Scribd
Upload
222 views

DOM Lesson Plan

This document outlines the lesson plan for the subject Dynamics of Machines taught in the fifth semester of the Department of Aeronautical Engineering at Dayananda Sagar College of Engineering. It covers 8 units over 12 weeks from August to November 2012. The units include topics like friction, belt drives, balancing of rotating masses, governors, gyroscopes, cams, and static and dynamic force analysis. The lesson plan lists the topics to be covered in each class along with the relevant textbook chapters and examination scheme.

Uploaded by

Hareesha N G
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
222 views

DOM Lesson Plan

This document outlines the lesson plan for the subject Dynamics of Machines taught in the fifth semester of the Department of Aeronautical Engineering at Dayananda Sagar College of Engineering. It covers 8 units over 12 weeks from August to November 2012. The units include topics like friction, belt drives, balancing of rotating masses, governors, gyroscopes, cams, and static and dynamic force analysis. The lesson plan lists the topics to be covered in each class along with the relevant textbook chapters and examination scheme.

Uploaded by

Hareesha N G
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DAYANANDA SAGAR COLLEGE OF ENGINEERING DEPARTMENT OF AERONAUTICAL ENGINEERING LESSON PLAN FOR ODD SEMESTER: AUG-NOV:2012 SUBJECT: Dynamics

of Machines Hrs/week : 04 FACULTY: Hareesha N G Sub Code: 10AE53 Semester : V

S.N Date Details of the portions coverage UNIT - 3: Friction and Belt Drives: 1 26/07/2012 Introduction 2 30/07/2012 Definitions, Types of friction: laws of friction 3 31/07/2012 Friction in pivot and collar bearings 4 01/08/2012 Numerical Examples Belt drives: Flat belt drives, ratio of belt tensions, 5 2/08/2012 Belt drives: Flat belt drives, ratio of belt tensions, 6 6/08/2012 Numerical Examples 7 7/08/2012 centrifugal tension, power transmitted, Numerical Examples 8 8/08/2012 UNIT 4: Balancing of Rotating Masses: Static and dynamic balancing 9 9/08/2012 10 13/08/2012 Balancing of single rotating mass by balancing masses in same plane 11 14/08/2012 Balancing of single rotating mass by balancing masses in different planes 12 16/08/2012 Balancing of several rotating masses by balancing masses in same plane and in
different planes. 13 21/08/2012 Balancing of several rotating masses by balancing masses in same plane 14 22/08/2012 Balancing of several rotating masses by balancing masses in different planes. UNIT 5: Balancing of Reciprocating Masses: 15 23/08/2012 Inertia effect of crank and connecting rod 16 27/08/2012 single cylinder engine, Numerical Examples 17 28/08/2012 balancing in multi cylinder-inline engine, Numerical Examples 18 29/08/2012 Numerical Examples 19 30/08/2012 primary & Secondary forces, Numerical Examples V-type engine, Numerical Examples 20 3/09/2012 Radial engine Direct and reverse crank method, Numerical Examples 21 4/09/2012 UNIT 6: Governors: Types of governors 22 5/09/2012 force analysis of Porter governors, Numerical Examples 23 6/09/2012 24 13/09/2012 Numerical Examples 25 17/09/2012 Hartnell governors, governors 26 18/09/2012 Controlling force, stability, governors 27 20/09/2012 sensitiveness, isochronism, effort and power, governors UNIT 7: Gyroscope: 28 24/09/2012 Vectorial representation of angular motion 29 25/09/2012 Gyroscopic couple, Numerical Examples 30 26/09/2012 Effect of gyroscopic couple on ship, Numerical Examples 32 27/09/2012 Effect of gyroscopic couple on plane disc, aeroplane, Numerical Examples Numerical Examples 33 1/10/2012 stability of two wheelers and four wheelers, Numerical Examples 34 3/10/2012 UNIT 1: Static Force Analysis: Introduction: Static equilibrium 35 4/10/2012 Equilibrium of two and three force members, Numerical Examples 36 8/10/2012 Members with two forces and torque, Free body diagrams 37 9/10/2012 38 10/10/2012 Principle of virtual work, Numerical Examples 39 11/10/2012 Static force analysis of four bar mechanism, Numerical Examples 40 22/10/2012 Static force analysis of slider-crank mechanism with friction

Remarks

41 22/10/2012 Static force analysis of slider-crank mechanism without friction. UNIT 2: Dynamic Force Analysis: 42 25/10/2012 DAlemberts principle, Inertia force, inertia torque 43 30/10/2012 Dynamic force analysis of four-bar mechanism and slider crank mechanism 44 31/10/2012 Dynamically equivalent systems, Numerical Examples Turning moment diagrams and flywheels, Numerical Examples 45 5/11/2012 Fluctuation of Energy. Determination of size of flywheels 46 6/11/2012 UNIT 8: Analysis of CAMS: Analysis of Tangent cam with roller follower 47 7/11/2012 48 13/11/2012 Numerical Examples 49 15/11/2012 Circular arc cam operating flat faced and roller followers 50 19/11/2012 Numerical Examples, 51 19/11/2012 Numerical Examples, 52 20/11/2012 Undercutting in Cams, Numerical Examples

TEXT BOOKS: 1) Theory of Machines: Sadhu Singh, Pearson Education, 2nd edition, 2007. 2) Theory of Machines: Rattan S.S. Tata McGraw Hill Publishing Company Ltd., New Delhi, 2nd Edition, 2006. REFERENCE: 1) Theory of Machines by Thomas Bevan, CBS Publication 1984. 2) Design of Machinery by Robert L. Norton, McGraw Hill, 2001. 3) Mechanisms and Dynamics of Machinery by J. Srinivas, Scitech Publications, Chennai, 2002. 4) Dynamics of machinery by J. B. K. Das & P. L. S. Murthy. SCHEME OF EXAMINATION One Question to be set from each unit. Students have to answer any FIVE full questions out of EIGHT questions, choosing at least 2 questions from part A and 2 questions from part B.

Signature of the Faculty

Signature of HOD

You might also like