Scribd
Upload
6K views

Ericsson 2g Commands

This document contains various commands used to check the status and configuration of GPRS and BTS equipment. Some of the key commands include: - rldep:cell=all; - Prints the LAC/CI to check cell identification - rxmop:mo=rxotrx-39-0&&-11; - Counts the number of TRX to check equipment status - rxtcp:mo=rxotg-<tg#>; - Checks cell configuration and locks status The document lists several commands starting with rx, rl, bl, and rlg to check alarms, reset cells/BTS, block and unblock RPs, and enable or disable GPRS on the network

Uploaded by

Jc Ramirez
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
6K views

Ericsson 2g Commands

This document contains various commands used to check the status and configuration of GPRS and BTS equipment. Some of the key commands include: - rldep:cell=all; - Prints the LAC/CI to check cell identification - rxmop:mo=rxotrx-39-0&&-11; - Counts the number of TRX to check equipment status - rxtcp:mo=rxotg-<tg#>; - Checks cell configuration and locks status The document lists several commands starting with rx, rl, bl, and rlg to check alarms, reset cells/BTS, block and unblock RPs, and enable or disable GPRS on the network

Uploaded by

Jc Ramirez
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 1

GPRS: exrpp:rp=all; --> check RP value exemp:rp=xx,em=all; rlgse:cell=xx; --> disable GPRS rlgsi:cell=xx; --> enable GPRS blrpi:rp-xx,forced

-> block RP blrpe:rp-xx; -> unblock RP BTS reset: rxasp:mo=rxotg-xx; --> check alarms rxtcp:mo=rxotg-xx; --> check status rxmsp:mo=rxotg-xx-x,subord; rxbli:mo=rxotrx-xx-x,subord,force; --> locking rxese:mo=rxotrx-xx-x,subord; rlstp:cell=<7digitcellname>; --> check status rlstc:cell=<7digitcellname>,state=<active or halted>; --> reset cell/BTS rxmop:moty=rxotg; output TG tranceiver group = BCF rldep:cell=all; print LAC/CI rxtcp:mo=rxotg-39; check if 900/1800 G1=900 D1=1800

rxmop:mo=rxotrx-39-0&&-11; count TRX rxasp:mo=rxotg-39; check alarms rxtcp:mo=rxotg-<tg#>; ---cell name rldep:cell=<cellname>; -----cell ID,SAC, LAC rxcdp:mo=rxotg-<tg#>; ----know the config, UNLOCK rxtcp:moty=rxotg;----------all site rxasp:mo=rxotg-<tg#>;-----alarms allip:acl=a1;----------------all alarms rxmop:mo=rxotrx-26-0&&-11; ------know the TRX counts rxmop:moty=rxotg;--------know all site rlcrp:cell=<site name> -----traffic query rlcfp:cell=BSCRZG1; freq rltdp:msc=all; -MSC query rxmfp:mo=rxotf-<tg#>; specific alarm

You might also like