Videofied Remote

F E A T U R E A P P L I C A T I O N
Manufactured by RSI Video Technologies

N O T E
April 2012

!!ATTENTION!!
This panel is equipped with software version XLP.03.50.11.XX which is compatible with the Videofied Remote Smartphone App for remote arm/disarm capabilities

Requirements
> Must be powered by A/C using Videofied part number PP4 or equivalent. It cannot function when running on batteries alone. > Must have a SIM enabled with an SMS plan > SMS texts incurs fees for every message sent or received

Please refer to the following pages for additional info and programming requirements

www.videofied.com

Videofied Remote

FE ATURE

APPLICATIO N

NOTE

Videofied

has developed a smartphone application for arming and disarming Videofied alarm panels that are configured to

communicate using GPRS. The Videofied Remote is available for Android, Blackberry, and Apple mobile operating systems.

Additional Requirements:
> X Series control panel (XT, XL, XTIP) with firmware version XLP.03.50.10.XXXX or newer. The version is listed on the product box, on the product label, and can be determined from the keypad by pressing the zero key six times followed by YES/OK. > IMPORTANT: The control panel must be powered by an external power supply with battery backup. If external power is lost the SMS feature will automatically disable after 30 minutes. > XTIP control panels must have connection strategy set to ETH+GPRS or GPRS. Videofied Remote is not functional when configured for ETH connection strategy only. > Ringtone must be set to AUTO with a minimum 30min Delay Before Off.

Additional Configuration Menus:

New menus have been added to configure the SMS feature for the Videofied Remote.

PROGRAMMABLE FEATURES

SMS

SMS DECODING Enabled/Disabled

Enabled: Enables remote arming or disarming Disabled: Disable remote arming or disarming

Enabled: Enables feedback SMS message to Videofied Remote Application (SMS charges apply)

SMS REPLY
Enabled/Disabled/Status-Version Disabled: Disable feedback SMS message Status/Version: Enables feedback only status SMS message to Videofied Remote application (SMS charges apply)

www.videofied.com

Videofied Remote

FE ATURE

APPLICATIO N

NOTE

Accessing Videofied Remote:

Locate the Videofied icon and click to activate application.

Blackberry

Android

Apple

Entering a new account into Videofied Remote:

The application supports remote control for up to 200

1. Open the Videofied Remote app and swipe to the left or right to access the Manage section. 2. Press the New button. The app will prompt for the following information. A. Name: Make sure to enter a name that gives a good description for the account to make it easy to understand which system is being remote controlled. B. Phone #: Enter the phone number of the SIM card installed in the control panel. This must include the area code and any preceding characters for calling long distance or international. C. Account #: Enter the account number of the control panel. This must be the account number that is programmed into the control panel. D. Feedback Phone #: Enter a phone number that you would like the confirmation SMS message sent to. This field is optional. If it is not filled and the panel is configured to send the confirmation back it will send it to the phone number the message was sent from.

3. Press Save when information for all entries are complete.

1. 2.

A. B. C. D. 3.

www.videofied.com

Videofied Remote

FE ATURE

APPLICATIO N

NOTE

How to Arm/Disarm with the Videofied Remote:

1. Open the Videofied Remote app. Swipe left or right to the Remote section.

2. Select the account to be remote controlled from the account list.

3. Choose the command to be sent: Arm,Disarm. The app will prompt for a valid user code. Type the code and press OK.

4. The app will confirm that the message is sent with a pop up screen.

www.videofied.com

Videofied Remote

FE ATURE

APPLICATIO N

NOTE

How to Arm Special Modes with the Videofied Remote:

1. Open the Videofied Remote app to the Remote section.

2. Select the account from the Account List.

3. Select SP1 or SP2. The app will prompt for a valid user code. Type in the code and press OK.

4. The app will confirm that the message is sent with a pop up screen.

Note: Disarming through the Videofied Remote is the same no matter the profile the system is currently armed in.

www.videofied.com

Videofied Remote

FE ATURE

APPLICATIO N

NOTE

Manage Section Overview:

Add, delete and edit accounts.

Creates new account entry

Edits the selected existing account

Deletes the selected account

Remote Section Overview:

Arms the system selected account in Fully Armed profile.

Fully disarms the system from any arming profile.

Arms the system for the selected Account in the SP1 profile. *The SP1 profile must be configured during installation.

Arms the system for the selected Account in the SP2 profile. *The SP2 profile must be configured during installation.

www.videofied.com

Videofied Remote

FE ATURE

APPLICATIO N

NOTE

Frequently Asked Questions:

Q1. How do I determine the arm / disarm status of the control panel? A1. The system cannot send back current status but will send back confirmation of a state change. In order to verify the system is armed or disarmed send the arm or disarm command to the panel to receive response. SMS REPLY must be set to ENABLED.

Q1. Can I request a video from the Videofied Remote App? A1. It is not possible to perform look-in or request video from the Videofied Remote App.

Q1. How do I get a new version of the Videofied Remote App? A1. All updates are pushed through the mobile operating system app store.

Q1. How many accounts can I control with my app? A1. The Videofied Remote app supports 200 systems.

Q1. Can I monitor my control panel with the Videofied Remote App? A1. No, the system must still be monitored by a certified 24 hour monitoring station.

EMEA SALES

23, avenue du Gnral Leclerc 92340 BOURG-LA-REINE FRANCE Hotline: +33 (0)820 846 620 Fax: +33 (0)1 82 69 80 10

USA SALES

1375 Willow Lake Blvd. #103 Vadnais Heights, MN 55110 USA Hotline: +1 877 206 5800 Fax: +1 651 762 4693

www.videofied.com
2011 RSI VIDEO TECHNOLOGIES. VIDEOFIED is a Registered Trademark of RSI VIDEO TECHNOLOGIES. S2View is a registered trademark of RSI VIDEO TECHNOLOGIES. Specifications subject to change without notice.