UI Automation Test case sheet

Last Modified Date 09-06-2011

Test Type Tree Navigation Views Plan Command Execution Undo and Redo Total

Total No. of Test Case 206 26 60 314

No. of Test Cases Automatabl Automated completely e Invalid 167 166 147 26 26 25 50 235 50 2 48 28

19 1 2

TEST CASE ID

TITLE

MAV0030_viewMapWindow MAV0038_procedureReport

MAV0039_planName

MAV0040_viewOrgnaizationsAllKnown

MAV0041_viewOrgnaizationsUnKnown

MAV0042_viewOrgnaizationsAnyone

MAV0043_viewAgentList MAV0044_viewAgentName

MAV0045_viewPlanName

MAV0046_procedureSignout MAV0047_viewMappedProcedure

MAV0048_viewDisplayProcedure

MAV0049_viewShowReport

MAV0050_viewShowMap

MAV0051_procedureMapSignOut

MAV0098_removeSegmentUnderAction

MAV0099_closeSegmentDialog MAV0118_showAllMessages

MAV0128_removeInfoNeed

STEPS

KEY VERIFICATION

KEY VERIFICATION

Clicks on the "Is procedure report" option under "Show" pop up menu

Clicks on the "Mapped procedures" option under "Show" pop up menu

Clicks on "Remove this segment" options under "Actions" pop up menu

Clicks on "Remove info need" option under "more" pop up menu located on the "Receives" Pane

Clicks on the "map" option under "show" pop up menu Verify that page with title "All procedures in Automation Test Plan" gets renders

Verify that form with map details gets loaded on the new browser window

Select "Plan name" from "Plan" list Verify that new page renders with "Plan combox located on "Procedure Map" page name" as a heading Select organization name from "Organization" list combo box located on "Procedure Map" page Where organization name from Select : Organization value: All "Organization" list combo box located on Agent Name value: "Procedure Map" page All Where : Select organization name from Organization value: unknown "Organization" list combo box located on Agent Name value: All "Procedure Map" page Where : Select Agent name from "Agent" list Organization value: <Organization combo box located on "Procedure Map" name> page Agent Name value: All Where Agent name from "Agent" list Select : Organization value: <Organization combo box located on "Procedure Map" Name> page Agent Where "Plan name" from "Plan" list Select : Name value: All Organization value: <Organization combox Name> Agent Name value: <Agent Name> Clicks on the "Sign Out" link Verify that page with title "All procedures" renders Select "segment name" from "Display procedures" list combo box Clicks on "Show Report" tab Verify that page with tilte "Procedures in <Segment name>" and segment information get rendered Verify that page with title "Procedures in <Segment name>" and Heading "<Plan name>" renders Clicks on "Show Map" tab Verify that page with title "Procedures Anyone from any organization" render Verify that page renders with hierarchy "Home->Unknown->Anyone" on the heading section Verify that page renders with hierarchy "Home->Organization name->Anyone" on the heading section 1. Verify that page with title "Procedures Anyone from <Organization Name>" render 1. Verify that page with title "Procedures 2. Verify that pagerender with hierarchy -<Agent Name>" renders "Home->Organization name->Anyone" on the heading section renders with "Plan 2. Verify that page renders with hierarchy Verify that new page "Home->Organization name->Agent Name" name" as a heading on the heading section Verify that page with title "Channels Information Sharing Planning" renders

Clicks on "Sign Out" tab

Verify that page with title "Channels Information Sharing Planning" renders

Verify that dialog box is generated displaying a message "Are you sure ?" Clicks on "cross" button on dialog box Verify that dialog box gets closed Clicks on "show all messages" link under "Messages" pane Verify that dialog box is generated which displays a message "Are you sure ?"

AUTOMATEDRESULT SCRIPT EXCEPTION ERROR TICKET NO. OMMENT C Function NOT RUN ality changed NOT RUN Function ality changed NOT RUN Function ality changed NOT RUN Function ality changed NOT RUN Function ality changed NOT RUN Function ality changed Function ality changed Function ality changed Function ality changed Function ality changed Function ality changed Function ality changed Function ality changed Function ality changed

NOT RUN NOT RUN

NOT RUN

NOT RUN NOT RUN

NOT RUN

NOT RUN

NOT RUN

NOT RUN

Function ality changed cannot automat e cannot automat e duplicat e -MAC010 cannot 1_showA automat llMessag e es

NOT RUN

NOT RUN NOT RUN

NOT RUN

TEST CASE ID

TITLE

MAP0001_addPlan

Verify that plan can be created

MAP0002_addNameAndLocalizePlan Name and Localize a plan

MAP0003_addNewUserToPlan

Add users to the plan.

MAP0004_deleteUser

Delete user

MAP0005_deletePlan

Delete plan

MAP0006_addOrganizations

Verify that organization can be added to plan

MAP0007_addOrganizationsDetails

Verify that organization details can be added to an organization

MAP0008_removeExpectation

Verify that expectation can be removed from the plan

MAP0009_addTask

Verify that task can be added to member of organization

MAP0010_addRoleJuridiction

Verify that Role, Title, Juridiction and supervisor can be assign to participating agent within an organization

MAP0011_addEventToPlan

Verify that Event can be added to a Plan

MAP0012_addPhase

Verify that phases can be created for the plan

MAP0013_addPhaseDetails

Verify that phases details can be added to the plan

MAP0014_addSegment

Verfy that Segment can be added to the plan

MAP0015_removeSegment

Verfy that Segment can be deleted fromthe plan

MAP0016_addEvent

Verify that event can be added to the Segment

MAP0017_deleteEvent

Verify that event can be deleted from the Segment

MAP0018_attachFile

Verify that file can be attachment to the Segment

MAP0019_deleteAttachFile

Verify that attachment can be deleted from the Segment

MAP0020_addFileToEvent

Verify that Attachment can be added to the Event of the Segment

MAP0021_deleteFileOfEvent

Verify that Attachment can be deleted from the Event of the Segment

MAP0022_addGoal

Verify that Goal can be added to the segment

MAP0023_removeGoal

Verify that Goal can be deleted from the Segment

MAP0024_moveTask

Verify that task(s) can be moved from one segment to another segment

Verify that user is able to receive task information/event message from other user or agent

MAP0025_receiveTask Verify that user is able to sent task information/event message to other user or agent

MAP0026_sendTask

STEPS 1. Enter the URL 'http://afourtech.mindalliance.com/' 2. Enter the username and password 3. Click on 'Sign In' button 4. Click on 'Channel Adminstration'Link. 5. Enter the 'New Plan URI' and 'owned by' details 6. Click on 'Submit' button 7. Navigate to Home page 8. Click 'Logout <username>' option under 'Actions' pop up menu Prerequisites: Plan should be created. 1. Enter the URL 'http://afourtech.mindalliance.com/' 2. Enter the username and password 3. Click on 'Sign In' button 4. Click on 'Channel Adminstration'Link 5. Enter the 'New Plan URI' and 'owned by' details 6. Click on 'Submit' button 7. Navigate to Home page 8. Select newly added plan 'New Plan v.1 (dev)' from 'Switch to Plan' drop down, located on the top right corner 9. Click on Information sharing model link 9. Click on 'About plan' option under 'Show' pop up menu. 10. Enter the details e.g. 'Name', 'Description' etc 11. Click on 'done' button 12. Click 'Logout <username>' option under Prerequisites: Plan should be created. 'Actions' pop up menu 1. Enter the URL 'http://afourtech.mindalliance.com/' 2. Enter the username and password 3. Click on 'Sign In' button 4. Click on 'Channel Adminstration'Link 5. Enter the 'New user id' 6. Click on 'Submit' button 7. Enter the 'Full Name', 'Email', 'Password' and select the role of the user (Admin/Planner/User/Disable) 8. click on 'Submit' button.

Prerequisites: i . Plan should be created. ii. User should be created. 1. Enter the URL 'http://afourtech.mindalliance.com/' 2. Enter the username and password 3. Click on 'Sign In' button 4. Click on 'Channel Adminstration'Link. 5. Enter the 'New user id' 6. Click on 'Submit' button 7. Enter the 'Full Name', 'Email', 'Password' and select the role of the user (Admin/Planner/User/Disable) Prerequisites: 8. Plan should be created. i . click on 'Submit' button. 1. Enter the URL 'http://afourtech.mindalliance.com/' 2. Enter the username and password 3. Click on 'Sign In' button 4. Click on 'Channel Adminstration'Link 5. Enter the 'New Plan URI' and 'owned by' details 6. Click on 'Submit' button 7. Select the newly added plan from plan dropdown list inside 'Manage plan' section 8. Click on 'Delete Plan' button. 9. Click on 'Logout <username>' link Prerequisites: Plan should be created. 1. Enter the URL 'http://afourtech.mindalliance.com/' 2. Enter the username and password 3. Click on 'Sign In' button 4. Select the plan from 'Switch to Plan' drop down, located on the top right corner 5. Click on 'Information Sharing Model' Link 6. Click on 'About plan' option under 'Show' pop up menu. 7. Click on 'show' pop up menu. 8. Select 'All organizations' from the list. 9. Enter name of organization in 'Other organization that should be assigned tasks ' field 10. Click on 'done' button.

Prerequisites: i. Plan should be created. ii. Atleast one organization should be added to plan 1. Enter the URL 'http://afourtech.mindalliance.com/' 2. Enter the username and password 3. Click on 'Sign In' button 4. Click on 'Information Sharing Model' Link 5. Select the plan from 'Switch to Plan' drop down, located on the top right corner 6. Click on 'About plan' option under 'Show' pop up menu. 7. Click on 'show' pop up menu. 8. Select 'All organizations' from the list. 9. Double click on organization name. 10. Enter the details about the selected organization in the details form. 11. Click on 'done' button. Prerequisites: i. Plan should be created. ii. Atleast one organization should be added to plan without any task. 1. Enter the URL 'http://afourtech.mindalliance.com/' 2. Enter the username and password 3. Click on 'Sign In' button 4. Select the plan from 'Switch to Plan' drop down, located on the top right corner 5. Click on 'Information Sharing Model' Link 6. Click on 'About plan' option under 'Show' pop up menu. 7. Click on 'show' pop up menu. 8. Select 'All organizations' from the list. 9. Click on organization name for which task is not assigned. 10. Click on 'Remove expectation' link. 11. Click on 'done' button.

Prerequisites: i. Plan should be created. Ii. Atleast one segment should be present. 1. Enter the URL 'http://afourtech.mindalliance.com/' 2. Enter the username and password 3. Click on 'Sign In' button 4. Select the plan from 'Switch to Plan' drop down, located on the top right corner 5. Click on 'Information Sharing Model' Link 6. Select the segment from 'Select plan segment' drop down, located on the top right corner 7. Click on 'Add new task' option under 'Actions' pop up menu. 8. Enter all the details related to the task. 9. Go to All organisation of 'About Plan' 10.Click 'Logout <username>' option under 'Actions' pop up menu Prerequisites: i. Plan should be created. Ii. Atleast one segment should be present. iii. Atleast one organization should be present. 1. Enter the URL 'http://afourtech.mindalliance.com/' 2. Enter the username and password 3. Click on 'Sign In' button 4. Select the plan from 'Switch to Plan' drop down, located on the top right corner 5. Click on 'Information Sharing Model' Link 6. Select the segment from 'Select plan segment' drop down, located on the top right corner 7. Click on 'About plan' option under 'Show' pop up menu. 8. Click on 'show' pop up menu. 9. Select 'All organizations' from the list. 10. Double click on any organization name 11. Enter Role, Title, Juridiction and supervisor for an agent inside 'Job' section 12. Press 'tab' key 13. Click on 'done' button.

Prerequisites: i. Plan should be created. 1. Enter the URL 'http://afourtech.mindalliance.com/' 2. Enter the username and password 3. Click on 'Sign In' button 4. Select the plan from 'Switch to Plan' drop down, located on the top right corner 5. Click on 'Information Sharing Model' Link 6. Click on 'About plan' option under 'Show' pop up menu. 7. Click on 'show' pop up menu. 8. Select 'All events' from the list. 9. Enter the new event in test box. 10. Press 'tab' key. 11. Select the check box. 12. Click on 'done' button. Prerequisites: i. Plan should be created. 1. Enter the URL 'http://afourtech.mindalliance.com/' 2. Enter the username and password 3. Click on 'Sign In' button 4. Select the plan from 'Switch to Plan' drop down, located on the top right corner 5. Click on 'Information Sharing Model' Link 6. Click on 'About plan' option under 'Show' pop up menu. 7. Enter the new phase in text box for the plan inside 'Phase' section 8. Press 'tab' key 9. Click on 'done' button. Prerequisites: i. Plan should be created. 1. Enter the URL 'http://afourtech.mindalliance.com/' 2. Enter the username and password 3. Click on 'Sign In' button 4. Select the plan from 'Switch to Plan' drop down, located on the top right corner 5.Click on 'Information Sharing Model' Link 6. Click on 'About plan' option under 'Show' pop up menu. 7. Click on Phase for which details is to be added. 8. Enter the details. 9. Click on 'done' button.

i. Plan should be created. ii. Atleast one phases should be present for the plan. 1. Enter the URL 'http://afourtech.mindalliance.com/' 2. Enter the username and password 3. Click on 'Sign In' button 4. Click on 'Information Sharing Model' Link 5. Click on 'Add new segment' option under 'Actions' pop up menu. 6. Enter the details about the segment 7. Click on 'done' button. 8. Click 'Logout <username>' option under 'Actions' pop up menu Prerequisites: i. Plan should be created. ii. Atleast one segment should be present. 1. Enter the URL 'http://afourtech.mindalliance.com/' 2. Enter the username and password 3. Click on 'Sign In' button 4. Click on 'Information Sharing Model' Link 5. Click on 'Add new segment' option under 'Actions' pop up menu. 6. Enter the details about the segment 7. Click on 'done' button. 8. Click on 'Remove this segment' option under 'Actions' pop up menu. 9. Click 'Logout <username>' option under 'Actions' pop up menu Prerequisites: i. Plan should be created. Ii. Atleast one segment should be present. 1. Enter the URL 'http://afourtech.mindalliance.com/' 2. Enter the username and password 3. Click on 'Sign In' button 4. Select the plan from 'Switch to Plan' drop down, located on the top right corner 5. Click on 'Information Sharing Model' Link 6. Select the segment from 'Select plan segment' drop down, located on the top right corner 7. Click on 'About plan segment' option under 'Show' pop up menu. 8. Enter name of event inside 'context' section. 9. Press 'tab' key or click any other test box. 10. Click on 'done' button.

i. Plan should be created. Ii. Atleast one segment should be present. iii. Atleast one event should be created for the segment. 1. Enter the URL 'http://afourtech.mindalliance.com/' 2. Enter the username and password 3. Click on 'Sign In' button 4. . Select the plan from 'Switch to Plan' drop down, located on the top right corner 5 Click on 'Information Sharing Model' Link 6. Select the segment from 'Select plan segment' drop down, located on the top right corner 7. Click on 'About plan segment' option under 'Show' pop up menu. 8. Click on '-' button for which event is to be deleted 9. Click on 'done' button. Prerequisites: i. Plan should be created. Ii. Atleast one segment should be present. 1. Enter the URL 'http://afourtech.mindalliance.com/' 2. Enter the username and password 3. Click on 'Sign In' button 4. Select the plan from 'Switch to Plan' drop down, located on the top right corner 5. Click on 'Information Sharing Model' Link 6. Select the segment from 'Select plan segment' drop down, located on the top right corner 7. Click on 'About plan segment' option under 'Show' pop up menu. 8. Select type of attachment as 'File' 9. Click on 'Choose file' button. 10. Select the file 11. Click on 'done' button.

Prerequisites: i. Plan should be created. Ii. Atleast one segment should be present. iii. Attachement should be added to the segment 1. Enter the URL 'http://afourtech.mindalliance.com/' 2. Enter the username and password 3. Click on 'Sign In' button 4. Select the plan from 'Switch to Plan' drop down, located on the top right corner 5. Click on 'Information Sharing Model' Link 6. Select the segment from 'Select plan segment' drop down, located on the top right corner 7. Click on 'About plan segment' option under 'Show' pop up menu. 8. Click '-' button for which attachment is to be deleted 9. Click on 'done' button. i. Plan should be created. Ii. Atleast one segment should be present. iii. Event should be present for the segment. 1. Enter the URL 'http://afourtech.mindalliance.com/' 2. Enter the username and password 3. Click on 'Sign In' button 4. Select the plan from 'Switch to Plan' drop down, located on the top right corner 5. Click on 'Information Sharing Model' Link 6. Select the segment from 'Select plan segment' drop down, located on the top right corner 7. Click on 'About plan segment' option under 'Show' pop up menu. 8. Click on event for which attachment is to be added. 9. Click on 'Choose file' button. 10. Select the file 11. Click on 'done' button.

Prerequisites: i. Plan should be created. Ii. Atleast one segment should be present. iii. Attachment should be present for event of the segment. 1. Enter the URL 'http://afourtech.mindalliance.com/' 2. Enter the username and password 3. Click on 'Sign In' button 4. Select the plan from 'Switch to Plan' drop down, located on the top right corner 5. Click on 'Information Sharing Model' Link 6. Select the segment from 'Select plan segment' drop down, located on the top right corner 7. Click on 'About plan segment' option under 'Show' pop up menu. 8. Click on event for which attachment is to be deleted. 9. Click on '-' button. 10. Click on 'done' button. i. Plan should be created. Ii. Atleast one segment should be present. 1. Enter the URL 'http://afourtech.mindalliance.com/' 2. Enter the username and password 3. Click on 'Sign In' button 4. Click on 'Information Sharing Model' Link 5. Click on 'About plan segment' option under 'Show' pop up menu. 6. Click on 'goals' option under 'show' pop up menu. 7.Enter the details 8. Click on 'done' button. 9. Click 'Logout <username>' option under 'Actions' pop up menu

1. Enter the URL 'http://afourtech.mindalliance.com/' 2. Enter the username and password 3. Click on 'Sign In' button 4. Click on 'Information Sharing Model' Link 5. Click on 'Add new segment' option under 'Actions' pop up menu 6. Enter the details 7. Click on 'done' button 8. Click on 'About plan segment' option under 'Show' pop up menu. 9 Click on 'goals' option under 'show' pop up menu. 10. Enter and select the values for Objective, Category, Magnitude, Organization, Goal and Achieved at end 11. Click on delete option of respective goal 12 Click on 'done' button 13. Click on 'Logout <username>' option under 'Actions' pop up menu Prerequisites: i. Plan should be created. Ii. Atleast two segment should be present. Iii. Atleast one task should be created within an organization. 1. Enter the URL 'http://afourtech.mindalliance.com/' 2. Enter the username and password 3. Click on 'Sign In' button 4.Select the plan from 'Switch to Plan' drop down, located on the top right corner 5. Click on 'Information Sharing Model' Link 6. Select the segment from 'Select plan segment' drop down, located on the top right corner 7. Click on 'Move tasks to segment' option under 'Actions' pop up menu. 8. Select task(s) from the 'Task Mover' form. 9. Select segment from 'Move to segment' dropdown list. 10. Click on 'done' button.

Prerequisites: i. Plan should be created. ii. At least one Segment should be present. iii. At least two task should be created within an organization 1. Enter the URL 'http://afourtech.mindalliance.com/' 2. Enter the username and password 3. Click on 'Sign In' button 4. Select the plan from 'Switch to Plan' drop down, located on the top right corner 5. Click on 'Information Sharing Model' Link 6. Select the segment from 'Select plan segment' drop down, located on the top right corner 7. Select the task from Information Sharing Plan 8. Click on 'add info received' option under 'Receives' section 9. Enter the details required to receive the information from any other user or agent. 10. Clicks on 'Show details' option under 'more' pop Prerequisites: up menu located created. i. Plan should be on 'Receives' section ii. At least one Segment should be present. iii. At least two task should be created within an organization 1. Enter the URL 'http://afourtech.mindalliance.com/' 2. Enter the username and password 3. Click on 'Sign In' button 4. Select the plan from 'Switch to Plan' drop down, located on the top right corner 5. Click on 'Information Sharing Model' Link 6. Select the segment from 'Select plan segment' drop down, located on the top right corner 7. Select the task from Information Sharing Plan 8. Click on 'add info sent' option under 'Sends' section 9. Enter the details required to send the information to other user. 10. Clicks on 'Show details' option under 'more' pop up menu located on 'Sends' section

KEY VERIFICATION

AUTOMATED

When clicked on 'Submit' button, the new plan should be added

When clicked on 'done' button, the newly added plan should be updated

Verify that user should be added when clicked on submit button

Verify that user sholud get deleted when clicked on submit button

Verify that plan should get deleted.

Verify that organization should get added to plan

Verify that the details are added to the organization.

Verify that expectation should be removed from organization and 'Add expectation' message should be display.

Verify that task should be added to organization

Verify that Role, Title, Juridiction and supervisor should be assign to participating agent within an organization

Verify that event should be added to the plan.

Verify that phases should be created for the plan

Verify that phases details should be added to the plan.

Verify that segment should be added to the plan.

Verify that segment should be deleted from the plan

Verify that Event should be added to the segment.

Verify that Event should be deleted from the segment.

Verify that attachment should be added to the segment.

Verify that attachment should be deleted from the segment.

Verify that attachment should be added to event of the segment.

Verify that attachment should be deleted from the event of the segment.

Verify that goal should be added to plan segment.

When clicked on 'delete' option, the respective goal should be deleted from the segment

Verify that task(s) should be moved to selected segment.

When details entered, the flow should be connected between two nodes

When details entered, the flow should be connected between two nodes

TICKET NO. AUTOMATED RESULT SCRIPT EXCEPTION ERROR

Yes

PASS

Yes

PASS

Yes

PASS

Yes

PASS

Yes

PASS

90

Yes

PASS

104

Yes

PASS

104

Yes

PASS

104

Yes

PASS

Yes

PASS

104

Yes

PASS

105

Yes

FAIL

Element is not currently106 visible and so may not be interacted with System i

Yes

PASS

106

Yes

PASS

61

Yes

PASS

Yes

PASS

Yes

PASS

Yes

PASS

Yes

PASS

Yes

PASS

Yes

PASS

Yes

PASS

Yes

PASS

Yes

PASS

PASS

Yes PASS

Yes

TEST CASE ID

TITLE

MAC0041_RedoDi Verify that user is sintermediateTas able to redo the k disIntermediate task

MAC0059_RedoTr Verify that user is ansferJobs able to undo the jobs which were transferred

STEPS 1. Enter the URL 'http://afourtech.mindalliance.com/' 2. Enter the username and password 3. Click on 'Sign In' button 4. Select the Plan from 'Switch to plan' dropdown box 5. Select the Segment from 'Select plan segment' dropdown box 6. Select the intermediate task from Information Sharing Plan 7. Click on summary of the intermediate task under Task section 8. Click on 'Disintermediate' option under 'more' pop up menu 9. Click on 'Undo disintermediate' option under 'Actions' pop up menu 9. Enter on 'Redo 'http://afourtech.mind- under 1. Click the URL disintermediate' option alliance.com/' 2. Enter the username and password 3. Click on 'Sign In' button 4. Select the Plan from 'Switch to plan' dropdown box 5. Click on 'About plan' option under 'Show' pop up menu 6. Click on 'all organizations' option under 'show' pop up menu 7. Click on any organization under 'All Organizations' section 8. Tick the 'Transfer jobs' check box 9. Select the organization name from 'Transfer job from' dropdown box where user wants to transfer the job from 10. Select the job(s) 11. Click on 'Transfer jobs' button 12. Click on 'done' button 13. Click on 'Undo transfer jobs' option under 'Actions' pop up menu 14. Click on 'Redo transfer jobs' option under

KEY VERIFICATION 1. When clicked on 'Disintermediate' option, the intermediate task should be disintermediated 2. When clicked on 'Undo disintermediate' option, the disintermediated task should get intermediate again 3. When clicked on 'Redo disintermediate' option, the intermediate task should get disintermediated task again

AUTOMATE D No

1. When clicked on 'Transfer jobs' button, the selected job(s) of one organization should be transferred to respective organization 2. When clicked on 'Undo transfer jobs' option, the job which was transffered in the organization should be removed and restored in previous organization 3. When clicked on 'Redo transfer jobs' option, the job should be transferred again to respective organization

No

RESULT NOT RUN

SCRIPT ERROR TICKET COMMEN EXCEPT NO. T ION

NOT RUN