Scribd
Upload
34 views1 page

Experiment No. 2: Op-Amp Applications-I: Chapter 4 From Boylestad's "Electronic Devices and Circuit Theory")

This document provides questions about operational amplifier applications and characteristics. It asks about the ideal op-amp characteristics, why open-loop gain is not good, what virtual short circuit and virtual ground are, and how biasing works. It also asks questions about input offset voltage, bias and offset currents, and what the output signals would be under different input conditions.

Uploaded by

Ishrak Ahmed
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
34 views1 page

Experiment No. 2: Op-Amp Applications-I: Chapter 4 From Boylestad's "Electronic Devices and Circuit Theory")

This document provides questions about operational amplifier applications and characteristics. It asks about the ideal op-amp characteristics, why open-loop gain is not good, what virtual short circuit and virtual ground are, and how biasing works. It also asks questions about input offset voltage, bias and offset currents, and what the output signals would be under different input conditions.

Uploaded by

Ishrak Ahmed
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

Experiment No.

2: Op-Amp Applications-I
1. 2. 3. 4. Why operational amplifier is so named? What is differential amplifier? Op amp is a DC-coupled high-gain voltage amplifier. What is DC coupling? What is biasing? Why do we need to do biasing for an amplifier? [Hint: read chapter 4 from Boylestads Electronic Devices and Circuit Theory] 5. What are the five ideal op-amp characteristics? 6. Why open-loop gain in op-amp is not good? 7. What is virtual short circuit and virtual ground? 8. Why do we have virtual short circuit condition in op-amp? 9. Do we have virtual short circuit and virtual ground in non-inverting configuration? 10. Do we have any current going into the inverting/non-inverting input terminal of the op-amp? Justify your answer. 11. What is input offset voltage? Why do we have this voltage? 12. Define input bias current and input offset current. 13. Assume that the biasing voltage for an op-amp is 12 V+ and 12 V-. In the open loop condition if no input signal is provided what would be the output signal? Justify your answer. 14. Through the two input terminals of the op-amp (inverting and non-inverting input) if we provide two 8 V input signals, what would be the output of the amplifier? Write answer for question number 6, 7, 8, 13 & 14 in the lab report.

Resource: Electronic Devices and Circuit Theory Boylestad (chapter 4) Microelectronic Circuits- Sedra & Smith (chapter 2: 2.1.2, 2.2, 2.2.1, 2.2.4 & 2.3.1)

You might also like