Scribd
Upload
79 views1 page

mc2 Lab

This laboratory aims to familiarize students with the operation of synchronous machines and induction motors through hands-on experiments. Students will conduct tests on alternators to determine regulation using various methods and impedance measurements. Experiments will also be performed on synchronous motors to obtain V and inverted V curves. Tests on three-phase and single-phase induction motors will include load tests, no-load tests, and blocked rotor tests to evaluate performance and separate losses.

Uploaded by

syed1188
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
79 views1 page

mc2 Lab

This laboratory aims to familiarize students with the operation of synchronous machines and induction motors through hands-on experiments. Students will conduct tests on alternators to determine regulation using various methods and impedance measurements. Experiments will also be performed on synchronous motors to obtain V and inverted V curves. Tests on three-phase and single-phase induction motors will include load tests, no-load tests, and blocked rotor tests to evaluate performance and separate losses.

Uploaded by

syed1188
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

LTPC 10133EE509 ELECTRICAL MACHINES II LABORATORY AIM To expose the students to the operation of synchronous machines and induction

motors and give them experimental skill. 1. Regulation of three phase alternator by emf and MMF methods. 2. Regulation of three phase alternator by ZPF and ASA methods. 3. Regulation of three phase salient pole alternator by slip test. 4. Measurements of negative sequence and zero sequence impedance of alternators. 5. V and Inverted V curves of Three Phase Synchronous Motor. 6. Load test on three-phase induction motor. 7. No load and blocked rotor test on three-phase induction motor. 8. Separation of No-load losses of three-phase induction motor. 9. Load test on single-phase induction motor. 10. No load and blocked rotor test on single-phase induction motor. 003 2

TOTAL: 45 PERIODS

You might also like