0% found this document useful (0 votes)
126 views

Drill Pipe Inspection Tally Sheet: International Limited

1) This document is a drill pipe inspection tally sheet from JC International Limited for Seadrill reporting on the inspection of drill pipe. 2) It provides details of the inspection including pipe specifications, location, report number, categories inspected, and condition assessments of various parts of the drill pipe. 3) The bottom section summarizes the results, classifications, and inspector details.

Uploaded by

Michael Okwuwa
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
126 views

Drill Pipe Inspection Tally Sheet: International Limited

1) This document is a drill pipe inspection tally sheet from JC International Limited for Seadrill reporting on the inspection of drill pipe. 2) It provides details of the inspection including pipe specifications, location, report number, categories inspected, and condition assessments of various parts of the drill pipe. 3) The bottom section summarizes the results, classifications, and inspector details.

Uploaded by

Michael Okwuwa
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

JC International Limited

CUSTOMER: SEADRILL P.O. NO.: SIZE 5.7/8" SPECIFICATION ID No. GRADE S - 135 DS1 STD

489909

Port Harcourt Office: Plot 5 JC Street, Off Peter Odili Road, P.O. Box 6427 Trans Amadi Port Harcourt, Rivers State. Tel: +234-84Lagos Office: 56A Bourdillon Road, P.O. Box 52224 Ikoyi. Tel: +234-1-842-5813 E-mail: [email protected] Website: www.jcinternationalng.com LOCATION: JCI BASE T 26 A

DRILL PIPE INSPECTION TALLY SHEET


JOB NO.

W.O No.: DATE:


RANGE R-3 COATED YES N0 WORN TALLY Pin Length 5.5/8 5.5/8 5.5/8 Tong MPI/UT

REPORT No.:2903
WEIGHT 26.70 Lbs CATEGORY 1 2 NOM. WALL THICKNESS 0.415" 3 4 BOX TOOL JOINT Min
Wall Thick.

20-03-2012

TOOL JOINT 7"0D X 3.3/4 1D X 5.1/2 FH VAM

HDLS

HARDBANDED

YES

PIPE BODY OD
Wear Corrosion Int.Coat

PIN TOOL JOINT Box


Lenght

SMU 1 SMU 2 SMU 3

A A A

0.523 0.526 0.525

7 7 7

ACC ACC ACC

6.11/16 6.1/16 6.11/16

5/8 5/8 5/8

5.5/16 5.5/16 5.5/16

3/8 3/8 3/8

7/32 7/32 7/32

11.9/32 11.3/16 11.3/16

ACC SD ACC

OK OK OK

3.25/32 3.25/32 3.25/32

7 7 7

6.23/32 6.23/32 6.23/32

5/16 5/16 5/16

5/16 5/16 5/16

10 10 8.29/32

Int.

Ext.

Cond.

EM

Gouge Slip Cuts

en t

on

Dia

Depth

Dia.

Width

Space

Upset

Dia

Width

Width

Length

Space

on

OD

HB COND

Bevel

Counterbore

Seal Width

Shldr.

Tong

MPI

Bevel ID OD

Seal

Shldr.

Neck

d.

d.

FINAL CLASS

Length
Ft.

REMARK

Upset ACC ACC ACC P P P

ACC ACC ACC

45.08 45.08 45.97

Max. Reqd. Min. Reqd.

Joint with Pin for Repair Joint with Box for Repair Joint with Pin & Box for Repair Pin Refaced / Rebeveled Box Refaced / Rebeveled Bent Pipes

0 0 0 0 0 0

REMARK

PREMIUM CLASS 2 SCRAP TOTAL

SD = Seal Damage TD = Thread Damage BB = Belled Box ST = Streched Thread PT = Pitted Thread PS = Pitted Seal GT = Galled Thread WO = Wash Out

CLASSIFICATION

CRK = Crack STJ = Short Tool Joint HBD = Hard Band Damage RF = Refaced ACC = Acceptable REJ = Rejected NA = Not Applicable

Inspector :

SIMON OGBAN

Qualification ASNT LEVEL II

Sign Date

20/03/2012

Member

You might also like