International Limited International Limited: JC JC
Uploaded by
Michael OkwuwaInternational Limited International Limited: JC JC
Uploaded by
Michael OkwuwaJC International Limited RC.
413243
Port Harcourt Office: Plot 5 JC Street, Off Peter Odili Road, P.O. Box 6427 Trans Amadi Port Harcourt, Rivers State. Tel: +234-84-489909 Lagos Office: 56A Bourdillon Road, P.O. Box 52224 Ikoyi. Tel: +234-1-842-5813 E-mail: [email protected] Website: www.jcinternationalng.com
HEAVY WEIGHT DRILL PIPE INSPECTION REPORT
ROTARY SHOULDER CONNECTIONS
CUSTOMER:
SEADRILL (WEST CAPELLA)
RIG:
LOCATION: JCI BASE
W.O.NO.
P.O. No.:
W.O. No.:
REPORT NO.
HEAVY WEIGHT SIZE: 5.7/8" H.W.D.P CONNECTION: 5.1/2 FH VAM EIS
2905
DATE:20-03-20112
INSPECTION PROGRAME:
VISUAL TUBE, VISUAL CONNECTION, MPI SLIP/UPSET, BLACKLIGHT CONNECTION, DIMENSIONAL 3
SPECIFICATION:
DS-1 STANDARD.
CATEGORY
1
ALL DIMENSIONS IN INCHES BOX TOOL JOINT PIN TOOL JOINT
3-5
CENTER WEAR PAD
IDENTIFICATION NO
TUBE COND.
LENGTH (FT)
OD
HB COND
Bevel Dia.
Seal Width
Counterbore Dia Depth
Boreback Length Dia
Lead Gauge
Tong Space
Cond
MPI Upset
ID
OD
HB OD
Bevel Dia.
Neck Length
SRG Width Dia
Lead Gauge
Tong Space
Cond
MPI Upset
Side OD Box Side
ACC ACC ACC ACC
Pin Side
ACC ACC ACC ACC ACC
MPI Box Pin Side Side
ACC ACC ACC ACC ACC ACC ACC ACC ACC ACC
118458 118486 118480 118480 118483
ACC BENT ACC ACC ACC
30.43 30.42 30.42 30.33 30.35
7 7 7 7 7
ACC ACC ACC ACC ACC
6.29/32 6.29/32 6.29/32 6.29/32 6.29/32
3/8 3/8 3/8 3/8 3/8
5.15/16 5.15/16 5.15/16 5.15/16 5.15/16
5/8 5/8 5/8 5/8 5/8
20.9/16 BELLED BOX ACC 20.1/2 20.5/8 20.3/4 19.1/2 ACC G/T ACC ACC ACC ACC ACC ACC
4 4 4 4 4
7 7 7 7 7
ACC ACC ACC ACC ACC
6.11/16 6.11/16 6.11/16 6.11/16 6.11/16
3/4 3/4 3/4 3/4 3/4
NA NA NA NA NA
NA NA NA NA NA
21 21 21 21 21
G/T G/T ACC G/T ACC
OK OK OK OK OK
6.3/8 6.3/8 6.3/8 6.3/8 6.3/8
ACC
Max Reqd. Min. Reqd.
SD = Seal Damage TD = Thread Damage BB = Belled out Box ST = Streched Thread GT = Galled Thread
CRK = Crack WO = Wash Out CS = Corroded Seal CT = Corroded Thread STJ = Short Tool joint
RF = Refaced ACC = Acceptable REJ = Rejected N/A = Not Applicable HB = Hard Band
LENGTHS READY FOR USE LENGHTS WITH PIN CONN. REJECTED LENGHTS WITH BOX CONN. REJECTED LENGHTS WITH PIN & BOX CONN. REJECTED TOTAL LENGTH INSPECTED
1 2 1 1 5
CONNECTIONS REFACED
COMMENTS: NO 2 WITH SN 118486 IS BENT & PIN G/T. NO 1 WITH S/N 118458 IS BELLED OUT BOX & PIN G/T. NO 3 IS ACCEPTABLE FOR USE AS AT THE TIME OF INSPECTION. NO 4 IS PIN GALLED THREAD. NO 5 IS ACCEPTABLE FOR USE AS AT THE TIME OF INSPECTION 20/03/2012
DATE:
CUSTOMER SIGNATURE:..
INSPECTOR:
SIMON OGAB
ASNT LEVEL II
Member
