Dehumidifier - Munters MX2700

MUNTERS PRODUCT INFORMATION
MX Series Desiccant Dehumidifier

Complete Dehumidification Package
MX2700
Performance and Reliability
Desiccant dehumidification high efficiency, even below 0 C Rotor configuration option high capacity with very low dewpoints Reactivation heater choice economical operating costs Rugged ALUZINK frame and panels corrosion resistant construction Efficiently designed electrical system enhanced reliability
Installation and Operation

Microprocessor based control system functions and operation status display Base control start/stop/ humidistat and diagnostic fault display Remote automatic control and display adaptable to the application Pressure and airflow test points built-in confidence Easily removed access panels fast installation and service Replaceable EU3 filter enhances air quality Reinforced frame for fork-lifts and cranes eases installation and service Unit requires minimal floor area allows installation in confined spaces Duct connections conform to ISO 7807 standards simplifies air duct installation
Product Description
The MX2700 desiccant dehumidifier is designed to efficiently dehumidify in low moisture applications. Its airtight construction delivers accurate conditions and optional features provide versatility to adapt the system for specific applications. Its rugged formed metal frame and access panels are produced from corrosion resistant ALUZINK. Standard equipment includes either a base control package or an optional microprocessor-based controller. The electrical control system conforms to EN 60204 (IEC204) standards. The electrical components are mounted on busbars and are constructed of halogenfree plastic. The electrical system is designed for up to 690V and 60 C. MX Series dehumidifiers conform to both harmonised European Standards and to CE marking specifications.
Munters Rotor Technology

The desiccant rotor is manufactured from a corrugated composite material that is highly effective at attracting and holding water vapour. Every Munters dehumidifier applies a unique rotor technology. Airflows, air conditions, rotor sections, and rotor rotation speeds are optimised for specific applications. An innovative control system maximises the units energy efficiency. A characteristic of the MX Series rotor technology is the precision seals which divide the air distribution chamber. These provide a precise airflow balance for dehumidification and reactivation while allowing for alternative fan placement and rotor sectioning. Additional sectors for low dewpoints and heat recovery are optional.
Reactivation air
3
Wet air
1
Dry air Process air
Model MX2700
Diagram measurements are for reference only. Scaled and dimensioned AutoCAD drawings are available in Munters' DryCap program.
Dehumidification capacity
Approximate capacity in kg/h. For more detailed information, please contact your nearest Munters location or refer to Munters' DryCap program. 1. Process air temperature, C 2. Process air relative humidity, % RH 3. Dehumidification capacity, kg/h (moisture removal kg/hour)
4 2
Dehumidification capacity, kg/h
25
1
80%
RH
RH
20
60%
40
RH
15
10
Width (A) Width (D) Depth (B) Height (C) 800 mm 1695 mm 800 mm
Dry air
Wet air
Weight
1585 mm 200300 mm 100300 mm 380 kg Gas consumption3 (m/h) ________ 3,12 Natural gas pressure (mbar) _____ 1299 Max sulphur content (ppm) HPS Rotor ______________________ 30 Standard gas line fitting (BSP) ____ 3/4" Reactivation air heater Heater power (kW) _____________ 30,6 Temperature increase across heater (C) ____________________ 102 Miscellaneous data Operating temperature (C) _ 20 / +40 Drive motor power (W) ___________ 10 Max noise level unducted (dBA) ___ 78 Air filter, standard ______________ EU3 IEC protective class (unit) ________________________ IP44 (electrical panel) ______________ IP54 Fan motor winding insulation grade _____________ Class F Drive motor winding insulation grade _____________ Class F High temperature cut-out (C) __ 1605 MX(B),MXT(B) Electrical equipment Connection plug, remote automatic control ___ Standard Connection plug, total alarm ________________ Standard
0 10
10
20
30
Technical Specifications
Process air1 Rated airflow (m/s) ____________ 0,75 Rated airflow (m/h) ____________ 2700 Available static pressure (Pa) ______ 300 Fan motor power (kW) ___________ 3,0 Reactivation air1 Rated airflow (m/s) ____________ 0,25 Rated airflow (m/h) _____________ 900 Available static pressure (Pa) ______ 300 Fan motor power (kW) ___________ 1,5 Total power, Reactivation voltage and ElecSteam/ current (amphs/phase) trical Gas Total power (kW) _____ 35,38 ____ 4,78 200V 3~50/60Hz (A) _ 106,1 ____ 17,9 220V 3~50/60Hz (A) _ 98,3 _____ 17,9 230V 3~50/60Hz (A) _ 94,6 _____ 17,8 380V 3~50/60Hz (A) _ 56,7 _____ 10,2 400V 3~50Hz (A) ____ 54,4 _____ 10,3 415V 3~50Hz (A) ____ 52,8 _____ 10,2 440V 3~60Hz (A) ____ 50,3 _____ 10,1 500V 3~50Hz (A) ____ 43,6 ______ 8,2 Steam consumption2 (g/s) ______ 14,51 Max steam working pressure (bar) ___ 7
1 2 3
Temperature, C
Options
Standard equipment includes choice of internal reactivation heater (electric, steam, or gas) and choice of control panel (microprocessor-based control or base control). Blocked filter alarm Rotor stopped alarm Remote control with separate control relay Humidity control system with alarm and display Refer to the RH98 product data sheet Isolated process air inlet (at precooling) Pushing process air fan High capacity EU7 filter (process and reactivation air inlets) By-pass channel with damper and actuator Additional rotor section for low dewpoints and/or heat recovery Reversible assembly for optional left or right hand process air and reactivation air connection Stainless steel sheet metal casing
Stated performance based on 20C and air density of 1,2kg/m Steam consumption calculated at 2106,6 kJ/kg at 500kPa (g) Gas consumption calculated at 30,88 MJ/m3 Distributor
Munters Europe AB Dehumidification Division Box 434 S-191 24 Sollentuna SWEDEN Tel: +46 8 626 63 00 Fax:+46 8 626 63 65
DH/MEA/PGBint-0028-08/98
Produced by Wikstrms, Uppsala, Sweden Printed matter. License 341 051
Munters Europe AB www.munters.com
Subject to change without notice.

Dehumidifier - Munters MX2700

Uploaded by

Copyright:

Available Formats

Dehumidifier - Munters MX2700

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Dehumidifier - Munters MX2700

Uploaded by

Copyright:

Available Formats

MUNTERS PRODUCT INFORMATION

MX Series Desiccant Dehumidifier

Installation and Operation

Munters Rotor Technology

Dry air Process air

Dehumidification capacity, kg/h

Produced by Wikstrms, Uppsala, Sweden Printed matter. License 341 051

Munters Europe AB www.munters.com

Subject to change without notice.

You might also like