Scribd
Upload
176 views1 page

Simple JDM

This document describes a serial programmer that is used to program small PIC microcontrollers over a RS232 serial port, with power supplied directly from the serial port rather than an external power supply. Instructions are provided for building the programmer based on a schematic from an online source, along with a recommendation for downloading software called "Win PIC Programmer" to use with it. The programmer has been tested successfully with PIC16f84A and PIC16f628A microcontrollers.

Uploaded by

winuxue
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
176 views1 page

Simple JDM

This document describes a serial programmer that is used to program small PIC microcontrollers over a RS232 serial port, with power supplied directly from the serial port rather than an external power supply. Instructions are provided for building the programmer based on a schematic from an online source, along with a recommendation for downloading software called "Win PIC Programmer" to use with it. The programmer has been tested successfully with PIC16f84A and PIC16f628A microcontrollers.

Uploaded by

winuxue
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

I have built this project to burn my small PIC's This is a serial programmer works on the RS232 ( PC serial port

), known as JDM Programmer, thanks to the site http://pic16f84.hit.bg/ which contains the schematic and the programmer software. The programmer is powered from the Serial port itself, so there's no need to any external power supply. But be careful this circuit will not work with the Laptop Serial port due to the weak voltages it has. - I have used a very nice programmer software called "Win PIC Programmer" you can download it from http://freenet-homepage.de/dl4yhf/winpicpr.html, it's very stable and powerful. The project has been tested with the following IC's : PIC16f84A PIC16f628A

You might also like