.98
1/2 NPTF 1 NPTF 2 NPTF SEE DETAIL
SH
SH
ADD
LENGTH A 1/4 NPTM SHOWN 1/2 NPTM 9.8 0.39 29.7 1.17 38.9 1.53
LENGTH A 1/4 NPTM SHOWN 1/2 NPTM
3X ELECTRICAL CONNECTION 3/4 NPTF STD 1/2 NPTF OPT OR PLUGGED OPT
2 1 3 1
9.8 0.39
*184.9 7.28
*183.6 1/4 NPTF 7.23 FLUSHING PORT

5.2 0.20
DETAIL 1 NP PROCESS CONNE SCALE 0.2
*116.7 4.59 *77.3 3.04
ISO-9001
14685 *115.3 W 105TH ST LENEXA, KS 66215 USA 913-888-2630 4.54 SORINC.COM
PRODUCT CERTIFICATION DRAWING 2.99 ALL DIMENSIONS ARE 1/16 IN UNLESS OTHERWISE SPECIFIED MM LINEAR = IN
*76.0
DRAWN BY
ISO-9001
14685 W 105TH ST LENEXA, KS 66 913-888-2630 SORINC.COM
K MITCHELL
CHECKED BY
DRAWN
M SMITH
ENGINEER APPROVAL
S BOAL
DATE
07 JUN 2011
K MIT
CHECKED
M SM
ENGINEE
S BOA
DATE
A
TITLE
THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SOR. NO USE WHATSOEVER OF THE INFORMATION CONTAINED HEREON, NOR REPRODUCTION IN WHOLE OR PART MAY BE A MADE WITHOUT THE EXPRESS WRITTEN PERMISSION OF SOR.
07 J
THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SO NO USE WHATSOEVER OF THE INFORMATION CONTA HEREON, NOR REPRODUCTION IN WHOLE OR PART M MADE WITHOUT THE EXPRESS WRITTEN PERMISSION O
PROCESS CONNECTION
DIM DWG 12 & 52 TA EO NUMBER: 5090 SCALE: 0.75

0090155 SHEET 1 OF 1
7
DWG SIZE
PROCESS CONNECTION
TITLE
DIM DWG - 4 & 54 TA EO NUMBER: 5090 SCALE: 0.75

0090154 SHEET 1 OF 1
Reset Form
Re
Drawing 0090155
Designators: TA Piston Numbers 12, 52
Drawing 0090154
Designators: TA Piston Numbers 4, 54
Drawing 0090153
Designators: TA Piston Numbers 5, 6, 9, 1, 56
Form 216
28/32
sorinc.com 913-888-2630
Dimensions
Explosion Proof
150.1 5.91 75.1 2.95 80.0 3.15 40.0 1.58 110.3 4.34 35.3 1.39 9.5 0.38 1 11.9 0.47
PROCESS CONNECTION SIZE 1/4 NPTM SHOWN 1/2 NPTM
LENGTH A 29.7 1.17 38.9 1.53
DIMENSION APPROXIMATE AND BASED ON A FIVE THREAD ENGAGEMENT PROCESS CONN SIZE 1/4 NPTF, BSPF, PTF * LENGTH SHOWN SHOWN ADD ADD 5.6 0.22 25.4 1.00
ELECTRICAL CONNECTION SEE CHART
1/2 NPTF, BSPF, PTF 1 NPTF, BSPF, PTF 2 NPTF SEE DETAIL
41.2 1.62
*227.7 8.96
CLEARANCE 6.4 FOR 0.25 MOUNTING HARDWARE 1/4 NPTF VENT CONNECTION LH & RH
HOUSING B3 & B6 33.4 1.32 B4 & B5 J4 26.6 1.05
ELECTRICAL CONNECTION 3/4 NPTF STD 1/2 NPTF OPT LH & RH M20 X 1.5 F LH & RH 3/4 PFF RH ONLY
*122.5 4.82

DRAWN BY
K MITCHELL
CHECKED BY
M SMITH
ENGINEER APPROVAL
S BOAL
DATE
12 JUL 2011
A 1
TITLE
94.5 3.72
PROCESS CONNECTION
1/4 NPTF FLUSHING PORT
DIMENSION DRAWING 12/52/124/125/126 B & J SERIES EO NUMBER: 5123 SCALE: 0.69

0090297 SHEET 1 OF 1
10
DWG SIZE
Reset Form
Drawing 0090297
Designators: B3, B4, B5, B6, J4 Piston Numbers 12, 52
MODEL #
Drawing 0090284
Designators: B3, B4, B5, B6, J4 Piston Numbers 4, 54
1
150.1 5.91 75.1 2.95 80.0 3.15 40.0 1.58 110.3 4.34 35.3 1.39 PIPE KIT MOUNTING BRACKET OPTIONAL 105.1 4.14 50.8 2.00
PROCESS CONNECTION SIZE 1/4 NPTM SHOWN 1/2 NPTM PROCESS * LENGTH CONN SIZE 1, 5, 6, 9, 56 1/4 NPTF 1/4 BSPF SHOWN 1/4 PTF 1/2 NPTF 13.2 1/2 BSPF ADD 0.52 1/2 PTF 7/16 - 20 SAE 9/16 SAE SHOWN SHOWN ADD 23.1 0.91
LENGTH A 29.7 1.17 38.9 1.53 * LENGTH 2, 3 ADD ADD ADD ADD 14.0 0.55 24.1 0.95 14.0 0.55 14.0 0.55
41.2 1.62
CLEARANCE 6.4 FOR 0.25 MOUNTING HARDWARE ELECTRICAL CONNECTION SEE CHART 35.7 1.40 71.4 2.81 CLEARANCE 7.9 FOR 0.31 MOUNTING HARDWARE 1/4 NPTF VENT CONNECTION LH & RH 33.4 1.32
71.4 2.81 28.6 1.13
3/4 NPTM 3/4 BSPM 3/4 PTM 95.3 3.75 HOUSING B3 & B6 B4 & B5 J4
N/A
*119.9 4.72
ELECTRICAL CONNECTION 3/4 NPTF STD 1/2 NPTF OPT LH & RH M20 X 1.5 F LH & RH 3/4 PFF RH ONLY
ISO-9001

DRAWN BY
9.5 0.38
K MITCHELL
CHECKED BY
M SMITH
ENGINEER APPROVAL
S BOAL
DATE
15 JUN 2011
TITLE
Drawing 0090882
Designators: B3, B4, B5, B6, J4 Piston Numbers 5, 6, 9, 1, 56
PROCESS CONNECTION
26.6 1.05
DIMENSION DRAWING 1, 2, 3, 5, 6, 9 & 56 B & J SERIES W/PIPE KIT OPTION EO NUMBER: 5090 SCALE: 0.70
0090882 SHEET 1 OF 1
5
DWG SIZE
Reset Form
29/32
Dimensions
Drawing 0090269 Designators: RB Manual Reset Piston Numbers 12, 52
Drawing 0090270 Designators: RB Manual Reset Piston Numbers 4, 54
Drawing 0090271
Designators: RB Manual Reset Piston Numbers 5, 6, 1, 9, 56
Form 216
30/32
sorinc.com 913-888-2630
Dimensions
Drawing 0090167 Designators: S Manual Reset Piston Numbers 12, 52
Drawing 0090168 Designators: S Manual Reset Piston Numbers 4, 54
Drawing 0090169
Designators: S Manual Reset Piston Numbers 5, 6, 1, 9, 56
31/32
SOR offers a full line of commercial-grade process instruments.
echOsonix Level Transmitters
Pressure
Temperature
Level Switches
Flow Switches
Level
Temperature Switches
Flow
Pressure Switches
Process Instrumentation
We Deliver Quality On Time

SOR Inc.
14685 West 105th Street Lenexa, Kansas 66215 Phone 913-888-2630 Toll Free 800-676-6794 Fax 913-888-0767 sorinc.com
SOR Europe, Ltd.

Farren Court Cowfold West Sussex RH13 8BP United Kingdom Phone +44 (0) 1403 864000 Fax +44 (0) 1403 864040
SOR - China
Room 903, No. 10 Building Wan Da Plaza No. 93 Jian Guo Road Chao Yang District Beijing, China 100022 Phone +86 (10) 5820 8767 Fax +86 (10) 58 20 8770
Form 216 Registered Quality System to ISO 9001:2000 9001:2008
32/32
sorinc.com Form 216 (11.08) 2008 SOR Inc. (05.12) 2012 913-888-2630 Registered Quality System to ISO 9001 :2008

Pressure and Vacuum Switches - 216

Uploaded by

Copyright:

Available Formats

Pressure and Vacuum Switches - 216

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Pressure and Vacuum Switches - 216

Uploaded by

Copyright:

Available Formats

Pressure and Vacuum Switches for Process Applications

SOR Pressure Switches

sorinc.com sorinc.com 913-888-2630

Features and Benefits

Warranty 3 years from date of manufacture.

Registered Quality System to ISO 9001 :2008