Cables Heliax

HELIAX Coaxial Cables
440
Index
General Information
HELIAX Coaxial Cable Cable Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 442 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 450 HELIAX Coaxial Cable Types. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 453 HELIAX Coaxial Cable...Todays Alternative to Braided Cable . . . . . . . . . . . . . . . 459 Connectors HELIAX Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 462 New OnePiece Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 464 HELIAX Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 471 Factory Made Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 472 Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 473
Ordering Information and Specifications

HELIAX Coaxial Cables and Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 474 Factory Made Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 584 Phase Measured Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 588 GPS Antenna Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 592 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 593
Applications and Technical Information

Fire Retardant Cables and Waveguides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 626 Intermodulation Generation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 630 Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 631
441
Coaxial Cable Selection Guide
HELIAX Coaxial Cable Selection Guide - 50-ohm, Foam Dielectric

Superflexible, FSJ Series 3/8" 480 FSJ2-50 FSJ2RN-50 FSJ2RN-50 FSJ2RN-50 FSJ2P-50-(**) p. 590 13400 13.2 83 1 (25) 0.649 (2.13) 1.20 (3.94) 2.64 (8.66) 4.06 (13.3) 5.97 (19.6) 11.3 (37.2) 15.5 (50.8) Extraflexible, EFX Series 3/8" 489 EFX2-50 EFX2RN-50 EFX2RN-50 EFX2RN-50 EFX2P-50-(**) 13500 15.6 85 1.75 (45) 0.584 (1.92) 1.08 (3.56) 2.39 (7.83) 3.68 (12.1) 5.41 (17.8) 10.3 (33.8) 14.1 (46.3) Foam Dielectric, VXL Series 7/8" 503 VXL5-50 VXL5RN-50 VXL5RN-50 VXL5RN-50 VXL5P-50-(**) 4900 90 88 5 (125) 0.214 (0.702) 0.397 (1.3) 0.878 (2.88) 1.36 (4.46) 2.01 (6.59)
Nominal Size Catalog Pages Standard Cables Standard Black Jacket Fire Retardant Cables CATVX, VW-1, IEC 332-1 CATV, UL1581, IEC 332-3, IEEE 383 CATVR, UL1666 (Riser) Low VSWR Cables, Specially Tested Standard Black Jacket Special Application Cables Phase Stabilized; Phase Measured Characteristics Maximum Operating Frequency, MHz Peak Power Rating, kW Relative Propagation Velocity, % Minimum Bend Radius, in (mm) 30 MHz 100 MHz 450 MHz 1000 MHz 2000 MHz 6000 MHz 10000 MHz
1/4" 474 FSJ1-50A FSJ1RN-50B FSJ1RN-50B FSJ1RN-50B
1/2" 485 FSJ4-50B FSJ4RN-50B FSJ4RN-50B FSJ4RN-50B FSJ4P-50B-(**) p. 590 10200 15.6 81 1.25 (32) 0.557 (1.83) 1.04 (3.41) 2.31 (7.59) 3.60 (11.8) 5.37 (17.6) 10.5 (34.4) 14.6 (47.9)
FSJ1P-50A-(**) p. 590 20400 6.4 84 1 (25) 0.973 (3.19) 1.79 (5.89) 3.91 (12.8) 5.96 (19.6) 8.67 (28.5) 16.1 (52.7) 21.7 (71.2)
Attenuation, dB/100 ft (dB/100 m) Standard conditions: VSWR 1.0; ambient temperature 20 C (68 F).
Average Power Rating, kW Standard conditions: VSWR 1.0; ambient temperature 40 C (104 F); inner conductor temperature 100C (212F); no solar loading. 30 MHz 100 MHz 450 MHz 1000 MHz 2000 MHz 6000 MHz 10000 MHz 2.28 1.23 0.567 0.372 0.256 0.138 0.102 3.97 2.14 0.975 0.634 0.431 0.228 0.166 5.76 3.09 1.38 0.889 0.598 0.307 0.220 3.99 2.15 0.978 0.635 0.431 0.227 0.165 12.3 6.62 2.99 1.93 1.31
** Insert suffix number from specific cable Catalog page. See specific Catalog page.
442
Customer Service Center - Call toll-free from: U.S.A., Canada and Mexico 1-800-255-1479
HELIAX Coaxial Cable Selection Guide - 50-ohm, Foam Dielectric

Foam Dielectric, LDF Series 5/8" 7/8" 500 506 LDF4.5-50 LDF4.5RN-50 LDF4.5RN-50 LDF4.5RN-50 LDF4.5P-50-(**) 6100 62 89 8 (200) 0.254 (0.834) 0.473 (1.55) 1.05 (3.46) 1.64 (5.38) 2.44 (8.02) 4.76 (15.6) LDF5-50A LDF5RN-50A LDF5RN-50A LDF5RN-50A LDF5P-50A-(**) p. 590 5000 91 89 10 (250) 0.195 (0.641) 0.364 (1.19) 0.808 (2.65) 1.25 (4.12) 1.86 (6.11)
1/4" 491 Standard Cables LDF1-50 LDF1RN-50 LDF1RN-50 LDF1RN-50 LDF1P-50-(**) p. 590 Characteristics 15800 12.1 86 3 (76) 0.667 (2.19) 1.23 (4.05) 2.71 (8.88) 4.16 (13.6) 6.10 (20) 11.5 (37.7) 15.7 (51.5)
3/8" 493 LDF2-50 LDF2RN-50 LDF2RN-50 LDF2RN-50 LDF2P-50-(**) p. 590 13500 15.6 88 3.75 (95) 0.563 (1.85) 1.04 (3.42) 2.29 (7.51) 3.52 (11.6) 5.17 (17) 9.79 (32.1) 13.4 (43.9)
1/2" 496 LDF4-50A LDF4RN-50A LDF4RN-50A LDF4RN-50A LDF4P-50A-(**) p. 590 8800 40 88 5 (125) 0.357 (1.17) 0.661 (2.17) 1.45 (4.75) 2.22 (7.28) 3.25 (10.7) 6.11 (20.1)
1-1/4" 513 LDF6-50 LDF6RN-50 LDF6RN-50 LDF6RN-50 LDF6P-50-(**) 3300 205 89 15 (380) 0.135 (0.444) 0.254 (0.832) 0.571 (1.87) 0.897 (2.94) 1.35 (4.43)
1-5/8" 520 LDF7-50A LDF7RN-50A LDF7RN-50A LDF7RN-50A LDF7P-50A-(**) 2500 315 88 20 (510) 0.109 (0.356) 0.205 (0.671) 0.467 (1.53) 0.742 (2.43) 1.13 (3.71)
2-1/4" 524 LDF12-50 LDF12RN-50 LDF12RN-50 LDF12RN-50 LDF12P-50-(**) 2200 425 88 24 (610) 0.091 (0.299) 0.173 (0.566) 0.400 (1.31) 0.644 (2.11) 0.994 (3.26)
Fire Retardant Cables
Low VSWR Cables, Specially Tested Special Application Cables
Attenuation, dB/100 ft (dB/100 m) Standard conditions: VSWR 1.0; ambient temperature 20C (68F).
Average Power Rating, kW Standard conditions: VSWR 1.0; ambient temperature 40C (104F); inner conductor temperature 100C (212F); no solar loading. 3.32 1.79 0.818 0.533 0.363 0.193 0.141 4.14 2.24 1.02 0.663 0.451 0.239 0.175 6.46 3.49 1.59 1.04 0.710 0.378 9.57 5.14 2.31 1.48 0.996 0.511 14.1 7.56 3.41 2.19 1.48 22.0 11.7 5.22 3.32 2.21 30.9 16.4 7.18 4.52 2.96 39.8 21.0 9.06 5.64 3.65
U.K. 0800-250055 Australia 1800-803 219 New Zealand 0800-441-747
Visit us at: www.andrew.com
443
HELIAX Coaxial Cable Selection Guide - 50-ohm, Foam and Air Dielectric
High Power, High Temp, Superflexible, ETS Series Nominal Size Catalog Pages Standard Cables Fire Retardant Cables CATVP, UL910 PLENUM, jacketed Special Application Cables Phase Stabilized; Phase Measured Characteristics Maximum Operating Frequency, MHz Peak Power Rating, kW Relative Propagation Velocity, % Minimum Bend Radius, in (mm) 30 MHz 100 MHz 450 MHz 1000 MHz 2000 MHz 6000 MHz 10000 MHz 20000 6.4 82 1 (25) 0.97 (3.19) 1.79 (5.86) 3.86 (12.7) 5.86 (19.2) 8.46 (27.7) 15.4 (50.6) 20.6 (67.5) 13400 13.2 83 1 (25) 0.653 (2.14) 1.22 (3.99) 2.71 (8.89) 4.22 (13.8) 6.28 (20.6) 12.2 (40.1) 17 (55.8) 18000 6.4 82 1 (25) 0.911 (2.99) 1.68 (5.51) 3.65 (12) 5.57 (18.3) 8.10 (26.6) 15.0 (49.1) 20.2 (66.2) p. 591 p. 591 ETS1-50T ETS2-50T HST1-50 1/4" 477 3/8" 483 High Power, High Temp, Superflexible, HST Series 1/4" 529
Average Power Rating, kW Standard conditions: VSWR 1.0; ambient temperature 40 C (104 F); inner conductor temperature (as noted); no solar loading. Inner Conductor Temperature, C (F) 30 MHz 100 MHz 450 MHz 1000 MHz 2000 MHz 6000 MHz 10000 MHz 200 (392) 5.48 2.98 1.38 0.909 0.629 0.345 0.259 200 (392) 9.89 5.31 2.38 1.53 1.03 0.529 0.381 250 (482) 3.60 1.95 0.897 0.588 0.405 0.219 0.163
444
High Power, High Temp., Superflexible, HST Series 3/8" 1/2" 533 549 Standard Cables Fire Retardant Cables HST2-50 Special Application Cables Characteristics 13400 13.2 83 1 (25) 0.667 (2.19) 1.23 (4.05) 2.70 (8.85) 4.13 (13.6) 6.04 (19.8) 11.3 (37.2) 15.4 (50.5) 10200 15.6 81 1.25 (32) 0.586 (1.92) 1.09 (3.58) 2.42 (7.93) 3.74 (12.3) 5.55 (18.2) 10.7 (35.1) 14.8 (48.6) 10000 6.4 84 1 (25) 0.941 (3.09) 1.73 (5.69) 3.75 (12.3) 5.70 (18.7) 8.24 (27.0) 15.1 (49.5) 20.2 (66.2) 13400 13.2 83 1 (25) 0.650 (2.13) 1.20 (3.94) 2.61 (8.56) 3.98 (13.0) 5.78 (19.0) 10.7 (35.1) 14.4 (47.2) 10200 15.6 81 1.25 (32) 0.512 (1.68) 0.947 (3.11) 2.07 (6.78) 3.16 (10.4) 4.62 (15.2) 8.63 (28.3) 11.7 (38.4) HST4-50 HS1RP-50A HS2RP-50 HS4RP-50 Plenum, Superflexible, HS-RP Series 3/8" 531
1/4" 527
1/2" 546
Average Power Rating, kW Standard conditions: VSWR 1.0; ambient temperature 40C (104F); inner conductor temperature (as noted); no solar loading. 200 (392) 9.98 5.40 2.47 1.61 1.10 0.588 0.433 200 (392) 15.6 9.29 4.19 2.71 1.83 0.947 0.685 100 (212) 1.56 0.850 0.393 0.259 0.179 0.098 0.073 100 (212) 2.69 1.46 0.670 0.439 0.302 0.164 0.121 100 (212) 3.31 1.79 0.821 0.537 0.368 0.197 0.145
445
HELIAX Coaxial Cable Selection Guide - 50-ohm, Air Dielectric

Nominal Size Catalog Pages Standard Cables Standard Black Jacket Fire Retardant Cables CATVX, VW-1, IEC 332-1 CATV, UL1581, IEC 332-3, IEEE 383 CATVR, UL1666 (Riser) CATVP, UL910 PLENUM, jacketed Low VSWR Cables, Specially Tested Standard Black Jacket HJ4P-50-(**) Fire Retardant (CATVR), 824-894 MHz, 1.20 VSWR max. Special Application Cables High Power/High Temperature Phase Stabilized; Phase Measured Characteristics Maximum Operating Frequency, MHz Peak Power Rating, kW Relative Propagation Velocity, % Minimum Bend Radius, in (mm) 30 MHz 100 MHz 450 MHz 1000 MHz 2000 MHz 6000 MHz 10000 MHz 10900 21 91.4 5 (125) 0.442 (1.45) 0.821 (2.69) 1.82 (5.96) 2.81 (9.23) 4.17 (13.7) 8.03 (26.3) 11.1 (36.4) 6600 40 92 7 (180) 0.264 (0.867) 0.488 (1.60) 1.07 (3.51) 1.64 (5.37) 2.40 (7.86) 4.49 (14.8) 5200 90 91.6 10 (250) 0.198 (0.651) 0.369 (1.21) 0.823 (2.70) 1.28 (4.20) 1.91 (6.26) 2700 305 92.1 20 (510) 0.109 (0.358) 0.203 (1.666) 0.451 (1.48) 0.701 (2.30) 1.04 (3.42) 2300 425 93.1 22 (560) 0.0906 (0.297) 0.169 (0.555) 0.378 (1.24) 0.589 (1.93) 0.880 (2.89) p. 591 p. 591 27591-101 p. 591 HJ4.5P-50-(**) HJ5P-50-(**) 41690-78 HJ7P-50A-(**) HJ7SP-50A-(**) 41690-79 HJ12P-50-(**) HJ4RN-50 HJ4RN-50 HJ4RN-50 41690-85 HJ4.5RN-50 HJ4.5RN-50 HJ4.5RN-50 HJ5RN-50 HJ5RN-50 HJ5RN-50 HJ5RP-50 HJ7RN-50A HJ7RN-50A HJ7RN-50A HJ7RP-50A HJ12RN-50 HJ12RN-50 HJ12RN-50 HJ4-50 HJ4.5-50 HJ5-50 HJ7-50A HJ12-50 1/2" 535 5/8" 552 Air Dielectric, HJ Series 7/8" 555 1-5/8" 560 2-1/4" 563
Average Power Rating, kW Standard conditions: VSWR 1.0; ambient temperature 40 C (104 F); inner conductor temperature (as noted); no solar loading. Inner Conductor Temperature, C (F) 30 MHz 100 MHz 450 MHz 1000 MHz 2000 MHz 6000 MHz 10000 MHz 100 (212) 4.40 2.37 1.07 0.690 0.466 0.242 0.175 100 (212) 8.94 4.84 2.20 1.43 0.986 0.525 100 (212) 14.0 7.53 3.38 2.17 1.46 100 (212) 30.8 16.5 7.44 4.79 3.22 100 (212) 43.1 23.1 10.3 6.63 4.44
446

3" 566 Standard Cables HJ8-50B Fire Retardant Cables Low VSWR Cables, Specially Tested 42141 209227 Special Application Cables Characteristics 1640 640 93.3 30 (760) 0.0732 (0.240) 0.141 (0.464) 0.340 (1.12) 0.563 (1.85) 1220 1100 92 40 (1015) 0.0601 (0.197) 0.114 (0.376) 0.268 (0.879) 0.434 (1.42) 960 1890 93.1 50 (1270) 0.0419 (0.138) 0.0789 (0.259) 0.180 (0.590) 960 1690 96.4 50 (1270) 0.0381 (0.125) 0.0748 (0.245) 0.186 (0.612) 42144 42142 HJ11-50 HJ9-50 HJ9HP-50 Air Dielectric, HJ Series 4" 568 5" 570 5" High Power 5" 572
Average Power Rating, kW Standard conditions: VSWR 1.0; ambient temperature 40 C (104 F); inner conductor temperature (as noted); no solar loading. 121 (250) 81.9 0.141 0.340 10.6 121 (250) 123 64.7 27.6 17.1 100 (212) 159 84.5 37.1 150 (302) 335 172 70.8
447

Air Dielectric, High Power HT Series 1/2" 7/8" 538 558 HT4-50 HT4-50 10900 21 92 5 (125) 0.468 (1.54) 0.888 (2.91) 2.06 (6.75) 3.31 (10.9) 5.10 (16.7) 10.7 (35.1) 15.5 (50.7) HT5-50 HT5-50 5200 90 92.5 10 (250) 0.198 (0.651) 0.369 (1.21) 0.823 (2.70) 1.28 (4.20) 1.91 (6.26) Air Dielectric, High Power High Temp., HLT Series 1/2" 543 HLT4-50T HLT4-50T 4000 21.4 93 5 (125) 0.377 (1.24) 0.718 (2.35) 1.67 (5.48) 2.7 (8.85) 4.18 (13.7) Air Dielectric, Plenum HL Series 1/2" 540 HL4RP-50 HL4RP-50 6000 40.0 88 5(125) 0.389 (1.28) 0.725 (2.38) 1.61 (5.28) 2.5 (8.19) 3.71 (12.2) 7.18 (23.6)
Nominal Size Catalog Pages Standard Cables Standard Black Jacket Fire Retardant Cables CATVX, VW-1, IEC 332-1 CATV, UL1581, IEC 332-3, IEEE 383 CATVR, UL1666 (Riser) CATVP, UL910 PLENUM, jacketed CATVP, UL910 PLENUM, unjacketed Special Application Cables High Power/High Temperature Characteristics Maximum Operating Frequency, MHz Peak Power Rating, kW Relative Propagation Velocity, % Minimum Bend Radius, in (mm) 30 MHz 100 MHz 450 MHz 1000 MHz 2000 MHz 6000 MHz 10000 MHz
Average Power Rating, kW Standard conditions: VSWR 1.0; ambient temperature 40 C (104 F); inner conductor temperature 100 C (212 F); no solar loading. Inner Conductor Temperature, C (F) 30 MHz 100 MHz 450 MHz 1000 MHz 2000 MHz 6000 MHz 10000 MHz 200 (392) 11.8 6.21 2.68 1.67 1.08 0.516 0.357 200 (392) 32.7 16.6 6.65 3.92 1.51 200 (392) 12.7 6.70 2.88 1.78 1.15 100 (212) 6.78 3.64 1.64 1.06 0.713 0.368
448
Superflexible, FSJ Series 1/4" 1/2" 574 576 Standard Cables FSJ1-75 Fire Retardant Cables FSJ1RN-75A FSJ1RN-75A FSJ1RN-75A Special Application Cables Characteristics 22000 6.7 78 1 (25) 0.999 (3.28) 1.86 (6.12) 4.17 (13.7) 6.51 (21.4) 9.73 (31.9) 19.1 (62.7) 26.7 (87.6) 11500 10.0 81 1.25 (32) 0.514 (1.68) 0.958 (3.14) 2.14 (7.02) 3.34 (11) 4.98 (16.4) 9.78 (32.1) 13.6 (44.7) 10000 26 88 5 (125) 0.333 (1.09) 0.618 (2.03) 1.37 (4.5) 2.12 (6.97) 3.15 (10.3) 6.09 (20) 8.42 (27.6) 5300 70 89 10 (250) 0.195 (0.639) 0.366 (1.2) 0.834 (2.74) 1.32 (4.34) 2.01 (6.6) 5600 60 90 10 (250 0.209 (0.686) 0.388 (1.27) 0.850 (2.79) 1.29 (4.23) 1.92 (6.30) FSJ4RN-75A FSJ4RN-75A FSJ4RN-75A LDF4RN-75A LDF4RN-75A LDF4RN-75A HJ5RN-75 HJ5RN-75 HJ5RN-75 FSJ4-75A LDF4-75A LDF5-75 HJ5-75 Foam Dielectric, LDF Series 1/2" 7/8" 578 580 Air Dielectric, HJ Series 7/8" 582
Average Power Rating, kW Standard conditions: VSWR 1.0; ambient temperature 40 C (104 F); inner conductor temperature 100 C (212 F); no solar loading. 100 (212) 1.06 0.570 0.255 0.163 0.109 0.056 0.040 100 (212) 3.30 1.77 0.794 0.509 0.341 0.174 0.125 100 (212) 3.10 1.67 0.753 0.486 0.328 0.170 0.123 100 (212) 5.65 3.00 1.32 0.832 0.548 100 (212) 9.31 5.01 2.25 1.49 0.977
449
HELIAX Coaxial Cable Accept No Substitute

HELIAX is the Andrew brand name that stands for the most complete, cost-effective, high performance coaxial cable systems in the world. For more than 40 years, Andrew Corporation has led the industry in meeting the need for semi-flexible RF transmission line. In land mobile, broadcast, cellular, military, terrestrial microwave, HF, earth station, personal communication, and many other applications, HELIAX coaxial cable products, including air and foam-dielectric cable, are the industry standard of excellence. The unique feature that makes HELIAX coaxial cable the best in the world is a solid copper, corrugated outer conductor which gives it strength, durability, flexibility, and complete shielding. These outstanding coaxial cables are complemented by our compatible connectors, hangers, grounding systems and other installation accessories to form a complete RF transmission line system. This broad range of coaxial cable and cable products means that Andrew can provide the right fit for any application you may have, from a single component to a complete, integrated cable system. It also means that all of your transmission line needs can be met by just one vendor Andrew. When you purchase HELIAX coaxial cable from Andrew, youre buying more than just cable. Youre buying quality and performance that will save you money over the life of your system investment. You receive: Outstanding Electrical Performance Long Service Life Simplified System Planning Lower Installation Cost ISO 9001 Certified
Heres a closer look at the benefits: Outstanding Electrical Performance

HELIAX coaxial cable, connectors and accessories are designed to provide optimum electrical performance for a wide range of RF applications. You can be certain that HELIAX coaxial cable systems will perform as you expect with no surprises.
Service Guarantee
At Andrew, were committed to exceeding our customers highest expectations by offering the best products backed by the most responsive service in the industry. So whatever our customers need, whenever and wherever they need it, we will deliver.
HELIAX connectors are designed exclusively for use with HELIAX coaxial cables to provide excellent electrical performance for the complete transmission line system. Low Attenuation The low attenuation of HELIAX coaxial cable results in highly efficient signal transfer which maximizes overall system performance. Complete Shielding Because HELIAX cable has a solid copper outer conductor, you get continuous RFI/EMI shielding to minimize interference and maximize system security.
450

Low VSWR HELIAX feeder cables, LDF4 - LDF7 and VXL series cables, now feature a maximum VSWR of 1.13:1 in the cellular and PCS bands. This specification applies to bulk length cable and includes straight DIN or N-type connectors. Also available are lower VSWR options, or low VSWR in other frequency bands. Refer to the Low VSWR Specifications tables for each cable type. Excellent Intermodulation Performance The solid inner and outer conductors of HELIAX cable virtually eliminate intermodulation generation. Connectors minimize intermodulation by ensuring high contact pressure at the connector to cable interface. High Power Rating The low attenuation and excellent heat transfer properties of HELIAX cables combined with temperature stabilized dielectric materials result in safe long term operation at the high average power levels often required for broadcast, military and other transmit applications.
Long Service Life

When it comes to reliability, HELIAX coaxial cables have built-in quality features to protect your investment and provide long term cost-effective performance. Service and maintenance costs are avoided because HELIAX cable systems are designed to last. All HELIAX coaxial cables are jacketed for direct burial or for corrosive environmental conditions. Standard jacketing material is weather-resistant polyethylene suitable for use in extreme climates. Operational fire retardant CATVX, CATVR and CATVP rated jacketed cables are available to meet safety regulations for indoor installations. The fire retardant cables are UV stabilized and do not require additional UV protection during outdoor storage. See page 631 for information on cable and connector temperature ratings. Strong and Flexible HELIAX cables solid copper, corrugated outer conductor gives it great strength, durability and flexibility. This assures long life as well as ease of installation. Weatherproof and Durable HELIAX cables standard black polyethylene jacketing is weatherproof and ultraviolet stabilized making it suitable for outdoor applications. HELIAX cable is directly buriable and highly resistant to crushing. It is exceptionally corrosion resistant, helping to provide a long term, trouble-free cable system. Many users have been in operation for more than 20 years with the same HELIAX cable.
HELIAX is the registered trademark under which semi-flexible coaxial cables are sold by Andrew. HELIAX cables, connectors and accessories are proprietary products of Andrew manufactured under patents issued and pending.
Reliable The availability of HELIAX cable in long, continuous lengths eliminates the need for joints which can affect reliability.
Simplified System Planning

Selecting a HELIAX cable system will make system planning easy and cost-effective. With Andrew, you have the advantage of our outstanding engineering resources and comprehensive product line. Look at the system planning benefits you receive when you purchase HELIAX coaxial cable: One-Stop Shopping With Andrew one-stop shopping, all of your transmission line needs quality cable, connectors, accessories and service are available from one vendor. You avoid the problems of delivery delays, out-of-sequence deliveries, and non-compliant materials which are frequently the result of dealing with multiple vendors. At Andrew, all of our cable components are engineered to work together as a HELIAX cable system.
451

Free Software and Product Information To help plan your system, Andrew provides a number of helpful software packages. In addition, you can obtain Installation Instruction Bulletins, Special Publications and Product Specifications via Fax-On-Demand and the Andrew web site. Snap-Clean Foam Dielectric Snap-Clean foam dielectric sets a new standard for quick, easy connector installation. With a simple twist, the foam dielectric snaps free of the inner conductor, leaving the solid inner conductor ready for connector attachment with no foam or adhesive residue. Additional cleaning and scraping of the cable are not required. This saves time, money and results in superior electrical performance of the cable and connector. Snap-Clean is featured on HELIAX foam cables with a solid inner conductor.
Lower Installation Cost

The HELIAX cable product line helps lower your field installation costs. Long Continuous Lengths This simplifies installation and eliminates the cost of splicing. Cable lengths can be conveniently stocked on site and cut to required lengths. Flexibility HELIAX cables corrugated copper outer conductor gives it flexibility which makes shipping, handling and installation easier and more cost-effective than rigid line. Ease of Connector Attachment Connectors for HELIAX coaxial cable can be easily attached in the field with standard hand tools. HELIAX connectors provide high resistance to connector pull-off and twist-off as well as excellent electrical contact. Whatever your transmission line needs may be, HELIAX coaxial cables, connectors and accessories made exclusively by Andrew consistently provide you with outstanding electrical performance, long service life, simplified system planning, and lower installation costs.
Fast Delivery Product availability is critical when you have a weather emergency or last minute design change that could result in downtime and lost revenue. In such situations, we respond quickly to get you on-the-air. Rapid product availability allows Andrew to be a real problem solver for you at installation time. With schedules to meet, you need to avoid delivery delays, contain costs, and get your system operating on time. With HELIAX coaxial cable from Andrew, you can do it. Large Variety of Sizes and Types The wide variety of HELIAX cable sizes and types lets you select the best cable for your specific application allowing more cost-effective planning. Optional fire-retardant, nonhalogenated jacketing is available to meet safety regulations for indoor installations. See Cable Selection Guide on pages 442 - 449. Factory Connector Attachment For your convenience, HELIAX cables can be ordered cut to length and factory fitted with connectors per your specifications. This service helps you avoid field assembly and testing.
ISO 9001 Certified

ISO 9001 is the internationally recognized standard for quality systems. It was designed to provide a thorough, yet flexible model for quality systems design and implementation. Andrew facilities have successfully completed the requirements of ISO 9001, the most stringent portion of the standard. This certification resulted from a consistent quality system that involves everyone in the organization in improving both internal and external quality.
452
HELIAX Coaxial Cable Types
Foam dielectric (LDF Series) Flexible Feeder (VXL Series) Superflexible foam dielectric (FSJ and ETS Series) Extraflexible foam dielectric (EFX Series) Superflexible star dielectric (HS and HST Series) Air dielectric (HL, HT and HJ Series)
453
Superflexible and Extraflexible Cables
Superflexible and Extraflexible Cables HELIAX superflexible and extraflexible cables are designed for ease of installation in tight wiring spaces in shelters, radio rooms, and plenums. These cables are perfect for antenna and equipment room jumpers. Like all HELIAX cables, superflexible cables feature a solid outer conductor for unsurpassed electrical and mechanical performance. A polyethelene foam dielectric offers excellent electrical performance and prevents water migration.
Flexibility Andrew HELIAX superflexible cables are manufactured with deep, helical corrugations in the outer conductor. Extraflexible cables are manufactured with deep, annular corrugations. These exclusive corrugating processes permit Andrew cables and assemblies to be bent on very tight radii, without any degradation in performance. In addition, numerous reverse bends can be made, again without loss in performance. Superior Electrical Performance HELIAX cables and assemblies offer specifiers and users superior electrical performance in smaller sized cables. HELIAX cables and assemblies provide excellent attenuation and superior power handling and shielding versus comparably sized braided cables. Excellent Intermodulation Performance The solid inner and outer conductors found in all HELIAX cables minimize intermodulation generation. The braided outer conductors and stranded inner conductors that are
common in other cables form numerous contacts in the electrical path, which are sources of intermodulation. Complete Product Range Andrew now offers a complete range of cables to meet every application and budget requirement. HELIAX superflexible and extraflexible cables are available in a wide range of sizes and constructions for general use, plenum, and flame retardant applications. The HS series cables feature a star-shaped dielectric and superflexible construction. They are for use in plenum applications. The HST superflexible cables are for high power applications. These new cables feature a star-shaped dielectric which offers higher power handling at higher temperatures than any other flexible cable. A wide selection of connectors and factory manufactured assemblies in both standard and custom jumper configurations is available, to complement Andrew cable and make system planning easy and simple.
454
Flexible Feeder Cables
New VXL Series of Flexible Feeder Cables HELIAX flexible feeder cables are designed for use in difficult areas. They are more flexible than LDF series, while maintaining similar attenuation characteristics. 7/8" VXL5-50 is suitable for use as a one-piece feeder line from radio equipment to antenna, thus eliminating the need for jumper cables.
Superior Performance New VXL series flexible feeder cable uses advanced processing technology to provide a lower cost/higher performance solution that is ideal for wireless applications. System designers and engineers can eliminate the need for jumper cables when VXL5-50, a 7/8" feeder cable, is specified. It is suitable for continuous cable runs from the base station cabinet to the antenna. When used as one-piece feeder line, VXL5-50 requires no jumper cable from feeder to antenna. This eliminates extra connectors, lowering insertion loss, and minimizing installation time. Versatile and flexible, VXL series cable is also suitable for installation in difficult areas such as lift shafts, monopoles, and co-located sites. Lower Site Costs VXL5, VXL6, and VXL7 cables are lighter weight than standard series cables. The cable's reduced weight and tighter bending radius minimize installation time and lower site costs. Jumper cables are not required with
VXL5-50. This means fewer connectors, less weatherproofing, and lower costs. The lighter weight of VXL series cable also reduces shipping costs. Outstanding Electrical Performance All VXL series cables have a closed-cell, foam polyethylene dielectric that prevents water migration and maintains its characteristics over time. The low-density foam provides low attenuation characteristics similar to LDF series cables. When used as a combined feeder/jumper solution, both system attenuation and system VSWR are optimized. Flexibility The VXL5 cable exhibits the tight bend radius of a 1/2" jumper. It, therefore, requires no jumpers when used as a main feeder. When the cable is used as a stand-alone jumper, it is the lowest-loss jumper solution in the industry.
455
LDF Series Foam Dielectric Cables
Foam Dielectric Cables Superior Electrical Performance Like the FSJ and EFX cables, LDF cables have a closed-cell, foam-polyethylene dielectric that prevents water migration and maintains its characteristics over time. LDF cables are designed for low loss. Their lower density foam allows higher velocities and provides lower attenuation than FSJ cables. Attenuation characteristics approach those of air dielectric cables.
Flexibility HELIAX foam dielectric cables feature an annularly corrugated outer conductor that provides excellent shielding while offering flexibility. Complete Product Range LDF cables are available in sizes from 1/4" to 2-1/4" to meet application requirements for cellular and personal communications, land mobile radio, earth station antenna jumpers, equipment room and antenna jumpers, CATV, HF communications, VLF, military data links, AM and FM broadcast, terrestrial microwave, and CCTV. Phase stabilized versions are available.
Weatherproof Closed cell dielectric prevents water penetration. Connector O-rings seal out moisture. Excellent Intermodulation Performance Solid inner and outer conductors eliminate IM generated by numerous moving contacts in the current path that are found with stranded inner conductors and braided outer conductors. Quick and Easy Connector Attachment A range of self flaring connectors are available for easy field attachment requiring no special tools.
456
Air Dielectric Cables
Air Dielectric Cables HELIAX air dielectric cables from Andrew, available in 1/4" to 5" sizes, are designed to give you the lowest attenuation and highest average power rating. When these cables are equipped with the proper pressurization systems, they may be used in any indoor/outdoor environment. Air cables, if used indoors in a controlled environment, do not require pressurization.
The HJ air cables have a polyethylene or polypropylene spacer, and different jacketing materials dependent on fire retardancy requirements. High power HJ series cables use a special fluoropolymer spacer for maximum power handling with excellent attenuation. The cables are ideal for antenna feeder applications such as AM and FM radio, UHF and VHF TV, terrestrial microwave and earth station antenna systems, land mobile and cellular radio, ITFS, MMDS and MDS antenna systems, HF communications, military communications and radar. The HL air cables utilize a polyethylene spiral to space the inner conductor from the outer conductor, and a fluoropolymer jacket to provide fire retardancy. These cables are intended for indoor plenum type applications. The HT air cables use a fluoropolymer spiral to space the inner from the outer, and are unjacketed. These cables are for high temperature and/or high power applications.
Solid Copper Corrugated Outer Conductor Results in low loss, continuous RFI/EMI shielding to minimize interference and maximize system security. Corrugated outer conductor allows for ease of installation. High Power Handling Results from low attenuation and excellent heat transfer characteristics. Weatherproof/Pressure Tight HJ type cables have silicone gasketed connectors with 1/8" NPT pressure inlets. Connectors are designed to be pressure tight for maximum protection against water entry. System Integrity If a pressurized air-dielectric cable should be damaged, the pressurization system will alarm so that the leak can be corrected before water enters the cable and degrades performance. Rugged Construction HELIAX HJ cables are made with the strongest dielectric spacer in the industry, to withstand the stress of installation.
The Outstanding Features of HELIAX Air-Dielectric Cables are:

Low Attenuation Low loss dielectric materials combined with high conductivity copper conductors result in low attenuation for efficient signal transfer and maximum system performance.
457
HELIAX Cables and Connectors Now with Ten Year Warranty
An extended ten-year warranty is now included, at no extra charge, on all new purchases of HELIAX coaxial cable, connectors and cable assemblies. Here are the details of this exclusive warranty: Complete coverage against defects in material and workmanship for HELIAX cables, connectors and assemblies. When connectors are attached by Andrew or an Andrew certified distributor, the attachment is also covered. Any HELIAX coaxial cable that has been fitted with non-Andrew connectors is expressly excluded from this extended warranty and is subject to the terms of the Andrew standard one-year warranty.
458
HELIAX Coaxial Cable... Todays Alternative to Braided Cable
Excellent Intermodulation Performance HELIAX coaxial cables and connectors minimize intermodulation generation by using solid conductors. Stranded inner conductors and braided outer conductors, used in many other cables, form numerous contacts within the current path which are a source of intermodulation. Complete RF Shielding Unlike braided cables, HELIAX coaxial cables have a solid corrugated copper outer conductor to protect against electromagnetic interface and radio frequency interference (EMI and RFI). Phase Stability HELIAX coaxial cables offer excellent phase stability over temperature variations and with bending. This makes them an excellent choice for phase-critical applications such as delay lines and matched feeders in phased-array antennas. Low Attenuation The continuous outer conductor and low loss polyethylene foam dielectric of HELIAX cables result in much lower losses than comparably sized braided cables. High Power Capability The excellent thermal conductivity and the low attenuation of HELIAX cables provide for higher average power handling capability when compared to comparably sized braided cables.
Flexibility HELIAX coaxial cables have excellent flexibility for ease of installation. These cables can be bent on small radii and will withstand repeated bends without degrading performance. Weatherproof and Durable for Outdoor Applications HELIAX coaxial cables are protected with a rugged black polyethylene jacket which provides abrasion resistance and complete environmental protection. Unlike braided cables, they can be used outdoors without the fear of water migration. Fire Retardancy HELIAX coaxial cables are available with special jacketing to meet relevant fire retardance standards. See page 626.
459
HELIAX Coaxial Cable vs Coventional Braided Cables*

HELIAX Coaxial Cables
Standard Superflexible FSJ1-50A FSJ2-50 FSJ4-50B Nominal Size 1/4" 3/8" 1/2" Impedance, ohms 50 50 50 Electrical Characteristics Relative Propagation Velocity, % 84 Maximum Operating Frequency, MHz 20400 83 13400 81 10200 85 13500 86 15800 88 13500 88 8800 84 10000 83 13400 81 10200 Extraflexible EFX2-50 3/8" 50 LDF1-50 1/4" 50 LDF Series LDF2-50 3/8" 50 LDF4-50A 1/2" 50 HS1RP-50 1/4" 50 Plenum Rated HS2RP-50 HS4RP-50 3/8" 1/2" 50 50
Attenuation, dB/100 ft (dB/100 m) Standard conditions: VSWR 1.0; ambient temperature 20 C (68 F). 150 MHz 450 MHz 824 MHz 960 MHz 1500 MHz 2000 MHz 4000 MHz 6000 MHz 10000 MHz 2.21 (7.25) 3.91 (12.8) 5.38 (17.6) 5.38 (19.1) 7.41 (24.3) 8.67 (28.5) 12.8 (41.8) 16.1 (52.7) 21.7 (71.2) 1.48 (4.86) 2.64 (8.66) 3.66 (12.0) 3.97 (13.0) 5.08 (16.7) 5.97 (19.6) 8.90 (29.2) 11.3 (37.2) 15.5 (50.8) 1.28 (4.21) 2.31 (7.59) 3.23 (10.6) 3.52 (11.6) 4.54 (14.9) 5.37 (17.6) 8.15 (26.7) 10.5 (34.4) 14.6 (47.9) 1.34 (4.39) 2.39 (7.83) 3.31 (10.8) 3.59 (11.8) 4.60 (15.1) 5.41 (17.8) 8.08 (26.5) 10.3 (33.8) 14.1 (46.3) 1.52 (4.99) 2.71 (8.88) 3.74 (12.3) 4.07 (13.3) 5.19 (17.0) 6.1 (20) 9.06 (29.7) 11.5 (37.7) 15.7 (51.5) 1.29 (4.24) 2.29 (7.51) 3.17 (10.4) 3.44 (11.3) 4.40 (14.4) 5.17 (17) 7.70 (25.3) 9.79 (32.1) 13.4 (43.9) 0.815 (2.67) 1.45 (4.75) 2.00 (6.56) 2.17 (7.12) 2.77 (9.09) 3.25 (10.7) 4.82 (15.8) 6.11 (20.1) 2.13 (6.99) 3.75 (12.3) 5.14 (16.9) 5.58 (18.3) 7.06 (23.2) 8.24 (27.0) 12.0 (39.5) 15.1 (49.5) 20.2 (66.2) 1.48 (4.84) 2.61 (8.56) 3.59 (11.8) 3.89 (12.8) 4.94) (16.2) 5.78 (19.0) 8.49 (27.8) 10.7 (35.1) 14.4 (47.2) 1.17 (3.83) 2.07 (6.78) 2.85 (9.35) 3.09 (10.2) 3.94 (12.9) 4.62 (15.2) 6.8 (22.4) 8.63 (28.3) 11. (38.4)
Average Power Rating, kW Standard conditions: VSWR 1.0; ambient temperature 40 C (104 F); inner conductor temperature 100 C (212 F), except HST Series 200 C (392 F). 150 MHz 450 MHz 824 MHz 960 MHz 1500 MHz 2000 MHz 4000 MHz 6000 MHz 10000 MHz 1.00 0.567 0.412 0.380 0.299 0.256 0.174 0.138 0.102 1.74 0.975 0.704 0.648 0.507 0.431 0.289 0.228 0.166 2.49 1.38 0.991 0.909 0.705 0.597 0.394 0.306 0.220 1.74 0.978 0.706 0.649 0.507 0.431 0.289 0.227 0.165 1.45 0.818 0.592 0.545 0.426 0.363 0.245 0.193 0.141 1.81 1.02 0.736 0.678 0.530 0.451 0.303 0.239 0.175 2.83 1.59 1.15 1.06 0.833 0.710 0.479 0.378 0.691 0.393 0.286 0.264 0.209 0.179 0.123 0.098 0.073 1.18 0.670 0.487 0.449 0.354 0.302 0.206 0.164 0.121 1.46 0.821 0.595 0.549 0.431 0.368 0.249 0.197 0.145
Mechanical Characteristics Diameter over jacket in (mm) Weight lb/ft (kg/m) 0.045 (0.067) 0.078 (0.12) 0.14 (0.21) 0.09 (0.13) 0.06 (0.09) 0.08 (0.12) 0.15 (0.22) 0.063 (0.093) 0.076 (0.113) 0.138 (0.205) 0.29 (7.4) 0.415 (10.5) 0.52 (13.2) 0.45 (11.3) 0.345 (8.8) 0.44 (11.2) 0.63 (15.9) 0.29 (7.37) 0.415 (10.5) 0.518 (13.16)
Min. Bending Radius in (mm) 1 (25) 1 (25) 1.25 (32) 1.75 (45) 3 (76) 3.75 (95) 5 (125) 1 (25) 1 (25) 1.25 (32)
460
Conventional Braided Cables

Standard Superflexible FSJ1-75 FSJ4-75A 1/4" 1/2" 75 75 LDF Series LDF4-75A 1/2" 75 Commercial Version of RG-213/U
M17/74 RG-213/U
M17/75 RG-214/U
M17/60 RG-142B/U
M17/127 RG-393/U
M17/2 RG-6/U
M17/6 RG-11/U
78 22000
81 11500
88 10000
65.9 1000
65.9 11000
84
69.5 12400
69.5 11000
65.9 3000
65.9 1000
2.31 (7.57) 4.17 (13.7) 5.83 (19.1) 6.36 (20.9) 8.22 (27.0) 9.73 (31.9) 14.8 (48.6) 19.1 (62.7) 26.7 (87.6)
1.19 (3.89) 2.14 (7.02) 2.99 (9.82) 3.26 (10.7) 4.21 (13.8) 4.98 (16.4) 7.58 (24.9) 9.78 (32.1) 13.6 (44.7)
0.764 (2.51) 1.37 (4.50) 1.91 (6.26) 2.08 (6.81) 2.67 (8.76) 3.15 (10.3) 4.75 (15.6) 6.09 (20.0) 8.42 (27.6)
2.6 (8.5) 5.0 (16.4) 7.4 (24.3) 8.5 (27.9)
2.9 (9.5) 5.5 (18.0) 7.8 (25.6) 8.6 (28.2) 11.3 (37.1) 13.6 (44.6) 21.6 (70.9) 28.6 (93.8) 41.4 (136)
1.5 (4.9) 2.8 (9.2) 4.0 (13.1) 4.4 (14.4) 5.8 (19.0) 7.0 (23.0) 11.1 (36.4) 14.7 (48.2)
4.6 (15.1) 8.4 (27.6) 11.8 (38.7) 13.0 (42.7) 16.9 (55.4) 20.2 (66.3) 31.4 (103) 41.1 (135) 58.5 (192)
2.7 (8.8) 4.9 (16.1) 7.0 (23.0) 7.6 (24.9) 10.0 (32.8) 11.9 (39.0) 18.5 (60.7) 24.2 (79.4) 34.5 (113)
3.6 (11.8) 6.7 (22.0) 9.6 (31.5) 10.6 (34.8) 14.0 (45.9) 16.9 (55.4)
2.7 (8.8) 5.1 (16.7) 7.5 (24.6) 8.6 (28.2)
0.460 0.255 0.182 0.167 0.129 0.109 0.072 0.056 0.040
1.43 0.794 0.568 0.521 0.403 0.341 0.224 0.174 0.125
1.35 0.753 0.541 0.497 0.387 0.328 0.218 0.170 0.123
0.91 0.44 0.29 0.26
0.91 0.44 0.29 0.26 0.19 0.16 0.096 0.070 0.046
1.2 0.58 0.39 0.35 0.26 0.21 0.12 0.088
2.1 1.1 0.79 0.73 0.56 0.47 0.29 0.22 0.14
5.4 2.9 2.0 1.8 1.4 1.2 0.76 0.58 0.40
0.42 0.19 0.13 0.11 0.083 0.068
0.57 0.26 0.17 0.15
0.29 (7.4)
0.52 (13.2)
0.63 (16)
0.405 (10.29)
0.425 (10.79)
0.405 (10.29)
0.195 (4.95)
0.390 (9.91)
0.332 (8.43)
0.405 (10.29)
0.046 (0.068)
0.14 (0.21)
0.14 (0.21)
0.11 (0.164)
0.13 (0.193)
0.089 (0.132)
0.043 (0.064)
0.175 (0.260)
0.082 (0.122)
0.098 (0.146)
1 (25)
1.25 (32)
5 (125)
5 (125)
6 (150)
6 (150)
2 (50)
4 (102)
3 (75)
4.5 (115)
* Braided cables not supplied by Andrew. Listing is for comparative purposes only.
U.K. 0800-250055 Australia 1800-803 219 New Zealand 0800-441-747 Revised 6/01
461
HELIAX Connectors
Premium Performance Connectors Complement HELIAX Coaxial Cables

Andrew offers an extensive line of connectors for HELIAX coaxial cables. Used together, HELIAX cables and connectors produce the highest quality transmission line available. HELIAX connectors are designed and manufactured by Andrew. Using HELIAX cable and connectors ensures exceptional electrical and mechanical performance. Only HELIAX connectors are designed to be completely compatible with HELIAX cable. With many interfaces and attachment styles available, you can be sure you will get the characteristics you want and the performance you can rely on.
462
HELIAX Connectors
HELIAX Connectors Offer Multiple Design Advantages
Easy Attachment HELIAX connectors are designed for fast, accurate installation. Features like pre-set pin depths and self-flaring mechanisms ensure performance and reduce costly installation errors. The connectors can be attached with the most basic hand tools. Attachment time can be reduced, even further, with EASIAX cable preparation tools. Each connector is shipped with easy to read instructions to assist with installation. Weatherproof Integrity HELIAX connectors are designed to ensure system integrity in the harshest of outdoor environments. Our connectors are relied on around the world for their ability to withstand heat, humidity, ice, and rain. We design to the toughest environmental standards, such as IP68, to ensure the connectors are waterproof without additional weatherproofing. We test before and after thermal cycling, shock, and vibration testing. We guarantee that, whatever the environment, you can rely on HELIAX connectors. Low Intermodulation HELIAX connectors are designed to keep unwanted intermodulation to a minimum. Andrew is one of a few companies, worldwide, that understands and has the ability to measure intermodulation accurately. Couple this with engineers skilled in minimizing intermodulation and you get connectors with some of the lowest recorded intermodulation levels in the industry. For a more detailed explanation of intermodulation see page 630. Low VSWR HELIAX connectors give you unrivalled VSWR performance. They are designed for a minimum mismatch between cable and connector. This is especially important in today's systems where performance expectations are more stringent. Electrical, mechanical, and environmental testing of all HELIAX connectors ensure lasting performance that can be measured in decades. Data sheets are available on request for all HELIAX connectors. Excellent RF Shielding Outer conductor attachments clamp or solder 360 around the cable resulting in virtually complete shielding. HELIAX connectors for air dielectric cables are not interchangeable with those for foam dielectric cables. HS and HST series cables use corresponding FSJ connectors. Differences include: Air dielectric connectors are equipped with gas ports to allow pressurization of the cable. Most air dielectric connectors are available in both gas barrier and gas pass versions. The gas barrier prevents air flow to the mating connector. Air dielectric cables have a helical corrugated outer conductor. LDF foam cables have annular corrugations and thus use a different clamping nut to secure the connector to the cable. Most air dielectric connectors are attached using a snip flare. LDF foam connectors are self flaring.
463
HELIAX Connectors
1 One iece
TM
With only one piece to the connector, attachment is as easy as sliding the connector on the cable and tightening the back nut. You can be assured that field attachment is consistent and gives you outstanding performance every time! More importantly, the new one-piece connectors also have outstanding electrical characteristics! Completely Waterproof, Mated and Unmated The new one-piece connector is not only waterproof when mated, it is also waterproof when it is unmated and completely submerged in water. This moisture seal provides unparalleled protection from the elements! Exceeds IP66 and IP68 Standards. New Version 2 Connectors for FSJ4-50B The newest connectors for FSJ4-50B have a reduced number of components and incorporate our new crush-flare technology. Installation is fast, reliable, and dependable. EASIAX Plus automated cable prep tools are also available for the new version 2 connectors. New SureFlex Connectors New SureFlex jumper assemblies incorporate a 360 degree solder attachment on both the inner conductor and the outer conductor. Factory made assemblies remove the risks sometimes encountered with assemblies made in the field. Return loss, insertion loss and intermodulation values are optimized with our new SureFlex assemblies. Proven All Andrew components go through a strict qualification process to the toughest Military and International standards before being released. Test procedures are available on the Andrew web site or contact Andrew. In all ways electrically, mechanically, and environmentally you can be sure with Andrew. Value All of the new designs offer price savings as well as outstanding performance.
New OnePiece Connectors

Installation is fast and reliable Performance is excellent and dependable Connectors are completely tested and proven New one-piece connectors speed installation, insure attachment consistency, and provide unparalleled protection for your transmission line and system. Speed and Reliability With the combination of the EASIAX Plus automated prep tools and one-piece connectors, attaching connectors to transmission lines couldn't be easier or more reliable. The automated prep tool consistently and completely prepares the cable for connector attachment in less than 15 seconds.
464
HELIAX Connectors
Connector Numbering System
This catalog features a functional, connector type numbering system that installation, purchasing and receiving personnel should find easy to understand. Here are three examples and the functional type number cable, connector, and suffix keys. Type Number: L2PNM L2 denotes it is used with LDF2-50 cable PNM denotes it is a plated N Male Type Number: L4PNF L4 denotes it is used with LDF4-50 cable PNF denotes it is a Plated N Female Type Number: F4PDM-C F4 denotes it is used with FSJ4-50B cable PDM denotes it is a Plated 7-16 DIN Male C denotes it features a captivated pin
Cable Keys E2 F1 F2 F4 H4 H4.5 H5 H7 H8 H11 H9 H9HP H12 L1 L2 L4 L4.5 L5 L6 L7 L12 V5 V6 V7 Connector Keys PNM PNR PNF PBM PSM PSF PSR PDM Plated N Male Plated N Male Right Angle Plated N Female Plated BNC Male Plated SMA Male Plated SMA Female Plated SMA Male Right Angle Plated 7-16 DIN Male EFX2-50 FSJ1-50A FSJ2-50 FSJ4-50B HJ4-50 HJ4.5-50 HJ5-50 HJ7-50A HJ8-50B HJ11-50 HJ9-50 HJ9HP-50 HJ12-50 LDF1-50 LDF2-50 LDF4-50A LDF4.5-50 LDF5-50A LDF6-50 LDF7-50A LDF12-50 VXL5-50 VXL6-50 VXL7-50 3/8" 1/4" 3/8" 1/2" 1/2" 5/8" 7/8" 1-5/8" 3" 4" 5" 5" (High Power) 2-1/4" 1/4" 3/8" 1/2" 5/8" 7/8" 1-1/4" 1-5/8" 2-1/4" 7/8" 1-1/4" 1-5/8" Connector Keys (Continued) PDF PDR PKM PKR PTM PTF SM SF UM UF MU FM M F Suffix Keys HF BH 7550 7570 C PM PMC H BHC PMC T HC PR RC RPC B P High Frequency Bulkhead 75-Ohm Cable, 50-Ohm Mating Pin 75-Ohm Cable, 70-Ohm Mating Pin Captivated Pin Inner Attachment (solderless) Panel Mount Panel Mount, Captivated Pin Hex Coupling Nut Bulkhead, Captivated Pin Panel Mount, Captivated Pin Tunable Hex Coupling Nut, Captivated Pin Inner Contact Attachment Pressure Port Ring Flare, Captivated Pin Inner contact Attachment One-Piece Connector, Captivated Pin Gas Barrier Gas Pass Plated 7-16 DIN Female Plated 7-16 DIN Male Right Angle Plated 4.1-9.5 DIN Male Plated 4.1-9.5 DIN Male Right Angle Plated TNC Male Plated TNC Female SMA Male SMA Female UHF Male UHF Female Mini UHF Male CATV F Male EIA Flange Male EIA Flange Female
Connector Data
Coupling Torque for All Type N and 7-16 DIN Connectors Type N lbf-in (Nm) 15-20 (1.7-2.3) 7-16 DIN lbf-in (Nm) 220-265 (25-30)
Pin Depth for Type N and 7-16 DIN Connectors Connector N Male N Female 7-16 DIN Male 7-16 DIN Female Pin Depth, in (mm)* 0.210-0.230 (5.28-5.84) 0.187-0.207 (4.75-5.26) 0.058-0.070 (1.47-1.78) 0.070-0.082 (1.78-2.08)
* High frequency performance may be enhanced by adjusting pin depth to minimize the gap between male and female connectors.
465
HELIAX Connectors
The pictures below and on pages 467-470 show the various connector interfaces and body styles available for HELIAX cables. In many cases, a single picture is used to represent several similar connectors. See the connector ordering information charts for details.
N Males
For FSJ1, FSJ2, FSJ4 Cables
For LDF1, EFX2 Cables
For LDF2, LDF4, HLT4, FSJ4 Cables
For LDF5, LDF6, LDF7 Cables
For HJ4, HT4, HJ5, Cables
Right Angle N Males
For FSJ1 Cable
For LDF4 Cable
For FSJ4 Cable
Bulkhead N Females
N Females
For FSJ1 Cable
For FSJ2,FSJ4 Cables
For HJ4, HT4, HJ5, HT5, HJ7, HJ12 Cables
For FSJ2, FSJ4 Cables
For LDF1, LDF2, LDF4, EFX2, HLT4 Cables
Mini UHF Male
UHF Males
For FSJ1 Cable
For FSJ1 Cable
For LDF2, EFX2, LDF4, HLT4, FSJ4 Cables
For LDF5, Cable
466
HELIAX Connectors
UHF Females
For FSJ1 Cable
For LDF2, EFX2, LDF4, HLT4, FSJ4 Cables
For LDF5 Cable
For HJ4, HT4, HJ5 Cables
SMA Males
SMA Females
4.1-9.5 DIN Males
For FSJ1 Cable For FSJ1 Cable For FSJ1 Cable
For LDF2, FSJ4 Cables
Right Angle 7-16 DIN Males
For FSJ2, FSJ4 Cables
For LDF4, LDF5 Cables
7-16 DIN Males
For FSJ1, FSJ4, FSJ2, LDF2 Cables
For LDF4, HLT4 Cables
For LDF5, LDF6, and LDF7 Cables
For LDF5, LDF6, and LDF7 Cables
7-16 DIN Females
For FSJ1, FSJ2, FSJ4, LDF2 , EFX2 Cables
Bulkhead for FSJ4 Cable
For LDF5 Cable
Panel Mount for FSJ1, FSJ4 Cables
For LDF4, HLT4 Cables
467
HELIAX Connectors
SC Male LC Males
For LDF4, FSJ4 Cables
For LDF4,HLT4, LDF5, Cables
BNC Male
For FSJ1 Cable
For HJ5 Cable
TNC Males
LC Females
For FSJ1 Cable
For HJ7, LDF6 Cables
TNC Females
HN Males
For FSJ1 Cable
For LDF2, EFX2, LDF4 Cables
For FSJ4 Cable
For LDF4, HLT4, LDF5, Cables
CATV Type F Males
CATV Equipment Housing
For FSJ1 Cable
For FSJ4 Cable
For LDF4 Cable
468
HELIAX Connectors
7/8" EIA Flanges
For FSJ4, LDF4, LDF5 Cables
For HJ4, HJ5 Cables
For HJ7, HJ12 Cables
1-5/8" EIA Flanges
3-1/8" EIA Flanges
Female For LDF6, LDF7 Cables For HJ12, HJ8, HJ11, LDF12 Cables
Male For HJ7, HJ12 Cables For HJ8, HJ11 Cables
469
HELIAX Connectors
4-1/2" IEC Flanges F Flanges, Male
For HJ11, H9 Cables
For HJ11, H9 Cables
6-1/8" EIA Flanges
For LDF6, LDF7 Cables For HJ11 Cable
For HJ9, HJ9HP Cables
Splices
For HJ4, HJ5, HJ7 Cables
For HJ8, HJ9, HJ11, HJ12 Cables
End Terminals
For LDF5 Cable
For HJ4, HT4, HJ5, HT5 Cables
For LDF4 Cable
For HJ7 Cable
470
HELIAX Accessories
Andrew offers the industry's widest range of accessories, which are designed to be compatible with HELIAX cable. Together, HELIAX cables and accessories form a lasting and effective transmission line system. System designers and installation crews can rely on Andrew for high quality, easy to install components and reliable maintenance-free performance.
All versions incorporate silver plated components and highpressure components throughout to ensure low levels of intermodulation and excellent VSWR performance. Arrestor Plus surge protectors are also fully weatherproof, making them suitable for a variety of outdoor applications. Grounding Kits. All Andrew grounding kits are designed to withstand 99% of all possible lightning strikes for certainty of continued operation. The non-braided, solid copper construction of our grounding kits eliminates corrosion caused by moisture retention and wicking. The new SureGround kits offer even greater installation ease than standard grounding kits. The new grounding kits are factory assembled into one component and feature a pre-formed, clip-on ground strap for easy snap-on installation. A standard weatherproofing kit (tape) is provided with SureGround versions and a weatherproofing boot is supplied with the SureGround Plus versions.
Some of Our Key Accessories Are:

Arrestor Plus Surge Protectors. Lightning surge protectors incorporate quarterwave stub technology. Designed to deliver optimum system performance and reliable equipment protection you can count on, strike after strike. Arrestor Plus is available in the slim profile universal (APM series) or the Integrated versions (APTL series) that attach directly onto LDF series HELIAX cable. Arrestor Plus gas tube arrestors (APG series) give you broadband performance and feature dc pass capability through the center conductor to the active tower top electronics. The unit's removable cap makes periodic maintenance fast and easy.
471
Entry Port Systems. Andrew offers entry port systems to meet your every need. The ArrestorPort II integrates your cable entry and grounding systems into a single integrated system and cuts installation time and component costs. It is designed to work with the Arrestor Plus Surge Protectors. The new, low cost, SNAP-IN Entry port quickly and easily snaps into a hole in a cabinet or metal plate. It's used in combination with our one-piece entry boot to adapt to your requirements. For traditional installations consider our standard entry port products. Hangers. Stainless steel construction of both the standard and our new Snap-in hangers ensures corrosion resistance and long life. The new Snap-In hangers feature an ergonomic design that provides easy attachment with no hardware required. Our Click-On hanger products are stackable and install in minutes to provide a perfect fit for applications where space is tight. Click-On hangers are manufactured from tough, UV-resistant material and set the standard for durability, simplicity, and cost effectiveness. Weatherproofing. The WeatherShield Connection Protection Housing provides you with security against water. WeatherShield easily installs in seconds, to
complete your transmission line system and protect against the environment. WeatherShield provides an additional measure of system protection by providing a water-tight seal around the cable and dampening the vibration that can loosen connector interfaces. The WeatherShield takes just seconds to install. Simply place the WeatherShield around your connection and snap in place. No tapes, heat guns or shrink tubes are required. EASIAX Plus Cable Preparation Tools. Our EASIAX Plus Cable Prep tools provide you with all you need to install HELIAX connectors on HELIAX Cable. EASIAX Plus automated tools dramatically reduce cable preparation time and expense while improving overall system performance. Fit the EASIAX Plus tool to any standard drill and the tool does the rest. You will be able to fit your connector in about 15 seconds and your connector attachments will be consistent, reliable, and repeatable. For greatest accuracy, when installing connectors, we recommend that you use our pre-set torque wrenches. This will ensure the high quality protection and performance that you expect from Andrew.
Andrew Factory Made Cable Assemblies

When you specify or purchase a jumper from Andrew, you can rest assured that the product has been manufactured by highly trained individuals utilizing factory automated processes. We are so confident in our quality that we guarantee it! Check out all the advantages of the Andrew factory made cable assembly program: Fast delivery...When and where you want it Popular jumpers are in stock for immediate delivery...No waiting 100% testing...Ensures performance 10 year warranty...Cable, connectors, and attachment are guaranteed Andrew has cable assembly facilities all over the world to provide you with the best jumper quality and service. Our local assembly locations can provide you with fast delivery, often in 24 hours. Making assemblies in the field can be difficult and expensive. Proper training, tools and environmental conditions can all impact the cost and quality of a cable assembly. As you know, a poorly made cable assembly can affect system performance. Attachment performed by highly trained personnel... We do the job right Special lengths per your specifications Select from the wide variety of Andrew cables and connectors... One-stop-shopping simplifies sourcing Jumpers are available for flame retardant, high power/high temperature, and plenum applications
472
HELIAX coaxial cables are available with connectors attached at one or both ends or with both connectors unattached.
Ordering Information
3. Specify connector Type Numbers and attached or unattached. When attached connectors on an assembly are different, specify which is first off the reel. 4. Specify any special requirements: Special marking on packages Packaging requirements (standard, export or special) Special inspection requirements, such as customer, government, certificate of compliance 5. Specify mode of shipment (surface, air or ocean) and requested ship date. Sample orders are illustrated below.
To order, please specify the following:

1. Specify cable or waveguide Type Number and length in feet or meters. 2. For low-VSWR cables and for elliptical waveguides, specify the operating frequency band when requested. VSWR specifications for various frequency bands are presented on the product information pages. Frequency band codes, which are included in the identifying Andrew Type Number, are used with most standard bands of low VSWR cable and premium elliptical waveguide. For example, the -59 suffix for EWP52-59 designates a frequency band of 5.925 - 6.425 GHz. Please use these codes, where applicable.
Sample Orders
Andrew Type Number Description HELIAX Coaxial Cable Assembly 1850 -1990 MHz L5PDM L5PNM Connector, attached, first off Connector, attached, last off 1 1 Frequency (where) applicable) Quantity 1 Length Each 290 ft Total Length 290 ft Unit or Per Foot Extended Price Price
Cable, Factory Assembly
LDF5P-50A-18
Bulk Cable and Connectors Cable with One Attached Connector
LDF5-50A L5PNM LDF5-50A L5PNM L5PNM
HELIAX Coaxial Cable Connector, unattached HELIAX Coaxial Cable Connector, attached, first off Connector, unattached
2 8 1 1 1
700 ft
1400 ft
310 ft
310 ft
EWP52-59
Elliptical Waveguide 5.925 - 6.425 GHz Connector, attached, first off Connector, attached, last off Elliptical Waveguide 5.925 - 6.425 GHz Connector, unattached Elliptical Waveguide 5.925 - 6.425 GHz Connector, attached, first off Connector, unattached
1 1 1 2 8 1 1 1
290 ft
290 ft
Elliptical Waveguide Factory Assembly Bulk Elliptical Waveguide and Connectors Elliptical Waveguide with One Attached Connector
252DET 152DET EWP52-59 252DET EWP52-59 252DET 152DET
700 ft
1400 ft
310 ft
310 ft
*For cables and waveguides, specify whether connectors should be factory attached or shipped loose. When attached connectors on an assembly are different, specify which is first off the reel. For microwave antennas, specify any desired options.
Special marking on packages: Packing requirements: Special (specify)
Standard
Export
Ship by:
Surface
Air
Ocean
Requested ship date: OK to ship early?
Requested Carrier (If none specified, we will use the most economical method) Shipping charges: Collect
X Yes
Sales: Resale no.
No
Partials OK?
X Yes
Not Applicable
No
Prepay and bill
Applicable
Quoted fixed freight amount Specify special inspection requirements, such as customer, government, certificate of compliance.
473
1/4" Superflexible Foam Dielectric, FSJ Series 50-ohm
FSJ1-50A
Description Type No.
Attenuation and Average Power

Frequency MHz 0.5 1 1.5 2 10 20 30 50 88 100 108 150 174 200 300 400 450 500 512 600 700 800 824 894 960 1000 1250 1500 1700 1800 2000 2100 2200 2300 3000 3400 4000 5000 6000 8000 10000 12000 14000 16000 18000 19000 20000 20400 Attenuation dB/100 ft 0.124 0.176 0.215 0.249 0.559 0.792 0.973 1.26 1.68 1.79 1.87 2.21 2.39 2.56 3.16 3.67 3.91 4.13 4.18 4.54 4.93 5.29 5.38 5.61 5.83 5.96 6.72 7.41 7.94 8.19 8.67 8.91 9.14 9.37 10.9 11.6 12.8 14.5 16.1 19.0 21.7 24.2 26.6 28.8 31.0 32.1 33.1 33.5 Attenuation dB/100 m 0.407 0.577 0.707 0.816 1.83 2.60 3.19 4.14 5.52 5.89 6.13 7.25 7.82 8.41 10.4 12.1 12.8 13.5 13.7 14.9 16.2 17.4 17.6 18.4 19.1 19.6 22.0 24.3 26.0 26.9 28.5 29.2 30.0 30.7 35.6 38.2 41.8 47.5 52.7 62.4 71.2 79.4 87.2 94.6 101.7 105.2 108.6 110.0 Average Power, kW 6.40 6.40 6.40 6.40 3.97 2.80 2.28 1.76 1.32 1.23 1.19 1.00 0.929 0.865 0.701 0.603 0.567 0.537 0.530 0.488 0.450 0.419 0.412 0.395 0.380 0.372 0.330 0.299 0.279 0.271 0.256 0.249 0.243 0.237 0.204 0.191 0.174 0.153 0.138 0.117 0.102 0.092 0.084 0.077 0.072 0.069 0.067 0.066
Cable Ordering Information

Standard Superflexible Cable 1/4" Standard Cable, Standard Jacket Fire Retardant Cables 1/4" Fire Retardant Jacket (CATVX) 1/4" Fire Retardant Jacket (CATVR) Low VSWR and Specialized Cables 1/4" Low VSWR, specify operating band Phase Stabilized and Phase Measured Cable Jumper Cable Assemblies See page 584
** Insert suffix number from Low VSWR Specifications table, page 476.
FSJ1-50A
FSJ1RN-50B FSJ1RN-50B
FSJ1P-50A-(**) See page 590
Characteristics
Electrical Impedance, ohms Maximum Frequency, GHz Velocity, percent Peak Power Rating, kW dc Resistance, ohms/1000 ft (1000 m) Inner Outer dc Breakdown, volts Jacket Spark, volts RMS Capacitance, pF/ft (m) Inductance, H/ft (m) Mechanical Outer Conductor Inner Conductor Diameter over Jacket, standard jacket, in (mm) Diameter over Jacket, fire-retardant jacket, in (mm) Diameter Copper Outer Conductor, in (mm) Diameter Inner Conductor, in (mm) Minimum Bending Radius, in (mm) Number of Bends, minimum (typical) Bending Moment, lb-ft (Nm) Cable Weight, lb/ft (kg/m) Tensile Strength, lb (kg) Flat Plate Crush Strength, lb/in (kg/mm) Copper Cu-Clad Al 0.29 (7.4) 0.29 (7.4) 0.25 (6.4) 0.075 (1.9) 1 (25) 15 (20) 0.8 (1.1) 0.045 (0.067) 150 (68) 100 (1.8) 50 1 20.4 84 6.4 3.0 (9.8) 2.0 (6.5) 1600 5000 24.2 (79.4) 0.061 (0.200)
Standard Conditons: For Attenuation. VSWR 1.0, ambient temperature 20C (68F). For Average Power. VSWR 1.0, ambient temperature 40C (104F), inner conductor temperature 100C (212F); no solar loading.
474
N Male F1PNMV2-H
N Male Right Angle F1PNR-HC
N Female Bulkhead F1PNF-BH
SMA Male F1PSM
SMA Male Right Angle F1PSR
SMA Female Bulkhead F1PSF
BNC Male F1PBM
TNC Male F1PTM-HF
UHF Male 41SP
Connectors
Interface N Male N Male N Male N Female N Female BNC Male UHF Male UHF Female SMA Male SMA Male SMA Female SMA Male TNC Male TNC Female TNC Male Mini-UHF Male 7-16 DIN Male 7-16 DIN Female 7-16 DIN Female 7-16 DIN Female Description Hex Head High Freq. Right Angle Hex Head Bulkhead Type Number F1PNMV2-H F1PNM-HF F1PNR-HC F1PNF F1PNF-BH F1PBM 41SP 41U F1PSM F1PSR F1PSF 41EWS F1PTM 41AENT F1PTM-HF F1MU F1PDM F1PDF F1PDF-PM F1PDF-BH Inner Contact Attachment Solder Solder Captivated Solder Solder Solder Solder Solder Solder Solder Solder Solder Solder Captivated Captivated Captivated Solder Solder Solder Solder Outer Contact Attachment Self-Clamping Tab Flare Self-Clamping Self-Clamping Self-Clamping Self-Clamping Solder Solder Self-Clamping Self-Clamping Self-Clamping Tab Flare Self-Clamping Tab Flare Tab Flare Crimp Self-Clamping Self-Clamping Self-Clamping Self Clamping Plating Code SG SG SG SG SG SS BB BS PG PG PG G SG NG NG NS SS SS SS SS Max. Length in (mm) 2.1 (53) 1.3 (33) 1.7/1.3 (43/33) 2.2 (55.2) 2.3 (58) 2.0 (50) 1.8 (46) 2.1 (53) 1.7 (43) 1.6/0.75 (41/19) 1.7 (43) 0.94 (23.9) 1.68 (43) 1.5 (38) 1.9 (48.8) 1.53 (39) 1.82 (46.3) 1.85 (47) 1.85 (47) 1.85 (47) Max. Dia. in (mm) 0.95 (24.1) 0.81 (20.5) 0.95 (24.1) 0.58 (14.8) 0.94 (23.9) 0.69 (17.5) 0.77 (19.6) 0.77 (19.6) 0.49 (12.5) 0.50 (12.7) 0.49 (12.5) 0.40 (10.2) 0.57 (14.5) 0.70 (17.8) 0.70 (17.8) 0.47 (11.9) 1.25 (31.75) 0.551 (14) 1.26 (32) 1.62 (41)
Up to 6 GHz Right Angle Up to 6 GHz, Bulkhead Up to 18 GHz 11 GHz and Below Bulkhead Hi Freq, Above 11 GHz
Panel Mount Bulkhead
* Stainless steel body Plating Codes: BB - Brass Body and Pin, BS - Brass Body and Silver Plated Pin, NG - Nickel Plated Body and Gold Plated Pin, NS- Nickel Plated Body and Silver Plated Pin, PG - Passivated Body and Gold Plated Pin+A135, SG - Silver Plated Body and Gold Plated Pin, SS - Silver Plated Body and Pin, G - Stainless Steel Body and Gold Plated Pin.
Connector Accessories See page 624 Factory Attached Connectors For factory made cable assemblies and jumper cables, see pages 584-587.
U.K. 0800-250055 Australia 1800-803 219 New Zealand 0800-441-747 Revised 12/00 & 5/01
475
Low VSWR Specifications, Type FSJ1P-50A-( )

Frequency Band, GHz 0.01- 2.3* Type No. FSJ1P-50A-1A Using Connector Type No.** N Male N Male N Female Right Angle N Male SMA Male Right Angle SMA Male SMA Female TNC Male 7-16 DIN Male 7-16 DIN Female N Male N Female Right Angle N Male SMA Male Right Angle SMA Male SMA Female TNC Male 7-16 DIN Male 7-16 DIN Female N Male SMA Male SMA Female TNC Male N Male SMA Male SMA Female N 7-16 DIN N 7-16 DIN N 7-16 DIN to 10 ft (3 m) 1.07 (29.4) 1.12 (24.9) 1.15 (23.1) 1.31 (17.4) 1.12 (24.9) 1.30 (17.7) 1.12 (24.9) 1.15 (23.1) 1.12 (24.9) 1.17 (22.1) 1.15 (23.1) 1.40 (15.6) 1.38 (16.0) 1.17 (22.1) 1.40 (15.6) 1.17 (22.1) 1.30 (17.7) 1.25 (19.1) 1.25 (19.1) 1.40 (15.6) 1.35 (16.5) 1.40 (15.6) 1.45 (14.7) 1.55 (13.3) 1.50 (14.0) 1.50 (14.0) 1.08 (28.3) 1.08 (28.3) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) Assembly VSWR, Maximum (R.L., dB) 10-20 ft (3-6 m) 20-200 ft (6-60 m) 1.13 (24.3) 1.27 (18.5) 1.15 (23.1) 1.35 (16.5) 1.20 (20.8) 1.40 (15.6) 1.35 (16.5) 1.40 (15.6) 1.25 (19.1) 1.35 (16.5) 1.30 (17.7) 1.40 (15.6) 1.25 (19.1) 1.35 (16.5) 1.20 (20.8) 1.40 (15.6) 1.18 (21.6) 1.40 (15.6) 1.22 (20.1) 1.40 (15.6) 1.18 (21.6) 1.31 (17.4) 1.45 (14.7) 1.50 (14.0) 1.40 (15.6) 1.50 (14.0) 1.40 (15.6) 1.45 (14.7) 1.45 (14.7) 1.50 (14.0) 1.40 (15.6) 1.45 (14.7) 1.35 (16.5) 1.45 (14.7) 1.30 (17.7) 1.45 (14.7) 1.30 (17.7) 1.45 (14.7) 1.45 (14.7) 1.50 (14.0) 1.40 (15.6) 1.45 (14.7) 1.45 (14.7) 1.50 (14.0) 1.50 (14.0) 1.63 (12.4) 1.55 (13.3) 1.63 (12.4) 1.55 (13.3) 1.55 (13.3) 1.55 (13.3) 1.55 (13.3) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4)
0.01- 4.2*
FSJ1P-50A-2A
0.01-10.2*
FSJ1P-50A-3A
0.01-18.0*
FSJ1P-50A-4A
0.806-0.960 0.806-0.960 and 1.7- 2.2 1.7- 2.2
FSJ1P-50A-40 FSJ1P-50A-42 FSJ1P-50A-41
* Specify frequency band. ** Connectors ordered separately. VSWR values apply to straight connectors only (except where noted otherwise), are guaranteed for factory fit assemblies, and are typical for field cut lengths. If two different connector interfaces are selected, the higher VSWR value is guaranteed. High frequency version.
Accessories
Description Type No. Description Type No.
Hangers For more hangers, adapters and mounting hardware

see pages 599-607 Insulated Hanger, single. Recommended maximum spacing is 2.5 ft (0.76 m). For different spacing recommendations, refer to Cable Hanger Spacing, page 593-598 11662-3 Angle Adapter, for insulated hanger 40430-1 Nylon Cable Tie Kit of 50, Indoor use, Recommended maximum spacing is 1.5 ft (0.5 m) 40417 Nylon Cable Tie Kit in plastic box. 100 each 4, 5.5 and 7.5 inch ties. Indoor use, Recommended maximum spacing is 1.5 ft (0.5 m) CT-K350 Velcro Cable Ties, Black, 8 inch. Indoor Use Kit of 10 VCT8-10 Kit of 50 VCT8-50 Kit of 100 VCT8-100 Support/Hoisting Grip. Use at 200-ft (60m) intervals. Grip with one clamp F1SGRIP Support clamp kit of 10 F1SGRIP-1IK
Weatherproofing for additional weatherproofing information

see pages 617-618 Cold Shrink Weatherproofing Kit 5/8" Coax to 1/4" Coax 7/8" Coax to 1/4" Coax 1-1/4" or 1-5/8" Coax to 1/4" Coax 1/4" to 1-1/2" Omni/Panel base Type N or DIN 1/4" to 2" Omni/Panel base Type N or DIN Connector/Splice Weatherproofing Kit
241475-13 241475-12 241475-11 241548-10 241548-11 221213
Entry Systems For entry systems offerings see pages 619-620

Standard Cable Entry Boots 4" Boots Three Hole: 204679A-17
Tools for additional tool offerings see pages 620-623

EASIAX Cutting Tool FSJ1/FSJ4 DIN Connector Coupling Torque Wrench N Connector Coupling Torque Wrench 207865 244377 244379
Grounding and Surge Protection for additional grounding

kits and our surge protection offerings, see pages 609-616 Standard Grounding Kit Factory attached one-hole lug, 24" lead 223158 Factory attached two-hole lug, 24" lead 223158-2 Field attached one-hole lug, 36" lead 223158-3
Cold Shrink is a trademark of Minnesota Mining and Manufacturing Co.
476
Revised 9/00 & 3/01
1/4" Superflexible High Power, High Temperature, Plenum, Fluoropolymer Foam Dielectric, ETS Series 50-ohm
Attenuation and Average Power Ratings

Frequency MHz Attenuation dB/100 ft 0.124 0.176 0.216 0.249 0.56 0.79 0.97 1.26 1.67 1.79 1.86 2.20 2.37 2.54 3.13 3.63 3.86 4.08 4.13 4.48 4.86 5.21 5.29 5.52 5.73 5.86 6.59 7.25 7.75 7.99 8.46 8.68 8.90 9.12 10.5 11.3 12.3 13.9 15.4 18.1 20.6 22.9 25.0 27.0 29.0 29.9 30.9 Attenuation dB/100 m 0.408 0.577 0.707 0.817 1.83 2.60 3.19 4.12 5.49 5.86 6.09 7.21 7.77 8.35 10.3 11.9 12.7 13.4 13.5 14.7 15.9 17.1 17.4 18.1 18.8 19.2 21.6 23.8 25.4 26.2 27.7 28.5 29.2 29.9 34.5 37.0 40.4 45.7 50.6 59.5 67.5 75.0 82.0 88.7 95.1 98.2 101.3 ETS1-50T1 ETS1-502 Avg. Power Avg. Power kW kW 6.40 6.40 6.40 6.40 6.40 6.40 5.48 4.23 3.18 2.98 2.86 2.42 2.25 2.09 1.70 1.46 1.38 1.30 1.29 1.19 1.10 1.02 1.01 0.964 0.928 0.909 0.808 0.733 0.686 0.666 0.629 0.613 0.598 0.584 0.506 0.472 0.432 0.382 0.345 0.294 0.259 0.233 0.213 0.197 0.184 0.178 0.173 6.40 6.40 6.40 6.40 6.40 6.40 6.13 4.73 3.55 3.33 3.20 2.71 2.51 2.34 1.90 1.64 1.54 1.46 1.44 1.33 1.22 1.14 1.12 1.08 1.04 1.02 0.904 0.82 0.768 0.745 0.704 0.686 0.669 0.653 0.566 0.529 0.484 0.428 0.386 0.329 0.289 0.261 0.238 0.220 0.206 0.199 0.193
ETS1-50T

High Power, Plenum Cables 1/4" Fire Retardant Jacket (CATVP, UL910) 1/4" Unjacketed, Fire Retardant (CATVP, UL910) Jumper Cable Assemblies See page 584 ETS1-50T ETS1-50
Characteristics
Electrical Impedance, ohms Maximum Frequency, GHz Velocity, percent Peak Power Rating, kW dc Resistance, ohms/1000 ft (1000 m) Inner Outer dc Breakdown, volts Jacket Spark, volts RMS Capacitance, pF/ft (pf/m) Inductance, H/ft (H/m) Mechanical Outer Conductor Copper Inner Conductor Silver plated copper Diameter over Jacket, in (mm) 0.29 (7.4) Diameter over Copper Outer Conductor, in (mm) 0.25 (6.4) Minimum Bending Radius, in (mm) 1 (25) Number of Bends, minimum (typical) 15 (20) Bending Moment, lb-ft (Nm) 0.6 (0.8) Cable Weight, lb/ft (kg/m) 0.066 (0.098) Tensile Strength, lb (kg) 150 (68) Flat Plate Crush Strength, lb/in (kg/mm) 100 (1.8) 50 2 20.0 82 6.4 1.9 (6.2) 2.0 (6.5) 1600 4000 24.6 (80.6) 0.063 (0.205)
0.5 1 1.5 2 10 20 30 50 88 100 108 150 174 200 300 400 450 500 512 600 700 800 824 894 960 1000 1250 1500 1700 1800 2000 2100 2200 2300 3000 3400 4000 5000 6000 8000 10000 12000 14000 16000 18000 19000 20000
Standard Conditions: For Attenuation: VSWR 1.0, ambient temperature 20C (68F). 1. For Average Power, Type ETS1-50T (jacketed): VSWR 1.0 ambient temperature 40C (104F), inner conductor temperature 200C (392F). 2. For Average Power, Type ETS1-50 (unjacketed): VSWR 1.0 ambient temperature 40C (104F), inner conductor temperature 250C (482F); no solar loading.
477
N Male F1PNMV2-H
SMA Male F1PSM
BNC Male F1PBM
TNC Male F1PTM-HF
UHF Male 41SP
Connectors
Interface N Male N Male N Male N Female N Female BNC Male UHF Male UHF Female SMA Male SMA Male SMA Female SMA Male SMA Female TNC Male TNC Female TNC Male Mini-UHF Male 7-16 DIN Male 7-16 DIN Female 7-16 DIN Female 7-16 DIN Female Description Hex Head High Freq. Hex Head Right Angle Bulkhead Type Number F1PNMV2-H F1PNM-HF F1PNR-HC F1PNF F1PNF-BH F1PBM 41SP 41U F1PSM F1PSR F1PSF 41EWS 41ENS F1PTM 41AENT F1PTM-HF F1MU F1PDM F1PDF F1PDF-PM F1PDF-BH Inner Contact Attachment Solder Solder Captivated Solder Solder Solder Solder Solder Solder Solder Solder Solder Solder Solder Captivated Captivated Captivated Solder Solder Solder Solder Outer Contact Attachment Self-Clamping Tab Flare Self-Clamping Self-Flare Self-Clamping Self-Clamping Solder Solder Self-Clamping Self-Clamping Self-Clamping Tab Flare Tab Flare Self-Clamping Tab Flare Tab Flare Crimp Self-Clamping Self-Clamping Self-Clamping Self Clamping Plating Code SG SG SG SG SG SS BB BS PG PG PG G G SG NG NG NS SS SS SS SS Max. Length in (mm) 2.1 (53) 1.3 (33) 1.7/1.3 (43/33) 2.2 (55.2) 2.3 (58) 2.0 (50) 1.8 (46) 2.1 (53) 1.7 (43) 1.6/0.75 (41/19) 1.7 (43) 0.94 (23.9) 1.00 (25.4) 1.68 (43) 1.5 (38) 1.9 (48.8) 1.53 (39) 1.82 (46.3) 1.85 (47) 1.85 (47) 1.85 (47) Max. Dia. in (mm) 0.95 (24.1) 0.81 (20.5) 0.95 (24.1) 0.58 (14.8) 0.94 (23.9) 0.69 (17.5) 0.77 (19.6) 0.77 (19.6) 0.49 (12.5) 0.50 (12.7) 0.49 (12.5) 0.40 (10.2) 0.40 (10.2) 0.57 (14.5) 0.70 (17.8) 0.70 (17.8) 0.47 (11.9) 1.25 (31.75) 0.551 (14) 1.26 (32) 1.62 (41)
Up to 6 GHz Right Angle Up to 6 GHz, Bulkhead Up to 18 GHz Up to 18 GHz 11 GHz and Below Bulkhead Hi Freq, Above 11 GHz
Panel Mount Bulkhead
Connector Accessories See page 624. Factory Attached Connectors For factory made cable assemblies and jumper cables, see pages 584-587.
478
Revised 7/00
Accessories
Hangers For more hangers, adapters and mounting hardware see

pages 599-607 Insulated Hanger, single. Recommended maximum spacing is 2.5 ft (0.76 m). For different spacing recommendations, refer to Cable Hanger Spacing, page 593-598 11662-3 Angle Adapter, for insulated hanger Nylon Cable Tie Kit of 50, Indoor use, Recommended maximum spacing is 1.5 ft (0.5 m) Nylon Cable Tie Kit in plastic box. 100 each 4, 5.5 and 7.5 inch ties. Indoor use, Recommended maximum spacing is 1.5 ft (0.5 m) Velcro Cable Ties, Black, 8 inch. Indoor Use Kit of 10 Kit of 50 Kit of 100 VCT8-10 VCT8-50 VCT8-100 40430-1 40417

see pages 617-618 Cold Shrink Weatherproofing Kit 5/8" Coax to 1/4" Coax 7/8" Coax to 1/4" Coax 1-1/4" or 1-5/8" Coax to 1/4" Coax 1/4" to 1-1/2" Omni/Panel base Type N or DIN 1/4" to 2" Omni/Panel base Type N or DIN Connector/Splice Weatherproofing Kit 241475-13 241475-12 241475-11 241548-10 241548-11 221213
CT-K350



kits and our surge protection offerings, see pages 609-616 Standard Grounding Kit Factory attached one-hole lug, 24" lead Factory attached two-hole lug, 24" lead Field attached one-hole lug, 36" lead 223158 223158-2 223158-3
479
FSJ2-50
Description Type No. Frequency MHz 0.5 1 1.5 2 10 20 30 50 88 100 108 150 174 200 300 400 450 500 512 600 700 800 824 894 960 1000 1250 1500 1700 1800 2000 2100 2200 2300 3000 3400 4000 5000 6000 8000 10000 12000 13400 Attenuation dB/100 ft 0.082 0.117 0.143 0.165 0.372 0.528 0.649 0.842 1.13 1.20 1.25 1.48 1.60 1.72 2.13 2.48 2.64 2.79 2.83 3.08 3.35 3.60 3.66 3.82 3.97 4.06 4.59 5.08 5.45 5.63 5.97 6.14 6.30 6.47 7.53 8.09 8.90 10.2 11.3 13.5 15.5 17.4 18.6 Attenuation dB/100 m 0.270 0.383 0.469 0.542 1.22 1.73 2.13 2.76 3.69 3.94 4.10 4.86 5.25 5.65 6.99 8.14 8.66 9.17 9.28 10.1 11.0 11.8 12.0 12.5 13.0 13.3 15.1 16.7 17.9 18.5 19.6 20.1 20.7 21.2 24.7 26.6 29.2 33.3 37.2 44.3 50.8 57.0 61.1 Average Power, kW 13.2 13.2 13.2 13.2 6.92 4.87 3.97 3.06 2.29 2.14 2.06 1.74 1.61 1.49 1.21 1.04 0.975 0.921 0.910 0.836 0.769 0.715 0.704 0.673 0.648 0.634 0.580 0.507 0.472 0.457 0.431 0.419 0.409 0.398 0.342 0.318 0.289 0.254 0.228 0.191 0.166 0.148 0.138

** Insert suffix number from Low VSWR Specifications table, page 481
FSJ2-50
FSJ2RN-50 FSJ2RN-50
FSJ2P-50-(**) See page 590
Characteristics
Electrical Impedance, ohms Maximum Frequency, GHz Velocity, percent Peak Power Rating, kW dc Resistance, ohms/1000 ft (1000 m) Inner Outer dc Breakdown, volts Jacket Spark, volts RMS Capacitance, pF/ft (m) Inductance, H/ft (m) Mechanical Outer Conductor Copper Inner Conductor Copper-Clad Aluminum Diameter over Jacket, standard jacket, in (mm) 0.415 (10.5) Diameter over Jacket, fire-retardant jacket, in (mm) 0.425 (10.8) Diameter over Copper Outer Conductor, in (mm) 0.375 (9.5) Diameter Inner Conductor, in (mm) 0.110 (2.8) Minimum Bending Radius, in (mm) 1 (25) Number of Bends, minimum (typical) 20 (50) Bending Moment, lb-ft (Nm) 1.7 (2.3) Cable Weight, lb/ft. (kg/m) 0.078 (0.12) Tensile Strength, lb (kg) 210 (95) Flat Plate Crush Strength, lb/in (kg/mm) 100 (1.8) 50 1 13.4 83 13.2 1.29 (4.23) 1.52 (4.99) 2300 5000 24.3 (79.7) 0.061 (0.200)
Standard Conditions: For attenuation. VSWR 1.0, ambient temperature 20C (68F). For Average Power, VSWR 1.0, ambient temperature 40C (104F), inner conductor temperature 100C (212F), no solar loading.
480
N Male F2PNM-H
7-16 DIN Female F2PDF
7-16 DIN Male F2PDM-C
N Female F2PNF
7-16 DIN Male Right Angle F2PDR-C
Connectors
Interface N Male N Male N Female N Female N Female 7-16 DIN Male 7-16 DIN Male 7-16 DIN Female 7-16 DIN Female 7-16 DIN Female 7-16 DIN Male Description Hex Head Hex Head Type Number F2PNM-H F2PNM-HC F2PNF F2PNF-C F2PNF-BH F2PDM F2PDM-C F2PDF F2PDF-C F2PDF-PM F2PDR-C Inner Contact Attachment Solder Captivated Solder Captivated Solder Solder Captivated Solder Captivated Solder Captivated Outer Contact Attachment Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Plating Code SG SG SG SG SG SS SS SS SS SS SS Max. Length in (mm) 1.9 (48) 1.9 (48) 2.1 (53) 2.1 (53) 2.1 (53) 2.2 (57) 2.1 (53) 2.2 (56) 2.1 (51.6) 2.2 (56) 1.7/1.3 (43/34) Max. Dia. in (mm) 0.94 (23) 0.94 (23) 0.67 (17) 0.64 (16) 0.95 (24) 1.4 (36) 1.4 (36) 1.1 (28) 0.79 (20) 1.1 (28) 1.4 (36)
Bulkhead
Panel Mount Right Angle
Plating Codes: SG - Silver Plated Body and Gold Plated Pin, SS - Silver Plated Body and Pin, BS - Brass Body and Silver Plated Pin.
Low VSWR Specifications, Type FSJ2P-50-( )

Frequency Band, GHz 0.806-0.960 0.806-0.960 and 1.7- 2.2 1.7- 2.2 Up to 2.3 * Up to 5.0 * Up to 8.5 * Up to 13.4 * Type No. FSJ2P-50-40 FSJ2P-50-42 FSJ2P-50-41 FSJ2P-50-1 FSJ2P-50-2 FSJ2P-50-3 FSJ2P-50-4 Using Connector Type** N 7-16 DIN N 7-16 DIN N 7-16 DIN N Male N Male N Male N Male Assembly VSWR, Maximum (R.L., dB) to 10 ft 10-20 ft (3 m) (3-6 m) 1.08 (28.3) 1.10 (26.4) 1.08 (28.3) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.15 (23.1) 1.20 (20.8) 1.20 (20.8) 1.40 (15.6) 1.40 (15.6) 1.50 (14.0) 1.50 (14.0) 20-200 ft (6-60 m) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.20 (20.8) 1.25 (19.1) 1.40 (15.6) 1.50 (14.0)
* Specify operating band. ** Connectors ordered separately. VSWR values apply to straight connectors only, are guaranteed for factory fit assemblies, and are typical for field cut lengths. If two different connector interfaces are selected, the higher VSWR value is guaranteed.
481
Accessories

see pages 599-607 Insulated Hanger, single. Recommended maximum spacing is 2.5 ft (0.76 m). For different spacing recommendations, refer to Cable Hanger Spacing, page 593-598 11662-3 Angle Adapter, for insulated hanger Nylon Cable Tie Kit of 50, Indoor use, Recommended maximum spacing is 1.5 ft (0.5 m) Nylon Cable Tie Kit in plastic box. 100 each 4, 5.5 and 7.5 inch ties. Indoor use, Recommended maximum spacing is 1.5 ft (0.5 m) Velcro Cable Ties, Black, 8 inch. Indoor Use Kit of 10 Kit of 50 Kit of 100 Support/Hoisting Grip. Use at 200-ft (60m) intervals. Grip with one clamp Support clamp kit of 10 F2SGRIP F2SGRIP-2IK VCT8-10 VCT8-50 VCT8-100 40430-1 40417

see pages 617-618 Cold Shrink Weatherproofing Kit 3/8" Coax to 3/8" Coax with N Connector 5/8" Coax to 3/8" Coax 7/8" Coax to 3/8" Coax 1-1/4" or 1-5/8" Coax to 3/8" Coax 2-1/4" Coax to 3/8" Coax 3/8" Coax to 1-1/2" Omni Panel Base type N or DIN 3/8" to 2" Omni Panel Base type N or DIN Connector/Splice Weatherproofing Kit 241475-10 241475-13 241475-9 241475-5A 241475-8 241548-8 241548-9 221213
CT-K350

Standard Cable Entry Boots 4" Boots Three Hole: 5" Boots One Hole: 204679A-19 48939A-16


482
3/8" Superflexible High Power, High Temperature, Expanded PTFE Foam Dielectric, ETS Series 50-ohm
ETS2-50T
Frequency MHz 0.5 1 1.5 2 10 20 30 50 88 100 108 150 174 200 300 400 450 500 512 600 700 800 824 894 960 1000 1250 1500 1700 1800 2000 2100 2200 2300 3000 3400 4000 5000 6000 8000 10000 12000 13400
Attenuation dB/100 ft 0.083 0.117 0.143 0.166 0.373 0.531 0.653 0.849 1.14 1.22 1.27 1.51 1.63 1.75 2.18 2.54 2.71 2.87 2.91 3.17 3.45 3.72 3.78 3.96 4.12 4.22 4.78 5.31 5.71 5.90 6.28 6.46 6.64 6.81 7.98 8.61 9.50 10.9 12.2 14.7 17.0 19.2 20.7
Attenuation dB/100 m 0.271 0.383 0.470 0.543 1.22 1.74 2.14 2.79 3.73 3.99 4.16 4.94 5.34 5.75 7.14 8.34 8.89 9.41 9.54 10.4 11.3 12.2 12.4 13.0 13.5 13.8 15.7 17.4 18.7 19.4 20.6 21.2 21.8 22.4 26.2 28.2 31.2 35.8 40.1 48.2 55.8 62.9 67.8
ETS2-50T1 ETS2-502 Avg. Power Avg. Power kW kW 13.2 13.2 13.2 13.2 13.2 12.2 9.89 7.61 5.68 5.31 5.10 4.29 3.97 3.69 2.97 2.54 2.39 2.25 2.22 2.04 1.87 1.74 1.71 1.63 1.57 1.53 1.35 1.22 1.13 1.10 1.03 1.00 0.975 0.950 0.811 0.752 0.681 0.593 0.529 0.441 0.381 0.338 0.314 13.2 13.2 13.2 13.2 13.2 13.2 11.3 8.67 6.47 6.05 5.82 4.89 4.52 4.20 3.39 2.90 2.72 2.57 2.53 2.32 2.13 1.98 1.95 1.86 1.79 1.75 1.54 1.39 1.29 1.25 1.17 1.14 1.11 1.08 0.924 0.847 0.776 0.676 0.603 0.502 0.434 0.385 0.358

High Power, Plenum Cables 3/8" Fire Retardant Jacket (CATVP) 3/8" Unjacketed, Fire Retardant (CATVP) ETS2-50T ETS2-50
Characteristics
Electrical Impedance, ohms Maximum Frequency, GHz Velocity, percent Peak Power Rating, kW dc Resistance, ohms/1000 ft (1000 m) Inner Outer dc Breakdown, volts Jacket Spark, volts RMS Capacitance, pF/ft (m) Inductance, H/ft (m) Mechanical Outer Conductor Copper Inner Conductor Silver Plated, Copper-Clad Aluminum Diameter over Jacket, in (mm) 0.415 (10.5) Diameter over Copper Outer Conductor, in (mm) 0.375 (9.5) Minimum Bending Radius, in (mm) 1 (25) Number of Bends, minimum (typical) 20 (50) Bending Moment, lb-ft (Nm) 1.7 (2.3) Cable Weight, lb/ft. (kg/m) 0.087 (0.13) Tensile Strength, lb (kg) 210 (95) Flat Plate Crush Strength, lb/in (kg/mm) 100 (1.8) 50 2 13.4 83 13.2 1.29 (4.23) 1.52 (4.99) 2300 4000 24.3 (79.7) 0.061 (0.200)
Standard Conditions: For Attenuation: VSWR 1.0, ambient temperature 20C (68F). 1. For Average Power, Type ETS2-50T (jacketed): VSWR 1.0 ambient temperature 40C (104F), inner conductor temperature 200C (392F). 2. For Average Power, Type ETS2-50 (unjacketed): VSWR 1.0 ambient temperature 40C (104F), inner conductor temperature 250C (482F); no solar loading.
483
N Male F2PNM-H
N Female F2PNF
Connectors
Bulkhead
Panel Mt. Right Angle
Accessories

see pages 599-607 Insulated Hanger, single. Recommended maximum spacing is 2.5 ft (0.76 m). For different spacing recommendations, refer to Cable Hanger Spacing, page 593-598 11662-3 Angle Adapter, for insulated hanger Nylon Cable Tie Kit of 50, Indoor use, Recommended maximum spacing is 1.5 ft (0.5 m) Nylon Cable Tie Kit in plastic box. 100 each 4, 5.5 and 7.5 inch ties. Indoor use, Recommended maximum spacing is 1.5 ft (0.5 m) Velcro Cable Ties, Black, 8 inch. Indoor Use Kit of 10 Kit of 50 Kit of 100 VCT8-10 VCT8-50 VCT8-100 40430-1 40417

see pages 617-618 Connector/Splice Weatherproofing Kit 221213

CT-K350


484
FSJ4-50B
Description Type No. Frequency MHz 0.5 1 1.5 2 10 20 30 50 88 100 108 150 174 200 300 400 450 500 512 600 700 800 824 894 960 1000 1250 1500 1700 1800 2000 2100 2200 2300 3000 3400 4000 5000 6000 8000 10000 10200 Attenuation dB/100 ft 0.070 0.100 0.122 0.141 0.318 0.453 0.557 0.724 0.971 1.04 1.08 1.28 1.39 1.50 1.86 2.17 2.31 2.45 2.48 2.71 2.95 3.18 3.23 3.38 3.52 3.60 4.09 4.54 4.88 5.05 5.37 5.53 5.68 5.83 6.84 7.38 8.15 9.35 10.5 12.6 14.6 14.8 Attenuation dB/100 m 0.231 0.327 0.401 0.463 1.04 1.49 1.83 2.38 3.19 3.41 3.55 4.21 4.56 4.91 6.09 7.12 7.59 8.04 8.15 8.89 9.68 10.4 10.6 11.1 11.6 11.8 13.4 14.9 16.0 16.6 17.6 18.1 18.6 19.1 22.4 24.2 26.7 30.7 34.4 41.4 47.9 48.5 Average Power, kW 15.6 15.6 15.6 15.6 10.1 7.07 5.75 4.42 3.30 3.08 2.96 2.49 2.30 2.14 1.72 1.48 1.38 1.31 1.29 1.18 1.09 1.01 0.991 0.947 0.909 0.889 0.783 0.705 0.656 0.634 0.597 0.580 0.564 0.549 0.469 0.435 0.394 0.343 0.306 0.254 0.220 0.217

FSJ4-50B
FSJ4RN-50B FSJ4RN-50B
FSJ4P-50-(**) See page 590
Characteristics
Electrical Impedance, ohms Maximum Frequency, GHz Velocity, percent Peak Power Rating, kW dc Resistance, ohms/1000 ft (1000 m) Inner Outer dc Breakdown, volts Jacket Spark, volts RMS Capacitance, pF/ft (m) Inductance, H/ft (m) Mechanical Outer Conductor Copper Inner Conductor Copper-Clad Aluminum Diameter over Jacket, standard jacket, in (mm) 0.52 (13.2) Diameter over Jacket, fire-retardant jacket, in (mm) 0.53 (13.5) Diameter over Copper Outer Conductor, in (mm) 0.48 (12.2) Diameter Inner Conductor, in (mm) 0.142 (3.6) Minimum Bending Radius, in (mm) 1.25 (32) Number of Bends, minimum (typical) 20 (50) Bending Moment, lb-ft (Nm) 2.0 (2.7) Cable Weight, lb/ft. (kg/m) 0.14 (0.21) Tensile Strength, lb (kg) 175 (80) Flat Plate Crush Strength, lb/in (kg/mm) 110 (1.9) 50 1 10.2 81 15.6 0.82 (2.69) 1.00 (3.28) 2500 5000 25.2 (82.7) 0.0625 (0.205)
485
N Male F4PNMV2-H
UHF Male 44ASP
N Male Right Angle F4PNR-H
7/8" EIA 44ASR
7-16 DIN Female F4PDF-C
7-16 DIN Male F4PDMV2-C
Connectors
Interface N Male N Male N Male N Male N Female N Female N Female 4.1/9.5 DIN Male 4.1/9.5 DIN Male 7-16 DIN Male 7-16 DIN Male 7-16 DIN Male 7-16 DIN Male 7-16 DIN Female 7-16 DIN Female 7-16 DIN Female 7-16 DIN Female 7-16 DIN Female 7-16 DIN Female 7/8" EIA Flange UHF Male UHF Female HN Male SC Male Description Hex Head Hex Head Rt Angle, Hex Hd Bulkhead Rt Angle, Outdoor Use Right Angle Right Angle Bulkhead Panel Mount Bulkhead Panel Mount Type Number F4PNMV2-H F4PNMV2-HC F4PNR-H F4PNR-HC F4PNF F4PNF-C F4PNF-BH F4PKM-C F4PKR-C F4PDMV2-C F4PDMV2 F4PDR F4PDR-C F4PDF-C F4PDF F4PDF-BH F4PDF-PM F4PDF-BHC F4PDF-PMC 44ASR 44ASP 44ASU 44ASJ 44SPCW Inner Contact Attachment Solder Captivated Solder Captivated Solder Captivated Solder Captivated Captivated Captivated Solder Solder Captivated Captivated Solder Solder Solder Captivated Captivated Solder Solder Solder Solder Solder Outer Contact Attachment Crush-Flare Crush-Flare Tab-Flare Crush-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Crush Flare Crush Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Tab-Flare Tab-Flare Tab-Flare Tab-Flare Tab-Flare Plating Code SG SG SG SG SG SG SG SS SS SS SS SS SS SS SS SS SS SS SS BS BS BS BB SG Max. Length in (mm) 2.13 (54.0) 2.13 (54.0) 3.3/1.5 (84/38) 2.8 (71.9)/1.6 (41.5) 2.3 (53.3) 2.3 (53.3) 2.3 (58) 2.0 (50) 2.3/1.5 (57/38) 1.98 (50.2) 2.10 (53.4) 2.4.1.8 (61/46) 2.1/2.0 (53/50) 2.0 (50) 2.0 (50) 2.01 (51.1) 2.01 (51.1) 2.0 (50) 2.0 (50) 3.3 (84) 2.1 (53) 2.3 (58) 2.4 (61) 2.7 (69) Max. Dia. in (mm) 0.94 (23.8) 0.94 (23.8) 0.86 (21.8) 1 (25.7) 0.88 (22.4) 0.88 (22.4) 0.95 (24.1) 0.95 (24.1) 0.95 (24.1) 1.05 (26.7) 1.05 (26.7) 1.4 (35.6) 1.4 (35.6) 1.1 (27.9) 1.1 (27.9) 1.50 (38) 1.26 (32) 1.8 (45.7) 1.3 (33) 1.4 (35.6) 0.84 (21.3) 0.84 (21.3) 0.84 (21.3) 0.88 (22.4)
Plating Codes: BB - Brass Body and Pin, BS - Brass Body and Silver Plated Pin, SG - Silver Plated Body and Gold Plated Pin, SS - Silver Plated Body and Pin
486
Revised 7/00 & 3/01
Low VSWR Specifications, Type FSJ4P-50B-( )

Frequency Band, GHz 0.01-2.3* Type No. FSJ4P-50B-1 Using Connector Type** N Male N Female 7-16 DIN Male 7-16 DIN Female Rt. Angle N Male N Male N Female 7-16 DIN Male 7-16 DIN Female Rt. Angle N Male N Male N Female 7-16 DIN Male 7-16 DIN Female N 7-16 DIN N 7-16 DIN N 7-16 DIN N Male N Female 7-16 DIN Male 7-16 DIN Female Rt. Angle N Male N Male N Female 7-16 DIN Male 7-16 DIN Female Rt. Angle N Male N Male N Female 7-16 DIN Male 7-16 DIN Female 0-10 ft (0-3 m) 1.10 (26.4) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.20 (20.8) 1.25 (19.1) 1.25 (19.1) 1.25 (19.1) 1.35 (16.5) 1.35 (16.5) 1.35 (16.5) 1.35 (16.5) 1.35 (16.5) 1.08 (28.3) 1.08 (28.3) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.20 (20.8) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.20 (20.8) 1.35 (16.5) 1.50 (14.0) 1.50 (14.0) 1.50 (14.0) Assembly VSWR, Maximum (R.L., dB) 10-20 ft 20-100 ft Above 100 ft (3-6 m) (6-30 m) (Above 30 m) 1.10 (26.4) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.18 (21.6) 1.20 (20.8) 1.25 (19.1) 1.25 (19.1) 1.25 (19.1) 1.35 (16.5) 1.35 (16.5) 1.35 (16.5) 1.35 (16.5) 1.35 (16.5) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.20 (20.8) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.20 (20.8) 1.35 (16.5) 1.50 (14.0) 1.50 (14.0) 1.50 (14.0) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.30 (17.7) 1.20 (20.8) 1.25 (19.1) 1.25 (19.1) 1.25 (19.1) 1.35 (16.5) 1.35 (16.5) 1.40 (15.6) 1.40 (15.6) 1.40 (15.6) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.30 (17.7) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.20 (20.8) 1.35 (16.5) 1.50 (14.0) 1.50 (14.0) 1.50 (14.0) 1.15 (23.1) 1.20 (20.8) 1.20 (20.8) 1.20 (20.8) 1.50 (14.0) 1.20 (20.8) 1.30 (17.7) 1.30 (17.7) 1.30 (17.7) 1.50 (14.0) 1.35 (16.5) 1.50 (14.0) 1.50 (14.0) 1.50 (14.0) 1.20 (20.8) 1.20 (20.8) 1.20 (20.8) 1.20 (20.8) 1.40 (15.6) 1.20 (20.8) 1.20 (20.8) 1.20 (20.8) 1.20 (20.8) 1.20 (20.8) 1.40 (15.6) 1.40 (15.6) 1.40 (15.6) 1.40 (15.6)
0.01-4.2*
FSJ4P-50B-2
0.01-7.1*
FSJ4P-50B-3
0.806-0.960 0.806-0.960 and 1.7- 2.2 1.7- 2.2 0.3-1.7*
FSJ4P-50B-40 FSJ4P-50B-42 FSJ4P-50B-41 FSJ4P-50B-6
1.7-2.7
FSJ4P-50B-7
4.0-8.0*
FSJ4P-50B-8
* Specify operating band. ** Connectors ordered separately. VSWR values apply to straight connectors only (except where noted otherwise), are guaranteed for factory fit assemblies and are typical for field cut lengths. If two different connector interfaces are selected, the higher VSWR value is guaranteed.
487
Accessories

see pages 599-607 Standard Hangers Kit of 10. Recommended maximum spacing is 3-ft (1 m). For different spacing recommendations, refer to Cable Hanger Spacing, page 593-598 43211A Snap-in Hangers Kit of 10. For prepunched 3/4" (19mm) holes on tower member or adapters, Recommended maximum spacing is 3-ft (1 m). For different spacing recommendations, refer to Cable Hanger Spacing, page 593-598 206706A-1 Support/Hoisting Grip. Use at 200-ft (60m) intervals. Grip with one clamp Support clamp kit of 10 Standard Hoisting Grip F4SGRIP F4SGRIP-4IK 43094
Weatherproofing for additional weatherproofing information see

pages 617-618 WeatherShield Connector Protection Housing LDF5 to FSJ4 LDF6 to FSJ4 LDF7 to FSJ4 Cold Shrink Weatherproofing Kit 1/2" Coax N Connector to 1/2" Coax N Connector 5/8" Coax to 1/2" Coax 7/8" Coax to 1/2" Coax 1-1/4" or 1-5/8" Coax to 1/2" Coax 2-1/4" Coax to 1/2" Coax 1/2" to 1-1/2" Omni/Panel base Type N or DIN Connector/Splice Weatherproofing Kit 241474-4 241475-13 241475-9 241475-5A 241475-8 241548-8 221213 WS-L5F4 WS-L6F4 WS-L7F4

kits and our surge protection offerings, see pages 609-616 Standard Grounding Kits Factory attached one-hole lug 24" Factory attached two-hole lug 24" Field attached one-hole lug 36" Field attached two-hole lug 36" 204989-1 241088-1 204989-21 241088-6

Standard Cable Entry Boots One Hole: Three Hole: Four Hole 4" Boots 204679A-5 204679A-7 204679A-16 5" Boots 48939A-6 48939A-8 48939A-17

EASIAX Plus Automated Cable Prep Tool (V2 connectors only) EASIAX Cutting Tool FSJ4/FSJ1 EASIAX Cutting Tool FSJ4/FSJ2 Cable Flare Tool DIN Connector Coupling Torque Wrench N Connector Coupling Torque Wrench CPT-F4B 207865 241372 224363 244377 244379
488
3/8" Extraflexible Foam Dielectric, EFX Series 50-ohm

Frequency MHz Attenuation dB/100 ft 0.074 0.105 0.129 0.149 0.335 0.476 0.584 0.759 1.01 1.08 1.13 1.34 1.44 1.55 1.92 2.24 2.39 2.52 2.56 2.78 3.03 3.25 3.31 3.46 3.59 3.68 4.16 4.60 4.94 5.10 5.41 5.57 5.71 5.86 6.83 7.35 8.08 9.23 10.3 12.3 14.1 15.9 17.1 Attenuation dB/100 m 0.244 0.345 0.423 0.488 1.10 1.56 1.92 2.49 3.33 3.56 3.70 4.39 4.74 5.10 6.31 7.35 7.83 8.28 8.39 9.13 9.93 10.7 10.8 11.3 11.8 12.1 13.6 15.1 16.2 16.7 17.8 18.3 18.7 19.2 22.4 24.1 26.5 30.3 33.8 40.3 46.3 52.0 56.1 Average Power, kW 15.6 15.6 15.6 15.6 6.97 4.90 3.99 3.07 2.30 2.15 2.07 1.74 1.61 1.50 1.21 1.04 0.978 0.924 0.913 0.838 0.771 0.717 0.706 0.675 0.649 0.635 0.561 0.507 0.473 0.458 0.431 0.419 0.408 0.398 0.342 0.318 0.289 0.253 0.227 0.190 0.165 0.147 0.137
EFX2-50

Extraflexible Cable 3/8" Extraflexible Cable, Standard Jacket Fire Retardant Cables 3/8" Fire Retardant Jacket (CATVX) 3/8" Fire Retardant Jacket (CATVR) Low VSWR Cables Jumper Cable Assemblies See page 584
EFX2-50
EFX2RN-50 EFX2RN-50 EFX2P-50-(**)
Characteristics
Electrical Impedance, ohms Maximum Frequency, GHz Velocity, percent Peak Power Rating, kW dc Resistance, ohms/1000 ft (1000 m) Inner Outer dc Breakdown, volts Jacket Spark, volts RMS Capacitance, pF/ft (m) Inductance, H/ft (m) Mechanical Outer Conductor Copper Inner Conductor Copper-Clad Aluminum Diameter over Jacket, in (mm) 0.45 (11.3) Diameter over Copper Outer Conductor, in (mm) 0.38 (9.7) Minimum Bending Radius, in (mm) 1.75 (45) Number of Bends, minimum (typical) 15 Bending Moment, lb-ft (Nm) 1.7 (2.3) Cable Weight, lb/ft (kg/m) 0.09 (0.13) Tensile Strength, lb (kg) 175 (79) Flat Plate Crush Strength, lb/in (kg/mm) 120 (2.1) U.K. 0800-250055 Australia 1800-803 219 New Zealand 0800-441-747 50 1 13.5 85 15.6 1.1 (3.6) 0.92 (3.0) 2500 5000 24.1 (79.0) 0.06 (0.20)
0.5 1 1.5 2 10 20 30 50 88 100 108 150 174 200 300 400 450 500 512 600 700 800 824 894 960 1000 1250 1500 1700 1800 2000 2100 2200 2300 3000 3400 4000 5000 6000 8000 10000 12000 13500
489
E2PNM-H N Male
E2PNR-HC N Male Right Angle
Connectors
Interface N Male N Male N Male N Female N Female N Female 7-16 DIN Male 7-16 DIN Male 7-16 DIN Female TNC Male TNC Female UHF Male UHF Female SMA Male Description Hex Head Right Angle Bulkhead Right Angle Type Number E2PNM-H E2PNM-HC E2PNR-HC E2PNF-C E2PNF E2PNF-BH E2PDM-C E2PDR-C E2PDF-C E2PTM E2PTF E2UM E2UF E2SM Inner Contact Attachment Solder Captivated Captivated Captivated Solder Solder Captivated Captivated Captivated Solder Solder Solder Solder Solder Outer Contact Attachment Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Plating Code SG SG SG SG SG SG SS SS SS SG NG BB BS BG Max. Length in (mm) 2.0 (52) 2.16 (54.8)/0.89 (17.6) 2.4/1.5 (60.4/37.7) 2.4 (61) 2.5 (63.7) 2.1 (53) 2.9 (74.4)/45.5 (1.8) 2.1 (53) 2.2 (56) 1.9 (49) 2.2 (56) 2.1 (53) 2.2 (56) Max. Dia. in (mm) 0.94 (23.9) 0.89 (17.6) 0.91 (23.1) 0.69 (17.6) 0.86 (21.4) 1.41 (35.9) 1.4 (35.9) 1.10 (27.9) 0.63 (16.1) 0.63 (16.1) 0.77 (19.6) 0.68 (17.3) 0.68 (17.3)
Plating Codes: BG - Brass Body and Gold Plated Pin, BS - Brass Body and Silver Plated Pin, NG - Nickel Plated Body and Gold Plated Pin, SG - SIlver Plated Body and Gold Plated Pin, SS - Silver Plated Body and Pin
Low VSWR Specifications, Type EFX2P-50-( )

Frequency Band, GHz 0.806-0.960 0.806-0.960 and 1.7- 2.2 1.7- 2.2 Type No. EFX2P-50-40 EFX2P-50-42 EFX2P-50-41 Using Connector Type** N 7-16 DIN N 7-16 DIN N 7-16 DIN Assembly VSWR, Maximum (R.L., dB) 0-10 ft (0-3 m) 10-20 ft (3-6 m) 1.08 (28.3) 1.08 (28.3) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4)
**Connectors ordered separately. VSWR values apply to straight connectors only, are guaranteed for factory fit assemblies, and are typical for cut lengths. If two different connector interfaces are selected, the higher VSWR value is guaranteed.
Accessories

see pages 599-607 Insulated Hanger, single. Recommended maximum spacing is 2.5 ft (0.76 m). For different spacing recommendations, refer to Cable Hanger Spacing, page 593-598 11662-3 Support/Hoisting Grip. Use at 200-ft (60m) intervals. Grip with one clamp E2SGRIP Support clamp kit of 10 E2SGRIP-2IK

see pages 617-618 Cold Shrink Weatherproofing Kit 3/8" Coax to 3/8" Coax with N Connector 5/8" Coax to 3/8" Coax 7/8" Coax to 3/8" Coax 1-1/4" or 1-5/8" Coax to 3/8" Coax 2 1/4" Coax to 3/8" Coax 3/8" Coax to 1-1/2" Omni Panel Base type N or DIN 3/8" Coax to 2" Omni Panel Base type N or DIN Connector/Splice Weatherproofing Kit

241475-10 241475-13 241475-9 241475-5A 241475-8 241548-8 241548-9 221213


EASIAX Plus Automated Cable Prep Tool for: DIN Connectors N Connectors DIN Connector Coupling Torque Wrench N Connector Coupling Torque Wrench CPT-E2L2DIN CPT-E2L2N 244377 244379
490
Revised 9/00 & 3/01
1/4" Foam Dielectric, LDF Series 50-ohm
LDF1-50

Frequency MHz 0.5 1 1.5 2 10 20 30 50 88 100 108 150 174 200 300 400 450 500 512 600 700 800 824 894 960 1000 1250 1500 1700 1800 2000 2100 2200 2300 3000 3400 4000 5000 6000 8000 10000 12000 14000 15800 Attenuation dB/100 ft 0.085 0.120 0.147 0.170 0.382 0.543 0.667 0.865 1.16 1.23 1.28 1.52 1.64 1.77 2.18 2.54 2.71 2.86 2.90 3.15 3.43 3.68 3.74 3.91 4.07 4.16 4.70 5.19 5.57 5.75 6.10 6.27 6.43 6.60 7.67 8.24 9.06 10.3 11.5 13.7 15.7 17.6 19.4 20.9 Attenuation dB/100 m 0.278 0.394 0.483 0.558 1.25 1.78 2.19 2.84 3.79 4.05 4.21 4.99 5.39 5.80 7.17 8.34 8.88 9.39 9.51 10.4 11.2 12.1 12.3 12.8 13.3 13.6 15.4 17.0 18.3 18.9 20.0 20.6 21.1 21.6 25.2 27.0 29.7 33.9 37.7 44.9 51.5 57.7 63.5 68.6 Average Power, kW 12.1 12.1 12.1 12.1 5.79 4.08 3.32 2.56 1.92 1.79 1.72 1.45 1.35 1.25 1.01 0.871 0.818 0.773 0.764 0.702 0.646 0.601 0.592 0.566 0.545 0.533 0.471 0.426 0.398 0.385 0.363 0.353 0.344 0.336 0.289 0.269 0.245 0.215 0.193 0.162 0.141 0.126 0.114 0.106

Standard Cable 1/4" Standard Cable, Standard Jacket Fire Retardant Cables 1/4" Fire Retardant Jacket (CATVX) 1/4" Fire Retardant Jacket (CATVR) Jumper Cable Assemblies See page 584 LDF1RN-50 LDF1RN-50 LDF1-50
Characteristics
Electrical Impedance, ohms Maximum Frequency, GHz Velocity, percent Peak Power Rating, kW dc Resistance, ohms/1000 ft (1000 m) Inner Outer dc Breakdown, volts Jacket Spark, volts RMS Capacitance, pF/ft (m) Inductance, H/ft (m) Mechanical Outer Conductor Copper Inner Conductor Copper-Clad Aluminum Diameter over Jacket, in (mm) 0.345 (8.8) Diameter over Copper Outer Conductor, in (mm) 0.31 (7.7) Diameter Inner Conductor, in (mm) 0.102 (2.6) Minimum Bending Radius, in (mm) 3.0 (76) Number of Bends, minimum (typical) 15 (30) Bending Moment, lb-ft (Nm) 0.98 (1.33) Cable Weight, lb/ft (kg/m) 0.06 (0.09) Tensile Strength, lb (kg) 200 (91) Flat Plate Crush Strength, lb/in (kg/mm) 80 (1.4) 50 1 15.8 86 12.1 1.57 (5.15) 1.02 (3.33) 2200 5000 23.4 (76.8) 0.059 (0.19)
491
N Male L1PNR-HC
N Male L1PNM-H
N Female L1PNF
Connectors
Interface N Male N Male N Male N Female N Female N Female Description Hex Head Hex Head Right Angle Bulkhead Type Number L1PNM-H L1PNM-HC L1PNR-HC L1PNF L1PNF-C L1PNF-BH Inner Contact Attachment Solder Captivated Captivated Solder Captivated Solder Outer Contact Attachment Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Plating Code SG SS SG SG SG SG Max. Length in (mm) 1.9 (49) 2 (52) 2.3/1.3 (58.3/32.7) 2.1 (52) 2.1 (52) Max. Dia. in (mm) 0.94 (23.9) 0.89 (17.6) 0.91 (23.1) 0.62 (15.7) 0.88 (22.4)
Plating Codes: SG - SIlver Plated Body and Gold Plated Pin
Low VSWR Specifications, Type LDF1P-50-( )

Frequency Band, GHz 0.806-0.960 0.806-0.960 and 1.7- 2.2 1.7- 2.2 Type No. LDF1P-50-40 LDF1P-50-42 LDF1P-50-41 Using Connector Type** N 7-16 DIN N 7-16 DIN N 7-16 DIN Assembly VSWR, Maximum (R.L., dB) 0-10 ft (0-3 m) 10-20 ft (3-6 m) 1.08 (28.3) 1.08 (28.3) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4)
**Connectors ordered separately. VSWR values apply to straight connectors only, are guaranteed for factory fit assemblies, and are typical for cut lengths. If two different connector interfaces are selected, the higher VSWR value is guaranteed.
Accessories

see pages 599-607 Insulated Hanger, single. Recommended maximum spacing is 2.5 ft (0.76 m). For different spacing recommendations, refer to Cable Hanger Spacing, page 593-598 11662-3 Angle Adapter, for insulated hanger 40430-1 Nylon Cable Tie Kit of 50, Indoor use, Recommended maximum spacing is 1.5 ft (0.5 m) 40417 Nylon Cable Tie Kit in plastic box. 100 each 4, 5.5 and 7.5 inch ties. Indoor use, Recommended maximum spacing is 1.5 ft (0.5 m) CT-K350 Velcro Cable Ties, Black, 8 inch. Indoor Use Kit of 10 VCT8-10 Kit of 50 VCT8-50 Kit of 100 VCT8-100 Support/Hoisting Grip. Use at 200-ft (60m) intervals. Grip with one clamp L1SGRIP Support clamp kit of 10 L1SGRIP-1IK


pages 617-618 Cold Shrink Weatherproofing Kit 5/8" Coax to 1/4" Coax 7/8" Coax to 1/4" Coax 1-1/4" or 1-5/8" Coax to 1/4" Coax 1/4" to 1-1/2" Omni/Panel base Type N or DIN 1/4" to 2" Omni/Panel base Type N or DIN Connector/Splice Weatherproofing Kit
241475-13 241475-12 241475-11 241548-10 241548-11 221213

Connector Accessories See page 624 Tools for additional tool offerings see pages 620-623 Factory Attached Connectors For factory made cable assemblies and jumper cables, see pages 584-587.
EASIAX Plus Automated Cable Prep Tool DIN Connector Coupling Torque Wrench N Connector Coupling Torque Wrench CPT-L1 244377 244379
492
Revised 7/00 & 3/01
LDF2-50

Frequency MHz 0.5 1 1.5 2 10 20 30 50 88 100 108 150 174 200 300 400 450 500 512 600 700 800 824 894 960 1000 1250 1500 1700 1800 2000 2100 2200 2300 3000 3400 4000 5000 6000 8000 10000 12000 13500 Attenuation dB/100 ft 0.072 0.101 0.124 0.143 0.323 0.458 0.563 0.730 0.976 1.04 1.08 1.29 1.39 1.49 1.85 2.15 2.29 2.42 2.45 2.67 2.90 3.12 3.17 3.31 3.44 3.52 3.98 4.40 4.72 4.87 5.17 5.32 5.46 5.60 6.52 7.00 7.70 8.78 9.79 11.7 13.4 15.0 16.2 Attenuation dB/100 m 0.235 0.332 0.407 0.471 1.06 1.50 1.85 2.40 3.20 3.42 3.56 4.22 4.56 4.90 6.06 7.06 7.51 7.95 8.05 8.76 9.52 10.2 10.4 10.9 11.3 11.6 13.1 14.4 15.5 16.0 17.0 17.4 17.9 18.4 21.4 23.0 25.3 28.8 32.1 38.2 43.9 49.2 53.0 Average Power, kW 15.6 15.6 15.6 15.6 7.23 5.09 4.14 3.19 2.39 2.24 2.15 1.81 1.68 1.56 1.26 1.08 1.02 0.963 0.951 0.874 0.804 0.748 0.736 0.704 0.678 0.663 0.586 0.530 0.494 0.479 0.451 0.439 0.428 0.417 0.358 0.333 0.303 0.266 0.239 0.200 0.175 0.156 0.145

Standard Cable 3/8" Standard Cable, Standard Jacket Fire Retardant Cables 3/8" Fire Retardant Jacket (CATVX) 3/8" Fire Retardant Jacket (CATVR) Low VSWR and Specialized Cables 3/8" Low VSWR, specify operating band Phase Stabilized and Phase Measured Cable Jumper Cable Assemblies See page 584
LDF2-50
LDF2RN-50 LDF2RN-50
LDF2P-50-(**) See page 590
Characteristics
Electrical Impedance, ohms Maximum Frequency, GHz Velocity, percent Peak Power Rating, kW dc Resistance, ohms/1000 ft (1000 m) Inner Outer dc Breakdown, volts Jacket Spark, volts RMS Capacitance, pF/ft (m) Inductance, H/ft (m) Mechanical Outer Conductor Copper Inner Conductor Copper-Clad Aluminum Diameter over Jacket, in (mm) 0.44 (11) Diameter over Copper Outer Conductor, in (mm) 0.38 (9.7) Diameter Inner Conductor, in (mm) 0.122 (3.1) Minimum Bending Radius, in (mm) 3.75 (95) Number of Bends, minimum (typical) 15 (60) Bending Moment, lb-ft (Nm) 1.4 (1.9) Cable Weight, lb/ft (kg/m) 0.08 (0.12) Tensile Strength, lb (kg) 250 (113) Flat Plate Crush Strength, lb/in (kg/mm) 110 (2.0) 50 1 13.5 88 15.6 1.06 (3.48) 0.87 (2.85) 2500 5000 23.0 (75.5) 0.058 (0.19)
493
N Male L2PNM-H
N Female L2PNF
7-16 DIN Male L2PDM-C
UHF Male L42P
TNC Male L2PTM
SMA Male L42WS
Connectors
Interface N Male N Male N Female N Female 4.1/9.5 DIN 4.1/9.5 DIN 4.1/9.5 DIN 7-16 DIN Male 7-16 DIN Female 7-16 DIN Female UHF Male UHF Female SMA Male TNC Male TNC Female Description Hex Head Hex Head Bulk Head Right Angle Panel Mount Type Number L2PNM-H L2PNM-HC L2PNF L2PNF-BH L2PKM-C L2PKM L2PKR-C L2PDM-C L2PDF-C L2PDF-PMC L42P L42U L42WS L42EWT L42ENT Inner Contact Attachment Solder Captivated Solder Solder Captivated Solder Captivated Captivated Captivated Captivated Solder Solder Solder Solder Solder Outer Contact Attachment Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Plating Code SG SG SG SG SS SS SS SS SS SS BB BB BG NG NG Max. Length in (mm) 2.1 (53) 2.1 (53) 2.4 (61) 2.4 (61) 1.9 (48) 1.9 (48) 2.0/1.5 (50/38) 1.9 (48) 1.9 (48) 1.9 (48) 2.3 (58) 2.3 (58) 2.2 (56) 2.1 (53) 1.9 (48) Max. Dia. in (mm) 0.94 (23.9) 0.94 (23.9) 0.63 (16.0) 0.88 (22.4) 0.95 (24.1) 0.95 (24.1) 0.95 (24.1) 1.1 (27.9) 1.4 (35.6) 1.25 (31.8) 0.68 (17.3) 0.91 (23.1) 0.68 (17.3) 0.68 (17.3) 0.68 (17.3)
Plating Codes: BB - Brass Body and Pin, BS - Brass Body and Silver Plated Pin, NG - Nickel Plated Body and Gold Plated Pin, SG - SIlver Plated Body and Gold Plated Pin, SS - Silver Plated Body and Pin
494

Frequency Band, GHz 0.806-0.960 0.806-0.960 and 1.7- 2.2 1.7- 2.2 Up to 2.3 * Up to 4.2 * Up to 8.5 * Up to 13.5 * Type No. LDF2P-50-40 LDF2P-50-42 LDF2P-50-41 LDF2P-50-1 Using Connector Type** N 7-16 DIN N 7-16 DIN N 7-16 DIN N Male N Female TNC Male N Male N Female N Male N Male: L2PNM Assembly VSWR, Maximum (R.L., dB) 0-10 ft (0-3 m) 10-20 ft (3-6 m) 1.08 (28.3) 1.08 (28.3) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.15 (23.1) 1.15 (23.1) 1.20 (20.8) 1.20 (20.8) 1.35 (16.6) 1.25 (19.9) 1.30 (17.7) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.20 (20.8) 1.25 (19.9) 1.30 (17.7) 1.35 (16.6) 1.45 (14.7) 1.35 (16.6) 1.35 (16.6)
LDF2P-50-2 LDF2P-50-3 LDF2P-50-4
* Specify operating band. ** Connectors ordered separately. VSWR values apply to straight connectors only, are guaranteed for factory fit assemblies, and are typical for cut lengths. If two different connector interfaces are selected, the higher VSWR value is guaranteed.
Accessories

see pages 599-607 Insulated Hanger, single. Recommended maximum spacing is 2.5 ft (0.76 m). For different spacing recommendations, refer to Cable Hanger Spacing, page 593-598 11662-3 Angle Adapter, for insulated hanger 40430-1 Nylon Cable Tie Kit of 50, Indoor use, Recommended maximum spacing is 1.5 ft (0.5 m) 40417 Nylon Cable Tie Kit in plastic box. 100 each 4, 5.5 and 7.5 inch ties. Indoor use, Recommended maximum spacing is 1.5 ft (0.5 m) CT-K350 Velcro Cable Ties, Black, 8 inch. Indoor Use Kit of 10 VCT8-10 Kit of 50 VCT8-50 Kit of 100 VCT8-100 Support/Hoisting Grip. Use at 200-ft (60m) intervals. Grip with one clamp L2SGRIP Support clamp kit of 10 L2SGRIP-2IK

see pages 617-618 Cold Shrink Weatherproofing Kit 3/8" Coax to 3/8" Coax with N Connector 5/8" Coax to 3/8" Coax 7/8" Coax to 3/8" Coax 1-1/4" or 1-5/8" Coax to 3/8" Coax 2 1/4" Coax to 3/8" Coax 3/8" Coax to 1-1/2" Omni Panel Base type N or DIN 3/8" Coax to 2" Omni Panel Base type N or DIN Connector/Splice Weatherproofing Kit
241475-10 241475-13 241475-9 241475-5A 241475-8 241548-8 241548-9 221213


EASIAX Plus Automated Cable Prep Tool for: DIN Connectors N Connectors DIN Connector Coupling Torque Wrench N Connector Coupling Torque Wrench CPT-E2L2DIN CPT-E2L2N 244377 244379

495
LDF4-50A

Frequency MHz 0.5 1 1.5 2 10 20 30 50 88 100 108 150 174 200 300 400 450 500 512 600 700 800 824 894 960 1000 1250 1500 1700 1800 2000 2100 2200 2300 3000 3400 4000 5000 6000 8000 8800 Attenuation dB/100 ft 0.045 0.064 0.079 0.091 0.205 0.291 0.357 0.463 0.619 0.661 0.688 0.815 0.880 0.946 1.17 1.36 1.45 1.53 1.55 1.69 1.83 1.97 2.00 2.09 2.17 2.22 2.51 2.77 2.97 3.07 3.25 3.34 3.43 3.52 4.09 4.39 4.82 5.49 6.11 7.26 7.69 Attenuation dB/100 m 0.149 0.211 0.259 0.299 0.672 0.954 1.17 1.52 2.03 2.17 2.26 2.67 2.89 3.10 3.83 4.46 4.75 5.02 5.08 5.53 6.01 6.46 6.56 6.85 7.12 7.28 8.23 9.09 9.74 10.1 10.7 11.0 11.2 11.5 13.4 14.4 15.8 18.0 20.1 23.8 25.2 Average Power, kW 40.0 35.8 29.2 25.3 11.3 7.93 6.46 4.98 3.73 3.49 3.36 2.83 2.62 2.44 1.97 1.70 1.59 1.51 1.49 1.37 1.26 1.17 1.15 1.10 1.06 1.04 0.921 0.833 0.777 0.753 0.710 0.691 0.673 0.657 0.565 0.526 0.479 0.421 0.378 0.318 0.300

Standard Cable 1/2" Standard Cable, Standard Jacket Fire Retardant Cables 1/2" Fire Retardant Jacket (CATVX) 1/2" Fire Retardant Jacket (CATVR) Low VSWR and Specialized Cables 1/2" Low VSWR, specify operating band Phase Stabilized and Phase Measured Cable Jumper Cable Assemblies See page 584
LDF4-50A
LDF4RN-50A LDF4RN-50A
LDF4P-50A-(**) See page 590
Characteristics
Electrical Impedance, ohms Maximum Frequency, GHz Velocity, percent Peak Power Rating, kW dc Resistance, ohms/1000 ft (1000 m) Inner Outer dc Breakdown, volts Jacket Spark, volts RMS Capacitance, pF/ft (m) Inductance, H/ft (m) Mechanical Outer Conductor Copper Inner Conductor Copper-Clad Aluminum Diameter over Jacket, in (mm) 0.63 (16) Diameter over Copper Outer Conductor, in (mm) 0.55 (14) Diameter Inner Conductor, in (mm) 0.189 (4.6) Nominal Inside Transverse Dimensions, cm 1.11 Minimum Bending Radius, in (mm) 5 (125) Number of Bends, minimum (typical) 15 (50) Bending Moment, lb-ft (Nm) 2.8 (3.8) Cable Weight, lb/ft (kg/m) 0.15 (0.22) Tensile Strength, lb (kg) 250 (113) Flat Plate Crush Strength, lb/in (kg/mm) 110 (2.0) 50 1 8.8 88 40 0.45 (1.48) 0.58 (1.90) 4000 8000 23.1 (75.8) 0.058 (0.19)
496
Revised 9/00
N Male L4PNM-RC
N Female L4PNF-RC
7-16 DIN Male L4PDM-RC
7-16 DIN Female L4PDF-RC
7/8'' EIA Flange L44R
UHF Male L44P
Connectors
Interface N Male N Male N Male N Male N Female N Female N Female N Female 7-16 DIN Male 7-16 DIN Male 7-16 DIN Male 7-16 DIN Male 7-16 DIN Female 7-16 DIN Female 7-16 DIN Female 7-16 DIN Female 7-16 DIN Female 7/8" EIA Flange 7/8" EIA Flange F Flange Male F Flange Female UHF Male UHF Female HN Male LC Male TNC Female End Terminal Splice Description Hex Head RingFlare Right Angle, Hex Right Angle, Hex Bulk Head Panel Mount RingFlare Right Angle Right Angle RingFlare Bulk Head Bulk Head Panel Mount RingFlare Right Angle Type Number L4PNM-H L4PNM-RC L4PNR-H L4PNR-HC L4PNF L4PNF-BH L4PNF-PM L4PNF-RC L4PDM L4PDR L4PDR-C L4PDM-RC L4PDF L4PDF-BH L4PDF-BHC L4PDF-PM L4PDF-RC L44R 124990-1 L44F 209865 L44P L44U L44J L44M L44NT L44T L44Z Inner Contact Attachment Solder Captivated Solder Captivated Solder Solder Solder Captivated Solder Solder Captivated Captivated Solder Solder Captivated Solder Captivated Solder Solder Solder Solder Solder Solder Solder Solder Solder Solder Solder Outer Contact Attachment Self-Flare RingFlare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare RingFlare Self-Flare Self-Flare Self-Flare Ring-Flare Self-Flare Self-Flare Self-Flare Self-Flare RingFlare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Plating Code SG SG SG SG SG SG SG SG SS SS SS SS SS SS SS SS SS BB BB BB BS BB BS BB BB BB BB BB Max. Length in (mm) 2.6 (66) 3.0 (75.7) 3.2/1.5 (81/38) 3.2/1.5 (81/38) 2.6 (66) 2.6 (66) 2.6 (66) 2.8 (71) 2.6 (66) 1.8/2.8 (46/72) 1.8/2.8 (46/72) 2.64 (67.1) 2.7 (69) 2.73 (69.4) 2.9 (74) 2.7 (69) 2.8 (71) 3.2 (81) 2.3/1.6 (58/41) 2.3 (58) 2.3 (58) 2.3 (58) 2.3 (58) 2.5 (64) 3.6 (91) 2.8 (71) 4.0 (102) 3.2 (81) Max. Dia. in (mm) 0.95 (24.1) 0.86 (21.8) 0.95 (24.1) 0.91 (23.1) 0.94 (23.9) 0.96 (24.4) 1.0 (25.4) 0.86 (21.8) 1.4 (35.6) 1.41 (35.9) 1.41 (35.9) 0.86 (21.8) 1.1 (27.9) 1.62 (41.1) 1.63 (41.4) 1.2 (29.4) 0.86 (21.8) 2.25 (57.2) 2.25 (57.2) 2.25 (57.2) 2.25 (57.2) 0.91 (23.1) 0.91 (23.1) 0.91 (23.1) 0.91 (23.1) 0.94 (23.9) 0.91 (23.1) 1.1 (27.9)
497
Standard VSWR Specifications

Frequency Band, GHz 0.806-0.960 and 1.7-2.0 Type No. LDF4-50A LDF4RN-50A 1-25 ft (0.3-8 m) 1.09 (27.3)* 1.09 (27.3)* Assembly VSWR, Maximum (R.L., dB) 25-100 ft 100-200 ft 200-500 ft (8-30 m) (30-60 m) (60-150 m) 1.11 (25.7)* 1.11 (25.7)* 1.13 (24.3)* 1.13 (24.3)* 1.13 (24.3)* 1.13 (24.3)* Above 500 ft (150 m) 1.13 (24.3)** 1.13 (24.3)**
* Expected typical values based on guaranteed 1.13 VSWR for bulk cable and Type N or DIN straight connectors. If guaranteed values are required, contact Andrew. ** 1.13 VSWR guaranteed for bulk standard cable lengths 500 ft and above.
Low VSWR Specifications, Type LDF4P-50A-( )

Frequency Band, GHz 0.806-0.960 0.8060.960 and 1.7-2.2 1.427-1.535 Type No. LDF4P-50A-40 LDF4P-50A-42 LDF4P-50A-4 1-25 ft Using Connector Type** (0.3-8 m) N 7-16 DIN N 7-16 DIN N F Flange, 7/8" EIA 7-16 DIN SC Male, TNC Female LC Male Right Angle N Male N F Flange 7-16 DIN F Flange Female SC Male Right Angle N Male TNC Female LC Male N 7-16 DIN N F Flange, 7/8" EIA 7-16 DIN Male 7-16 DIN Female SC Male LC Male Right Angle N Male TNC Female N Male 7/8" EIA 7-16 DIN SC Male LC Male, TNC Female Right Angle N Male N Male N Female 7/8" EIA 7-16 DIN SC Male Right Angle N Male TNC Female LC Male N Male 7/8" EIA SC Male N Male 7-16 DIN Male SC Male TNC Female N Male N Female 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.20 (20.8) 1.35 (16.5) 1.35 (16.5) 1.12 (24.9) 1.12 (24.9) 1.12 (24.9) 1.20 (20.8) 1.20 (20.8) 1.35 (16.5) 1.35 (16.5) 1.35 (16.5) 1.10 (26.4) 1.10 (26.4) 1.12 (24.9) 1.12 (24.9) 1.12 (24.9) 1.20 (20.8) 1.20 (20.8) 1.40 (15.6) 1.40 (15.6) 1.40 (15.6) 1.06 (30.7) 1.06 (30.7) 1.06 (30.7) 1.06 (30.7) 1.20 (20.8) 1.25 (19.1) 1.12 (24.9) 1.20 (20.8) 1.12 (24.9) 1.20 (20.8) 1.20 (20.8) 1.30 (17.7) 1.30 (17.7) 1.35 (16.5) 1.25 (19.1) 1.25 (19.1) 1.30 (17.7) 1.15 (23.1) 1.15 (23.1) 1.30 (17.7) 1.30 (17.7) 1.30 (17.7) 1.40 (15.6) Assembly VSWR, Maximum (R.L., dB) 25-100 ft 100-200 ft 200-500 ft (8-30 m) (30-60 m) (60-150 m) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.20 (20.8) 1.35 (16.5) 1.35 (16.5) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.20 (20.8) 1.20 (20.8) 1.35 (16.5) 1.35 (16.5) 1.35 (16.5) 1.10 (26.4) 1.10 (26.4) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.20 (20.8) 1.20 (20.8) 1.40 (15.6) 1.40 (15.6) 1.40 (15.6) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.20 (20.8) 1.25 (19.1) 1.15 (23.1) 1.20 (20.8) 1.15 (23.1) 1.20 (20.8) 1.20 (20.8) 1.30 (17.7) 1.30 (17.7) 1.32 (17.2) 1.25 (19.1) 1.25 (19.1) 1.30 (17.7) 1.15 (23.1) 1.15 (23.1) 1.30 (17.7) 1.30 (17.7) 1.30 (17.7) 1.35 (16.5) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.12 (24.9) 1.12 (24.9) 1.12 (24.9) 1.20 (20.8) 1.32 (17.2) 1.32 (17.2) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.20 (20.8) 1.20 (20.8) 1.30 (17.7) 1.30 (17.7) 1.30 (17.7) 1.10 (26.4) 1.10 (26.4) 1.18 (21.6) 1.18 (21.6) 1.18 (21.6) 1.22 (20.1) 1.22 (20.1) 1.35 (16.5) 1.35 (16.5) 1.35 (16.5) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.25 (19.1) 1.28 (18.2) 1.18 (21.6) 1.20 (20.8) 1.18 (21.6) 1.20 (20.8) 1.20 (20.8) 1.30 (17.7) 1.30 (17.7) 1.32 (17.2) 1.25 (19.1) 1.25 (19.1) 1.30 (17.7) 1.20 (20.8) 1.20 (20.8) 1.30 (17.7) 1.30 (17.7) 1.30 (17.7) 1.35 (16.5) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.20 (20.8) 1.30 (17.7) 1.30 (17.7) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.20 (20.8) 1.20 (20.8) 1.30 (17.7) 1.30 (17.7) 1.30 (17.7) 1.10 (26.4) 1.10 (26.4) 1.20 (20.8) 1.20 (20.8) 1.20 (20.8) 1.22 (20.1) 1.22 (20.1) 1.35 (16.5) 1.35 (16.5) 1.35 (16.5) 1.20 (20.8) 1.20 (20.8) 1.20 (20.8) 1.20 (20.8) 1.30 (17.7) 1.30 (17.7) 1.20 (20.8) 1.20 (20.8) 1.20 (20.8) 1.20 (20.8) 1.25 (19.1) 1.30 (17.7) 1.30 (17.7) 1.32 (17.2) 1.25 (19.1) 1.25 (19.1) 1.30 (17.7) 1.20 (20.8) 1.20 (20.8) 1.30 (17.7) 1.30 (17.7) 1.30 (17.7) 1.35 (16.5) Above 500 ft (150 m) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.20 (20.8) 1.30 (17.7) 1.30 (17.7) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.20 (20.8) 1.20 (20.8) 1.30 (17.7) 1.30 (17.7) 1.30 (17.7) 1.10 (26.4) 1.10 (26.4) 1.20 (20.8) 1.20 (20.8) 1.20 (20.8) 1.22 (20.1) 1.22 (20.1) 1.30 (17.7) 1.30 (17.7) 1.30 (17.7) 1.25 (19.1) 1.25 (19.1) 1.25 (19.1) 1.25 (19.1) 1.30 (17.7) 1.32 (17.2) 1.25 (19.1) 1.25 (19.1) 1.25 (19.1) 1.25 (19.1) 1.25 (19.1) 1.30 (17.7) 1.30 (17.7) 1.32 (17.2) 1.25 (19.1) 1.25 (19.1) 1.30 (17.7) 1.25 (19.1) 1.25 (19.1) 1.30 (17.7) 1.30 (17.7) 1.30 (17.7) 1.35 (16.5)
1.6-2.3
LDF4P-50A-10
1.7-2.2 0.940-2.7
LDF4P-50A-41 LDF4P-50A-3
0.01-0.806
LDF4P-50A-6
0.01-2.7*
LDF4P-50A-7
3.6-6.5*
LDF4P-50A-5
0.1-4.2*
LDF4P-50A-8
0.1-8.4*
LDF4P-50A-9
* Specify operating band. ** Connectors ordered separately. VSWR values apply to straight connectors only (except when noted otherwise), are guaranteed for factory fit assemblies, and are typical for field cut lengths. If two different connector interfaces are selected, the higher VSWR value is guaranteed.
498
Revised 3/01
Accessories
Hangers For more hangers, adapters and mounting

hardware see pages 599-607 Standard Hangers Kit of 10. Recommended maximum spacing is 3-ft (1 m). For different spacing recommendations, refer to Cable Hanger Spacing, page 593-598 43211A Hardware Kit of 10. 3/8" bolts, lockwashers, nuts 3/4" (19mm) long 1" (25mm) long 31769-5 31769-1

kits and our surge protection offerings, see pages 609-616 SureGround Grounding Kit with standard weatherproofing Factory attached one-hole lug, 600 mm (24") lead Factory attached two-hole lug, 600 mm (24") lead Field attached two-hole lug, 1500 mm (59") lead SGL4-06B1 SGL4-06B2 SGL4-15B4
SureGround Plus Grounding Kit with weatherproofing boot Factory attached one-hole lug, 600 mm (24") lead Factory attached two-hole lug, 600 mm (24") lead Field attached two-hole lug, 1500 mm (59") lead SGPL4-06B1 SGPL4-06B2 SGPL4-15B4
Snap-In Hangers Kit of 10. For prepunched 3/4" (19mm) holes on tower member or adapters, Recommended maximum spacing is 3-ft. For different spacing recommendations, refer to Cable Hanger Spacing, page 593-598 206706-1 Click-On Hangers Kit of 10. Recommended maximum spacing is 3-ft Mounting Hardware see page 605 Kwik-Clamps Kit of 10. See page 607 for hanger options Support/Hoisting Grip. Use at 200-ft (60m) intervals. Grip with one clamp Support clamp kit of 10 Standard Hoisting Grip L4SGRIP L4SGRIP-4IK 43094 L4CLICK

see pages 617-618 WeatherShield Connector Protection Housing LDF5 to LDF4 LDF6 to LDF4 LDF7 to LDF4 Cold Shrink Weatherproofing Kit 1/2" Coax N Connector to 1/2" Coax N Connector 5/8" Coax to 1/2" Coax 7/8" Coax to 1/2" Coax 1-1/4" or 1-5/8" Coax to 1/2" Coax 2 1/4" Coax to 1/2" Coax 1/2" to 1-1/2" Omni/Panel base Type N or DIN 1/2" to 2" Omni/Panel base Type N or DIN 1/2" LDF4 to Antenna Type N interface Connector/Splice Weatherproofing Kit 241474-4 242475-13 241475-9 241475-5A 241475-8 241548-8 241548-9 241548-4 221213 WS-L5L4 WS-L6L4 WS-L7L4


EASIAX Plus Automated Cable Prep Tool EASIAX Cutting Tool Cable Flare Tool DIN Connector Coupling Torque Wrench N Connector Coupling Torque Wrench CPT-L4ARC 207866 224363 244377 244379
499
LDF4.5-50

Frequency MHz Attenuation dB/100 ft 0.032 0.045 0.056 0.064 0.145 0.207 0.254 0.330 0.443 0.473 0.493 0.586 0.633 0.682 0.847 0.989 1.05 1.12 1.13 1.23 1.34 1.45 1.47 1.54 1.60 1.64 1.86 2.07 2.22 2.30 2.44 2.51 2.58 2.65 3.11 3.35 3.70 4.25 4.76 4.81 Attenuation dB/100 m 0.105 0.149 0.183 0.211 0.476 0.678 0.834 1.08 1.45 1.55 1.62 1.92 2.08 2.24 2.78 3.24 3.46 3.66 3.71 4.05 4.41 4.75 4.83 5.05 5.26 5.38 6.11 6.78 7.29 7.54 8.02 8.25 8.48 8.70 10.2 11.0 12.1 13.9 15.6 15.8 Average Power, kW 62.0 53.5 43.6 37.7 16.7 11.8 9.57 7.36 5.49 5.14 4.93 4.15 3.84 3.57 2.87 2.46 2.31 2.18 2.15 1.97 1.81 1.68 1.65 1.58 1.52 1.48 1.31 1.18 1.10 1.06 0.996 0.968 0.942 0.918 0.783 0.726 0.658 0.573 0.511 0.506

Standard Cable 5/8" Standard Cable, Standard Jacket Fire Retardant Cables 5/8" Fire Retardant Jacket (CATVX) 5/8" Fire Retardant Jacket (CATVR) Low VSWR and Specialized Cables 5/8" Low VSWR, specify operating band LDF4.5P-50-(**) LDF4.5RN-50 LDF4.5RN-50 LDF4.5-50
Characteristics
Electrical Impedance, ohms Maximum Frequency, GHz Velocity, percent Peak Power Rating, kW dc resistance, ohms/1000 ft (1000 m) Inner Outer dc Breakdown, volts Jacket Spark, volts RMS Capacitance, pF/ft (m) Inductance, H/ft (m) Mechanical Outer Conductor Copper Inner Conductor Copper-Clad Aluminum Diameter over Jacket, in (mm) 0.865 (21.97) Diameter over Copper Outer Conductor, in (mm) 0.777 (19.74) Diameter Inner Conductor, in (mm) 0.277 (7.04) Minimum Bending Radius, in (mm) 8 (200) Number of Bends, minimum (typical) 15 (40) Bending Moment, lb-ft (Nm) 2.8 (3.8) Cable Weight, lb/ft (kg/m) 0.27 (0.402) Tensile Strength, lb (kg) 800 (363) Flat Plate Crush Strength, lb/in (kg/mm) 70 (1.3) 50 1 6.1 89 62 0.15 (0.49) 0.42 (1.37) 5000 8000 23.2 (76.1) 0.057 (0.187)
0.5 1 1.5 2 10 20 30 50 88 100 108 150 174 200 300 400 450 500 512 600 700 800 824 894 960 1000 1250 1500 1700 1800 2000 2100 2200 2300 3000 3400 4000 5000 6000 6100
500
Revised 9/00
N Male L4.5PNM-RC
N Female L4.5PNF-RC
7-16 DIN Male L4.5PDM-RC
7-16 DIN Female L4.5PDF-RC
Connectors
Interface N Male N Female 7-16 DIN Male 7-16 DIN Female Description Ring Flare Ring Flare Ring Flare Ring Flare Type Number L4.5PNM-RC L4.5PNF-RC L4.5PDM-RC L4.5PDF-RC Inner Contact Attachment Captivated Captivated Captivated Captivated Outer Contact Attachment Self Flare Self Flare Self Flare Self Flare Plating Code SG SG SS SS Max. Length in (mm) 3.2 (81.5) 3.0 (76) 3.1 (78) 3.25 (82) Max. Dia. in (mm) 1.42 (36) 1.32 (33.5) 1.17 (29.8) 1.17 (29.8)
Plating Codes: SG - Silver Plated Body and Gold Plated Pin, SS - Silver Plated Body and Pin
Connector Accessories See page 624. Factory Attached Connectors For factory made cable assemblies and jumper cables, see pages 584-587.

Frequency Band, GHz 0.806-0.960 and 1.7-2.0 1-25 ft (0.3-8 m) 1.12 (24.9)* 1.12 (24.9)* Assembly VSWR, Maximum (R.L., dB) 25-100 ft 100-200 ft 200-500 ft (8-30 m) (30-60 m) (60-150 m) 1.13 (24.3)* 1.13 (24.3)* 1.13 (24.3)* 1.13 (24.3)* 1.13 (24.3)* 1.13 (24.3)* Above 500 ft (150 m) 1.13 (24.3)** 1.13 (24.3)**
Type Number LDF4.5-50 LDF4.5RN-50
Low VSWR Specifications, Type LDF4.5P-50-( )

Frequency Band, GHz 0.806-0.960 1.7-2.2 0.806-0.960 and 1.7-2.2 Type Number LDF4.5P-50-40 LDF4.5P-50-41 LDF4.5P-50-42 Using Connector Type* N 7-16 DIN 7-16 DIN 7-16 DIN 1-25 ft (0.3-8 m) 1.08 (28.3) 1.08 (28.3) 1.10 (26.4) 1.10 (26.4) Assembly VSWR, Maximum (R.L., dB) 25-100 ft 100-200 ft 200-500 ft (8-30 m) (30-60 m) (60-150 m) 1.08 (28.3) 1.08 (28.3) 1.10 (26.4) 1.10 (26.4) 1.09 (27.3) 1.09 (27.3) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) Above 500 ft (150 m) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4)
* Connectors ordered separately VSWR values apply to straight connectors only, are guaranteed for factory fit assemblies, and are typical for field cut lengths. If two different connector interfaces are selected, the higher VSWR value is guaranteed.
501
Accessories

hardware see pages 599-607 Standard Hangers Kit of 10. Recommended maximum spacing is 3-ft (1 m). For different spacing recommendations, refer to Cable Hanger Spacing, page 593-598 42396A-9 Hardware Kit of 10. 3/8" bolts, lockwashers, nuts 3/4" (19mm) long 1" (25mm) long 31769-5 31769-1

kits and our surge protection offerings, see pages 609-616 SureGround Grounding Kit with standard weatherproofing Factory attached one-hole lug, 600 mm (24") lead Factory attached two-hole lug, 600 mm (24") lead Field attached two-hole lug, 1500 mm (59") lead Factory attached one-hole lug, 600 mm (24") lead Factory attached two-hole lug, 600 mm (24") lead Field attached one-hole lug, 600 mm (24") lead Field attached two-hole lug, 1500 mm (59") lead SGL45-06B1 SGL45-06B2 SGL45-15B4 SGPL45-06B1 SGPL45-06B2 SGPL45-06B3 SGPL45-15B4
SureGround Plus Grounding Kit with weatherproofing boot
Snap-In Hangers Kit of 10. For prepunched 3/4" (19mm) holes on tower member or adapters, Recommended maximum spacing is 3-ft. For different spacing recommendations, refer to Cable Hanger Spacing, page 593-598 206706A-6 Click-On Hangers Kit of 10. Recommended maximum spacing is 3-ft Mounting Hardware see page 605 Kwik-Clamps Kit of 10. See page 607 for hanger options Support/Hoisting Grip. Use at 200-ft (60m) intervals. Grip with one clamp Support clamp kit of 10 Standard Hoisting Grip L45SGRIP L45SGRIP-4IK 29958 L45CLICK

see pages 617-618 Cold Shrink Weatherproofing Kit 5/8" Coax to 1/4", 3/8" or 1/2" Coax 5/8" Coax to 5/8" Coax 5/8" Coax to Antenna Type N or DIN interface Connector/Splice Weatherproofing Kit 241475-13 241474-7 241548-7 221213

Standard Cable Entry Boots One Hole: Three Hole: 4" Boots 204679A-13 204679A-14 5" Boots 48939A-14 48939A-15

EASIAX Plus Automated Cable Prep Tool 5/8" Connector Torque Wrench DIN Connector Coupling Torque Wrench N Connector Coupling Torque Wrench CPT-L45 244376 244377 244379
502
7/8" Flexible Feeder, Foam Dielectric VXL Series 50-ohm
VXL5-50

Frequency MHz 0.5 1 1.5 2 10 20 30 50 88 100 108 150 174 200 300 400 450 500 512 600 700 800 824 894 960 1000 1250 1500 1700 1800 2000 2100 2200 2300 3000 3400 4000 4900 Attenuation dB/100 ft 0.027 0.038 0.047 0.054 0.122 0.174 0.214 0.278 0.372 0.397 0.413 0.491 0.530 0.571 0.707 0.825 0.878 0.930 0.942 1.03 1.12 1.20 1.22 1.28 1.33 1.36 1.54 1.71 1.83 1.89 2.01 2.07 2.12 2.18 2.54 2.74 3.02 3.41 Attenuation dB/100 m 0.089 0.126 0.154 0.178 0.402 0.571 0.702 0.911 1.22 1.30 1.36 1.61 1.74 1.87 2.32 2.71 2.88 3.05 3.09 3.37 3.66 3.94 4.01 4.19 4.36 4.46 5.05 5.60 6.01 6.21 6.59 6.78 6.97 7.15 8.35 8.99 9.90 11.2 Average Power, kW 90.0 68.5 55.9 48.4 21.5 15.1 12.3 9.47 7.07 6.62 6.36 5.36 4.96 4.61 3.72 3.19 2.99 2.83 2.79 2.56 2.36 2.19 2.16 2.06 1.98 1.94 1.71 1.54 1.44 1.39 1.31 1.27 1.24 1.21 1.04 0.961 0.873 0.772

Standard Cable 7/8" Standard Cable, Standard Jacket Fire Retardant Cable 7/8" Fire Retardant Jacket (CATVR) Low VSWR Cables 7/8" Low VSWR, specify operating band Jumper Cable Assemblies - See page 584
**Insert suffix number from Low VSWR Specifications table, page 504
VXL5-50
VXL5RN-50
VXL5P-50-(**)
Characteristics
Electrical Impedance, ohms Maximum Frequency, GHz Velocity, percent Peak Power Rating, kW dc Resistance, ohms/1000 ft (1000 m) Inner Outer dc Breakdown, volts Jacket Spark, volts RMS Capacitance, pF/ft (m) Inductance, H/ft (m) Mechanical Outer Conductor Inner Conductor Diameter over Jacket, in (mm) Diameter over Copper Outer Conductor, in (mm) Diameter Inner Conductor, in (mm) Minimum Bending Radius, in (mm) Number of Bends, minimum (typical) Bending Moment, lb-ft (Nm) Cable Weight, lb/ft (kg/m) Tensile Strength, lb (kg) Flat Plate Crush Strength, lb/in (kg/mm) Copper Copper Tube 1.08 (27.5) 0.98 (24.9) 0.371 (9.42) 5 (125) 15 (40) 12 (16.3) 0.29 (0.43) 225 (102) 80 (1.4) 50 1 4.9 88 90 0.82 (2.70) 0.36 (1.19) 6000 8000 22.6 (74.2) 0.06 (0.197)
Standard Conditions: For Attenuation. VSWR 1.0 ambient temperature 20C (68F). For Average Power, VSWR 1.0, ambient temperature 40C (104F), inner conductor temperature 100C (212F), no solar loading.
503
N Male V5PNM-RPC
N Female V5PNF-RPC
7-16 DIN Male V5PDM-RPC
7-16 DIN Female V5PDF-RPC
Connectors
Interface Type Number Inner Contact Attachment Captivated Captivated Captivated Captivated Captivated Outer Contact Attachment Self-Flare Self-Flare Self-Flare Self-Flare Self-Tapping Plating Code SG SG SS SS BB Max. Length in (mm) 2.9 (74) 2.7 (69) 2.7 (69) 2.33 (59) 3.38 (86) Max. Dia. in (mm) 1.46 (37.2) 1.46 (37.2) 1.46 (37.2) 1.46 (37.2) 2.27 (56.7)
N Male One-Piece V5PNM-RPC N Female One-Piece V5PNF-RPC 7-16 DIN Male One-Piece V5PDM-RPC 7-16 DIN Female One-Piece V5PDF-RPC 7/8" EIA Flange V5E78
Plating Codes: BB - Brass Body and Pin, SG - Silver Plated Body and Gold Plated Pin, SS - Silver Plated Body and Pin

Type Number VXL5-50 VXL5RN-50
Low VSWR Specifications, Type VXL5P-50-( )

Frequency Band, GHz 0.806-0.960 0.806-0.960 and 1.7-2.2 1.7-2.2 Type Number VXL5P-50-40 VXL5P-50-42 VXL5P-50-41 Using Connector Type* N 7-16 DIN N 7-16 DIN N 7-16 DIN 1-25 ft (0.3-8 m) 1.08 (28.3) 1.08 (28.3) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) Assembly VSWR, Maximum (R.L., dB) 25-100 ft 100-200 ft 200-500 ft (8-30 m) (30-60 m) (60-150 m) 1.08 (28.3) 1.08 (28.3) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.09 (27.3) 1.09 (27.3) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) Above 500 ft (150 m) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4)
504
Revised 9/00, 12/00 & 3/01
Accessories

hardware see pages 599-607 Standard Hangers Kit of 10. Recommended maximum spacing is 3-ft (1 m). For different spacing recommendations, refer to Cable Hanger Spacing, page 593-598 42396A-5 Hardware Kit of 10. 3/8" bolts, lockwashers, nuts 3/4" (19mm) long 1" (25mm) long 31769-5 31769-1

kits and our surge protection offerings, see pages 609-616 SureGround Grounding Kit with standard weatherproofing Factory attached one-hole lug, 600 mm (24") lead Factory attached two-hole lug, 600 mm (24") lead Field attached two-hole lug, 1500 mm (59") lead Factory attached one-hole lug, 600 mm (24") lead Factory attached two-hole lug, 600 mm (24") lead Field attached two-hole lug, 1500 mm (59") lead SGL5-06B1 SGL5-06B2 SGL5-15B4 SGPL5-06B1 SGPL5-06B2 SGPL5-15B4
Snap-in Hangers Kit of 10. For prepunched 3/4" (19mm) holes on tower member or adapters, Recommended maximum spacing is 3-ft. For different spacing recommendations, refer to Cable Hanger Spacing, page 593-598 206706A-2 Click-On Hangers Kit of 10. Recommended maximum spacing is 3-ft Mounting Hardware see page 605 Kwik-Clamps Kit of 10. See page 607 for hanger options Support/Hoisting Grip. Use at 200-ft (60m) intervals. Grip with one clamp Support clamp kit of 10 Standard Hoisting Grip L5SGRIP L5SGRIP-5IK 19256B L5CLICK

see pages 617-618 WeatherShield Connector Protection Housing VXL5 to LDF4 VXL5 to FSJ4 Cold Shrink Weatherproofing Kit 7/8" Coax to 7/8" Coax N Connectors 1-5/8" Coax to 7/8" Coax N Connectors 7/8" Coax to 1/4" Coax 7/8" Coax to 3/8" or 1/2" Coax 7/8" Coax to Antenna Type N or DIN interface 7/8" to APTL5 Arrestors Connector/Splice Weatherproofing Kit 241474-5 241475-3 241475-12 241475-9 241548-5 241474-5 221213 WS-L5L4 WS-L5F4

Standard Cable Entry Boots One Hole: Two Hole: Three Hole: 4" Boots 204679A-2 204679A-18 204679A-15 5" Boots 48939A-1 48939A-2

EASIAX Plus Automated Cable Prep Tool EASIAX Cutting Tool Cable Flaring Tool 7/8" Connector Torque Wrench DIN Connector Coupling Torque Wrench N Connector Coupling Torque Wrench CPTL5A 222951 224368 244378 244377 244379
505
LDF5-50A

Frequency MHz 0.5 1 1.5 2 10 20 30 50 88 100 108 150 174 200 300 400 450 500 512 600 700 800 824 894 960 1000 1250 1500 1700 1800 2000 2100 2200 2300 3000 3400 4000 5000 Attenuation dB/100 ft 0.025 0.035 0.043 0.050 0.112 0.159 0.195 0.254 0.340 0.364 0.378 0.449 0.486 0.523 0.649 0.758 0.808 0.855 0.866 0.945 1.03 1.11 1.13 1.18 1.23 1.25 1.42 1.58 1.70 1.75 1.86 1.92 1.97 2.02 2.37 2.55 2.81 3.23 Attenuation dB/100 m 0.081 0.115 0.141 0.163 0.366 0.521 0.641 0.833 1.12 1.19 1.24 1.47 1.59 1.72 2.13 2.49 2.65 2.81 2.84 3.10 3.37 3.63 3.69 3.87 4.02 4.12 4.67 5.18 5.56 5.75 6.11 6.29 6.46 6.63 7.76 8.37 9.23 10.6 Average Power, kW 91.0 78.6 64.1 55.5 24.6 17.3 14.1 10.8 8.08 7.56 7.26 6.12 5.66 5.26 4.24 3.63 3.41 3.22 3.17 2.91 2.67 2.48 2.44 2.34 2.24 2.19 1.93 1.74 1.62 1.57 1.48 1.44 1.40 1.36 1.16 1.08 0.978 0.853

Standard Cable 7/8" Standard Cable, Standard Jacket Fire Retardant Cable 7/8" Fire Retardant Jacket (CATVR) Low VSWR and Specialized Cables 7/8" Low VSWR, specify operating band LDF5-50A LDF5RN-50A LDF5P-50A-(**)
Characteristics
Electrical Impedance, ohms Maximum Frequency, GHz Velocity, percent Peak Power Rating, kW dc Resistance, ohms/1000 ft (1000 m) Inner Outer dc Breakdown, volts Jacket Spark, volts RMS Capacitance, pF/ft (m) Inductance, H/ft (m) Mechanical Outer Conductor Inner Conductor Diameter over Jacket, in (mm) Diameter over Copper Outer Conductor, in (mm) Diameter Inner Conductor, in (mm) Nominal Inside Transverse Dimensions, cm Minimum Bending Radius, in (mm) Number of Bends, minimum (typical) Bending Moment, lb-ft (Nm) Cable Weight, lb/ft (kg/m) Tensile Strength, lb (kg) Flat Plate Crush Strength, lb/in (kg/mm) 50 1 5.0 89 91 0.32 (1.05) 0.36 (1.18) 6000 8000 22.8 (75.0) 0.057 (0.187) Copper Copper 1.09 (28) 0.98 (24.9) 0.355 (9.0) 2.11 10 (250) 15 (50) 12 (16.3) 0.33 (0.49) 325 (147) 80 (1.4)
* A 75-ohm 7/8" diameter cable is available. Contact Andrew for further information.
506
7-16 DIN Female L5PDF-RPC
7-16 DIN Male L5PDM-RPC
N Male L5PNM-RPC
N Female L5PNF-RPC
7/8" EIA Flange L45R
F Flange Male L45F
Connectors
Interface N Male N Male N Female N Female 7-16 DIN Male 7-16 DIN Male 7-16 DIN Female 7-16 DIN Female 7-16 DIN Female 7-16 DIN Female 7-16 DIN Male 7/8" EIA Flange 7/8" EIA Flange F Flange Male F Flange Female Splice Description OnePiece RingFlare OnePiece RingFlare OnePiece RingFlare OnePiece RingFlare Panel Mount Bulkhead Right Angle Right Angle Type Number L5PNM-RPC L5PNM-RC L5PNF-RPC L5PNF-RC L5PDM-RPC L5PDM-RC L5PDF-RPC L5PDF-RC L5PDF-PM L5PDF-BH L5PDR L45R 124800-1 L45F 48041 L45Z Inner Contact Attachment Captivated Captivated Captivated Captivated Captivated Captivated Captivated Captivated Self-Tapping Self-Tapping Self-Tapping Self-Tapping Self-Tapping Self-Tapping Self-Tapping Self-Tapping Outer Contact Attachment Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare RingFlare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Plating Code SG SG SG SG SS SS SS SS SS SS SS BB BB BB BB BB Max. Length in (mm) 2.9 (74) 3.0 (76) 2.7 (69) 2.9 (74) 2.7 (69) 3.1 (79) 2.33 (59.1) 2.9 (74) 2.7 (69) 2.7 (69) 3.3/2.5 (85/64) 3.3 (84) 3.9/1.3 (99/33) 1.8 (46) 1.8 (46) 3.3 (84) Max. Dia. in (mm) 1.46 (37.2) 1.35 (34.3) 1.46 (37.2) 1.35 (34.3) 1.46 (37.2) 1.34 (34.0) 1.46 (37.2) 1.36 (34.5) 1.35 (34.4) 1.9 (48.3) 1.4 (35.6) 2.25 (57) 2.25 (57) 2.25 (57) 2.25 (57) 1.5 (38)
Connector Accessories See page 624
507

Type Number LDF5-50A LDF5RN-50A

Frequency Band, GHz 0.780-0.960 0.824-0.960 0.806-0.960 and 1.7-2.2 0.01-1.0* Type Number LDF5P-50A-10A LDF5P-50A-40 LDF5P-50A-42 LDF5P-50A-5A Using Connector Type* N 7-16 DIN N 7-16 DIN N 7-16 DIN N 7/8" EIA 7-16 DIN LC N 7/8" EIA 7-16 DIN F Flange N 7-16 DIN N Male N Female 7/8" EIA 7-16 DIN F Flange N Male N Female 7/8" EIA 7-16 DIN F Flange N Male N Female 7/8" EIA 7-16 DIN Male 7-16 DIN Female N Male N Female 7/8" EIA 7-16 DIN Male 7-16 DIN Female LC N 7/8" EIA 7-16 DIN Male 7-16 DIN Female 1-25 ft (0.3-8 m) 1.07 (29.4) 1.07 (29.4) 1.06 (30.7) 1.06 (30.7) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.08 (28.3) 1.12 (24.9) 1.08 (28.3) 1.08 (28.3) 1.08 (28.3) 1.10 (26.4) 1.15 (23.1) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.15 (23.1) 1.15 (23.1) 1.10 (26.4) 1.15 (23.1) 1.10 (26.4) 1.15 (23.1) 1.15 (23.1) 1.10 (26.4) 1.15 (23.1) 1.25 (19.1) 1.15 (23.1) 1.30 (17.7) 1.15 (23.1) 1.30 (17.7) Assembly VSWR, Maximum (R.L., dB) 25-100 ft 100-200 ft 200-500 ft (8-30 m) (30-60 m) (60-150 m) 1.07 (29.4) 1.07 (29.4) 1.07 (29.4) 1.07 (29.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4)) 1.10 (26.4) 1.08 (28.3) 1.12 (24.9) 1.08 (28.3) 1.08 (28.3) 1.08 (28.3) 1.10 (26.4) 1.15 (23.1) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.15 (23.1) 1.20 (20.8) 1.20 (20.8) 1.15 (23.1) 1.20 (20.8) 1.20 (20.8) 1.20 (20.8) 1.20 (20.8) 1.20 (20.8) 1.20 (20.8) 1.30 (17.7) 1.20 (20.8) 1.30 (17.7) 1.20 (20.8) 1.30 (17.7) 1.08 (28.3) 1.08 (28.3) 1.08 (28.3) 1.08 (28.3) 1.10 (26.4) 1.10 (26.4) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.12 (24.9) 1.12 (24.9) 1.12 (24.9) 1.12 (24.9) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.12 (24.9) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.12 (24.9) 1.15 (23.1) 1.12 (24.9) 1.12 (24.9) 1.12 (24.9) 1.20 (20.8) 1.20 (20.8) 1.20 (20.8) 1.20 (20.8) 1.20 (20.8) 1.30 (17.7) 1.30 (17.7) 1.30 (17.7) 1.30 (17.7) 1.30 (17.7) 1.30 (17.7) 1.35 (16.5) 1.35 (16.5) 1.35 (16.5) 1.35 (16.5) 1.10 (26.4) 1.10 (26.4) 1.09 (27.3) 1.09 (27.3) 1.10 (26.4) 1.10 (26.4) 1.20 (20.8) 1.20 (20.8) 1.20 (20.8) 1.20 (20.8) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.12 (24.9) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.15 (23.1) 1.18 (21.6) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.20 (20.8) 1.25 (19.1) 1.25 (19.1) 1.20 (20.8) 1.25 (19.1) 1.35 (16.5) 1.35 (16.5) 1.35 (16.5) 1.35 (16.5) 1.35 (16.5) 1.35 (16.5) 1.35 (16.5) 1.35 (16.5) 1.35 (16.5) 1.35 (16.5) Above 500 ft (150 m) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.30 (17.7) 1.30 (17.7) 1.30 (17.7) 1.30 (17.7) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.12 (24.9) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.15 (23.1) 1.18 (21.6) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.20 (20.8) 1.25 (19.1) 1.25 (19.1) 1.20 (20.8) 1.25 (19.1) 1.35 (16.5) 1.35 (16.5) 1.35 (16.5) 1.35 (16.5) 1.35 (16.5) 1.35 (16.5) 1.35 (16.5) 1.35 (16.5) 1.35 (16.5) 1.35 (16.5)
1.38-1.540
LDF5P-50A-11A
1.7-2.2 1.60-2.3
LDF5P-50A-41 LDF5P-50A-12A
2.3-2.7
LDF5P-50A-13A
1.7-4.2
LDF5P-50A-7A
0.01-4.2*
LDF5P-50A-14A
0.01-5.0*
LDF5P-50A-15A
508
Revised 9/00 & 3/01
Accessories

see pages 599-607 Standard Hangers Kit of 10. Recommended maximum spacing is 3-ft (1 m). For different spacing recommendations, refer to Cable Hanger Spacing, page 593-598 42396A-5 Hardware Kit of 10. 3/8" bolts, lockwashers, nuts 3/4" (19mm) long 1" (25mm) long 31769-5 31769-1

see pages 617-618 WeatherShield Connector Protection Housing LDF5 to LDF4 LDF5 to FSJ4 Cold Shrink Weatherproofing Kit 7/8" Coax to 7/8" Coax N Connectors 1-5/8" Coax to 7/8" Coax N Connectors 7/8" Coax to 1/4" Coax 7/8" Coax to 3/8" or 1/2" Coax 7/8" Coax to Antenna Type N or DIN interface 7/8" to APTL5 Arrestors Connector/Splice Weatherproofing Kit 241474-5 241475-3 241475-12 241475-9 241548-5 241474-5 221213 WS-L5L4 WS-L5F4
Snap-In Hangers Kit of 10. For prepunched 3/4" (19 mm) holes on tower member or adapters. Recommended maximum spacing is 3-ft. For different spacing recommendations, refer to Cable Hanger Spacing, page 593-598 206706A-2 Click-On Hangers Kit of 10. Recommended maximum spacing is 3-ft Mounting Hardware see page 605 Kwik-Clamps Kit of 10. See page 607 for hanger options Support/Hoisting Grip. Use at 200-ft (60m) intervals. Grip with one clamp Support clamp kit of 10 Standard Hoisting Grip L5SGRIP L5SGRIP-5IK 19256B L5CLICK

Tools for additional tool offerings see pages 620-623 Grounding and Surge Protection for additional grounding
kits and our surge protection offerings, see pages 609-616 SureGround Grounding Kit with standard weatherproofing Factory attached one-hole lug, 600 mm (24") lead Factory attached two-hole lug, 600 mm (24") lead Field attached two-hole lug, 1500 mm (59") lead Factory attached one-hole lug, 600 mm (24") lead Factory attached two-hole lug, 600 mm (24") lead Field attached two-hole lug, 1500 mm (59") lead SGL5-06B1 SGL5-06B2 SGL5-15B4 SGPL5-06B1 SGPL5-06B2 SGPL5-15B4 EASIAX Plus Automated Cable Prep Tool EASIAX Cutting Tool Cable Flaring Tool 7/8" Connector Torque Wrench DIN Connector Coupling Torque Wrench N Connector Coupling Torque Wrench CPTL5A 222951 224368 244378 244377 244379
Arrestor Plus Integrated T-Series Arrestors see page 614 Bulkhead N Female APTL5-BNF-(*) Bulkhead 7-16 DIN Female APTL5-BDF-(*)
*Frequency band. See page 614.
509
1-1/4" Flexible Feeder, Foam Dielectric VXL Series - 50-ohm
VXL6-50

Frequency MHz 0.5 1 1.5 2 10 20 30 50 88 100 108 150 174 200 300 400 450 500 512 600 700 800 824 894 960 1000 1250 1500 1700 1800 2000 2100 2200 2300 3000 3300 Attenuation dB/100 ft 0.018 0.026 0.032 0.037 0.083 0.119 0.146 0.190 0.256 0.274 0.285 0.340 0.368 0.397 0.495 0.580 0.619 0.657 0.666 0.728 0.795 0.858 0.872 0.914 0.953 0.976 1.11 1.24 1.34 1.38 1.47 1.52 1.56 1.61 1.89 2.01 Attenuation dB/100 m 0.060 0.085 0.104 0.121 0.273 0.389 0.479 0.625 0.840 0.899 0.936 1.12 1.21 1.30 1.62 1.90 2.03 2.15 2.18 2.39 2.61 2.81 2.86 3.00 3.13 3.20 3.65 4.07 4.38 4.54 4.83 4.98 5.12 5.27 6.21 6.59 Average Power kW 154.35 108.94 88.83 76.84 34.00 23.85 19.36 14.86 11.05 10.33 9.9 8.32 7.69 7.13 5.72 4.88 4.57 4.31 4.25 3.89 3.56 3.30 3.25 3.10 2.97 2.90 2.55 2.29 2.12 2.05 1.92 1.87 1.81 1.76 1.50 1.41

Standard Cable 1-1/4" Standard Cable, Standard Jacket Fire Retardant Cable 1-1/4" Fire Retardant Jacket (CATVR) Low VSWR and Specialized Cables 1-1/4" Low VSWR, specify operating band VXL6P-50-(**) VXL6RN-50 VXL6-50
Characteristics
Electrical Impedance, ohms Maximum Frequency, GHz Velocity, percent Peak Power Rating, kW dc Resistance, ohms/1000 ft (1000 m) Inner Outer dc Breakdown, volts Jacket Spark, volts RMS Capacitance, pF/ft (m) Inductance, H/ft (m) Mechanical Outer Conductor Inner Conductor Diameter over Jacket, in (mm) Diameter over Copper Outer Conductor, in (mm) Diameter Inner Conductor, in (mm) Minimum Bending Radius, in (mm) Number of Bends, minimum (typical) Bending Moment, lb-ft (Nm) Cable Weight, lb/ft (kg/m) Tensile Strength, lb (kg) Flat Plate Crush Strength, lb/in (kg/mm) Copper Copper Tube 1.55 (39.4) 1.41 (35.8) 0.536 (13.6) 8 (200) 15 (50) 22 (30.4) 0.5 (0.74) 400 (181) 75 (1.3) 50 1 3.3 88 180 0.54 (1.77) 0.25 (0.82) 8500 10000 22.6 (74.2) 0.05 (0.194)
Standard Conditions: For Attenuation. VSWR 1.0 ambient temperature 20C (68F).For Average Power, VSWR 1.0, ambient temperature 40C (104F), inner conductor temperature 100C (212F), no solar loading.
510
Revised 9/00
N Male V6PNM-RPC
N Female V6PNF-RPC
Connectors
Interface N Male N Female 7-16 DIN Male 7-16 DIN Female Description OnePiece OnePiece OnePiece OnePiece Type Number V6PNM-RPC V6PNF-RPC V6PDM-RPC V6PDF-RPC Inner Contact Attachment Captivated Captivated Captivated Captivated Outer Contact Attachment Self-Flare Self-Flare Self-Flare Self-Flare Plating Code SG SG SS SS Max.Length in (mm) 3.3 (84) 4.0 (102) 3.6 (91) 3.5 (89) Max.Dia. in (mm) 2.03 (51.6) 2.03 (51.6) 2.03 (51.6) 2.03 (51.6)
Plating Codes: SG - Silver Plated Body and Gold Plated Pin. SS - Silver Plated Body and Pin.
Connector Accessories - See page 624

Frequency Band, GHz 0.806-0.960 and 1.7-2.0 1-25 ft (3-8 m) 1.10 (26.4)* 1.10 (26.4)* Assembly VSWR, Maximum (R.L., dB) 25-100 ft 100-200 ft 200-500 ft (8-30 m) (30-60 m) (60-150m) 1.11 (25.7)* 1.11 (25.7)* 1.12 (24.9)* 1.12 (24.9)* 1.13 (24.3)* 1.13 (24.3)* Above 500 ft (150 m) 1.13 (24.3)** 1.13 (24.3)**
Type No. VXL6-50 VXL6RN-50

Frequency Band, GHz 0.806-0.960 0.806-0.960 and 1.7-2.2 1.7-2.2 1 to 25 ft (0.3-8 m) 1.08 (28.3) 1.08 (28.3) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) Assembly VSWR, Maximum (R.L., dB) 25-100 ft 100-200 ft 200-500 ft (8-30 m) (30-60 m) (60-150 m) 1.08 (28.3) 1.08 (28.3) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.08 (28.3) 1.08 (28.3) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.09 (27.3) 1.09 (27.3) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) Above 500 ft (150 m) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4)
Type No. VXL6P-50-40 VXL6P-50-42 VXL6P-50-41
Using Connector Type* N 7-16 DIN N 7-16 DIN N 7-16 DIN
* Connectors ordered separately. VSWR values apply to straight connectors only, are guaranteed for factory fit assemblies, and are typical for field cut lengths. If two different connector interfaces are selected, the higher VSWR value is guaranteed.
511
Accessories

see pages 599-607 Standard Hangers Kit of 10. Standard tower configuration spacing is 3-4 feet (1-1.2 m). For different spacing recommendations, refer to Cable Hanger Spacing, page 593-598 42396A-1 Hardware Kit of 10. 3/8" bolts, lockwashers, nuts 3/4" (19mm) long 1" (25mm) long 31769-5 31769-1

see pages 617-618 WeatherShield Connector Protection Housing VXL6 to LDF4 VXL6 to FSJ4 Cold Shrink Weatherproofing Kit 1-1/4" Coax to 1-1/4" Coax N Connectors 1-1/4" Coax to 1/4" Coax 1-1/4" Coax to 3/8" or 1/2" Coax 1-1/4" to APTL6 Arrestors Connector/Splice Weatherproofing Kit 241474-6 241475-11 241475-5A 241474-6 221213 WS-L6L4 WS-L6F4

Standard Cable Entry Boots One Hole: 4" Boots 204679A-3 5" Boots 48939A-2

EASIAX Plus Automated Cable Prep Tool 1-1/4" Connector Torque Wrench DIN Connector Coupling Torque Wrench N Connector Coupling Torque Wrench CPTL6 244375 244377 244379

512
1-1/4" Foam Dielectric, LDF Series 50-ohm
LDF6-50

Frequency MHz 0.5 1 1.5 2 10 20 30 50 88 100 108 150 174 200 300 400 450 500 512 600 700 800 824 894 960 1000 1250 1500 1700 1800 2000 2100 2200 2300 3000 3300 Attenuation dB/100 ft 0.017 0.024 0.030 0.034 0.077 0.110 0.135 0.176 0.237 0.254 0.264 0.314 0.340 0.367 0.457 0.535 0.571 0.606 0.614 0.671 0.732 0.789 0.803 0.841 0.876 0.897 1.02 1.14 1.22 1.27 1.35 1.39 1.43 1.47 1.73 1.84 Attenuation dB/100 m 0.056 0.079 0.097 0.112 0.253 0.361 0.444 0.579 0.778 0.832 0.867 1.03 1.12 1.20 1.50 1.76 1.87 1.99 2.01 2.20 2.40 2.59 2.63 2.76 2.87 2.94 3.35 3.73 4.02 4.16 4.43 4.56 4.69 4.82 5.68 6.02 Average Power, kW 175.0 123.0 101.0 87.1 38.6 27.1 22.0 16.9 12.6 11.7 11.3 9.47 8.75 8.12 6.52 5.57 5.22 4.92 4.86 4.44 4.07 3.78 3.71 3.54 3.40 3.32 2.92 2.62 2.43 2.35 2.21 2.14 2.08 2.03 1.72 1.62

Standard Cable 1-1/4" Standard Cable, Standard Jacket Fire Retardant Cable 1-1/4" Fire Retardant Jacket (CATVR) Low VSWR and Specialized Cables 1-1/4" Low VSWR, specify operating band LDF6-50 LDF6RN-50 LDF6P-50-(**)
Characteristics
Electrical Impedance, ohms Maximum Frequency, GHz Velocity, percent Peak Power Rating, kW dc Resistance, ohms/1000 ft (1000 m) Inner Outer dc Breakdown, volts Jacket Spark, volts RMS Capacitance, pF/ft (m) Inductance, H/ft (m) Mechanical Outer Conductor Inner Conductor Diameter over Jacket, in (mm) Diameter over Copper Outer Conductor, in (mm) Diameter Inner Conductor, in (mm) Nominal Inside Transverse Dimensions, cm Minimum Bending Radius, in (mm) Number of Bends, minimum (typical) Bending Moment, lb-ft (Nm) Cable Weight, lb/ft (kg/m) Tensile Strength, lb (kg) Flat Plate Crush Strength, lb/in (kg/mm) 50 1 3.3 89 205 0.22 (0.72) 0.19 (0.62) 9000 10000 22.9 (75.1) 0.056 (0.184) Copper Copper 1.55 (39.4) 1.41 (35.8) 0.516 (13.1) 3.11 15 (380) 15 (40) 36 (49) 0.63 (0.94) 1300 (590) 125 (2.2)
513
N Male L6PNM-RPC
N Female L6PNF-RPC
1-5/8" EIA Flange L46R
7/8" EIA Flange L46S
F Flange Male L46F
Connectors
Interface N Male N Female N Female 7-16 DIN Male 7-16 DIN Female 7-16 DIN Female 7-16 DIN Female 7/8" EIA Flange 1-5/8" EIA Flange F Flange Male Splice Description OnePiece OnePiece RingFlare OnePiece OnePiece Bulkhead RingFlare Type Number L6PNM-RPC L6PNF-RPC L6PNF-RC L6PDM-RPC L6PDF-RPC L6PDF-BH L6PDF-RC L46S L46R L46F L46Z Inner Contact Attachment Captivated Captivated Captivated Captivated Captivated Self-Tapping Captivated Self-Tapping Self-Tapping Self-Tapping Self-Tapping Outer Contact Attachment Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Plating Code SG SG SG SS SS SS SS BB BB BB BB Max. Length in (mm) 3.8 (96) 3.1 (79) 3.4 (86) 3.4 (86) 3.4 (86) 4.1 (104) 3.2 (81) 4.6 (117) 5.1 (130) 4.0 (102) 3.0 (76) Max. Dia. in (mm) 2.03 (51.6) 2.03 (51.6) 2.0 (50.8) 2.03 (51.6) 2.03 (51.6) 2.0 (50.8) 2.0 (50.8) 2.25 (57) 3.5 (89) 2.25 (57) 2.0 (50.8)
Connector Accessories See page 624 Factory Attached Connectors For factory made cable assemblies and jumper cables, see pages 584-587. Standard VSWR Specifications
Frequency Band, GHz 0.806-0.960 and 1.7-2.0 1-25 ft (0.3-8 m) 1.10 (26.4)* 1.10 (26.4)* Assembly VSWR, Maximum (R.L., dB) 25-100 ft 100-200 ft 200-500 ft (8-30 m) (30-60 m) (60-150m) 1.11 (25.7)* 1.11 (25.7)* 1.12 (24.97)* 1.12 (24.97)* 1.13 (24.3)* 1.13 (24.3)* Above 500 ft (150 m) 1.13 (24.3)** 1.13 (24.3)**
Type Number LDF6-50 LDF6RN-50
514
Revised 7/00

Frequency Band, GHz 0.806-0.960 0.8060.960 and 1.72.2 1.427-1.535 Type Number LDF6P-50-40 LDF6P-50-42 LDF6P-50-4A Using Connector Type* N 7-16 DIN N 7-16 DIN 7/8" EIA N Male F Flange 7-16 DIN Male 7-16 DIN Female N Female LC Male LC Female 1-5/8" EIA N 7-16 DIN 7/8" EIA N Male F Flange 7-16 DIN Male 7-16 DIN Female N Female LC 1-5/8" EIA 7/8" EIA N Male F Flange 7-16 DIN Male 7-16 DIN Female N Female: L6PNF LC 1-5/8" EIA 7/8" EIA N Male F Flange 7-16 DIN Male 7-16 DIN Female N Female LC Male LC Female 1-5/8" EIA 7/8" EIA N Male F Flange 7-16 DIN Male 7-16 DIN Female N Female LC Female LC Male 1-5/8" EIA 7/8" EIA N F Flange 7-16 DIN LC Female LC Male 1-5/8" EIA 7/8" EIA N Male F Flange 7-16 DIN N Female LC 1-25 ft (0.3-8 m) 1.07 (29.4) 1.07 (29.4) 1.10 (26.4) 1.10 (26.4) 1.06 (30.7) 1.08 (28.3) 1.10 (26.4) 1.10 (26.4) 1.08 (28.3) 1.10 (26.4) 1.20 (20.8) 1.20 (20.8) 1.10 (26.4) 1.09 (27.3) 1.09 (27.3) 1.06 (30.7) 1.08 (28.3) 1.10 (26.4) 1.10 (26.4) 1.08 (28.3) 1.10 (26.4) 1.20 (20.8) 1.10 (26.4) 1.06 (30.7) 1.06 (30.7) 1.08 (28.3) 1.08 (28.3) 1.06 (30.7) 1.08 (28.3) 1.20 (20.8) 1.10 (26.4) 1.08 (28.3) 1.08 (28.3) 1.10 (26.4) 1.12 (24.9) 1.08 (28.3) 1.12 (24.9) 1.20 (20.8) 1.20 (20.8) 1.20 (20.8) 1.08 (28.3) 1.08 (28.3) 1.10 (26.4) 1.10 (26.4) 1.08 (28.3) 1.10 (26.4) 1.30 (17.7) 1.20 (20.8) 1.20 (20.8) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.30 (17.7) 1.20 (20.8) 1.20 (20.8) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.30 (17.7) Assembly VSWR, Maximum (R.L., dB) 25-100 ft 100-200 ft 200-500 ft (8-30 m) (30-60 m) (60-150 m) 1.08 (28.3) 1.08 (28.3) 1.10 (26.4) 1.10 (26.4) 1.08 (28.3) 1.10 (26.4) 1.12 (24.9) 1.15 (23.1) 1.10 (26.4) 1.12 (24.9) 1.25 (19.1) 1.25 (19.1) 1.15 (23.1) 1.09 (27.3) 1.09 (27.3) 1.08 (28.3) 1.10 (26.4) 1.12 (24.9) 1.12 (24.9) 1.10 (26.4) 1.12 (24.9) 1.22 (20.1) 1.15 (23.1) 1.08 (28.3) 1.08 (28.3) 1.10 (26.4) 1.10 (26.4) 1.08 (28.3) 1.10 (26.4) 1.22 (20.1) 1.12 (24.9) 1.10 (26.4) 1.10 (26.4) 1.12 (24.9) 1.22 (20.1) 1.10 (26.4) 1.15 (23.1) 1.22 (20.1) 1.25 (19.1) 1.22 (20.1) 1.10 (26.4) 1.10 (26.4) 1.12 (24.9) 1.12 (24.9) 1.10 (26.4) 1.12 (24.9) 1.30 (17.7) 1.22 (20.1) 1.20 (20.8) 1.20 (20.8) 1.20 (20.8) 1.20 (20.8) 1.20 (20.8) 1.35 (16.6) 1.25 (19.1) 1.30 (17.7) 1.20 (20.8) 1.20 (20.8) 1.20 (20.8) 1.20 (20.8) 1.20 (20.8) 1.40 (15.6) 1.08 (28.3) 1.08 (28.3) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.12 (24.9) 1.15 (23.1) 1.20 (20.8) 1.12 (24.9) 1.15 (23.1) 1.28 (18.2) 1.30 (17.7) 1.20 (20.8) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.12 (24.9) 1.15 (23.1) 1.15 (23.1) 1.12 (24.9) 1.15 (23.1) 1.24 (19.3) 1.18 (21.6) 1.10 (26.4) 1.10 (26.4) 1.12 (24.9) 1.12 (24.9) 1.10 (26.4) 1.12 (24.9) 1.24 (19.3) 1.14 (23.7) 1.12 (24.9) 1.12 (24.9) 1.15 (23.1) 1.24 (19.3) 1.12 (24.9) 1.18 (21.6) 1.25 (19.1) 1.28 (18.2) 1.24 (19.4) 1.12 (24.9) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.12 (24.9) 1.15 (23.1) 1.32 (17.2) 1.25 (19.1) 1.22 (20.1) 1.35 (16.6) 1.35 (16.6) 1.35 (16.6) 1.35 (16.6) 1.40 (15.6) 1.35 (16.6) 1.35 (16.6) 1.35 (16.6) 1.35 (16.6) 1.35 (16.6) 1.35 (16.6) 1.35 (16.6) 1.50 (14.0) 1.09 (27.3) 1.09 (27.3) 1.10 (26.4) 1.10 (26.4) 1.17 (22.1) 1.15 (23.1) 1.20 (20.8) 1.20 (20.8) 1.15 (23.1) 1.20 (20.8) 1.30 (17.7) 1.30 (17.7) 1.20 (20.8) 1.10 (26.4) 1.10 (26.4) 1.12 (24.9) 1.15 (23.1) 1.18 (21.6) 1.18 (21.6) 1.15 (23.1) 1.18 (21.6) 1.25 (19.1) 1.20 (20.8) 1.12 (24.9) 1.12 (24.9) 1.15 (23.1) 1.15 (23.1) 1.12 (24.9) 1.15 (23.1) 1.25 (19.1) 1.18 (21.6) 1.15 (23.1) 1.15 (23.1) 1.18 (21.6) 1.25 (19.1) 1.15 (23.1) 1.25 (19.1) 1.28 (18.2) 1.30 (17.7) 1.25 (19.1) 1.15 (23.1) 1.18 (21.6) 1.20 (20.8) 1.20 (20.8) 1.15 (23.1) 1.20 (20.8) 1.35 (16.6) 1.28 (18.2) 1.25 (19.1) 2.10 (9.0) 2.10 (9.0) 2.10 (9.0) 1.80 (10.9) 1.80 (10.9) 1.80 (10.9) 1.80 (10.9) 1.80 (10.9) 2.10 (9.0) 1.80 (10.9) 1.80 (10.9) 2.10 (9.0) 1.80 (10.9) Above 500 ft (150 m) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.20 (20.8) 1.15 (23.1) 1.25 (19.1) 1.25 (19.1) 1.20 (20.8) 1.25 (19.1) 1.30 (17.7) 1.30 (17.7) 1.25 (19.1) 1.10 (26.4) 1.10 (26.4) 1.15 (23.1) 1.15 (23.1) 1.20 (20.8) 1.20 (20.8) 1.15 (23.1) 1.20 (20.8) 1.25 (19.1) 1.20 (20.8) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.25 (19.1) 1.20 (20.8)* 1.20 (20.8) 1.15 (23.1) 1.20 (20.8) 1.25 (19.1) 1.20 (20.8) 1.25 (19.1) 1.30 (17.7) 1.35 (16.6) 1.25 (19.1) 1.20 (20.8) 1.20 (20.8) 1.25 (19.1) 1.25 (19.1) 1.20 (20.8) 1.25 (19.1) 1.35 (16.6) 1.30 (17.7) 1.25 (19.1) 2.10 (9.0) 2.10 (9.0) 2.10 (9.0) 2.10 (9.0) 2.10 (9.0) 2.10 (9.0) 2.10 (9.0) 2.10 (9.0) 2.10 (9.0) 2.10 (9.0) 2.10 (9.0) 2.10 (9.0) 2.10 (9.0)
1.7-2.2 1.7-2.11
LDF6P-50-41 LDF6P-50-6A
1.85-2.2
LDF6P-50-7A
1.9-2.3
LDF6P-50-8A
2.3-2.7
LDF6P-50-9A
0.010-2.7*
LDF6P-50-10A
0.010-3.3*
LDF6P-50-11A
515
Accessories


see pages 617-618 WeatherShield Connector Protection Housing LDF6 to LDF4 LDF6 to FSJ4 Cold Shrink Weatherproofing Kit 1-1/4" Coax to 1-1/4" Coax N Connectors 1-1/4" Coax to 1/4" Coax 1-1/4" Coax to 3/8" or 1/2" Coax 1-1/4" to APTL6 Arrestors Connector/Splice Weatherproofing Kit 241474-6 241475-11 241475-5A 241474-6 221213 WS-L6L4 WS-L6F4



* Frequency band. See page 614
516
1-5/8" Flexible Feeder, Foam Dielectric VXL Series - 50-ohm
VXL7-50
Frequency MHz 0.5 1 1.5 2 10 20 30 50 88 100 108 150 174 200 300 400 450 500 512 600 700 800 824 894 960 1000 1250 1500 1700 2000 2300 2500
Attenuation dB/100 ft 0.014 0.019 0.024 0.027 0.062 0.088 0.109 0.142 0.191 0.205 0.213 0.254 0.276 0.297 0.372 0.437 0.467 0.496 0.503 0.550 0.602 0.650 0.662 0.694 0.724 0.742 0.848 0.947 1.02 1.13 1.23 1.30
Attenuation dB/100 m 0.044 0.063 0.077 0.089 0.202 0.289 0.356 0.465 0.627 0.671 0.699 0.834 0.904 0.976 1.22 1.43 1.53 1.63 1.65 1.81 1.97 2.13 2.17 2.28 2.38 2.43 2.78 3.11 3.35 3.71 4.05 4.27
Average Power, kW 247.0 175.0 142.0 123.0 54.3 38.1 30.9 23.6 17.5 16.4 15.7 13.2 12.2 11.3 9.01 7.67 7.18 6.76 6.67 6.09 5.57 5.15 5.06 4.83 4.63 4.52 3.95 3.54 3.28 2.96 2.72 2.58

Standard Cable 1-5/8" Standard Cable, Standard Jacket Fire Retardant Cable 1-5/8" Fire Retardant Jacket (CATVR) Low VSWR and Specialized Cables 1-5/8" Low VSWR, specify operating band VXL7P-50-(**) VXL7RN-50 VXL7-50
Characteristics
Electrical Impedance, ohms Maximum Frequency, GHz Velocity, percent Peak Power Rating, kW dc Resistance, ohms/1000 ft (1000 m) Inner Outer dc Breakdown, volts Jacket Spark, volts RMS Capacitance, pF/ft (m) Inductance, H/ft (m) Mechanical Outer Conductor Inner Conductor Diameter over Jacket, in (mm) Diameter over Copper Outer Conductor, in (mm) Diameter Inner Conductor, in (mm) Minimum Bending Radius, in (mm) Number of Bends, minimum (typical) Bending Moment, lb-ft (Nm) Cable Weight, lb/ft (kg/m) Tensile Strength, lb (kg) Flat Plate Crush Strength, lb/in (kg/mm) Copper Copper Tube 1.98 (50) 1.825 (46.3) 0.688 (17.5) 15 (375) 15 (50) 35 (48.4) 0.75 (1.12) 550 (249) 110 (2.0) 50 1 2.5 88 275 0.42 (1.39) 0.16 (0.52) 10500 10000 22.5 (73.8) 0.05 (0.194)
Standard Conditions: For Attenuation. VSWR 1.0 ambient temperature 20C (68F).For Average Power, VSWR 1.0, ambient temperature 40C (104F), inner conductor temperature 100C (212F), no solar loading.
517
N Male V7PNM-RPC
N Female V7PNF-RPC
Connectors
Interface N Male N Female 7-16 DIN Male 7-16 DIN Female Description OnePiece OnePiece OnePiece OnePiece Type Number V7PNM-RPC V7PNF-RPC V7PDM-RPC V7PDF-RPC Inner Contact Attachment Captivated Captivated Captivated Captivated Outer Contact Attachment Self-Flare Self-Flare Self-Flare Self-Flare Plating Code SG SG SS SS Max.Length in (mm) 4.6 (117) 4.7 (119) 4.3 (109) 4.3 (109) Max.Dia. in (mm) 2.47 (62.7) 2.47 (62.7) 2.46 (62.5) 2.46 (62.5)
Plating Codes: SG - Silver Plated Body and Gold Plated Pin. SS - Silver Plated Body and Pin.
Connector Accessories - See page 624

Frequency Band, GHz 0.806-0.960 and 1.7-2.0 1-25 ft (3-8 m) 1.10 (26.4)* 1.10 (26.4)* Assembly VSWR, Maximum (R.L., dB) 25-100 ft 100-200 ft 200-500 ft (8-30 m) (30-60 m) (60-150 m) 1.10 (26.4)* 1.10 (26.4)* 1.12 (24.9)* 1.12 (24.9)* 1.13 (24.3)* 1.13 (24.3)* Above 500 ft (150 m) 1.13 (24.3)** 1.13 (24.3)**
Type No. VXL7-50 VXL7RN-50

Frequency Band, GHz 0.806-0.960 0.806-0.960 and 1.7-2.2 1.7-2.2 1 to 25 ft (0.3-8 m) 1.07 (29.4) 1.07 (29.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) Assembly VSWR, Maximum (R.L., dB) 25-100 ft 100-200 ft 200-500 ft (8-30 m) (30-60 m) (60-150 m) 1.08 (28.3) 1.08 (28.3) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.08 (28.3) 1.08 (28.3) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.09 (27.3) 1.09 (27.3) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) Above 500 ft (150 m) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4)
Type No. VXL7P-50-40 VXL7P-50-42 VXL7P-50-41
Using Connector Type* N 7-16 DIN N 7-16 DIN N 7-16 DIN
* Connectors ordered separately. VSWR values apply to straight connectors only, are guaranteed for factory fit assemblies, and are typical for field cut lengths. If two different connector interfaces are selected, the higher VSWR value is guaranteed.
518
Revised 7/00 & 3/01
Accessories


see pages 617-618 WeatherShield Connector Protection Housing VXL7 to LDF4 VXL7 to FSJ4 Cold Shrink Weatherproofing Kit 1-5/8" Coax to 1-1/4" Coax N Connectors 1-5/8" Coax to 1/4" Coax 1-5/8" Coax to 3/8" or 1/2" Coax 1-5/8" to APTL7 Arrestors Connector/Splice Weatherproofing Kit 241474-6 241475-11 241475-5A 241474-6 221213 WS-L7L4 WS-L7F4
Snap-In Hangers Kit of 10. For prepunched 3/4" (19mm) holes on tower member or adapters, Recommended maximum spacing is 3-ft. For different spacing recommendations, refer to Cable Hanger Spacing, page 593-598 206706-4 Click-On Hangers Kit of 10. Recommended maximum spacing is 3-ft Mounting Hardware see page 605 Kwik-Clamps Kit of 10. See page 607 for hanger options Support/Hoisting Grip. Use at 200-ft (60m) intervals. Grip with one clamp Support clamp kit of 10 Standard Hoisting Grip L7SGRIP L7SGRIP-7IK 24312A L7CLICK



519
LDF7-50A

Frequency MHz 0.5 1 1.5 2 10 20 30 50 88 100 108 150 174 200 300 400 450 500 512 600 700 800 824 894 960 1000 1250 1500 1700 2000 2300 2500 Attenuation dB/100 ft 0.014 0.019 0.024 0.027 0.062 0.088 0.109 0.142 0.191 0.205 0.213 0.254 0.276 0.297 0.372 0.437 0.467 0.496 0.503 0.550 0.602 0.650 0.662 0.694 0.724 0.742 0.848 0.947 1.02 1.13 1.23 1.30 Attenuation dB/100 m 0.044 0.063 0.077 0.089 0.202 0.289 0.356 0.465 0.627 0.671 0.699 0.834 0.904 0.976 1.22 1.43 1.53 1.63 1.65 1.81 1.97 2.13 2.17 2.28 2.38 2.43 2.78 3.11 3.35 3.71 4.05 4.27 Average Power, kW 247.0 175.0 142.0 123.0 54.3 38.1 30.9 23.6 17.5 16.4 15.7 13.2 12.2 11.3 9.01 7.67 7.18 6.76 6.67 6.09 5.57 5.15 5.06 4.83 4.63 4.52 3.95 3.54 3.28 2.96 2.72 2.58

Standard Cable 1-5/8" Standard Cable, Standard Jacket Fire Retardant Cable 1-5/8" Fire Retardant Jacket (CATVR) Low VSWR and Specialized Cables 1-5/8" Low VSWR, specify operating band LDF7-50A LDF7RN-50A LDF7P-50A-(**)
Characteristics
Electrical Impedance, ohms Maximum Frequency, GHz Velocity, percent Peak Power Rating, kW dc Resistance, ohms/1000 ft (1000 m) Inner Outer dc Breakdown, volts Jacket Spark, volts RMS Capacitance, pF/ft (m) Inductance, H/ft (m) Mechanical Outer Conductor Inner Conductor Diameter over Jacket, in (mm) Diameter over Copper Outer Conductor, in (mm) Diameter Inner Conductor, in (mm) Nominal Inside Transverse Dimensions, cm Minimum Bending Radius, in (mm) Number of Bends, minimum (typical) Bending Moment, lb-ft (Nm) Cable Weight, lb/ft (kg/m) Tensile Strength, lb (kg) Flat Plate Crush Strength, lb/in (kg/mm) 50 1 2.5 88 315 0.25 (0.83) 0.16 (0.52) 11000 10000 23.1 (75.8) 0.058 (0.190) Copper Copper Tube 1.98 (50) 1.825 (46.3) 0.681 (17.3) 4.05 20 (510) 15 (50) 40 (54.2) 0.82 (1.2) 800 (363) 120 (2.1)
Standard Conditons: For Attenuation, VSWR 1.0, ambient temperature 20C (68F), atmospheric pressure, dry air. For Average Power, VSWR 1.0, inner temperature 100C (212F), ambient temperature 40C (104F), atmospheric pressure, dry air, no solar loading.
520
N Male L7PNM-RPC
N Female L7PNF-RPC
1-5/8" EIA Flange L47R
7/8" EIA Flange L47S
F Flange Male L47F
Connectors
Interface N Male N Female N Female 7-16 DIN Male 7-16 DIN Female 7-16 DIN Female 7/8" EIA Flange 1-5/8" EIA Flange F Flange Flange Male F Flange Flange Female Splice Description OnePiece OnePiece RingFlare OnePiece OnePiece RingFlare Type Number L7PNM-RPC L7PNF-RPC L7PNF-RC L7PDM-RPC L7PDF-RPC L7PDF-RC L47S L47R L47F 201942 L47Z Inner Contact Attachment Captivated Captivated Captivated Captivated Captivated Captivated Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Outer Contact Attachment Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Plating Code SS SG SG SS SS SS BB BB BB BB BB Max. Length in (mm) 4.4 (112) 4.5 (114) 4.2 (107) 4.2 (107) 4.1 (104) 3.4 (86) 5.1 (130) 5.1 (130) 5.9 (150) 5.5 (140) 5.1 (130) Max. Dia. in (mm) 2.47 (62.7) 2.47 (62.7) 2.36 (59.9) 2.46 (62.5) 2.45 (62.2) 2.36 (59.9) 2.25 (57) 3.5 (89) 2.25 (57) 2.25 (57) 2.9 (74)
Connector Accessories See page 624 Factory Attached Connectors For factory made cable assemblies and jumper cables, see pages 584-587. Standard VSWR Specifications
Type Number LDF7-50A LDF7RN-50A
521

Frequency Band, GHz 0.780-0.960 Type Number LDF7P-50A-13A Using Connector Type* N 7-16 DIN Male 7-16 DIN Female N 7-16 DIN N 7-16 DIN N: 7-16 DIN N 7-16 DIN Male N Female Bulkhead 7/8" EIA F Flange Female 7-16 DIN Female LC Female 1-5/8" EIA F Flange Male LC Male N 7-16 DIN N 7-16 DIN Male N Female Bulkhead 7/8" EIA F Flange Female 7-16 DIN Female LC Female 1-5/8" EIA F Flange Male N 7-16 DIN Male N Female Bulkhead 7/8" EIA F Flange Female 7-16 DIN Female LC Female 1-5/8" EIA F Flange Male N 7-16 DIN Male N Female Bulkhead 7/8" EIA F Flange Female 7-16 DIN Female LC Female 1-5/8" EIA F Flange Male N 7-16 DIN Male N Female Bulkhead 7/8" EIA F Flange Female 7-16 DIN Female LC Female 1-5/8" EIA F Flange Male N 7-16 DIN Male 7/8" EIA 7-16 DIN Female 1-5/8" EIA F Flange Male 1-25 ft (0.3-8 m) 1.07 (29.4) 1.07 (29.4) 1.08 (28.3) 1.06 (30.7) 1.06 (30.7) 1.09 (27.3) 1.09 (27.3) 1.10 (26.4) 1.10 (26.4) 1.06 (30.7) 1.06 (30.7) 1.10 (26.4) 1.06 (30.7) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.20 (20.8) 1.30 (17.7) 1.10 (26.4) 1.10 (26.4) 1.08 (28.3) 1.08 (28.3) 1.10 (26.4) 1.08 (28.3) 1.30 (17.7) 1.10 (26.4) 1.20 (20.8) 1.10 (26.4) 1.12 (24.9) 1.08 (28.3) 1.08 (28.3) 1.10 (26.4) 1.08 (28.3) 1.20 (20.8) 1.10 (26.4) 1.30 (17.7) 1.10 (26.4) 1.12 (24.9) 1.08 (28.3) 1.10 (26.4) 1.25 (19.1) 1.08 (28.3) 1.30 (17.7) 1.20 (20.8) 1.25 (19.1) 1.20 (20.8) 1.15 (23.1) 1.08 (28.3) 1.10 (26.4) 1.25 (19.1) 1.08 (28.3) 1.30 (17.7) 1.20 (20.8) 1.25 (19.1) 1.15 (23.1) 1.20 (20.8) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.15 (23.1) 1.15 (23.1) 1.10 (26.4) Assembly VSWR, Maximum (R.L., dB) 25-100 ft 100-200 ft 200-500 ft (8-30 m) (30-60 m) (60-150 m) 1.07 (29.4) 1.07 (29.4) 1.08 (28.3) 1.07 (29.4) 1.07 (29.4) 1.09 (27.3) 1.09 (27.3) 1.10 (26.4) 1.10 (26.4) 1.08 (28.3) 1.08 (28.3) 1.12 (24.9) 1.08 (28.3) 1.18 (21.6) 1.12 (24.9) 1.12 (24.9) 1.15 (23.1) 1.22 (20.1) 1.32 (17.2) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.12 (24.9) 1.10 (26.4) 1.32 (17.2) 1.12 (24.9) 1.22 (20.1) 1.12 (24.9) 1.15 (23.1) 1.10 (26.4) 1.10 (26.4) 1.12 (24.9) 1.10 (26.4) 1.22 (20.1) 1.12 (24.9) 1.32 (17.2) 1.12 (24.9) 1.15 (23.1) 1.10 (26.4) 1.15 (23.1) 1.28 (18.2) 1.10 (26.4) 1.35 (16.5) 1.25 (19.1) 1.30 (17.7) 1.25 (19.1) 1.20 (20.8) 1.10 (26.4) 1.15 (23.1) 1.28 (18.2) 1.10 (26.4) 1.35 (16.5) 1.25 (19.1) 1.30 (17.7) 1.20 (20.8) 1.25 (19.1) 1.20 (20.8) 1.20 (20.8) 1.20 (20.8) 1.25 (19.1) 1.25 (19.1) 1.20 (20.8) 1.08 (28.3) 1.08 (28.3) 1.10 (26.4) 1.08 (28.3) 1.08 (28.3) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.15 (23.1) 1.10 (26.4) 1.20 (20.8) 1.15 (23.1) 1.18 (21.6) 1.18 (21.6) 1.25 (19.1) 1.35 (16.5) 1.10 (26.4) 1.10 (26.4) 1.12 (24.9) 1.12 (24.9) 1.15 (23.1) 1.12 (24.9) 1.35 (16.5) 1.15 (23.1) 1.25 (19.1) 1.15 (23.1) 1.18 (21.6) 1.12 (24.9) 1.12 (24.9) 1.15 (23.1) 1.12 (24.9) 1.25 (19.1) 1.15 (23.1) 1.35 (16.5) 1.15 (23.1) 1.18 (21.6) 1.12 (24.9) 1.20 (20.8) 1.30 (17.7) 1.12 (24.9) 1.40 (15.6) 1.28 (18.2) 1.35 (16.5) 1.28 (18.2) 1.25 (19.1) 1.12 (24.9) 1.20 (20.8) 1.30 (17.7) 1.12 (24.9) 1.40 (15.6) 1.28 (18.2) 1.35 (16.5) 1.25 (19.1) 1.28 (18.2) 1.30 (17.7) 1.30 (17.7) 1.30 (17.7) 1.35 (16.5) 1.35 (16.5) 1.30 (17.7) 1.10 (26.4) 1.10 (26.4) 1.12 (24.9) 1.09 (27.3) 1.09 (27.3) 1.12 (24.9) 1.12 (24.9) 1.10 (26.4) 1.10 (26.4) 1.12 (24.9) 1.12 (24.9) 1.18 (21.6) 1.12 (24.9) 1.22 (20.1) 1.18 (21.6) 1.20 (20.8) 1.20 (20.8) 1.28 (18.2) 1.38 (15.9) 1.10 (26.4) 1.10 (26.4) 1.15 (23.1) 1.15 (23.1) 1.20 (20.8) 1.15 (23.1) 1.38 (15.9) 1.20 (20.8) 1.28 (18.2) 1.20 (20.8) 1.20 (20.8) 1.15 (23.1) 1.15 (23.1) 1.20 (20.8) 1.15 (23.1) 1.28 (18.2) 1.20 (20.8) 1.38 (15.9) 1.20 (20.8) 1.20 (20.8) 1.15 (23.1) 1.25 (19.1) 1.32 (17.2) 1.15 (23.1) 1.45 (14.8) 1.30 (17.7) 1.40 (15.6) 1.30 (17.7) 1.28 (18.2) 1.15 (23.1) 1.25 (19.1) 1.32 (17.2) 1.15 (23.1) 1.45 (14.8) 1.30 (17.7) 1.40 (15.6) 1.28 (18.2) 1.30 (17.7) 1.55 (13.3) 1.60 (12.7) 1.55 (13.3) 1.65 (12.2) 1.65 (12.2) 1.55 (13.3) Above 500 ft (150 m) 1.12 (24.9) 1.12 (24.9) 1.12 (24.9) 1.10 (26.4) 1.10 (26.4) 1.12 (24.9) 1.12 (24.9) 1.10 (26.4) 1.10 (26.4) 1.15 (23.1) 1.15 (23.1) 1.20 (20.8) 1.15 (23.1) 1.25 (19.1) 1.20 (20.8) 1.22 (20.1) 1.22 (20.1) 1.30 (17.7) 1.40 (15.6) 1.10 (26.4) 1.10 (26.4) 1.15 (23.1) 1.20 (20.8) 1.25 (19.1) 1.15 (23.1) 1.40 (15.6) 1.25 (19.1) 1.30 (17.7) 1.25 (19.1) 1.25 (19.1) 1.15 (23.1) 1.20 (20.8) 1.25 (19.1) 1.15 (23.1) 1.30 (17.7) 1.25 (19.1) 1.40 (15.6) 1.25 (19.1) 1.25 (19.1) 1.15 (23.1) 1.25 (19.1) 1.35 (16.5) 1.15 (23.1) 1.50 (14.0) 1.35 (16.5) 1.40 (15.6) 1.35 (16.5) 1.30 (17.7) 1.15 (23.1) 1.25 (19.1) 1.35 (16.5) 1.15 (23.1) 1.50 (14.0) 1.35 (16.5) 1.40 (15.6) 1.30 (17.7) 1.35 (16.5) 1.65 (12.2) 1.65 (12.2) 1.65 (12.2) 1.75 (11.3) 1.75 (11.3) 1.65 (12.2)
0.806-0.960 0.800-0.960 and 1.85-1.99 0.806-0.960 and 1.7-2.2 1.427-1.535
LDF7P-50A-40 LDF7P-50A-17A LDF7P-50A-42 LDF7P-50A-4A
1.7-2.2 1.7-2.11
LDF7P-50A-41 LDF7P-50A-6A
1.85-2.11
LDF7P-50A-7A
1.9-2.3
LDF7P-50A-8A
2.1-2.2
LDF7P-50A-9A
0.01-2.5*
LDF7P-50A-10A
522
Revised 9/00 & 3/01
Accessories

see pages 599-607 Standard Hangers Kit of 10. Standard tower configuration spacing is 3-4 feet (1-1.2 m). For different spacing recommendations, refer to Cable Hanger Spacing, page 593-598 42396A-2 Hardware Kit of 10. 3/8" bolts, lockwashers, nuts 3/4" (19 mm) long 1" (25 mm) long 31769-5 31769-1

see pages 617-618 WeatherShield Connector Protection Housing LDF7 to LDF4 LDF7 to FSJ4 Cold Shrink Weatherproofing Kit 1-5/8" Coax to 1-5/8" Coax N Connectors 1-5/8" Coax to 1/4" Coax 1-5/8" Coax to 3/8" or 1/2" Coax 1-5/8" to APTL7 Arrestors Connector/Splice Weatherproofing Kit 241474-6 241475-11 241475-5A 241474-6 221213 WS-L7L4 WS-L7F4
Snap-in Hangers Kit of 10. For prepunched 3/4" (19 mm) holes on tower member or adapters, Recommended maximum spacing is 3-ft. For different spacing recommendations, refer to Cable Hanger Spacing, page 593-598 206706-4 Click-On Hangers Kit of 10. Recommended maximum spacing is 3-ft Mounting Hardware see page 605 Kwik-Clamps Kit of 10. See page 607 for hanger options Support/Hoisting Grip. Use at 200-ft (60m) intervals. Grip with one clamp Support clamp kit of 10 Standard Hoisting Grip L7SGRIP L7SGRIP-7IK 24312 L7CLICK



* Frequency band. See page 614.
523
LDF12-50

Frequency MHz 0.5 1 1.5 2 10 20 30 50 88 100 108 150 174 200 300 400 450 500 512 600 700 800 824 894 960 1000 1250 1500 1700 1800 2000 2100 2200 Attenuation dB/100 ft 0.011 0.016 0.020 0.023 0.052 0.074 0.091 0.119 0.161 0.173 0.180 0.215 0.234 0.253 0.317 0.374 0.400 0.426 0.432 0.474 0.519 0.562 0.572 0.601 0.628 0.644 0.739 0.828 0.896 0.929 0.994 1.03 1.06 Attenuation dB/100 m 0.037 0.052 0.064 0.074 0.169 0.242 0.299 0.391 0.529 0.566 0.591 0.707 0.767 0.829 1.04 1.23 1.31 1.40 1.42 1.55 1.70 1.84 1.88 1.97 2.06 2.11 2.42 2.72 2.94 3.05 3.26 3.37 3.47 Average Power, kW 321.0 227.0 185.0 160.0 70.3 49.2 39.8 30.4 22.5 21.0 20.1 16.8 15.5 14.4 11.4 9.7 9.06 8.52 8.40 7.66 6.99 6.45 6.34 6.03 5.78 5.64 4.91 4.38 4.05 3.91 3.65 3.54 3.43

Standard Cable 2-1/4" Standard Cable, Standard Jacket Fire Retardant Cable 2-1/4" Fire Retardant Jacket (CATVR) Low VSWR Cable 2-1/4" Low VSWR, specify operating band LDF12-50 LDF12RN-50 LDF12P-50-(**)
Characteristics
Electrical Impedance, ohms Maximum Frequency, GHz Velocity, percent Peak Power Rating, kW dc Resistance, ohms/1000 ft (1000 m) Inner Outer dc Breakdown, volts Jacket Spark, volts RMS Capacitance, pF/ft (m) Inductance, H/ft (m) Mechanical Outer Conductor Inner Conductor Diameter over Jacket, in (mm) Diameter over Copper Outer Conductor, in (mm) Diameter Inner Conductor, in (mm) Minimum Bending Radius, in (mm) One-Time Bending Radius, in (mm) Number of Bends, minimum (typical) Bending Moment, lb-ft (Nm) Cable Weight, lb/ft (kg/m) Tensile Strength, lb (kg) Flat Plate Crush Strength, lb/in (kg/mm) 50 1 2.2 88 425 0.21 (0.68) 0.09 (0.29) 13000 10000 22.7 (74.6) 0.058 (0.189) Copper Copper Tube 2.35 (60) 2.2 (55.9) 0.835 (21.2) 22 (560) 9.5 (240) 15 (50) 70 (95) 1.22 (1.82) 1500 (681) 150 (2.7)
524
Revised 9/00
7-16 DIN Female L12PDF
3-1/8" EIA Flange L12FB-302
Connectors
Interface N Female 7-16 DIN Male 7-16 DIN Female 3 1/8" EIA Flange 3 1/8" EIA Flange Splice Description Gas Pass Gas Barrier Type Number L12PNF L12PDM L12PDF L12FP-302 L12FB-302 L12Z Inner Contact Attachment Self-Tapping Self-Tapping Self-Tapping Self-Tapping Self-Tapping Self-Tapping Outer Contact Attachment Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Plating Code SS SS SS BS BS BB Max. Length in (mm) 5.1 (130) 5.8 (147) 5.5 (139) 7.6 (192) 7.6 (192) 5.8 (147) Max. Dia. in (mm) 2.75 (69.9) 2.75 (69.9) 2.75 (69.9) 5.19 (131.8) 5.19 (131.8) 3.00 (76.2)

Frequency Band, GHz 0.806-0.960 0.806-0.96 and 1.7-2.2 1.7-1.9 1-25 ft (0.3-8 m) 1.08 (28.3) 1.08 (28.3) 1.13 (24.2) 1.13 (24.2) 1.13 (24.2) 1.13 (24.2) Assembly VSWR, Maximum (R.L., dB) 25-100 ft 100-200 ft 200-500 ft (8-30 m) (30-60 m) (60-150 m) 1.09 (27.3) 1.09 (27.3) 1.14 (23.7) 1.14 (23.7) 1.13 (24.2) 1.13 (24.2) 1.10 (26.4) 1.10 (26.4) 1.15 (23.1) 1.15 (23.1) 1.14 (23.7) 1.14 (23.7) 1.10 (26.4) 1.10 (26.4) 1.15 (23.1) 1.15 (23.1) 1.14 (23.7) 1.14 (23.7) Above 500 ft (150 m) 1.10 (26.4) 1.10 (26.4) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1)
Type Number LDF12P-50-1 LDF12P-50-2 LDF12P-50-3
Using Connector Type* N Female 7-16 DIN Female N Female 7-16 DIN Female N Female 7-16 DIN Female
525
Accessories

see pages 599-607 Standard Hangers Kit of 10. Standard tower configuration spacing is 3-4 feet (1-1.2m). For different spacing recommendations, refer to Cable Hanger Spacing, page 593-598 42396A-4 Hardware Kit of 10. 3/8" bolts, lockwashers, nuts 3/4" (19mm) long 1" (25mm) long 31769-5 31769-1

see pages 617-618 Cold Shrink Weatherproofing Kit 2-1/4" Coax - to 3/8" or 1/2" Coax Connector/Splice Weatherproofing Kit 241475-8 221213

Standard Cable Entry Boots 4" Boots One Hole: 5" Boots One Hole: 204679A-8 48939A-9
Snap-in Hangers Kit of 10. For prepunched 3/4" (19mm) holes on tower member or adapters. Standard tower configuration spacing is 3-4 feet. (1-1.2m). For different spacing recommendations, refer to Cable Hanger Spacing, page 593-598 206706-5 Support/Hoisting Grip. Use at 200-ft (60m) intervals. Grip with one clamp Support clamp kit of 10 Standard Hoisting Grip L12SGRIP L12SGRIP-12IK 31535

LDF12 Connector Torque Wrench DIN Connector Coupling Torque Wrench N Connector Coupling Torque Wrench 244373 244377 244379

526
1/4'' Air Dielectric, Plenum Rated (CATVP), HS Series 50-ohm
HS1RP-50A

Frequency MHz 0.5 1 1.5 2 10 20 30 50 88 100 108 150 174 200 300 400 450 500 512 600 700 800 824 894 960 1000 1250 1500 1700 1800 2000 2100 2200 2300 3000 3400 4000 5000 6000 8000 10000 Attenuation dB/100 ft 0.120 0.170 0.209 0.241 0.541 0.767 0.941 1.22 1.62 1.73 1.80 2.13 2.30 2.47 3.04 3.53 3.75 3.96 4.01 4.36 4.72 5.07 5.14 5.37 5.58 5.70 6.41 7.06 7.55 7.79 8.24 8.46 8.68 8.89 10.3 11.0 12.0 13.6 15.1 17.7 20.2 Attenuation dB/100 m 0.395 0.559 0.685 0.792 1.78 2.52 3.09 4.00 5.33 5.69 5.91 6.99 7.54 8.10 9.98 11.6 12.3 13.0 13.2 14.3 15.5 16.6 16.9 17.6 18.3 18.7 21.0 23.2 24.8 25.5 27.0 27.8 28.5 29.2 33.7 36.1 39.5 44.7 49.5 58.2 66.2 Average Power, kW 6.40 6.40 6.40 6.10 2.72 1.92 1.56 1.21 0.907 0.850 0.817 0.691 0.640 0.596 0.484 0.417 0.393 0.372 0.367 0.338 0.312 0.291 0.286 0.274 0.264 0.259 0.230 0.209 0.195 0.189 0.179 0.174 0.170 0.166 0.144 0.134 0.123 0.108 0.098 0.083 0.073

Plenum Cable 1/4" Fire Retardant Cable, 1/4" Fire Retardant Jacket (CATVP)
HS1RP-50A
Characteristics
Electrical Impedance, ohms Maximum Frequency, GHz Velocity, percent Peak Power Rating, kW dc Resistance, ohms/1000 ft (1000 m) Inner Outer dc Breakdown, volts Jacket Spark, volts RMS Capacitance, pF/ft (m) Inductance, H/ft (m) Mechanical Outer Conductor Inner Conductor Diameter over Jacket, in (mm) Diameter over Copper Outer Conductor, in (mm) Minimum Bending Radius, in (mm) Number of Bends, minimum (typical) Bending Moment, lb-ft (Nm) Cable Weight, lb/ft (kg/m) Tensile Strength, lb (kg) Flat Plate Crush Strength, lb/in (kg/mm) 50 2 10 84 6.4 2.1 (6.8) 2.0 (6.5) 1600 4000 23.8 (78.0) 0.061 (0.202) Copper Copper 0.29 (7.4) 0.25 (6.4) 1 (25) 15 (20) 1.9 (2.6) 0.063 (45) 100 (45) 80 (1.4)
527
N Male F1PNMV2-H
SMA Male F1PSM
BNC Male F1PBM
TNC Male F1PTM-HF
UHF Male 41SP
Connectors
Interface N Male N Male N Male N Female N Female BNC Male UHF Male UHF Female SMA Male SMA Male SMA Female SMA Male SMA Female TNC Male TNC Female TNC Male Mini-UHF Male 7-16 DIN Male 7-16 DIN Female 7-16 DIN Female 7-16 DIN Female Description Hex Head High Freq. Right Angle Hex Head Bulkhead Up to 6 GHz Right Angle Up to 6 GHz, Bulkhead Up to 18 GHz Up to 18 GHz 11 GHz and Below Bulkhead Hi Freq, Above 11 GHz Panel Mount Bulkhead Type Number F1PNMV2-H F1PNM-HF F1PNR-HC F1PNF F1PNF-BH F1PBM 41SP 41U F1PSM F1PSR F1PSF 41EWS 41ENS F1PTM 41AENT F1PTM-HF F1MU F1PDM F1PDF F1PDF-PM F1PDF-BH Inner Contact Attachment Solder Solder Captivated Solder Solder Solder Solder Solder Solder Solder Solder Solder Solder Solder Captivated Captivated Captivated Solder Solder Solder Solder Outer Contact Attachment Self-Clamping Tab Flare Self-Clamping Self-Flare Self-Clamping Self-Clamping Solder Solder Self-Clamping Self-Clamping Self-Clamping Tab Flare Tab Flare Self-Clamping Tab Flare Tab Flare Crimp Self-Clamping Self-Clamping Self-Clamping Self Clamping Plating Code SG SG SG SG SG SS BB BS PG PG PG G G SG NG NG NS SS SS SS SS Max. Length in (mm) 2.1 (53) 1.3 (33) 1.7/1.3 (43/33) 2.2 (55.2) 2.3 (58) 2.0 (50) 1.8 (46) 2.1 (53) 1.7 (43) 1.6/0.75 (41/19) 1.7 (43) 0.94 (23.9) 1.00 (25.4) 1.68 (43) 1.5 (38) 1.9 (48.8) 1.53 (39) 1.82 (46.3) 1.85 (47) 1.85 (47) 1.85 (47) Max. Dia. in (mm) 0.95 (24.1) 0.81 (20.5) 0.95 (24.1) 0.58 (14.8) 0.94 (23.9) 0.69 (17.5) 0.77 (19.6) 0.77 (19.6) 0.49 (12.5) 0.50 (12.7) 0.49 (12.5) 0.40 (10.2) 0.40 (10.2) 0.57 (14.5) 0.70 (17.8) 0.70 (17.8) 0.47 (11.9) 1.25 (31.75) 0.551 (14) 1.26 (32) 1.62 (41)
* Stainless steel body Plating Codes: BB - Brass Body and Pin, BS - Brass Body and Silver Plated Pin, NG - Nickel Plated Body and Gold Plated Pin, NS- Nickel Plated Body and Silver Plated Pin, PG - Passivated Body and Gold Plated Pin, SG - Silver Plated Body and Gold Plated Pin, SS - Silver Plated Body and Pin, G - Stainless Steel Body and Gold Plated Pin.
Connector Accessories See page 624 Factory Attached Connectors For factory made cable assemblies and jumper cables, see pages 584-587. Accessories
Description
Type No.


see pages 599-607 Insulated Hanger, single. Recommended maximum spacing is 2.5 ft (0.76 m). For different spacing recommendations, refer to Cable Hanger Spacing, page 593-598 11662-3 Angle Adapter, for insulated hanger 40430-1 Nylon Cable Tie Kit of 50, Indoor use, Recommended maximum spacing is 1.5 ft (0.5 m) 40417 Nylon Cable Tie Kit in plastic box. 100 each 4, 5.5 and 7.5 inch ties. Indoor use, Recommended maximum spacing is 1.5 ft (0.5 m) CT-K350 Velcro Cable Ties, Black, 8 inch. Indoor Use Kit of 10 VCT8-10 Kit of 50 VCT8-50 Kit of 100 VCT8-100



EASIAX Cutting Tool FSJ1/FSJ4/HS1 N Connector Coupling Torque Wrench 207865 244379
528
Revised 7/00
1/4'' High Power, High Temperature, Air Dielectric, HST Series 50-ohm
HST1-50

Frequency MHz 0.5 1 1.5 2 10 20 30 50 88 100 108 150 174 200 300 400 450 500 512 600 700 800 824 894 960 1000 1250 1500 1700 1800 2000 2100 2200 2300 3000 3400 4000 5000 6000 8000 10000 12000 14000 16000 18000 Attenuation dB/100 ft 0.116 0.165 0.202 0.233 0.523 0.742 0.911 1.18 1.57 1.68 1.75 2.07 2.23 2.40 2.96 3.43 3.65 3.86 3.91 4.25 4.61 4.95 5.02 5.25 5.45 5.57 6.28 6.92 7.41 7.64 8.10 8.31 8.53 8.74 10.1 10.9 11.9 13.5 15.0 17.7 20.2 22.5 24.7 26.8 28.8 Attenuation dB/100 m 0.382 0.540 0.662 0.764 1.72 2.43 2.99 3.87 5.16 5.51 5.73 6.78 7.32 7.87 9.70 11.3 12.0 12.7 12.8 13.9 15.1 16.2 16.5 17.2 17.9 18.3 20.6 22.7 24.3 25.1 26.6 27.3 28.0 28.7 33.2 35.6 39.0 44.3 49.1 58.0 66.2 73.8 81.0 87.8 94.4 Average Power, kW 6.40 6.40 6.40 6.40 6.26 4.41 3.60 2.77 2.08 1.95 1.87 1.58 1.47 1.37 1.11 0.954 0.897 0.849 0.838 0.771 0.711 0.662 0.652 0.624 0.601 0.588 0.522 0.473 0.442 0.429 0.405 0.394 0.384 0.375 0.324 0.302 0.276 0.243 0.219 0.185 0.163 0.146 0.133 0.123 0.114

High Power, High Temperature Cable 1/4" Cable HST1-50
Characteristics
Electrical Impedance, ohms 50 2 Maximum Frequency, GHz 18 Velocity, percent 82 Peak Power Rating, kW 6.4 dc Resistance, ohms/1000 ft (1000 m) Inner 2.05 (6.71) Outer 2.0 (6.5) dc Breakdown, volts 1600 Jacket Spark, volts RMS 4000 Capacitance, pF/ft (m) 25.1 (82.4) Inductance, H/ft (m) 0.061 (0.202) Mechanical Outer Conductor Copper Inner Conductor Silver Plated Copper Diameter over Jacket, in (mm) 0.29 (7.4) Diameter over Copper Outer Conductor, in (mm) 0.25 (6.4) Minimum Bending Radius, in (mm) 1 (25) Number of Bends, minimum (typical) 15 (20) Bending Moment, lb-ft (Nm) 1.7 (2.3) Cable Weight, lb/ft (kg/m) 0.057 (0.085) Tensile Strength, lb (kg) 100 (45) Flat Plate Crush Strength, lb/in (kg/mm) 80 (1.4)
529
N Male F1PNMV2-H
SMA Male F1PSM
BNC Male F1PBM
TNC Male F1PTM-HF
UHF Male 41SP
Connectors
Interface N Male N Male N Male N Female N Female BNC Male UHF Male UHF Female SMA Male SMA Male SMA Female SMA Male SMA Female TNC Male TNC Female TNC Male Mini-UHF Male 7-16 DIN Male 7-16 DIN Female 7-16 DIN Female 7-16 DIN Female Description Hex Head High Freq. Right Angle Hex Head Bulkhead Up to 6 GHz Right Angle Up to 6 GHz, Bulkhead Up to 18 GHz Up to 18 GHz 11 GHz and Below Bulkhead Hi Freq, Above 11 GHz Panel Mount Bulkhead Type Number F1PNMV2-H F1PNM-HF F1PNR-HC F1PNF F1PNF-BH F1PBM 41SP 41U F1PSM F1PSR F1PSF 41EWS 41ENS F1PTM 41AENT F1PTM-HF F1MU F1PDM F1PDF F1PDF-PM F1PDF-BH Inner Contact Attachment Solder Solder Captivated Solder Solder Solder Solder Solder Solder Solder Solder Solder Solder Solder Captivated Captivated Captivated Solder Solder Solder Solder Outer Contact Attachment Self-Clamping Tab Flare Self-Clamping Self-Flare Self-Clamping Self-Clamping Solder Solder Self-Clamping Self-Clamping Self-Clamping Tab Flare Tab Flare Self-Clamping Tab Flare Tab Flare Crimp Self-Clamping Self-Clamping Self-Clamping Self Clamping Plating Code SG SG SG SG SG SS BB BS PG PG PG G G SG NG NG NS SS SS SS SS Max. Length in (mm) 2.1 (53) 1.3 (33) 1.7/1.3 (43/33) 2.2 (55.2) 2.3 (58) 2.0 (50) 1.8 (46) 2.1 (53) 1.7 (43) 1.6/0.75 (41/19) 1.7 (43) 0.94 (23.9) 1.00 (25.4) 1.68 (43) 1.5 (38) 1.9 (48.8) 1.53 (39) 1.82 (46.3) 1.85 (47) 1.85 (47) 1.85 (47) Max. Dia. in (mm) 0.95 (24.1) 0.81 (20.5) 0.95 (24.1) 0.58 (14.8) 0.94 (23.9) 0.69 (17.5) 0.77 (19.6) 0.77 (19.6) 0.49 (12.5) 0.50 (12.7) 0.49 (12.5) 0.40 (10.2) 0.40 (10.2) 0.57 (14.5) 0.70 (17.8) 0.70 (17.8) 0.47 (11.9) 1.25 (31.75) 0.551 (14) 1.26 (32) 1.62 (41)
Connector Accessories See page 624 Factory Attached Connectors For factory made cable assemblies and jumper cables, see pages 584-587. Accessories
Description
Type No.


see pages 599-607 Insulated Hanger, single. Recommended maximum spacing is 2.5 ft (0.76 m). For different spacing recommendations, refer to Cable Hanger Spacing, page 593-598 11662-3 Angle Adapter, for insulated hanger 40430-1 Nylon Cable Tie Kit of 50, Indoor use, Recommended maximum spacing is 1.5 ft (0.5 m) 40417 Nylon Cable Tie Kit in plastic box. 100 each 4, 5.5 and 7.5 inch ties. Indoor use, Recommended maximum spacing is 1.5 ft (0.5 m) CT-K350 Velcro Cable Ties, Black, 8 inch. Indoor Use Kit of 10 VCT8-10 Kit of 50 VCT8-50 Kit of 100 VCT8-100



EASIAX Cutting Tool FSJ1/FSJ4/HS1/HST1 N Connector Coupling Torque Wrench 207865 244379
530
Revised 7/00
3/8" Air Dielectric, Plenum Rated (CATVP), HS Series 50-ohm
HS2RP-50

Plenum Cable 3/8" Fire Retardant Cable HS2RP-50
Characteristics
Electrical Impedance, ohms Maximum Frequency, GHz Velocity, percent Peak Power Rating, kW dc Resistance, ohms/1000 ft (1000 m) Inner Outer dc Breakdown, volts Jacket Spark, volts RMS Capacitance, pF/ft (m) Inductance, H/ft (m) Mechanical Outer Conductor Copper Inner Conductor Copper-Clad Aluminum Diameter over Jacket, in (mm) 0.415 (10.5) Diameter over Copper Outer Conductor, in (mm) 0.375 (9.5) Minimum Bending Radius, in (mm) 1 (25) Number of Bends, minimum 20 (50) Bending Moment, lb-ft (Nm) 1.8 (2.45) Cable Weight, lb/ft. (kg/m) 0.076 (0.113) Tensile Strength, lb (kg) 210 (95) Flat Plate Crush Strength, lb/in (kg/mm) 100 (1.8) 50 2 13.4 83 13.2 1.41 (4.64) 1.52 (4.99) 2300 5000 23.61 (77.47) 0.064 (0.208)
531
N Male F2PNM-H
N Female F2PNF
Connectors
Bulkhead
Accessories

see pages 599-607. Insulated Hanger, single. Recommended maximum spacing is 2.5 ft (0.76 m). For different spacing recommendations, refer to Cable Hanger Spacing, page 593-598. 11662-3 Angle Adapter, for insulated hanger 40430-1 Nylon Cable Tie Kit of 50, Indoor use, Recommended maximum spacing is 1.5 ft (0.5 m) 40417 Nylon Cable Tie Kit in plastic box. 100 each 4, 5.5 and 7.5 inch ties. Indoor use, Recommended maximum spacing is 1.5 ft (0.5 m) CT-K350 Velcro Cable Ties, Black, 8 inch. Indoor Use Kit of 10 VCT8-10 Kit of 50 VCT8-50 Kit of 100 VCT8-100
Accessories

see pages 617-618. Connector/Splice Weatherproofing Kit 221213
Entry Systems For entry systems offerings see pages 619-620.

Standard Cable Entry Boots 4" Boots One Hole: 5" Boots Three Hole: 204679A-19 48939A-16

kits and our surge protection offerings, see pages 609-616. Standard Grounding Kit Factory attached one-hole lug, 24" lead 223158 Factory attached two-hole lug, 24" lead 223158-2 Field attached one-hole lug, 36" lead 223158-3
Tools for additional tool offerings see pages 620-623.

EASIAX Cutting Tool FSJ2/FSJ4 N Connector Coupling Torque Wrench 241372 244379
532
3/8" High Power, High Temperature Plenum Rated, Air Dielectric, HST Series 50-ohm
HST2-50

High Power, High Temperature, Plenum Cable 3/8" Cable HST2-50
Characteristics
Electrical Impedance, ohms Maximum Frequency, GHz Velocity, percent Peak Power Rating, kW dc Resistance, ohms/1000 ft (1000 m) Inner Outer dc Breakdown, volts Jacket Spark, volts RMS Capacitance, pF/ft (m) Inductance, H/ft (m) Mechanical Outer Conductor Copper Inner Conductor Silver Plated, Copper-Clad Aluminum Diameter over Jacket, in (mm) 0.415 (10.5) Diameter over Copper Outer Conductor, in (mm) 0.375 (9.5) Minimum Bending Radius, in (mm) 1 (25) Number of Bends, minimum 20 (50) Bending Moment, lb-ft (Nm) 1.8 (2.45) Cable Weight, lb/ft. (kg/m) 0.094 (0.140) Tensile Strength, lb (kg) 210 (95) Flat Plate Crush Strength, lb/in (kg/mm) 100 (1.8) 50 2 13.4 83 13.2 1.41 (4.64) 1.52 (4.99) 2300 5000 23.61 (77.47) 0.064 (0.208)
533
N Male F2PNM-H
N Female F2PNF
Connectors
Bulkhead
Accessories

see pages 599-607. Insulated Hanger, single. Recommended maximum spacing is 2.5 ft (0.76 m). For different spacing recommendations, refer to Cable Hanger Spacing, page 593-598. 11662-3 Angle Adapter, for insulated hanger 40430-1 Nylon Cable Tie Kit of 50, Indoor use, Recommended maximum spacing is 1.5 ft (0.5 m) 40417 Nylon Cable Tie Kit in plastic box. 100 each 4, 5.5 and 7.5 inch ties. Indoor use, Recommended maximum spacing is 1.5 ft (0.5 m) CT-K350 Velcro Cable Ties, Black, 8 inch. Indoor Use Kit of 10 VCT8-10 Kit of 50 VCT8-50 Kit of 100 VCT8-100
Accessories


Standard Cable Entry Boots 4" Boots One Hole: 5" Boots Three Hole: 204679A-19 48939A-16


EASIAX Cutting Tool FSJ2/FSJ4 N Connector Coupling Torque Wrench 241372 244379
534
1/2" Air Dielectric, HJ Series 50-ohm
HJ4-50
Description Type No. Frequency MHz 0.5 1 1.5 2 10 20 30 50 88 100 108 150 174 200 300 400 450 500 512 600 700 800 824 894 960 1000 1250 1500 1700 2000 2300 3000 4000 5000 6000 8000 10000 10900 Attenuation dB/100 ft 0.0560 0.0792 0.0971 0.112 0.253 0.359 0.442 0.574 0.768 0.821 0.854 1.01 1.10 1.18 1.46 1.71 1.82 1.92 1.95 2.12 2.31 2.49 2.53 2.64 2.75 2.81 3.19 3.53 3.80 4.17 4.52 5.28 6.27 7.17 8.03 9.61 11.1 11.7 Attenuation dB/100 m 0.184 0.260 0.319 0.37 0.83 1.18 1.45 1.88 2.52 2.69 2.80 3.33 3.60 3.87 4.80 5.60 5.96 6.31 6.39 6.97 7.58 8.16 8.29 8.68 9.03 9.23 10.5 11.6 12.5 13.7 14.8 17.3 20.6 23.5 26.3 31.5 36.4 38.4 Average Power, kW 21.0 21.0 20.0 17.3 7.69 5.41 4.40 3.38 2.53 2.37 2.27 1.91 1.77 1.65 1.33 1.14 1.07 1.01 1.00 0.914 0.840 0.781 0.768 0.734 0.706 0.690 0.609 0.549 0.512 0.466 0.430 0.368 0.310 0.271 0.242 0.202 0.175 0.166

Standard and Fire Retardant Cables 1/2" Standard Cable, Standard Jacket 1/2" Fire Retardant Jacket (CATVR) Low VSWR and Specialized Cables 1/2" Low VSWR, specify operating band Cable for Cellular, standard jacket 824-960 MHz, 1.20 VSWR, max. HJ4-50 HJ4RN-50 HJ4P-50-(**) HJ4P-50-5
Characteristics
Electrical Impedance, ohms Maximum Frequency, GHz Velocity, percent Peak Power Rating, kW dc Resistance, ohms/1000 ft (1000 m) Inner Outer dc Breakdown, volts Jacket Spark, volts RMS Capacitance, pF/ft (m) Inductance, H/ft (m) Mechanical Outer Conductor Inner Conductor Diameter over Jacket, in (mm) Diameter over Copper Outer Conductor, in (mm) Diameter Inner Conductor, in (mm) Nominal Inside Transverse Dimensions, cm Minimum Bending Radius, in (mm) Number of Bends, minimum (typical) Bending Moment, lb-ft (Nm) Cable Weight, lb/ft (kg/m) Tensile Strength, lb (kg) Flat Plate Crush, lb/in (kg/mm) 50 1 10.9 91.4 21.0 0.45 (1.48) 0.40 (1.31) 2900 8000 22.2 (73.0) 0.056 (0.182) Copper Copper 0.58 (14.7) 0.50 (12.7) 0.165 (4.2) 0.90 5 (125) 15 (20) 8 (10.9) 0.25 (0.37) 700 (320) 250 (4.5)
Standard Conditions: For Attenuation. VSWR 1.0 ambient temperature 20C (68F), atmospheric pressure, dry air. For Average Power, VSWR 1.0, inner temperature 100C (212F), ambient temperature 40C (104F), atmospheric pressure, dry air, no solar loading. Operation of this cable in the 5350-5500 MHz band is not recommended because of VSWR spikes produced by the dielectric section spacing.
535
N Male H4PNM
N Female H4PNF
7/8" EIA Flange H4MPB-014
Connectors
Interface N Male N Female 7-16 DIN Male 7/8" EIA Flange End Terminal Splice Description Type Number H4PNM H4PNF H4PDM H4MPB-014 74T 74Z Reference* Inner Contact Attachment Solder Solder Spring Finger Solder Solder Solder Outer Contact Attachment Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Plating Code SG SG SS BB BB BB Max. Length in (mm) 2.8 (71) 2.8 (71) 2.6 (66) 3.3 (84) 4.6 (117) 4.9 (124) Max. Dia. in (mm) 1.0 (25) 1.0 (25) 1.3 (33) 2.25 (57) 0.9 (23) 1.1 (28)
Gas Pass/ Barrier Option
74ARG
Plating Codes: BB - Brass Body and Pin, SG - Silver Plated Body and Gold Plated Pin, SS - Silver Plated Body and Pin * Previous Type Number.
Connector Accessories
Type Number Connector Reattachment Kit for H4PNF, H4PNM, 74PN, 74PW Bulkhead Adapter, for N Females 7/8" EIA Gas Barrier 34767A-22 26016-2 1260A
536
Low VSWR Specifications, Type HJ4P-50-( )

Frequency Band, GHz 0.94-1.45 * 1.7-2.3 Type No. HJ4P-50-1 HJ4P-50-4 Using Connector Type** N Male: H4PNM, N Female: H4PNF N Male: H4PNM N Female: H4PNF 7/8" EIA: H4MPB-014 N Male: H4PNM, N Female: H4PNF Assembly VSWR, Maximum (R.L., dB) 1-20 ft (0.3-6 m) Above 20 ft (6 m) 1.20 (20.8) 1.10 (26.4) 1.15 (23.1) 1.10 (26.4) 1.30 (17.7) 1.25 (19.9) 1.15 (23.1) 1.20 (20.8) 1.15 (23.1) 1.35 (16.6)
3.625-4.2 *
HJ4P-50-2
* Specify operating band ** Connectors ordered separately. VSWR values are guaranteed for factory fit assemblies and are typical for cut lengths. If two different connector interfaces are selected, the higher VSWR value is guaranteed.
Accessories

see pages 599-607. Standard Hangers Kit of 10. Recommended maximum spacing is 3-ft (1 m). For different spacing recommendations, refer to Cable Hanger Spacing, page 593-598. 43211A Hardware Kit of 10. 3/8" bolts, lockwashers, nuts 3/4" (19mm) long 1" (25mm) long 31769-5 31769-1


Snap-In Hangers Kit of 10. For pre-punched 3/4" (19mm) holes on tower member or adapters. Recommended maximum spacing is 3-ft (1 m). For different spacing recommendations, refer to Cable Hanger Spacing, page 593-598. 206706-1 Standard Hoisting Grip 43094

kits and our surge protection offerings, see pages 609-616. Standard Grounding Kit with standard weatherproofing Factory attached one-hole lug, 600 mm (24") lead Factory attached two-hole lug, 600 mm (24") lead Field attached two-hole lug, 1500 mm (60") lead 204989-1 241088-1 241545
537
1/2" High Power, High Temperature, Air Dielectric, HT Series 50-ohm
HT4-50
Description Type No. Frequency MHz 0.5 1 1.5 2 10 20 30 50 88 100 108 150 174 200 300 400 450 500 512 600 700 800 824 894 960 1000 1250 1500 1700 2000 2300 3000 4000 5000 6000 8000 10000 10900 Attenuation dB/100 ft 0.0580 0.0822 0.101 0.117 0.265 0.379 0.468 0.613 0.829 0.888 0.926 1.11 1.20 1.30 1.63 1.92 2.06 2.19 2.22 2.43 2.67 2.89 2.94 3.09 3.23 3.31 3.79 4.25 4.60 5.10 5.59 6.65 8.07 9.41 10.7 13.1 15.5 16.5 Attenuation dB/100 m 0.190 0.270 0.331 0.383 0.870 1.24 1.54 2.01 2.72 2.91 3.04 3.63 3.94 4.26 5.35 6.31 6.75 7.18 7.28 7.99 8.75 9.48 9.65 10.1 10.6 10.9 12.4 13.9 15.1 16.7 18.3 21.8 26.5 30.9 35.1 43.1 50.7 54.0 Average Power, kW 21.0 21.0 21.0 21.0 20.8 14.5 11.8 9.00 6.65 6.21 5.96 4.98 4.59 4.25 3.38 2.87 2.68 2.52 2.49 2.27 2.07 1.91 1.88 1.79 1.71 1.67 1.45 1.30 1.20 1.08 0.987 0.829 0.683 0.586 0.516 0.420 0.357 0.335

Standard Cable 1/2" Standard Cable, Unjacketed HT4-50
Characteristics
Electrical Impedance, ohms Maximum Frequency, GHz Velocity, percent Peak Power Rating, kW dc Resistance, ohms/1000 ft (1000 m) Inner Outer dc Breakdown, volts Capacitance, pF/ft (m) Inductance, H/ft (m) Mechanical Outer Conductor Inner Conductor Diameter over Copper Conductor, in (mm) Minimum Bending Radius, in (mm) Number of Bends, minimum (typical) Bending Moment, lb-ft (Nm) Cable Weight, lb/ft (kg/m) Tensile Strength, lb (kg) Flat Plate Crush, lb/in (kg/mm) 50 1 10.9 92.0 21.0 0.45 (1.48) 0.40 (1.31) 2900 22.0 (72.2) 0.056 (0.182) Copper Copper 0.50 (12.7) 5 (125) 15 (30) 7.3 (9.9) 0.21 (0.31) 830 (380) 290 (5.3)
538
N Male H4PNM
N Female H4PNF
7/8" EIA Flange H4MPB-014
Connectors
Interface N Male N Female 7-16 DIN Male 7/8" EIA Flange End Terminal Splice Description Type Number H4PNM H4PNF H4PDM H4MPB-014 74T 74Z Reference* Inner Contact Attachment Solder Solder Spring Finger Solder Solder Solder Outer Contact Attachment Self Flare Self Flare Self Flare Self Flare Self Flare Self Flare Plating Code SG SG SS BB BB BB Max. Length in (mm) 2.8 (71) 2.8 (71) 2.6 (66) 3.3 (84) 4.6 (117) 4.9 (124) Max. Dia. in (mm) 1.0 (25) 1.0 (25) 1.3 (33) 2.25 (57) 0.9 (23) 1.1 (28)
Gas Pass/ Barrier Option
74ARG
Plating Codes: BB - Brass Body and Pin, SG - Silver Plated Body and Gold Plated Pin, SS - Silver Plated Body and Pin * Previous Type Number.
Type Number Connector Reattachment Kit for H4PNF, H4PNM, 74PN, 74PW Bulkhead Adapter, for N Females 7/8" EIA Gas Barrier 34767A-22 26016-2 1260A
Accessories

see pages 599-607. Standard Hangers Kit of 10. Recommended maximum spacing is 3-ft (1 m). For different spacing recommendations, refer to Cable Hanger Spacing, page 593-598. 43211A Hardware Kit of 10. 3/8" bolts, lockwashers, nuts 3/4" (19mm) long 1" (25mm) long Standard Hoisting Grip 31769-5 31769-1 43094

kits and our surge protection offerings, see pages 609-616. Standard Grounding Kit with standard weatherproofing Factory attached one-hole lug, 600 mm (24") lead Factory attached two-hole lug, 600 mm (24") lead Field attached two-hole lug, 1500 mm (60") lead 204989-1 241088-1 241545


539
1/2" Air Dielectric, Plenum Rated (CATVP), HL Series 50-ohm
HL4RP-50
Description Type No. Frequency MHz 0.5 1 1.5 2 10 20 30 50 88 100 108 150 174 200 300 400 450 500 512 600 700 800 824 894 960 1000 1250 1500 1700 1800 2000 2100 2200 2300 3000 3400 4000 5000 6000 Attenuation dB/100 ft 0.049 0.070 0.086 0.099 0.223 0.317 0.389 0.506 0.678 0.725 0.754 0.896 0.968 1.04 1.29 1.51 1.61 1.70 1.73 1.88 2.05 2.20 2.24 2.34 2.44 2.50 2.83 3.14 3.37 3.49 3.71 3.81 3.92 4.02 4.70 5.07 5.59 6.41 7.18 Attenuation dB/100 m 0.162 0.229 0.281 0.324 0.730 1.04 1.28 1.66 2.22 2.38 2.47 2.94 3.18 3.42 4.24 4.95 5.28 5.59 5.66 6.17 6.72 7.23 7.35 7.69 8.00 8.19 9.29 10.3 11.1 11.4 12.2 12.5 12.9 13.2 15.4 16.6 18.3 21.0 23.6 Average Power, kW 40.0 37.8 30.9 26.7 11.9 8.34 6.78 5.22 3.89 3.64 3.50 2.95 2.73 2.53 2.04 1.75 1.64 1.55 1.53 1.40 1.29 1.20 1.18 1.13 1.08 1.06 0.933 0.841 0.783 0.758 0.713 0.693 0.675 0.657 0.562 0.521 0.473 0.412 0.368

Plenum Cable 1/2" Fire Retardant Cable, Fire Retardant Jacket (CATVP)
HL4RP-50
Characteristics
Electrical Impedance, ohms 50 2 Maximum Frequency, GHz 6.0 Velocity, percent 88.0 Peak Power Rating, kW 21.0 dc Resistance, ohms/1000 ft (1000 m) Inner 0.45 (1.48) Outer 0.58 (1.90) dc Breakdown, volts 4000 Capacitance, pF/ft (m) 23.0 (75.3) Inductance, H/ft (m) 0.058 (0.191) Mechanical Outer Conductor Copper Inner Conductor Copper-Clad Aluminum Diameter over Jacket, in (mm) 0.61 (15.5) Diameter over Copper Outer Conductor, in (mm) 0.55 (14) Minimum Bending Radius, in (mm) 5 (125) Number of Bends, minimum (typical) 10 (15) Bending Moment, lb-ft (Nm) 3.0 (4.1) Cable Weight, lb/ft (kg/m) 0.18 (0.27) Tensile Strength, lb (kg) 250 (114) Flat Plate Crush, lb/in (kg/mm) 80 (1.4)
540
N Male L4PNM-RC
N Female L4PNF-RC
UHF Male L44P
Connectors
Interface N Male N Male N Male N Male N Female N Female N Female N Female 7-16 DIN Male 7-16 DIN Male 7-16 DIN Male 7-16 DIN Male 7-16 DIN Female 7-16 DIN Female 7-16 DIN Female 7-16 DIN Female 7-16 DIN Female 7/8" EIA Flange 7/8" EIA Flange F Flange Male F Flange Female UHF Male UHF Female HN Male LC Male TNC Female End Terminal Splice Description Hex Head RingFlare Right Angle, Hex Right Angle, Hex Bulk Head Panel Mount RingFlare Right Angle Right Angle RingFlare Bulk Head Bulk Head Panel Mount RingFlare Right Angle Type Number L4PNM-H L4PNM-RC L4PNR-H L4PNR-HC L4PNF L4PNF-BH L4PNF-PM L4PNF-RC L4PDM L4PDR L4PDR-C L4PDM-RC L4PDF L4PDF-BH L4PDF-BHC L4PDF-PM L4PDF-RC L44R 124990-1 L44F 209865 L44P L44U L44J L44M L44NT L44T L44Z Inner Contact Attachment Solder Captivated Solder Captivated Solder Solder Solder Captivated Solder Solder Captivated Captivated Solder Solder Captivated Solder Captivated Solder Solder Solder Solder Solder Solder Solder Solder Solder Solder Solder Outer Contact Attachment Self-Flare RingFlare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare RingFlare Self-Flare Self-Flare Self-Flare RingFlare Self-Flare Self-Flare Self-Flare Self-Flare RingFlare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Plating Code SG SG SG SG SG SG SG SG SS SS SS SS SS SS SS SS SS BB BB BB BS BB BS BB BB BB BB BB Max. Length in (mm) 2.6 (66) 3.0 (75.7) 3.2/1.5 (81/38) 3.2/1.5 (81/38) 2.6 (66) 2.6 (66) 2.6 (66) 2.8 (71) 2.6 (66) 1.8/2.8 (46/72) 1.8/2.8 (46/72) 2.64 (67.1) 2.7 (69) 2.73 (69.4) 2.9 (74) 2.7 (69) 2.8 (71) 3.2 (81) 2.3/1.6 (58/41) 2.3 (58) 2.3 (58) 2.3 (58) 2.3 (58) 2.5 (64) 3.6 (91) 2.8 (71) 4.0 (102) 3.2 (81) Max. Dia. in (mm) 0.95 (24.1) 0.86 (21.8) 0.95 (24.1) 0.91 (23.1) 0.94 (23.9) 0.96 (24.4) 1.0 (25.4) 0.86 (21.8) 1.4 (35.6) 1.41 (35.9) 1.41 (35.9) 0.86 (21.8) 1.1 (27.9) 1.62 (41.1) 1.63 (41.4) 1.2 (29.4) 0.86 (21.8) 2.25 (57.2) 2.25 (57.2) 2.25 (57.2) 2.25 (57.2) 0.91 (23.1) 0.91 (23.1) 0.91 (23.1) 0.91 (23.1) 0.94 (23.9) 0.91 (23.1) 1.1 (27.9)
541
Accessories

see pages 599-607. Standard Hangers Kit of 10. Recommended maximum spacing is 3-ft (1 m). For different spacing recommendations, refer to Cable Hanger Spacing, page 593-598. 43211A Hardware Kit of 10. 3/8" bolts, lockwashers, nuts 3/4" (19mm) long 1" (25mm) long Standard Hoisting Grip 31769-5 31769-1 43094

see pages 617-618. Cold Shrink Weatherproofing Kit 1/2" Coax N Connector to 1/2" Coax N Connector 5/8" Coax to 1/2" Coax 7/8" Coax to 1/2" Coax 1-1/4" or 1-5/8" Coax to 1/2" Coax 2-1/4" Coax to 1/2" Coax 1/2" to 1-1/2" Omni/Panel base Type N or DIN 1/2" LDF4 to Antenna Type N interface Connector/Splice Weatherproofing Kit 241474-4 242475-13 241475-9 241475-5A 241475-8 241548-8 241548-4 221213

kits and our surge protection offerings, see pages 609-616. SureGround Grounding Kit with standard weatherproofing Factory attached one-hole lug, 600 mm (24") lead Factory attached two-hole lug, 600 mm (24") lead Field attached two-hole lug, 1500 mm (59") lead Factory attached one-hole lug, 600 mm (24") lead Factory attached two-hole lug, 600 mm (24") lead Field attached two-hole lug, 1500 mm (59") lead SGL4-06B1 SGL4-06B2 SGL4-15B4 SGPL4-06B1 SGPL4-06B2 SGPL4-15B4


EASIAX Cutting Tool DIN Connector Coupling Torque Wrench N Connector Coupling Torque Wrench 207866 244377 244379
542
1/2" Air Dielectric, High Power High Temperature, HLT Series 50-ohm
HLT4-50T
Description Type No. Frequency MHz 0.5 1 1.5 2 10 20 30 50 88 100 108 150 174 200 300 400 450 500 512 600 700 800 824 894 960 1000 1250 1500 1700 1800 2000 2100 2200 2300 3000 3400 4000 Attenuation dB/100 ft 0.047 0.066 0.081 0.094 0.213 0.305 0.377 0.494 0.669 0.718 0.748 0.896 0.973 1.05 1.32 1.56 1.67 1.78 1.80 1.98 2.17 2.35 2.40 2.52 2.63 2.70 3.10 3.48 3.77 3.91 4.18 4.32 4.45 4.58 5.47 5.95 6.65 Attenuation dB/100 m 0.153 0.217 0.266 0.308 0.700 1.00 1.24 1.62 2.20 2.35 2.45 2.94 3.19 3.45 4.34 5.12 5.48 5.83 5.91 6.50 7.12 7.72 7.86 8.26 8.63 8.85 10.2 11.4 12.4 12.8 13.7 14.2 14.6 15.0 17.9 19.5 21.8 Average Power, kW 21.4 21.4 21.4 21.4 21.4 15.7 12.7 9.72 7.18 6.70 6.42 5.36 4.94 4.57 3.64 3.08 2.88 2.70 2.67 2.43 2.22 2.04 2.01 1.91 1.83 1.78 1.55 1.38 1.28 1.23 1.15 1.11 1.08 1.05 0.881 0.809 0.724

Plenum Cable 1/2" Fire Retardant Cable, Fire Retardant Jacket (CATVP, UL910)
HLT4-50T
Characteristics
Electrical Impedance, ohms 52.5 2 Maximum Frequency, GHz 4.0 Velocity, percent 93.0 Peak Power Rating, kW 21.4 dc Resistance, ohms/1000 ft (1000 m) Inner 0.45 (1.48) Outer 0.58 (1.90) dc Breakdown, volts 3000 Capacitance, pF/ft (m) 20.4 (66.8) Inductance, H/ft (m) 0.058 (0.191) Mechanical Outer Conductor Copper Inner Conductor Copper-Clad Aluminum Diameter over Jacket, in (mm) 0.61 (15.5) Diameter over Copper Outer Conductor, in (mm) 0.55 (14) Diameter Inner Conductor, in (mm) 0.189 (4.8) Minimum Bending Radius, in (mm) 5 (125) Number of Bends, minimum (typical) 10 (15) Bending Moment, lb-ft (Nm) 3.0 (4.1) Cable Weight, lb/ft (kg/m) 0.18 (0.27) Tensile Strength, lb (kg) 250 (114) Flat Plate Crush, lb/in (kg/mm) 100 (1.8)
543
N Male L4PNM-RC
N Female L4PNF-RC
UHF Male L44P
Connectors
Interface N Male N Male N Male N Male N Female N Female N Female N Female 7-16 DIN Male 7-16 DIN Male 7-16 DIN Male 7-16 DIN Male 7-16 DIN Female 7-16 DIN Female 7-16 DIN Female 7-16 DIN Female 7-16 DIN Female 7/8" EIA Flange 7/8" EIA Flange F Flange Male F Flange Female UHF Male UHF Female HN Male LC Male TNC Female End Terminal Splice Description Hex Head RingFlare Right Angle, Hex Right Angle Bulk Head Panel Mount RingFlare Right Angle Right Angle RingFlare Bulk Head Bulk Head Panel Mount RingFlare Right Angle Type Number L4PNM-H L4PNM-RC L4PNR-H L4PNR-HC L4PNF L4PNF-BH L4PNF-PM L4PNF-RC L4PDM L4PDR L4PDR-C L4PDM-RC L4PDF L4PDF-BH L4PDF-BHC L4PDF-PM L4PDF-RC L44R 124990-1 L44F 209865 L44P L44U L44J L44M L44NT L44T L44Z Inner Contact Attachment Solder Captivated Solder Captivated Solder Solder Solder Captivated Solder Solder Captivated Captivated Solder Solder Captivated Solder Captivated Solder Solder Solder Solder Solder Solder Solder Solder Solder Solder Solder Outer Contact Attachment Self-Flare RingFlare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare RingFlare Self-Flare Self-Flare Self-Flare RingFlare Self-Flare Self-Flare Self-Flare Self-Flare RingFlare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Plating Code SG SG SG SG SG SG SG SG SS SS SS SS SS SS SS SS SS BB BB BB BS BB BS BB BB BB BB BB Max. Length in (mm) 2.6 (66) 3.0 (75.7) 3.2/1.5 (81/38) 3.2/1.5 (81/38) 2.6 (66) 2.6 (66) 2.6 (66) 2.8 (71) 2.6 (66) 1.8/2.8 (46/72) 1.8/2.8 (46/72) 2.64 (67.1) 2.7 (69) 2.73 (69.4) 2.9 (74) 2.7 (69) 2.8 (71) 3.2 (81) 2.3/1.6 (58/41) 2.3 (58) 2.3 (58) 2.3 (58) 2.3 (58) 2.5 (64) 3.6 (91) 2.8 (71) 4.0 (102) 3.2 (81) Max. Dia. in (mm) 0.95 (24.1) 0.86 (21.8) 0.95 (24.1) 0.91 (23.1) 0.94 (23.9) 0.96 (24.4) 1.0 (25.4) 0.86 (21.8) 1.4 (35.6) 1.41 (35.9) 1.41 (35.9) 0.86 (21.8) 1.1 (27.9) 1.62 (41.1) 1.63 (41.4) 1.2 (29.4) 0.86 (21.8) 2.25 (57.2) 2.25 (57.2) 2.25 (57.2) 2.25 (57.2) 0.91 (23.1) 0.91 (23.1) 0.91 (23.1) 0.91 (23.1) 0.94 (23.9) 0.91 (23.1) 1.1 (27.9)
544
Accessories
Accessories

see pages 599-607. Standard Hangers Kit of 10. Recommended maximum spacing is 3-ft (1 m). For different spacing recommendations, refer to Cable Hanger Spacing, page 593-598. 43211A Hardware Kit of 10. 3/8" bolts, lockwashers, nuts 3/4" (19 mm) long 1" (25 mm) long Standard Hoisting Grip 31769-5 31769-1 43094

see pages 617-618. Cold Shrink Weatherproofing Kit 1/2" Coax N Connector to 1/2" Coax N Connector 5/8" Coax to 1/2" Coax 7/8" Coax to 1/2" Coax 1-1/4" or 1-5/8" Coax to 1/2" Coax 2-1/4" Coax to 1/2" Coax 1/2" to 1-1/2" Omni/Panel base Type N or DIN 1/2" LDF4 to Antenna Type N interface Connector/Splice Weatherproofing Kit 241474-4 242475-13 241475-9 241475-5A 241475-8 241548-8 241548-4 221213

kits and our surge protection offerings, see pages 609-616. SureGround Grounding Kit with standard weatherproofing Factory attached one-hole lug, 600 mm (24") lead Factory attached two-hole lug, 600 mm (24") lead Field attached two-hole lug, 1500 mm (59") lead Factory attached one-hole lug, 600 mm (24") lead Factory attached two-hole lug, 600 mm (24") lead Field attached two-hole lug, 1500 mm (59") lead SGL4-06B1 SGL4-06B2 SGL4-15B4 SGPL4-06B1 SGPL4-06B2 SGPL4-15B4


EASIAX Cutting Tool DIN Connector Coupling Torque Wrench N Connector Coupling Torque Wrench 207866 244377 244379
545
1/2" Air Dielectric, Plenum Rated (CATVP), HS Series 50-ohm
HS4RP-50

Plenum Cable 1/2" Fire Retardant Cable HS4RP-50
Characteristics
Electrical Impedance, ohms 50 2 Maximum Frequency, GHz 10.2 Velocity, percent 81 Peak Power Rating, kW 15.6 dc Resistance, ohms/1000 ft (1000 m) Inner 0.87 (2.85) Outer 1.00 (3.28) dc Breakdown, volts 2500 Jacket Spark, volts RMS 5000 Capacitance, pF/ft (m) 25.04 (82.16) Inductance, H/ft (m) 0.063 (0.206) Mechanical Outer Conductor Copper Inner Conductor Copper-Clad Aluminum Diameter over Jacket, in (mm) 0.52 (13.2) Diameter over Copper Outer Conductor, in (mm) 0.48 (12.2) Minimum Bending Radius, in (mm) 1.25 (32) Number of Bends, minimum 20 (50) Bending Moment, lb-ft (Nm) 4.5 (6.12) Cable Weight, lb/ft (kg/m) 0.138 (0.205) Tensile Strength, lb (kg) 175 (80) Flat Plate Crush Strength, lb/in (kg/mm) 110 (1.9)
546
N Male F4PNMV2-H
UHF Male 44ASP
7/8" EIA 44ASR
Connectors
Interface N Male N Male N Male N Male N Female N Female N Female 4.1/9.5 DIN Male 4.1/9.5 DIN Male 7-16 DIN Male 7-16 DIN Male 7-16 DIN Male 7-16 DIN Male 7-16 DIN Female 7-16 DIN Female 7-16 DIN Female 7-16 DIN Female 7-16 DIN Female 7-16 DIN Female 7/8" EIA Flange UHF Male UHF Female HN Male SC Male Description Hex Head Hex Head Rt Angle, Hex Hd Bulkhead Rt Angle, Outdoor Use Right Angle Right Angle Bulkhead Panel Mount Bulkhead Panel Mount Type Number F4PNMV2-H F4PNMV2-HC F4PNR-H F4PNR-HC F4PNF F4PNF-C F4PNF-BH F4PKM-C F4PKR-C F4PDMV2-C F4PDMV2 F4PDR F4PDR-C F4PDF-C F4PDF F4PDF-BH F4PDF-PM F4PDF-BHC F4PDF-PMC 44ASR 44ASP 44ASU 44ASJ 44SPCW Inner Contact Attachment Solder Captivated Solder Captivated Solder Captivated Solder Captivated Captivated Captivated Solder Solder Captivated Captivated Solder Solder Solder Captivated Captivated Solder Solder Solder Solder Solder Outer Contact Attachment Crush-Flare Crush-Flare Tab-Flare Crush-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Crush-Flare Crush-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Tab-Flare Tab-Flare Tab-Flare Tab-Flare Tab-Flare Plating Code SG SG SG SG SG SG SG SS SS SS SS SS SS SS SS SS SS SS SS BS BS BS BB SG Max. Length in (mm) 2.13 (54.0) 2.13 (54.0) 3.3/1.5 (84/38) 2.8 (71.9)/1.6 (41.5) 2.3 (53.3) 2.3 (53.3) 2.3 (58) 2.0 (50) 2.3/1.5 (57/38) 1.98 (50.2) 2.10 (53.4) 2.4.1.8 (61/46) 2.1/2.0 (53/50) 2.0 (50) 2.0 (50) 2.01 (51.1) 2.01 (51.1) 2.0 (50) 2.0 (50) 3.3 (84) 2.1 (53) 2.3 (58) 2.4 (61) 2.7 (69) Max. Dia. in (mm) 0.94 (23.8) 0.94 (23.8) 0.86 (21.8) 1 (25.7) 0.88 (22.4) 0.88 (22.4) 0.95 (24.1) 0.95 (24.1) 0.95 (24.1) 1.05 (26.7) 1.05 (26.7) 1.4 (35.6) 1.4 (35.6) 1.1 (27.9) 1.1 (27.9) 1.50 (38) 1.26 (32) 1.8 (45.7) 1.3 (33) 1.4 (35.6) 0.84 (21.3) 0.84 (21.3) 0.84 (21.3) 0.88 (22.4)
547
Accessories



Standard Cable Entry Boots One Hole: Three Hole: Four Hole: 4" Boots 204679A-5 204679A-7 204679A-16 5" Boots 48939A-6 48939A-8 48939A-17

kits and our surge protection offerings, see pages 609-616. Standard Grounding Kits Factory attached one-hole lug 24" Factory attached two-hole lug 24" Field attached two-hole lug 60" 204989-1 241088-1 241545

548
1/2" High Power, High Temperature, Plenum Rated Air Dielectric, HST Series 50-ohm
HST4-50

High Power, High Temperature, Plenum Cable 1/2" Cable HST4-50
Characteristics
Electrical Impedance, ohms 50 2 Maximum Frequency, GHz 10.2 Velocity, percent 81 Peak Power Rating, kW 15.6 dc Resistance, ohms/1000 ft (1000 m) Inner 0.87 (2.85) Outer 1.00 (3.28) dc Breakdown, volts 2500 Jacket Spark, volts RMS 4000 Capacitance, pF/ft (m) 25.04 (82.16) Inductance, H/ft (m) 0.063 (0.206) Mechanical Outer Conductor Copper Inner Conductor Silver Plated, Copper-Clad Aluminum Diameter over Jacket, in (mm) 0.52 (13.2) Diameter over Copper Outer Conductor, in (mm) 0.48 (12.2) Minimum Bending Radius, in (mm) 1.25 (32) Number of Bends, minimum 20 (50) Bending Moment, lb-ft (Nm) 4.57 (6.22) Cable Weight, lb/ft (kg/m) 0.165 (0.245) Tensile Strength, lb (kg) 175 (80) Flat Plate Crush Strength, lb/in (kg/mm) 110 (1.9)
549
N Male F4PNMV2-H
UHF Male 44ASP
7/8" EIA 44ASR
Connectors
Interface N Male N Male N Male N Male N Female N Female N Female 4.1/9.5 DIN Male 4.1/9.5 DIN Male 7-16 DIN Male 7-16 DIN Male 7-16 DIN Male 7-16 DIN Male 7-16 DIN Female 7-16 DIN Female 7-16 DIN Female 7-16 DIN Female 7-16 DIN Female 7-16 DIN Female 7/8" EIA Flange UHF Male UHF Female HN Male SC Male Description Hex Head Hex Head Rt Angle, Hex Hd Bulkhead Rt Angle, Outdoor Use Right Angle Right Angle Bulkhead Panel Mount Bulkhead Panel Mount Type Number F4PNMV2-H F4PNMV2-HC F4PNR-H F4PNR-HC F4PNF F4PNF-C F4PNF-BH F4PKM-C F4PKR-C F4PDMV2-C F4PDMV2 F4PDR F4PDR-C F4PDF-C F4PDF F4PDF-BH F4PDF-PM F4PDF-BHC F4PDF-PMC 44ASR 44ASP 44ASU 44ASJ 44SPCW Inner Contact Attachment Solder Captivated Solder Captivated Solder Captivated Solder Captivated Captivated Captivated Solder Solder Captivated Captivated Solder Solder Solder Captivated Captivated Solder Solder Solder Solder Solder Outer Contact Attachment Crush-Flare Crush-Flare Tab-Flare Crush-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Crush-Flare Crush-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Tab-Flare Tab-Flare Tab-Flare Tab-Flare Tab-Flare Plating Code SG SG SG SG SG SG SG SS SS SS SS SS SS SS SS SS SS SS SS BS BS BS BB SG Max. Length in (mm) 2.13 (54.0) 2.13 (54.0) 3.3/1.5 (84/38) 2.8 (71.9)/1.6 (41.5) 2.3 (53.3) 2.3 (53.3) 2.3 (58) 2.0 (50) 2.3/1.5 (57/38) 1.98 (50.2) 2.10 (53.4) 2.4.1.8 (61/46) 2.1/2.0 (53/50) 2.0 (50) 2.0 (50) 2.01 (51.1) 2.01 (51.1) 2.0 (50) 2.0 (50) 3.3 (84) 2.1 (53) 2.3 (58) 2.4 (61) 2.7 (69) Max. Dia. in (mm) 0.94 (23.8) 0.94 (23.8) 0.86 (21.8) 1 (25.7) 0.88 (22.4) 0.88 (22.4) 0.95 (24.1) 0.95 (24.1) 0.95 (24.1) 1.05 (26.7) 1.05 (26.7) 1.4 (35.6) 1.4 (35.6) 1.1 (27.9) 1.1 (27.9) 1.50 (38) 1.26 (32) 1.8 (45.7) 1.3 (33) 1.4 (35.6) 0.84 (21.3) 0.84 (21.3) 0.84 (21.3) 0.88 (22.4)
550
Accessories



Standard Cable Entry Boots One Hole: Three Hole: Four Hole: 4" Boots 204679A-5 204679A-7 204679A-16 5" Boots 48939A-6 48939A-8 48939A-17

kits and our surge protection offerings, see pages 609-616. Standard Grounding Kits Factory attached one-hole lug 24" Factory attached two-hole lug 24" Field attached one-hole lug 36" Field attached two-hole lug 60" 204989-1 241088-1 204989-21 241545

551
HJ4.5-50
Description Type No. Frequency MHz 0.5 1 1.5 2 10 20 30 50 88 100 108 150 200 300 400 450 500 600 700 800 824 894 960 1000 1250 1500 2000 3000 4000* 5000 6000 6600 Attenuation dB/100 ft 0.034 0.048 0.058 0.067 0.152 0.215 0.264 0.343 0.457 0.488 0.508 0.602 0.699 0.863 1.00 1.07 1.13 1.24 1.35 1.45 1.47 1.54 1.60 1.64 1.85 2.04 2.40 3.01 3.55 4.04 4.49 4.75 Attenuation dB/100 m 0.110 0.156 0.192 0.221 0.497 0.706 0.867 1.12 1.50 1.60 1.67 1.98 2.29 2.83 3.29 3.51 3.71 4.09 4.43 4.76 4.85 5.05 5.25 5.37 6.07 6.70 7.86 9.89 11.6 13.3 14.8 15.6 Average Power, kW 40.0 40.0 40.0 35.30 15.64 10.98 8.94 6.90 5.17 4.84 4.65 3.92 3.38 2.73 2.35 2.20 2.09 1.89 1.74 1.62 1.59 1.52 1.47 1.43 1.27 1.16 0.986 0.784 0.665 0.585 0.525 0.496

Standard and Fire Retardant Cables 5/8" Standard Cable, Standard Jacket 5/8" Fire Retardant Jacket (CATVR) Low VSWR and Specialized Cables 5/8" Low VSWR, specify operating band Cable for Cellular, standard jacket 824-960 MHz, 1.20 VSWR, max. 880-960 MHz, 1.10 VSWR, max.
** Insert suffix number from Low VSWR Specifications table.
HJ4.5-50 HJ4.5RN-50 HJ4.5P-50-(**) HJ4.5P-50-1 HJ4.5P-50-2
Characteristics
Electrical Impedance, ohms Maximum Frequency, GHz Velocity, percent Peak Power Rating, kW dc Resistance, ohms/1000 ft (1000 m) Inner Outer dc Breakdown, volts Jacket Spark, volts RMS Capacitance, pF/ft (m) Inductance, H/ft (m) Mechanical Outer Conductor Inner Conductor Diameter over Jacket, in (mm) Diameter over Copper Outer Conductor, in (mm) Diameter Inner Conductor, in (mm) Nominal Inside Transverse Dimensions (cm) Minimum Bending Radius, in (mm) Number of Bends, minimum (typical) Bending Moment, lb-ft (Nm) Cable Weight, lb/ft (kg/m) Tensile Strength, lb (kg) Flat Plate Crush Strength, lb/in (kg/mm) 50 1 6.6 92 40 0.41 (1.35) 0.23 (0.75) 4000 5500 22.3 (73.2) 0.056 (0.182) Copper Copper 0.875 (22.2) 0.775 (19.7) 0.272 (6.9) 1.51 7 (180) 15 (20) 16 (21.7) 0.40 (0.59) 750 (340) 250 (4.5)
Standard Conditions: For Attenuation. VSWR 1.0 ambient temperature 20C (68F), atmospheric pressure, dry air. For Average Power. VSWR 1.0, inner temperature 100C (212F), ambient temperature 40C (104F), atmospheric pressure, dry air, no solar loading. * Operation of this cable in the 4250-4400 MHz band is not recommended because of VSWR spikes produced by the dielectric spacing.
552
N Male H4.5PNM
7-16 DIN Male H4.5PDM
Connectors
Interface N Male 7-16 DIN Male Splice Description Type Number H4.5PNM H4.5PDM 85Z Inner Contact Attachment Spring Finger Spring Finger Self-tapping Outer Contact Attachment Self Flare Self Flare Self Flare Plating Code SG SS BB Max. Length in (mm) 2.6 (66) 2.8 (71) 3.1 (79) Max. Dia. in (mm) 1.3 (33) 1.3 (33) 1.6 (41)
Plating Codes: BB - Brass Body and Pin, SG - Silver Plated Body and Gold Plated Pin, SS - Silver Plated Body and Pin.
Type Number Bulkhead Adapter, for N or UHF Females 26016-2
Low VSWR Specifications, Type HJ4.5-50-( )

Frequency Band, GHz 0.824-0.960 0.880-0.960 0.940-2.7 0.010-0.806 0.010-2.7 0.010-4.2 4.4-6.6 Type No. HJ4.5P-50-1 HJ4.5P-50-2 HJ4.5P-50-3 HJ4.5P-50-4 HJ4.5P-50-5 HJ4.5P-50-6 HJ4.5P-50-7 Using Connector Type** N Plug: H4.5PNM 7-16 DIN male: H4.5PDM N Plug: H4.5PNM 7-16 DIN male: H4.5PDM N Plug: H4.5PNM 7-16 DIN male: H4.5PDM N Plug: H4.5PNM 7-16 DIN male: H4.5PDM N Plug: H4.5PNM 7-16 DIN male: H4.5PDM N Plug: H4.5PNM 7-16 DIN male: H4.5PDM N Plug: H4.5PNM 7-16 DIN male: H4.5PDM 1-25 ft (0.3-8 m) 1.20 (20.8) 1.20 (20.8) 1.10 (26.4) 1.10 (26.4) 1.20 (20.8) 1.20 (20.8) 1.25 (19.1) 1.25 (19.1) 1.25 (19.1) 1.25 (19.1) 1.30 (17.6) 1.30 (17.6) 1.30 (17.6) 1.30 (17.6) Assembly VSWR, Maximum (R.L., dB) 25-100 ft 100-200 ft 200-500 ft (8-30 m) (30-60 m) (60-150 m) 1.20 (20.8) 1.20 (20.8) 1.10 (26.4) 1.10 (26.4) 1.20 (20.8) 1.20 (20.8) 1.25 (19.1) 1.25 (19.1) 1.25 (19.1.) 1.25 (19.1.) 1.35 (16.5) 1.35 (16.5) 1.35 (16.5) 1.35 (16.5) 1.20 (20.8) 1.20 (20.8) 1.10 (26.4) 1.10 (26.4) 1.25 (19.1) 1.25 (19.1) 1.30 (17.6) 1.30 (17.6) 1.35 (16.5) 1.35 (16.5) 1.40 (15.6) 1.40 (15.6) 1.40 (15.6) 1.40 (15.6) 1.20 (20.8) 1.20 (20.8) 1.10 (26.4) 1.10 (26.4) 1.25 (19.1) 1.25 (19.1) 1.30 (17.6) 1.30 (17.6) 1.35 (16.5) 1.35 (16.5) 1.50 (19.9) 1.50 (19.9) 1.50 (19.9) 1.50 (19.9) Above 500 ft (150 m) 1.20 (20.8) 1.20 (20.8) 1.10 (26.4) 1.10 (26.4) 1.25 (19.1) 1.25 (19.1) 1.30 (17.6) 1.30 (17.6) 1.35 (16.5) 1.35 (16.5) 1.50 (19.9) 1.50 (19.9) 1.50 (19.9) 1.50 (19.9)
* Connectors ordered separately. VSWR values are guaranteed for factory fit assemblies and are typical for field cut lengths. If two different connector interfaces are selected, the higher VSWR value is guaranteed.
553
Accessories

see pages 599-607. Standard Hangers Kit of 10. Recommended maximum spacing is 3 ft (1 m). For different spacing recommendations, refer to Cable Hanger Spacing, page 593-598. 42396A-9 Hardware Kit of 10. 3/8" bolts, lockwashers, nuts 3/4" (19 mm) long 1" (25 mm) long 31769-5 31769-1

kits and our surge protection offerings, see pages 609-616. SureGround Grounding Kit with standard weatherproofing Factory attached one-hole lug, 600 mm (24") lead Factory attached two-hole lug, 600 mm (24") lead Field attached two hole lug, 1500 mm (59") lead Standard Grounding Kit with standard weatherproofing Factory attached one-hole lug, 24" (610 mm) lead Factory attached two-hole lug, 24" (610 mm) lead Field attached two hole lug, 59" (1500 mm) lead 204989-2 241088-2 220497 SGL45-06B1 SGL45-06B2 SGL45-15B4
Snap-in Hangers Kit of 10. For prepunched 3/4" (19 mm) holes on tower member or adapters. Recommended maximum spacing is 3-ft (1 m). For different spacing recommendations, refer to Cable Hanger Spacing, page 593-598. 206706-6 Click-On Hangers Kit of 10. Recommended maximum spacing is 3-ft. Mounting Hardware see page 605 Standard Hoisting Grip L45CLICK 29958


554
HJ5-50
Description Type No. Frequency MHz 0.5 1 1.5 2 10 20 30 50 88 100 108 150 174 200 300 400 450 500 512 600 700 800 824 894 960 1000 1250 1500 1700 2000 2300 3000 4000 5000 5200 Attenuation dB/100 ft 0.0250 0.0355 0.0435 0.0503 0.113 0.161 0.198 0.258 0.346 0.369 0.385 0.457 0.494 0.532 0.661 0.772 0.823 0.871 0.883 0.963 1.05 1.13 1.15 1.20 1.25 1.28 1.45 1.61 1.73 1.91 2.07 2.43 2.89 3.32 3.40 Attenuation dB/100 m 0.0822 0.116 0.143 0.165 0.372 0.529 0.651 0.846 1.13 1.21 1.26 1.50 1.62 1.75 2.17 2.53 2.70 2.86 2.90 3.16 3.44 3.71 3.77 3.94 4.11 4.20 4.77 5.29 5.69 6.26 6.79 7.96 9.48 10.9 11.2 Average Power, kW 90.0 78.4 63.9 55.3 24.5 17.3 14.0 10.8 8.05 7.53 7.23 6.09 5.63 5.23 4.21 3.60 3.38 3.19 3.15 2.89 2.65 2.46 2.42 2.31 2.22 2.17 1.91 1.72 1.60 1.46 1.34 1.15 0.963 0.839 0.818

Standard and Fire Retardant Cables Maximum VSWR 1.20 (824-960 and 1850-1990 MHz) 7/8" Standard Cable, Standard Jacket HJ5-50* 7/8" Fire Retardant Jacket (CATVP) HJ5RP-50* 7/8" Fire Retardant Jacket (CATVR) HJ5RN-50* Low VSWR and Specialized Cables 7/8" Low VSWR, specify operating band HJ5P-50-(**) Cable for Cellular, standard jacket 824-960 or 1850-1990 MHz, 1.10 VSWR, max. 25831-7
* For broadcast applications, specify channel and frequency. **Insert suffix number from Low VSWR Specifications table, page 557.
Characteristics
Electrical Impedance, ohms Maximum Frequency, GHz Velocity, percent Peak Power Rating, kW dc Resistance, ohms/1000 ft (1000 m) Inner Outer dc Breakdown, volts Jacket Spark, volts RMS Capacitance, pF/ft (m) Inductance H/ft (m) Mechanical Outer Conductor Inner Conductor Diameter over Jacket, in (mm) Diameter over Copper Out Conductor, in (mm) Diameter Inner Conductor, in (mm) Nominal Inside Transverse Dimensions (cm) Minimum Bending Radius, in (mm) Number of Bends, minimum (typical) Bending Moment, lb-ft (Nm) Cable Weight, lb/ft (kg/m) Tensile Strength, lb (kg) Flat Plate Crush Strength, lb/in (kg/mm) 50 0.5 5.2 91.6 90 0.25 (0.82) 0.20 (0.66) 6000 8000 22.2 (72.8) 0.055 (0.180) Copper Copper 1.11 (28.2) 1.01 (25.7) 0.359 (9.1) 2.02 10 (250) 15 (20) 25 (34) 0.54 (0.80) 800 (360) 250 (4.5)
Standard Conditions: For Attenuation. VSWR 1.0, ambient temperature 20C (68F), atmospheric pressure, dry air. For average Power. VSWR 1.0 inner temperature 100C (212F), ambient temperature 40C (104F), atmospheric pressure, dry air, no solar loading. Contact Andrew for information on operation in the 3050-3200 MHz band.
555
N Female H5PNF
N Female H5NF-T
7/8" EIA Flange 75AR
7-16 DIN Male H5PDM
7-16 DIN Female H5PDF
N Male H5PNM
Connectors
Interface N Male N Male N Female N Female 7-16 DIN Male 7-16 DIN Female 7/8" EIA Flange 7/8" EIA Flange 7/8" EIA Flange 7/8" EIA Flange 1-5/8" EIA Flange UHF Female LC Male End Terminal Splice Description Tunable Tunable Gas Pass Gas Pass, Tunable Gas Barrier Gas Barrier, Tunable Gas Pass/Barrier Type Number H5PNM H5NM-T H5PNF H5NF-T H5PDM H5PDF 75AR 75ART H5MB-014 75AGT H5MPB-110 75AU 75AM 75AT 75AZ Reference* 75AG Inner Contact Attachment Self-tapping Self-tapping Self-tapping Self-tapping Spring Finger Spring Finger Self-tapping Self-tapping Self-tapping Self-tapping Self-tapping Self-tapping Self-tapping Self-tapping Self-tapping Outer Contact Attachment Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Plating Code SG BB SG BB SS SS BB BB BB BB BS BS BB BB BB Max. Length in (mm) 3.5 (89) 8.5 (216) 3.4 (86) 8.2 (208) 2.8 (71) 2.8 (71) 3.7 (94) 5.9 (150) 3.7 (94) 5.9 (150) 5.2 (132) 3.4 (86) 5.0 (127) 5.1 (130) 4.2 (107) Max. Dia. in (mm) 1.4 (36) 1.4 (36) 1.4 (36) 1.4 (36) 1.4 (36) 1.4 (36) 2.25 (57) 2.25 (57) 2.25 (57) 2.25 (57) 3.5 (89) 1.4 (36) 1.4 (36) 1.4 (36) 1.4 (36)
Plating Codes: BB - Brass Body and Pin, BS - Brass Body and Silver Plated Pin, SG - Silver Plated Body and Gold Plated Pin, SS - Silver Plated Body and Pin * Previous Type Number.
Type Number Connector Reattachment Kit For H5PNF, H5PNM, 75AR, 75PN, 75PW For 75AG, 75AU For 75ART, 75AGT For H5NF-T, 75NT Bulkhead Adapter, for N or UHF Females 90, 7/8" EIA Miter Elbow, includes one inner connector 34767A-3 34767A-5 34767A-44 34767A-18 26016-2 1060A
556
Terrestrial Microwave Low VSWR Specifications

Frequency Band, GHz 1.7-1.9 1.85-1.99 2.11-2.2 1.7-2.11 1.9-2.3 2.3-2.7 3.625-4.2 Type Number HJ5P-50-17L HJ5P-50-18 HJ5P-50-21 HJ5P-50-17 HJ5P-50-19 HJ5P-50-23W HJ5P-50-36 7/8" EIA No Gas Barrier 75ART 75ART 75ART 75ART 75ART 75ART Recommended Connectors 7/8" EIA Gas Barrier Type N Plug 75AGT 75AGT 75AGT 75AGT 75AGT 75AGT H5NM-T H5NM-T H5NM-T H5NM-T H5NM-T H5NM-T H5PNM Type N Jack H5NF-T H5NF-T H5NF-T H5NF-T H5NF-T H5NF-T H5PNF VSWR, max. (R.L.) 1.08 (28.3) 1.08 (28.3) 1.08 (28.3) 1.08 (28.3) 1.08 (28.3) 1.08 (28.3) 1.20 (20.8)
VSWR values are guaranteed for factory fit assemblies and are typical for field cut lengths. If two different connector interfaces are selected, the higher VSWR value is guaranteed.
Accessories

see pages 599-607. Standard Hangers Kit of 10. Recommended maximum spacing is 3 ft (1 m). For different spacing recommendations, refer to Cable Hanger Spacing, pages 593-598. 42396A-5 Hardware Kit of 10. 3/8" bolts, lockwashers, nuts 3/4" (19 mm) long 1" (25 mm) long Click-On Hangers Kit of 10. Recommended maximum spacing is 3-ft (1 m). Mounting Hardware see page 605. Standard Hoisting Grip 31769-5 31769-1 L5CLICK 19256B

kits and our surge protection offerings, see pages 609-616. SureGround Grounding Kit with standard weatherproofing Factory attached one-hole lug, 600mm (24") lead Factory attached two-hole lug, 600mm (24") lead Field attached two hole lug, 2000mm (79") lead SGL5-06B1 SGL5-06B2 SGL5-20B4

see pages 617, 618. Connector/Splice Weatherproofing Kit 221213
Entry Systems For entry systems offerings see pages 619, 620.
557
7/8" High Power, High Temperature, Air Dielectric, HT Series 50-ohm
HT5-50

Standard Cable 7/8" Standard Cable, Unjacketed HT5-50
Characteristics
Electrical Impedance, ohms Maximum Frequency, GHz Velocity, percent Peak Power Rating, kW dc Resistance, ohms/1000 ft (1000 m) Inner Outer dc Breakdown, volts Capacitance, pF/ft (m) Inductance, H/ft (m) Mechanical Outer Conductor Inner Conductor Diameter over Copper Outer Conductor, in (mm) Minimum Bending Radius, in (mm) Number of Bends, minimum (typical) Bending Moment, lb-ft (Nm) Cable Weight, lb/ft (kg/m) Tensile Strength, lb (kg) Flat Plate Crush Strength, lb/in (kg/mm) 50 1 5.2 92.5 90 0.25 (0.82) 0.20 (0.66) 6000 21.7 (71.2) 0.055 (0.182) Copper Copper Tube 1.01 (25.5) 10 (250) 15 (30) 29 (39.3) 0.45 (0.67) 800 (360) 240 (4.3)
Standard Conditions: For Attenuation. VSWR 1.0, ambient temperature 20C (68F), atmospheric pressure, dry air. For average power, VSWR 1.0 inner temperature 200C (392F), ambient temperature 40C (104F) atmospheric pressure, dry air, no solar loading. Operation of this cable in the 3550-3700 MHz band is not recommended because of VSWR spikes produced by the dielectric section spacing.
558
N Female H5PNF
7-16 DIN Male H5PDM
7-16 DIN Female H5PDF
7/8" EIA Flange 75AR
N Male H5PNM
Connectors
Interface Description Type Number H5PNM H5NF-T H5PDM H5PDF 75AR H5MB-014 75AU 75AM 75AT 75AZ Reference* 75AG Inner Contact Attachment Self-tapping Self-tapping Spring Finger Spring Finger Self-tapping Self-tapping Self-tapping Self-tapping Self-tapping Self-tapping Outer Contact Attachment Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Plating Code SG BB SS SS BB BB BS BB BB BB Max. Length in (mm) 3.5 (89) 8.2 (208) 2.8 (71) 2.8 (71) 3.7 (94) 3.7 (94) 3.4 (86) 5.0 (127) 5.1 (130) 4.2 (107) Max. Dia. in (mm) 1.4 (36) 1.4 (36) 1.4 (36) 1.4 (36) 2.25 (57) 2.25 (57) 1.4 (36) 1.4 (36) 1.4 (36) 1.4 (36)
N Male N Female Tunable 7-16 DIN Male 7-16 DIN Female 7/8" EIA Flange Gas Pass 7/8" EIA Flange Gas Barrier UHF Female LC Male End Terminal Splice
Plating Codes: BB - Brass Body and Pin, BS - Brass Body and Silver Plated Pin, SG - Silver Plated Body and Gold Plated Pin, SS - Silver Plated Body and Pin * Previous Type Number.
Accessories
Type Number Connector Reattachment Kit For H5PNF, H5PNM, 75AR, 75PN, 75PW For 75AG, 75AU For 75ART, 75AGT For H5NF-T, 75NT Bulkhead Adapter, for N or UHF Females 90, 7/8" EIA Miter Elbow, includes one inner connector 34767A-3 34767A-5 34767A-44 34767A-18 26016-2 1060A

see pages 599-607. Standard Hangers Kit of 10. Recommended maximum spacing is 3 ft (1 m). For different spacing recommendations, refer to Cable Hanger Spacing, pages 593-598. 42396A-5 Hardware Kit of 10. 3/8" bolts, lockwashers, nuts 3/4" (19 mm) long 31769-5 1" (25 mm) long 31769-1 Standard Hoisting Grip 19256B
Accessories

kits and our surge protection offerings, see pages 609-616. SureGround Grounding Kit with standard weatherproofing Factory attached one-hole lug, 600 mm (24") lead SGL5-06B1 Factory attached two-hole lug, 600 mm (24") lead SGL5-06B2 Field attached two hole lug, 1500 mm (59") lead SGL5-15B4

559
1-5/8" Air Dielectric, HJ Series 50-ohm
HJ7-50A

Standard and Fire Retardant Cables Maximum VSWR 1.20 (824-960 and 1850-1990 MHz) 1-5/8" Standard Cable, Standard Jacket HJ7-50A 1-5/8" Fire Retardant Jacket (CATVP) HJ7RP-50A 1-5/8" Fire Retardant Jacket (CATVR) HJ7RN-50A Enhanced Power Cable 1-5/8" Cable with Polyolefin Dielectric for 25% increase in power ratings 27591-101 Low VSWR and Specialized Cables 1-5/8" Low VSWR, specify operating band HJ7P-50A-(**) 1-5/8" Low VSWR, specify operating band HJ7SP-50A-(**) Cable for Cellular, standard jacket 824-960 or 1850-1990 MHz, 1.10 VSWR, max. 25816A-33 Broadcast, Low VSWR 54-216 MHz, 1.05 VSWR, max. over broadcast channel 470-740 MHz, 1.08 VSWR, max. over broadcast channel 740-856 MHz, 1.10 VSWR, max. over broadcast channel 42140*
* For broadcast applications, specify channel and frequency. **Insert suffix number from Low VSWR Specifications table.

Frequency MHz 0.5 1 1.5 2 10 20 30 50 88 100 108 150 174 200 300 400 450 500 512 600 700 800 824 894 960 1000 1250 1700 2000 2300 2700 Attenuation dB/100 ft 0.0138 0.0195 0.0239 0.0277 0.0623 0.0887 0.109 0.142 0.190 0.203 0.211 0.251 0.271 0.292 0.363 0.423 0.451 0.478 0.484 0.528 0.575 0.619 0.629 0.658 0.685 0.701 0.795 0.948 1.04 1.13 1.24 Attenuation dB/100 m 0.0452 0.0641 0.0785 0.0908 0.205 0.291 0.358 0.465 0.623 0.666 0.693 0.823 0.890 0.958 1.19 1.39 1.48 1.57 1.59 1.73 1.89 2.03 2.06 2.16 2.25 2.30 2.61 3.11 3.42 3.71 4.08 Average Power, kW 243 171.8 140.2 121.3 53.8 37.8 30.8 23.7 17.7 16.5 15.9 13.4 12.4 11.5 9.25 7.93 7.44 7.02 6.93 6.36 5.84 5.42 5.33 5.10 4.90 4.79 4.22 3.54 3.22 2.97 2.70
Characteristics
Electrical Impedance, ohms Maximum Frequency, GHz Velocity, percent Peak Power Rating, kW dc Resistance, ohms/1000 ft (1000 m) Inner Outer dc Breakdown, volts Jacket Spark, volts RMS Capacitance, pF/ft (m) Inductance, H/ft (m) Mechanical Outer Conductor Inner Conductor Diameter over Jacket, in (mm) Diameter over Copper Outer Conductor, in (mm) Diameter Inner Conductor, in (mm) Nominal Inside Transverse Dimensions (cm) Minimum Bending Radius, in (mm) Number of Bends, minimum (typical) Bending Moment, lb-ft (Nm) Cable Weight, lb/ft (kg/m) Tensile Strength, lb (kg) Flat Plate Crush Strength, lb/in (kg/mm) 50 0.5 2.7 92.1 305 0.22 (0.72) 0.10 (0.33) 11000 10000 22.1 (72.4) 0.055 (0.181) Copper Copper 1.98 (50.3) 1.83 (46.5) 0.713 (18.1) 3.99 20 (510) 15 (30) 30 (40.7) 1.04 (1.55) 750 (340) 175 (3.1)
Standard Conditions: For Attenuation. VSWR 1.0 ambient temperature 20C (68F), atmospheric pressure, dry air. For Average Power, VSWR 1.0, inner temperature 100C (212F), ambient temperature 40C (104F), atmospheric pressure, dry air, no solar loading.
560
N Female H7PNF
7-16 DIN Male H7PDM
1-5/8" EIA Flange 87G
7/8" EIA Flange H7MP-014
Connectors
Interface N Male N Female N Female 7-16 DIN Male 7-16 DIN Female 1-5/8" EIA Flange 1-5/8" EIA Flange 7/8" EIA Flange 7/8" EIA Flange 7/8" EIA Flange 7/8" EIA Flange LC Female End Terminal Splice Description Tunable Tunable Gas Pass Gas Block Gas Pass Gas Pass, Tunable Gas Block Gas Block, Tunable Type Number H7NM-T H7PNF H7NF-T H7PDM H7PDF 87R 87G H7MP-014 87ST H7MB-014 87SGT 87L 87T 87Z Reference* 87S 87SG Inner Contact Attachment Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Outer Contact Attachment Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Plating Code BB SG BB SS SS BS BS BS BS BS BS BB BB BB Max. Length in (mm) 11.6 (295) 4.1 (104) 11.4 (290) 4.2 (107) 4.2 (107) 4.8 (122) 5.7 (145) 5.6 (142) 11.8 (300) 5.6 (142) 12.2 (310) 4.9 (124) 7.0 (178) 5.9 (150) Max. Dia. in (mm) 2.4 (61) 2.4 (61) 2.4 (61) 2.7 (69) 2.7 (69) 3.5 (89) 3.5 (89) 2.4 (61) 2.4 (61) 2.4 (61) 2.4 (61) 2.4 (61) 2.4 (61) 2.4 (61)
Plating Codes: BB - Brass Body and Pin, BS - Brass Body and Silver Plated Pin (inner connector), SG - Silver Plated Body and Gold Plated Pin, SS - Silver Plated Body and Pin * Previous Type Number. Includes inner.
Type Number Connector Reattachment Kit For 87G, 87R For H7PNF, 87PN, H7MP-014, H7MB-014 For 87SGT, 87ST For H7NF-T, H7NM-T, 87NT, 87WT For 87Z 7/8" EIA Gas Barrier 1-5/8" EIA Gas Barrier 1-5/8" EIA End Terminal, for strap connection to center conductor, includes inner connector. Use with 87R 1-5/8" Inner Connector, with anchor bead 1-5/8" EIA 90 Miter Elbow, includes one inner connector 34767A-6 34767A-7 34767A-20 34767A-19 34767A-13 1260A 1261B
2061 34660 1061A
561

Frequency Band, GHz P Series 1.7-1.9 1.85-1.99 2.11-2.2 1.7-2.11 1.9-2.3 2.3-2.7 SP Series 1.7-1.9 1.85-1.99 2.11-2.2 1.7-2.11 1.9-2.3 HJ7SP-50A-17L HJ7SP-50A-18 HJ7SP-50A-21 HJ7SP-50A-17 HJ7SP-50A-19 87ST 87ST 87ST 87ST 87ST 87SGT 87SGT 87SGT 87SGT 87SGT H7NM-T H7NM-T H7NM-T H7NM-T H7NM-T H7NF-T H7NF-T H7NF-T H7NF-T H7NF-T 1.10 (26.4) 1.12 (24.8) 1.10 (26.4) 1.12 (24.8) 1.10 (26.4) 1.12 (24.8) 1.10 (26.4) 1.12 (24.8) 1.10 (26.4) 1.12 (24.8) HJ7P-50A-17L HJ7P-50A-18 HJ7P-50A-21 HJ7P-50A-17 HJ7P-50A-19 HJ7P-50A-23W 87ST H7MP-014* H7MP-014* 87ST 87ST 87ST 87SGT H7MB-014* H7MB-014* 87SGT 87SGT 87SGT H7NM-T H7NM-T H7NM-T H7NM-T H7NM-T H7NM-T H7NF-T H7NF-T H7NF-T H7NF-T H7NF-T H7NF-T 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) Type Number 7/8" EIA No Gas Barrier Recommended Connectors 7/8" EIA Gas Barrier Type N Plug Type N Jack VSWR, max. (R.L.)
* Tunable connector may be used. VSWR values are guaranteed for factory fit assemblies and are typical for field cut lengths. If two different connector interfaces are selected, the higher VSWR value is guaranteed.
Accessories

see pages 599-607. Standard Hangers Kit of 10. Recommended maximum spacing is 3 ft (1 m). For different spacing recommendations, refer to Cable Hanger Spacing, pages 593-598. 42396A-2 Hardware Kit of 10. 3/8" bolts, lockwashers, nuts 3/4" (19 mm) long 31769-5 1" (25 mm) long 31769-1 Click-On Hangers Kit of 10. Recommended maximum spacing is 3-ft (1 m). L7CLICK Mounting Hardware see page 605. Standard Hoisting Grip 24312A


562
2-1/4" Air Dielectric, HJ Series 50-ohm
HJ12-50

Standard and Fire Retardant Cables Maximum VSWR 1.20 (824-960 and 1850-1990 MHz) 2-1/4" Standard Cable, Standard Jacket HJ12-50 2-1/4" Fire Retardant Jacket (CATVR) HJ12RN-50 Low VSWR and Specialized Cables 2-1/4" Low VSWR, specify operating band HJ12P-50-(**) Cable for Cellular, standard jacket 824-960 MHz 1.10 VSWR, max. 207760-3 Broadcast, Low VSWR 54-216 MHz, 1.05 VSWR, max. over broadcast channel 470-740 MHz, 1.08 VSWR, max. over broadcast channel 740-856 MHz, 1.10 VSWR, max. over broadcast channel 207761*
* For broadcast applications, specify channel and frequency. **Insert suffix number from Low VSWR Specifications table.

Frequency MHz 0.5 1 1.5 2 10 20 30 50 88 100 108 150 174 200 300 400 450 500 512 600 700 800 824 894 960 1000 1250 1500 1700 2000 2300 Attenuation dB/100 ft 0.0114 0.0162 0.0198 0.0229 0.0517 0.0736 0.0906 0.118 0.158 0.169 0.176 0.209 0.226 0.244 0.303 0.354 0.378 0.400 0.405 0.442 0.482 0.519 0.528 0.553 0.576 0.589 0.669 0.744 0.800 0.880 0.956 Attenuation dB/100 m 0.0375 0.0531 0.0651 0.0752 0.170 0.242 0.297 0.387 0.519 0.555 0.577 0.686 0.743 0.800 0.994 1.16 1.24 1.31 1.33 1.45 1.58 1.70 1.73 1.81 1.89 1.93 2.20 2.44 2.62 2.89 3.14 Average Power, kW 342 241.2 196.8 170.2 75.5 53.0 43.1 33.1 24.7 23.1 22.2 18.7 17.2 16.0 12.9 11.0 10.3 9.76 9.63 8.82 8.10 7.52 7.39 7.06 6.78 6.63 5.83 5.25 4.88 4.44 4.08
Characteristics
Electrical Impedance, ohms Maximum Frequency, GHz Velocity, percent Peak Power Rating, kW dc Resistance, ohms/1000 ft (1000 m) Inner Outer dc Breakdown, volts Jacket Spark, volts RMS Capacitance, pF/ft (m) Inductance, H/ft (m) Mechanical Outer Conductor Inner Conductor Diameter over Jacket, in (mm) Diameter over Copper Outer Conductor, in (mm) Diameter Inner Conductor, in (mm) Nominal Inside Transverse Dimension (cm) Minimum Bending Radius, in (mm) Number of Bends, minimum (typical) Bending Moment, lb-ft (Nm) Cable Weight, lb/ft (kg/m) Tensile Strength, lb (kg) Flat Plate Crush Strength, lb/in (kg/mm) 50 0.5 2.3 93.1 425 0.17 (0.56) 0.075 (0.25) 13000 10000 21.8 (71.5) 0.055 (0.180) Copper Copper 2.38 (60.4) 2.23 (56.6) 0.890 (22.6) 4.96 22 (560) 15 (50) 55 (75) 1.16 (1.73) 980 (445) 145 (2.6)
563
N Female H12PNF
3-1/8" EIA Flange 82GF
1-5/8" EIA Flange 82R
7/8" EIA Flange 82S
Connectors
Interface N Female 7-16 DIN Male 3-1/8" EIA Flange 3-1/8" EIA Flange 1-5/8" EIA Flange 7/8" EIA Flange Splice Description Gas Pass, Female Gas Barrier, Female Gas Pass, Male Gas Pass, Male Type Number H12PNF H12PDM 82RF 82GF 82R 82S 82Z Inner Contact Attachment Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Outer Contact Attachment Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Plating Code SG SS BB BB BB BB BB Max. Length in (mm) 4.4 (112) 4.5 (114) 6.9 (175) 6.9 (175) 4.8 (122) 5.7 (145) 5.9 (150) Max. Dia. in (mm) 2.8 (71) 3.1 (79) 5.2 5.2 3.5 (89) 2.8 (71) 3.4 (86)
Type Number Connector Reattachment Kit For H12PNF, 82PN For 82R For 82RF For 82GF 1-5/8" EIA Gas Barrier 1-5/8" EIA End Terminal, for strap connection to center conductor, includes inner connector. Use with 82R 1-5/8" Inner Connector, with anchor bead 3-1/8" Inner Connector, with anchor bead 3-1/8" EIA 90 Miter Elbow, includes inner conductor 1-5/8" EIA 90 Miter Elbow 7/8" EIA 90 Miter Elbow 34767A-46 34767A-47 34767A-49 34767A-50 1261B
2061 34660 ACX350-20 ACX350-10SE ACX150-10SE 1060A
564

Frequency Band, GHz 1.7-1.9 1.85-1.99 2.11-2.2 Type Number HJ12P-50-17L HJ12P-50-18 HJ12P-50-21 Recommended Connectors 7/8" EIA Type N VSWR, No Gas Barrier Jack max. (R.L.) 82S 82S 82S H12PNF H12PNF H12PNF 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) Frequency Band, GHz 1.7-2.11 1.9-2.3 Type Number HJ12P-50-17 HJ12P-50-19 Recommended Connectors 7/8" EIA Type N VSWR, No Gas Barrier Jack max. (R.L. 82S 82S H12PNF H12PNF 1.15 (23.1) 1.15 (23.1)
VSWR values are guaranteed for factory fit assemblies and are typical for field cut lengths. If two different connector interfaces are selected, the higher VSWR value is guaranteed.
Accessories

see pages 599-607. Standard Hangers Kit of 10. Standard tower configuration spacing is 3-4 feet (1-1.2m). For different spacing recommendations, refer to Cable Hanger Spacing, pages 593-598. 42396A-4 Hardware Kit of 10. 3/8" bolts, lock washers, nuts 3/4" (19 mm) long 31769-5 1" (25 mm) long 31769-1 Snap-In Hangers Kit of 10. For pre-punched 3/4" (19 mm) holes on tower member or adapters. Standard tower configuration spacing is 3-4 feet. (1-1.2m). For different spacing recommendations, refer to Cable Hanger Spacing, pages 593-598. 206706-5 Standard Hoisting Grip 31535


565
3" Air Dielectric, HJ Series 50-ohm
HJ8-50B

Frequency MHz Attenuation dB/100 ft 0.0089 0.0126 0.0155 0.0179 0.0410 0.0590 0.0732 0.0964 0.132 0.141 0.136* 0.148 0.178 0.194 0.210 0.266 0.317 0.340 0.309* 0.363 0.368 0.407 0.448 0.488 0.429* 0.497 0.524 0.548 0.563 0.652 0.737 0.782 Attenuation dB/100 m 0.0291 0.0414 0.0508 0.0588 0.135 0.194 0.240 0.316 0.432 0.464 0.448* 0.484 0.583 0.635 0.688 0.874 1.04 1.12 1.01* 1.19 1.21 1.33 1.47 1.60 1.41* 1.63 1.72 1.80 1.85 2.14 2.42 2.57 Average Power, kW 640 476 387 334 146 102 81.9 62.2 45.6 42.4 33.4* 40.6 33.7 31.0 28.6 22.5 18.9 17.6 14.7* 16.5 16.3 14.7 13.4 12.3 10.6* 12.1 11.4 10.9 10.6 9.19 8.14 7.66

Standard Cable 3" Standard Cable, Standard Jacket Low VSWR and Specialized Cables Cable for Cellular, standard jacket 824-894 MHz, 1.20 VSWR, max. Broadcast, Low VSWR 54-216 MHz, 1.05 VSWR, max. over broadcast channel 470-740 MHz, 1.08 VSWR, max. over broadcast channel 740-856 MHz, 1.10 VSWR, max. over broadcast channel Cable with Polyethylene Dielectric (12% lower attenuation at 800 MHz)
* For broadcast applications, specify channel and frequency.
HJ8-50B
209227
42141* 27591-6
0.5 1 1.5 2 10 20 30 50 88 100 108 150 174 200 300 400 450 500 512 600 700 800 824 894 960 1000 1250 1500 1640
Characteristics
Electrical Impedance, ohms Maximum Frequency, GHz Velocity, percent Peak Power Rating, kW dc Resistance, ohms/1000 ft (1000 m) Inner Outer dc Breakdown, volts Jacket Spark, volts RMS Capacitance, pF/ft (m) Inductance, H/ft (m) Mechanical Outer Conductor Inner Conductor Diameter over Jacket, in (mm) Diameter over Copper Outer Conductor, in (mm) Diameter Inner Conductor, in (mm) Nominal Inside Transverse Dimensions, (cm) Minimum Bending Radius, in (mm) Number of Bends, minimum (typical) Bending Moment, lb-ft (Nm) Cable Weight, lb/ft (kg/m) Tensile Strength, lb (kg) Flat Plate Crush Strength, lb/in (kg/mm) 50 0.5 1.64 93.3 640 0.15 (0.49) 0.07 (0.23) 16000 10000 21.7 (71.2) 0.055 (0.18) Copper Copper 3.01 (76.6) 2.85 (72.4) 1.14 (29.0) 6.35 30 (760) 15 (25) 30 (41) 1.78 (2.6) 750 (340) 175 (3.1)
Standard Conditions: For Attenuation. VSWR 1.0 ambient temperature 20C (68F), atmospheric pressure, dry air. For Average Power, VSWR 1.0, inner temperature 121C (250F), ambient temperature 40C (104F), atmospheric pressure, dry air, no solar loading. * These values are for 27591-6 cable with polyethylene dielectric available on special order.
566
3-1/8" EIA Flange H8MP-302
1-5/8" EIA Flange 78AS
Connectors
Interface 3-1/8" EIA Flange 3-1/8" EIA Flange 3-1/8" EIA Flange 3-1/8" EIA Flange 1-5/8" EIA Flange Splice Description Gas pass, includes inner connector Gas block, includes inner connector** Gas pass, no inner connector Gas block, no inner connector Gas Pass, inner connector Type Number H8MP-302 H8MB-302 H8FP-302 H8FB-302 78AS 78BZ Inner Contact Attachment Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Outer Contact Attachment Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Plating Code BB BB BB BB BB BB Max. Length in (mm) 8.06 (204.7) 8.06 (204.7) 6.0 (152.4) 6.0 (152.4) 3.9 (99) 6.1 (155) Max. Dia. in (mm) 5.19 (131.7) 5.19 (131.7) 5.19 (131.7) 5.19 (131.7) 3.6 (91) 5.3 (135)
Plating Codes: BB - Brass Body and Pin ** Universal application - designed so that all connector variations of same flange size can be accommodated by modifying this connector, using instructions provided.
Type Number Connector Reattachment Kit For H8MP-302, H8MB-302, H8FP-302, H8FB-302 34767A-60 For 78AGF, 78ARM, 78ARF, 78AGM, 78AS 34767A-10 For 78BZ 34767A-30 3-1/8" EIA End Terminal, for strap connection to center conductor, includes inner connector. Use with H8FP-302. 2062 3-1/8" Inner Connector, with anchor bead ACX350-20 1-5/8" Inner Conductor, with anchor bead 34660 3-1/8" EIA 90 Miter Elbow, includes one inner connector ACX350-10SE 1-5/8" EIA 90 Miter Elbow ACX150-10SE 1-5/8" Gas Barrier 1261B
Accessories

see pages 599-607. Standard Hangers Kit of 10. Standard tower configuration spacing is 3-4 feet (1-1.2m). For different spacing recommendations, refer to Cable Hanger Spacing, pages 593-598. 31766A-11 Hardware Kit of 10. 3/8" bolts, lock washers, nuts 3/4" (19 mm) long 31769-5 1" (25 mm) long 31769-1 Standard Hoisting Grip 26895A

kits and our surge protection offerings, see pages 609-616. Grounding Kit with standard weatherproofing Factory attached one-hole lug, 600 mm (24") lead 204989-5 Field attached screw-on lug, 915 mm (36") lead 204989-35

567
HJ11-50

Frequency MHz 0.5 1 1.5 2 10 20 30 50 88 100 108 150 174 200 300 400 450 500 512 600 700 800 824 894 960 1000 Attenuation dB/100 ft 0.0074 0.0105 0.0129 0.0149 0.0339 0.0486 0.0601 0.0788 0.107 0.114 0.119 0.143 0.155 0.168 0.212 0.250 0.268 0.285 0.289 0.318 0.349 0.378 0.385 0.405 0.423 0.434 Attenuation dB/100 m 0.0243 0.0345 0.0423 0.0489 0.111 0.159 0.197 0.258 0.350 0.376 0.392 0.469 0.510 0.551 0.694 0.820 0.879 0.935 0.948 1.04 1.14 1.24 1.26 1.33 1.39 1.42 Average Power, kW 1000 705 574. 496 218 152 123 94.0 69.3 64.7 62.0 51.7 47.6 44.0 35.0 29.6 27.6 26.0 25.6 23.3 21.2 19.6 19.2 18.3 17.5 17.1

Standard Cable 4" Standard Cable, Standard Jacket HJ11-50 Low VSWR and Specialized Cables Broadcast, Low VSWR 54-216 MHz, 1.05 VSWR, max. over broadcast channel 470-740 MHz, 1.08 VSWR, max. over broadcast channel 740-856 MHz, 1.10 VSWR, max. over broadcast channel 42144*
Characteristics
Electrical Impedance, ohms Maximum Frequency, GHz Velocity, percent Peak Power Rating, kW dc Resistance, ohms/1000 ft (1000 m) Inner Outer dc Breakdown, volts Jacket Spark, volts RMS Capacitance, pF/ft (m) Inductance, H/ft (m) Mechanical Outer Conductor Inner Conductor Diameter over Jacket, in (mm) Diameter over Copper Outer Conductor, in (mm) Diameter Inner Conductor, in (mm) Nominal Inside Transverse Dimensions, (cm) Minimum Bending Radius, in (mm) Number of Bends, minimum (typical) Bending Moment, lb-ft (Nm) Cable Weight, lb/ft (kg/m) Tensile Strength, lb (kg) Flat Plate Crush Strength, lb/in (kg/mm) 50 0.5 1.22 92 1100 0.11 (0.36) 0.04 (0.13) 21000 10000 22.0 (72.2) 0.055 (0.18) Copper Copper 4.00 (102) 3.84 (97) 1.55 (39.4) 8.55 40 (1015) 15 (30) 191 (259) 2.50 (3.72) 900 (408) 280 (5.0)
568
6-1/8" EIA Flange H11FP-602
3-1/8" EIA Flange H11FB-302
Connectors
Interface 6-1/8" EIA Flange 6-1/8" EIA Flange 6-1/8" EIA Flange 6-1/8" EIA Flange 4-1/2" IEC Flange 4-1/2" IEC Flange 4-1/2" IEC Flange 4-1/2" IEC Flange 3-1/8" EIA Flange 3-1/8" EIA Flange 3-1/8" EIA Flange 3-1/8" EIA Flange Splice Description Gas pass, includes inner connector Gas block, includes inner connector** Gas pass, no inner connector Gas block, no inner connector Gas pass, includes inner connector Gas block, includes inner connector** Gas pass, no inner connector Gas block, no inner connector Gas pass, includes inner connector Gas block, includes inner connector** Gas pass, no inner connector Gas block, no inner connector Type Number H11MP-602 H11MB-602 H11FP-602 H11FB-602 H11MP-M408 H11MB-M408 H11FP-M408 H11FB-M408 H11MP-302 H11MB-302 H11FP-302 H11FB-302 81Z Inner Contact Attachment Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Outer Contact Attachment Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Plating Code BB BB BB BB BB BB BB BB BB BB BB BB BB Max. Length in (mm) 11.3 (288) 11.3 (288) 8.5 (216) 8.5 (216) 9.4 (240) 9.4 (240) 7.0 (178) 7.0 (178) 9.1 (230) 9.1 (230) 7.0 (178) 7.0 (178) 7.0 (178) Max. Dia. in (mm) 8.13 (207) 8.13 (207) 8.13 (207) 8.13 (207) 6.36 (162) 6.36 (162) 6.36 (162) 6.36 (162) 5.2 (132) 5.2 (132) 5.2 (132) 5.2 (132) 6.0 (152)
Type Number Connector Reattachment Kit For H11( )-602 34767A-57 For H11( )-M408 34767A-58 For H11( )-302 34767A-59 For 81RF 34767A-15 For 81GF 34767A-16 For 42826 34767A-40 For 42896 34767A-41 For 81Z 34767A-17 3-1/8" End Terminal, for strap connection to center conductor, includes inner connector. Use with H11FB-302. 2062 6-1/8" End Terminal, for strap connection to center conductor, includes inner connector. Use with H11FB-602. RLA650-80 6-1/8" EIA Inner Connector, with anchor bead ACX650-20 3-1/8" EIA Inner Connector, with anchor bead ACX350-20 4-1/2" IEC Inner Connector, with anchor bead 241252 3-1/8" EIA 90 Mitre Elbow, includes one inner connector ACX350-10SE Reducer, 3-1/8" to 1-5/8", captivated 3-1/8" inner connector 1861 6-1/8" EIA 90 Miter Elbow, includes one inner connector ACX650B-10SE
Accessories

see pages 599-607. Standard Hangers Kit of 10. Standard tower configuration spacing is 3-4 feet (1-1.2m). For different spacing recommendations, refer to Cable Hanger Spacing, pages 593-598. 31766A-10 Hardware Kit of 10. 3/8" bolts, lock washers, nuts 3/4" (19 mm) long 31769-5 1" (25 mm) long 31769-1 Standard Hoisting Grip 34759


569
HJ9-50

Frequency MHz 0.5 1 1.5 2 10 20 30 50 88 100 108 150 174 200 300 400 450 500 512 600 700 800 824 894 960 Attenuation dB/100 ft 0.0052 0.0074 0.0091 0.0105 0.0238 0.0340 0.0419 0.0547 0.0738 0.0789 0.0822 0.0981 0.106 0.115 0.143 0.168 0.180 0.191 0.193 0.212 0.231 0.250 0.255 0.267 0.278 Attenuation dB/100 m 0.0172 0.0244 0.0299 0.0346 0.0782 0.112 0.138 0.180 0.242 0.259 0.270 0.322 0.349 0.376 0.470 0.552 0.590 0.626 0.635 0.695 0.760 0.821 0.835 0.876 0.913 Average Power, kW 1272 898 732 633 280 196 159 122 90.4 84.5 81.1 68.0 62.7 58.1 46.5 39.6 37.1 34.9 34.5 31.5 28.8 26.6 26.2 25.0 23.9

Standard Cable 5" Standard Cable, Standard Jacket HJ9-50 Low VSWR and Specialized Cables Broadcast, Low VSWR 54-216 MHz, 1.05 VSWR, max. over broadcast channel 470-740 MHz, 1.08 VSWR, max. over broadcast channel 740-856 MHz, 1.10 VSWR, max. over broadcast channel 42142*
Characteristics
Electrical Impedance, ohms Maximum Frequency, GHz Velocity, percent Peak Power Rating, kW dc Resistance, ohms/1000 ft (1000 m) Inner Outer dc Breakdown, volts Jacket Spark, volts RMS Capacitance, pF/ft (m) Inductance, H/ft (m) Mechanical Outer Conductor Inner Conductor Diameter over Jacket, in (mm) Diameter over Copper Outer Conductor, in (mm) Diameter Inner Conductor, in (mm) Nominal Inside Transverse Dimensions, (cm) Minimum Bending Radius, in (mm) Number of Bends, minimum (typical) Bending Moment, lb-ft (Nm) Cable Weight, lb/ft (kg/m) Tensile Strength, lb (kg) Flat Plate Crush Strength, lb/in (kg/mm) 50 0.5 0.96 93.1 1890 0.1 (0.3) 0.04 (0.13) 27500 12000 21.7 (71.2) 0.055 (0.18) Copper Copper 5.20 (133) 5.00 (127) 2.02 (51.3) 11.3 50 (1270) 15 (30) 200 (271) 3.3 (4.9) 1000 (454) 275 (4.9)
570
6-1/8" EIA Flange H9FP-602
Connectors
Interface 6-1/8" EIA Flange 6-1/8" EIA Flange 6-1/8" EIA Flange 6-1/8" EIA Flange 4-1/2" IEC Flange 4-1/2" IEC Flange 4-1/2" IEC Flange 4-1/2" IEC Flange Splice Description Gas pass, includes inner connector Gas block, includes inner connector** Gas pass, no inner connector Gas block, no inner connector Gas pass, includes inner connector Gas block, includes inner connector** Gas pass, no inner connector Gas block, no inner connector Type Number H9MP-602 H9MB-602 H9FP-602 H9FB-602 H9MP-M408 H9MB-M408 H9FP-M408 H9FB-M408 79AZ Inner Contact Attachment Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Outer Contact Attachment Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Plating Code BB BB BB BB BB BB BB BB BB Max. Length in (mm) 12.3 (313) 12.3 (313) 9.5 (241) 9.5 (241) 10.7 (272) 10.7 (272) 8.3 (211) 8.3 (211) 6.2 (157) Max. Dia. in (mm) 8.13 (207) 8.13 (207) 8.13 (207) 8.13 (207) 6.6 (168) 6.6 (168) 6.6 (168) 6.6 (168) 7.6 (193)
Type Number Connector Reattachment Kit For 79AG, 79AR 34767A-45 For H9( )-602 34767A-55 For H9( )-M408 34767A-56 For 79AZ 34767A-31 6-1/8" End Terminal, for strap connection to center conductor, includes inner connector. Use with H9FB-602. RLA650-80 6-1/8" EIA Inner Connector, with anchor bead ACX650-20 4-1/2" IEC Inner Connector, with anchor bead 241252 Reducer, 6-1/8" to 3-1/8" includes two inner connectors RLA650-350 6-1/8" EIA 90 Miter Elbow, includes one inner connector ACX650-10SE
Accessories

see pages 599-607. Standard Hangers Kit of 10. Standard tower configuration spacing is 3-4 feet (1-1.2m). For different spacing recommendations, refer to Cable Hanger Spacing, pages 593-598. 33598-5 Hardware Kit of 10. 1/2" x 1-1/4" bolts, lock washers, nuts 31769-4 Standard Hoisting Grip 31031-1


571
5" Air Dielectric, High Power HJ( )HP Series 50-ohm
HJ9HP-50

Frequency MHz 0.5 1 1.6 2 10 20 30 50 88 100 108 150 174 200 300 400 450 500 512 600 700 800 824 860 894 960 Attenuation dB/100 ft 0.0045 0.0064 0.0081 0.0092 0.0211 0.0306 0.0381 0.0505 0.0695 0.0748 0.0782 0.0948 0.104 0.113 0.144 0.173 0.186 0.200 0.203 0.225 0.249 0.272 0.278 0.286 0.293 0.308 Attenuation dB/100 m 0.0148 0.0211 0.0267 0.0300 0.0693 0.100 0.125 0.166 0.228 0.245 0.257 0.311 0.340 0.369 0.474 0.568 0.612 0.655 0.665 0.737 0.816 0.893 0.910 0.937 0.962 1.010 Average Power, kW 1690 1690 1540 1375 599 416 335 254 185 172 165 137 125 116 90.8 76.2 70.8 66.3 65.3 59.1 53.6 49.1 48.2 48.9 45.7 43.6

High Power Cable 5" Standard High Power Cable HJ9HP-50 45 70 MHz, 1.06 VSWR, max. 87 108 MHz, 1.06 VSWR, max. over broadcast channel 170 230 MHz, 1.08 VSWR, max. over broadcast channel 470 860 MHz, 1.10 VSWR, max. over broadcast channel
Characteristics
Electrical Impedance, ohms Maximum Frequency, GHz Velocity, percent Peak Power Rating, kW dc Resistance, ohms/1000 ft (1000 m) Inner Outer dc Breakdown, volts Jacket Spark, volts RMS Capacitance, pF/ft (m) Inductance, H/ft (m) Mechanical Outer Conductor Inner Conductor Diameter over Jacket, in (mm) Diameter over Outer Conductor, in (mm) Diameter Inner Conductor, in (mm) Nominal Inside Transverse Dimensions, (cm) Minimum Bending Radius, in (mm) Number of Bends, minimum (typical) Bending Moment, lb-ft (Nm) Cable Weight, lb/ft (kg/m) Tensile Strength, lb (kg) Flate Plate Crush Strength, lb/in (kg/mm) 50 0.5 0.96 96.4 1690 0.1 (0.33) 0.04 (0.13) 26000 12000 20.8 (68.1) 0.054 (0.176) Copper Copper 5.20 (132) 5.00 (127) 2.07 (52.7) 11.3 50 (1270) 15 (30) 200 (271) 3.4 (4.9) 1000 (454) 240 (4.29)
United States Patent No. 5,742,002
572
6-1/8" EIA Flange H9HPFP-602
Connectors
Interface 6-1/8" EIA Flange 6-1/8" EIA Flange 6-1/8" EIA Flange 6-1/8" EIA Flange Splice Description Gas pass, includes inner connector Gas block, includes inner connector** Gas pass, no inner connector Gas block, no inner connector Type Number H9HPMP-602 H9HPMB-602 H9HPFP-602 H9HPFB-602 H9HPZ Inner Contact Attachment Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Outer Contact Attachment Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Plating Code BB BB BB BB BB Max. Length in (mm) 12.4 (315) 12.4 (315) 9.5 (242) 9.5 (242) 6.19 (158) Max. Dia. in (mm) 8.13 (207) 8.13 (207) 8.13 (207) 8.13 (207) 7.57 (193)
Type Number Connector Reattachment Kit For H9 ( ) HP-602 34767A-55 For H9HPZ 34767A-31 6-1/8" End Terminal, for strap connection to center conductor, includes inner connector. Use with H9HPFB-602. RLA650-80 6-1/8" EIA Inner Connector, with anchor bead ACX650-20 4-1/2" IEC Inner Connector, with anchor bead 241252 Reducer, 6-1/8" to 3-1/8" includes two inner connectors RLA650-350 6-1/8" EIA 90 Miter Elbow, includes one inner connector ACX650B-10SE
Accessories

see pages 599-607. Standard Hangers Kit of 10. Standard tower configuration spacing is 3-4 feet (1-1.2m). For different spacing recommendations, refer to Cable Hanger Spacing, pages 593-598. 33598-5 Hardware Kit of 10. 1/2" x 1-1/4" bolts, lock washers, nuts 31769-4 Standard Hoisting Grip 31031-1


573

Frequency MHz 0.5 1 1.5 2 10 20 30 50 88 100 108 150 174 200 300 400 450 500 512 600 700 800 824 894 960 1000 1250 1500 1700 1800 2000 2100 2200 2300 3000 3300 3400 4000 4900 6000 8000 10000 12000 14000 16000 18000 19000 20000 22000 Attenuation dB/100 ft 0.126 0.178 0.219 0.253 0.570 0.812 0.999 1.30 1.74 1.86 1.94 2.31 2.50 2.69 3.34 3.91 4.17 4.42 4.48 4.89 5.32 5.74 5.83 6.11 6.36 6.51 7.40 8.22 8.84 9.14 9.73 10.0 10.3 10.6 12.4 13.2 13.4 14.8 16.8 19.1 23.0 26.7 30.2 33.5 36.8 39.9 41.5 43.0 46.0 Attenuation dB/100 m 0.413 0.585 0.718 0.830 1.87 2.66 3.28 4.27 5.72 6.12 6.37 7.57 8.19 8.82 11.0 12.8 13.7 14.5 14.7 16.0 17.5 18.8 19.1 20.0 20.9 21.4 24.3 27.0 29.0 30.0 31.9 32.9 33.8 34.7 40.7 43.1 43.9 48.6 55.2 62.7 75.6 87.6 99.0 110.0 120.7 131.0 136.1 141.1 151.0 Average Power, kW 8.43 5.95 4.85 4.20 1.86 1.31 1.06 0.817 0.609 0.570 0.547 0.460 0.425 0.395 0.318 0.272 0.255 0.241 0.237 0.217 0.200 0.185 0.182 0.174 0.167 0.163 0.144 0.129 0.120 0.116 0.109 0.106 0.103 0.101 0.086 0.081 0.079 0.072 0.063 0.056 0.046 0.040 0.035 0.032 0.029 0.027 0.026 0.025 0.023
FSJ1-75

Standard Cable 1/4" Standard superflexible Fire Retardant Cables 1/4" Fire Retardant Jacket (CATVX) 1/4" Fire Retardant Jacket (CATVR) FSJ1-75 FSJ1RN-75A FSJ1RN-75A
Characteristics
Electrical Impedance, ohms Maximum Frequency, GHz Velocity, percent Peak Power Rating, kW dc Resistance, ohms/1000 ft (1000 m) Inner Outer dc Breakdown, volts Jacket Spark, volts RMS Capacitance, pF/ft (m) Inductance, H/ft (m) Mechanical Outer Conductor Inner Conductor Diameter over Jacket, in (mm) Diameter over Copper Outer Conductor, in (mm) Minimum Bending Radius, in (mm) Number of Bends, minimum (typical) Bending Moment, lb-ft (Nm) Cable Weight, lb/ft. (kg/m) Tensile Strength, lb (kg) Flat Plate Crush Strength, lb/in (kg/mm) 75 3 22.0 78 6.7 15 (49.2) 1.8 (5.9) 2000 5000 17.4 (57.0) 0.098 (0.321) Copper Copper-Clad Steel 0.29 (7.4) 0.25 (6.4) 1 (25) 15 (50) 0.5 (0.68) 0.046 (0.068) 150 (68) 100 (1.8)
Standard Conditions: For Attenuation. VSWR 1.0 ambient temperature 20C (68F), atmospheric pressure, dry air. For Average Power, VSWR 1.0, inner temperature 40C (104F), inner conductor temperature 1000C (212F), no solar loading.
574
N Male F1NM-7550
Connectors
Interface N Male N Male N Female BNC Male UHF Male TNC Male CATV Type F Description 50 Ohm Mating Pin 70 Ohm Mating Pin 70 Ohm Mating Pin 50 Ohm Mating Pin 50 Ohm Mating Pin 50 Ohm Mating Pin Type Number F1NM-7550-H F1NM-7570 F1NF-7570 49651 41SP 41SWT-75 F1FM-75 Inner Contact Attachment Solder Solder Solder Solder Solder Solder Captivated Outer Contact Attachment Solder Solder Solder Tab Flare Tab Flare Tab Flare Crimp Plating Code SG NS BS BS BB SS BB Max. Length in (mm) 1.85 (47) 2.2 (56) 1.9 (48) 1.2 (30) 1.5 (38) 1.1 (28) 1.42 (36) Max. Dia. in (mm) 0.92 (23.4) 0.79 (20.1) 0.70 (17.8) 0.56 (14.2) 0.72 (18.3) 0.63 (16.0) 0.56 (14.2)
Plating Codes: BB - Brass Body and Pin, BS - Brass Body and Silver Plated Pin, NS - Nickel Plated Body and Silver Plated Pin, SS - Silver Plated Body and Pin, SG - Silver Plated Body and Gold Plated Pin
Accessories

see pages 599-607. Insulated Hanger, single. Recommended maximum spacing is 2.5 ft (0.76 m). For different spacing recommendations, refer to Cable Hanger Spacing, pages 593-598 11662-3 Angle Adapter, for insulated hanger 40430-1 Nylon Cable Tie Kit of 50, Indoor use, Recommended maximum spacing is 1.5 ft (0.5 m) 40417 Nylon Cable Tie Kit in plastic box. 100 each 4, 5.5 and 7.5 inch ties. Indoor use, Recommended maximum spacing is 1.5 ft (0.5 m) CT-K350 Velcro Cable Ties, Black, 8 inch. Indoor Use Kit of 10 VCT8-10 Kit of 50 VCT8-50 Kit of 100 VCT8-100 Support/Hoisting Grip. Use at 200-ft (60 m) intervals. Grip with one clamp F1SGRIP Support clamp kit of 10 F1SGRIP-1IK

see pages 617, 618. Cold Shrink Weatherproofing Kit 5/8" Coax to 1/4" Coax 7/8" Coax to 1/4" Coax 1-1/4" or 1-5/8" Coax to 1/4" Coax 1/4" to 1-1/2" Omni/Panel base Type N or DIN 1/4" to 2" Omni/Panel base Type N or DIN Connector/Splice Weatherproofing Kit
241475-13 241475-12 241475-11 241548-10 241548-11 221213


575

Frequency MHz 0.5 1 1.5 2 10 20 30 50 88 100 108 150 174 200 300 400 450 500 512 600 700 800 824 894 960 1000 1250 1500 1700 1800 2000 2100 2200 2300 3000 3300 3400 4000 4900 6000 8000 10000 11500 Attenuation dB/100 ft 0.065 0.092 0.112 0.130 0.293 0.417 0.514 0.668 0.896 0.958 0.997 1.19 1.28 1.38 1.72 2.01 2.14 2.27 2.30 2.51 2.73 2.94 2.99 3.13 3.26 3.34 3.79 4.21 4.53 4.68 4.98 5.13 5.27 5.42 6.35 6.73 6.86 7.58 8.60 9.78 11.8 13.6 15.0 Attenuation dB/100 m 0.213 0.301 0.369 0.427 0.962 1.37 1.68 2.19 2.94 3.14 3.27 3.89 4.21 4.53 5.63 6.58 7.02 7.44 7.53 8.22 8.96 9.65 9.82 10.3 10.7 11.0 12.4 13.8 14.9 15.4 16.4 16.8 17.3 17.8 20.8 22.1 22.5 24.9 28.2 32.1 38.6 44.7 49.1 Average Power, kW 26.2 18.5 15.1 13.1 5.79 4.07 3.30 2.54 1.89 1.77 1.70 1.43 1.32 1.23 0.989 0.846 0.794 0.749 0.739 0.677 0.622 0.577 0.568 0.542 0.521 0.509 0.448 0.403 0.375 0.363 0.341 0.331 0.322 0.314 0.268 0.252 0.248 0.224 0.198 0.174 0.144 0.125 0.114
FSJ4-75A

Standard Cable 1/2" Standard Superflexible Fire Retardant Cables 1/2" Fire Retardant Jacket (CATVX) 1/2" Fire Retardant Jacket (CATVR) FSJ4-75A FSJ4RN-75A FSJ4RN-75A
Characteristics
Electrical Impedance, ohms Maximum Frequency, GHz Velocity, percent Peak Power Rating, kW dc Resistance, ohms/1000 ft (1000 m) Inner Outer dc Breakdown, volts Jacket Spark, volts RMS Capacitance, pF/ft (m) Inductance, H/ft (m) Mechanical Outer Conductor Inner Conductor Diameter over Jacket, in (mm) Diameter over Copper Outer Conductor in (mm) Diameter Inner Conductor, in (mm) Minimum Bending Radius, in (mm) Number of Bends, minimum (typical) Bending Moment, lb-ft (Nm) Cable Weight, lb/ft (kg/m) Tensile Strength, lb (kg) Flat Plate Crush Strength, lb/in (kg/mm) 75 2 11.5 81 10.0 1.50 (4.9) 1.00 (3.28) 2500 5000 16.7 (54.9) 0.094 (0.309) Copper Copper 0.52 (13.2) 0.48 (12.2) 0.118 (3.0) 1.25 (32) 20 (50) 2.0 (2.7) 0.14 (0.21) 140 (63.5) 105 (1.9)
Standard Conditions: For Attenuation. VSWR 1.0 ambient temperature 20C (68F), atmospheric pressure, dry air. For Average Power, VSWR 1.0, ambient temperature 40C (104F), inner conductor temperature 100C (212F), no solar loading.
576
N Male F4NM-7570
N Female F4NF-7570
Connectors
Interface N Male N Male N Male N Female N Female UHF Male UHF Female CATV Type F Description 50 Ohm Mating Pin 70 Ohm Mating Pin 50 Ohm Mating Pin, Right Angle 50 Ohm Mating Pin 70 Ohm Mating Pin 50 Ohm Mating Pin 50 Ohm Mating Pin Type Number F4NM-7550 F4NM-7570 F4NR-7550 F4NF-7550 F4NF-7570 44ASP-75 44ASU-75 44ASCM Inner Contact Attachment Solder Solder Solder Solder Solder Solder Solder Solder Outer Contact Attachment Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Plating Code BB BB BB BS BS BS BS BB Max. Length in (mm) 2.3 (58) 2.2 (56) 3.3/1.5 (84/38) 2.2 (56) 2.1 (53) 2.3 (58) 2.3 (58) 2.5 (64) Max. Dia. in (mm) 0.84 (21.3) 0.84 (21.3) 0.84 (21.3) 0.84 (21.3) 0.84 (21.3) 0.84 (21.3) 0.84 (21.3) 0.84 (21.3)
Plating Codes: BB - Brass Body and Pin, BS - Brass Body and Silver Plated Pin.
Accessories

see pages 599-607. Standard Hangers Kit of 10. Recommended maximum spacing is 3-ft (1 m). For different spacing recommendations, refer to Cable Hanger Spacing, pages 593-598. 43211A Snap-In Hangers Kit of 10. For prepunched 3/4" (19mm) holes on tower member or adapters, Recommended maximum spacing is 3-ft (1 m). For different spacing recommendations, refer to Cable Hanger Spacing, pages 593-598. 206706-1 Support/Hoisting Grip. Use at 200-ft (60 m) intervals. Grip with one clamp F4SGRIP Support clamp kit of 10 F4SGRIP-4IK Standard Hoisting Grip 43094

pages 617, 618. WeatherShield Connector Protection Housing LDF5 to FSJ4 LDF6 to FSJ4 LDF7 to FSJ4 Cold Shrink Weatherproofing Kit 1/2" Coax N Connector to 1/2" Coax N Connector 5/8" Coax to 1/2" Coax 7/8" Coax to 1/2" Coax 1-1/4" or 1-5/8" Coax to 1/2" Coax 2 1/4" Coax to 1/2" Coax 1/2" to 1-1/2" Omni/Panel Base Type N or DIN Connector/Splice Weatherproofing Kit
WS-L5F4 WS-L6F4 WS-L7F4 241474-4 241475-13 241475-9 241475-5A 241475-8 241548-8 221213

kits and our surge protection offerings, see pages 609-616. Standard Grounding Kits Factory attached one-hole lug 24" 204989-1 Factory attached two-hole lug 24" 241088-1 Field attached two-hole lug 60" 241545

EASIAX Plus Automated Cable Prep Tool EASIAX Cutting Tool FSJ4/FSJ1 EASIAX Cutting Tool FSJ4/FSJ2 Cable Flare Tool DIN Connector Coupling Torque Wrench N Connector Coupling Torque Wrench CPT-F4B 207865 241372 224363 244377 244379
577
LDF4-75A

Frequency MHz 0.5 1 1.5 2 10 20 30 50 88 100 108 150 174 200 300 400 450 500 512 600 700 800 824 894 960 1000 1250 1500 1700 1800 2000 2100 2200 2300 2500 3300 3400 4000 4900 6000 8000 10000 Attenuation dB/100 ft 0.042 0.060 0.073 0.084 0.190 0.270 0.333 0.432 0.579 0.618 0.644 0.764 0.826 0.889 1.10 1.29 1.37 1.45 1.47 1.60 1.74 1.88 1.91 2.00 2.08 2.12 2.41 2.67 2.87 2.96 3.15 3.24 3.33 3.42 3.59 4.23 4.30 4.75 5.37 6.09 7.29 8.42 Attenuation dB/100 m 0.138 0.196 0.240 0.277 0.624 0.887 1.09 1.42 1.90 2.03 2.11 2.51 2.71 2.92 3.62 4.22 4.50 4.76 4.82 5.26 5.72 6.16 6.26 6.55 6.81 6.97 7.90 8.76 9.41 9.73 10.3 10.6 10.9 11.2 11.8 13.9 14.1 15.6 17.6 20.0 23.9 27.6 Average Power, kW 24.5 17.3 14.1 12.2 5.43 3.82 3.10 2.39 1.78 1.67 1.60 1.35 1.25 1.16 0.937 0.803 0.753 0.712 0.702 0.644 0.592 0.550 0.541 0.517 0.497 0.486 0.429 0.387 0.360 0.348 0.328 0.319 0.310 0.302 0.288 0.244 0.240 0.218 0.192 0.170 0.142 0.123

Standard Cable 1/2" Standard superflexible Fire Retardant Cables 1/2" Fire Retardant Jacket (CATVX) 1/2" Fire Retardant Jacket (CATVR) LDF4-75A LDF4RN-75A LDF4RN-75A
Characteristics
Electrical Impedance, ohms 75 3 Maximum Frequency, GHz 10 Velocity, percent 88 Peak Power Rating, kW 26 dc Resistance, ohms/1000 ft (1000 m) Inner 1.15 (3.77) Outer 0.58 (1.90) dc Breakdown, volts 4000 Jacket Spark, volts RMS 8000 Capacitance, pF/ft (m) 15.4 (50.5) Inductance, H/ft (m) 0.087 (0.284) Mechanical Outer Conductor Copper Inner Conductor Copper-Clad Aluminum Diameter over Jacket, in (mm) 0.63 (16) Diameter over Copper Outer Conductor, in (mm) 0.55 (14) Minimum Bending Radius, in (mm) 5 (125) Number of Bends, minimum (typical) 15 (40) Bending Moment, lb-ft (Nm) 2.8 (3.8) Cable Weight, lb/ft (kg/m) 0.14 (0.21) Tensile Strength, lb (kg) 200 (90.7) Flat Plate Crush Strength, lb/in (kg/mm) 110 (2.0)
578
N Male L4NM-7570
N Female L4NF-7570
Connectors
Interface N Male N Male N Male Description 50 Ohm Mating Pin 70 Ohm Mating Pin 50 Ohm Mating Pin, Right Angle 50 Ohm Mating Pin 70 Ohm Mating Pin Type Number L4NM-7550-H L4NM-7570-H L4NR-7550 L4NF-7550 L4NF-7570 L44P-75 L44U-75 48070 L44Z-75 Inner Contact Attachment Solder Solder Solder Solder Solder Solder Solder Solder Outer Contact Attachment Self Flare Self Flare Self Flare Self Flare Self Flare Self Flare Self Flare Self Flare Self Flare Plating Code BB BB NB BB BB BB BB BB BB Max. Length in (mm) 2.5 (64) 2.5 (64) 3.2/1.5 (81/38) 2.5 (64) 2.3 (58) 2.3 (58) 2.3 (58) 2.0 (50) 3.2 (81) Max. Dia. in (mm) 0.94 (23.8) 0.94 (23.8) 0.95 (24.1) 0.91 (23.1) 0.91 (23.1) 0.91 (23.1) 0.91 (23.1) 0.91 (23.1) 1.1 (27.9)
N Female N Female UHF Male UHF Female CATV Equipment Housing Splice
Plating Codes: BB - Brass Body and Pin, NB - Nickel Plated Body and Brass Pin.
Accessories

hardware see pages 599-607. Standard Hangers Kit of 10. Recommended maximum spacing is 3-ft (1 m). For different spacing recommendations, refer to Cable Hanger Spacing, pages 593-598. 43211A Hardware Kit of 10. 3/8" bolts, lockwashers, nuts 3/4" (19 mm) long 31769-5 1" (25 mm) long 31769-1 Snap-In Hangers Kit of 10. For prepunched 3/4" (19mm) holes on tower member or adapters, Recommended maximum spacing is 3-ft. For different spacing recommendations, refer to Cable Hanger Spacing, pages 593-598. 206706-1 Click-On Hangers Kit of 10. Recommended maximum spacing is 3-ft L4CLICK Mounting Hardware see page 605. Kwik-Clamps Kit of 10. See page 607 for hanger options Support/Hoisting Grip. Use at 200-ft (60m) intervals. Grip with one clamp L4SGRIP Support clamp kit of 10 L4SGRIP-4IK Standard Hoisting Grip 43094
SureGround Plus Grounding Kit with weatherproofing boot Factory attached one-hole lug, 600 mm (24") lead SGPL4-06B1 Factory attached two-hole lug, 600 mm (24") lead SGPL4-06B2 Field attached two-hole lug, 1500 mm (59") lead SGPL4-15B4

see pages 617, 618. Cold Shrink Weatherproofing Kit 1/2" Coax N Connector to 1/2" Coax N Connector 5/8" Coax to 1/2" Coax 7/8" Coax to 1/2" Coax 1-1/4" or 1-5/8" Coax to 1/2" Coax 2 1/4" Coax to 1/2" Coax 1/2" to 1-1/2" Omni/Panel base Type N or DIN 1/2" to 2" Omni/Panel base Type N or DIN 1/2" LDF4 to Antenna Type N interface Connector/Splice Weatherproofing Kit
241474-4 242475-13 241475-9 241475-5A 241475-8 241548-8 241548-9 241548-4 221213

kits and our surge protection offerings, see pages 609-616. SureGround Grounding Kit with standard weatherproofing Factory attached one-hole lug, 600 mm (24") lead SGL4-06B1 Factory attached two-hole lug, 600 mm (24") lead SGL4-06B2 Field attached two-hole lug, 1500 mm (59") lead SGL4-15B4

EASIAX Plus Automated Cable Prep Tool EASIAX Cutting Tool Cable Flare Tool DIN Connector Coupling Torque Wrench N Connector Coupling Torque Wrench CPT-L4ARC 207866 224363 244377 244379
579
LDF5-75
Description Type No. Frequency MHz 0.5 1 1.5 2 10 20 30 50 88 100 108 150 174 200 300 400 450 500 512 600 700 800 824 894 960 1000 1250 1500 1700 1800 2000 2100 2200 2300 3000 3400 4000 5000 5300 Attenuation dB/100 ft 0.024 0.034 0.042 0.049 0.111 0.158 0.195 0.254 0.342 0.366 0.382 0.455 0.493 0.532 0.665 0.781 0.834 0.885 0.897 0.982 1.07 1.16 1.18 1.24 1.29 1.32 1.51 1.69 1.82 1.88 2.01 2.07 2.13 2.19 2.59 2.81 3.12 3.62 3.76 Attenuation dB/100 m 0.080 0.113 0.139 0.160 0.363 0.518 0.639 0.833 1.12 1.20 1.25 1.49 1.62 1.75 2.18 2.56 2.74 2.90 2.94 3.22 3.52 3.81 3.87 4.06 4.24 4.34 4.95 5.53 5.97 6.18 6.60 6.80 7.00 7.20 8.51 9.23 10.3 11.9 12.3 Average Power, kW 45.2 31.9 26.0 22.5 9.94 6.96 5.65 4.33 3.21 3.00 2.88 2.42 2.23 2.07 1.65 1.41 1.32 1.24 1.23 1.12 1.03 0.949 0.933 0.889 0.853 0.832 0.729 0.653 0.605 0.584 0.548 0.531 0.516 0.502 0.425 0.392 0.353 0.304 0.293

Standard Cable 7/8" Standard Cable LDF5-75
Characteristics
Electrical Impedance, ohms 75 3 Maximum Frequency, GHz 5.3 Velocity, percent 89 Peak Power Rating, kW70 dc Resistance, ohms/1000 ft (1000 m) Inner 0.34 (1.11) Outer 0.32 (1.05) dc Breakdown, volts 6500 Jacket Spark, volts RMS 8000 Capacitance, pF/ft (m) 15.1 (49.5) Inductance, H/ft (m) 0.087 (0.284) Mechanical Outer Conductor Copper Inner Conductor Copper-clad aluminum Diameter over Jacket, in (mm) 1.082 (27.48) Diameter over Copper Outer Conductor, in (mm) 0.980 (24.89) Minimum Bending Radius, in (mm) 10 (250) Number of Bends, minimum (typical) 15 (40) Bending Moment, lb-ft (Nm) 12 (16.3) Cable Weight, lb/ft (kg/m) 0.30 (0.45) Tensile Strength, lb (kg) 325 (147) Flat Plate Crush Strength, lb/in (kg/mm) 80 (1.4)
580
N Female L5PNF-7570-BH
Connectors
Interface N Male N Male N Female N Female Description 70-Ohm Mating Pin 50-Ohm Mating Pin 70-Ohm Mating Pin 70-Ohm Mating Pin Bulkhead Type Number L5PNM-7570 L5PNM-7550 L5PNF-7570 L5PNF-7570-BH Inner Contact Attachment Solder Solder Solder Solder Outer Contact Attachment Self-Flare Self-Flare Self-Flare Self Flare Plating Code SG SG SG BB Max. Length in (mm) 2.9 (74) 3.1 (78.7) 2.9 (74) 3.1 (78.7) Max. Dia. in (mm) 1.36 (34.5) 1.36 (34.5) 1.36 (34.5) 1.36 (34.5)
Plating Codes: BB - Brass Body and Pin, SG - Silver Plated Body and Gold Plated Pin
Accessories

see pages 599-607. Standard Hangers Kit of 10. Recommended maximum spacing is 3-ft (1 m). For different spacing recommendations, refer to Cable Hanger Spacing, pages 593-598. 42396A-5 Hardware Kit of 10. 3/8" bolts, lockwashers, nuts 3/4" (19 mm) long 31769-5 1" (25 mm) long 31769-1 Snap-in Hangers Kit of 10. For prepunched 3/4" (19 mm) holes on tower member or adapters. Recommended maximum spacing is 3-ft. For different spacing recommendations, refer to Cable Hanger Spacing, pages 593-598. 206706-2 Click-On Hangers Kit of 10. Recommended maximum spacing is 3-ft L5CLICK Mounting Hardware see page 605. Kwik-Clamps Kit of 10. See page 607 for hanger options Support/Hoisting Grip. Use at 200-ft (60m) intervals. Grip with one clamp L5SGRIP Support clamp kit of 10 L5SGRIP-5IK Standard Hoisting Grip 19256B

see pages 617-618. WeatherShield Connector Protection Housing LDF5 to LDF4 LDF5 to FSJ4 Cold Shrink Weatherproofing Kit 7/8" Coax to 7/8" Coax N Connectors 1-5/8" Coax to 7/8" Coax N Connectors 7/8" Coax to 1/4" Coax 7/8" Coax to 3/8" or 1/2" Coax 7/8" Coax to Antenna Type N or DIN interface 7/8" to APTL5 Arrestors Connector/Splice Weatherproofing Kit
WS-L5L4 WS-L5F4 241474-5 241475-3 241475-12 241475-9 241548-5 241474-5 221213

kits and our surge protection offerings, see pages 609-616. SureGround Grounding Kit with standard weatherproofing Factory attached one-hole lug, 600 mm (24") lead SGL5-06B1 Factory attached two-hole lug, 600 mm (24") lead SGL5-06B2 Field attached two-hole lug, 1500 mm (59") lead SGL5-15B4 SureGround Plus Grounding Kit with weatherproofing boot Factory attached one-hole lug, 600 mm (24") lead SGPL5-06B1 Factory attached two-hole lug, 600 mm (24") lead SGPL5-06B2 Field attached two-hole lug, 1500 mm (59") lead SGPL5-15B4

EASIAX Plus Automated Cable Prep Tool EASIAX Cutting Tool Cable Flaring Tool 7/8" Connector Torque Wrench DIN Connector Coupling Torque Wrench N Connector Coupling Torque Wrench CPTL5A 222951 224368 244378 244377 244379
581
HJ5-75

Standard and Fire Retardant Cables 7/8" Standard Cable, Standard Jacket 7/8" Fire Retardant Jacket (CATVR) HJ5-75 HJ5RN-75
Characteristics
Electrical Impedance, ohms Maximum Frequency, GHz Velocity, percent Peak Power Rating, kW dc Resistance, ohms/1000 ft (1000 m) Inner Outer dc Breakdown, volts Jacket Spark, volts RMS Capacitance, pF/ft (m) Inductance, H/ft (m) Mechanical Outer Conductor Inner Conductor Diameter over Jacket, in (mm) Diameter over Copper Outer Conductor, in (mm) Minimum Bending Radius, in (mm) Number of Bends, minimum (typical) Bending Moment, lb-ft (Nm) Cable Weight, lb/ft (kg/m) Tensile Strength, lb (kg) Flat Plate Crush Strength, lb/in (kg/mm) 75 1 5.6 90 60 0.25 (0.82) 0.20 (0.66) 6000 8000 15.1 (49.4) 0.085 (0.278) Copper Copper 1.11 (28.2) 1.01 (25.7) 10 (250) 15 (20) 25 (34) 0.52 (0.79) 800 (360) 250 (4.5)
582
N Female H5NF-7550
7/8" EIA Flange 75AR-75
N Male H5NM-7550
Connectors
Interface N Male N Female 7/8" EIA Flange UHF Female LC Male End Terminal Splice
Plating Codes:
Description 50 Ohm Mating Pin 50 Ohm Mating Pin Gas Pass 50 Ohm Mating Pin 50 Ohm Mating Pin
Type Number H5NM-7550 H5NF-7550 75AR-75 75AU-75 75AM-75 75AT-75 75AZ-75
Inner Contact Attachment Self-tapping Self-tapping Self-tapping Self-tapping Self-tapping Self-tapping Self-tapping
Outer Contact Attachment Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare Tab Flare
Plating Code BB BB BB BB BB BB BB
Max. Length in (mm) 3.5 (89) 3.9 (99) 4.3 (109) 4.3 (109) 5.0 (127) 5.8 (147) 4.2 (107)
Max. Dia. in (mm) 1.4 (36) 1.4 (36) 2.25 (57) 1.4 (36) 1.4 (36) 1.4 (36) 1.4 (36)
BB - Brass Body and Pin
Accessories

see pages 599-607. Standard Hangers Kit of 10. Recommended maximum spacing is 3 ft (1 m). For different spacing recommendations, refer to Cable Hanger Spacing, pages 593-598. 42396A-5 Hardware Kit of 10. 3/8" bolts, lockwashers, nuts 3/4" (19 mm) long 1" (25 mm) long Click-On Hangers Kit of 10. Recommended maximum spacing is 3-ft (1 m). Mounting Hardware see page 605. Standard Hoisting Grip 31769-5 31769-1 L5CLICK 19256B

kits and our surge protection offerings, see pages 609-616. SureGround Grounding Kit with standard weatherproofing Factory attached one-hole lug, 600 mm (24") lead Factory attached two-hole lug, 600 mm (24") lead Field attached two hole lug, 1500 mm (59") lead SGL5-06B1 SGL5-06B2 SGL5-15B4

583
Factory Made Cable Assemblies
SureFle
TM
Andrew has state-of-the-art cable assembly facilities all over the world. You no longer have to deal with expensive and labor intensive cable preparation and connector attachment on site. Andrew will do it for you. Our factory automated processes allow us to produce cable assemblies that will meet your specifications, your delivery requirements, and your budget. HELIAX cable assemblies are ideal for rack-to-rack and radio OEM applications. They are also commonly used for connecting antennas to transmission lines and transmission lines to radios. Here are the advantages of the Andrew factory made cable assembly program: Competitive pricing. Low attachment charges. Guaranteed quality. Assemblies are 100% tested prior to shipment and include a ten year warranty. Fast delivery. Global manufacturing and inventory. Complete product offering. Any cable, any length, any connector. Low VSWR assemblies. For high performance applications.
Delivering a Decade of Confidence

We are proud to continue our new 10-year warranty on our HELIAX standard and SureFlex cable assembly products, foam-dielectric and air-dielectric coaxial cables, waveguides, connectors, and accessories. This repair or replace warranty covers any defects in material and workmanship that may arise under normal use and service and is available on products sold directly by Andrew and its authorized distributors. It's all part of our long tradition of commitment to customers. Install Andrew products and receive unsurpassed performance, uncompromising quality, and unmatched durability and reliability - all backed by a ten-year warranty to keep systems operational, not just tomorrow, but well into the future.
Genuine HELIAX Cable

For transmission line systems requiring jumpers, genuine HELIAX cable, 7/8" and under, can provide a high-performance, high-reliability alternative.
584
Factory Made Cable Assemblies
SureFlex Cable Assemblies Seal in Performance

Providing excellent performance and an integral weather seal, our new patented, factory automated, SureFlex cable assemblies use an innovative, completely soldered connector attachment to seal in performance and seal out the elements. These new assemblies allow you to benefit from our unparalleled HELIAX cable. SureFlex cable assemblies unique connector attachment includes a solder connection to both the inner and the outer conductors. The automated attachment process employs an induction soldering technique that ensures 360 degrees of electrical contact and a reliable weather seal. This process ensures a consistent, robust attachment every time. SureFlex Cable Assemblies provide: Stable IMD Consistent VSWR Complete weatherproofing Tightly controlled pin depth High pull-off strength
Andrew SureFlex cable assemblies are ideal for wireless systems such as PCS, cellular, and paging.
New SureFlex Arrestor Plus Cable Assemblies

These SureFlex cable assemblies include all the benefits described plus the protection of an integrated Arrestor Plus surge arrestor. The one-piece surge arrestor/connector delivers premium lightning protection in a single component that is completely soldered to seal in performance and seal out the elements. The assemblies are offered with both Quarter Wave Shorting Stub (QWS) surge arrestors and broadband replaceable gas tube arrestors. They include bulkhead mounting and will fit into your base station cabinet or in building applications. Other Available Cable Assemblies Any connector and length can be made to order. Contact Andrew to have an assembly designed for your application.
Premium Cable Assemblies Standard Cable Assemblies

Cable Type Assembly Length Cable Type Frequency Detail Assembly Length
F4-PNMNM-3
Connectors
L4P10-PNMNM-6
Connectors
Premium SureFlex Cable Assemblies SureFlex Cable Assemblies

Cable Type Assembly Length Cable Type Frequency Detail Assembly Length
F4A-PNMNM-3
Connectors
L4P10A-PNMNM-6
Connectors
585
SureFlex and Standard Cable Assemblies Ordering Information

Connectors FSJ1-50A N Male/N Male N Male/Right Angle N Male N Male/N Female N Male/UHF Male N Male/BNC Male N Male/SMA Male N Male/Right Angle SMA Male 7-16 DIN Male/7-16 DIN Male SMA Male/SMA Male SMA Male/SMA Female SMA Male/Right Angle SMA Male FSJ2-50 N Male/N Male N Male/Right Angle N Male N Male/7-16 DIN Male 7-16 DIN Male/7-16 DIN Male 7-16 DIN Male/Right Angle 7-16 DIN Male N Male/N Female FSJ4-50B N Male/N Male N Male/N Female 7-16 DIN Male/7-16 DIN Male 7-16 DIN Male/7-16 DIN Female N Male/7-16 DIN Male 7-16 DIN Male/7-16 DIN Female 7-16 DIN Female/Right Angle 7-16 DIN Male 7-16 DIN Male/Right Angle 7-16 DIN Male 7-16 DIN Male/4.1-9.5 DIN Male N Female/Right Angle N Male N Male/7-16 DIN Female N Male/Right Angle 7-16 DIN Male N Male/4.1-9.5 DIN Male N Male/Right Angle 4.1-9.5 DIN Male N Male/Right Angle N Male Right Angle N Male/7-16 DIN Female UHF Male/UHF Male 7-16 DIN Female/7-16DIN Female N Female/7-16 DIN Male EFX2-50 7-16 DIN Male/7-16 DIN Female 7-16 DIN Male/7-16 DIN Male N Male/7-16 DIN Male N Male/N Female N Male/N Male N Male/N Male Right Angle N Male Right Angle/7-16 DIN Male Right Angle ETS2-50 7-16 DIN Male/7-16 DIN Male N Male/7-16 DIN Male N Male/N Male HST4-50 7-16 DIN Male/7-16 DIN Male N Male/N Male N Male/7-16 DIN Male LDF2-50 N Male/N Male 7-16 DIN Male/7-16 DIN Male N Male/7-16 DIN Male SMA Male/SMA Male L2-PNMNM-(*) L2-PDMDM-(*) L2-PNMDM-(*) L2-SMSM-(*) HST4-PDMDM-(*) HST4-PNMNM-(*) HST4-PNMDM-(*) ETS2-PDMDM-(*) ETS2-PNMDM-(*) ETS2-PNMNM-(*) EFX2A-PDMDF-(*) EFX2A-PDMDM-(*) EFX2A-PNMDM-(*) EFX2A-PNMNM-(*) EFX2-PDMDF-(*) EFX2-PDMDM-(*) EFX2-PNMDM-(*) EFX2-PNMNF-(*) EFX2-PNMNM-(*) EFX2-PNMNR-(*) EFX2-PNRDR-(*) F4A-PNMNM-(*) F4A-PNMNF-(*) F4A-PDMDM-(*) F4A-PDMDF-(*) F4A-PNMDM-(*) F4A-PDMDF-(*) F4A-PDFDR-(*) F4A-PDMDR-(*) F4A-PDMKM-(*) F4A-PNFNR-(*) F4A-PNMDF-(*) F4A-PNMDR-(*) F4A-PNMNR-(*) F4A-PNRDF-(*) F4A-PDFDF-(*) F4A-PNFDM-(*) F4-PNMNM-(*) F4-PNMNF-(*) F4-PDMDM-(*) F4-PDMDF-(*) F4-PNMDM-(*) F4-PDMDF-(*) F4-PDFDR-(*) F4-PDMDR-(*) F4-PDMKM-(*) F4-PNFNR-(*) F4-PNMDF-(*) F4-PNMDR-(*) F4-PNMKM-(*) F4-PNMKR-(*) F4-PNMNR-(*) F4-PNRDF-(*) F4-UMUM-(*) F4-PDFDF-(*) F4-PNFDM-(*) F2A-PNMNM-(*) F2A-PNMNR-(*) F2A-PNMDM-(*) F2A-PDMDM-(*) F2A-PDMDR-(*) F2A-PNMNF-(*) F2-PNMNM-(*) F2-PNMDM-(*) F2-PDMDM-(*) F2-PNMNF-(*) F1A-PNMNM-(*) F1A-PNMNR-(*) F1A-PDMDM-(*) F1-PNMNM-(*) F1-PNMNR-(*) F1-PNMNF-(*) F1-PNMUM-(*) F1-PNMBM-(*) F1-PNMSM-(*) F1-PNMSR-(*) F1-SMSM-(*) F1-SMSF-(*) F1-SMSR-(*) SureFlex Type Number Standard Type Number
586
SureFlex and Standard Cable Assemblies Ordering Information

Connectors LDF4-50A N Male/N Male N Male/N Female 7-16 DIN Male/7-16 DIN Male 7-16 DIN Male/7-16 DIN Female N Male/7-16 DIN Male N Male/Right Angle 7-16 DIN Male 7-16 DIN Male/Right Angle 7-16 DIN Male UHF Male/UHF Male UHF Male/UHF female N Male/N Female Right Angle N Male/7-16 DIN Male VXL5-50 7-16 DIN Male/7-16 DIN Male N Male/N Male N Male/7-16 DIN Male N Female/N Female 7-16 DIN Female/7-16 DIN Female V5-PDMDM-(*) V5-PNMNM-(*) V5-PNMDM-(*) V5-PNFNF-(*) V5-PDFDF-(*) L4A-PNMNM-(*) L4A-PNMNF-(*) L4A-PDMDM-(*) L4A-PDMDF-(*) L4A-PNMDM-(*) L4A-PNMDR-(*) L4A-PDMDR-(*) L4A-PNMNF-(*) L4A-PNRDM-(*) L4-PNMNM-(*) L4-PNMNF-(*) L4-PDMDM-(*) L4-PDMDF-(*) L4-PNMDM-(*) L4-PNMDR-(*) L4-PDMDR-(*) L4-UMUM-(*) L4-UMUF-(*) L4-PNMNF-(*) L4-PNRDM-(*) SureFlex Type Number Standard Type Number
Premium SureFlex Cable Assemblies - Ordering Information

Connectors Type Number EFX2P-50-40 Low VSWR Cable (0.806-0.960 GHz), see page 490 for specifications. N Male/N Male N Male/7-16 DIN Male 7-16 DIN Male/7-16 DIN Male EFX2P40A-PNMNM-(*) EFX2P40A-PNMDM-(*) EFX2P40A-PDMDM-(*)
EFX2P-50-41 Low VSWR Cable (1.7-2.3 GHz), see page 490 for specifications. N Male/N Male N Male/7-16 DIN Male 7-16 DIN Male/7-16 DIN Male EFX2P41A-PNMNM-(*) EFX2P41A-PNMDM-(*) EFX2P41A-PDMDM-(*)
EFX2P-50-42 Low VSWR Cable (0.806-0.960 and 1.7-2.3 GHz), see page 490 for specifications. N Male/N Male N Male/7-16 DIN Male 7-16 DIN Male/7-16 DIN Male EFX2P42A-PNMNM-(*) EFX2P42A-PNMDM-(*) EFX2P42A-PDMDM-(*)
FSJ4P-50B-40 Low VSWR Cable (0.806-0.960 GHz), see page 487 for specifications. N Male/N Male N Male/7-16 DIN Male 7-16 DIN Male/7-16 DIN Male F4P40A-PNMNM-(*) F4P40A-PNMDM-(*) F4P40A-PDMDM-(*)
FSJ4P-50B-41 Low VSWR Cable (1.7-2.3 GHz), see page 487 for specifications. N Male/N Male N Male/7-16 DIN Male 7-16 DIN Male/7-16 DIN Male F4P41A-PNMNM-(*) F4P41A-PNMDM-(*) F4P41A-PDMDM-(*)
FSJ4P-50B-42 Low VSWR Cable (0.806-0.960 and 1.7-2.3 GHz), see page 487 for specifications. N Male/N Male N Male/7-16 DIN Male 7-16 DIN Male/7-16 DIN Male F4P42A-PNMNM-(*) F4P42A-PNMDM-(*) F4P42A-PDMDM-(*)
LDF4P-50A-40 Low VSWR Cable (0.806-0.960 GHz), see page 498 for specifications. N Male/N Male N Male/7-16 DIN Male 7-16 DIN Male/7-16 DIN Male L4P40A-PNMNM-(*) L4P40A-PNMDM-(*) L4P40A-PDMDM-(*)
LDF4P-50A-41 Low VSWR Cable (1.7-2.3 GHz), see page 498 for specifications. N Male/N Male N Male/7-16 DIN Male 7-16 DIN Male/7-16 DIN Male L4P41A-PNMNM-(*) L4P41A-PNMDM-(*) L4P41A-PDMDM-(*)
LDF4P-50A-42 Low VSWR Cable (0.806-0.960 and 1.7-2.3 GHz), see page 498 for specifications. N Male/N Male N Male/7-16 DIN Male 7-16 DIN Male/7-16 DIN Male L4P42A-PNMNM-(*) L4P42A-PNMDM-(*) L4P42A-PDMDM-(*)
* Insert length in feet or use M suffix to designate meters. For example, -3 = 3 feet, -2M = 2 meters, and -1M5 = 1.5 meters.
587
Phase Measured Cable Assemblies

HELIAX phase measured cable assemblies are excellent for applications where signals arrive in phase such as phased array radar, or for delay lines cut to precision electrical length. Both phase matched and delay lines are available with precision or standard length tolerances and are referred to collectively as phase measured assemblies. Phase measured assemblies are manufactured from phase stabilized versions of HELIAX coaxial cables and connectors. HELIAX coaxial cables exhibit excellent phase stability with temperature changes and with bending.
Phase Stabilized Cable

When foam cable is subjected to temperature changes, its electrical length undergoes a permanent change which cannot be removed by restoring it to the initial temperature. However, this hysteresis effect can be eliminated by temperature cycling the cable until it returns to the same electrical length after each heating (not the same as the initial electrical length). Temperature cycling is used to produce phase stabilized HELIAX cables. Figures 3 through 6 show the typical behavior of phase stabilized cable with temperature.
Phase Stability with Temperature Change

As temperature changes, the physical length of the metallic conductors of coaxial cable increase causing an increase in the electrical length and transmission delay time. The dielectric constant of materials, such as the low-loss foam dielectric of HELIAX cable, decreases with increasing temperature. This causes an increase in the velocity of propagation of the cable, which results in a decrease in electrical length and transmission delay time. In HELIAX cable, these two effects are of similar magnitude, causing little change in the overall electrical length of the cable. In cables with solid dielectrics, such as RG-214/U, the decrease in electrical length caused by the dielectric constant change is greater than the increase caused by the conductors. Therefore, these cables exhibit larger changes in electrical length. Figures 1 and 2 display this effect.
1500
1500 RG393 RG142
800
ELECTRICAL LENGTH CHANGE (PPM)
1000
1000 141SR 500
600
400
500
200
0 FSJ1 -500
LDF2
ETS1 0
0 FSJ1 -200 FSJ2 -400 FSJ4
-500
RG214 -1000 RG223
-1000
-600
-1500 -40
-20
20
40
60
80
-1500 -40
-20
20
40
60
80
-800 -40
-20
20
40
60
80
TEMPERATURE (C)
TEMPERATURE (C)
TEMPERATURE (C)
Figure 1
Figure 2
Figure 3 Electrical Length Change vs. Temperature FSJ1-50A, FSJ2-50, FSJ4-50B
588

Converting PPM to Degrees for Specific Applications
Phase Change (Degrees) = 3.66 x 10-7 (PPM) (LF/V) Where: PPM = Total Electrical Length Change in PPM Over Temperature Range of Interest (From Figures 3, 4, 5 and 6) L F V = = = Cable Length, Feet Frequency, MHz Cables Relative Velocity
Cable ETS1-50 FSJ1-50A FSJ2-50 ETS2-50 FSJ4-50B LDF2-50 Bending Radius In (mm) 1.0 (25) 1.0 (25) 1.0 (25) 1.0 (25) 1.25 (32) 3.75 (95) 5.0 (125) 10.0 (250) 5.0 (125) 10.0 (250) Test Frequency GHz 18.0 18.0 13.0 13.0 10.2 13.0 8.0 5.0 10.0 5.0 Typical Phase Change, 360 Bend, Electrical Degrees/GHz 0.8 0.2 0.4 0.8 0.5 0.5 0.6 0.3 1.0 0.8
The foam dielectric in HELIAX cables is bonded to the center conductor, while the outer conductor corrugations mechanically lock the outer conductor to the dielectric. This locking results in excellent stability. Typical phase change with bending data for HELIAX coaxial cables is given below:
Sample Calculation Using the formula above, the change in phase for a system operating at 10 GHz using a 12 ft FSJ4-50B superflexible HELIAX cable over a temperature range of -40 to 80C (-40 to 176F) is calculated as follows: Phase Change = = 3.66 x 10-7 (400) x 12 x 104 ________________________________ 0.81 21.69 maximum phase change
LDF4-50A LDF5-50A HJ4-50 HJ5-50
At 1 GHz this equates to just over 2 maximum phase change.
Phase Stability with Bending

When cable is bent during installation, it is important to maintain a constant cable phase length. Stability in bending is enhanced by locking all the cable components together such that the cable bends on its neutral axis.
Phase change with bending is not as repeatable or predictable as phase change with temperature. Results obtained will vary depending on exactly how the cable is bent. The above numbers are intended as a guide to the order of magnitude of change to be expected during installation if bending is required.
800
800
800
400
400 ETS1
600
600
600
400
200
200
200
0 LDF2 -200 LDF5 -400 LDF4 -600
0 FT4
0 HJ4 -200 HJ5 -400
-200
-400
ETS2
-600
-600
-800 -40
-20
20
40
60
80
-800 -40
-20
20
40
60
80
-800 -40
-20
20
40
60
80
TEMPERATURE (C)
TEMPERATURE (C)
TEMPERATURE (C)
Figure 4 Electrical Length Change vs. Temperature LDF1-50, LDF2-50, LDF4-50A, LDF5-50A
Figure 5 Electrical Length Change vs. Temperature ETS1-50, ETS2-50, FT4-50
Figure 6 Electrical Length Change vs. Temperature HJ4-50, HJ5-50
589
Phase Measured Assemblies

Two types of phase measured assemblies are available from Andrew: Delay Lines. These are assemblies cut to a specific electrical length, specified either in nanoseconds or degrees, at a specified frequency. When several are ordered, their physical length can be expected to vary somewhat. Phase Matched Assemblies. These are assemblies which are matched in electrical length to each other at a specified frequency. When phase matched assemblies are ordered, their minimum acceptable physical length must be specified, as well as an operating frequency. Andrew will supply assemblies matched in electrical length of this physical length and longer.
Phase Measured Cable Characteristics and Ordering Information

(Larger sizes also available; contact Andrew.) 1/4" Superflexible FSJ1-50A For cable/connector technical information see page: Type Numbers Phase Stabilized 35422-33 35422-42 42394-142 42394-342 2.021 (0.0056) 42394-42 42394-242 2.021 (0.0056) 35422-24 42394-124 35422-50 42394-150 35422-23 42394-122 35422-25 42394-114 35422-26 42394-115 474 3/8" Superflexible FSJ2-50 480 1/2" Superflexible FSJ4-50B 485 1/4" LDF LDF1-50 491 3/8" LDF LDF2-50 493 1/2" LDF LDF4-50A 496 7/8" LDF LDF5-50A 506
Delay Line Cut to Electrical 42394-133 Length 0.1 ns tolerance (36 /GHz) Delay Line, Precision Tolerence deg/GHz (ns) Phase Matched 0.1 ns (36 /GHz) Precision Phase Matched deg/GHz (ns) Characteristics Velocity 2% ft/ns (m/ns) 2%* Phase/Temp Coefficient over temp. range -22 to + 104 F (-30 to +40C) PPM/ F (PPM/ C) 84 0.83 (0.25) -4 to +5 (-7 to +9) 42394-333 1.906 (0.0053) 42394-33 42394-233 1.906 (0.0053)
42394-324 42394-350 42394-322 2.222 (0.0062) 2.56 (0.0072) 2.946 (0.0082) 42394-24 42394-50 42394-22
42394-314 42394-315 3.466 (0.0096) 4.627 (0.0129) 42394-14 42394-15
42394-224 42394-250 42394-222 2.222 (0.0062) 2.56 (0.0072) 2.946 (0.0082)
42394-214 42394-215 3.466 (0.0096) 4.627 (0.0129)
83 0.82 (0.25) -5 to +5 (-9 to +9)
81 0.8 (0.24) -1 to +3 (-2 to +6)
86 0.85 (0.26) -6 to +5 (-10 to +8)
88 0.87 (0.26) -4 to +3 (-8 to +6)
88 0.87 (0.26) +4 to +9 (+7 to +16)
89 0.88 (0.27) +3 to +7 (+5 to +12)
* For delay lines, the approximate length can be determined by multiplying delay in nanoseconds by the ft/ns factor for the appropriate cable type.
590
Two levels of cutting accuracy are available for both delay lines and phase matched assemblies: Standard Cutting Accuracy. 0.1 nanoseconds or 36/GHz. This cutting accuracy is not available for some combinations of test frequency and cable assembly lengths.
Precision Cutting Accuracy. Tolerance per table below. This varies by cable type and is based on one half of the corrugation pitch of the cable. This is as close as the cables can be fit on a production basis. This cutting accuracy is not available for some combinations of test frequency and cable assembly lengths.
Phase Measured Cable Characteristics and Ordering Information

(Larger sizes also available; contact Andrew.) 1/4" High Power Superflexible ETS1-50T For cable/connector technical information see page: Type Numbers Phase Stabilized 35422-46 35422-45 42394-145 42394-345 2.021 (0.0056) 42394-45 42394-245 2.021 (0.0056) 35422-8 42394-108 42394-308 4.121 (0.0114) 42394-8 42394-208 4.121 (0.0114) 35422-5 42394-105 42394-305 4.712 (0.0131) 42394-5 42394-205 4.712 (0.0131) 35422-1 42394-141 42394-341 42394-241 35422-41 477 3/8" High Power Superflexible ETS2-50T 483 1/2" Air HJ4-50 535 7/8" Air HJ5-50 555 1-5/8" Air HJ7-50A 560 3" Air HJ8-50B 566
Delay Line Cut to Electrical 42394-146 Length 0.1 ns tolerance (36 /GHz) Delay Line, Precision Tolerence deg/GHz (ns) Phase Matched 0.1 ns (36 /GHz) Precision Phase Matched deg/GHz (ns) Characteristics Velocity 2% ft/ns (m/ns) 2%* Phase/Temp Coefficient over temp. range -22 to + 104 F (-30 to +40C) PPM/ F (PPM/ C) 82 0.81 (0.25) -9 to +6 (-16 to +10) 42394-346 1.935 (0.0054) 42394-46 42394-246 1.935 (0.0054)
83 0.82 (0.25) -5 to +7 (-8 to +13)
91.4 0.9 (0.27) +3 to +6 (+5 to +11)
91.6 0.9 (0.27) +3 to +6 (+5 to +11)
92.1
93.3
* For delay lines, the approximate length can be determined by multiplying delay in nanoseconds by the ft/ns factor for the appropriate cable type.
591
System Timing
Andrew GPS Antenna Kits Speed Installation, Simplify Ordering
Obtain a complete GPS antenna system packaged in a single comprehensive kit. The GPS Antenna System Kit features everything required to establish GPS capabilities for PCS applications. This weatherproof system is designed for outdoor use. It has been tested to meet the following specifications:
Test Thermal shock Moisture resistance Test Specifications MIL-STD-202, method 107, condition A-1, -55OC to +85OC IEC 529, Class IPX4S
Kits Include: GPS antenna integrated with a 26 dB low-noise amplifier with a Type N female connector. A 5-volt dc bias is required, via the center conductor, to power the integrated low-noise pre-amplifier. HELIAX connectors. (1/2" LDF4, 1/2" FSJ4 or 7/8" LDF5 HELIAX cable is ordered separately to length) HELIAX cable hangers, grounding kit, and 3M Cold Shrink self-applicating weatherproofing kit.. Antenna mounting plate and mast shroud.
Ordering Information GPS-KIT12 GPS Antenna Kit for 1/2 LDF4 HELIAX Cable GPS-KITF4 GPS Antenna Kit for 1/2 FSJ4 HELIAX Cable GPS-KIT78 GPS Antenna Kit for 7/8 LDF5 HELIAX Cable
Hanger Spacing Considerations

Hanger Spacing Tables. Recommended hanger spacing is tabulated, on the following pages, for various HELIAX hangers and cable types. The recommended hanger spacing is tabulated as a function of wind speed and ice conditions. These recommendations have been derived from extensive mechanical, environmental, and wind tunnel testing. They are based on the guidelines stated in EIA Standard RS-222 (Structural Standards for Steel Antenna Towers and Antenna Supporting Structures) and BSI CP3: Chapter V: Part 2 (Code of Basic Data for the Design of Buildings, Wind Loading). The recommendations assume that proper structural mounting arrangements and installation procedures are adhered to. The recommended hanger spacings are tabulated as a function of wind speed and radial ice only. However, there are many other factors that must be taken into consideration when determining hanger spacing. Geographical Considerations. Geographical location may have a significant impact on installation conditions. Coastal installations may be in the path of hurricanes producing high values of sustained wind. Mountainous regions may experience extreme wind gusts. Geographical location also dictates the "design basic wind speed", which is the highest wind speed, at a height of 10 meters, over open terrain. Published values of basic wind speed are compiled for various counties and states and are found in EIA TIA-222-E.
592
Hanger Spacing Considerations

Structural Considerations. Andrew hangers are designed for severe mechanical and environmental conditions. However, the mounting arrangement and structural integrity of the tower or structure, to which the hangers are attached, must be taken into account. A poorly designed mounting structure may result in excessive vibration, subjecting the hanger to extreme stress and fatigue. In such cases, the mounting geometry should be re-evaluated and the hanger spacing reduced. Height Considerations. The height of the tower, to which the hangers are attached, as well as the height above average ground level, must be considered when calculating hanger spacing. For towers and structures exceeding 150 feet, it is important to review the requirements and guidelines stated in EIA Standard RS-222 (Structural Standards for Steel Antenna Towers and Antenna Supporting Structures). Wind loading results in horizontal forces being applied to hangers. The horizontal force applied to each hanger and tower section can be approximated by (see EIA TIA-222-E): F = Wind Load Applied to Hanger = qzCfApGH. qz = Velocity Pressure = 0.00256 Kz (V)2 Kz = Velocity Pressure Exposure Coefficient = (Z/33)0.286 (for z in feet and 1< Kz < 2.58) Z V = Height Above Average Ground Level to Midpoint of the Section = Basic Wind Speed Icing Considerations. A large accumulation of radial ice will dramatically increase the projected area, resulting in a significant increase in loading. It is important to know if, for the given geographic area, significant icing and high wind loading are occurring simultaneously. However, the probability of an extreme ice loading occurring simultaneously with an extreme wind load is low allowing some reduction in overall wind loading. Wind Loading. The loads experienced by a hanger transmitted through the cable arise from various phenomena. However, the above equation states, the very important relationship, that the force subjected to an individual hanger is proportional to the square of the wind velocity. Therefore, for extreme wind loading environments, it is critical to carefully review hanger spacing considerations and adhere to proper mounting procedures. Aside from the weight of the cable and ice accumulation, the hangers holding integrity is impacted predominantly by the static drag load, vortex shedding, and atmospheric turbulence induced from wind, as well as the natural resonating frequencies of the structure. Surviving Severe Conditions. Andrew hangers are designed and extensively tested for their mechanical integrity, their ability to survive severe environmental conditions, and their ability to support transmission lines, without creating electrical discontinuities. Laboratory testing includes wind tunnel testing, ice loading, axial loading, vibration, static side loading, normal loading, thermal cycling, salt spray (corrosion), UV exposure, metallurgical evaluation, time domain reflectometry and VSWR. Proper selection of hanger type, hanger spacing, and hanger installation will ensure that these hangers will withstand the most demanding requirements for your wireless system.
GH = Gust Response Factor = (see EIA-222) Cf = Structure Force Coefficient (1.2 for cable) Ap = Projected Area (Cable Diameter x Hanger Spacing) Combining the above variables, we see that the force, applied to a hanger due to wind loading, is equal to the following: F = Wind Load Applied to Hanger = 0.00256 (Z/33)0.286 (V)2 Cf GH (Cable Diameter x Hanger Spacing)
From the above equations we can see that the velocity pressure exposure coefficient and the gust response factor introduce some height dependence when considering the amount of force subjected to an individual hanger.
593
The maximum spacing recommendations assume that all hangers are properly installed and tightened. Recommendations for a 150 ft (46 m) tower with 125 mph (200 km/h) wind speed and 1/2" radial ice (typical conditions) are highlighted in red. See Hanger Spacing Considerations, page 593 for further information. Standard Hangers Recommended Maximum Hanger Spacing
Cable Size Wind Speed: Radial Ice: 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 5/8" 5/8" 7/8" 7/8" 7/8" 7/8" 1-1/4" 1-5/8" 1-5/8" 2-1/4" 2-1/4" 3" 4" 5" 5" Wind Speed: Radial Ice: 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 5/8" 5/8" 7/8" 7/8" 7/8" 7/8" 1-1/4" 1-5/8" 1-5/8" 2-1/4" 2-1/4" 3" 4" 5" 5" LDF4-50A LDF4-75A HL4RP-50 HJ4-50 HLT4-50 HT4-50 HST4-50 HS4RP-50 FSJ4-50B FSJ4-75A LDF4.5-50 HJ4.5-50 LDF5-50A HJ5-50 HJ5-75 HT5-50 LDF6-50 LDF7-50A HJ7-50A LDF12-50 HJ12-50 HJ8-50B HJ11-50B HJ9HP-50 HJ9-50 43211A 43211A 43211A 43211A 43211A 43211A 43211A 43211A 43211A 43211A 42396A-9 42396A-9 42396A-5 42396A-5 42396A-5 42396A-5 42396A-1 42396A-2 42396A-2 42395A-4 42396A-4 31766A-11 31766A-10 33598-5 33598-5 LDF4-50A LDF4-75A HL4RP-50 HJ4-50 HLT4-50 HT4-50 HST4-50 HS4RP-50 FSJ4-50B FSJ4-75A LDF4.5-50 HJ4.5-50 LDF5-50A HJ5-50 HJ5-75 HT5-50 LDF6-50 LDF7-50A HJ7-50A LDF12-50 HJ12-50 HJ8-50B HJ11-50B HJ9HP-50 HJ9-50 43211A 43211A 43211A 43211A 43211A 43211A 43211A 43211A 43211A 43211A 42396A-9 42396A-9 42396A-5 42396A-5 42396A-5 42396A-5 42396A-1 42396A-2 42396A-2 42395A-4 42396A-4 31766A-11 31766A-10 33598-5 33598-5 Cable Type Number Hanger Type Number No Ice 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) No Ice 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 4 (1.2) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) Recommended Maximum Hanger Spacing, feet (meters) 85 mph (137 km/h) 1/2" (13 mm) 1" (25 mm) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) No Ice 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) No Ice 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 100 mph (160 km/h) 1/2" (13 mm) 1" (25 mm) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 3 (0.9) 4 (1.2) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 4 (1.2) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6) 3 (0.9) 2 (0.6) 2 (0.6) 2 (0.6) 2 (0.6) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5)
125 mph (200 km/h) 1/2" (13 mm) 1" (25 mm) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 2 (0.6) 2 (0.6) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 2 (0.6) 2 (0.6) 2 (0.6) 2 (0.6) 2 (0.6) 2 (0.6) 2 (0.6) 2 (0.6) 2 (0.6) 2 (0.6) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5)
150 mph (240 km/h) 1/2" (13 mm) 1" (25 mm) 2 (0.6) 2 (0.6) 2 (0.6) 2 (0.6) 2 (0.6) 2 (0.6) 2 (0.6) 2 (0.6) 2 (0.6) 2 (0.6) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 1 (0.3) 1 (0.3) 1 (0.3) 1 (0.3) 1 (0.3) 1 (0.3) 1 (0.3) 1 (0.3) 1 (0.3) 1 (0.3) 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 2 (0.6) 2 (0.6) 3 (0.9) 2 (0.6) 2 (0.6) 3 (0.9) 3 (0.9) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5)
Definitions and Assumptions 1. Per EIA-222 Standard: Coefficient of drag for coaxial cable is 1.2 (cylindrical members). Ice forms completely around member (360 degrees). Combined wind and ice loading is reduced by 25% to reflect lower probability of wind and ice occuring simutaneously. 2. Wind speeds are maximum, which includes gust factors and exposure factors.
594
The maximum spacing recommendations assume that all hangers are properly installed and tightened. Recommendations for a 150 ft (46 m) tower with 125 mph (200 km/h) wind speed and 1/2" radial ice (typical conditions) are highlighted in red. See Hanger Spacing Considerations, page 593 for further information. Snap-In Hangers Recommended Maximum Hanger Spacing
Cable Size Wind Speed: Radial Ice: 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 5/8" 7/8" 7/8" 7/8" 7/8" 7/8" 1-1/4" 1-5/8" 1-5/8" 2-1/4" Wind Speed: Radial Ice: 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 5/8" 7/8" 7/8" 7/8" 7/8" 7/8" 1-1/4" 1-5/8" 1-5/8" 2-1/4" LDF4-50A LDF4-75 FSJ4-50B FSJ4-75A HL4RP-50 HLT4-50 HS4RP-50 HST4-50 HT4-50 HJ4-50 LDF4.5-50 LDF5-50A HJ5-50 HJ5-75 HT5-50 FT5-50T LDF6-50 LDF7-50A HJ7-50A LDF12-50 206706A-1 206706A-1 206706A-1 206706A-1 206706A-1 206706A-1 206706A-1 206706A-1 206706A-1 206706A-1 206706A-6 206706A-2 206706A-2 206706A-2 206706A-2 206706A-2 206706A-3 206706A-4 206706A-4 206706A-5 LDF4-50A LDF4-75 FSJ4-50B FSJ4-75A HL4RP-50 HLT4-50 HS4RP-50 HST4-50 HT4-50 HJ4-50 LDF4.5-50 LDF5-50A HJ5-50 HJ5-75 HT5-50 FT5-50T LDF6-50 LDF7-50A HJ7-50A LDF12-50 206706A-1 206706A-1 206706A-1 206706A-1 206706A-1 206706A-1 206706A-1 206706A-1 206706A-1 206706A-1 206706A-6 206706A-2 206706A-2 206706A-2 206706A-2 206706A-2 206706A-3 206706A-4 206706A-4 206706A-5 Cable Type Number Hanger Type Number No Ice 4 (1.22) 4 (1.22) 4 (1.22) 4 (1.22) 4 (1.22) 4 (1.22) 4 (1.22) 4 (1.22) 4 (1.22) 4 (1.22) 4 (1.22) 4 (1.22) 4 (1.22) 4 (1.22) 4 (1.22) 4 (1.22) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) No Ice 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 2 (0.61) Recommended Maximum Hanger Spacing, feet (meters) 85 mph (137 km/h) 1/2" (13 mm) 1" (25 mm) 4 (1.22) 4 (1.22) 3 (0.91) 3 (0.91) 4 (1.22) 4 (1.22) 4 (1.22) 4 (1.22) 4 (1.22) 4 (1.22) 4 (1.22) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 2 (0.61) 2 (0.61) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) No Ice 100 mph (160 km/h) 1/2" (13 mm) 1" (25 mm) 3 (0.91) 3 (0.91) 2 (0.61) 2 (0.61) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61)
4 (1.22) 4 (1.22) 3 (0.91) 3 (0.91) 4 (1.22) 4 (1.22) 4 (1.22) 4 (1.22) 4 (1.22) 4 (1.22) 4 (1.22) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) No Ice
125 mph (200 km/h) 1/2" (13 mm) 1" (25 mm) 3 (0.91) 3 (0.91) 2 (0.61) 2 (0.61) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 2 (0.61) 2 (0.61) 2 (0.61) 1 (0.30) 1 (0.30) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 1 (0.30)
150 mph (240 km/h) 1/2" (13 mm) 1" (25 mm) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 1 (0.30) 1 (0.30) 1 (0.30) 1 (0.30) 1 (0.30) 1 (0.30) 1 (0.30) 1 (0.30) 1 (0.30) 1 (0.30) 1 (0.30) 1 (0.30) 1 (0.30) 1 (0.30) 1 (0.30) 1 (0.30) 1 (0.30) 1 (0.30) 1 (0.30) 1 (0.30) 1 (0.30) 1 (0.30) 1 (0.30) 1 (0.30) 1 (0.30) 1 (0.30) 1 (0.30) 1 (0.30) 1 (0.30)
3 (0.91) 3 (0.91) 2 (0.61) 2 (0.61) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61)
595
The maximum spacing recommendations assume that all hangers are properly installed and tightened. Recommendations for a 150 ft (46 m) tower with 125 mph (200 km/h) wind speed and 1/2" radial ice (typical conditions) are highlighted in red. See Hanger Spacing Considerations, page 593 for further information. Insulated Hangers Recommended Maximum Hanger Spacing
Cable Size Wind Speed: Radial Ice: 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 7/8" 7/8" 7/8" 7/8" 1-1/4" 1-5/8" 1-5/8" 2-1/4" 2-1/4" 3" 4" 5" 5" FSJ1-75A HST1-50 LDF1-50 EFX2-50 ETS2-50 FSJ2-50 HS2RP-50 HST2-50 LDF2-50 FSJ4-50B FSJ4-75A LDF4-50A LDF4-75A HL4RP-50 HLT4-50 HS4RP-50 HST4-50 HT4-50 HJ4-50 LDF5-50A HJ5-50 HJ5-75 HT5-50 LDF6-50 HJ7-50A LDF7-50A HJ12-50 LDF12-50 HJ8-50B HJ11-50 HJ9-50 HJ9HP-50 11662-3 11662-3 11662-3 11662-3 11662-3 11662-3 11662-3 11662-3 11662-3 11662-3 11662-3 11662-3 11662-3 11662-3 11662-3 11662-3 11662-3 11662-3 11662-3 11662-2 11662-2 11662-2 11662-2 33948-5 33948-3 33948-3 33948-6 33948-6 33948-2 33948-4 33948-1 33948-1 Cable Type Number Hanger Type Number No Ice 3.5 (1.07) 4.5 (1.37) 4.5 (1.37) 5.5 (1.68) 5.5 (1.68) 5.5 (1.68) 5.5 (1.68) 5.5 (1.68) 5 (1.52) 5.5 (1.68) 5.5 (1.68) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 5.5 (1.68) 5.5 (1.68) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) Recommended Maximum Hanger Spacing, feet (meters) 85 mph (137 km/h) 1/2" (13 mm) 1" (25 mm) 2 (0.61) 2.5 (0.76) 2.5 (0.76) 3.5 (1.07) 3.5 (1.07) 3.5 (1.07) 3.5 (1.07) 3.5 (1.07) 3 (0.91) 3.5 (1.07) 3.5 (1.07) 4 (1.22) 4 (1.22) 4 (1.22) 4 (1.22) 3.5 (1.07) 3.5 (1.07) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 1.5 (0.46) 2 (0.61) 2 (0.61) 2.5 (0.76) 2.5 (0.76) 2.5 (0.76) 2.5 (0.76) 2.5 (0.76) 2.5 (0.76) 3 (0.91) 3 (0.91) 3.5 (1.07) 3.5 (1.07) 3.5 (1.07) 3.5 (1.07) 3 (0.91) 3 (0.91) 5.5 (1.68) 5.5 (1.68) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) No Ice 100 mph (160 km/h) 1/2" (13 mm) 1" (25 mm) 1.5 (0.46) 2 (0.61) 2.5 (0.76) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 2.5 (0.76) 3 (0.91) 3 (0.91) 3.5 (1.07) 3.5 (1.07) 3.5 (1.07) 3.5 (1.07) 3 (0.91) 3 (0.91) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 1 (0.30) 1.5 (0.46) 1.5 (0.46) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2.5 (0.76) 2.5 (0.76) 2.5 (0.76) 2.5 (0.76) 2.5 (0.76) 2.5 (0.76) 2.5 (0.76) 2.5 (0.76) 4.5 (1.37) 5 (1.52) 5.5 (1.68) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83)
3 (0.91) 4 (1.22) 4 (1.22) 4.5 (1.37) 5 (1.52) 5 (1.52) 5 (1.52) 5 (1.52) 4 (1.22) 4.5 (1.37) 4.5 (1.37) 5 (1.52) 5 (1.52) 5 (1.52) 5 (1.52) 4.5 (1.37) 4.5 (1.37) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83)
596
The maximum spacing recommendations assume that all hangers are properly installed and tightened. Recommendations for a 150 ft (46 m) tower with 125 mph (200 km/h) wind speed and 1/2" radial ice (typical conditions) are highlighted in red. See Hanger Spacing Considerations, page 593 for further information. Insulated Hangers Recommended Maximum Hanger Spacing
Cable Size Wind Speed: Radial Ice: 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 7/8" 7/8" 7/8" 7/8" 1-1/4" 1-5/8" 1-5/8" 2-1/4" 2-1/4" 3" 4" 5" 5" FSJ1-75A HST1-50 LDF1-50 EFX2-50 ETS2-50 FSJ2-50 HS2RP-50 HST2-50 LDF2-50 FSJ4-50B FSJ4-75A LDF4-50A LDF4-75A HL4RP-50 HLT4-50 HS4RP-50 HST4-50 HT4-50 HJ4-50 LDF5-50A HJ5-50 HJ5-75 HT5-50 LDF6-50 HJ7-50A LDF7-50A HJ12-50 LDF12-50 HJ8-50B HJ11-50 HJ9-50 HJ9HP-50 11662-3 11662-3 11662-3 11662-3 11662-3 11662-3 11662-3 11662-3 11662-3 11662-3 11662-3 11662-3 11662-3 11662-3 11662-3 11662-3 11662-3 11662-3 11662-3 11662-2 11662-2 11662-2 11662-2 33948-5 33948-3 33948-3 33948-6 33948-6 33948-2 33948-4 33948-1 33948-1 Cable Type Number Hanger Type Number Recommended Maximum Hanger Spacing, feet (meters) 125 mph (200 km/h) No Ice 1/2" (13 mm) 1" (25 mm) 2.5 (0.76) 3 (0.91) 3 (0.91) 3.5 (1.07) 4 (1.22) 4 (1.22) 4 (1.22) 4 (1.22) 3.5 (1.07) 3.5 (1.07) 3.5 (1.07) 4 (1.22) 4 (1.22) 4 (1.22) 4 (1.22) 3.5 (1.07) 3.5 (1.07) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 4.5 (1.37) 4.5 (1.37) 1 (0.30) 1.5 (0.46) 2.5 (0.76) 2 (0.61) 2.5 (0.76) 2.5 (0.76) 2 (0.61) 2 (0.61) 2 (0.61) 2.5 (0.76) 2.5 (0.76) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 2.5 (0.76) 2.5 (0.76) 5 (1.52) 6 (1.83) 5.5 (1.68) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 4.5 (1.37) 4.5 (1.37) 1 (0.30) 1 (0.30) 1.5 (0.46) 1.5 (0.46) 1.5 (0.46) 1.5 (0.46) 1.5 (0.46) 1.5 (0.46) 1.5 (0.46) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 3.5 (1.07) 4 (1.22) 4.5 (1.37) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 5.5 (1.68) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 4.5 (1.37) 4.5 (1.37) No Ice 150 mph (240 km/h) 1/2" (13 mm) 1" (25 mm) 1 (0.30) 1.5 (0.46) 1.5 (0.46) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 1.5 (0.46) 2 (0.61) 2 (0.61) 2.5 (0.76) 2.5 (0.76) 2.5 (0.76) 2.5 (0.76) 2 (0.61) 2 (0.61) 4 (1.22) 6 (1.83) 4.5 (1.37) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 5 (1.52) 3.(0.91) 3.(0.91) 0.5 (0.15) 1 (0.30) 1 (0.30) 1.5 (0.46) 1.5 (0.46) 1.5 (0.46) 1.5 (0.46) 1.5 (0.46) 1 (0.30) 1.5 (0.46) 1.5 (0.46) 1.5 (0.46) 1.5 (0.46) 1.5 (0.46) 1.5 (0.46) 1.5 (0.46) 1.5 (0.46) 3 (0.91) 3 (0.91) 3.5 (1.07) 5 (1.52) 5 (1.52) 5.5 (1.68) 6 (1.83) 4.5 (1.37) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 4.5 (1.52) 3 (0.91) 3 (0.91)
2 (0.61) 2.5 (0.76) 2.5 (0.76) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 2.5 (0.76) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 6 (1.83) 6 (1.83) 5 (1.52) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 6 (1.83) 5 (1.52) 3 (0.91) 3 (0.91)
597
The maximum spacing recommendations assume that all hangers are properly installed and tightened. Recommendations for a 150 ft (46 m) tower with 125 mph (200 km/h) wind speed and 1/2" radial ice (typical conditions) are highlighted in red. See Hanger Spacing Considerations, page 593 for further information.
Click-On Hangers Recommended Maximum Hanger Spacing

Cable Size Wind Speed: Radial Ice: 1/2" 1/2" 1/2" 5/8" 5/8" 5/8" 7/8" 7/8" 7/8" 1-1/4" 1-1/4" 1-1/4" 1-5/8" 1-5/8" 1-5/8" Wind Speed: Radial Ice: 1/2" 1/2" 1/2" 5/8" 5/8" 5/8" 7/8" 7/8" 7/8" 1-1/4" 1-1/4" 1-1/4" 1-5/8" 1-5/8" 1-5/8" LDF4-50A LDF4-50A LDF4-50A LDF4.5-50 LDF4.5-50 LDF4.5-50 LDF5-50A LDF5-50A LDF5-50A LDF6-50 LDF6-50 LDF6-50 LDF7-50A LDF7-50A LDF7-50A L4CLICK, 1-Stack L4CLICK, 2-Stack L4CLICK, 3-Stack L45CLICK, 1-Stack L45CLICK, 2-Stack L45CLICK, 3-Stack L5CLICK, 1-Stack L5CLICK, 2-Stack L5CLICK, 3-Stack L6CLICK, 1-Stack L6CLICK, 2-Stack L6CLICK, 3-Stack L7CLICK, 1-Stack L7CLICK, 2-Stack L7CLICK, 3-Stack LDF4-50A LDF4-50A LDF4-50A LDF4.5-50 LDF4.5-50 LDF4.5-50 LDF5-50A LDF5-50A LDF5-50A LDF6-50 LDF6-50 LDF6-50 LDF7-50A LDF7-50A LDF7-50A L4CLICK, 1-Stack L4CLICK, 2-Stack L4CLICK, 3-Stack L45CLICK, 1-Stack L45CLICK, 2-Stack L45CLICK, 3-Stack L5CLICK, 1-Stack L5CLICK, 2-Stack L5CLICK, 3-Stack L6CLICK, 1-Stack L6CLICK, 2-Stack L6CLICK, 3-Stack L7CLICK, 1-Stack L7CLICK, 2-Stack L7CLICK, 3-Stack Cable Type Number Hanger Type* and Stack Configuration Recommended Maximum Hanger Spacing, feet (meters) 85 mph (137 km/h) No Ice 1/2" (13 mm) 1" (25 mm) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 4 (1.22) 4 (1.22) 4 (1.22) 4 (1.22) 4 (1.22) 3 (0.91) 4 (1.22) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 4 (1.22) 4 (1.22) 4 (1.22) 4 (1.22) 4 (1.22) 3 (0.91) 4 (1.22) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 4 (1.22) 4 (1.22) 4 (1.22) 4 (1.22) 4 (1.22) 3 (0.91) 4 (1.22) 3 (0.91) 3 (0.91) No Ice 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 100 mph (160 km/h) 1/2" (13 mm) 1" (25 mm) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91)
Note: These same hanger spacing recommendations apply for the other following 1/2" cable types: LDF4-75A, HL4RP-50, HLT4-50, HS4RP-50, HST4-50, HT4-50, HJ4-50
Note: These same hanger spacing recommendations apply for the other following 5/8" cable types: HJ4.5-50
Note: These same hanger spacing recommendations apply for the other following 7/8" cable types: VXL5-50, HJ5-50, HJ5-75, HT5-5.
Note: These same hanger spacing recommendations apply for the other following 1 5/8" cable types: HJ7-50A
No Ice 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 2 (0.61) 3 (0.91) 3 (0.91) 2 (0.61) 3 (0.91) 3 (0.91) 2 (0.61) 3 (0.91) 2 (0.61) 2 (0.61)
125 mph (200 km/h) 1/2" (13 mm) 1" (25 mm) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 2 (0.61) 3 (0.91) 3 (0.91) 2 (0.61) 3 (0.91) 3 (0.91) 2 (0.61) 3 (0.91) 2 (0.61) 2 (0.61) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 3 (0.91) 2 (0.61) 3 (0.91) 3 (0.91) 2 (0.61) 3 (0.91) 3 (0.91) 2 (0.61) 3 (0.91) 2 (0.61) 2 (0.61)
No Ice 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61)
150 mph (240 km/h) 1/2" (13 mm) 1" (25 mm) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61) 2 (0.61)
Note: These same hanger spacing recommendations apply for the other following 1/2" cable types: LDF4-75A, HL4RP-50, HLT4-50, HS4RP-50, HST4-50, HT4-50, HJ4-50
Note: These same hanger spacing recommendations apply for the other following 5/8" cable types: HJ4.5-50
Note: These same hanger spacing recommendations apply for the other following 7/8" cable types: VXL5-50, HJ5-50, HJ5-75, HT5-50
Note: These same hanger spacing recommendations apply for the other following 1 5/8" cable types: HJ7-50A. * These hanger spacings have been specified based on using the Click-On hangers with Andrew specified hardware kits. Definitions and Assumptions 1. Per EIA-222 Standard: Coefficient of drag for coaxial cable is 1.2 (cylindrical members). Ice forms completely around member (360 degrees). Combined wind and ice loading is reduced by 25% to reflect lower probability of wind and ice occuring simutaneously. 2. Wind speeds are maximum, which includes gust factors and exposure factors.
598
Hangers and Cable Ties
Andrew offers a wide variety of hangers and cable ties for reliable and convenient support of HELIAX coaxial cables. Standard Hangers feature great strength and long term reliability. They are ideal for general purpose use. Insulated Hangers are for use on insulated towers. Snap-In Hangers offer quickest and easiest installation for cable sizes 1/2" to 2-1/4". Click-On Hangers support two cables and are stackable up to three high (six cables). They are easy to install and are ideal for towers with limited space. KwikClamp Hangers attach one, two or three cable runs to a tower without the need for adapters or drilling holes. Nylon Cable Ties are lowest cost for cables 1/2" and smaller. They are ideal for 1/4" and 3/8" cable and for temporary installations. Velcro* Cable Ties are the easiest way to organize jumpers within and between radio cabinets.
* Velcro is a registered trademark of Velcro Industries.
Standard Hanger
Insulated Hanger
Snap-In Hanger
Click-On Hangers
KwikClamp Hangers
Cable Ties
599
Standard Hangers and Adapters

Cable Gripping Tabs Prevent cable slippage without the need for a permanently installed hoisting grip. Pre-Assembled and Captivated Hardware Eliminates the need for field assembly. Springlike Flexibility Makes it easy to form the hanger around the cable and dampens vibration for long life. Heavy Gauge Stainless Steel Construction High strength and excellent corrosion resistance for long-term reliability. Standard HELIAX hangers are designed for easy installation. The clamp locking bolt and nut are preassembled and captivated to minimize installation labor. Proper tension is easy to determine. The hanger is simply tightened until there is a 5/16" gap between the clamp legs. The pre-drilled hole for 3/8" or 1/2" mounting hardware and slots for round member adapter clamps further simplify installation. Many accessories are available to adapt these hangers to most tower configurations.
Standard Hangers and Adapters for 1/2" to 4" Cables

Hangers for 1/2" to 4" HELIAX cables use 3/8" hardware for attachment to towers or adapters. Hanger Kit of 10 pieces. Stainless steel. 3/8" mounting hardware not included.
Cable Size 1/2" 5/8" 7/8" 1-1/4" 1-5/8" 2-1/4" 3" 4" Maximum Spacing Refer to table on page 594 Photo Ref. A B B B B B C C Type Number 43211A 42396A-9 42396A-5 42396A-1 42396A-2 42396A-4 31766A-11 31766A-10
F Angle Adapter, Stainless Steel, kit of 10 pieces. For mounting cable 1/2" to 4" cable hangers to angle tower members up to 7/8" (22mm) thick. Includes hanger attachment hardware. See page 570 for bulk packs 3/8" Hardware ..........................................Type 31768A Metric Hardware .................................Type 31768A-M G Angle Adapter, Galvanized, kit of 10 pieces. For mounting cable 1/2" to 2-1/4" cable hangers to angle tower members up to 3/4" (19 mm) thick. Includes hanger attachment hardware. 3/8" Hardware, kit of 10 ...........................Type 242774 Metric Hardware, kit of 10 ...................Type 242774-M H 45 Adapter Kit of 10. Use with angle adapter and threaded rod support kit to place a hanger at a waveguide bend. Galvanized steel .............Type 42334 I Round Member Adapter Kit of 10 pieces. Stainless steel clamps to mount 1/2" to 4" cable hangers to round support members. Two each are needed for 3" and 4" cable hangers.
Member Diameter, in (mm) 1 - 2 (25 - 50) 2 - 3 (50 - 75) 3 - 4 (75 - 100) 4 - 5 (100 - 125) 5 - 6 (125 - 150) 6 - 8 (150 - 200) Type Number 31670-1 31670-2 31670-3 31670-4 31670-5 31670-6
D Hardware Kit of 10 sets. 3/8" fillister-head bolts, lock washers and nuts for attachment of hangers to drilled tower members. 3/4" (19 mm) long .................................Type 31769-5 1" (25 mm) long .....................................Type 31769-1 E Compact Angle Adapters, Stainless Steel. The adapters are suitable for use with single runs of HELIAX cable up to 2-1/4" diameter. When used with our stackable, Click-On hangers, they can accommodate up to six runs of LDF6 (1-1/4") or smaller and up to four runs of LDF7 (1-5/8") HELIAX cables. 3/8" Hardware ..........................................Type 243684 Metric Hardware ..................................Type 243684-M
600
Standard Hangers and Adapters
J Tower Standoff Kit of 10 pieces. Adapters with round member clamps and hardware for 1/2" to 4" hangers. All parts are stainless steel or galvanized.
Member Diameter in (mm) 0.75 - 1.5 (20 - 40) 1.5 - 3.0 (40 - 75) 3 - 4 (75 - 100) 4 - 5 (100 - 125) 5 - 6 (125 - 150) 1 in (25 mm) Standoff 30848-5 30848-4 30848-1 30848-2 30848-3 2.5 in (60 mm) Standoff 41108A-1 41108A-2 41108A-3
M Support/Hoisting Grip. Use at 200 ft (60 m) intervals to raise cable and provide permanent cable support. Basic kit includes one grip and one support clamp. Support clamps are also available in kits of 10. Installation tool is required .......................Type SG-IT
For Cable Type 1/4" FSJ1 1/4" LDF1 3/8" EFX2 3/8" LDF2 3/8" FSJ2 1/2" FSJ4 1/2" LDF4 5/8" LDF4.5 7/8" LDF5/VXL5 1-1/4" LDF6/VXL6 1-5/8" LDF7/VXL7 2-1/4" LDF12 Grip with One Clamp F1SGRIP L1SGRIP E2SGRIP L2SGRIP F2SGRIP F4SGRIP L4SGRIP L45SGRIP L5SGRIP L6SGRIP L7SGRIP L12SGRIP Support Clamp Kit of 10 F1SGRIP-1IK L1SGRIP-1IK E2SGRIP-2IK L2SGRIP-2IK F2SGRIP-2IK F4SGRIP-4IK L4SGRIP-4IK L45SGRIP-45IK L5SGRIP-5IK L6SGRIP-6IK L7SGRIP-7IK L12SGRIP-12IK
K Threaded Rod Support Kit. Use to mount hangers away from supporting structure, under cable bridge and inside equipment room. Includes 3/8" diameter threaded rod, galvanized ceiling mounting plate, nuts and washers. Attach to angle tower members with 31768A angle adapters. Attach to round tower members with 30848 series tower standoffs. All components are stainless steel, except ceiling mounting plate.
Rod Length in (mm) 12 (305) 24 (610) 36 (915) Kit of 1 31771 31771-9 Kit of 5 31771-4 31771-6 31771-10
Standard Hangers and Adapters for 5" Cables

Hangers for 5" HELIAX cables use 1/2" hardware for attachment to towers or adapters. Hanger Kit of 10 pieces. Galvanized steel. 1/2" mounting hardware not included. Refer to page 594 for maximum spacing ......................................................Type 33598-5 A Hardware Kit of 10 pieces 1/2" x 1-1/4" (32 mm) bolts, lockwashers, and nuts for attachment of 5" hangers to drilled tower members .........Type 31769-4 B Angle Adapter Kit of 10 pieces. Stainless steel. For mounting 5" cable hangers to angle tower members up to 7/8" (22 mm) thick .....................Type 33981A-1
L Hoisting Grip. Use at 200 ft (60 m) intervals to raise cable on tower. Use with optional support clamp to achieve optimum cable grip.
Cable Size 1/2" 5/8" 7/8" 1-1/4" 1-5/8" 2-1/4" 3" 4" 5" Hoisting Grip Type Number 43094 29958 19256B 29961 24312A 31535 26985A 34759 31031-1 Optional Support Clamp Type Number F4SGRIP-4IK L45SGRIP-45IK L5SGRIP-5IK L6SGRIP-6IK L7SGRIP-7IK L12SGRIP-12IK
601
Insulated Hangers and Adapters
A Insulated Hanger for 1/4" to 7/8" Cables, Single. For use on insulated tower. Refer to tables on pages 596 and 597 for maximum spacing. For 1/4", 3/8" and 1/2" cables .................Type 11662-3 For 7/8" cable .........................................Type 11662-2 B Insulated Hanger for 1-1/4" - 5" Cables Single. For use on insulated tower.
Cable Size 1-1/4" 1-5/8" 2-1/4" 3" 4" 5" Max. Spacing Refer to tables on pages 596 and 597. Type Number 33948-5 33948-3 33948-6 33948-2 33948-4 33948-1
D Threaded Rod Support Kit of 5 pieces. 1/2" x 12" (305 mm) threaded rods, ceiling mounting plates, nuts and washers for suspending 5" cable hangers. All parts are stainless steel except galvanized ceiling mounting plate .......................................Type 31771-5 Angle Adapter Single. For insulated hangers. Maximum member thickness 7/8 in (22 mm). E For 1/2" and 7/8" cable ...........................Type 40430-1 F For 1-1/4" - 5" cable ................................Type 13555A G Round Member Adapter Single. For use with Type 33948 series (1-1/4"-5" cables) insulated hangers. Fits member diameters 1-3 in (25 - 75 mm). ...................................................................Type 13550 H Stainless Steel Wraplock 100 feet complete with fasteners. Use to attach 1/4" - 7/8" insulated hangers to round members. Not to be used to attach cable or waveguide directly to towers..............Type 12395-1
C Round Member Adapter/Tower Standoff Kit of 10 pieces. For mounting 5" cable hangers to round support members. HELIAX cable to clear tower leg flanges. Provides 2.5 in (60 mm) standoff. All parts are stainless steel or galvanized.
Member Diameter, in (mm) 3 - 4 (75 - 100) 4 - 5 (100 - 125) 5 - 6 (125 - 150) Type Number 43130-1 43130-2 43130-3
602
Snap-In Hangers and Adapters

Snap-In Hangers
Attach Without Hardware Quick and easy attachment in all types of weather. The hangers snap directly into holes in the tower support members (patents pending). Installation time and cost are substantially reduced. Heavy Gauge Stainless Steel Construction High strength and excellent corrosion resistance for long-term reliability. Snap-In hangers are ideal for microwave, cellular, PCS/PCN, and land mobile radio systems. They are available for 1/2" to 2-1/4" size coaxial cables. The hanger is designed to be installed into 3/4" holes in support structures 0.120 to 0.150 inch thick. Ergonomically designed for easy installation, the hangers retention tabs make the hanger highly resistant to pull. The hanger is mounted directly to tower support members by inserting its retention tabs into pre-punched holes in cable support systems.
Snap-In hangers can be used on any tower, by using the specially designed adapters described below. Guyed tower transmission support systems can also accommodate Snap-In hangers, when specified. Made of heavy gauge stainless steel. For hanger spacing recommendations, refer to page 595. Kit of 10 Hangers
Cable Size 1/2" 5/8" 7/8" 1-1/4" 1-5/8" 2-1/4" Type Number 206706-1 206706A-6 206706-2 206706-3 206706-4 206706-5
Snap-In Adapters
A Tower/Hanger Adapter cable support attaches to existing angle tower members. Includes angle support pre-punched with 3/4" and 7/16" holes to accommodate Snap-In hanger, and standard hanger.
Number of Cable Runs 1 4 8 J-Bolt or Angle Adapter Connections Required 1 2 3 Type No. 206929-1 206929-4 206929-8
B J-Bolt Hardware, Kit of 10 for attaching Tower/Hanger Adapter to 1-1/4" to 2-3/4" (32-70 mm) angle tower members. Includes J-bolt, flat washers, lock washers and nuts ..................................................Type 206930 C Angle Adapter, Kit of 10. For attaching Tower/Hanger Adapter to angle tower members. Stainless Steel, 3/8" hardware ................Type 31768A D Cluster Mount**. Octagonal cable support for one to seven cable runs attaches to 1-1/2" nominal steel pipe or 1.90" (48 mm) round tower members. Pre-punched with 3/4" and 7/16" holes to accommodate snap-in hangers and standard hangers. Supplied mounting hardware kit includes 3/8" plated bolts, flat washers, lock washers and nuts. Kit of 1 ....................................................Type 207030 Kit of 10 ..............................................Type 207030-2
U.K. 0800-250055 Australia 1800-803 219 New Zealand 0800-441-747 B C
** Patented United States 4,813,639
603
Snap-In Adapters
7/16" (11 mm) dia hole for attaching cover 1/4" (6 mm) dia hole for grounding wire
Snap-In Hanger
3/4" (19 mm) dia hole for Snap-In Hanger
4" (102 mm)
A B
4" (102 mm)
Length
Included 1/2" hardware
Angle-leg or Pipe-leg
3/4" (19 mm) diameter holes Snap-in Hangers 7/16" (11 mm) diameter holes for Cushion Hangers 2-1/2" (64 mm) 2-1/2" (64 mm)
G E
A Snap-In Angle Adapter Kit of 10 pieces. Includes 3/4" pre-punched hole for mounting snap-in hangers to angle tower members. Stainless steel, 3/8" hardware ......................................................Type SAA B Snap-In Adapter Block Kit of 10 pieces. Mounts up to three snap-in hangers. Attach to tower using Type 31768A angle adapter or tower standoffs. Mechanically galvanized hardware .............Type SHA3 C Snap-In Tower Standoffs Kit of 10 pieces. Mounts snap-in hangers to round tower members and provides 2-1/2 in (64 mm) standoff. Includes 3/4" pre-punched hole. All parts stainless steel or galvanized.
Member Diameter, in (mm) 1-2 (25-50) 2-3 (50-75) 3-4 (75-100) 4-5 (100-125) Type STS-12 STS-23 STS-34 STS-45
E Universal Snap-In Brackets for both angle and round tower members. Pre-punched with 3/4" holes to mount up to twelve snap-in hangers. Galvanized steel.
Angle Member 2-1/2" to 4" 5" to 6" 8" Round Member Diameter 1-1/2" to 5-9/16" 6" to 8-5/8" 10-3/4" to 12-3/4" Type No. HAA-B2249 HAA-B2250 HAA-B2251
F Snap-In Adapter Brackets for large round members, water towers, or on the outside of a monopole. Mount up to three cable runs and are compatible with both snap-in and standard hangers. Use multiple brackets for additional runs. Use in conjunction with wraplock. The brackets slide on the wraplock. .........................................................Type HAA-B2391 G Stainless Steel Wraplock 100 feet complete with fasteners. Use to attach 1/4" - 7/8" insulated hangers to round members. Not to be used to attach cable or waveguide directly to towers..............Type 12395-1
D PVC Roof Sleeper, supports rooftop coax runs. Constructed of gray, UV resistant PVC. 4 in x 4 in (102 mm x 102 mm).
Number of Cable Runs 4 8 12 Dimensions, in (mm) 22 (559) 31.9 (810) 43.4 Type No. RTA-B1598 RTA-B1599 RTA-B1600
604
Click-On Hangers
Install Cable with One Easy Click Click-on Hangers* are specifically designed to support HELIAX coaxial cable. They are stackable, install in just minutes, and provide a perfect fit that gives your PCS/PCN, cellular, microwave, rural telephony, GSM, or other telecommunications system a professional appearance, especially in confined spaces. The hangers are made of tough, UV-resistant material and set the standard for durability, simplicity of installation, and cost-effectiveness. Only two wrenches are required for installation. Refer to table on page 598 for maximum spacing.
*Patented United States No, 5794897
Click-On Hangers Ordering Information Kits of 10 Cable Size 1/2" 5/8" 7/8" 1-1/4" 1-5/8" Cable Type LDF4-50A LDF4.5-50A LDF5-50A LDF6-50 LDF7-50A Hanger Type Number L4CLICK L45CLICK L5CLICK L6CLICK L7CLICK
Click-On Hanger Hardware Kits

Click-On hanger attachment hardware is available in 3/8" or M10 sizes. Constructed of stainless steel for durability. Select hardware length according to planned hanger stack height.
Hardware Kit Ordering Information Cable Size Stack Height (Hangers) Type Number M10 Kit Type Number 3/8" Kit
Tower and Pole Adapters

The round pole adapter attaches Click-On hangers to round member diameters 7-1/2 to 10 in (190-250 mm). Attachment hardware is sold separately. For wood poles, use lag screws. For metal poles, use Wraplock.
Adapter Ordering Information Description Type No. 244338 243684 243684-M 244350 12395-1
1/2", 5/8" or 7/8" Cable 1 2 3 1-1/4" or 1-5/8" Cable 1 2 3 243095-12 243095-8 243095-4 243095-10 243095-6 243095-2 243095-11 243095-7 243095-3 243095-9 243095-5 243095-1
Round Member Adapter, universal, kit of 10 Compact Angle Adapter, kit of 10 3/8" Hardware M10 Hardware Ceiling Adapter Stainless Steel Wraplock, 100 ft (305 m)
605
Click-On Hangers and Adapters

Flat Member Attachment
Flat Washer and Lock Washer
Angle Adapter Attachment
Click-On Hanger
Flat Washers and Nut
Click-On Hanger
Flat Washer, Nut and Lockwasher
Nut Nut, Lock Washer and Flat Washer Nut, Lock Washer and Flat Washer
Angle Adaptor Threaded Rod Flat Member Threaded Rod
Round Adapter Attachment

Nut Click-On Hanger Flat Washer, Nut and Lock Washer
Ceiling Adapter Attachment
Hex Nut Ceiling Adaptor Lock Washer, Nut and Flat Washer
Nut, Lock Washer and Flat Washer
Tower Standoff Click-On Hanger
Threaded Rod
Click-On Hanger
Flat Washer, Nut and Lock Washer
Flat Washer, Lock Washer and Nut
Threaded Rod
Nut, Lock Washer and Flat Washer
Tower Standoff Threaded Rod
Hex Nut
606
KwikClamp Hangers
Install Multiple Cable Runs in a Limited Space.

KwikClamp hangers attach one, two or three cable runs to a tower without the need for adapters or drilling holes. They are ideal for use on crowded towers. These selfclamping hangers attach directly to angle, round, flat, or channel tower members, providing sturdy, reliable, long-term support.
Angle KwikClamp
Round/Flat KwikClamp
Channel KwikClamp
KwikClamp Hanger Ordering Information

Tower Member Type 8-23 mm Round or 2-23 mm Flat Plate 40 mm Angle Number of Runs 1 2 3 1 2 3 1 2 3 1 2 3 1/2" LDF Type No. L4CLAMP-RDN-1 L4CLAMP-RDN-2 L4CLAMP-RDN-3 L4CLAMP-ANG40-1 L4CLAMP-ANG40-2 L4CLAMP-ANG40-3 L4CLAMP-ANG50-1 L4CLAMP-ANG50-2 L4CLAMP-ANG50-3 L4CLAMP-CNL-1 L4CLAMP-CNL-2 L4CLAMP-CNL-3 5/8" LDF Type No. L45CLAMP-RDN-1 L45CLAMP-RDN-2 L45CLAMP-RDN-3 L45CLAMP-ANG40-1 L45CLAMP-ANG40-2 L45CLAMP-ANG40-3 L45CLAMP-ANG50-1 L45CLAMP-ANG50-2 L45CLAMP-ANG50-3 L45CLAMP-CNL-1 L45CLAMP-CNL-2 L45CLAMP-CNL-3 7/8" LDF/VXL Type No. L5CLAMP-RDN-1 L5CLAMP-RDN-2 L5CLAMP-RDN-3 1-1/4" LDF Type No. L6CLAMP-RDN-1 L6CLAMP-RDN-2 L6CLAMP-RDN-3 1-5/8" LDF Type No. L7CLAMP-RDN-1 L7CLAMP-RDN-2 L7CLAMP-RDN-3 L7CLAMP-ANG40-1 L7CLAMP-ANG40-2 L7CLAMP-ANG40-3 L7CLAMP-ANG50-1 L7CLAMP-ANG50-2 L7CLAMP-ANG50-3 L7CLAMP-CNL-1 L7CLAMP-CNL-2 L7CLAMP-CNL-3
L5CLAMP-ANG40-1 L6CLAMP-ANG40-1 L5CLAMP-ANG40-2 L6CLAMP-ANG40-2 L5CLAMP-ANG40-3 L6CLAMP-ANG40-3 L5CLAMP-ANG50-1 L6CLAMP-ANG50-1 L5CLAMP-ANG50-2 L6CLAMP-ANG50-2 L5CLAMP-ANG50-3 L6CLAMP-ANG50-3 L5CLAMP-CNL-1 L5CLAMP-CNL-2 L5CLAMP-CNL-3 L6CLAMP-CNL-1 L6CLAMP-CNL-2 L6CLAMP-CNL-3
50 mm Angle
Channel Section 40 x 22 x 1.5 mm
607
Cable Ties
Nylon Cable Tie Kit of 50 pieces. Weather-resistant straps for attaching 1/4" to 1/2" cables. Maximum spacing 3 ft (1 m) for HJ and LDF series and 18" (457 mm) for FSJ series cables. ..................................................Type 40417 Nylon Cable Tie Kit in Plastic Box. Black, weather-resistant cable ties. Kits are packaged in a reusable plastic box and organized for quick selection. Includes: Quantity 100, 4" (101 mm) cable ties, 18 lb (80 N) tensile strength Quantity 100, 5.5" (140 mm) cable ties, 40 lb (178 N) tensile strength Quantity 100, 7.5" (190 mm) cable ties, 50 lb (222 N) tensile strength 50 adhesive-backed black mounts ........Type CT-K350
Nylon Cable Tie Kit in Plastic Box
Nylon Cable Tie
Nylon Cable Tie Installation Tool. For use with Type CT-K350, above. Tightens and trims cable tie in one process with one hand. Cuts ties flush with a simple 1/4 turn downward twist. Top loading for right or left hand users .......................................................Type CT-IT Jacketed Cable Tie Kit of 20 pieces. Weather-resistant ties for attaching FSJ Series cable directly to tower members. Maximum spacing 18" (457 mm) .................................................................Type 27290A Velcro* Cable Ties. The easiest way to organize inter-rack cabling. Secure in high-vibration areas. No special tying procedure required. Can be reused to accommodate future expansion. Black, 8" (203 mm) length. Maximum bundle diameter, 2" (51 mm). Minimum bundle diameter, 0.25" (6.4 mm). Tensile strength, 40 lb (178 N). For indoor use only. Kit of 10..................................................Type VCT8-10 Kit of 50 ................................................Type VCT8-50 Kit of 100 .............................................Type VCT8-100
* Velcro is a registered trademark of Velcro Industries.
Nylon Cable Tie Installation Tool
Jacketed Cable Tie
Velcro Cable Ties
608
Grounding Kits
Standard Grounding Kit
SureGround Kit
SureGround Plus Kit
A well designed system uses grounding kits to provide a bond between the cable and the tower/earth ground system. One grounding kit is recommended at tower top, tower bottom, at 200 ft (60 m) intervals (where applicable), and at the entrance to the equipment shelter. SureGround and SureGround Plus Series and 204989 and 241088 Series Grounding Kits offer: Solid copper construction for high current handling capability, compatibility with copper cable outer conductors, and long life. Meet military standards at commercial prices. Provide certainty of continued operation. Tested at an independent laboratory to withstand 200,000 amps. Andrew 204989 and 241088 series solid copper grounding kits have passed United States Air Force lightning simulation tests and meet MIL-STD-188-124A. The non-braided solid copper construction of all Andrew grounding kits eliminates corrosion caused by moisture retention and wicking. A heat shrink tube protects the cable terminal connection.
Easy Installation Standard Grounding Kits (204989 and 241088 series) require few steps to install and include easy to follow instructions. Proper tensioning is ensured by an expansion section which provides visual indication that the strap is secured. SureGround Grounding Kits install in less than half the time required for standard grounding kits. Factory assembled into one component, they feature a pre-formed clip-on grounding strap for easy, snap-on installation. SureGround Plus Grounding Kits are even easier to install. Simply remove a short length of cable jacketing, snap the wraparound strap in place, slip the rubber boot into place and secure with clamps.
Kits Include
Standard Grounding Kits for 1/2" and Larger Cables. Series 204989 and 241088 kits include a solid copper strap riveted to the grounding wire, a coiling tool for proper tightening, tower attachment hardware, and a two-part tape weatherproofing system. Field-attachable, crimp-on grounding lugs require the use of a crimping tool (not included, described below). Standard Grounding Kit for 1/4" and 3/8" Cables. Includes a solid copper strap, connection hardware, tower atachment hardware, and a two-part tape weatherproofing system ...............................Type 223158 SureGround Grounding Kit is a one-piece factory assembled ground strap which includes a two-part tape weatherproofing system. SureGround Plus Grounding Kits include a factory assembled ground strap, a preformed rubber boot and two clamps.
SureGround Plus Grounding kits

Transmission line grounding has never been easier. With only four parts, SureGround Plus grounding kits combine the exclusive wraparound SureGround grounding strap with a preformed rubber weatherproofing boot for fast, sure installation and neat appearance. Heavy Duty Ground Lead Andrew grounding kits utilize heavy duty 16 mm2 ground leads to maximize performance. The IEC 1024-1 compliant copper ground lead reduces dc resistance. The extremely pliable jacket provides protection and makes it easy to maneuver the lead into position for attachment to the down conductor.
609
Standard Grounding Kits
Lug and Wire Length Options for Grounding Kits

Kits are available with either factory attached lugs or field attachable lugs. Standard grounding kits feature field attachable lugs that are either crimp-on or screw-on. SureGround grounding kits have crimp-on field attachable lugs. One or two-hole lugs are available as indicated in the table. The holes on the two-hole lug fit common bus bar configurations with spacings of 0.750, 8.815 or 1.0 inch. All Andrew bus bars will accept both types of lugs. Universal Grounding Lug Kit of 10..............Type 244456 Grounding wire is available in a variety of lengths as indicated in the table. Crimping Tool. Used to attach crimp-on lugs for standard and SureGround series. Not required for kits having factory-attached lugs. .......................Type 207270 Standard Grounding Kits
With Factory Attached One-Hole Lug Type No. 24 in (610 mm) 223158 204989-1 204989-2 204989-3 204989-4 204989-5 204989-6 204989-7 With Factory Attached Two-Hole Lug Type No. 24 in (610 mm) 223158-2 241088-1 241088-2 241088-3 241088-4 241088-5 With FieldAttachable Crimp-On Two-Hole Lug Type No. 36 in (915 mm) 241088-6 241088-7 241088-8 241088-9 241088-10 Attachable Screw-On One-Hole Lug Type No. 36 in (915 mm) 204989-31 204989-32 204989-33 204989-34 204989-35 204989-36 204989-37
Cable Size Grounding Wire Length: 1/4" and 3/8" 1/2" 5/8" and 7/8" 1-1/4" 1-5/8" 2-1/4" and 3" 4" 5"
610
SureGround Grounding Kits
SureGround Grounding Kits

Cable Type Factory Attached One-Hole Lug Type No. Factory Attached Two-Hole Lug Type No. Field-Attachable Crimp-On One-Hole Lug Type No. Field-Attachable Crimp-On Two-Hole Lug Type No.
600 mm (24 in) Grounding Wire LDF4 LDF45 LDF5 LDF6 LDF7 LDF12 SGL4-06B1 SGL45-06B1 SGL5-06B1 SGL6-06B1 SGL7-06B1 SGL12-06B1 SGL4-06B2 SGL45-06B2 SGL5-06B2 SGL6-06B2 SGL7-06B2 SGL12-06B2
611
SureGround Plus Grounding Kits
SureGround Plus Grounding Kits

Cable Type Factory Attached One-Hole Lug Type No. Factory Attached Two-Hole Lug Type No. Field-Attachable Crimp-On One-Hole Lug Type No. Field-Attachable Crimp-On Two-Hole Lug Type No.
600 mm (24 in) Grounding Wire LDF4 LDF4.5 LDF5 LDF6 LDF7 LDF12 SGPL4-06B1 SGPL45-06B1 SGPL5-06B1 SGPL6-06B1 SGPL7-06B1 SGPL12-06B1 SGPL4-06B2 SGPL45-06B2 SGPL5-06B2 SGPL6-06B2 SGPL7-06B2 SGPL12-06B2
612
Universal Ground Bar

Universal Ground Bar
Mounting flexibility and central collecting point for grounding leads This competitively priced universal ground bar offers the mounting flexibility so often needed at wireless communications sites. The solid copper bar accommodates vertical and 90 degree mounting configurations and provides a central point to collect grounding leads. It is ideal for all grounding applications, including towers and building rooftops. Ground Bar,1/4 x 2-1/2 x 19-1/2 in ..........Type UGBKIT Ground Bar,1/4 x 2-1/2 x 12-1/2 in .......Type UGBKIT-2
Universal Arrestor Ground Bar Assembly

This pre-punched solid copper ground bar assembly simplifies mounting and grounding of surge arrestors inside the building. Instead of relying on individual wires or field-fabricated trapeze setups, the Andrew universal arrestor ground bar assembly provides a uniform mounting and grounding point for surge arrestors and grounding leads. The 1/8" copper ground bar assembly uses three horizontal members that can be oriented flat or upright, and adjusted vertically as needed to accommodate various surge arrestor types. Also included is a mounting kit which includes ceiling brackets, insulators, threaded rod, and hardware. Compatible with standard entry port sizes. Height adjustable bars. Solid copper construction. Accepts bulkhead or bolt grounded surge arrestors Accommodates one and two-hole grounding lugs. Eliminates the need for an internal buss bar.
Universal Arrestor Ground Bar Assembly Ordering Information

Number of Grounding Bars 3 3 3 3 3 3 Grounding Positions Per Bar 6 6 6 4 4 4 Type Number UGBA-DIN-36 UGBA-DINU-36 UGBA-N-36 UGBA-DIN-34 UGBA-DINU-34 UGBA-N-34
Punched for Arrestor Types All APTL Series, 7-16 DIN or Bolt Grounded APG and APM Series, 7-16 DIN or Bolt Grounded N Bulkhead or Bolt Grounded All APTL Series, 7-16 DIN or Bolt Grounded APG and APM Series, 7-16 DIN or Bolt Grounded N Bulkhead or Bolt Grounded
613
Lightning Surge Arrestors
Arrestor Plus Integrated, T-Series Lightning Surge Arrestors

The Arrestor Plus Integrated, T-Series Lightning Surge Arrestor is a one-piece surge arrestor/HELIAX connector. It uniquely combines the reliability of quarter-wave shorting stub technology with the proven performance of HELIAX connectors to deliver premium lightning protection in a single component. The integrated design of the Arrestor Plus reduces the number of components resulting in improved system performance and reduced system cost. Silver plating and high contact pressures throughout maintain low intermodulation levels a definite plus for todays wireless systems. Arrestor Plus is available for 7/8", 1-1/4", and 1-5/8" LDF cables as specified in the table.
U.S. and international patents pending.
Interface Type For LDF5-50A, 7/8" Foam-Dielectric Cable Bulkhead N Female Bulkhead 7-16 DIN Female For LDF6-50, 7/8" Foam-Dielectric Cable Bulkhead N Female Bulkhead 7-16 DIN Female For LDF7-50A, 7/8" Foam-Dielectric Cable Bulkhead N Female Bulkhead 7-16 DIN Female APTL7-BNF-(*) APTL7-BDF-(*) APTL6-BNF-(*) APTL6-BDF-(*) APTL5-BNF-(*) APTL5-BDF-(*) Type Number
Integrated Arrestor/Connector Design Insertion loss less than 0.1 dB Improved system performance Reduced component costs Easy installation
* Frequency band. Insert Detail Number from Operating Frequencies table.
Operating Frequencies Contact Andrew for current availability of

specific frequency bands. Frequency Band, MHz 800-870 824-900 824-960 870-960 1700-1900 1850-1990 Insertion Loss, dB < 0.1 < 0.1 < 0.1 < 0.1 < 0.1 < 0.1 Return Loss dB, Typical 28.0 28.0 28.0 28.0 28.0 28.0 Detail Number -6 -2 -1 -3 -11 -9
Completely weatherproof RingFlare connector design automatically flares the cable as the connector is tightened. Quarter-Wave Shorting Stub Technology Provides true multi-strike capability. Tests performed by independent laboratories verify that Arrestor Plus withstands in excess of 50 impulse current surges of 50 kA without product degradation. Reliable equipment protection Maintenance free
90 Mounting Bracket for APTL Series Arrestor Plus ................................................................Type 244847
614
Revised 12/00
Lightning Surge Arrestors

Arrestor Plus T-Series, Lightning Surge Arrestors
Compact profile ideal for installation in tight spaces Reliable equipment protection Excellent microwave performance. Low VSWR, low insertion loss Fully weatherproof Easy installation Available with Type N or DIN interfaces The new Arrestor Plus T-Series surge arrestor provides excellent lightning protection and outstanding RF performance, in a compact design, that is ideal for confined applications, indoors or outdoors. Using quarter-wave surge protection technology, this T-shaped arrestor offers true multistrike protection. For an applied current impulse at 20 kA (8 x 20 waveform), the throughput energy is less than 1 mJ. Silver plated components and high pressure contacts throughout also ensure low levels of intermodulation and excellent VSWR performance. The slim profile easily fits inside equipment enclosures. It it also fully weatherproof and is suitable for a variety of outdoor applications. The Arrestor Plus T-Series is supplied with a grounding stud which allows direct attachment to a ground lead or bus bar. Mounting flexibility is further enhanced by the variety of through hole configurations provided in the body of the arrestor. The T-Series is complemented with a full line of mounting adapters and accessories. Ordering Information
Interface Type N Male/N Male N Female/N Female N Female/N Male, Hex 7-16 DIN Female/7-16 DIN Female 7-16 DIN Female/7-16 DIN Male Type Number APT-NMNM-(*) APT-NFNF-(*) APT-NFNM-(*) APT-DFDF-(*) APT-DFDM-(*)
* Frequency band. Insert Detail Number from Operating Frequencies table.
Operating Frequencies
Frequency Band, MHz** 824-960 824-900 870-960 800-870 1700-1900 1850-1990 Insertion Loss, dB < 0.1 < 0.1 < 0.1 < 0.1 < 0.1 < 0.1 VSWR Max. 1.10 1.07 1.07 1.07 1.07 1.07 Detail Number -1 -2 -3 -6 -11 -9
** Additional frequencies available. Contact Andrew for availability.
APT Mounting Hardware Type N .............................................................Type 243394 DIN...................................................................Type 243396

U.K. 0800-250055 Australia 1800-803 219 New Zealand 0800-441-747 Visit us at: www.andrew.com
615
Replaceable Gas Tube Surge Arrestors
Arrestor Plus Replaceable Gas Tube Surge Arrestors

Offering broadband performance from 0-2500 MHz and excellent electrical characteristics, Arrestor Plus Replaceable Gas Tube Surge Arrestors are easy to install and feature a dc pass capability through the center conductor to power tower-top electronics. The unit's removable cap makes periodic maintenance fast and easy. Ordering Information
Interface Type Bulkhead 7-16 DIN Female and 7-16 DIN Female Bulkhead 7-16 DIN Female and 7-16 DIN Male Bulkhead Type N Female and Type N Female Bulkhead Type N Female and Type N Male Gas Tube Static Sparkover Voltage 90 230 350 90 230 350 90 230 350 90 230 350 1000 Type Number APG-BDFDF-090 APG-BDFDF-230 APG-BDFDF-350 APG-BDFDM-090 APG-BDFDM-230 APG-BDFDM-350 APG-BNFNF-090 APG-BNFNF-230 APG-BNFNF-350 APG-BNFNM-090 APG-BNFNM-230 APG-BNFNM-350 APGHP-BNFNM-1000
New SureFlex Arrestor Plus Cable Assemblies

Both the Quarter Wave Shorting Stub (QWS) surge arrestors and broadband replaceable gas tube arrestors are available in combination with the new Sureflex cable assemblies. These cable assemblies include all the benefits of SureFlex plus the protection of an integrated Arrestor Plus surge arrestor. SureFlex cable assemblies unique connector attachment includes a solder connection to both the inner and the outer conductors. The automated attachment process employs an induction soldering technique that ensures 360 degrees of electrical contact and a reliable weather seal. This process ensures a consistent, robust attachment every time. The one-piece surge arrestor/connector delivers premium lightning protection in a single component that is completely soldered to seal in performance and seal out the elements. SureFlex Arrestor Plus assemblies include bulkhead mounting and will fit into your base station cabinet or in building applications. Contact Andrew to have an assembly designed for your application.
Gas Tube Replacement Kit of 10

Static Sparkover Voltage 90 230 350 1000 Type Number GASTUBE-090 GASTUBE-230 GASTUBE-350 GASTUBE-1000
90 Degree Mounting/Grounding Bracket

Interface Type Type N 7-16 DIN Type Number 243951 243950
616
Weatherproofing
Connector/Splice Weatherproofing Kit

Includes butyl rubber tape and plastic tape to provide additional moisture protection on exposed and buried connectors and splices. It also prevents loosening of connectors at jumper cable interfaces caused by vibration. ................................................................Type 221213
Cable Size For Connector Interface 1-5/8" to 1/2" For Splices 3", 4" and 5" 1-5/8" and 2-1/4" 1-1/4" 7/8" 1/2"
Connections Per Kit Connector/Splice Weatherproofing Kit 2
1 2 6 8 12
U.K. 0800-250055 Australia 1800-803 219 New Zealand 0800-441-747 Revised 9/00 &12/00
617
Weatherproofing
Ordering Information Cold Shrink

Kit Coverage Cable Size to Cable Size Kits for Type N Connectors Min. Application Diameters* in (mm) Type Number
3M Cold Shrink Weatherproofing Kit

Fast, Effective Connector Weatherproofing in Three Minutes. Cold Shrink This weatherproofing product seals and protects connectors, splices and jumper-to-antenna interfaces from the environment. No Tools Required Cold Shrink slips over the connection and compresses around the interface. Tapes or heat guns are not required for sealing or shrinking. Simply place the Cold Shrink kit over the cable, make the cable connection, and unwind the pull-tab applicator. Once it is collapsed, its continuous compression design forms a water tight seal around the cable. Fits up to 2-1/4" HELIAX Cable The kits are available for transitions from larger to smaller diameter cable, such as 1-5/8" to 1/2", or for same diameter cable, such as 1/2" to 1/2". See the table for Type Numbers. Available for Antenna-Jumper Interface The kits are also ideal for weatherproofing the antenna-tojumper interface, which is typically quite difficult to reach. Cold Shrink eliminates the needs for shrink tubes or weatherproofing tapes.
3M and Cold Shrink are trademarks of Minnesota Mining and Manufacturing Company.
1-5/8"-7/8" 1/2"-1/2" 7/8"-7/8" 1-1/4"-1-1/4" 1-5/8"-1-5/8"
1.20-0.84 (30-12) 0.48 (12) 0.84 (21) 1.20 (30) 1.20 (30)
241475-3 241474-4 241474-5 241474-6 241474-6
Kits for Type N and 7-16 DIN Connectors 5/8"-3/8" 5/8"-1/2" 5/8"-5/8" 7/8"-1/4" 7/8"-3/8" 7/8"-1/2" 1-1/4"-1/4" 1-1/4"-3/8" 1-1/4"-1/2" 1-5/8"-1/4" 1-5/8"-3/8" 1-5/8"-1/2" 2-1/4"-3/8" 2-1/4"-1/2" Kits for Antenna Interfaces** 1/4"-1-1/2" Omni/Panel base or Type N or DIN 3/8"-1-1/2" Omni/Panel base or Type N or DIN 1/2"-1-1/2" Omni/Panel base or Type N or DIN 1/4"-2" Omni/Panel base or Type N or DIN 3/8"-2" Omni/Panel base or Type N or DIN 1/2"-2" Omni/Panel base or Type N or DIN 1/2" LDF4 - Type N interface 5/8"-Type N or DIN interface 7/8"-Type N or DIN interface 0.29 (7.4) - *** 0.41 (10) - *** 0.41 (10) - *** 0.29 (7.4) - *** 0.41 (10) - *** 0.41 (10) - *** 0.49 (12) - *** 0.80 (20) - *** 0.49 (12) - *** 241548-10 241548-8 241548-8 241548-11 241548-9 241548-9 241548-4 241474-7 241548-5 0.80-0.41 (20-10) 0.80-0.63 (20-16) 0.80-0.80 (20-20) 0.84-0.29 (21-7.4) 0.84-0.41 (21-10) 0.84 0.63 (21-16) 1.20-0.29 (30-7.4) 1.20-0.41 (30-10) 1.20-0.63 (30-16) 1.20-0.29 (30-7.4) 1.20-0.41 (30-10) 1.20-0.63 (30-16) 1.40-0.41 (36-10) 1.40-0.63 (36-16) 241475-13 241475-13 241474-7 241475-12 241475-9 241475-9 241475-11 241475-5A 241475-5A 241475-11 241475-5A 241475-5A 241475-8 241475-8
Kits for Arrestor Plus Surge Protectors 7/8" LDF5 APTL5 1-1/4" LDF6 APTL6 1-5/8" LDF7 APTL7 0.84 1.20 1.20 241474-5 241474-6 241474-6
* Minimum application diameter is the fully compressed diameter of each tube in the kit. ** Andrew Cold Shrink weatherproofing is completely compatible with Andrew base station antennas. Request bulletin 10138 for complete details.
618
Revised 9/00
Cable Entry Systems
Multiple Entrance Wall/Roof Feed Thru Plates

Number of Openings Height in (mm) Width in (mm) Opening Distance Center to Center in (mm) Type No.
4" (102 mm) Entry Opening, Multiple Entrance Plate D E 1 1 4 8 12 16 7 (178) 5 (127) 9.5 (241) 17.5 (444) 25.5 (648) 25.5 (648) 7 (178) 5 (127) 25.5 (648) 25.5 (648) 25.5 (648) 25.5 (648) 5.5 (139) 5.5 (139) 5.5 (139) 5.5 (139) 204673-1 204673-2 204673-4 204673-8 204673-12 204673-16
A Single Entrance Wall/Roof Feed Thru Assembly. Includes rubber boot, clamp and galvanized steel plate. Order from table. B Multiple Entrance Wall/Roof Feed Thru Plate.Plate with one or more 4 or 5-inch entry holes. Use with the corresponding size rubber cable boots (sold separately). C Cable Entry Boot. Use with above feed thru plate, with the corresponding size entry hole.
5" (127 mm) Entry Opening, Multiple Entrance Plate 1 2 3 4 6 9.5 (241) 9.5 (241) 9.5 (241) 17.5 (444) 17.5 (444) 9.5 (241) 17.5 (444) 25.5 (648) 17.5 (444) 25.5 (648) 7 (178) 7 (178) 7 (178) 7 (178) 48940-1 48940-2 48940-3 48940-4 48940-6
One-Piece Cable Entry Boots

Cable Size Number of Holes in Boots Cable Boot Type No.
NEW!
D SNAP-IN Entry Port. Patent Pending. Snaps into a cabinet or metal plate, 0.06 to 0.14 in (1.5 to 3.5 mm) thick, with a 3.5 in (89 mm) diameter hole. If your cabinet or metal plate has a 4 in (100 mm) hole, use adapter plate below. Constructed from a weather-resistant engineering plastic. Use with One-Piece cable entry boot (Item C) for a durable, low cost alternative to fabricated metal entry ports. SNAP-IN Entry Port ............................ Type SEP-4 SNAP-IN Entry Port, kit of 10 .............Type SEP-4-10 Blank Cap, 4 in (100 mm)................... Type CAP-4 Blank Cap, 4 in (100 mm), kit of 10.... Type CAP-4-10 E Adapter Plate. Mounts SNAP-IN entry port (Item D) to an existing 4 in (100 mm) opening in a cabinet or metal plate, 0.06 to 0.14 in (1.5 to 3.5 mm) thick. ..............................................................Type SEPA-4 Wall/Roof Feed Thru Assembies, Single Entrance
Cable Size 1/2" 5/8" 7/8" 1-1/4" 1-5/8" 2-1/4" 3" 4" 5" Type Number 40656A-3 40656A-7 40656A-1 40656A-5 40656A-2 40656A-6 40394-2 40394-1 33938-5
4" (102 mm) Cable Boots 1/4" Foam 3/8" Foam 1/2" Foam 1/2" Foam 1/2" Foam 1/2" Air 1/2" Air 5/8" 5/8" 7/8" 7/8" 7/8" 1-1/4" 1-5/8" 2-1/4" 3" 5" (127 mm) Cable Boots 3/8" Foam 1/2" Foam 1/2" Foam 1/2" Foam 1/2" Air 1/2" Air 5/8" 5/8" 7/8" 7/8" 1-1/4" 1-5/8" 2-1/4" 3" 3 1 3 4 1 3 1 3 1 3 1 1 1 1 48939A-16 48939A-6 48939A-8 48939A-17 48939A-7 48939A-5 48939A-14 48939A-15 48939A-1 48939A-2 48939A-3 48939A-4 48939A-9 48939A-10 3 1 1 3 4 1 3 1 3 1 2 3 1 1 1 1 204679A-17 204679A-19 204679A-5 204679A-7 204679A-16 204679A-6 204679A-1 204679A-13 204679A-14 204679A-2 204679A-18 204679A-15 204679A-3 204679A-4 204679A-8 204679A-9
619
Cable Entry Systems
Cable Prep Tools
ArrestorPort II
The ArrestorPort II is the latest design offering the greatest cost savings and installation ease for wireless systems using surge arrestors.
ArrestorPort II Integrated Transmission Line Entry/Ground System

The ArrestorPort II integrated building entry/ground system redefines the way you achieve cable shelter entry and grounding. Traditional installations rely on a piecemeal approach that steals time and increases costs. ArrestorPort II unifies the installation of entry ports, Arrestor Plus surge protectors, and transmission line grounding into an integrated entry/ground system. Arrestor Plus cuts costs, saves valuable interior space and protects your revenues and personnel from the damaging effects of lightning strikes. ArrestorPort II Kit Wall entry and grounding system in one. Kit consists of an entry panel and a 1/8" solid copper ground bar assembly with assembly hardware, weatherstripping and weatherproof sealing caps for all entry ports. Use with Arrestor Plus surge arrestors (page 614, order separately) and standard cable boots (page 619, order separately). Type APORT-13-4 Provides mounting positions for 13 bulkhead mount surge arrestors and includes four 4 in holes for waveguide entry. Type APORT-26N-4 Provides mounting positions for 26 N bulkhead mount surge arrestors and includes four 4 in holes for waveguide entry.
EASIAX Cable Prep Tool

EASIAX precision cutting tool is the only cutting tool made exclusively for HELIAX coaxial cable. Its Accurate Cuts precisely at crest of copper corrugation at the exact distance required for easy connector attachment. Clean cut makes flaring easier than ever. Precise blade depth makes it impossible to cut inner conductor. Its Consistent Every cut by every technician on every interface of any cable will be exactly the same. Its one more way to ensure consistent electrical performance for your cable system. See ordering information on page 621.
620
Cable Prep Tools

EASIAX Plus Automated Cable Prep Tool
Now cable installers and system designers can dramatically reduce cable preparation time and expense while improving overall system performance with the EASIAX Plus Automated Cable Preparation Tool. Fit the EASIAX Plus Tool to any standard power drill and it removes the cable jacket, outer conductor, and foam, then cuts back and chamfers the inner conductor to the correct dimensions for connector attachment all in less than 15 seconds. The EASIAX Plus automated method of cable preparation provides cable connections that are more consistent, more reliable, and more repeatable.
EASIAX Plus Automated Cable Preparation Tool Ordering Information

Cable Type LDF1-50 EFX2-50 LDF2-50 FSJ4-50B LDF4-50 A LDF4.5-50 LDF5-50A LDF6-50 LDF7-50A Connector Type Standard Standard N and DIN Standard N and DIN FSJ4 Version 2 RingFlare RingFlare Standard, RingFlare, OnePiece Standard Standard, RingFlare, OnePiece Tool Type Number CPTL1 CPT-E2L2N, CPT-E2L2DIN CPT-E2L2N, CPT-E2L2DIN CPT-F4* CPT-L4ARC1 CPT-L45ARC CPTL5A CPTL6 CPTL7 Replacement Blades Type No. CPT-BKS CPT-BKS CPT-BKS CPT-BK CPT-BKS CPT-BKS CPT-BK5 CPT-BK6 CPT-BK7
* For discontinued tool CPT-F4A use CPT-BKS1 blade kit For discontinued tool CPT-F4B use CPT-BKSF4 blade kit
Manual EASIAX Cable Preparation Tool Ordering Information

Cable Type FSJ4-50B LDF4-50A LDF5-50A VXL5-50 Connector Type FSJ4 version 2 and standard connectors RingFlare connectors, and standard connectors Standard, RingFlare, and OnePiece Standard, RingFlare, and OnePiece Tool Type Number 207865 & 241372 MCPT-L4 MCPT-78 MCPT-78 Replacement Blades Kit of 5, Type No. 209874 MCPT-BK5 MCPT-BK5 MCPT-BK5
For standard connectors, additional tools are required.
621
Connector Attachment Tool Kits

The connector interface is one of the most critical factors affecting transmission line operation. Even experienced technicians can make mistakes when equipped with makeshift devices or an inadequate array of simple hand tools, and it only takes a single faulty connection to degrade performance and threaten your operations revenues. With the HELIAX connector attachment tool kit, workmanship is no longer compromised by tools never meant for the job. The kit contains the same specialized tools used by our factory technicians that make connector attachment faster and easier and produces a reliable assembly that matches the quality of the HELIAX cable system serving the operation. Tool can be ordered individually by type number or in kits. Kit type numbers are listed in the top row and include the tools indicated with an X.
Type Numbers for Individual Tools Description Kit Type Numbers: 224351 224352 224353 224354 224355 224356 224390 224391 224392 224393 224394 MCPT-78 MCPT-L4 207865 224358 224360 224361 224362 244494 224363 224368 224373 224377 224380 224395 114468 114469 241953 243398 Tool Box Safety Knife Wire Snips Inch/Millimeter Rule Greasing Brush Point File Leather Buffing Strap Emery Cloth - 1 ft (30 cm) Flare Hammer Flat Hammer Beveled Hammer Tip 7/8" EASIAX Tool 1/2" EASIAX Tool Tapered Drill Punch 3/4" Pin Alignment Tool Cutoff Guide 7/32" (5.5mm) LDF4/FSJ4 Cutoff Guide 8/32" (6.3mm) Cutoff Guide 9/32" (7.1mm) Cable Flare Tool LDF4 Cable Flare Tool LDF5 Cable Flare Tool LDF6 Soldering Pliers Pin Depth Gauge N-Male Pin Depth Gauge N-Female Pin Depth Gauge DIN Male Pin Depth Gauge Female Chamfer Tool FSJ4 Chamfer Tool FSJ2 (not included in tool box)
Complete Tool Box x x x x x x x x x x x x x x x x x x x x x x x x x x x
Basic Tool Box x x x x x
DIN
FSJ1/FSJ4/ LDF4 Kit
LDF5 Kit
Air Cable and LDF6 Kit Waveguide Kit TB-AW-KIT
TB-COMP-KIT TB-BASIC-KIT TB-DIN-KIT TB-N-KIT
TB-F14L4-KIT TB-L5-KIT TB-L6-KIT
x x x x x x x x x x
FSJ1/FSJ4 EASIAX Cable Tool x
x x x x x x x x x
622
Revised 5/01
Attachment Tools
Wrenches
Crimping Tool
Grounding Kit Preparation Tool
Connector Attachment Torque Wrenches

Andrew torque wrenches attach any type HELIAX connectors to HELIAX LDF4.5, LDF5, LDF6, LDF7, and LDF12 coaxial cables. All are designed with a mechanism to audibly notify the installer that the proper torque has been reached and release the pressure.
Type Number 244373 244374 244375 244376 244377 244378 244379
Crimping Tool for Crimp-On Grounding Kits

Crimping Tool. Used to attach crimp-on lugs for standard and SureGround series grounding kits described on pages 610-612. Not required for kits having factory-attached lugs .......................Type 207270
Description 2-5/8" torque wrench 2-1/4" torque wrench 1-7/8" torque wrench 21mm torque wrench 1-1/4" torque wrench 1-1/4" torque wrench 13/16" torque wrench
Application LDF12 connectors LDF7 connectors LDF6 connectors LDF4.5 connectors Coupling torque DIN connectors LDF5 connectors Coupling torque N connectors
Grounding Kit Preparation Tool

This tool removes the exact amount of jacketing necessary to attach a grounding strap in one simple, precise step, without the use of knives. The tool takes just seconds to use. Simply snap it in place around the cable and rotate. The tool is ideal for use on cables mounted close to structures and other cable runs. It will not scrape or damage the cables outer conductor. Grounding Kit Preparation Tool Ordering Information
Cable Type FSJ4-50B LDF4-50A LDF4.5-50 LDF5-50A LDF5-50A VXL5-50 LDF6-50 VXL6-50 LDF7-50A VXL7-50 Tool Type No. GKT-F4 GKT-L4 GKT-58 GKT-78 GKT-78 GKT-78 GKT-114 GKT-114 GKT-158 GKT-158 Replacement Blade Kit Type No. GKT-BKU GKT-BKU GKT-BKU GKT-BKU GKT-BKU GKT-BKU GKT-BKU GKT-BKU GKT-BKU
Wrench Kit
Kit includes the three wrenches listed below. ..................................................................Type 244372 Type 244459-7, wrench for LDF7 (1-5/8") connectors Type 244459-6, wrench for LDF6 (1-1/4") connectors Type 244459-5, wrench for LDF5 (7/8") connectors
623
A Connector PIN-PAKS. Replacement connector center pins individually packaged in sets (quantities shown below). Each pin can be easily separated from the set. PIN-PAKS for 7/8" cable and smaller include five replacement pins: PIN-PAKS for 1-1/4" and 1-5/8" cable include two replacement pins.
For Connector Type F1PNM-H C41SW F2NM, F2NM-H F2PNM, F2PNM-H F2PDM F4NM, F4NM-H F4NMV2 F4PNM, F4PNM-H F4PNMV2 F4NF F4PNF F4PDM F4PDMV2 L2NM, L2NM-H L2PNM, L2PNM-H L4NM, L4NM-H L4PNM, L4PNM-H L4PDM L4NF L4PNF L5NM L5PNM, L5PNM-H L5NF L5PNF L5PDM L5PDF, L5PDF-BH L6PNM, L6PNM-H L6PNF L6PDF, L6PDF-BH L6PDM L7PNF L7PNM L7PDM V5PNF V5PNM V5PDF V5PDM PIN-PAK Type No. 242881 241051-3 242075-3 242075-4 114402-2 241455-3 243640-2 241455-4 243472-2 241496-3 241496-4 114417-2 243465-2 48335-3 48335-4 241730-3 241730-4 222483-2 242855 242855-2 43158-5 241495 43157-2 241092 114105 114105-2 243370 241057 114105-4 114105-3 241056 243371 242960 244985-2 244983-2 244989-2 244987-3 Quantity Per Kit 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 2 2 2 2 2 2 1 5 5 5 5
B Bulkhead Adapter. For use with type N or UHF jacks for 1/4", 3/8", 1/2" or 7/8" HELIAX cable. Includes faceplate and mounting hardware .........Type 26016-2 Connector Reattachment Kit includes rubber O-ring and gasket parts to replace those which may be damaged during disassembly and subsequent reattachment of connectors. Does not include interface O-rings or gaskets.
Cable Types LDF2-50 LDF4-50A FSJ4-50B LDF5-50A LDF6-50 LDF7-50A HJ4-50,HT4-50 HJ5-50 For Connector Types Reattachment Kit Type No. 34767A-38 34767A-27 34767A-51 34767A-39 34767A-66 34767A-28 34767A-43 34767A-35 34767A-22 34767A-3 34767A-5 34767A-44 34767A-18 34767A-6 34767A-7 34767A-20 34767A-19 34767A-13 34767A-46 34767A-50 34767A-49 34767A-47 34767A-60 34767A-10 34767A-30 34767A-57 34767A-58 34767A-59 34767A-15 34767A-16 34767A-40 34767A-41 34767A-17 34767A-55 34767A-56 34767A-45 34767A-31
Foam-Dielectric Cables L2 and L42 Series L44 Series, except L4NM, L44PCW, L44PCN, L4NM, L44PCW, L44PCN F4 and 44AS Series F4V2 Series L5 and L45 Series L6 and L46 Series L7 and L47 Series H4PNM, H4PNF, 74PN, 74PW H5PNF, H5PNM, 75PN, 75AR, 75PW 75AG, 75AU 75ART, 75AGT H5NF-T, 75NT 87G, 87R H7PNF, 87PN, 87S, 87SG 87SGT, 87ST H7NF-T, H7NM-T, 87NT, 87WT 87Z H12PNF, 82PN 82GF 82RF 82R H8( )-302 78AGF, 78ARM, 78ARF, 78AGM, 78AS 78BZ H11( )-602 H11( )-M408 H11( )-302 81RF 81GF 42826 42896 81Z H9( )-602, H9HP( )-602 H9( )-M408, H9HP( )-M408 79AG, 79AR 79AZ, H9HPZ
Air-Dielectric Cables
HJ7-50A
HJ12-50
HJ8-50B
HJ11-50
Contact Andrew for other replacement pins.
HJ9-50, HJ9HP-50
624
Connector Adapters
Description A L M B C D E F G N O H I J K L P M Q N O P Q N Junction, female-female, UG-29B/U N Junction, male-male, UG-57B N Right Angle, male-female, UG-27D/U N Tee, female-female-female, UG-28A/U UHF Junction, female-female, PL-258 UHF Right Angle, male-female, M-359A UHF Tee, female-male-female, M-358 N female-UHF male N male-UHF female Flange Adapter, F flange, male-7/8" EIA, 50 ohm F Flange, female-N female F Flange Elbow, F Flange, male-F Flange, female 7-16 DIN male-N female 7-16 DIN male-N male 7-16 DIN female-N female 7-16 DIN female-N male 90 Miter Elbow, 7/8" EIA, 50 ohm 90 Miter Elbow, 1-5/8" EIA, 50 ohm 90 Miter Elbow, 3-1/8" EIA, 50 ohm N female-7/8" EIA, 50 ohm N female-1-5/8" EIA, 50 ohm N female-3-1/8" EIA, 50 ohm LC female-7/8" EIA, 50 ohm LC female-1-5/8" EIA, 50 ohm N Male-TNC Male N Female-TNC Male N Male-N Male, hex head Type No. 10804-11 10804-9 10804-66 10804-17 10805-6 10805-5 10804-4 10805-12 10805-11 33682 104300-2 203361 CA-PNFDM CA-PNMDM CA-PNFDF CA-PNMDF 1060A ACX150-10SE ACX350-10SE 2260B 2261A 2262 2360A 2361A CA-NMTM CA-NFTM CA-NMNM-H
R R S S T U T U V V
625
Fire Retardant Cables and Waveguides

Fire Retardance Requirements Cable and waveguide installed inside a building usually must meet fire retardance requirements. In the United States, the National Electrical Code (NEC)1 sets the standard for coaxial cable used within buildings and normally has the force of law, as most local electrical codes in the U.S. are based on it. In addition, most building codes cover cable, and other local requirements may exist such as the Fire Gas Toxicity Standards of New York State. Somewhat similar requirements are provided by the Canadian Electrical Code (CEC), issued by the Canadian Standards Association (CSA). Other countries requirements often reference the International Electrotechnical Commission (IEC) standards. Definitions Some terms used in building construction are referred to in fire-retardant cable regulations. They are defined below: Conduit. A tube or duct for enclosing electrical wires and cable. Conduit may be metallic or nonmetallic. Duct. A closed channel, tube, or pipe used to transport air, dust, vapors, etc. Plenum. A compartment or chamber to which one or more air ducts are connected and forms part of the air distribution system of a building. Raceway. An enclosed channel designed expressly for holding wires, cables, or bus bars, with additional functions as permitted in the National Electrical Code. Raceway may be metallic or nonmetallic. Riser. A vertical shaft passing from floor to floor. Risers may or may not be fireproof or have firestops at each floor. Coaxial Cable Applications Defined by the NEC In the National Electrical Code, coaxial cable falls under the Community Antenna Television Systems (CATV) category. The NEC provides requirements for coaxial cable installed within buildings in Article 820. These requirements cover all installations except where the cable enters the building from the outside, does not pass through a plenum or riser, and is (a) of any length, but runs throughout in a properly grounded metal conduit (rigid or intermediate) or (b) no longer than 50 feet (15.2 m), within the building, and terminated at a grounding block. The requirements state that these cables shall be listed as being resistant to the spread of fire as specified in the code, listed as being suitable for the purpose, and properly marked. Four categories of listed coaxial cable are defined (in descending order of fire-resistance rating): Type CATVP, plenum cable; Type CATVR, riser cable; Type CATV, general purpose coaxial cable; and Type CATVX, limited use coaxial cable.
1. National Electrical Code and NEC are registered trademarks of the National Fire Protection Association.
Riser and Plenum Applications in Multi-Story Building
Elevator Shaft
Cable penetrating floor of building (Riser)
Cable in Elevator Shaft (Riser)
Floor penetration
Cable in False Ceiling (Plenum)
False Ceiling
626

Wiring In Ducts, Plenums and Other Air-Handling Spaces Only Type CATVP listed cables, which have extremely high fire resistance coupled with low smoke emission, are permitted by the NEC to be installed in ducts, plenums or other spaces used for environmental air (such as above a false ceiling) without additional protection. All other cables, which must be listed as Type CATVX or higher, must be contained within rigid metal conduit, flexible metallic tubing or similar barrier, depending on the application. (These conditions preclude use of RADIAX cables, so these cables must be CATVP listed to be installed in a plenum or duct). Wiring In Vertical Runs Type CATVR listed cables are required for installation in risers or any other floor penetration connecting more than one floor. Type CATVP cables, which have even higher fire resistance, can be substituted for Type CATVR cables. CATV or CATVX listed cables can also be installed in risers provided that they are encased in noncombustible tubing (not applicable to RADIAX cables) or are located in a fireproof shaft having firestops at each floor. General Purpose Wiring Within Buildings All coaxial cables to be installed within buildings in locations other than plenums and risers, as defined above, must be at least Type CATV listed for fire resistance unless one of the following exceptions applies: Type CATVX cable enclosed in raceway. Type CATVX cable in nonconcealed spaces where the exposed length does not exceed 10 ft (3.05 m). Small diameter Type CATVX cables installed in dwellings. Type CATVR and Type CATVP cables, which have passed more stringent tests, are permitted to be substituted for Type CATV cables. Acceptable cables are summarized on the chart on page 629. Model Building Code Requirements for Coaxial Cable Some model building and mechanical codes also include fire retardance requirements for coaxial cable. Generally, they stipulate that exposed cables in concealed spaces over suspended ceilings, and other spaces used for environmental air handling purposes as defined in the particular code, be listed and labeled as plenum cable per NEC requirements.
Fire Gas Toxicity Fire Retardant Jacketing Characteristics. Some coaxial cables use halogenated polymeric jacketing to provide fire retardance. (Halogens are chemically related elements such as fluorine, chlorine, and bromine.) The drawback to such materials is increased levels of smoke and toxic gases under fire. All HELIAX Coaxial Cables rated Type CATVR achieve fire retardance by using non-halogenated jacketing. While such a jacketing has low toxicity characteristics when burned, it is somewhat less effective at high temperatures than halogenated jacketing. Presently, it is not possible to achieve the highest fire retardance rating, CATVP, without either employing halogenated jacketing or omitting the jacket entirely; consequently, Type CATVP listed HELIAX cables presently use halogenated fire retardant jacketing. New York State Requirements. The New York State Department of State (DOS) Office of Fire Prevention and Control publishes a Fire Gas Toxicity Data File for products covered by Article 15, Part 1120 of the New York State Uniform Fire Prevention and Building Code. Only products listed in this directory are permitted to be used in the construction of some buildings in New York State. All of Andrew Corporations cable and waveguide products are listed in the Fire Gas Toxicity Data File, as follows:
New York State DOS File Number 16120-880602-2007 Listed Manufacturer Andrew Listed Cables All Codes All Codes All Codes All Codes
Market Name RADIAX Slotted Coaxial Cable Foam Dielectric HELIAX Coaxial Cable Foam Dielectric HELIAX Coaxial Cable Air Dielectric HELIAX Elliptical Waveguides
16120-880602-2008
Andrew
16120-871217-1058
Andrew
16120-880602-2006
Andrew
627

Caution: Since local requirements may vary, check with your local building inspector to make certain that a proposed installation conforms with all applicable electrical codes, building codes, mechanical codes and fire protection codes. Andrew Fire Retardant Cables - Indoors or Outdoors Andrew offers a full line of fire retardant products for HELIAX coaxial cable, RADIAX radiating coaxial cable and HELIAX elliptical waveguide. A listing of these products appears on page 629. Fire retardant cables are suitable for indoor/outdoor use. Outdoor service life is 10 years, minimum, for HELIAX cables with CATVR (RN) rated jacketing. CATVP (RP) rated cables have an even longer outdoor service life. Refer to the table on page 629 for HELIAX and RADIAX fire retardant cable temperature ratings. Acceptable Cables and Waveguides by Application - United States
Application Within Building Ducts, Plenums and Other Environmental Air Spaces, Exposed Ducts, Plenums and Other Environmental Air Spaces, in Metal Tubing or Conduit Vertical Runs penetrating more than 1 floor, or in a shaft, exposed Vertical Runs penetrating more than 1 floor, or in a shaft, encased in Metal Raceway or in a Fireproof Shaft having Firestops at each floor All other locations except those given above, exposed for more than 10 ft (3.05m) All other locations except those given above, exposed for 10 ft (3.05m) or less, nonconcealed All other locations except those given above, enclosed in Raceway All other locations except those given above, cable enters from outside, in Grounded Metal Conduit All other locations except those given above, cable enters from outside, less than 50 ft (15.2m) within building, grounded. Type CATVP Type CATVR Type CATV Type CATVX Unlisted NEC 1999 Section 820-53(a) 820-53(a), Exception 820-53(b), (Non-residental) 820-53 (b), Exception No. 1 820-53 (c), (Non-residental) 820-53 (c), Exception No. 2 820-53 (c), Exception No. 1 820-50, Exception No. 2 820-50, Exception No. 3
628
Andrew Fire Retardant Coaxial Cables and Elliptical Waveguides

Product RADIAX Cable 1/4" 3/8" 1/2" - 3 1/2" - 2 1/2" - 1 7/8" 1-1/4" 1-5/8" HELIAX Cable Superflexible 1/4", 50 1/4", 75 3/8", 50 1/2", 50 1/2", 75 Extraflexible 3/8", 50 Foam Dielectric 1/4", 50 3/8", 50 1/2", 50 1/2", 75 5/8", 50 7/8", 50 7/8", 50 1-1/4", 50 1-1/4", 50 1-5/8", 50 1-5/8", 50 2-1/4", 50 Air Dielectric 1/4", 50 1/4", 50 3/8", 50 3/8", 50 1/2", 50 1/2", 50 1/2", 50 1/2", 50 5/8", 50 7/8", 50 7/8", 75 1-5/8", 50 2-1/4", 50 Type EWP52 Type EWP63 Type EW63 Type EWP77 Type EW85 Type EWP90 Type EW127A Type EW132 Type EWP180 HS1RP-50A HST1-50 HS2RP-50 HST2-50 HS4RP-50 HL4RP-50 HST4-50 HLT4-50T HJ5RP-50 HJ7RP-50A 527 529 531 533 546 540 549 543 555 560 HJ4RN-50 HJ4.5RN-50 HJ5RN-50 HJ5RN-75 HJ7RN-50A HJ12RN-50 35409-20 35409-18 35409-19 35409-22 35409-17 35409-16 35409-15 35409-14 35409-21 535 552 555 582 560 563 172 174 174 178 180 182 184 186 188 LDF1RN-50 LDF2RN-50 LDF4RN-50A LDF4RN-75A LDF4.5RN-50 LDF5RN-50A VXL5RN-50 LDF6RN-50 VXL6RN-50 LDF7RN-50A VXL7RN-50 LDF12RN-50 491 493 496 578 500 506 503 513 510 520 517 524 LDF1RN-50 LDF2RN-50 LDF4RN-50A LDF4RN-75A LDF4.5RN-50 LDF5RN-50A VXL5RN-50 LDF6RN-50 VXL6RN-50 LDF7RN-50A VXL7RN-50 LDF12RN-50 491 493 496 578 500 506 503 513 510 520 517 524 LDF1RN-50 LDF2RN-50 LDF4RN-50A LDF4RN-75A LDF4.5RN-50 LDF5RN-50A VXL5RN-50 LDF6RN-50 VXL6RN-50 LDF7RN-50A VXL7RN-50 LDF12RN-50 491 493 496 578 500 506 503 513 510 520 517 524 EFX2RN-50 489 EFX2RN-50 489 EFX2RN-50 489 ETS1-50T ETS2-50T 477 483 FSJ1RN-50B FSJ1RN-75A FSJ2RN-50 FSJ4RN-50B FSJ4RN-75A 474 574 480 485 576 FSJ1RN-50B FSJ1RN-75A FSJ2RN-50 FSJ4RN-50B FSJ4RN-75A 474 574 480 485 576 FSJ1RN-50B FSJ1RN-75A FSJ2RN-50 FSJ4RN-50B FSJ4RN-75A 474 574 480 485 576 RXP4-2 RXP4-1 665 665 RXL1-1RNT RXL2-2RNT RXL4-3RNT RXL4-2RNT RXL4-1RNT RXL5-1RNT RXL6-1RNT RXL7-1RNT 663 663 664 663 663 664 664 664 RXL5-1RNT1 RXL6-1RNT1 RXL7-1RNT1 664 664 664 Type CATVP (UL 910) Type No. Refer to Page Type CATV (UL 1581, Type CATVR (UL1666) Flame Test 1160) Type No. Refer to Page Type No. Refer to Page Type CATVX Type No. Refer to Page
HELIAX Elliptical Waveguide***
** High temperature foam dielectric. *** Type CATVP elliptical waveguides are available on request. All cables meet standards BS4066 Part 1 and IEC332 Part 1. Type CATVP, CATVR and CATV cables meet BS4066 Part 3 and IEC332 Part 3, Catagory C. All type CATVP air-dielectric cables are also listed by the Canadian Standards Association (CSA) as Communications Cable, Type CXC-FT4, FT6. They carry dual UL/CSA markings. All type CATVR, CATV, and CATVX RADIAX, superflexible, and foam-dielectric cables listed comply with equivalent Canadian Standards Association (CSA) requirements and are CSA marked.
Temperature Ratings for HELIAX Fire Retardant Coaxial Cables

Installation Types CATVR, CATVX, and CATV Jacketed Cable, Foam and Air Type CATVP Jacketed Cable, Foam and Air Polyethylene Dielectric PTFE Dielectric Recommended Temperature Range C (F) Storage Operation -30 to 80 (-22 to 176) -40 to 85 (-40 to 185) -40 to 150 (-40 to 302) -30 to 80 (-22 to 176) -40 to 85 (-40 to 185) -40 to 150 (-40 to 302)
-25 to 60 (-13 to 140) -40 to 60 (-40 to 140) -40 to 60 (-40 to 140)
629
Intermodulation Generation
Figure 1 Bulk Length of LDF4-50A
-60 -70 -60 -70
Figure 2 15 ft Assembly of FSJ4-50B
3rd Order IM Response, dBm Reference Value = 120 dBm
-80 -90 -100 -110 -120 -130 -140 -150 1870
3rd Order IM Response, dBm Reference Value = 120 dBm

1875 1880 1885 1890 1895 1900 1905 1910
-80 -90 -100 -110 -120 -130 -140 -150 1870
1875
1880
1885
1890
1895
1900
1905
1910
3rd Order IM Frequency, MHz Test Power +43 dBm for Each Tone
3rd Order IM Frequency, MHz Test Power +43 dBm for Each Tone
Intermodulation (IM), the intermixing of fundamental signal frequencies in a nonlinear circuit, has been a problem in multichannel communication systems for years. IM produces additional spurious signals at frequencies close to the operating frequencies, which can create additional noise in the system or even swamp the channel and make it unavailable for traffic. The many channels in modern wireless communications systems are typically arranged into base station transmit and receive frequency bands. Depending on the particular generating signal frequencies, IM products can fall into these receive frequencies. It therefore becomes desirable to keep the IM level low enough to prevent additional noise at the receivers. Any deviation from linearity in a circuit will cause some IM. Nonlinearity is present when the voltage is not exactly proportional to the current or if output power is not exactly proportional to input power. Imperfect contacts at conductor junctions and the presence of ferromagnetic materials in or near the current path are the two main causes of nonlinearity in passive circuits. Measured passive IM levels are not very dependent on frequency, but do depend on the signal amplitude. Thus, when measuring or specifying IM performance of a component, the power levels of the carriers must be specified. Typically, testing is performed using two tones fairly closely spaced in frequency, the power level of each being 20 W (+43 dBm).
Low IM vs. Inferior Designs dBm Large number of components Low pressure contact, outer Low pressure contact, inner Nickel plating Low IM design -95 -96 -85 -83 -120 to -130
HELIAX cables, constructed from a single inner and single outer conductor deliver the best IM performance. Because current flow in coaxial cables is longitudinal, designs with many individual conductors require the current to cross numerous boundaries, each boundary being capable of producing IM products. It is not possible to apply high pressure between the individual conductors of a braided or foil-braid cable, for example, to improve IM performance. IM levels for braided cables are typically -80dBm or worse at a test power level of +43 dBm. By contrast, Figure 1 and Figure 2 show the excellent IM performance of HELIAX cables. Figure 1 is the IM characteristic for a bulk length (approximately 5,000 feet) of LDF4-50A, swept in frequency through the PCS band, and Figure 2 is a similar plot for an assembly length (15 feet) of FSJ4-50B. Levels for both are -120 dBm or better at the test power level of +43 dBm for each tone. HELIAX connectors are also designed and manufactured for the lowest IM. Three factors are important in connector design to minimize IM generation. First, the number of individual contact surfaces must be a few as possible. Second, where contact surfaces are necessary, they must be designed for excellent contact by using means to generate high pressure or by using soldering. Third, base materials, platings, and underplatings at RF current-carrying surfaces must not be made of ferromagnetic materials. The table shows measured IM levels for various RF connectors fitted to short lengths of cable. Andrew connectors, designed and constructed using these principles for low IM generation outperform other manufacturers designs that deviate from these principles in one way or another.
630
Coaxial Transmission Line Technical Data

Figure 1 Variation of Attenuation with Ambient Temperature
1.15 1.10 Attenuation Correction Factor 1.05 1.00 .95 .90 .85 .80 -60 Added Loss Due to Load Mismatch, dB
Figure 2 Effect of Load VSWR on Transmission Loss

1.4 1.2 1.0 .8 Normal Line Attenuation = 6 dB .6 .4 .2 0 1.0 1 dB 0.5 dB 3 dB 2 dB
-40
-20
20
40
60
80
100
1.25
1.5
1.75
2.0
2.25
2.5
2.75
3.0
Ambient Temperature, C
VSWR at Termination
Attenuation The attenuation versus frequency characteristics of HELIAX coaxial cables are provided as part of the data for each cable in this catalog. The figures are guaranteed to within 5%. The values provided are for 20C (68F) ambient and increase slightly with higher temperature or applied power, up to approximately 15% above the curves at 100C (212F) ambient temperature. Figure 1 shows this relationship. Temperature Ratings for HELIAX Coaxial Cables
Effect of Connector on Transmission Line Loss Usually, connector insertion loss is negligible compared with the attenuation of the cable. Connector insertion loss depends on the frequency of operation. You can easily calculate the total transmission line insertion loss (the sum of cable attenuation and insertion loss of the connectors) using our AASP software available on our web site at www. andrew.com. To approximate insertion loss for two connectors, add 0.1 dB to the transmission line loss.
Storage
Installation
Operation
Standard Black Polyethylene Jacketed Cables Up to 2-1/4" Cables 3" and Larger Cables Connectors C F CATVX Rated Cables C F CATVR Rated Cables C F CATVP Rated Cables Polyethylene Dielectric High Temperature Dielectric C F C F -40 to 85 -40 to 185 -40 to 100 -40 to212 -40 to 60 -40 to 140 -40 to 60 -40 to 140 -40 to 85 -40 to 185 -40 to 150 -40 to 302 -30 to 80 -22 to 176 -25 to 60 -13 to 140 -30 to 80 -22 to 176 -30 to 80 -22 to 176 -25 to 60 -13 to 140 -30 to 80 -22 to 176 -70 to 100** -94 to 212** -40 to 60 -40 to 140 -55 to 150*** -67 to 302*** C F C F -70 to 85* -94 to 185* -70 to 85* -94 to 185* -40 to 60 -40 to 140 -40 to 60 -40 to 140 -55 to 85 -67 to 185 -40 to 85 -40 to 185
* Cable with connectors attached rated to -40C (-40F). ** Upper temperature limited by connector package material. Storage defined as packaged connectors, not connectors installed on cable. *** If connectors are operated above 100C (212F) and then separated, interface seals (gaskets or O-rings) should be replaced before remating. Air cable and connectors will operate below -40C (-40F), but may experience air pressure loss exceeding 1lb/in2 (7kPa) in 24 hours. For CATVP air cables, 7/8" and larger, the installation temperature is -20 to 60C (-4 to 140F)
631
Coaxial Transmission Line Technical Data
Load VSWR Effect on Total Transmission Loss When the transmission line is attached to a load, such as an antenna, the VSWR of the load increases the total transmission loss of the system. This effect is quite small for normal conditions. Figure 2 on page 631, shows the minimum increase in loss with load VSWR, assuming a VSWR of 1.0 at the input of the transmission line. This requires use of an input matching device. Power Rating Considerations Both peak- and average-power ratings are required to fully describe the capabilities of a given transmission line. Typically, peak-power ratings limit usage with amplitude modulation at medium frequencies (530-1610 kHz) or pulsed usage, while average-power ratings limit the high frequency usage. Peak-Power Rating The peak-power rating of a transmission line is limited by voltage breakdown between the inner and outer conductors. Voltage breakdown is essentially independent of RF frequency, but varies with line pressure and type of pressurizing gas. Peak-power ratings are, therefore, generally stated for the following standard conditions: VSWR = 1.0, zero modulation and one atmosphere absolute dry air pressure (0 lb/in2 or 0 kPa gauge) at sea level. The peak-power rating of the selected cable must be derated for modulation technique and VSWR, as follows: Peak Power Derating for Modulation and VSWR
Modulation AM FM and DTV Analog TV Peak Power Derating Calculation PMAX = PMAX = PMAX = PPK (1+M)2 VSWR PPK VSWR PPK = (1+AU+2AU) VSWR PPK (2.09) VSWR
Rated transmitter power must be less than calculated derated peak power of the cable for safe operation. For digital TV (DTV), peak power is typically 7dB higher than average power. From derating expressions, it can be seen that 100% amplitude modulation increases the peak power in the transmission line by a factor of 4. Also, the peak power in the transmission line increases directly with VSWR. The transmission line peak-power rating can be significantly increased by pressurization. See page 633 for details. An adequate safety factor on peak power is necessary to safeguard against voltage breakdown which can result in permanent damage to the transmission line. All HELIAX semiflexible coaxial cables are high-voltage tested to the equivalent of 200% of their rated peak powers (safety factor of 1.4 on voltage), and all rigid coaxial lines to the equivalent of 400% of rated peak powers (safety factor of 2.0 on voltage). These safety factors are intended as a provision for transmitter transients, lightning induced transients, and high voltage excursions due to other unforeseen causes. Andrew is known for its conservative specifications that insure long term, reliable performance. We continue to hold this commitment to our customers by maintaining the highest level of quality and performance. HELIAX peak-power ratings are determined according to the relation: PPK =
(E x 0.707 x 0.7) SF
P
ZC Where: PPK EP 0.707 0.7 SF = = = = = Cable power rating, standard conditions dc production test voltage RMS factor dc to RF factor (empirically verified) Safety factor on voltage = 1.4 for HELIAX semiflexible cables = 2.0 for rigid coaxial lines = Characteristic impedance
Where: PMAX PPK M VSWR AU 2.09 = = = = = = Derated peak power Peak power rating of cable Amplitude modulation index (100% = 1.0) Voltage standing wave ratio Aural to visual ratio (20% Aural: AU = 0.2) Modulation derating factor for TV, for AU=0.2
ZC
632
Figure 3 Pressurization Factors

20 Peak Power SF (Sulfur Hexafluoirde) 6 or Freon 116 10 9 8 7 6 5 4 3 2
Figure 4 Variation of Average Power Rating with Ambient Temperature

2.5 Rated Inner Conductor Temperatures 2.0 100C (212F) LDF Foam Cables. H4, H5, H7, H9, H12 Air Cables 121C (250F) H8, H11 Air Cables 200C (392F) HT4, HT5 and HLT4-50T Air Cables 1.5 Normal Amb. Temp. for Rating Purposes 1.0
Pressurization Factor (P'/P)
P' = rating at increased pressure P = rating at atmospheric pressure
Peak Power Dry Air or Nitrogen
Ambient Temperature Factor (P'/P)
.5
P' = Rating at new Amb. Temp. P = Rating at Normal Amb. Temp. of 40C
10
15
2
20
25
30
0 -50
50
100
150
200
Pressure, lb/in Gauge*
Ambient Temperature, C
* For kPa, multiply by 6.895
Connector Power Ratings

Connector Type SMA BNC TNC UHF N HN SC 7-16 DIN 4.1/9.5 DIN LC 7/8" EIA 1-5/8" EIA 3-1/8" EIA 4-1/2" IEC 6-1/8" EIA
*
Typical dc production test voltages for various sizes of semiflexible coaxial cable and rigid line are shown below.
Impedance ohms 50 50 50 50 50 50 50 50 50, 75 75 75 Ep, kV Flexible cables 6 9 11 13 16 21 27.5 Ep, kV Rigid lines 11 19 36 41.8 47
DC Test Voltage kV 1.0 1.5 1.5 2.0 2.0 4.0 4.2 4.0 2.5 5.0 6.0 11 19 21 27.5
Average Power kW* 0.1 0.1 0.3 0.3 0.6 0.6 1.2 1.3 1.2 3.5 1.7 4.9 16 27 57
Peak Power kW 2.5 5.6 5.6 10 10 40 44 40 16 63 90 300 902 1100 1890
Nominal size 7/8" 1-1/4" 1-5/8" 2-1/4" 3" 3-1/8" 4" 5" 6-1/8" 7-3/16" 8-3/16"
Average power ratings of the connector interfaces are based on an operating frequency of 900 MHz. The values shown in this table are typical for most applications.
Foam-dielectric cables have a greater dielectric strength than air-dielectric cables of similar size. For this reason they might be expected to have higher peak-power ratings than air cables. Higher peak-power ratings usually can not be realized, however, because the commonly used connectors for foam cables have air spaces at the cable/connector interface which limit the allowable RF voltage to air cable values. Andrew rates similar size foam- and air-dielectric cables alike for this reason. Effect of Connector on Power Rating The peak power handling capability of a cable assembly is the smaller of the values for the cable and the connectors. The following table shows power ratings for common connectors at standard conditions of VSWR = 1.0, zero modulation and one atmosphere dry air pressure (0 lb/in2 or 0 kPa gauge) at sea level.
Increased Peak Power Ratings Pressurization and/or the use of high-density gases with high dielectric strength can be used to increase peakpower ratings. These effects are shown in Figure 3. For a given transmission line pressure, the increase in peak-power rating is significant. For example, a line pressure of 10 lb/in2 (70 kPa) dry air increases the peak-power rating by a factor of 1.9. Pressurization above 30 lb/in2 (207 kPa) is not recommended. Average Power Rating Average power ratings for semiflexible cables are determined by the maximum permissible inner conductor temperature. This maximum temperature depends on the type of dielectric, and is governed by considerations of the long-term life of the dielectric. Average power ratings for rigid coaxial lines are also determined by the maximum inner conductor temperature. For rigid lines this maximum temperature is set primarily by considerations of differential expansion of inner and outer conductors, and the maximum movement permissible at the joints (inner connectors).
633
Figure 5 Derating Factor for Average Power Due to VSWR

1.0 .9 Solar Radiation Factor (P'/P) .8 .7 .6 F1 .5 .4 .3 .2 .1 0 10 100 Frequency in Megahertz 1000
Figure 6 Variation of Average Power Rating with Intensity of Direct Solar Radiation
1.0 (200C) 0.9
7/8" 1-5/8" - 2-1/4" 3" and 3-1/8" 4" and 5" 6-1/8" -- 8-3/16"
(121C) 0.8 (100C) 0.7 Rated Inner Conductor Temperatures 100C (212F) LDF Foam Cables. H4, H5, H7, H9, H12 Air Cables 0.5 121C (250F) H8, H11 Air Cables 200C (392F) HT4, HT5, and HLT4-50T Air Cables 0.4 0 200 400 600 800 1000
0.6
Solar Radiation, W/m2
Andrew average power ratings are based on a VSWR of 1.0, atmosphere pressure and ambient temperature of 40C (104F). Derating Average Power for Modulation Condition To convert rated transmitter power to average power for analog television transmission, multiply by 0.8 (totally black picture + aural signal). For FM radio and digital television (DTV), the factor is 1.0. Transmission lines for AM radio at MF frequencies (530-1610 kHz) are usually peak power limited. At higher (HF) frequencies, the limitation is average power capability and the required derating factor, D.F., is:
2 D.F. = 1 + M 2
For example: Calculate power rating for 3" HJ8-50B cable operating at 100 MHz with VSWR = 1.1, F1 (from Figure 5) = 0.33: D.F. = 2 x 1.1 1.12 x (1 + 0.33) + 1 - 0.33 = 0.965
Average Power Rating at 1.00 VSWR = 42.4 kW (from page 566) Average Power Rating at 1.1 VSWR = 42.4 x 0.965 = 41.0 kW Derating Average Power for Direct Solar Radiation The average power handling capability of a cable exposed to direct solar radiation will be reduced. The appropriate derating factors for the different cable types are shown in Figure 6. The average radiation intensity for moderate climates is 200 W/m2 or less. Hot, dry climates give solar radiation intensities which at the hottest time of the day can be 1,000 W/m2 or higher. The mean value over the day, which is applicable to average power derating calculations provided absolute maximum temperatures are not exceeded, is up to 400 W/m2. These hot, dry locations are also subject to elevated ambient temperatures, which must also be considered (Figure 4).
where M is the modulation depth (100% = 1.0), expressed decimally. Average Power Rating Adjustment for Ambient Temperature The baseline power rating can be adjusted to meet the actual usage conditions. Figure 4 shows the variation of average power rating with ambient temperature. Derating Average Power for VSWR The derating factor (D.F) is calculated from the following formula: D.F. = 2 (VSWR) VSWR2 (1 + F1) + 1 - F1
where F1 is a factor that varies with frequency and line size. This calculation of derating factor is conservative in that it assumes all reflected power is re-reflected at the transmitter and absorption of the reflected signal by the line attenuation is small. Select the factor from the applicable curve in Figure 5, calculate factor D.F., and multiply by the average power from the cable characteristics table.
634
Figure 7 Average Daily Direct Normal Solar Radiation (MJ/m2), Annual
7.9
100
200 Miles
Values for average direct solar radiation for locations in the USA are shown in Figure 7. For conversion purposes, to determine a derating factor from Figure 6 from the information by location from Figure 7, 1 MJ/m2 over a 24-hour period is equivalent to 11.6 W/m2. Derating Average and Peak Powers for Altitude Derating factors for average and peak powers with altitude are shown in the following table. These factors have been determined assuming just nominal overpressure inside the transmission line. Both average and peak powers must be derated because the lower atmospheric pressure with increasing altitude reduces both heat transfer from inner and outer conductors, and the dielectric strength of the air inside the line.
Derating Average and Peak Powers for Altitude Altitude above Sea Level ft (m) 0 (0) 5000 (1524) 8000 (2438) 10500 (3200) 15000 (4572) P1/P Average Power 1.00 0.92 0.87 0.84 0.78 P1/P Peak Power 1.00 0.69 0.53 0.44 0.30
Efficiency The efficiency of a transmission line depends on its length and attenuation. The efficiency is defined as the percent of transmitter power which reaches the antenna. It can be calculated as: Efficiency = 100% 10 (dB) 10 where dB is the total attenuation of the transmission line at the frequency of interest. The remaining power is lost in the transmission line and is dissipated as heat.
635

Cables Heliax

Uploaded by

Copyright:

Available Formats

Cables Heliax

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Cables Heliax

Uploaded by

Copyright:

Available Formats

HELIAX Coaxial Cables

Ordering Information and Specifications

Applications and Technical Information

Coaxial Cable Selection Guide

HELIAX Coaxial Cable Selection Guide - 50-ohm, Foam Dielectric

1/4" 474 FSJ1-50A FSJ1RN-50B FSJ1RN-50B FSJ1RN-50B

Coaxial Cable Selection Guide

HELIAX Coaxial Cable Selection Guide - 50-ohm, Foam Dielectric

Fire Retardant Cables

Low VSWR Cables, Specially Tested Special Application Cables

U.K. 0800-250055 Australia 1800-803 219 New Zealand 0800-441-747

Visit us at: www.andrew.com

Coaxial Cable Selection Guide

Coaxial Cable Selection Guide

U.K. 0800-250055 Australia 1800-803 219 New Zealand 0800-441-747

Visit us at: www.andrew.com

Coaxial Cable Selection Guide

HELIAX Coaxial Cable Selection Guide - 50-ohm, Air Dielectric

Coaxial Cable Selection Guide

HELIAX Coaxial Cable Selection Guide - 50-ohm, Air Dielectric

U.K. 0800-250055 Australia 1800-803 219 New Zealand 0800-441-747

Visit us at: www.andrew.com

Coaxial Cable Selection Guide

HELIAX Coaxial Cable Selection Guide - 50-ohm, Air Dielectric

Coaxial Cable Selection Guide

U.K. 0800-250055 Australia 1800-803 219 New Zealand 0800-441-747

Visit us at: www.andrew.com

HELIAX Coaxial Cable Accept No Substitute

Heres a closer look at the benefits: Outstanding Electrical Performance

HELIAX Coaxial Cable Accept No Substitute

Long Service Life

Simplified System Planning

U.K. 0800-250055 Australia 1800-803 219 New Zealand 0800-441-747

Visit us at: www.andrew.com

HELIAX Coaxial Cable Accept No Substitute

Lower Installation Cost

ISO 9001 Certified

HELIAX Coaxial Cable Types

U.K. 0800-250055 Australia 1800-803 219 New Zealand 0800-441-747

Visit us at: www.andrew.com

Superflexible and Extraflexible Cables

Flexible Feeder Cables

Visit us at: www.andrew.com

LDF Series Foam Dielectric Cables

Air Dielectric Cables

The Outstanding Features of HELIAX Air-Dielectric Cables are:

Visit us at: www.andrew.com

HELIAX Cables and Connectors Now with Ten Year Warranty

HELIAX Coaxial Cable... Todays Alternative to Braided Cable

U.K. 0800-250055 Australia 1800-803 219 New Zealand 0800-441-747

Visit us at: www.andrew.com

HELIAX Coaxial Cable vs Coventional Braided Cables*

Conventional Braided Cables

2.6 (8.5) 5.0 (16.4) 7.4 (24.3) 8.5 (27.9)

2.7 (8.8) 5.1 (16.7) 7.5 (24.6) 8.6 (28.2)

0.460 0.255 0.182 0.167 0.129 0.109 0.072 0.056 0.040

1.43 0.794 0.568 0.521 0.403 0.341 0.224 0.174 0.125

1.35 0.753 0.541 0.497 0.387 0.328 0.218 0.170 0.123

0.91 0.44 0.29 0.26

0.91 0.44 0.29 0.26 0.19 0.16 0.096 0.070 0.046