Temperature Measurement

TW10

Flanged Thermowell (Solid Machined)

Part of Your Business

TW10 Flanged Thermowell

(solid machined)
Model TW10 thermowells are manufactured from solid bar stock for the stem and from a flange certified to ASME, EN or DIN. They are installed into the process using a bolted flanged connection. The methods for welding the flange to the stem are full penetration, partial penetration, or screwed and welded. The welding technique is determined by the specific service condition of the thermowell. This design of thermowell will accept thermocouples (TC), resistance temperature detectors (RTD), as well as mechanical and digital thermometers. The dimension of the thermowell flange corresponds to the mating raised face diameter of the process flange. The flange surface finish is usually machined with a phonographic spiral serration to match the mating process flange. During installation a gasket is inserted between the process flange and the thermowell flange to maintain a pressure seal. The thermowell is then bolted to the process flange using the correct bolting torque forces for the bolt size and material.
INSTRUMENT THREAD

Fs

Bd H

B U

1/4" (6.4 mm)

STEPPED STYLE

Applications:
Chemical, process, apparatus and plant engineering; petrochemical; on/offshore High chemical loads High process loads
2 1/2" (63.5 mm)

Welding Options
INSTRUMENT THREAD WELD FLANGE GROOVE PREPARATION FLANGE WELD GROOVE PREPARATION FLANGE INSTRUMENT THREAD WELD INSTRUMENT THREAD

FLANGE THREAD WELL WELL WELL

FULL PENETRATION WELD

PARTIAL PENETRATION WELD

SCREWED and WELDED

Flange Faces

Flat Face

Raised Face
(DIN 2526 Form C & Form E, EN 1092-1 Form B1 & Form B2)

Ring Type Joint

Tongue Face
(DIN 2526 Form F, EN 1092-1 Form C)

Groove Face
(DIN 2526 Form N, EN 1092-1 Form D)

Thermowells

TW10 Flanged Thermowell (Solid Machined) Tapered, Straight, or Stepped Full Penetration, Partial Penetration, or Screwed and Welded ASME 1 to 4 inch (DIN/EN DN 25 to DN 100) ASME up to 2500 psig (DIN/EN up to PN 100) To ASME B16.5 standards, DIN 2526/2527 and EN 1092-1 Up to 62 inch (1575 mm) for single piece construction 0.244 to 0.702 inch (6.2 to 17.8 mm) Up to 72 inch (1828 mm)

Flanged Tapered

Thermowell Style:

Welding Options:

Flange Size:

Pressure Rating:

Flange Face:

Flanged Straight

Insertion Length:

Bore Size:

Bore Depth:

Electrical Approvals:

CSA, FM Wake frequency calculations Quality certificates Specialized polymer or metallic coating of wetted parts Stainless steel plug or cap with chain Flanged Stepped

Options:

Product tagging Shot peening Multi-piece construction for bore depths greater than 72 inch Economical construction for exotic materials (stainless steel flange with washer disc)

TW10
Part Number TW10-X-X-X-XXXXX-X-XXXXXXXX XXXXXXXXXXXXXXXXXX-XX

Use the following table to identify and trace available codes easily.

10

11

Welding options [W]

Code F P R S B Full penetration welded Partial penetration, fillet a=3 mm (minimum) Partial penetration, fillet a=6 mm (minimum) Screwed and welded Screwed and welded both side of flange

Flange face
A B C D E F G H K L M N FF (flat face) RF (raised face) RTJ (ring type joint) RFSF (raised face smooth finish) DIN 2526 Form C DIN 2526 Form E DIN 2526 Form N DIN 2526 Form F EN 1092-1 Form B1 EN 1092-1 Form B2 EN 1092-1 Form C EN 1092-1 Form D

10

Head length [H]

01770 02250 02360 03250 04250 05250 00045 00057 00060 00083 00102 00108 00133 ***** 1.77 inch 2.25 inch 2.36 inch 3.25 inch 4.25 inch 5.25 inch 45 mm 57 mm 60 mm 83 mm 102 mm 108 mm 133 mm Please specify (e.g. 3.5 inch = 03500) (e.g. 84 mm = 00084)

Thermowell style
A B C Tapered Straight Stepped

Unit of measure
I M Imperial Metric

Instrument connection
UD UF GF UE GD TD GE TE SD SG SI MC MK MJ TH MD 1/2 NPT female 1/2 NPT-CSA female 1/2 NPSM 3/4 NPT female G 1/2 B male G 1/2 female G 3/4 B male G 3/4 female M14 x 1.5 female M18 x 1.5 female M20 x 1.5 female M20 x 1.5 male M24 x 1.5 female M24 x 1.5 male M27 x 2.0 female M27 x 2.0 male

11

Flange material
G3 G1 F1 G5 G6 G8 G4 G2 H1 H2 H3 H4 H5 B1 B2 B3 C1 C2 L7 D1 E1 E2 A2 A1 A3 I1 L5 L6 L1 L4 L2 L3 S1 S2 S3 S4 S5 S6 Stainless steel 316/316L Stainless steel 304/304L Carbon steel A105 Stainless steel 310 Stainless steel 321 Stainless steel 347 Stainless steel 316H Stainless steel 304H Carbon steel F11 Carbon steel F22 Carbon steel F5 Carbon steel F9 Carbon steel F91 Inconel 600 Inconel 601 Inconel 625 Incoloy 800H/HT Incoloy 825 Titanium grade II (3.7035) Monel 400 Nickel 200 Nickel 201 Hastelloy C-276 Hastelloy B-2 Hastelloy C-4 Stainless steel 410 Stainless steel 1.4571 Stainless steel duplex (1.4462) Carbon steel 1.7335 (13CrMo44) Carbon steel 1.5415(15Mo3/16Mo3) Carbon steel 1.7380 (10CrMo910) Carbon steel 1.0460 (C22.8) Hastelloy C-4 / Stainless steel Hastelloy C-276 / Stainless steel Monel 400 / Stainless steel Nickel 200 / Stainless steel Nickel 201 / Stainless steel Titanium Grade II / Stainless steel

Flange size [Fs]

A B C D E F G I K L N P S U W Y 1 ASME 1 inch ASME 1 1/4 inch ASME 1 1/2 inch ASME 2 inch ASME 2 1/2 inch ASME 3 inch ASME 4 inch EN 1092-1 DN 25 EN 1092-1 DN 40 EN 1092-1 DN 50 EN 1092-1 DN 80 EN 1092-1 DN 100 DIN 2526/2527 DN 25 DIN 2526/2527 DN 40 DIN 2526/2527 DN 50 DIN 2526/2527 DN 80 DIN 2526/2527 DN 100

Pressure rating
D E F H J K L M P Q R S T 150 psig 300 psig 400 psig 600 psig 900 psig 1500 psig 2500 psig PN 6 PN 16 PN 40 PN 63 PN 64 PN 100

Pipe schedule / Intern. nozzle dia.

2 3 1 4 N Schedule 40 (Standard N.A.) Schedule 80 Schedule 160 Schedule XXS WIKA (Standard Germany)

Insertion length [U]

***** Please specify; maximum 62 inch (1575 mm) (e.g. 8.5 inch = 08500) (e.g. 240 mm = 00240)

Note: Some configurations are unavailable. Your WIKA sales person will notify you if you have made an incorrect selection.

12

13

14

15

16

17

18

19

12

Bar material
G3 G1 F1 G5 G6 G8 G4 G2 H1 H2 H3 H4 H5 B1 B2 B3 C1 C2 A5 D1 E1 E2 A2 A1 A3 I1 I2 A4 L6 L5 L1 L4 L2 L3 F2 Stainless steel 316/316L Stainless steel 304/304L Carbon steel A105 Stainless steel 310 Stainless steel 321 Stainless steel 347 Stainless steel 316H Stainless steel 304H Carbon steel F11 Carbon steel F22 Carbon steel F5 Carbon steel F9 Carbon steel F91 Inconel 600 Inconel 601 Inconel 625 Incoloy 800H/HT Incoloy 825 Titanium Grade II Monel 400 Nickel 200 Nickel 201 Hastelloy C-276 Hastelloy B-2 Hastelloy C-4 Stainless steel 410 Stainless steel 446 Hastelloy C-22 Stainless steel duplex (1.4462) Stainless steel 1.4571 Carbon steel 1.7335 (13CrMo44) Carbon steel 1.5415 (15Mo3/ 16Mo3) Carbon steel 1.7380 (10CrMo910) Carbon steel 1.0460 (C22.8) Carbon steel 1018

13

Bar diameter [Bd]

M N O P R S U W X Y G D A E 1.000 inch (25.4 mm) 1.125 inch (28.6 mm) 1.250 inch (31.8 mm) 1.315 inch (33.4 mm) 1.375 inch (34.9 mm) 1.500 inch (38.1 mm) 1.750 inch (44.5 mm) 2.000 inch (50.8 mm) 2.250 inch (57.2 mm) 2.500 inch (63.5 mm) 2.750 inch (69.9 mm) 30 mm (1.181 inch) 32 mm (1.260 inch) 34 mm (1.339 inch)

16

Tip diameter [V]

0500 0625 0750 1000 0127 0160 0190 0220 0250 **** 0.500 inch 0.625 inch 0.750 inch 1.000 inch 12.7 mm 16 mm 19 mm 22 mm 25 mm Please specify (e.g. 1.5 inch = 1500) (e.g. 24 mm = 0240)

17

RTD / TC / Thermometer assembly

1A 1B 1C 1D 1F YY ZZ TR10 Industrial RTD assembly TC10 Industrial TC assembly TR15 Remote RTD assembly TC15 Remote TC assembly TR75 DiwiTherm Dial Thermometer (Bimetal / Gas actuated) Without

14

Bore size [B]

E A F G M N B P R S C D 0.244 inch (6.2 mm) 0.260 inch (6.6 mm) 0.276 inch (7.0 mm) 0.323 inch (8.2 mm) 0.335 inch (8.5 mm) 0.354 inch (9.0 mm) 0.385 inch (9.8 mm) 0.402 inch (10.2 mm) 0.433 inch (11.0 mm) 0.480 inch (12.2 mm) 0.512 inch (13 mm) 0.702 inch (17.8 mm)

18

Certificates
1 Z Quality certificates Without

19

Additional order details

T Z Additional text Without

15

Root diameter [Q]

0500 0750 0875 1000 1063 0190 0220 0250 0270 **** 0.500 inch 0.750 inch 0.875 inch 1.000 inch 1.063 inch 19 mm 22 mm 25 mm 27 mm Please specify (e.g. 1.5 inch = 1500) (e.g. 24 mm = 0240)

WIKA worldwide
Europe
Austria WIKA Messgertevertrieb Ursula Wiegand GmbH & Co. KG 1230 Wien Phone: (+43) 1-86 91 631 Fax: (+43) 1-86 91 634 E-mail: [email protected] www.wika.at Benelux WIKA Benelux 6101 WX ECHT Phone: (+31) 475-535 500 Fax: (+31) 475-535 446 E-mail: [email protected] www.wika.nl Bulgaria WIKA Bulgaria EOOD 1309 Sofia Phone: (+359) 2 82138-10 Fax: (+359) 2 82138-13 E-Mail: [email protected] Finland WIKA Finland Oy 00210 Helsinki Phone: (+358) 9-682 49 20 Fax: (+358) 9-682 49 270 E-mail: [email protected] www.wika.fi France WIKA Instruments s.a.r.l. 95610 Eragny-sur-Oise Phone: (+33) 1-34 30 84 84 Fax: (+33) 1-34 30 84 94 E-mail: [email protected] www.wika.fr Germany WIKA Alexander Wiegand GmbH & Co. KG 63911 Klingenberg Phone: (+49) 93 72-13 20 Fax: (+49) 93 72-13 24 06 E-mail: [email protected] www.wika.de Italy WIKA Italiana SRL 20020 Arese (Milano) Phone: (+39) 02-93 86 11 Fax: (+39) 02-93 86 174 E-mail: [email protected] www.wika.it Poland Kujawska Fabryka Manometrow -KFM S.A. 87-800 Wloclawek Phone: (+48) 542 30 11 00 Fax: (+48) 542 30 11 01 E-mail: [email protected] www.wikapolska.pl Romania WIKA Instruments Romania S.R.L. Bucuresti, Sector 5 Calea Rahovei Nr. 266-268 Corp 61, Etaj 1 Phone: (+40) 21 4563138 Fax: (+40) 21 4563137 E-mail: [email protected] Russia ZAO WIKA MERA 127015 Moscow Phone: (+7) 495-648 01 80 Fax: (+7) 495-648 01 81 E-mail: [email protected] www.wika.ru Serbia WIKA Merna Tehnika d.o.o. 11060 Belgrade Phone: (+381) 11 27 63 722 Fax: (+381) 11 75 36 74 Mail: [email protected] www.wika.co.yu Spain Instrumentos WIKA, S.A. C/Josep Carner, 11-17 08205 Sabadell (Barcelona) Phone: (+34) 902 902 577 Fax: (+34) 933 938 666 E-Mail: [email protected] www.wika.es Switzerland MANOMETER AG 6285 Hitzkirch Phone: (+41) 41-919 72 72 Fax: (+41) 41-919 72 73 E-mail: [email protected] www.manometer.ch Ukraine WIKA Pribor GmbH 83016 Donetsk Phone: (+38) 062 345 34 16 Fax: (+38) 062 345 34 17 E-mail: [email protected] www.wika.donetsk.ua United Kingdom WIKA Instruments Ltd Merstham, Redhill RH13LG Phone: (+44) (0) 1737 644 008 Fax: (+44) (0) 1737 644 403 E-mail: [email protected] www.wika.co.uk

Africa / Middle East

Egypt WIKA Alexander Wiegand GmbH & Co. KG Representative Office 11 El Sheikh Ahmed El - Sawy from Makram Ebaid Nasr City, Cairo Phone: (+20) 2 - 227 33 140 Fax: (+20) 15 3266 1650 E-mail: [email protected] Iran WIKA Instrumentation Pars Kish Ltd. 4th Alley, Ghaem Magham Ave Tehran Phone: (+98) 21 8852 6730-3 Fax: (+98) 21 8875 7413 E-mail: [email protected] www.wika.ir South Africa WIKA Instruments (Pty.) Ltd. Gardenview, Johannesburg 2047 Phone: (+27) 11-621 00 00 Fax: (+27) 11-621 00 59 E-mail: [email protected] www.wika.co.za United Arab Emirates WIKA Middle East FZE Jebel Ali, Dubai Phone: (+971) 4 - 883 90 90 Fax: (+971) 4 - 883 91 98 E-mail: [email protected]

Japan WIKA Japan K. K. Tokyo 105-0023 Phone: (+81) 3-54 39 66 73 Fax: (+81) 3-54 39 66 74 E-mail: [email protected] Kazakhstan TOO WIKA Kazakhstan 050050 Almaty Phone: (+7) 32 72 33 08 48 Fax: (+7) 32 72 78 99 05 E-mail: [email protected] Korea WIKA Korea Ltd. Seoul 153-023 Phone: (+82) 2 - 8 69 05 05 Fax: (+82) 2 - 8 69 05 25 E-mail: [email protected] Malaysia WIKA Instrumentation (M) Sdn. Bhd. 47100 Puchong, Selangor Phone: (+03) 80 63 10 80 Fax: (+03) 80 63 10 70 E-mail: [email protected] www.wika.com.my Singapore WIKA Instrumentation Pte. Ltd. 569625 Singapore Phone: (+65) 68 44 55 06 Fax: (+65) 68 44 55 07 E-mail: [email protected] www.wika.com.sg Taiwan WIKA Instrumentation Taiwan Ltd. Pinjen, Taoyuan Phone: (+886) 3 420 6052 Fax: (+886) 3 490 0080 E-mail: [email protected] www.wika.com.tw

North America
Canada WIKA Instruments Ltd. Head Office Edmonton, Alberta, T6N 1C8 Phone: (+1) 780-463 70 35 Fax: (+1) 780-462 00 17 E-mail: [email protected] www.wika.ca Mexico Instrumentos WIKA Mexico S.A. de C.V. 01210 Mexico D.F. Phone: (+52) 555 020 53 00 Fax: (+52) 555 020 53 01 E-Mail: [email protected] www.wika.com.mx USA WIKA Instrument Corporation Lawrenceville, GA 30043 Phone: (+1) 770-513 82 00 Fax: (+1) 770-338 51 18 E-mail: [email protected] www.wika.com

South America
Argentina WIKA Argentina S.A. Buenos Aires Phone: (+54) 11-4730 18 00 Fax: (+54) 11-4761 00 50 E-mail: [email protected] www.wika.com.ar Brazil WIKA do Brasil Ind. e Com. Ltda. CEP 18560-000 Iper - SP Phone: (+55) 15-3459 97 00 Fax: (+55) 15-3266 16 50 E-mail: [email protected] www.wika.com.br

Asia
China WIKA International Trading (Shanghai) Co., Ltd. 200001 Shanghai Phone: (+86) 21 - 53 85 25 72 Fax: (+86) 21 - 53 85 25 75 E-mail: [email protected] India WIKA Instruments India Pvt. Ltd. Village Kesnand, Wagholi Pune - 412 207 Phone: (+91) 20 - 66 29 32 00 Fax: (+91) 20 - 66 29 33 25 E-mail: [email protected] www.wika.co.in

Australia
Australia WIKA Australia Pty. Ltd. Rydalmere, NSW 2116 Phone: (+61) 2 - 88 45 52 22 Fax: (+61) 2 - 96 84 47 67 E-mail: [email protected] www.wika.com.au New Zealand Process Instruments Limited Auckland 1004 Phone: (+64) 9 - 620 41 69 Fax: (+64) 9 - 620 82 53 E-mail: [email protected] www.processi.co.nz

WIKA Alexander Wiegand GmbH & Co. KG Alexander-Wiegand-Strae 30 63911 Klingenberg Germany Tel. (+49) 9372/132-0 Fax (+49) 9372/132-406 E-Mail [email protected] www.wika.de
12838471 01/2008 GB