Scribd
Upload
321 views

Electronics Components Specification

The document is a bill of materials (BOM) listing the components needed to build a x0xb0x device. It includes over 200 individual items such as an ABS case, printed circuit boards, various electronic components like resistors, capacitors, transistors, integrated circuits, and hardware needed for assembly. The BOM acts as a checklist to ensure all necessary parts are acquired to construct the x0xb0x device.

Uploaded by

pratut3335
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
321 views

Electronics Components Specification

The document is a bill of materials (BOM) listing the components needed to build a x0xb0x device. It includes over 200 individual items such as an ABS case, printed circuit boards, various electronic components like resistors, capacitors, transistors, integrated circuits, and hardware needed for assembly. The BOM acts as a checklist to ensure all necessary parts are acquired to construct the x0xb0x device.

Uploaded by

pratut3335
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

x0xb0x Bill of Materials (BOM)

Image Description ABS Case (PT-10) Set of main and I/O panels Set of main and I/O PCBs Number Check 1 1 1

9VAC wall wart

15/32" x 1/4" standoff

3/8" x 1/4" standoff

4-40 lock washer 4-40 washer

7 4

4-40 x 1/4" hex button

4-40 x 1/4" phillips button

4-40 x 1/4" phillips cheesehead (i 4 swear its called that)

Rubber feet

Switch cap (white)

Switch cap (black)

15

Potentiometer knob

Switch knob

Heat sink (TO-220)

40-pin DIP socket

8-pin DIP socket

1/4" stereo jack

1/8" jack

2.1mm power jack

USB type-B jack

MIDI/DINSYNC jack

Toggle switch

Rotary encoder

16 position rotary switch

Tact switch

23

Solid ~20-gauge wire. (Supply this 1 yourself)

6 wire jumper ribbon cable OR 9 wire and 6 wire

4 OR 2 x 9c and 1x 6c 40

0.22" LED standoff

Red 5mm LED

40

1N4001 1N4148 10 ohm 5% resistor Brown-black-black-gold 22 ohm 5% resistor Red-red-black-gold Red-purple-black-gold 27 ohm 5% resistor

4 29 2

100 ohm 5% resistor brown-black-brown-gold red-red-brown-gold 220 ohm 5% resistor

470 ohm 5% resistor yellow-purple-brown-gold 1K 5% resistor brown-black-red-gold brown-green-red-gold brown-gray-red-gold Red-red-red-gold 1.5K 5% resistor 1.8K 5% resistor 2.2K 5% resistor

1 1 19

4.7K 5% resistor yellow-purple-red-gold blue-gray-red-gold 6.8K 5% resistor 10K 5% resistor brown-black-orange-gold red-red-orange-gold 22K 5% resistor 33K 5% resistor orange-orange-orange-gold 47K 5% resistor yellow-purple-orange-gold blue-gray-orange-gold Brown-black-yellow-gold 68K 5% resistor 100K 5% resistor

2 1 94 10 1

1 24

220K 5% resistor Red-red-yellow-gold 1MEG 5% resistor brown-black-green-gold 1.5MEG 5% resistor brown-green-green-gold

2.4K 1% resistor (red yellow black 1 brown brown) 5.6K 1% resistor (green blue black 1 brown brown) 24K 1% resistor (red yellow black 1 red brown) 200K 1% resistor 2K (202) trim potentiometer 17 1

5K (502) trim potentiometer 50K (503) trim potentiometer 500K (504) trim potentiometer

1 1 1

50K D (log) potentiometer

50K B (linear) potentiometer

50K B (linear) dual potentiometer 1

1Meg A (log) dual potentiometer

1K PTC Thermistor

.001uF (2A102K) capacitor

.0068uF (2A682K) capacitor

.01uF (2A103K) capacitor .018uF (2A183K) polyester capacitor .033uF (2A333K) polyester capacitor

.047uF (2A473K) capacitor

.068uF (2A683K) capacitor

.1uF (2A104K) capacitor

.1uF (104) ceramic

16

.22uF (2A224K) polyester capacitor

1uF electrolytic capacitor

13

1uF (105) tantalum capacitor

2.2uF electolytic capacitor

10uF electrolytic capacitor

13

47uF electrolytic capacitor

100uF 10V electrolytic capacitor

100uF 25V electrolytic capacitor

1000uF electrolytic capacitor

2200uF electolytic capacitor

4066 analog switch

74AC174

74AC126 74AC165 74AC595

1 3 5

2SA733P, TO-92 PNP transistor

10

2SC536F, TO-92 NPN transistor 2SK30 JFET

24

Some kits have a 2SK30AY and a 2 2SK30AO, see the instructions for which one to put where. AN6562 8-DIP dual Op-Amp 2

2SC2291 5-SIP matched pair with 1 common base

2SC1583 5-SIP matched pair with 3 common emitter

LA4140 9-SIP

BA6110 9-SIP BA662A 9-SIP

1 (optional)

ATmega162 microcontroller

25LC33 EEPROM

7805 voltage regulator (TO-220)

7806 voltage regulator (TO-92)

LM336Z-5.0 5V voltage reference 1 (TO-92)

4N37 optoisolator

FT232 USB chip

6MHz ceramic resonator

16MHz ceramic resonator

You might also like