V3.0.0.3 User Guide v2.

 2009 xyzmo SIGNificant Group. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, for any purpose other than the purchasers personal use, without the express written consent of xyzmo SIGNificant group. xyzmo SIGNificant group makes no representations or warranties with respect to the contents hereof and specifically disclaims any implied warranties or merchantability or fitness for any particular purpose. Further, xyzmo SIGNificant group reserves the right to revise this publication and to make changes in the contents thereof without obligation to notify any person of such revisions or changes. In no event should xyzmo SIGNificant group be liable for any incidental, direct or indirect, special or consequential damages whatsoever (including, but not limited to loss of profits) arising out of or related to this manual, or the use of the product, or any use thereof. All trademarks appearing in this manual are the property of their respective holders. More information regarding xyzmo SIGNificants products can be found at http://www.xyzmo.com some videos can be found at http://vimeo.com/xyzmo/.

`sig,uid=Product Management`

Contents
Introduction About xyzmo SIGNificant About SIGNificant Client About This Guide Related Publications Why Electronic Signatures Important Remark Important Remark Setting Up SIGNificant Client Requirements Installation Procedure Installing SIGNificant Client Registering SIGNificant Client Software Installing Certificates Updating SIGNificant Client Uninstalling SIGNificant Client Getting Started with SIGNificant Client Accessing SIGNificant Client Using the SIGNificant Client Interface Using the Tree Using the Description Area Using the Document Pane Opening Documents Using the SIGNificant Client Printer SIGNificant Client Office 2007 Plugin Verifying Documents Enrolling a biometric profile Designing Documents Designing Documents in SIGNificant Client Adding Signers Adding Signature Fields Removing Signers Removing Signature Fields Saving the Design Designing Documents in Other Programs User Guide v2.0 5 5 5 6 6 6 6 9 11 11 12 12 18 19 22 22 23 23 25 25 26 26 27 29 30 31 33 35 35 36 38 39 40 40 41 iii

Contents

Signing & Sealing Documents Signing Designed Documents Signing Documents On the Fly Signing documents by stepping through signature fields Clearing Signatures Options Menu Continuing With the Signed Document Saving Copies of a Document Sending an email with the signed document Printing the signed document Add an attachment to the document Closing SIGNificant Client Open signed documents in the Adobe Reader Troubleshooting Installation Error: Error opening file for writing

45 45 50 54 55 56 60 60 60 61 61 61 62 65 65

User Guide v2.0

iv

Chapter 1

Introduction
This chapter introduces SIGNificant Client and this guide.

About xyzmo SIGNificant

xyzmo SIGNificant Group is a leading provider of electronic and digital signature solutions, offering an exclusive product line that equips organizations with a smooth transition to a secured paperless environment. Our digital signature solutions, including the digital stamp and the personal electronic and biometric signature, represent the basis for integrated digital processes. Thanks to our signature solutions, stamping and signing remain as easy as ever, but are performed directly in the electronic document and can be integrated with any existing application or document workflow procedures. xyzmo SIGNificant is a private company based in Ansfelden, Austria with international offices in the United States, Israel and Germany. xyzmo SIGNificant is the internationally leading supplier of comprehensive digital signature solutions for the safeguarding and optimization of business processes. Originating from an almost 100-year tradition in stamps and signature signing, we possess the competency to carry these processes over to the digital world in a user-friendly manner.

About SIGNificant Client

SIGNificant Client allows users to quickly and easily design, sign, e-Mail and print documents, without the need of a server. This solution is especially suitable for professionals who work offline or who do not have Internet connectivity on a regular basis. For example, insurance agents can sign policies in the field, lawyers can sign contracts while visiting clients, and customers can sign sales agreements at a point of sale (POS). SIGNificant Client users can prepare fully designed documents that specify exactly who must sign the document, how they must sign, and where their signatures should appear in the document. Alternatively, users can design and sign documents on the fly. Documents can be signed using a signature tablet, tablet pc or using a certificate. The signature is then embedded in the document. If desired, SIGNificant Client can authenticate the signature biometrically, by checking the signature against the signer's enrolled signature in the SIGNificant Biometric Server, when Internet or Network connectivity is established. By eliminating pen-and-paper signatures, SIGNificant Client transforms your office into a timeefficient and environmentally friendly place. Once all signers have signed a document, it is secured against further modification and saved locally. The document can then be viewed by any user using Adobe Acrobat Reader, and it can be uploaded to the companys server when Internet connectivity is established.

You can find a short video about the product here: http://vimeo.com/2825966

User Guide v2.0

Introduction

About This Guide

This guide contains all the information necessary to install and use SIGNificant Client.

Related Publications
This guide should be used in conjunction with: SIGNificant Client Administrator Guide

Why Electronic Signatures

Most of the companies today, automate their business processes and document workflow procedures, leaving the approval stage the only component that requires the need of paper. Digital and electronic signatures replace the concept of traditional paper-based signing with an electronic one. Signing the original electronic document saves companies on labor, faxing, mailing and archiving costs. Lost documents or missing signatures are a thing of the past, as after the signing process ends, all documents are immediately available for archiving or further processing. Additionally, digital signatures safeguard electronic documents and files by allowing the authentication of the signatory and verification of the original document. By embedding these solutions in their business, companies will no longer need to print documents and brake the electronic document cycle solely for the purpose of capturing a handwritten signature, therefore establishing a fully digitized process. When considering the operational overhead of paper-based processes, the cost of each document becomes fairly high. From the experience we acquired in xyzmo SIGNificant, we learnt that the simple step of embedding an electronic signature solution enables business to achieve two important goals, which are making and saving more money, resulting in a better bottom line with a quick and proven ROI.

Important Remark
Laws and regulations regarding electronic signatures vary from one country to the other. The user of the SIGNificant Client accepts that it is its own responsibility to comply with all applicable laws and regulations within this context, and that xyzmo SIGNificant is not liable for this in any way whatsoever.

User Guide v2.0

Introduction

Whats new in Version 3.0.0.3 Stepping through signature fields: With the sq command within a sigstring it is possible to create numbered signature fields. If a document needs to be signed in a special order the user can press the Start Stepping button and one singing dialogue after the other is shown. Attachment Support: Significant Client supports the functionality to attach files or additional pages to a pdf document. Therefore a new dialogue can be found by pressing the Add Attachment button.

Additional pdf documents, images and other files can also be attached via an attachment string in documents to print by giving the filename and the type how to attach the file (as page or as file). Example:

User Guide v2.0

Introduction

Inline Signing: Comfortable Inline Signing can now be activated via the global configuration. With Inline Signing the users view is not disturbed by a signing dialogue. The user is able to view the whole document during signing due to a small transparent signing feature.

User Guide v2.0

Introduction

Signing Information: Next to the usual signature information it is possible to activate a Remarks field for additional information. Also custom fields can be created now via options menu.

Important Remark
There are many possibilities to configure the appearance and functionalities of the SIGNificant Client in different ways. It might be that your interface looks quite different then the pictures in this guide, because your company decided to use a different customizing for the interface and/or only a subset of the functionalities. Please contact your relevant helpdesk in this case.

User Guide v2.0

Chapter 2

Setting Up SIGNificant Client

This chapter explains how to install, register, and uninstall SIGNificant Client.

Requirements
In order to install and register SIGNificant Client, you must have administration rights on the local machine. In addition, the machine must meet the following requirements. Table 1: Item Hardware Signature tablet or Digital pen Smartcards or tokens Printer port Software General certificate If a signer does not use a personal certificate to sign the document, the document is sealed with a general certificate. While SIGNificant Client comes with a demo certificate, it is recommended to use a certificate that is issued to you or your company. Signers can seal a document with a personal certificate, in addition to or instead of their handwritten signature. A Wintab-compatible pen or signature tablet SIGNificant Client Requirements Requirement

Required only if certificates that are located on smartcards or tokens are to be used

Personal software certificate Relative driver for tablet Relative driver for smartcard readers or tokens OS Development environment Registration (challenge/license key)

Microsoft Windows XP, Microsoft Windows Vista 32bit, Microsoft .NET Framework 2 and up SIGNificant Client comes with a built-in 90-day trial license. Once the license has expired, you must register your software in order to obtain another license.

User Guide v2.0

11

Setting Up SIGNificant Client

Installation Procedure
Setting up SIGNificant Client includes the following steps: 1. 2. 3. Install SIGNificant Client. See Installing SIGNificant Client on page 12. Register your SIGNificant Client software. See Registering SIGNificant Client Software on page 18. (Optional) To enable signers to digitally sign documents using a certificate, install a certificate. See Installing Certificates on page 19.

Installing SIGNificant Client

Note: You can download the SIGNificant Client here: http://www.xyzmo.com/en/resource-center/Pages/SIGNificantClient.aspx

To install SIGNificant Client

1.

Double-click on the file SIGNificant Client.exe. The SIGNificant Client Setup Wizard opens, displaying the Welcome screen.

2.

Click Next.

User Guide v2.0

12

Setting Up SIGNificant Client

The License Agreement dialog box appears.

3. 4.

Read the license agreement carefully, and click I accept the terms in the License Agreement if you agree. Click Next. The Choose Components dialog box appears.

5. 6.

Select the check boxes next to the components you want to install. Click Next. 13

User Guide v2.0

Setting Up SIGNificant Client

The Choose Install Location dialog box appears displaying the default installation folder.

7.

To install SIGNificant Client to a different folder, do the following: a. Click Browse. The Browse For Folder dialog box appears.

b. c. 8.

Browse to the desired folder. Click OK.

Choose which Tablet Type you are using and click Install. If you use the Client only for stamping and do not want to capture a handwritten signature, choose the option Other or no tablet. 14

User Guide v2.0

Setting Up SIGNificant Client

9.

The Installing screen appears.

SIGNificant Client is installed. A progress bar tracks the installation process. Note: If a previous version is installed, the following screen will appear first and you will have to uninstall that version before continuing.

User Guide v2.0

15

Setting Up SIGNificant Client

Click Yes.

Click Yes again.

Click Ok and you are back in the normal installation process. If desired, you can view installation details, by clicking Show details.

User Guide v2.0

16

Setting Up SIGNificant Client

At the end of the installation process, the Completing the SIGNificant Client Setup Wizard screen appears.

10.

Click Finish. The wizard closes.

User Guide v2.0

17

Setting Up SIGNificant Client

Registering SIGNificant Client Software

SIGNificant Client comes with a built-in 90-day demo license. Once the license has expired, you must register your software in order to obtain another license.
To register your SIGNificant Client software

1.

Click START > Program Files > SIGNificant > SIGNificantOfflineClient > Configure License. The Register your Software dialog box appears.

2. 3.

Click Request License. Your browser opens displaying a form. Do one of the following:

To obtain a demo license, click Request demo license. To obtain a permanent license, click Request permanent license.
Remark: From a commercial standpoint there are two license options available. Please contact your xyzmo SIGNificant Partner or xyzmo SIGNificant if you are not sure which license you need:

4. 5.

Named User License: A Named user is defined as an individual authorized to use a software product. A non human operated device needs a license per transaction in addition to all individuals. Number must be measured at the multiplexing front end. Seat License: A Seat is defined as a license to either install the software product on one seat (e.g. a PC used as signing station) or a signing station (e.g. a regular PC) has access (e.g. via the web) to the software product installed on a server. The Seat License can be used by multiple signers. Number must be measured at the multiplexing front end.

Copy the Challenge Code from the Register your Software dialog box, and paste it in the relevant field. Complete the rest of the form with your details. Note: You must supply a valid email address. You will receive an email containing a license key.

6. 7.

Copy the license key from the email, and paste it into the Register your Software dialog box's License Key field. Click OK.

User Guide v2.0

18

Setting Up SIGNificant Client

Installing Certificates
In order to enable signers to use a certificate to digitally sign documents in SIGNificant Client, instead of or in addition to a signature tablet, you must install a certificate.
To install a certificate

1.

Obtain a certificate from any certificate authority (CA), and store it on your computer. Note: If the desired certificate is located on a token or smartcard, you will need to install additional software. Contact the token or smartcard vendor for further information.

2.

Double-click on the certificate. The Certificate Import Wizard opens displaying the Welcome screen.

3.

Click Next.

User Guide v2.0

19

Setting Up SIGNificant Client

The File to Import dialog box appears.

4.

Click Next. The Certificate Store dialog box appears.

5. 6. 7.

Click Place all certificates in the following store. Click the Browse button and browse to the Personal certificate store. Click Next.

User Guide v2.0

20

Setting Up SIGNificant Client

The Completing the Certificate Import Wizard dialog box appears.

8. 9.

Click Finish. To check that you installed the certificate successfully: a. b. c. d. e. f. g. In Internet Explorer, click Tools > Internet Options. Click the Content tab. Click Certificates. Click the Trusted Root Certification Authorities tab. Select the relevant certificate. Click View. Check that the information displayed is correct and that the certificate is valid.

User Guide v2.0

21

Setting Up SIGNificant Client

Updating SIGNificant Client

If SIGNificant Client was installed by your company's network administrator, it may be configured to automatically check for updates. In this case, a dialog box may appear when you start SIGNificant Client, notifying you that a newer version of SIGNificant Client is available for download.

Do one of the following: To update SIGNificant Client, click Download now. To continue to SIGNificant Client without updating it, click OK. If you dont want to get this information anymore click on Dont show me again after that you still have the chance to look for updates by clicking on MENU Help Check for updates

Uninstalling SIGNificant Client

To uninstall SIGNificant Client

1. 2. 3.

In the START menu, click Control Panel. Double-click Add or Remove Programs. The Add or Remove Programs window opens. Select SIGNificant Client.

4. 5.

Click Change/Remove. A confirmation message appears. Click Yes. SIGNificant Client is uninstalled. A success message appears.

6.

Click OK.

User Guide v2.0

22

Chapter 3

Getting Started with SIGNificant Client

This chapter introduces the SIGNificant Client interface.

Accessing SIGNificant Client

To access SIGNificant Client

Do one of the following:

If you installed a desktop shortcut, click

on your desktop

Or simply choose a PDF-document and drag-and-drop over the Icon The Client will open with this PDF document. If you installed a Quick Launch shortcut, click on your Quick Launch bar.

In the START menu, click All Programs > SIGNificant > SIGNificant Client.

User Guide v2.0

23

Getting Started with SIGNificant Client

The SIGNificant Client main screen appears.

Note: There are many possibilities to configure the appearance and functionalities of the SIGNificant Client in different ways. It might be that your interface looks quite different then the picture above, because your company decided to use a different customizing for the interface and or the functionalities. Please contact your relevant helpdesk in this case.

User Guide v2.0

24

Getting Started with SIGNificant Client

Using the SIGNificant Client Interface

The SIGNificant Client interface consists of the following major elements: Signatures Pane. The Signatures Pane allows working with signers and signature fields in the currently open document. It includes the following:

Tree. The tree displays all defined signers and signature fields for the current document. See Using the Tree on page 25. Description Area. The description area displays information about the signer or signature field that is selected in the tree. See Using the Description Area on page 26.

Document Pane. The Document Pane displays the currently open document and enables you to navigate between the document's pages. See Navigating the Document on page 26.

Using the Tree

Tree nodes that represent a signer can be expanded to reveal the signer's signature fields or collapsed.
To expand a node

Click the

icon next to the node.

The node is expanded.

To collapse a node

Click the

icon next to the node.

The node is collapsed. In addition, each node in the tree is marked with one of the following icons: User Guide v2.0 25

Getting Started with SIGNificant Client

Table 2: When this icon...

Tree Icons Appear next to a signer, it indicates that... The signer has not yet signed the document. The signer has signed the document. And when it appears next to a signature field, it indicates that... The signature field has not yet been signed. The signature field has been signed.

Using the Description Area

To use the Description Area

In the tree, click on the signer or signature field on which you want to view information. If you clicked on a signer, the Description Area displays the selected signing method for the signer. If biometric authentication is selected for the signer, this information is displayed as well. If you clicked on a signature field, the Description Area displays the signature field's description.

Using the Document Pane

To navigate a document

In the Document Pane, do any of the following:

To view the next page, click To view the previous page, click To view the first page, click To view the last page, click

. .

To jump to a specific page, type the desired page number in the field provided at the bottom of the pane and press ENTER.

To zoom the document

In the Document pane, use these buttons to zoom: o o o With + / - and the drop down you can choose a certain zoom level With you use the whole width of the Document Pane With you display one whole page of the document

User Guide v2.0

26

Getting Started with SIGNificant Client

Opening Documents
SIGNificant Client supports opening *.pdf files only. Note: You can convert any document via the SIGNificant Client printer to *.pdf documents and open them automatically in the SIGNificant Client. See next chapter
To open a document

1.

Click

The Open dialog box opens.

2. 3.

Browse to the desired document. Click Open.

User Guide v2.0

27

Getting Started with SIGNificant Client

The document opens in SIGNificant Client.

User Guide v2.0

28

Chapter 4

Using the SIGNificant Client Printer

You can convert nearly any document via the SIGNificant Client Printer to a *.pdf document and open it automatically in the SIGNificant Client. This is a very easy possibility to integrate the SIGNificant Client in your actual process and use it together with nearly any other application. If you have a document in an application and you want to convert it into a *.pdf file and sign/stamp it with the SIGNificant Client just use the Print command:

Choose the printer SIGNificant Client and your document is converted into a *.pdf document and the SIGNificant Client opens automatically with this document.

User Guide v2.0

29

SIGNificant Client Office 2007 Plugin

SIGNificant Client Office 2007 Plugin

The SIGNificant Client Office 2007 Plugin enables you to convert Office formatted files directly from an Office application and load it into the SIGNificant Client. Only one click is needed and you can easily sign and seal your created PDF document. Install the SIGNificant Client Office 2007 Plugin which can be found in the download section of our partnerweb next to the SIGNificant Client. After installing you will find the following menu entry in your Microsoft Office applications:

Just press the Sign button in your opened document and your Microsoft Office file will be converted and uploaded to SIGNificant Client. To use this Plugin a little easier users may add it to the Quick Launch Bar, so you can use the Plugin with really one click.

SIGNificant Client Office 2007 Plugin allows users to parse signature strings when uploading documents to SIGNificant Client and all other features which are integrated in the SIGNificant Client Printer.

User Guide v2.0

30

Verifying Documents

Verifying Documents
When you receive / open a signed document you can verify it in order to know if your document is valid before you sign it. For this feature, internet connection or a network connection to an existing SIGNificant Server is required. To verify a document:

1. Click (If this button is disabled, it means that either you dont have internet connection or the configured SIGNificant Server is not available.) 2. Read through the verification result. If there are more than 1 signatures, the signature on top is the latest one and the only one which can be valid (as signing a document means changing the document)

3. (Optional) If you need a proof, that you have verified the document or if you would like to keep the verification report click on which is a XML document. in order to save the verification report,

4. Click on Close in order to proceed with your own signature.

Note: Besides the described possibility above xyzmo provides a public available verification service -https://verify.xyzmo.com/ - with more detailed results.

User Guide v2.0

31

Chapter 5

Enrolling a biometric profile

SIGNificant Client can work in conjunction with SIGNificant Biometric Server. A persons signature can be compared with a stored biometric profile on the server by parameters of pressure, acceleration, speed, rhythm and movements in the air. With this feature you can reduce fraud, but for any signature, a skilled forger who can forge it competently probably exists. Two parameters are relevant in this context: The False Rejection Rate (FRR) is the rate at which valid signatures are rejected. The False Acceptance Rate (FAR) is the rate at which forged signatures are accepted as valid.

Typically low FRR implies high FAR, and vice-versa. You can expect FRR and FAR sum to 2 5% dependent of the configuration of your biometric server. ATTENTION: Actual numbers may be greater!

Of course, this is only possible, when a network connection to the Biometric Server is established. In order to enable biometric authentication, the person must enroll his/her biometric profile on the SIGNificant Biometric Server first. When you have access to a SIGNificant Biometric Server and it is configured correctly, SIGNificant Client provides the possibility to enroll your biometric profile. For more information on configuring SIGNificant Client to connect to a Biometric Server, please read Biometric Profiles in SIGNificantOfflineClient_AdminGuide.pdf For a biometric profile six signature of the person have to be enrolled. If one does not fit the profile it is rejected and has to be performed again, so that you have six valid signatures in total. (e.g. if 1 signature only contains the first name instead of both)

Note: For this feature, internet or network connection is required.

To enroll your biometric profile: 1. Click on MENU and then on enroll user 2. The enroll dialogue box appears. Enter your user name and click on Enroll. 3. Apply your signature on the tablet. If you are done you can choose: a. Click on accept to use the signature for your profile b. Click on retry to apply your signature again c. Click on retry all to start from the beginning d. Click on abort to stop the enrollment process

User Guide v2.0

33

Enrolling a biometric profile

4. Click OK to finish enrollment.

User Guide v2.0

34

Chapter 6

Designing Documents
This chapter explains how to design documents. Note: The SIGNificant Client administrator may choose to disable the option of designing documents for security reasons. In this case, the relevant buttons will be disabled, and you should skip to the next chapter in this guide.

Designing Documents in SIGNificant Client

Designing a document in SIGNificant Client involves specifying the following: Which users are the signers who must sign the document Where the signatures should be located The signing method to use for each signer Whether the signatures must be biometrically authenticated Add a description field for the signer

To design a document

1. 2. 3. 4. 5. 6.

Open the desired document. See Opening Documents on page 27. Add each signer who should sign the document. See Adding Signers on page 36. Add one or more signature fields for each signer. See Adding Signature Fields on page 38. (Optional) Remove signers as needed. See Removing Signers on page 39. (Optional) Remove signature fields as needed. See Removing Signature Fields on page 40. (Optional) Save the document. See Saving Documents on page 60.

User Guide v2.0

35

Designing Documents

Adding Signers
To add a signer

1.

Click

The Add New Signer dialog box opens.

2.

In the Signer field, do one of the following:

3.

To specify a new signer, type the signer's name. To specify a signer who you already added, select the signer's name from the dropdown list.

In the Method drop-down list, specify which signing method the signer can use to sign the document.

If you select Selectable, the signer will be able to choose the signing method. 4. 5. Important: If you select this option, the signer's signature must be enrolled in the SIGNificant Biometric Server before signing the document, and the name specified in the Signer field must be identical to the signer's username in the SIGNificant Biometric Server; otherwise, document signing will fail. For information on enrolling signatures, refer to the Enrolling a biometric Profile. (Optional) To specify that the signer's signature should be authenticated biometrically, select the Authenticate check box.

User Guide v2.0

36

Designing Documents

6.

Do one of the following:

To save the signer and return to the SIGNificant Client main screen, click Save. To save the signer and configure another signer, click Save And New. To close the dialog box without saving the signer, click Close.

The signer appears in the signer tree.

User Guide v2.0

37

Designing Documents

Adding Signature Fields

To add a signature field

1. 2.

In the signer tree, click on the desired signer. Click .

The Add New Signature Fields dialog box opens.

3.

(Optional) In the Description field, type a free text description of the signature. For example, "Please sign this document immediately." If you use the appropriate signature tablets this text will be shown also on the LCD display of the signature tablet, while signing.

4. 5.

In the Signer drop-down list, select the signer who should sign this signature field. Do one of the following:

To save the signature field and return to the SIGNificant Client main screen, click Save. To save the signature field and configure another signature field, click Save And New. To close the dialog box without saving the signature field, click Close.

User Guide v2.0

38

Designing Documents

The signature field appears in the signature tree, under the signer. In addition the signature field appears at the top of the document.

6. 7.

Drag the signature field to the desired location in the document. Add additional signature fields if required

Removing Signers
To remove a signer

In the signer tree, do one of the following:

Right-click on the desired signer, and click Delete Field in the pop-up menu that appears.

User Guide v2.0

39

Designing Documents

Click on the desired signer, then click

The signer and all of the signer's signature fields are removed from the tree and from the document.

Removing Signature Fields

Note: If you remove a signature field that is the only signature field for a signer, the signer will be removed as well. Note: Only unsigned signature fields can be removed. If you would like to remove a signed field, you must clear the signature first. See Clearing Signatures on page 55
To remove a signature field

In the signer tree, do one of the following:

Right-click on the desired signature field, and click Delete Field in the pop-up menu that appears. Click on the desired signature field, then click .

The signature field is removed from the tree and from the document. If it was the only signature field for the signer, the signer is also removed from the tree.

Saving the Design

You can save open documents at any stage, whether they are currently being designed, or are partially signed. Note: Once you have saved a document, no further changes can be made to the document design; however, signers can continue signing the document.
To save a document

1. 2. 3. 4.

Click

The Save As dialog box opens. Browse to the desired directory. Type the desired file name. Click Save. The document is saved.

User Guide v2.0

40

Designing Documents

Designing Documents in Other Programs

If desired, you can design a document in a different program, convert it to PDF format e.g. with the SIGNificant Client Printer, and then open it in SIGNificant Client. Note: You can only design text-based documents, such as Word documents. Designing a document outside of SIGNificant Client involves specifying the following: Which users must sign the document Where the signatures should be located The signature's description Whether the signatures must be biometrically authenticated

Note: When this method of designing documents is used, the signing method is per default automatically set to "Selectable"; that is, the signer will be able to choose whether to sign using a tablet, certificate, or both.
To design a document

1. 2.

Open the desired document in the relevant program like Microsoft Word. In each location where a signature field should appear in the PDF, insert a signature string in the document. Build the signature string using the relevant fields in Signature String Fields on page 41. The fields must be separated by commas, and the entire signature string must be enclosed in accent marks. Note: The signature string must be in one of the following fonts: any Base14 font, Arial, Courier, Courier-Bold, Courier-Oblique, Courier-BoldOblique, Helvetica, Helvetica-Bold, Helvetica-Oblique, Helvetica-BoldOblique, Times-Roman, Times-Bold, Times-Italic, Times-BoldItalic, Symbol, or ZapfDingbats. For example, the following signature string creates a signature field for user JohnS to sign. `sig,fd=Please sign this document, uid=JohnS, bio=1` The signature will be biometrically authenticated.

3.

Print the document to the installed SIGNificant Client printer. To do so, you must select the SIGNificant Client printer in the Print dialog box. The following things happen:

The document is converted to PDF format. The signature strings that you inserted during the design process are replaced by signature fields. SIGNificant Client opens displaying the document.

User Guide v2.0

41

Designing Documents

Table 3: Field sig

Signature String Fields Description Creates a signature field in the PDF. This field is mandatory. Example sig

fd

A free text description of the signature. The description cannot contain commas. After document circulation, the specified description will appear in the SIGNificant Client Description area. This field is optional.

fd=Please sign this document

uid

Indicates the signer's user ID. This field is optional.

uid=JohnS

bio

Indicates whether biometric authentication is required for this signature. This can have the following values: 0. Biometric authentication is not required. 1. Biometric authentication is required.

bio=1

The default value is 0. This field is optional. sq Indicates the order for signing the signature fields in the documents. If there are e.g. three signature fields with sq 1 to 3 SIGNificant Client allows stepping through the signature fields in the given order. Defines a custom field for the signature. You can use up to three custom fields and fill them with prefilled values. If you want to add more personal comments to your signature use the Custom Key field. ck defines the name of the custom key and ckv defines the value for the ck-field. ckv is optional. If it is not given, the user has to enter it in the signing dialogue in SIGNificant Client. The ck and ckv fields have to be numerated. sq=3

ck / ckv

ck1=mykey, ckv1=myvalue

User Guide v2.0

42

Designing Documents

sm

Defines the signing method for this signature field. This can have the following values: Ask (default): If you do not want to use a special signing method set Ask or just leave this field empty. Tablet: sign with Tablet Tablet_and_Certificate: Sign with Tablet and Certificate Stamp: only seal the document Stamp_and_certificate: seal the document including your personal certificate Stamp_and_tablet: Sign and seal the document Stamp_and_tablet_and_certificate: Sign, seal and include your personal certificate in the signature. Tabletpos: Use POS-dialogue to sign TabletPosInline: Use inline signing

sm=Tablet

Note: You need a Biometric Server for the Biometric Authentication.

User Guide v2.0

43

Chapter 7

Signing & Sealing Documents

This chapter explains how to sign & seal documents.

Signing Designed Documents

This procedure explains how to sign a document, in which the designer added you as a signer.
To sign a document

1.

Do one of the following:

To sign all signature fields that require your signature at once, right-click on your name in the tree, and then click Sign in the popup menu that appears.

To sign a specific signature field, do one of the following:

Right-click on the desired signature field in the tree and then click Sign in the popup menu that appears. Double-click on the desired signature field in the document,.

User Guide v2.0

45

Signing & Sealing Documents

The Signature dialog box opens displaying your name in the Signer field.

2. 3. 4.

(Optional) In the Reason drop-down list, select the reason you are signing the document. (Optional) In the Location field, type your location. If the Method drop-down list is enabled, choose the signing method you would like to use by doing one of the following:

To sign the document using a signature tablet, select Sign. A signing area appears at the bottom of the dialog box. For the digital signature the default certificate is used. To sign the document using a signature tablet and using a personal certificate e.g. on a token instead of the default certificate, select Sign & Certificate To sign the document using a visible stamp imprint, select Seal. All stamps available are listed at the bottom of the dialog box. For the digital signature the default certificate is used.

To sign the document using a stamp together with your personal certificate, select Seal & Certificate. To sign the document using a signature tablet and a stamp, select Sign & Seal. For the digital signature the default certificate is used.

User Guide v2.0

46

Signing & Sealing Documents

To sign the document using a signature tablet and a stamp together with your personal certificate, select Sign & Seal & Certificate.

If the Method drop-down list is not enabled, it means that the document designer already chose a signing method for you. The Method field displays the selected method. 5. The following things happen in the order below:

If the selected signing method contains Sign, the signing area is enabled. Sign the document using a signature tablet as follows: 1. Perform your signature on the signing pad. (The signing pad has to be connected to your computer)

2. 3.

Click Next. If the designer specified that your signature should be authenticated biometrically, SIGNificant Client connects to the SIGNificant Biometric Server and authenticates your signature. The SIGNificant Biometric Server's response appears below the signing area.

If the selected signing method contains Seal, a list with provided seal logos is provided. Do one of the following: 1. Choose a logo from the list

2.

Add a new logo by clicking the Add new logo button and choose any graphic located on your PC. (If the button is disabled, it means that this feature is restricted by your administrator) 47

User Guide v2.0

Signing & Sealing Documents

3.

After choosing a seal logo click on Next.

Note: As you can use any graphic located on your PC, you can use your wet signature on paper, scan it and add this scanned signature as additional stamp logo.

If the selected signing method contains Certificate, SIGNificant Client searches for valid digital certificates on your local machine. A list of certificates appears:

If no certificates appear, you must install a certificate first. For information, see Installing Certificates on page 19 Do the following: 1. Select the certificate you want to use for signing the document. The digital certificate can be stored on the local machine or on a connected device, such as a smartcard or token. If the certificate is stored on a connected device that is configured to require a PIN, you must enter the PIN each time you sign a field using this certificate. 2. 3. 6. (Optional) To view the selected certificate, click View Details. Click OK. The document is signed with the digital certificate. Your signature appears in the relevant signature field(s) in the document, along with the time and date at which you signed. The signature(s) in the tree. icon appears next to your name and

User Guide v2.0

48

Signing & Sealing Documents

User Guide v2.0

49

Signing & Sealing Documents

Signing Documents On the Fly

This procedure explains how to sign a document, in which the document designer did not add you as a signer or there was no document design process before.
To sign and/or seal document on the fly

1.

Click

or

depending if you want to sign or seal your document.

(The signing method can be changed afterwards unless the signing method is chosen by your administrator) A signature field appears in the document. 2. 3. Drag the signature field to the desired location in the document. Double-click on the signature field. The Signature dialog box opens. If you chose the Instant Signing button, then Sign is preselected as the Signing Method. If you chose the Instant Sealing button, then Seal is preselected as the Signing Method.

4. 5. 6.

In the Signer field, type your name. (Optional) In the Reason drop-down list, select the reason you are signing the document. (Optional) In the Location field, type your location. 50

User Guide v2.0

Signing & Sealing Documents

7.

In the Method drop-down list, choose which signing method to use by doing one of the following:

To sign the document using a signature tablet, select Sign. A signing area appears at the bottom of the dialog box. For the digital signature the default certificate is used. To sign the document using a signature tablet and using a personal certificate e.g. on a token instead of the default certificate, select Sign & Certificate To sign the document using a stamp, select Seal. All stamps available are listed at the bottom of the dialog box. For the digital signature the default certificate is used.

8.

To sign the document using a stamp together with your personal certificate, select Seal & Certificate. To sign the document using a signature tablet and a stamp, select Sign & Seal. For the digital signature the default certificate is used. To sign the document using a signature tablet and a stamp together with your personal certificate, select Sign & Seal & Certificate.

The following things happen in the order below:

If the selected signing method contains Sign, the signing area is enabled. Sign the document using a signature tablet as follows: 1. (Optional) To specify that your signature should be authenticated biometrically, select the Authenticate check box. This option is only available when a connection to the configured SIGNificant Biometric Server can be established. For further information on how to configure a Biometric Server ask your Administrator or read in SignificantOfflineClient_AdministratorGuide.doc. 2. Perform your signature on the signing pad.

If you selected Authenticate, SIGNificant Client connects to the SIGNificant Biometric Server and authenticates your signature. The SIGNificant Biometric Server's response appears below the signing area.

or 3. Click Next.

If the selected signing method contains Seal, a list with provided seal logos is provided. Do one of the following: 1. Choose a logo from the list.

User Guide v2.0

51

Signing & Sealing Documents

2.

Add a new logo by clicking the Add new logo button and choose any graphic located on your PC. (If the button is disabled, it means that this feature is restricted by your administrator). After choosing a seal logo click on Next.

3.

If the selected signing method contains Certificate, SIGNificant Client searches for a digital certificate on your local machine. A list of certificates appears.

User Guide v2.0

52

Signing & Sealing Documents

If no certificates appear, you must install a certificate. For information, see Installing Certificates on page 19. Do the following: 1. Select the certificate you want to use for signing the document. The digital certificate can be stored on the local machine or on a connected device, such as a smartcard or token. If the certificate is stored on a connected device that is configured to require a PIN, you must enter the PIN each time you sign a field using this certificate. 2. 9. Click OK. Your signature appears in the document, along with the time and date at which you signed. The icon appears next to your name and signature in the tree. (Optional) To view the selected certificate, click View Details.

User Guide v2.0

53

Signing & Sealing Documents

Signing documents by stepping through signature fields

SIGNificant Client allows the user to sign all signature fields created with a sigstring within a sq tag in exactly this order. That means users can design documents (see chapter Designing Documents in Other Programs) with sigstrings e.g. `sig,uid=tester1,sq=1` and `sig,uid=tester2,sq=2` to enforce a signing order.

Print such a document to the SIGNificant Client and click the button. SIGNificant Client will open the configured signing dialogue and starting with signing for user tester1. After capturing the signature and clicking OK the Client will automatically start the next signing dialogue for tester2. Along with e.g. the Inline Signing this creates a fast and comfortable way to sign a document in a given order.

User Guide v2.0

54

Signing & Sealing Documents

Clearing Signatures
You can clear (remove) specific signatures or all of a specific signer's signatures. Note: Clearing a signature does not remove the related signature field.
To clear a specific signature

In the tree, right-click on the desired signature field and click Clear Signature in the pop-up menu that appears. The signature is removed from the document, and the signature field. icon appears next to the

To clear all signatures for a signer

In the tree, right-click on the desired signer and click Clear Signature in the pop-up menu that appears. All of the signer's signatures are removed from the document, and the next to the signer and their signature fields. icon appears

User Guide v2.0

55

Signing & Sealing Documents

Options Menu
You can adjust the language of your SIGNificant Client Software, the date format of the signature and the signature layout.

On the top pane, click on MENU and in the drop down menu choose Options. The Options dialogue appears:

User Guide v2.0

56

Signing & Sealing Documents To adjust the appearance of the SIGNificant Client software

1. 2.

Choose the language you like from the drop down box. The default language is according to the regional settings of your operating system. In order to hide the design panel chooses the option Hide Design Panel. So the document panel will grow.

To adjust the signature layout

1. To choose a default certificate: a. Click The choose certificate dialog appears.

User Guide v2.0

57

Signing & Sealing Documents

b. Choose a certificate:

c. This certificate is used when the Signature Method is either Sign, Seal or Sign & Seal. (without the option to choose a personal certificate) In order to deselect the chosen certificate click on 2. Choose the date format you like from the drop down box. The time in your signature will appear in this format. Note: the time is shown in UTC (Coordinated Universal Time) and may different from your local time depending on your location / time zone. 3. Choose the signature layout from the drop down box

a. Standard: The handwritten signature is above the other signature elements and below the stamp imprint.

b. Simple: The handwritten signature is on top of the other signature elements.

User Guide v2.0

58

Signing & Sealing Documents

c. SignatureOverlay: The handwritten signature is on top of the other signature elements in a structured design.

d. SignatureOverlayRealSize: The handwritten signature is on top of the other signature elements in a structured design and the signature is not scaled to fit in the predefined size of the signature field. It is as large as the signer performed the signature in real size.

4. Choose if you would like to use the Click to verify link and if a border should be shown around the signature. Without the border the signature is transparent. Note: Only with the border and without the click to verify link the document will be PDF/A compliant. If this is necessary for you, please select the appropriate options. 5. Choose if signer, time, reason and location should be shown in the signature. See here some examples:

User Guide v2.0

59

Chapter 8

Continuing With the Signed Document

Saving Copies of a Document
You can save open documents at any stage, whether they are currently being designed, or are partially signed. Note: When saving a copy of the current document all signature fields which were added after the last signature are omitted. This is due to the fact that these empty signature fields are a change made to the document and will invalidate the previous signature. Use the save design button described later to explicitly save the document including new (and empty) signature fields.
To save a document

1. Click

2. The Save As dialog box opens. 3. Browse to the desired directory. 4. Type the desired file name. 5. Click Save. 6. The document is saved.

Sending an email with the signed document

You can send your document per email every time during the signing process or when all signatures are complete.
To email the document

1. 2. 3. 4.

Click

A new message in your standard email client opens having the signed document attached. Continue sending the email as usual. If the recipient is also using the SIGNificant Client he can continue signing and sealing the document.

User Guide v2.0

60

Continuing With the Signed Document

Printing the signed document

You can print a document at any time during the signing process or when all signatures are complete.
To print a document

1. 2. 3.

Click

The Print dialog box opens. In the Name drop-down list, select the desired printer. Click OK. The document is sent to the printer.

Add an attachment to the document

PDF documents offer the functionality to add attachments of any file type. Attachments which are PDF documents can also be attached as additional page. That means choosing another PDF document to attach enlarges your open document by the size of the attached one. All other files are attached as PDF attachment in a standard way. To attach a document

1. Click

A browse dialogue opens. 2. Choose the file you want to attach to the document and click Open. 3. In the Attachment dialogue choose if you want to add the file as additional page (only PDF documents) or as attached file. 4. Click OK The chosen file is attached to the document. When it has been attached as additional page you can view it in SIGNificant Client. Otherwise you can see the attachment in the Document Status Report or by opening the PDF document in Adobe Reader.

Closing SIGNificant Client

To close SIGNificant Client

Close the window. All your signatures are automatically saved. Unsigned signature fields are lost.

User Guide v2.0

61

Continuing With the Signed Document

Open signed documents in the Adobe Reader

All PDF documents created and / or signed with SIGNificant Client can be opened and viewed with the free Adobe Reader. If you havent chosen your personal certificate or configured an owned default certificate, all signatures applied will use the default SIGNificant Client Signing certificate. Since this certificate is issued by xyzmo for trial purposes, Adobe Reader doesnt trust this certificate per default. We strongly recommend replacing that certificate with your personal or your companys certificate. The purpose of the default certificate is to make things as easy as possible for you during the trial period. Once you decide to work with this product, especially in commercial environments, you should not use the default certificate. In case you want to continue working with this default certificate you have to perform the following steps in order to get a green checkmark next to your signature in the Adobe Reader. Add the SIGNificant Signing Certificate to your trusted certificates: 1. Open the signed document in any Adobe Reader 2. You will get a question mark (?) next to your signature. If you double-click it, Adobe indicates that the certificate used is not known. 3. Double-click the signature. 4. Choose Signature Properties 5. Click on Show certificate

7. Click on the Trust tab and choose Add to trusted Identities

User Guide v2.0

62

Continuing With the Signed Document

8. Then you will get the green checkmark next to your signature.

User Guide v2.0

63

Chapter 9

Troubleshooting
The following chapter is organized as an FAQ.

Installation Error: Error opening file for writing

During installation you may see this error if you have a product installed on your PC which also uses this DLL (e.g. the SIGNificant Online Client). In this case simply click on Ignore to continue. The installation will work fine.

User Guide v2.0

65