Scribd
Upload
753 views2 pages

Agitator

This document provides data on an agitator system for a customer including vessel dimensions, process details, product properties, and component specifications. It lists the total height, fill height, diameter, head type, temperature and pressure for the vessel. Product information includes densities, viscosities, solids content and particle size. The document also specifies the preferred existing design if applicable, including motor power and type, shaft details, sealing requirements and materials.

Uploaded by

Thiruvilan Arakkonam Mohan
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
753 views2 pages

Agitator

This document provides data on an agitator system for a customer including vessel dimensions, process details, product properties, and component specifications. It lists the total height, fill height, diameter, head type, temperature and pressure for the vessel. Product information includes densities, viscosities, solids content and particle size. The document also specifies the preferred existing design if applicable, including motor power and type, shaft details, sealing requirements and materials.

Uploaded by

Thiruvilan Arakkonam Mohan
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

EKATO Corporation 48 Spruce Street Oakland, NJ 07436 201.825.4684 www.ekato.

com

AGITATOR DATA SHEET


Name: Company: Address: Phone: Email: Date: EKATO Contact:

VESSEL DATA

htot htt hfill d1

(total height) (tangent/tangent) (fill height) (tank diameter)

d1 hfill

htt htot

Vessel Head Type : Wetted Parts: Process Temp: Process Pressure:

Agitator Mounting Nozzle Size: Steady Bearing Allowed: Required Mixing Tasks: Blending Liquid/Liquid Dispersion Gas/Liquid Dispersion Off Bottom Suspension of Solids Homogeneous Suspension of Solids Other: Yes No Baffles (if existing): Number:

Largest Opening to Pass Impeller: Baffle Size: (H) (W) (L)

EKATO Corporation 48 Spruce Street Oakland, NJ 07436 201.825.4684 www.ekato.com


PRODUCT DATA
Component 1 Density Viscosity (cps) Wt% Solids Particle Size (um) Process Description (special considerations, e.g. sticky product, foaming, shear sensitivity): Component 2 Final Product

Preferred Existing Design (if applicable): Motor hP: Shaft Diameter: Shaft Length: No. Impellers: Motor Requirements: TEFC VFD Other: Sealing Requirements: Double Dry Magdrive Stuffing Box Single Lip Seal Triple Single Ring Material: O-Ringe Material: Product Side: atm. Side: Area Class. Preferred Vendor: Impeller Type: Impeller Diameter: Seal Type:

You might also like