Scribd Logo
Upload

Welcome to Scribd!

  • 379 views

    Sikadur 732

    Uploaded by

    Hafidh Roiy
    Sikadur 732 provides a perfect bond for new concrete surface to old concrete. Solvent-free, thixotropic, 2-component structural epoxy resin adhesive.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Sikadur 732

    Uploaded by

    Hafidh Roiy
    379 views2 pages
    Sikadur 732 provides a perfect bond for new concrete surface to old concrete. Solvent-free, thixotropic, 2-component structural epoxy resin adhesive.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Sikadur 732 provides a perfect bond for new concrete surface to old concrete. Solvent-free, thixotropic, 2-component structural epoxy resin adhesive.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    379 views2 pages

    Sikadur 732

    Uploaded by

    Hafidh Roiy
    Sikadur 732 provides a perfect bond for new concrete surface to old concrete. Solvent-free, thixotropic, 2-component structural epoxy resin adhesive.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Technical Data Sheet Edition 2, 2007 Identification no. 02 03 02 02 003 0 000015 Version no.

    0010 Sikadur 732

    Sikadur 732
    Epoxy resin Bonding Agent
    Description A solvent-free, thixotropic, 2-component structural epoxy resin adhesive. Sikadur 732 provides a perfect bond for new concrete surface to old concrete. Complies with A.S.T.M C 881-78 Type II, Grade 2, Class B + C Uses To bond fresh, plastic concrete to hardened concrete and steel. Grout bolts, dowels, and pins, etc. Structural adhesive for concrete, masonry, metal, wood. etc s s s s s High strength bonding / adhesive Excellent adhesion to most structural materials High early and final strength Insensitive to moisture before, during and after cure Highly effective, even on damps surfaces

    Construction

    Advantages

    Coverage

    0.3 - 0.8 kg/m2, depending on substrate condition

    Instruction for Use


    Surface Preparation Surface must be clean and sound. It may be dry or damp, but free of standing water. Remove dust, laitance, grease, curing compounds, impregnation, waxes, foreign particles, disintegrated materials. Preparation work Concrete - Sandblast or use other approved mechanical methods. Steel - Sandblast to white metal finish. Mixing Pre-mix each component. Proportion 2 part Component A to 1 part Component B into a clean pail Mix thoroughly for 3 minutes with a paddle on low - speed (400-600 rpm) drill until uniform in color. Mix only that quantity that can be used within its pot life. To bond fresh concrete to hardened concrete. Apply by brush, roller or broom, place fresh concrete while Sikadur 732 is still tacky.

    Application

    Technical Data
    Colour Mix Ratio Mix Density Pot Life 30 C Tensile Strength (ASTM D-638) Flexural Strength (ASTM D-790) 28 days 390 kg/cm
    2 o

    Concrete Grey Comp. A : B = 2 : 1 by weight/volume Approx. 1.45 kg/ltr 35 minutes 28 days 180 kg/cm
    2

    Back
    Table of contents

    Sikadur 732

    1/2

    Bond Strength to Concrete (28 days) Bond Strength to Steel (28 days) Compressive Strength (ASTM D-695) 7 days 28 days Coefficient of thermal expansion (-20OC to +40O C) Shelf Life Storage Packaging Handling Precaution

    > 20 kg/cm2 (Concrete failure, over mechanically prepared concrete surface grade K400) > 120 kg/cm2 (Steel surface blast cleaning to SA 2 )

    >600 kg/cm2 >630 kg/cm2

    50 x 10- per C 2 years when unopened and stored properly in original container Dry, cool, shaded place 5 kg set s Avoid contact with skin and eyes s Wear protective gloves and eye protection during work s If skin contact occurs, wash skin thoroughly s If in eyes, hold eyes open, flood with warm water and seek medical attention without delay

    Construction

    Legal Notes

    The information, and, in particular, the recommendations relating to the application and end-use of Sika products, are given in good faith based on Sikas current knowledge and experience of the product when properly stored, handled and applied under normal conditions in accordances with Sikas recommendations. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The user of the product must test the products suitability for the intended application and purpose. Sika reserves the right to change the properties of its products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users must always refer to the most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request.

    PT. Sika Indonesia Jl. Raya Cibinong- Bekasi km. 20 Limusnunggal- Cileungsi BOGOR 16820 - Indonesia Tel. +62 21 8230025 Fax +62 21 8230026 Website : www.sika.co. id e-mail: [email protected]

    Branches Surabaya : Puri Niaga Blok G No. 29, Jl. Raya Rungkut Menanggal 11, Surabaya Tel : 031-8690202 ; Fax : 031-8682123 Medan : Jl. Pancing / Jl. Willem Iskandar No.75 & 75 A, Kec. Medan Tembung Tel : 061- 6619500; Fax : (061) 6619400 Batam : Jl. Laksamana Bintan, Komp. Bumi Riau Makmur Blok E No.3, Sungai Panas Tel : (0778) 424928; Fax : (0778) 450189

    Sikadur 732

    2/2

    You might also like