Scribd
Upload
38 views2 pages

Supplement To ASME B16.34-2009 Valves - Flanged, Threaded, and Welding End

This document summarizes corrections made to ASME B16.34-2009 Valves — Flanged, Threaded, and Welding End. The corrections were approved by ANSI on October 20, 2010. The corrections include additions and deletions of material specifications and grades in several tables regarding material group numbers and material specifications for castings. Notes are also added or deleted related to maximum temperature limits.

Uploaded by

chinmayaj_1
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
38 views2 pages

Supplement To ASME B16.34-2009 Valves - Flanged, Threaded, and Welding End

This document summarizes corrections made to ASME B16.34-2009 Valves — Flanged, Threaded, and Welding End. The corrections were approved by ANSI on October 20, 2010. The corrections include additions and deletions of material specifications and grades in several tables regarding material group numbers and material specifications for castings. Notes are also added or deleted related to maximum temperature limits.

Uploaded by

chinmayaj_1
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Supplement to ASME B16.

34-2009 Valves Flanged, Threaded, and Welding End


The supplement corrections listed below apply to ASME B16.34-2009. This supplement was approved by the American National Standards Institute (ANSI) on October 20, 2010. Page 24 Location Table 1 Change (1) For Material Group No. 2.1, under Castings, Spec. No. A 351 added in the first row. Under Castings, Grade CF3 inserted in the first row. (2) For Material Group No. 2.2, under Castings, Spec. No. A 351 added in the third row. Under Castings, Grade CF3M inserted in the third row. (3) For Material Group No. 2.3, under Castings, Spec. No. A 351 and Grades CF3 and CF3M deleted. For Material Group No. 2.5, under Castings, Spec. No. A 351 and Grade CF8C deleted. (1) In the second column, third entry, A 351 Gr. CF3 (2) added. (2) Referenced Note (2) added: (2) Not to be used over 425C. (1) In the second column, third entry, A 351 Gr. CF3 (2) added. (2) Referenced Note (2) added: (2) Not to be used over 425C.

25

Table 1

48

Table 2-2.1

49

Table 2-2.1

THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS Three Park Avenue, New York, NY 10016-5990 December 2010

J1809A

Page 50 51 52

Location Table 2-2.2 Table 2-2.2 Table 2-2.3

Change In the second column, fifth entry A 351 Gr. CF3M (3) added. In the second column, fifth entry A 351 Gr. CF3M (4) added. In the third column, second and third entries [A 351 Gr. CF3 (1) and A 351 Gr. CF3M (1), respectively] deleted. In the third column, first entry A 351 Gr. CF8C (3) deleted. In the third column, first entry A 351 Gr. CF8C (3) deleted. (1) In the second column, third entry A 351 Gr. CF3 (2) added. (2) Referenced Note (2) added: (2) Not to be used over 800F. (1) In the second column, third entry A 351 Gr. CF3 (2) added. (2) Referenced Note (2) added: (2) Not to be used over 800F. In the second column, seventh entry A 351 Gr. CF3M (3) added. In the second column, seventh entry A 351 Gr. CF3M (3) added. In the third column, second and third entries [A 351 Gr. CF3 (1) and A 351 Gr. CF3M (1), respectively] deleted. (1) In the third column, first entry A 351 Gr. CF8C (3) deleted. (2) Note (3) deleted. (1) In the third column, first entry A 351 Gr. CF8C (3) deleted. (2) Note (3) deleted.

55 56 132

Table 2-2.5 Table 2-2.5 Table VII-2-2.1

133

Table VII-2-2.1

134 135 136

Table VII-2-2.2 Table VII-2-2.2 Table VII-2-2.3

139

Table VII-2-2.5

140

Table VII-2-2.5

You might also like