2003

8826 MEMORY HiCORDER

Recorders

Insulated 32-Channel Recording, paper width 10.4 inch

Network Recording Instrument for LAN

The 8826 MEMORY HiCORDER can now be connected to a LAN, and when used with a PC makes the ideal recorder for today's Internet-based environment. For use with the 8826, HIOKI provides a wide assortment of input units suitable for all types of signal measurement. The 8826 has a high waveform sampling rate of 1 M sample/s which is carried out for all 32 channels simultaneously. In addition, the 8826 supports multichannel recording with wide 10.4-inch recording paper, a memory capacity of 64 megawords for all 32 channels (when expansion memory is installed), and a color LCD.

Level Recorders Play a Vital

- Features q 10.4 inch color TFT display The large, bright display shows waveforms for all channels (32 analog + 32 logic channels) in 12 colors, allowing easy visual identification. The display also greatly facilitates operation of the unit. q Simultaneous measurement in up to 32 analog channels Featuring the highest number of input channels in this class, the 8826 lets you simultaneously record in 32 analog + 32 logic channels. All analog inputs are isolated. q Built-in MO drive (factory option) The internal MO (magneto-optical) disk drive can store up to 640 megabytes on a single disk. A floppy disk drive and type III PC card slot are provided as standard equipment. This makes it easy to archive measurement data. Besides its internal binary file format, the 8826 can also store data as ASCII files and display screen shots as BMP files. q Large-capacity memory In the standard memory configuration, the 8826 can store a total of 16 mega-words. With expansion memory installed, capacity is a full 64 mega-words. This provides for up to 2 mega-words per channel when 32 channels are used. Even with high-speed sampling, long-term recording is possible. q CE Mark compliant Complies with the EC directive determining safety standards in Europe (within the EU). q Internal sampling rate of 1 MS/s, 500 kS/s external sampling rate The A/D converter that digitizes measurement signals operates at the high sampling rate of 1 M sample/s (1 sec cycle). Resolution for the voltage axis is 12 bits. Sampling is carried out for all channels simultaneously. q Converts to text file used with a Wave viewer
(supplied accessories, PC application software)

To open measurement data in PC applications such as Excel, the data must be converted to text data in the CSV format. The PC application software which comes standard in the package enables easy operation. q Connects to PCs and printers on a LAN network Its use with PCs can be selected according to the usage. It allows remote operation and data transfer via LAN connection, GP-IB connection, or RS-232C connection. External MO drive connected via an external SCSI interface is also possible. q On-screen help Explanation of button operations and many basic operations can be displayed on the screen with the provided online help function. q Plug-in slots enhance versatility The number of measurement channels can be matched to the application requirements by using plug-in modules. New types of converter amplifiers and other accessories to be introduced in the future will allow direct measurement of various physical quantities.

A LAN-Connectable Recorder! Digitally Process Test Data

With a conventional pen recorder, even if all test data is written on the paper, usually only a small portion of the data is needed. However, to look for just a small important part requires very extensive search of the recording paper. 8826 MEMORY HiCORDER stores and manages all waveform measurement data electronically. Furthermore, use of a LAN card and 9333 LAN COMMUNICATOR enables high-speed data file transfer to PCs on a network.
Example of using measurement data in Excel

Role in Many Areas of Modern Industry

- Application Load shutdown tests in power generation plants
For load shutdown tests in power generation plants, the pre-trigger function can be used to measure and record waveforms before and after the test, enabling accurate analysis. The vernier function, which can be used to perform fine adjustment of amplitudes, is also a useful tool.

s Load shutdown test

Analysis of the relationship between the generator voltage, rotation speed regulation, governor servo operation condition, and the open and close timing of the pressure regulator before and after load shutdown can be performed.

Plant maintenance
In plants, memory recorders are used to measure and record the operation of solenoid and control valves. Since the 8826 MEMORY HiCORDER can simultaneously create X-Y plots, the relationship between flow and valve lift can also be observed.

s Recording of motor rush current

The rush current occurring when the power to a motor or a relay is turned on can be accurately measured as a waveform.

Failure monitoring of the hydraulic machine

Through the use of the MEMORY HiCORDER, pressure waveforms can be measured and recorded simultaneously at various points of hydraulic machines to determine whether such machines are operating normally. The scaling function allows the user to directly read pressures.

Research and development of automobiles

In the vehicle and engine running tests, the relationship among various parameters must be examined. Multichannel recorders are specifically necessary to do so.

(WIDE mode, actual size)

B4 size paper (264 mm width) allows full-size mixed printing or division into up to 16 sections

High-Speed Response for Capturing Transient Events

- Function Details -

Large memory capacity allows long-term recording of high- speed data

In the standard configuration, the 8826 can store a total of 16 mega-words, and with memory expansion 64 mega-words, using internal solid-state memory. This provides ample capacity to store data for all 32 channels. The table at right shows possible recording times, according to the time axis setting and the number of channels in use. A reduction in the number of channels prolongs the recording time.
* The table applies to the standard memory configuration. When the optional 9599 MEMORY BOARD is installed, recording times are extended by a factor of 4 (from 16 mega-words/channel, 160000 divisions for 4 channels to 2 mega-words/channel, 20000 divisions for 32 channels).
CH 1 A/D conversion Input voltage Write on memory Thermal printer Insulation

Function outline of memory recorder

CH 32

A/D conversion Input voltage Input waveform

Insulation

Input voltage

Sampling period Time

Output waveform

s Memory segmentation function

When using the memory recorder function, the data memory can be divided into a maximum of 255 blocks. Data can be written sequentially to the memory blocks, and the waveform in a reference block and any other block can be superimposed and compared.
* In the standard memory configuration (16 mega-words), the maximum number of blocks using the 32 channel setting is 127. When the memory expansion is installed, or when the channel setting is 4 to 16, the maximum number of blocks is 255.
Recording length using 16 channels Segmentation Segmentation into 3 blocks 32 ch 32 ch

Time axis 100 s /DIV 200 s /DIV 500 s /DIV 1 ms /DIV 2 5 10 20 50 100 200 500 1 s /DIV 2 5 10 30 1 min /DIV 2 5

Segmentation into 127 blocks

32 ch

Sampling period 1 s 2 s 5 s 10 s 20 s 50 s 100 s 200 s 500 s 1 ms 2 ms 5 ms 10 ms 20 ms 50 ms 100 ms 300 ms 0.6 s 1.2 s 3.0 s

4-channel setting 4 MW/channel, 40000 divisions

32-channel setting 500 kW/channel, 5000 divisions

4s 8s 20s 40s 1m 20s 3m 20s 6m 40s 13m 20s 33m 20s 1h 6m 40s 2h 13m 20s 5h 33m 20s 11h 6m 40s 22h 13m 20s 2days 7h 33m 20s 4days 15h 6m 40s 13days 21h 20m 27days 18h 40m 55days 13h 20m 138days 21h 20m

0.5s 1s 2.5s 5s 10s 25s 50s 1m 40s 4m 10s 8m 20s 16m 40s 41m 40s 1h 23m 20s 2h 46m 40s 6h 56m 40s 13h 53m 20s 1day 17h 40m 3days 11h 20m 6days 22h 40m 17days 8h 40m

s Zoom function

*In memory recorder function

To make the most of the large-capacity memory, it is possible to display a compressed waveform simultaneously with a magnified waveform. Since the 8826 is capable of storing a large amount of data, high-speed sampling is also possible for waveforms with a long duration. Accordingly, while observing the compressed image of the entire waveform, it is also possible to observe the magnified details of desired parts. Compressed display of a part of the entire waveform is also possible.

s Clock input for external sampling

*In memory recorder function

The sampling rate for the memory recorder can be controlled by the timing of an external clock signal. This is useful for example to collect data synchronized to the running cycle of an engine. s

Cursor measurement function

Input waveform

Using two cursors on the display screen, it is possible to read out time differences or voltage differences.

Maximum frequency 500 kHz

Input voltage

Sampling controlled by external clock signal

Sampling period Time

- Function Details -

Real time save function *supported in version 2.20 or later, 9598 required
The real time save function enables data to be saved to the internal MO while waveform is being measured. The compressed waveform is displayed on the screen at real time. This function is valid at the recorder and memory function. Write to the internal MO can be up to 1kS/s (= 100ms/DIV) for 16 channels, or up to 500S/s (200ms/DIV) for 32 channels. With the real time save function, data measured at the pre-determined sampling below the maximum sampling can be saved to the MO at any time. In addition, since the same data is compressed along the time axis and displayed on the screen, you can check how recording is going. Compressed data is saved to the MO for later retrieval.

Maximum continuous recording time using 230 MB/640 MB MO disk

(with 9599 MEMORY BOARD expansion)

MEM Time axis 100 ms /DIV 200 ms /DIV 500 ms /DIV 1 s /DIV 2 s /DIV 5 s /DIV 10 s /DIV 30 s /DIV 1 min /DIV 2 min /DIV 5 min /DIV

Sampling period 1 ms 2 ms 5 ms 10 ms 20 ms 50 ms 100 ms 300 ms 600 ms 1.2 s 3.0 s

230MB MO

640MB MO

1h 58m 51s 3h 58m 50s 4h 57m 9h 53m 50s 19h 47m 2days 1h 22m 30s 4days 2h 28m 20s 12days 4h 10m 23days 23h 46days 10h 106days 2h 40m

5h 30m 52s 5h 30m 50s 13h 46m 55s 1day 3h 33m 30s 2days 7h 5m 5days 17h 29m 10s 11days 10h 11m 40s 33days 21h 35m 66days 17h 129days 6h 208days 8h

Note: Saved at 16 channels for 100 ms/DIV, or at 32 channels otherwise.

Storage data (MEM waveform) : Save measurement data to MO at real time

Time axis setting(MEM): 100 ms/DIV to 5 minutes/DIV (sampling frequency starting from 1 kS/s for 16 channels or from 500 S/s for 32 channels) Recording length setting (MEM): depending on free capacity of MO disk

Input waveform

Storage data (REC waveform) : Save compressed data to MO after measurement

Time axis setting(REC): 500 ms/DIV to 1 hour/DIV (sampling frequency starting from 1 kS/s for 16 channels or from 500 S/s for 32 channels) Recording length setting (REC): up to 1000 DIV (or up to 5000 DIV with memory expansion)

Display data (REC waveform): compressed waveform is displayed on screen Compressed data is saved temporarily in the internal memory.
However, display time axis of REC data is 2 steps later than that of MEM data. The maximum recording time that can be set is determined by the free capacity of the MO disc, and the time axis and recording length of MEM/REC. Nevertheless, since the maximum recording length of REC is fixed at 1000 DIV, or 5000 DIV if there is memory expansion, even if there is plenty of free capacity on the MO disc, the recording time cannot exceed the value determined by REC time axis multiplied by 1000 DIV.

Trigger functions capable of monitoring all 32 channels For all of the measurement functions, including record and memory recorder, triggers can be set on all 32 channels. In addition to a simple level trigger based on comparison with a single voltage value, the following trigger functions are also available:
Window trigger based on 2 voltage values Voltage drop trigger for AC power lines Level trigger based on rms values Cycle trigger monitoring the rising edge of a voltage Pattern trigger monitoring the Hi/Low condition of a logic signal

EXT trigger Analog CH 1 Logic A Trigger sources Analog CH 32 Logic D AND/OR Timer MANUAL trigger Trigger levels

Effective value level trigger Level trigger

Window trigger

Voltage-drop detection trigger

Period detection trigger

Logic pattern trigger

- Function Details -

Support for connection to PCs via Ethernet

The 8826 can be connected to Ethernet, a standard network protocol in the Internet age (using the optional LAN CARD/HIOKI-tested and 9333 LAN COMMUNICATOR). For those who frequently analyse measurement data on PCs, this function offers a good match. Also, connection to PCs using RS-232C connection or GP-IB connection is possible (using the optional 9557 RS-232C CARD and 9558 GP-IB CARD ) . 8826 data can be sent to PCs or be remotely controlled from PCs.
* Because LAN card, GP-IB card, and RS-232C card all use the same PC card slot of 8826, when one of them is inserted into the PC card slot, then any memory card (SRAM, flash ATA, or hard disk card) cannot be used at the same time.

s Connect HiCORDER to departmental LAN

(using TCP/IP communication protocol)

Ethernet

Copy or remote operations of HiCORDER data files from client PCs running 9333 (software)

Color image output to the network printer

s Save data to network server

Advantages of Ethernet and TCP/IP Connected Systems
q Data transfer speed is faster than MO write speed. q Cable length may be up to 100 meters using 10Base-T. q Data can be used immediately by an application program

(using TCP/IP communication protocol)

on the PC (9333 LAN COMMUNICATOR).

q Less susceptible to errors compared with RS-232C
PC running 9333 (software) Ethernet

communications, and faulty data is automatically resent. q Installation costs at the PC side are lower than GP-IB.
Disadvantages of Ethernet and TCP/IP Connected Systems
q Transfer time depends on network usage, because the

network is shared with other LAN devices.

q Transfer time between other devices on the LAN may be

affected, depending on the amount of data transferred from the recorder.

Copy measurement data files obtained from HiCORDER to PC on network

Offline data exchange with PCs

The supplied waveform viewer (PC application) can convert saved waveform data to text files (CSV format). For data storage, MO (optional installation at factory) can also be used, in addition to FD/PC card (supplied as standard). This allows easy offline data exchange with PCs. Apart from the built-in MO unit, addition of external MO drive via the SCSI interface (supplied as standard) for connection is also possible. (External hard drive,
however, is not supported.)

Memory / main unit

Floppy disk Memory / main unit

MO disk (option)

Memory / main unit Flash-ATA PC card

* In addition to HiCORDER's read/write native file (binary format), data can also be saved to text files (CSV format) which can be opened by PC spreadsheet applications, or waveform bitmap files (BMP format). However, because data saved in text files cannot be read by HiCORDER, it is recommended that text data conversion be performed on PCs.
Approx. Display Input Voltage Upper Limit Value Variable Lower Limit Value

Scaling Functions
Actual measurements usually involve parameters other than voltage. Various physical parameters such as speed, vibration and temperature commonly need to be recorded, and this signal data should be directly readable, without having to be manually converted. In such measurement conditions, the scaling function can be used to automatically convert to the desired parameter value. Additionally, waveform amplitude can be adjusted using the Variable Gain function. In addition, if accurate input voltage amplitude measurement is not required, the amplitude can be intentionally modified with the Vernier Adjustment function.
Scaling

Variable OFF

Variable ON

Shrink Vernier

Expand

- Function Details -

FFT analysis functions

FFT capability includes single-signal FFT for analyzing frequency components, two-signal FFT for transfer function analysis, and octave analysis for acoustic analysis. The source signal can be selected from waveform data captured by the memory recorder, and isolating required sections is also possible. (Number of data points: 1000 to 10000)

Time domain

Frequency domain

Function outline of recorder (REC)

The input signal is converted to digital form and displayed and printed in real time. The maximum chart speed is 20 mm/s (in the 500 ms/division range). After the end of measurement, measurement data for the last 2000 divisions *1 are still in memory and can be viewed with the back-scroll function or printed out again.

Recording paper

*1 When the memory expansion is installed, the maximum recording length for reprinting is prolonged. In the standard configuration, recording length is 2000 divisions. With memory expansion, it is 10000 divisions.

2000 DIV divisions in memory

Effective value (RMS) recorder function

This function is designed exclusively for use on 50/60 Hz power supply lines and DC. High-speed sampling is applied to calculate the rms value from the waveform data *2, and the result is recorded as a graph.
*2 Using fixed 200 s sampling, data for two waveforms are captured for calculating the rms value. This process is repeated 20 times per second, resulting in high-speed response that is 10 times faster than that of a digital tester or similar (using a 2-second update rate).
100 V power line waveform

Chart of Recorder function

Chart of RMS recorder function

Simultaneous execution of up to 16 mathematical functions * In memory recorder function Available waveform processing functions include all arithmetic operations as well as differentiation, integration, and other functions whose results can be displayed as waveforms. Up to 16 functions can be set. Waveform parameter processing * In memory recorder function
13 types of parameters such as maximum value and minimum value can be selected for processing. For simultaneous operation in all 32 analog channels, up to 4 parameters are possible.

Waveform evaluation * For memory recorder and FFT analysis functions

After defining a reference waveform bounding area, it is possible to check whether waveforms go outside this reference area. As opposed to simple level-based triggering, even complex waveforms can be evaluated quickly and reliably, because both the level direction and the time axis direction are taken into consideration.
* Registered patent No. 2028013 in Japan

Simultaneously record in 32 analog + 32 logic channels

Record the relation of many phenomena

Example of X-Y plotting

Time-axis waveforms of each input channel can be defined on vertical and horizontal axes to create X-Y plots.

Example of Logging output

This prints the instantaneous numerical value for each sample.

Example of B4 report output

Screen image output at high resolution, B4 size.

Example of color printout

Connected to a standard color printer, the 8826 can produce color or monochrome A4 size printouts (using separately available 9559 PRINTER CARD, corresponding to ESC/P and ESC/P raster standard)

s Online help and error indication

Simply pressing the help key will bring up relevant information on functions and operation steps. If an error has occurred, the reason for it is also displayed to ease operation.

Select the Input Module for Your Application

- Product Specifications (accuracy at 23 5C/ 73 9F is guaranteed for 1 year)

8826 MEMORY HiCORDER Basic Specifications

Measurement functions Input type and number of channels Maximum sampling rate Memory capacity (1) Memory recorder, (2) Recorder, (3) RMS recorder (50/60 Hz/ or DC only), (4) Recorder & Memory, (5) FFT function Plug-in input modules 32 analog + 32 logic / 32 logic channels are standard in main unit
* Isolated analog channels, isolated input and frame, logic has common GND.

Memory Recorder Function

Time axis Sampling period External sampling Recording length Pre-trigger 100 s to 5 minutes/ division (100 samples/ division), 20 settings, External sampling (number of sampling points/division, desired setting), Time axis zoom 2 to 10; 3 settings Compression 1/2 to 1/10000: 12 settings 1/100 of time axis ranges (minimum sampling period 1 s) Max. 500 kS/s (minimum sampling period 2 s) Settable in 1-division steps, 25 to 40000 divisions*
* Depending on the number of channels in use and amount of installed memory. With memory expansion max. 160000 divisions

1 M sample/s (1 s period)
* Simultaneous sampling for 32 analog + 32 logic channels

12 bits 4 mega-words/channel (4 channels used) to 12 bits 500 kilo-words/channel (32 channels used)
* Memory capacity can be expanded 4 times. Floppy disk drive 1: 1.44 M/1.2 M/720 KB, MS-DOS format Type III PC card slot 1: For SRAM cards up to 32 MB, flash ATA or hard disk cards up to 528 MB. Magneto-optical drive (option) 1: 640/ 540/ 230/ 128 MB/ over write media support File format : Binary, text, BMP

Can record data from before the trigger point, 0 to 100% or -95% of recording length; 15 settings

Other functions

File storage

Waveform processing, waveform parameter processing, waveform averaging, memory segmentation (max. 255 segments), logging (numerical printout), X-Y waveform plot, voltage axis zoom 2 to 10; 3 settings, compression 1/2, zoom, variable display, graph superimposition

Recorder Function
Time axis Sampling period Recording length X-Y sampling period X-Y axis resolution 20 ms to 1 hour/ division: 16 settings, 1 division = 100 samples, time axis compression 1/2 to 1/500: 8 settings
* 20 ms to 200 ms/ division ranges shown on display. Printout speed is 20 mm/ s.

Battery backup External control connector Interface (standard)

Clock and settings, battery life approx. 10 years (at 25C/ 77F) Terminal block: trigger input/ output, external start/ stop, print input, waveform judgment output, external sampling input. SCSI: for MO drive connection
* Please contact HIOKI for information on compatible MO drives.

1 s to 100 ms: 6 settings (selectable from 1/100 or less of time axis) Settable in 1-division steps, 25 to 2000 divisions*1, "continuous"*2, only continuous for X-Y plotting
*1 With memory expansion: max. 10000 divisions *2 When time 10 ms to 200 ms/ division and printer is ON, continuous is not available.

Connector type: Shielded 50-pin high-density type. (D-sub half pitch)

GP-IB, RS-232C, LAN, external printer (PC-AT Centronics, Interfaces (option)

ESC/P, ESC/P raster) * Use one of the following: 9557 RS-232C CARD, 9558 GP-IB CARD, LAN CARD (HIOKI-tested), 9559 PRINTER CARD

500 s; fixed (dot), 500 s to 18 ms (line) 20 dots/ division (display), 80 dots (horizontal) 80 dots (vertical)/ division (printer) Reprinting of stored data (last 2000 divisions), logging (numerical printout), virtual recording (data are written to internal memory without the use of printer paper), additional recording (recording is resumed without overwriting previous data), voltage axis magnification 2 to 10; 3 settings, compression 1/2; 1 setting, variable display.

Environment conditions (no condensation)

Operation: +5C/ 41F to +40C/ 104F, 35% to 80% rh Storage: -10C/ 14F to +50C/ 122F, 20% to 90% rh 100 to 240 V AC (50/ 60 Hz) Other functions

Power requirements

Power consumption
(with 8936 full loaded)

300 VA max. (at 100 V AC) (approx. 100 VA with printer OFF)

RMS Recorder Function (for 50/60 Hz and DC)

Time axis 5 s to 1 h/division: 9 settings, time axis compression 1/2 to 500: 8 settings 200 s fixed (20 rms data/ s) Sampling period

Dimensions and mass Supplied accessories

Approx. 401 (15.79) W 235 (9.25) H 382 (15.04) D mm (inch) approx. 11 kg/ 388.0 oz (main unit only) Power cord (1), printer paper (1), protective cover (1), roll paper attachment (2), PC card protector (1), Wave viewer software (1)

RMS calculation accuracy 3 % f.s. Recording length Settable in 1-division steps, 25 to 2000*1 divisions, continuous
*1 With memory expansion: max. 10000 divisions

Recording and Display Section

Printer paper Recording width Paper feed density Recording speed Display method 264 mm (10.39 inch) 30 m (98.4 feet), thermal paper roll 20/ 24 divisions for full scale, 1 division = 10 mm (0.39 inch) (80 dots) 10 rows/mm (250 rows/ inch), 20* rows/mm (500 rows/ inch)
*with the memory recorder's smooth print function

Other functions

Reprinting of stored data (last 2000 divisions), logging (numerical printout), additional recording (recording is resumed without overwriting previous data), voltage axis magnification 2 to 10; 3 settings, compression 1/2; 1 setting, variable display.

Auxiliary Functions
General Printing of settings including input range, trigger time, etc, cursor measurement, scaling, comment input, screen hard copy, start condition retention, auto setup, auto saving, remote control, auto ranging, view function, online help, key lock, list printing, level monitor function. Scaling: Translation of amplitude gradation only Variable: Arbitrary setting of the upper and lower limit of the waveform display range Allows precision adjustment of input voltage. Type: Area judgment using reference waveform for time axis waveform, X-Y plot, or FFT display. Parameter judgment for waveform parameter processing. Judgment output: pass/fail output, open-collector 5 V voltage output Average value, effective (rms) value, peak to peak value, maximum value, time to maximum value, minimum value, time to minimum value, period, frequency, rise time, fall time, area value, X-Y area value, and standard deviation.
(Maximum possible calculation up to 1000 DIV, with memory expansion max. 5000 divisions; accuracy is within the tolerance of the input module, 16 simultaneous operations)

Max. 25 mm/ s (0.98 inch/ s) 10.4 inch TFT color LCD, with English/ Japanese selector
* 640 480 dots

Scaling Vernier function Waveform judgment function

(Memory recorder) (FFT)

Trigger Function
Trigger source CH1 to CH32 (analog), CHA to CHH (logic), external, timer, manual (either ON or OFF for each source), logical AND/ OR of sources Level: Digital setting of voltage. Triggered when set value is exceeded in UP or DOWN direction. Window: When entering or exiting a level range defined by upper or lower limit Voltage drop: Only for AC power lines. Triggered when the peak voltage falls below setting value RMS level: Only for DC and AC power lines. Triggered when rms value crosses set value in UP or DOWN direction Period: When rising or falling edge of set voltage does not fall within cycle range

Waveform parameter calculation

(Memory recorder)

Trigger types (Analog)

Level setting resolution Equivalent to 0.25 % when full scale is set to 20 divisions Trigger types (Logic) Pattern trigger: 1, 0, or (disregard), logical product (AND) or logical sum (OR) set for 4 channels

Waveform processing Four arithmetic operations, absolute value, exponentiation, calculations common logarithm, square root, moving average, (Memory recorder) differentiation once and twice, integration once and twice, parallel displacement along the time axis

CE mark compliance
Applicable standards Safety: EN61010 EMC: EN55011, EN50082

9
Thermal printer (264 mm width monochrome recording paper) logic probe connection Operation buttons Input module slots (for 16 modules) Top side

Type III PC card slot

PC card type LAN, GP-IB and RS-232C interface cards and printer card for connection to a printer can be inserted here. * These interface types are options. A memory card can also be used with this slot. Compatible with SRAM, flash ATA, HD cards.

Floppy disk drive Waveform monitor (10.4" color TFT LCD) MO drive (option)

External control connector AC inlet

* Commercially available flash and HD cards can be used.

SCSI interface

s Options (sold separately)

External dimensions: Approx. 401 (15.79) W 235 (9.25) H 382 (15.04) D mm (inch) Mass: Approx. 11 kg/ 388.0 oz (main unit only)
Input Dimensions and mass:
Approx. 170 (6.69) W 20 (0.79) H 148 (5.83) D mm (inch), approx. 290 g (10.2 oz)
8936, 8938

8936 ANALOG UNIT (accuracy at 23 5C/ 73 9F after 30 min of warm-up time; accuracy guaranteed for 1 year)
Number of channels: 2, Connector: Insulated BNC
* Input isolated from output, inter-channel isolation

Recorder & Memory Function Functions to be added, (version 2.00 or higher)

Time axis (real-time recorder) Time axis (memory recorder) 20 ms to 1 hour/division; 16 settings, 1 division = 100 samples, time axis compression 1/2 to 1/500, 8 settings
* Sampling period 1/100 of time axis range on memory function

Measurement range Maximum sampling rate Accuracy Zero-position

Input resistance and capacitance

5 mV to 20 V/ division, 12 ranges, full-scale (f.s.) = 20/ 24 divisions, AC voltage for possible measurement/ display using the memory function : 335 V rms, Low-pass filter, 5/ 500/ 5 k/ 100 kHz, the measurement resolution is 1/80 of range * When used with 8826 1 MS/s (simultaneous sampling of two channels) DC amplitude: 0.4 %f.s. Zero-position: 0.1 %f.s. -50 % to 150 %, 1 % step
* With zero-adjustment function

100 s to 5 minutes/ division; 20 settings, 1 division = 100 samples, time axis zoom 2 to 10; 3 settings, compression 1/2 to 1/10000, 12 settings
* Sampling period 1/100 or less of time axis range (min. 1 s)

Recorder: 25 to 1000*1 divisions, continuous Recording length

expansion max. 5000 divisions
2
2

*1 With memory

Memory recorder: 25 to 2000* divisions * With memory expansion max. 10000 divisions (Arbitrary setting in 1-division steps also possible.) Recorder: timer trigger, OFF Memory recorder: CH1 to CH32 (analog), logic A to H, external trigger Only recorder waveform is output when printer output is started, reprinting of stored recorder waveform data (last 1000* divisions)

Frequency characteristics DC to 400 kHz 3 dB, with AC coupling: 7 Hz to 400 kHz 3 dB 1 M, 30 pF approx. (at C 100 kHz) DC, GND, AC 400 V DC (upper voltage which when applied to between input pins does not damage them) 370 V AC, DC (upper voltage which when applied to input channel casing or between input channels does not damage them) None
* The input cord is optional

Trigger source

Input coupling Max. allowable input Max. rated voltage to earth Accessories

Other functions

* With memory expansion 5000 divisions

Additional recording function (recording is resumed without overwriting previous data), variable display

Real-time save Function Functions to be added, (version 2.20 or higher)

Time axis (REC: recorder) Time axis (MEM: memory recorder) Recording length Waveform monitor Trigger source Waveform memory (on semiconductor memory of main unit) Storage media Saved contents in MO disk 500 ms to 1 hour/ DIV; 12 settings (less than 16 ch), 1 s to 1 hour/ DIV; 11 settings (less than 32 ch), 1 DIV = 100 samples, * Sampling period 1/100 of time axis range at MEM 100 ms to 5 minutes/ DIV; 11 settings (less than 16 ch), 200 ms to 5 minutes/ DIV; 10 settings (less than 32 ch), 1 DIV = 100 samples, * Sampling period 1/100 of time axis range Recorder: 25 to 1000*1 divisions, continuous * With memory
1

8938 FFT ANALOG UNIT (accuracy at 23 5C/73 9F, 30 minutes after power-on; accuracy guaranteed for 1 year)
Anti-aliasing filter Other functions Accessories Cutoff frequency 20, 40, 80, 200, 400, 800, 2k, 4k, 8k, 20k, 40 kHz auto-select (linked to frequency range) Same as the 8936 ANALOG UNIT None
*Input cord is optional

expansion max. 5000 divisions

Memory recorder: depending on free capacity of MO disk Switching of recorder/ memory recorder, and fixing recorder waveform during measurement Timer trigger For MEM waveform, the last 2000 DIV portion (or 10000 DIV if there is memory expansion) of data is saved to the semiconductor memory of the main unit, enabling reversed scroll monitoring and re-printing. MO disk, drived by 9598 MO UNIT (factory option) 640 MB, 540 MB, 230 MB, 128 MB MEM waveform data (Real-time save data), REC waveform data (Compressed data), Index file

Dimensions and mass:

Approx. 170 (6.69) W 20 (0.79) H 148 (5.83) D mm (inch), approx. 300 g (10.6 oz)

8937

8937 VOLTAGE/TEMPERATURE UNIT (accuracy at 23 5C/ 73 9F, 60 minutes after power-on; accuracy guaranteed for 1 year)
Number of channels: 2 each for voltage and temperature

Inputs

* Input isolated from output, inter-channel isolation

Voltage input: isolated BNC, thermocouple input: plug-in terminal

500 V to 2 V/ division; 12 settings, full-scale (f.s.) = 20/ 24 Voltage measurement divisions, low-pass filter: 5/ 500/ 5 k/ 100 kHz, the measurement range resolution is 1/80 of range * When used with 8826 Temperature measurement range 10 C to 100 C/ division; 4 settings, full-scale (f.s.) = 20/ 24 divisions, low-pass filter: 5/ 500 Hz, measurement resolution: 1/80 of range * When used with 8826 K: -200 to 1350 C, E: -200 to 800 C, J: -200 to 1100 C, T: -200 to 400 C, N: -200 to 1300 C, R: 0 to 1700 C, S: 0 to 1700 C, B: 300 to 1800 C, Reference junction compensation: internal/ external (switchable) Voltage input: 1 MS/s, Temperature measurement: 4 kS/s
(2-channel simultaneous sampling)

FFT Functions Functions to be added, (version 2.00 or higher)

1 Signal analysis 2 Signal analysis Analysis channels Frequency range Number of sampling points Window functions Linear spectrum, RMS spectrum, power spectrum, autocorrelation, histogram, octave analysis Transfer function, cross-power spectrum, cross-correlation function, impulse response, coherence function 1 or 2 selected channels out of all analog channels 133 mHz to 400 kHz, resolution 1/400, 1/800, 1/2000, 1/4000 1000, 2000, 5000, 10000 points Rectangular, Hanning, Exponential

Thermocouple range

Max. sampling rate

Accuracy

Voltage input: DC amplitude 0.4% of f.s. Zero-position 0.15% of f.s. Temperature measurement (K, E, J, T, N): 0.1% of f.s. 1C, 0.1% of f.s. 2C (-200 to 0C), (R, S): 0.1% of f.s. 3C, (B): 0.1% of f.s. 4C (400 to 1800C) Reference junction compensation accuracy: 0.1 % f.s. 1.5 C (internal compensation) Voltage input: -50 % to 150 %, 1 % steps * With zero-adjust function Temperature measurement: -100 % to 100 %, 1 % steps

Wave viewer (Wv) software (Supplied accessories, added from Aug. 2000)
Simple display of waveform files, Converts binary files to text files; CSV/space/tab pause selectable, a selection can be specified and thinning enabled. Display format settings: scroll function, enlarge/reduce display, display CH settings Trace the voltage value, jumpe to the point of cursor/trigger, etc., Windows 95/98/Me, Windows NT 4.0 (OSR3 or later)/2000

Zero position

Functions

Voltage input: DC to 400 kHz + 1/-3 dB Frequency characteristics Temperature measurement: DC to 1 kHz + 1/-3 dB Input resistance and capacitance Input coupling Max. allowable input Max. rated voltage to earth Accessories Voltage input: 1 M, 50 pF approx. (at C 100 kHz) Temperature measurement: 5.1 M DC, GND, AC 30 V rms or 60 V DC
(upper voltage which when applied to between input pins does not damage them)

Operating environment

30 V rms or 60 V DC None

(upper voltage which when applied to input channel casing or between input channels does not damage them) * The input cord is optional

10

Dimensions and mass:

Approx. 170 (6.69) W 20 (0.79) H 148 (5.83) D mm (inch), approx. 250 g (8.8 oz)

8939

8939 STRAIN UNIT (accuracy at 235C/ 739F, 60 minutes after power-on; accuracy guaranteed for 1 year)
Inputs Converter connector Suitable converter Measurement range Maximum sampling rate Accuracy (after auto-balancing) Balancing Zero position Number of channels: 2, Connector: Adapter cable connector
* Input isolated from output, inter-channel isolation

Via adapter cable, TAJIMI PRC03-32A10-7F10.5 Strain gage converter, bridge impedance: 120 to 1 k, gage factor 2.00, bridge voltage 2 0.05 V 20 to 1000 / division; 6 settings, full-scale (f.s.) = 20/ 24 divisions, low-pass filter: 10 Hz, 30 Hz, 300 Hz, 3 kHz, OFF the measurement resolution is 1/80 of range * Using 8826 1 MS/s (simultaneous sampling for 2 channels) DC amplitude: (0.5 %f.s. +2 ) Zero-position: 0.5 %f.s. Electronic auto-balancing, max. adjustment range 10000 -50 % to 150 %; in 1% steps
* With auto-balancing

Frequency characteristics DC to 20 kHz +1/-3 dB 10 V (DC + AC peak) Max. allowable input (upper voltage which when applied to between input pins does not damage them) Max. rated voltage to earth Accessories
9318

30 V rms or 60 V DC Conversion cable (2)

(upper voltage which when applied to input channel casing or between input channels does not damage them)

Dimensions and mass:

Approx. 170 (6.69) W 20 (0.79) H 148 (5.83) D mm (inch), approx. 310 g (10.9 oz)

8947

9318 CONVERSION CABLE

(to connect the clamp-on sensor to the 8940) (to connect only the 3273 to the 8940)

9319

9319 CONVERSION CABLE

8947 CHARGE UNIT (accuracy at 23 5C/ 73 9F after 60 min of warm-up time; accuracy guaranteed for 1 year)
Number of channels: 2
8940

Dimensions and mass:

Approx. 170 (6.69) W 20 (0.79) H 148 (5.83) D mm (inch), approx. 300 g (10.6 oz)

Input

Measurement objects can be selected individually for each channel. Full isolation between inputs, and between inputs and recorder. Common GND for voltage input and charge input channels.

Voltage and pre-amplifier internal inputs: BNC terminals

(With voltage input: input resistance, 1 M ; input capacitance, less than 200 pF)

8940 F/V UNIT (accuracy at 23 5C/ 73 9F after 30 min of warm-up time; accuracy guaranteed for 1 year)
Input Sensor connector terminal
Compatible current sensors

Number of channels: 2*1, Voltage input: BNC terminal

*1 Input isolated from output, inter-channel isolation

Charge input: miniature connector (#10-32 UNF) Suitable converters Charge input: piezoelectric charge output acceleration pickup sensors, Internal pre-amplifier input: acceleration pickup sensors with built-in pre-amplifier
50 m (m/s2)/DIV to 10 k (m/s2)/DIV, 12 ranges 6 types, the measurement resolution is 1/80 to 1/32 of range (changes according to measurement sensitivity) Measurement sensitivity: 0.1 to 10 pC/ (m/s2), Pre-amplifier internal input measurement sensitivity: 0.1 to 10 mV/ (m/s2), Amplitude accuracy: 2 % f.s., Frequency characteristics: 1 to 50 kHz +1/ -3 dB, Low-pass filter: 500 / 5 kHz, Pre-amplifier driving power supply: 2 mA 20%, +15 V 5%, Highest input charge : 500 pC (high sensitivity side 6 ranges), 50000 pC (low sensitivity side 6 ranges)

Number of channels: 2 (for current measurement)*2

*2 Models that allow unit insertion up to a total of 6 channels: 8826, serial No. 19990338386 or later.

9270, 9271, 9272, 9277, 9278, 9279, 3273 Frequency: 0.05 Hz to 5 kHz/ division, 11 ranges, 5 (r/min) to 500 (r/min)/ division, 5 ranges, P50 Hz (40 to 60 Hz), P60 Hz (50 to 70 Hz) Integration: 5 counts to 500 k counts/ division, Pulse duty ratio: 100 % f.s. Current: 5 mA to 100 A/ division, 10 ranges, linked to use with type of the clamp-on sensor, Voltage: 0.5 mV to 2 V/ division, 12 ranges, Max. allowable input: 30 V rms or 60 V DC, full-scale (f.s.) = 20/ 24 divisions, low-pass filter, 5/ 500/ 5 k/ 100 kHz or OFF, the measurement resolution is 1/80*3 of range * When used with 8826, and when used with 9279 CLAMP ON SENSOR, the resolution
3

Measurement ranges
Charge input (miniature connector) Pre-amplifier internal input (BNC terminal)

Measurement range

is 1/64 of range

500 V to 2 V/DIV, 12 ranges, the measurement resolution is 1/80 to 1/32 of range (changes according to measurement sensitivity) DC amplitude accuracy: 0.4 % f.s., Frequency characteristics: DC to Voltage input (BNC terminal) 400 kHz +1/ -3 dB, Low-pass filter: 5/ 500/ 5 k/ 100 kHz, Input coupling: DC, AC, GND, Max. allowable input: 30 V rms or 60 V DC

Measurement ranges

Max. sampling period Other functions Max. rated voltage to earth Accessories

1 s (voltage, current, integration), 1.125 s (frequency, pulse duty ratio) Voltage input pull-up: ON (10 k)/ OFF Input coupling: DC, GND, AC (voltage, current), DC (others) 30 V rms or 60 V DC None
(upper voltage which when applied to input channel casing or between input channels does not damage them) * The input cord and conversion cable are optional

Maximum sampling rate Max. rated voltage to earth Accessories

1 MS/s (simultaneous sampling of two channels) 30 V rms or 60 V DC None

(upper voltage which when applied to input channel casing or between input channels does not damage them) * The input cord is optional

9321 LOGIC PROBE

Detector for high/low recording of relay drive signals. Can be used for detecting outages on a power line.
Inputs: 4 channels (isolate), HIGH/LOW range switching type Input resistance : at least 100 k (HIGH range), 30 k (LOW range) High detection levels : 170 to 250 V AC, 70 to 250 V DC (HIGH range) 60 to 150 V AC, 20 to 150 V DC (LOW range) Low detection levels : 0 to 30 V AC, 0 to 43 V DC (HIGH range) 0 to 10 V AC, 0 to 15 V DC (LOW range) Response time : rising edge 1 ms max., falling edge 3 ms max.
(ON/OFF, with HIGH range at 200 V DC, LOW range at 100 V DC)

9320 LOGIC PROBE

Detector for high/low recording of voltage signals or relay contacts.
Inputs : 4 channels (common ground), digital / contact signal detection. Can detect open-collector signal at contact input. Input resistance : 1 M (digital input, at 0 to +5 V), at least 500 k (digital input, at +5 to +50 V) Pull up resistance : 2 k (contact input) Threshold level (digital input): +1.4 V, +2.5 V, +4.0 V Detect resistance (contact input): open at least 1.5k / close at 500 or
smaller, open at least 3.5k / close at 1.5k or smaller, open at least 25k / close at 8k or smaller

9321

Response time : 500 ns maximum Dimensions and mass: Approx. 62 (2.44) W 94 (3.7) H 20 (0.78) D mm (inch), 150 g (5.3 oz) Max. allowable input: 0 to +50 V DC

9320

Max. allowable input: 250 V rms (HIGH range), 150 V rms (LOW range) Dimensions and mass: Approx. 62 (2.44) W 127 (5) H 20 (0.78) D mm (inch), 320 g (1.13 oz)

9333 LAN COMMUNICATOR

Provided media: CD-R (1) Operating environment: IBM PC/AT or compatible (1024 768 or higher screen resolution is recommended when using the remote control functions), Windows 95 (OSR2 or higher)/ 98/ Me, Windows NT4.0/ 2000 (network functions installed, with a TCP/IP environment) Recorder operating environment: Compatible PC Card: LAN card (HIOKI-tested), Connector: 10BASE-T Communication system: Ethernet, TCP/IP Functions: Remote Control Applications: Remote Control of MEMORY HiCORDER (control by sending key codes and receiving screen images) Report Printing Screen image printing Receives waveform data in same format as waveform files from MEMORY HiCORDER (binary only) Waveform Data Acquisition Applications Accepts auto saving from MEMORY HiCORDER : same format as auto save files of MEMORY HiCORDER (binary only) Automatic printing by MEMORY HiCORDER at PC side. MEMORY HiCORDER Print key prints at PC side. Waveform Viewer Simple display of waveform files. Converts to CSV format: a selection can be specified, and thinning can be enabled. Display format setting: Scroll function, Enlarge/Reduce display, display CH settings. GP-IB Command Functions (MEMORY HiCORDER main unit) MEMORY HiCORDERs can be controlled by the same commands as GP-IB using TCP/IP Port 1 (GP-IB command functions are not required with the 9333)

9335 WAVE PROCESSOR

Distribution media: One CD-R Operating environment: Computer equipped with Pentium (133 MHz) or better CPU and at least 32 MB of memory, and running under Windows 95/98/Me or Windows NT 4.0/2000/XP (recommended
system: Pentium (200 MHz) or better with at least 64 MB of memory)

Functions: s Display functions: Waveform display/X-Y display/digital value display/cursor function/scroll function/maximum number of channels (32 channels analog, 32 channels logic)/gauge display (time, voltage axes)/graphical display s File loading: Readable data formats (.MEM, .REC, .RMS)/Maximum loadable file size: Maximum file size that can be saved by a given device (file size may be limited depending on the computer configuration) s Data conversion: Conversion to DSV format, tab delimited, space delimited/data culling (simple)/convert for specified channel/batch conversion of multiple files s Print functions: Print formatting (1 up, 2-to-16 up, 2-to-16 rows, X-Y 1-to-4 up/preview/hard copy/functions usable on any printer supported by operating system s Other: Parameter calculation/search/clipboard copy/launching of other applications

11

Composition of options * designated products are not CE-Mark compliant

Logic Signal Measurement

Note: Product names appearing herein are trademarks or registered trademarks of various companies.

Instrument

Input Modules

9321 LOGIC PROBE 4-channel isolated, on/off detection of AC/DC voltage

9599 MEMORY BOARD (48 mega-words) Expands instrument memory by 4 user installable. 9320 LOGIC PROBE 4-channels, on/off detection of voltage/contact signal 9598 MO UNIT
Installs on the bottom of the FDD unit. Must specify when ordering: not user installable.

Various input modules

Install by inserting into the instrument Can be replaced by user

8936 ANALOG UNIT 8937 VOLTAGE/TEMPERATURE UNIT 8938 FFT ANALOG UNIT 8939 STRAIN UNIT 8940 F/V UNIT (8826 Ver. 2.10 or later can be used),
(Current probes with a serial number of No. 1999-0338386 or later can be used, older types cannot be used.)

Storage Media
9626 PC CARD 32M
(PCMCIA adapter, 32 MB)

8946 4ch ANALOG UNIT (it cannot be used with 8826) 8947 CHARGE UNIT (8826 Ver. 2.20 or later can be used)

9627 PC CARD 64M

(PCMCIA adapter, 64 MB)

High-voltage input

Important Notice !
Use only PC Cards sold by HIOKI. Compatibility and performance are not guaranteed for PC cards made by other manufacturers. You may be unable to read from or save data to such cards.

9726 PC CARD 128M

(PCMCIA adapter, 128 MB)

9727 PC CARD 256M

(PCMCIA adapter, 256 MB)

9324 POWER CORD

for logic terminal

9728 PC CARD 512M

(PCMCIA adapter, 512 MB)

9322 DIFFERENTIAL PROBE

for up to 2 kV DC, 1 kV AC

9325 POWER CORD

for 8940 sensor terminal

9197 CONNECTION CORD

for high voltage (up to 500V)

9198 CONNECTION CORD

for low voltage (up to 300V)

Recording paper
9229 RECORDING PAPER roll type thermal paper, 30m/ 98.43 feet, 6 rolls / 1 set 9229-01 RECORDING PAPER perforated, roll type thermal paper, 30 m/ 98.43 feet, 6 rolls / 1 set

PC communication

9557 RS-232C CARD

9558 GP-IB CARD

9559 PRINTER CARD

LAN CARD (HIOKI-tested)

9333 LAN COMMUNICATOR 9335 WAVE PROCESSOR

software required to use LAN connection with Windows 95/ 98/ Me, NT 4.0/2000/XP Data conversion, print functions, waveform display, compatible with Windows 95/98/Me, Windows NT 4.0, and Windows 2000/XP

(compliance with the PCMCIA (compliance with the PCMCIA (compliance with the PCMCIA (compliance with the PCMCIA Standard) Standard) * With a GP-IB cable, Standard) * With a printer cable, Standard) Manufactured by third parties. cord length : 2m (6.6 feet) cord length : 1.5m (4.9 feet)

Current Measurement, other options

9318

9555 9279

9555

9272

*9303 PT
9277 9278 Insulation transformer, 400 V or 200 V AC input, 10 V AC output, for AC power line measurement.

9018-10 CLAMP ON PROBE *9132-10 CLAMP ON PROBE

Input from 10 to 500 A 40 Hz to 3 kHz for 0.2 V AC output. BNC terminal Input from 20 to 1000 A 40 Hz to 1 kHz for 0.2 V AC output. BNC terminal 9270 9271

9277 UNIVERSAL CLAMP ON CT

Observe waveforms from DC to distorted AC. Input up to 20 A, DC to 100 kHz for 2 VAC out

*9270 CLAMP ON SENSOR

Enables observation of distorted AC current waveforms. Input: up to 20 A, 5 to 50 kHz for 2 VAC out

3272 POWER SUPPLY For 3273, 3274, 3275

9278 UNIVERSAL CLAMP ON CT

Observe waveforms from DC to distorted AC. Input up to 200 A, DC to 100 kHz for 2 VAC out

*9271 CLAMP ON SENSOR 9199 CONVERSION ADAPTER

Banana-to-BNC, use to connect to BNC terminal on Input Module

9319 ADAPTER CABLE

3274 3273 Connects only the 3273 to the 8940 F/V UNIT.

9694 CLAMP ON SENSOR

Input 5 A, 45 Hz to 5 kHz for 50 mV AC output. BNC terminal

Enables observation of distorted AC current waveforms. Input: up to 200 A, 5 to 50 kHz for 2 VAC out

*9279 UNIVERSAL CLAMP ON CT

*9272 CLAMP ON SENSOR

Enables observation of distorted AC current waveforms. Input selectable 20/200 A, 5 to 10 kHz for 2 VAC out Note : Can only be used in combination with the 9555 SENSOR UNIT or 8940 F/V UNIT.

Observe waveforms from DC to distorted AC. 3273 CLAMP ON PROBE Wide (DC to 50 MHz) range, mA-level to 15 A rms current. Requires power from 3272 or 8940 F/V UNIT with the 9319 ADAPTER CABLE.

Input up to 500 A, DC to 20 kHz for 2 VAC out Note : Can only be used in combination with the 9555 SENSOR UNIT or 8940 F/V UNIT.

3274 CLAMP ON PROBE

Wide (DC to 10 MHz) range, mA-level to 150 A rms current. *Not for use with the 8940 F/V UNIT + 9319. Requires the 3272 POWER SUPPLY and needs scaling operation.

9217 CONNECTION CORD

Insulation BNC-to-insulation BNC, use to connect to insulation-BNC terminal on Input Module

*9165 CONNECTION CORD

Metal BNC-to-metal BNC, use to connect to metal-BNC terminal on Input Module

*9555 SENSOR UNIT

Used together with 9270 to 9272, 9277 to 9279 clamp-on sensors. Power supply unit.

9318 ADAPTER CABLE

Connects 9270 to 9272, 9277 to 9279 clamp-on sensors to 8940 F/V UNIT.

3275 CLAMP ON PROBE

Wide (DC to 2 MHz) range, mA-level to 500 A rms current. *Not for use with the 8940 F/V UNIT + 9319. Requires the 3272 POWER SUPPLY and needs scaling operation.

Ordering information
8826 MEMORY HiCORDER
8826
Example of combination

(main unit only)

The 8826 MEMORY HiCORDER cannot operate alone. To use the 8826, mount one or more optional input modules on it. An input cord for measurement use is not provided with the input module. Please purchase the optional 9197 or 9198 CONNECTION CORD together with the input module. 7 unit of 8936 (14ch) 9 unit of 8936 (18ch) 11 unit of 8936 (22ch) 13 unit of 8936 (26ch) 15 unit of 8936 (30ch)

1 unit of 8936 (2ch) 3 unit of 8936 (6ch) 5 unit of 8936 (10ch)

8826
Example of combination

2 unit of 8936 (4ch) 4 unit of 8936 (8ch) 6 unit of 8936 (12ch)

8 unit of 8936 (16ch) 10 unit of 8936 (20ch) 12 unit of 8936 (24ch) 14 unit of 8936 (28ch) 16 unit of 8936 (32ch)

DISTRIBUTED BY

HEAD OFFICE : 81 Koizumi, Ueda, Nagano, 386-1192, Japan TEL +81-268-28-0562 / FAX +81-268-28-0568 E-mail: os-com@ hioki.co.jp HIOKI USA CORPORATION : 6 Corporate Drive, Cranbury, NJ 08512 USA TEL +1-609-409-9109 / FAX +1-609-409-9108 E-mail: hioki@ hiokiusa.com

Shanghai Representative Office : 1704 Shanghai Times Square Office 93 Huaihai Zhong Road Shanghai, 200021, P.R.China TEL +86-21-6391-0090, 0092 FAX +86-21-6391-0360 E-mail: [email protected]

All information correct as of Aug. 5, 2003. All specifications are subject to change without notice.

8826E5-38B-03P

Printed in Japan