Scribd
Upload
2K views2 pages

One Way Slab Design

This document summarizes the design of a one-way reinforced concrete slab. It provides the key dimensions of the slab, assumed loads, and calculations to determine the required area of steel reinforcement. The slab is 1.5m by 5m, with a thickness of 125mm. Live and dead loads are specified. Calculations show the maximum bending moment is 9.54 kN-m, and the required steel area is 312.2156 mm^2. A bar diameter of 10mm is proposed, with a required spacing of 251.4288mm.

Uploaded by

Sadeesh Kumar
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
2K views2 pages

One Way Slab Design

This document summarizes the design of a one-way reinforced concrete slab. It provides the key dimensions of the slab, assumed loads, and calculations to determine the required area of steel reinforcement. The slab is 1.5m by 5m, with a thickness of 125mm. Live and dead loads are specified. Calculations show the maximum bending moment is 9.54 kN-m, and the required steel area is 312.2156 mm^2. A bar diameter of 10mm is proposed, with a required spacing of 251.4288mm.

Uploaded by

Sadeesh Kumar
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 2

Oneway Slab Design

Slab Size 1.5m x 5m Shorter dimension of slab, lx Longer dimension of slab, ly ly/lx Assuming thickness of slab Dia of bar used Clear cover Effective depth Consider width fck fy Loads Live load Dead load Floor Finish Total load Fact. load Moment Calculation As per IS: 456 - 2000, Mu Mu Mu,lim
2 2 KN/m 3.125 KN/m2 1.5 KN/m2 2 6.625 KN/m 2 9.9375 KN/m

0.96 3.015 3.140625 125 8 15 106 1000

m m Oneway Slab mm mm

mm mm 2 20 KN/m

2 415 KN/m

wlx/2 9.54 KN-m. 0.138 x fck x b x d2 31011360 N-mm 31.01136 KN-m.

Under Reinforced Section

Ast Calculation Ast req M/(0.87fyjd)


2 312.2156 mm

dia of bar proposed

10

Ast min 0.12%bD Req Spacing for 10 mm dia bars

150 mm 251.4288 mm

mm

You might also like