Sony DCR Hc40

DCR-HC40/HC40E
RMT-831
SERVICE MANUAL
Ver 1.0 2004. 01
Revision History How to use Acrobat Reader
LEVEL
US Model Canadian Model Brazilian Model Korea Model Japanese Model

DCR-HC40
AEP Model UK Model East European Model North European Model Australian Model Chinese Model
DCR-HC40E
Photo : DCR-HC40E
Z MECHANISM (MDX-Z200)
E Model Hong Kong Model Tourist Model

DCR-HC40/HC40E
Link
SPECIFICATIONS SERVICE NOTE DISASSEMBLY BLOCK DIAGRAMS FRAME SCHEMATIC DIAGRAMS SCHEMATIC DIAGRAMS PRINTED WIRING BOARDS REPAIR PARTS LIST
For ADJUSTMENTS (SECTION 6), refer to SERVICE MANUAL, ADJ (987670351.pdf). For INSTRUCTION MANUAL, refer to SERVICE MANUAL, LEVEL 1 (987670341.pdf). (EXCEPT J MODEL) For MECHANISM ADJUSTMENTS, refer to the DV MECHANICAL ADJUSTMENT MANUAL Z MECHANISM (EXCEPT J: 9-876-210-11) (J: 9-876-210-01). Reference No. search on printed wiring boards is available. On the VC-352 board
This service manual provides the information that is premised the circuit board replacement service and not intended repair inside the VC-352 board. Therefore, schematic diagram, printed wiring board, waveforms, mounted parts location and electrical parts list of the VC-352 board are not shown. The following pages are not shown. Schematic diagram ............................. Pages 4-19 to 4-60 Mounted parts location ............................. Pages 4-83 to 4-84 Printed wiring board ............................ Pages 4-75 to 4-78 Electrical parts list ................................... Pages 5-17 to 5-25
DIGITAL VIDEO CAMERA RECORDER
DCR-HC40/HC40E
ENGLISH JAPANESE
SPECIFICATIONS
Video camera recorder

System
Video recording system 2 rotary heads, Helical scanning system Still image recording system Exif Ver. 2.2 *1
*1 Exif is a file format for still images, established by the JEITA (Japan Electronics and Information Technology Industries Association). Files in this format can have additional information such as your camcorders setting information at the time of recording.
Minimum illumination 7 1x (lux) (F 1.8) 0 lx (lux) (during NightShot plus function)*

* Objects unable to be seen due to the dark can be shot with infrared lighting.
Input/Output connectors
Audio/Video input/output 10-pin connector Input/output auto switch Video signal: 1 Vp-p, 75 (ohms), unbalanced Luminance signal: 1 Vp-p, 75 (ohms), unbalanced DCR-HC40: Chrominance signal: 0.286 Vp-p, 75 (ohms), unbalanced DCR-HC40E: Chrominance signal: 0.3 Vp-p, 75 (ohms), unbalanced Audio signal: 327 mV (at output impedance more than 47 k (kilohms)), Input impedance more than 47 k (kilohms), Output impedance with less than 2.2 k (kilohms) DV input/output 4-pin connector LANC jack Stereo mini-minijack ( 2.5 mm) USB jack mini-B MIC jack Minijack, 0.388 mV low impedance with DC 2.5 to 3.0 V, output impedance 6.8 k (kilohms) ( 3.5 mm), Stereo type
Dimensions (approx.) 50 92 112 mm (2 3 5/8 4 1/2 in.) (w/h/d) Mass (approx.) 400 g (14 oz) main unit only 460 g (1 lb) including the NP-FP50 rechargeable battery pack and DVM60 cassette. Supplied accessories See page 5-12.
AC Adaptor AC-L25A/L25B
Power requirements AC 100 - 240 V, 50/60 Hz Current consumption 0.35 - 0.18 A Power consumption 18 W Output voltage DC 8.4 V, 1.5 A Operating temperature 0 C to 40 C (32 F to 104 F) Storage temperature -20 C to + 60 C (-4 F to + 140 F) Dimensions (approx.) 56 31 100 mm (2 1/4 1 1/4 4 in.) (w/h/d) excluding the projecting parts Mass (approx.) 190 g (6.7 oz) excluding the mains lead
Audio recording system Rotary heads, PCM system Quantization: 12 bits (Fs 32 kHz, stereo 1, stereo 2), 16 bits (Fs 48 kHz, stereo) Video signal DCR-HC40: NTSC color, EIA standards DCR-HC40E: PAL color, CCIR standards Usable cassette Mini DV cassette with the mark printed Tape speed SP: Approx. 18.81 mm/s LP: Approx. 12.56 mm/s Recording/playback time (using a DVM60 cassette) SP: 60 min LP: 90 min Fast forward/rewind time (using a DVM60 cassette) Approx. 2 min 40 sec. Viewfinder Electric viewfinder (color) Image device 3.6 mm (1/5 type) CCD (Charge Coupled Device) Gross: Approx. 1 070 000 pixels Effective (still): Approx. 1 000 000 pixels Effective (movie): Approx. 690 000 pixels Lens Carl Zeiss Vario-Tessar Combined power zoom lens Filter diameter: 25 mm (1 in.) 10 (Optical), 120 (Digital) F = 1.8 ~ 2.3 Focal length 3.2 - 32 mm (5/32 - 1 5/16 in.) When converted to a 35 mm still camera In CAMERA-TAPE: 46 - 460 mm (1 13/16 - 18 1/8 in.) In CAMERA-MEMORY: 38 - 380 mm (1 1/2 - 15 in.) Color temperature [AUTO], [ONE PUSH], [INDOOR] (3 200 K), [OUTDOOR] (5 800 K)
Rechargeable battery pack (NP-FP50)

Maximum output voltage DC 8.4 V Output voltage DC 7.2 V Capacity 4.9 Wh (680 mAh) Dimensions (approx.) 31.8 18.5 45.0 mm (1 5/16 3/4 1 13/16 in.) (w/h/d) Mass (approx.) 40 g (1.5 oz) Operating temperature 0 C to 40 C (32 F to 104 F) Type Lithium ion
LCD screen
Picture 6.2 cm (2.5 type) Total dot number 123 200 (560 220)
General
Power requirements DC 7.2 V (battery pack) DC 8.4 V (AC Adaptor) Average power consumption (when using the battery pack) DCR-HC40: During camera recording using the viewfinder 2.9 W During camera recording using the LCD 3.2 W DCR-HC40E: During camera recording using the viewfind 2.8 W During camera recording using the LCD 3.1 W Operating temperature 0 C to 40 C (32 F to 104 F) Storage temperature -20 C to + 60 C (-4 F to + 140 F)
Design and specifications are subject to change without notice.
DCR-HC40/HC40E
ENGLISH JAPANESE
DCR-HC40/HC40E
ENGLISH JAPANESE
SAFETY CHECK-OUT
After correcting the original service problem, perform the following safety checks before releasing the set to the customer. 1. Check the area of your repair for unsoldered or poorly-soldered connections. Check the entire board surface for solder splashes and bridges. Check the interboard wiring to ensure that no wires are "pinched" or contact high-wattage resistors. Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Point them out to the customer and recommend their replacement. Look for parts which, through functioning, show obvious signs of deterioration. Point them out to the customer and recommend their replacement. Check the B+ voltage to see it is at the values specified. Flexible Circuit Board Repairing Keep the temperature of the soldering iron around 270C during repairing. Do not touch the soldering iron on the same conductor of the circuit board (within 3 times). Be careful not to apply force on the conductor when soldering or unsoldering. Unleaded solder Boards requiring use of unleaded solder are printed with the leadfree mark (LF) indicating the solder contains no lead. (Caution: Some printed circuit boards may not come printed with the lead free mark due to their particular size.)
2. 3.
4.
5. 6.
: LEAD FREE MARK Unleaded solder has the following characteristics. Unleaded solder melts at a temperature about 40C higher than ordinary solder. Ordinary soldering irons can be used but the iron tip has to be applied to the solder joint for a slightly longer time. Soldering irons using a temperature regulator should be set to about 350C. Caution: The printed pattern (copper foil) may peel away if the heated tip is applied for too long, so be careful! Strong viscosity Unleaded solder is more viscous (sticky, less prone to flow) than ordinary solder so use caution not to let solder bridges occur such as on IC pins, etc. Usable with ordinary solder It is best to use only unleaded solder but unleaded solder may also be added to ordinary solder.
SAFETY-RELATED COMPONENT WARNING!! COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT LA SCURIT! LES COMPOSANTS IDENTIFS PAR UNE MARQUE 0 SUR LES DIAGRAMMES SCHMATIQUES ET LA LISTE DES PICES SONT CRITIQUES POUR LA SCURIT DE FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PISES SONY DONT LES NUMROS SONT DONNS DANS CE MANUEL OU DANS LES SUPPMENTS PUBLIS PAR SONY.
CAUTION : Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
DCR-HC40/HC40E
ENGLISH JAPANESE
DCR-HC40/HC40E
TABLE OF CONTENTS 1.
1-1. 1. 2. 3.
SERVICE NOTE
SERVICE NOTE 1-1 NOTE FOR REPAIR 1-1 POWER SUPPLY DURING REPAIRS 1-2 TO TAKE OUT A CASSETTE WHEN NOT EJECT (FORCE EJECT) 1-2
2.
DISASSEMBLY
2-1. DISASSEMBLY 2-1 2-2. SERVICE POSITION 2-3 2-3. CIRCUIT BOARDS LOCATION 2-6 2-4. FLEXIBLE BOARDS LOCATION 2-7 HELP (List of caution points is shown here.)
3.
3-1. 3-2. 3-3. 3-4. 3-5. 3-6.
BLOCK DIAGRAMS
OVERALL BLOCK DIAGRAM (1/4) 3-1 OVERALL BLOCK DIAGRAM (2/4) 3-3 OVERALL BLOCK DIAGRAM (3/4) 3-5 OVERALL BLOCK DIAGRAM (4/4) 3-7 POWER BLOCK DIAGRAM (1/3) 3-9 POWER BLOCK DIAGRAM (2/3) 3-11
4-3. PRINTED WIRING BOARDS CD-490 (CCD IMAGER) PRINTED WIRING BOARD 4-65 IR-051 (REMOTE COMMANDER RECEIVER, MIC IN) PRINTED WIRING BOARD 4-65 JK-260 (JACK) PRINTED WIRING BOARD 4-67 LB-095 (EVF RELAY) PRINTED WIRING BOARD 4-69 SE-141 (PITCH/YAW SENSOR AMP) PRINTED WIRING BOARD 4-69 PD-213 (LCD RGB DRIVE, BACKLIGHT) PRINTED WIRING BOARD 4-71 MS-200 (MS CONNECTOR, INDICATOR) PRINTED WIRING BOARD 4-73 Printed wiring board of the VC-352 board is not shown. Pages from 4-75 to 4-78 are not shown. FP-228/467/826 FLEXIBLE BOARD (S/T REEL SENSOR, TAPE SENSOR) 4-79 4-4. MOUNTED PARTS LOCATION 4-81 Mounted parts location of the VC-352 board is not shown. Pages from 4-83 to 4-84 are not shown.
4.
PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS
4-1. FRAME SCHEMATIC DIAGRAM (1/2) 4-1 FRAME SCHEMATIC DIAGRAM (2/2) 4-3 4-2. SCHEMATIC DIAGRAMS CD-490 (CCD IMAGER) SCHEMATIC DIAGRAM 4-7 PD-213 (LCD RGB DRIVE, BACKLIGHT) SCHEMATIC DIAGRAM 4-9 CONTROL KEY BLOCK (SB6300) SCHEMATIC DIAGRAM 4-9 LB-095 (EVF RELAY) SCHEMATIC DIAGRAM 4-11 SE-141 (PITCH/YAW SENSOR AMP) SCHEMATIC DIAGRAM 4-12 JK-260 (JACK) SCHEMATIC DIAGRAM 4-13 FP-830 FLEXIBLE (BAT/DC IN) SCHEMATIC DIAGRAM 4-14 IR-051 (REMOTE COMMANDER RECEIVER, MIC IN) SCHEMATIC DIAGRAM 4-15 MS-200 (MS CONNECTOR, INDICATOR) SCHEMATIC DIAGRAM 4-15 CONTROL KEY BLOCK (SS6300, CF6300) SCHEMATIC DIAGRAM 4-17 FP-836 (PANEL REVERSE) SCHEMATIC DIAGRAM 4-18 Shematic diagram of the VC-352 board is not shown. Pages from 4-19 to 4-60 are not shown. FP-467/228/826 FLEXIBLE (S/T REEL SENSOR, TAPE SENSOR) SCHEMATIC DIAGRAM 4-61
5.
REPAIR PARTS LIST
5-1. EXPLODED VIEWS 5-3 5-1-1. OVERALL SECTION 5-3 5-1-2. CABINET (R) SECTION 5-4 5-1-3. LCD SECTION 5-5 5-1-4. BAT. EVF SECTION 5-6 5-1-5. LENS SECTION 5-7 5-1-6. CABINET (L) SECTION 5-8 5-1-7. OVERALL (MECHANISM DECK-Z200) 5-9 5-1-8. LS CHASSIS BLOCK ASSEMBLY 5-10 5-1-9. MECHANICAL CHASSIS BLOCK ASSEMBLY 5-11 5-2. ELECTRICAL PARTS LIST 5-14
Electrical parts list of the VC-352 board is not shown.

Pages from 5-17 to 5-25 are not shown.
DCR-HC40/HC40E SECTION 1 SERVICE NOTE

1-1. SERVICE NOTE
1. NOTE FOR REPAIR
When remove a connector, don't pull at wire of connector. Be in danger of the snapping of a wire.
ENGLISH
JAPANESE
Make sure that the flat cable and flexible board are not cracked of bent at the terminal. Do not insert the cable insufficiently nor crookedly.
When installing a connector, don't press down at wire of connector. Be in danger of the snapping of a wire.
Cut and remove the part of gilt which comes off at the point. (Take care that there are some pieces of gilt left inside)
1-1
DCR-HC40/HC40E
ENGLISH
2. POWER SUPPLY DURING REPAIRS
JAPANESE
In this unit, about 10 seconds after power is supplied to the battery terminal using the regulated power supply (8.4V), the power is shut off so that the unit cannot operate. This following two methods are available to prevent this. Take note of which to use during repairs. Method 1. Use the AC power adaptor. Method 2. Connect the servicing remote commander RM-95 (J-6082-053-B) to the LANC jack, and set the commander switch to the ADJ side.
3.
1 2 3 4 5 6 7 8
TO TAKE OUT A CASSETTE WHEN NOT EJECT (FORCE EJECT)

Remove the cabinet (R) section. Remove the front panel block assembly. Remove the BAT, EVF block assembly. Remove the lens block assembly. Remove the mechanism deck and the VC-352 board. Open the VC-352 board. Disconnect CN9102 (27P, 0.3mm) of VC-352 board. Supply +4.5V from the DC power supply to the loading motor and unload with pressing the cassette compartment.
Loading motor Disconnect the flexible board from CN9102 of VC-352 board.
CN9102
DC power supply (+4.5Vdc)
VC
-35
2
VC-352 board
1-2
DCR-HC40/HC40E SECTION 1 SERVICE NOTE

ENGLISH JAPANESE
1-3
DCR-HC40/HC40E
ENGLISH JAPANESE
CN9102
VC
-35
1-4E
DCR-HC40/HC40E
2. DISASSEMBLY
Link
DISASSEMBLY SERVICE POSITION CIRCUIT BOARDS LOCATION FLEXIBLE BOARDS LOCATION
HELP
DCR-HC40/HC40E
2. DISASSEMBLY
The following flow chart shows the disassembly procedure.
2-1. DISASSEMBLY
1 Shoe (G) cover 3
5 3 3 VC 4 -35 2 VC 5 -35 2 9 4
76 2 1 2 8 1 Two tapping screws (M1.7x6) black 2 Hinge blind 3 LCD section 4 Cabinet (R) section
2 2 1 1 1 Two screws (M1.7x3) silver 2 Five tapping screws (M1.7x4) black 3 Screw (M1.7x3) silver 4 Open the G cabinet (64) assembly. 5 Two claws 1 Three screws (M1.7x3) silver 2 FFC-036 flexible flat cable (16P) 3 Claw 4 F panel block assembly 5 Cushion (F3) 6 CF6300 control key block (8P) 7 FP-836 flexible board (6P) 8 FP-835 flexible board (22P) 9 Cabinet (R) section 4
1 2 qa 7 0 HELP 01 5 3
3 1
9 1 Tapping screw (M1.7x5) black 2 EYE cup assembly 1 1 2 HELP 02 (disassembly of the EVF section) 2 V 3 1 Screw (M1.7x4) black 2 Screw (M1.7x2.5) black 3 Screw (M1.7x4) black 4 Two tapes (A) 5 FP-830 flexible board (26P) 1 2 6 3 4 7 5 5 1 7 5 3 6 3 2 HELP 03 4 4 1 Open the G cabinet (64) assembly. 2 Screw (M1.7x2.5) black 3 Eject knob 4 Six tapping screws (M1.7x4) silver 5 Two screws (M1.7x2.5) black 6 FP-832 flexible board 7 G cabinet (64) assembly, MS board, FP-832 flexible board 1 FP-833 flexible board (39P) 2 Drum sheet 3 FP-832 flexible board (20P) 4 SS6300 control key block (18P) 5 Screw (M1.7x2.5) black 6 Two screws (M1.7x2.5) black 7 Open the G cabinet (64) assembly. 8 VC-352 board, Mechanism deck, MD frame assembly FFC-036 flexible board 1 2 1 Two tapes (W) 2 From lens flexible board (29P) 3 FP-833 flexible board (6P) 4 FP-828 flexible board (33P) 5 Two screws (M1.7x2.5) black 6 Lens block assembly 5 3 09 8 VC -35 2 VC 35 2 8 VC -3 52 6 qs qa 7 6 4 35 C2 3 1 6 7 6 4 5 6 FP-831 flexible board (20P) 7 FP-834 flexible board (10P) 8 BAT, EVF block assembly 1 Screw (M1.7x3) silver 2 BAT section 3 EVF section 1 Two screws (M1.7x3) silver 2 Two tapping screws (M1.7x5) black 3 P cabinet (C) assembly 4 Tape (A) 5 FP-835 flexible board (22P) 6 Hinge section 8 qs 5 8 4 3 4 1 Screw (M1.7 2.5) black 2 Four claws 3 Hinge cover (M), FP-836 flexible board 4 Hinge cover (C) 5 FP-835 flexible board, Hinge section 2
2 1 Two screws (M1.7x3) silver 2 Two tapping screws (M1.7x5) black 3 P cabinet (C) assembly
7 SB6300 control key block (6P) 8 Tapping screw (M1.7x5) black 9 Two claws 0 Panel cushion qa P cabinet (M) assembly qs PD-213 board, LCD unit (ACX528AKP-J), Light guide plate block
2 1 1 Two tapes (W) qd 2 Screw (M1.7x2.5) black 3 From lens flexible board (29P) 4 SS6300 control key block (18P) 5 Drum sheet 6 to qs (CN1205 (20P), CN1208 (39P), CN5001 (33P), CN9102 (27P), CN9103 (27P), CN9101 (10P), CN6501 (10P)) of VC-352 board qd VC-352 board
2-1
2-2
DCR-HC40/HC40E
2. DISASSEMBLY
2-2. SERVICE POSITION
[SERVICE POSITION TO CHECK THE VTR SECTION] Connection to Check the VTR Section To check the VTR section, set the VTR to the "Forced VTR power ON" mode. Operate the VTR functions using the touch panel. (When the control key block (SS6300) is removed, the function buttons of the adjustment remote commander are not effective even if the HOLD switch of the adjustment remote commander is set to the OFF position.)
6
7 5 1
Setting the "Forced VTR Power ON" mode 1) Select page: 0, address: 01, and set data: 01. 2) Select page: 0, address: 10, and set data: 00. 3) Select page: A, address: 10, set data: 02, and press the PAUSE button of the adjustment remote commander.
Exiting the "Forced VTR Power ON" mode 1) Select page: 0, address: 01, and set data: 01. 2) Select page: 0, address: 10, and set data: 00. 3) Select page: A, address: 10, set data: 00, and press the PAUSE button of the adjustment remote commander. 4) Select page: 0, address: 01, and set data: 00.
5 3 -35 2 4
3 2
Mechanism deck
VC 4
1 2 3
VC-352 board CN9103 LANC

JK
Adjustment remote commander (RM-95)
2 1 7 5
CN1206 FP-835 Flexible board (22P) CN9102
-26
JK-260 board CN9101 CN6501 CN1208 FP-833 Flexible board (39P) CN1207 SS6300 Control key block (18P) CN2101 CN1201
2 5 -3 C V
6 VC 3 5 VC 2 -35 76 9 -35 2 8
8 3 VC 35 2 6
Cabinet (R) section
BAT section To eject a cassette, connect the control key block (SS6300)
4 5 1 1 8 1 2 2
8 1
CPC-15 (J-6082-564-A)
2 VC -35 2 3
FP-830 Flexible board (26P)

3
6 4 5
DC-IN
I/F unit for LANC control (J-6082-521-A) AC power adaptor
AC IN
2-3
2-4
DCR-HC40/HC40E
2. DISASSEMBLY
[PD-213 BOARD SERVICE POSITION]
3 1
LANC
Adjustment remote commander (RM-95)
PD-213 board
P D -2 13
AC power adaptor
AC IN
2-5
DCR-HC40/HC40E
2. DISASSEMBLY
2-3. CIRCUIT BOARDS LOCATION
LB-095 SE-141 CD-490 JK-260
MS-200 VC-352
IR-051
PD-213
NAME CD-490 IR-051 JK-260 LB-095 MS-200 PD-213 SE-141
FUNCTION CCD IMAGER REMOTE COMMANDER RECEIVER, MIC IN JACK EVF RELAY MS CONNECTOR, INDICATOR LCD RGB DRIVE, BACKLIGHT PITCH/YAW SENSOR AMP TIMING GENERATOR, S/H, AGC, A/D CONV., LENS DRIVE, CAMERA PROCESS, MPEG MOVIE/DIGITAL STILL PROCESS, 64Mbit SDRAM, BUFFER, HI/DIGITAL STILL CONTROL, 32Mbit FLASH, 16Mbit SDRAM, DV SIGNAL PROCESS, DV INTERFACE, REC/PB AMP, VIDEO I/O, DRUM/CAPSTAN/LOADING DRIVE,CAMERA/MECHA CONTROL, HI CONTROL, EVF VIDEO, AUDIO I/O, MIC AMP, DC IN, CHARGE, DC/DC CONVERTER, CONNECTOR
VC-352
2-6
DCR-HC40/HC40E
2. DISASSEMBLY
2-4. FLEXIBLE BOARDS LOCATION
The flexible boards contained in the lens block is not shown.
FP-831 FP-834 FP-828
CONTROL KEY BLOCK (CF6300)
FP-836
FFC-036
CONTROL KEY BLOCK (SB6300)
CONTROL KEY BLOCK (SS6300)
FP-832
FP-830
FP-835
FP-833
2-7E
DCR-HC40/HC40E
HELP
Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown.
HELP 01 (disassembly of the Hinge section)
1 Peel off the adhesive surface.
Adhesive surface
3 Hinge (63) assembly 2 Unwind the FP-835 flexible board wide open.
4 FP-835 flexible board
HELP
DCR-HC40/HC40E
HELP 02 (disassembly of the EVF section)
2 Three screws 3 Slide the VF cabinet upper assembly, (M1.7 3) etc, direction of the arrow. silver
FP-831 flexible board
VF flexible fixed sheet
FP-831 flexible board

1 VF flexible fixed sheet
Remove the VF cabinet upper assembly in the direction of the arrow.

4 Tapping screw (M1.7 5), block
Illuminator, Prism sheet and other parts
HELP 03
Eject knob
CS frame assembly
Screw (M1.7 2.5) silver
HELP
DCR-HC40/HC40E
3. BLOCK DIAGRAMS
Link
OVERALL BLOCK DIAGRAM (1/4) OVERALL BLOCK DIAGRAM (2/4) OVERALL BLOCK DIAGRAM (3/4) OVERALL BLOCK DIAGRAM (4/4) POWER BLOCK DIAGRAM (1/2) POWER BLOCK DIAGRAM (2/2)
DCR-HC40/HC40E SECTION 3 BLOCK DIAGRAMS

3-1. OVERALL BLOCK DIAGRAM (1/4)
CD-490 BOARD
LENS ASSY
3. BLOCK DIAGRAMS
( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.
VC-352 BOARD(1/4)
(3/21) (1/21) (4/21)
241
FP-828 (FLEXIBLE)
JK-260 BOARD(2/4) IC5201

CAMERA PROCESS 122 115 SPCK VCK
IRIS (SHUTTER)
IC6201
20 268 269 270 271 279
(8/21)
LCK0 VCK 143 119 162 RYO0-RYO3,DEHD,DEVD.DEFLD.SGOUT 120 163 70 121 RCO0-RCO3,EDHD,EDVD.EDFLD.FRMREF 71 122 13 72 RYI0-RYI3,DE0-DE3 14 73 123 166 RCI0-RCI3,DE4-DE7 275 276 284 168 HY1 PLL 27IN FRRV TRRT TRRV HY1 PLL 27IN ADATAIN0 ADATAIN1 ADATAOUT0 ADATAOUT1 SFD BCK DSCK VM 124 125 12 168 127 167 126 EVF R EVF G EVF B 21 15 54 152 55 190 155 107 189 153 109 192 SWP FRRV TRRT TRRV MC BUS 45 41 139 REC DT REC CK RF IN
(9/21)
LCK0 149 186 150 187 104 TRCK0 47 29 37 LBUS0-LBUS3 45 | 42 DV INTERFACE 79
IC201
CCD IMAGER 4-11416 18 V1-V4 RG,H1,H2 7-4 26-29 CN5001 24 21 22 5 7 8 12 11
IC202
S/H 13 14 1
5 4
CCD OUT +,-
15 15 16 14 CN5001 IC1701 Y OUT
30 31
IC5003
AGC A/D CONV.
IC6401
DV SIGNAL PROCESS RF SIGNAL PROCESS
47 48 1 12 AD0-AD13 AD0-AD13
IC6301
9 | 6
TPA NTPA TPB NTPB
CN1208 8 7 6 5 19 20 22 23
CN704
CN703
DV
56 | 71
CN201
208 | 199
216 IFI Y0-Y7 | 223
34
XSHD,XSHP,CLPDM CN201 19 18 13 11 12 18 CN5001 CLPOB 38 33 64 9 10 HD,VD,FLD IC7101 Y OUT HD,VD,FLD 92 91 90 CHCK 53 59 ADCK27 22 23 5 2 1 CAM SO,SI,SCK EXT STROBO 20 102 A0-A13 161 144 D0-D15 195 174 ZOOM RST CHCK 137 EN1 DIR1A DIR1B DV SIGNAL PROCESS 77 11 12 13 IFI HD IFI VD IFI OE 228 229 230 CH SO,SCK 20 16 44 45 9 | 6 IFI C0-C3 224 | 227 MPEG MOVIE PROCESS
CN201
280 281 282 264 265 266 267 272 273
FP-833 (FLEXIBLE)(2/4)
REC DT REC CK RF IN
X5001 66MHz : HC40 54MHz : HC40E
47
(1/21)
12
MC BUS TO OVERALL BLOCK DIAGRAM (3/4)
IC5001
67 73 32 17 25 TIMING GENERATOR
248 250 251 238
60 58 112 111 114 157 3
SWP FRRV TRRT TRRV
(PAGE 3-5)
86 169
SPCK
SPCK 139 47 46 185
VSP SO,SI,SCK
VSP SO,SI,SCK
A0-A10, A12
M H H
ND FILTER METER
23 22 21 25
IRIS DRIVE +,-
H1 J1 IRIS DRIVE
A0-A13
| 170
52 95 96 EVF HD EVF VD PANEL R PANEL G PANEL B VD SO,SCK PANEL HD PANEL VD DO-D15
VD SO,SCK
IRIS HALL +,-
C5 B6
J11 K11 H12
215 D0-D15 | 198
40 39 45 92 93
EVF R EVF G EVF B
EVF HD EVF VD PANEL R PANEL G PANEL B
17 15
ND HALL +,-
(2/21)
C10 B11 ND FILTER DRIVE
IC5101
20 29
26 35
2 42
13 53
TO OVERALL BLOCK DIAGRAM (2/4)
M MR
FOCUS MOTOR
12 13 2 1
ND DRIVE +,-
(PAGE 3-3)
PANEL HD PANEL VD
K2 L2 B1 C4 FOCUS MOTOR DRIVE K12 SPCK (IC6201) IC7101 C OUT
IC6202
64Mbit SDRAM
FMR A,B
(5/21)
252 AD4-AD13 IC7101 C OUT ADCK27 | 261 33 245 158 CAM SO,SI,SCK 156 9 53 USB I/F 60 IC6201 Y OUT IC6201 C OUT 46 7 10 VIDEO A/D CONV.
M M
10 11
FOCUS +,-
F3 E3 K6 L4 F1 G3
6 9
ZOOM A,XA,B,XB
ZOOM MOTOR DRIVE EN1 DIR1A DIR1B
ZOOM MOTOR ZOOM RESET SENSOR 26 ZOOM RST
K9 L9 M9 J9
USB D+,D-
28 DO-D15 29 24
(11/21)
IC7101
VIDEO IN/OUT AGC ACC
Y 18 C 14 22 39 48 V Y C V
ZOOM RST
IC7101 C OUT
(7/21)
X8401 48MHz
34
18 NIGHT SHOT
XNS SW CN5101
IC8403
XTAL OSC
USB CLK ADATAIN0 301 ADATAIN1 302 IC7101 Y OUT 36 ADATAOUT0 298 ADATAOUT1
42
187 54
(13/21)
IC8801
CAMERA CONTROL 77 78 75 73 71 CH SO,SCK CAM SO,SI,SCK
(6/21)
185 USB D+,D186 MS BS MS DIO MS SCLK MS BS,DIO,SCLK
299 AUDIO SIGNAL PROCESS USB CLK 177 82 89 87 DIGITAL STILL PROCESS 151 152 150 VSP SO,SI,SCK SFD BCK DATA FROM SFD DATA TO SFD
IC8401
DIGITAL STILL CONTROL 122 DSCK VM 119
FP-833 (FLEXIBLE)(3/4) JK-260 BOARD(3/4)

S.Y I/O S.C I/O 19 18 7 9 10 5
SE-141 BOARD
SE402 YAW SENSOR SE401 PITCH SENSOR 8 12
X8801 20MHz
1 3
85 81 78
A1-A22 291 1 304 12
D0-D15 16 35
A1-A19 116 98 121
D0-D15 137
IC401
YAW/PITCH SENSOR AMP
18
37
YAW AD
130
135 38 35 L DATA FROM SFD 2 4 D/A CONV. A/D CONV. R VIDEO I/O AUDIO L I/O AUDIO R I/O CN1208 57 AUDIO I/O EXT STROBO ZOOM VR AD 20 29 26 35 2 42 13 53 25 10 16, 13 1 48 29 38 36 45 MIC L MIC R MIC L MIC R 62 17 16 L R SP+ SPSP+ SP11 16 14 16 11 13 CN704 9 1 6
2 CN401
PITCH AD 5 35 CN1208
129
A1-A22 26 27 34
CN701 AV IN/OUT
(16/21)
D0-D15
DATA TO SFD SFD BCK
IC7601
CN704 CN702 USB D+,D25 26 (USB) 3 2 CN1208
(PAGE 3-8)
4
71 77
IC8502
USB D+,D16Mbit SDRAM
IC8503
32Mbit FLASH MEMORY
(PAGE 3-3)
(7/21)
(7/21)
JK-260 BOARD(1/4) MS-200 BOARD(1/3)

CN503
MEMORY STICK Duo CONNECTOR
CN1205 6 12 11 8 MS BS,DIO,SCLK
MS BS,DIO,SCLK CN501
5 3
16
AUDIO SIGNAL VIDEO SIGNAL VIDEO/AUDIO SIGNAL
3-1
3-2
DCR-HC40/HC40E
3. BLOCK DIAGRAMS
VC-352 BOARD(2/4)
FP-835 (FLEXIBLE) (1/2)

CN1206 PANEL R,G B 1 2 3 1 2 3
PD-213 BOARD(1/2)
CN601 34 33 32
IC602
RGB DRIVE
20 VR,VG,VB 21 22 26 COM COM CS
4 5 3 24 23 22 19 14 2 CN605
LCD901(1/2) 2.5 INCH COLOR LCD UNIT
45 42 44 HD VD 12 13 22 19 21 12 13 22 19 21 48 1
17 TIMING GENERATOR 5
TO OVER ALL BLOCK DIAGRAM (3/4)
18 BL ON
31 EXTDA
VD,SO,SI,SCK
BACK LIGHT
CN606 1 BL -15.5V 3 BL H BL L
(PAGE 3-5)
PANEL R PANEL G PANEL B PANEL HD PANEL VD EVF R EVF G EVF B
IC601
Q604-607
BACK LIGHT DRIVE
EVF R,G,B
34 33 32
(15/21)
CN9301 20 21 22
26 24
28 17 16 14 12 10 6
FP-831 (FLEXIBLE)
15 14 13 17 16 12 6 7 8 4 5 9 18
LB-095 BOARD
R,G,B 17 18 16 21 19 20 15 5 CN302
LCD902 COLOR EVF UNIT
AUDIO SIGNAL VIDEO SIGNAL
IC9301
RGB DRIVE
COM PSIG EN, VST, REF, PCG, VCK, XSTBY,BLK,HCK1/2, HST
(PAGE 3-2)
EVF HD EVF VD
45 42 44 EVF HD EVF VD 48 1
10
TIMING GENERATOR
18 (15/21) BL ON
31 EXTDA
20
1 CN301
D303 BACK LIGHT
IC9302
Q9303 SP+ SP-
BACKLIGHT DRIVE
18 19 CN1205
12 13
SP+, SPCN501 CN502
1 2
SP901 SPEAKER
IR-051 BOARD (1/2) FFC-036 (FLAT CABLE) (1/2)

CN601 MIC901
MIC L MIC R
(PAGE 3-2)
MIC L MIC R
MS-200 BOARD (2/3)
CN602 3
CN1204 14
(17/21)
35
IC7701
MIC AMP 22 14 36 48
MIC L MIC R CN1203 SHOE MIC L SHOE MIC L
16 R
1 3 L 33
J601 MIC (PLUG IN POWER)
12 14
5 3
INTELLIGENT ACCESSORY SHOE (1/2)
16
3-3
3-4
DCR-HC40/HC40E
3. BLOCK DIAGRAMS
CN1207 CPC FOR ADJUSTMENTS 2 1 RF MON
Z MECHA DECK (MDX-Z200)

(10/21)
REC CK REC DT 44 46
VC-352 BOARD(3/4)
REC CK REC DT
SWP
IC6501
10 REC/PB AMP 9 4 3
CN6501 ODD 5 6 DRUM EVEN 3 2
RF IN
RF IN RF MON RF SWP SWP
35 30 39 38
SWP
(PAGE 3-2)
MC BUS 172 164 35 38 SPCK VSP SO, SCK
(12/21)
(13/21)
SWP, FRRV, TRRT, TRRV
36
IC9101
(1/2) CN9103 FG 1,2 7 8 M903 CAPSTAN FG AMP 22 25 20 | 17 CAPSTAN MOTOR DRIVE 74 76 78 CAP U,V,W 4 | 1 11 | 14 CN9101 M901 6 | 1 CAPSTAN FG
IC8801
52 | 45 33 32 FRRV TRRT TRRV 23 MECHA CONTROL
190 165 166
CAP FG CAP ON,CAP FWD
80 1
(12/21)
89 CAP PWM 41
CAPSTAN MOTOR
Q2305 43 CAP ERROR 24
(19/21)
75
CAP VS SWITCHING
75 77
178 179 69
IC9101
LPF (2/2)
IC2301
45 DRUM ERROR 21 PWM DRIVE 77 Q2306 DRUM VS SWITCHING 64 67 DRUM MOTOR DRIVE 63 65 68 DRUM U,V,W
VSP SO,SI,SCK
VSP SO,SI,SCK
70 67 88 DRUM PWM 44 LPF 82
DRUM MOTOR
VD SO, SCK
83 80 10 DRUM FG
DRUM PG
VD SO, SI, SCK
197
DRUM FG
53
DRUM FG AMP
52
(PAGE 3-3)
198 DRUM PG 50 DRUM PG AMP 49 CN9102 1 15 13 TREEL FG SREEL FG LOAD,UNLOAD 32 33 LOADING MOTOR DRIVE 69 72 LM +, | 4 M902 LOADING MOTOR
(13/21)
IC8802
EEPROM 5 2 6
M
DEW SENSOR
192 6 CN1207 CPC 7 FOR ADJUSTMENTS 5 EEP SO, SI, SCK 86 87 84 1 31 193
29 25 REEL FG AMP
26 27 DEW AD 22 23 5
TAPE END
21
TAPE END DETECT
20
T REEL +,
26 25
T REEL SENSOR
H902
3 X8801 20MHz 66 HI SO,SI,SCK 65 63
30
TAPE TOP
19
TAPE TOP DETECT
18
S REEL +,
22 23
S REEL SENSOR
H901
119
DEW AD 20
Q901 TAPE END SENSOR
REC PROOF CHIME SDA,CHIME SCK,CHIME VDD XCC DOWN
180
TAPE LED ON Q902 TAPE TOP SENSOR 11
(PAGE 3-8)
Q8801 XLOGO LED LED DRIVE 98
106 | 108
MODE SW A - MODE SW C 18
D901 TAPE LED
REC PROOF 12 13 | 15 XCC DOWN 17 C. C. DOWN 7 MODE | 9 S902 SWITCH S903 4PIN CONNECTOR MIC902
16
DIGITAL VIDEO/AUDIO SIGNAL
3-5
3-6
DCR-HC40/HC40E
3. BLOCK DIAGRAMS
VC-352 BOARD(4/4)
(6/21)
S001-003 REC STRAT/STOP SW PHOTO REC SW PHOTO FREEZE SW RV001 S004 OPEN/EJECT SW D004 (CHG) D003 (PLAY/EDIT) D002 (CAMERA MEMORY) D001 (CAMERA TAPE) POWER SW 18 10 9 8 4 7 17 . 16 2 4 9 . 12 . 11 . 10 1 . 2 XEJECT SW XCHARGE LED XVTR LED XMEM LED XCAM LED XPOWER SW XMODE SW XCC DOWN SI 5 23 . 24 . 25 52 51 29 28 X8202 32.768KHz 131 CAM DD ON X8201 10MHz 3 Q8403 TOUCH PANEL I/F 4 137 . 138 . 249 . 250 TP X TP Y TP SEL1 TP SEL2 EEP TXD 103 . EEP RXD 104 . EEP SCK 105 Q8408 LED DRIVE T/W VR 4 . 14 CN1201 KEY AD0
XCC DOWN XLOGO LED
IC8401
HI CONTROL 273 XSHUTTER OPEN 139 KEY AD0 254 IR ON REC PROOF 234 CHIME SDA 246 . CHIME SCK 247 . CHIME AD0 134 . CHIME AD1 135 . CHIME AD2 136 REC PROOF
287 MS LED ON
CHIME SDA CHIME SCK CHIME VDD
6 OVERALL BLOCK DIAGRAM(3/4)

(PAGE 3-5)
TO
(14/21)
SO SCK X 0A X 1A X TAL X TAL
TXC, RXD, SCK
93 . 94 . 95
TXD RXD SCK HI SO HI SI XHI SCK 97 . . 98 . . 99
IC8201
HI CONTROL
HI SO,SI,SCK
MS-200 BOARD (3/3)

D501 (ACCESS) LI 3V BT501 LITHIUM BATTERY (SECONDARY) S501 RESET 8 10 11 CN501
FP-832
(FLEXIBLE) (3/3)
14 16 17 73 XRESET CN1205 MS LED ON
5 . 2 . 6
(7/21)
IC8402
EEPROM
140 KEY AD1 . 142 KEY AD3 . 143 KEY AD4
IR-051 BOARD (2/2)

D602 (TALLY) D601 (NIGHT SHOT LED) 15
FFC-036
(FLAT CABLE) (2/2)
2 Q1201, 1202 5 12 LED DRIVE IR ON 45 41 XSHUTTER OPEN CN1204 BATT SIG SIRCS PWM SIRCS SIG 3 7 CN602 10 Q8201 I/F 42 . 43 35 57 77 37 IB SO IB SI S003 VTR DD ON SHOE ON BATT/XEXT FAST CHARGE EASY MODE LED 17 XBATT INFO SW 6 Q8202 LED DRIVE CN1202 6 D002 (EASY) 2 DSPL/BATT INFO SW 8 XLOGO LED KEY AD3 S004, S002, S001 EASY SW BACK LIGHT SW PANEL OPEN/CLOSE SW D001 (ILLMINATION) 16 F TALLY LED ZOOM VR AD EXT STROBO TO
1 OVERALL BLOCK DIAGRAM(1/4)

(PAGE 3-1)
IC601
REMOTE COMMANDER RECEIVER 4 S601 LENS COVER OPEN/CLOSE
CONTROL KEY BLOCK(CF6300)
LANC SIG 57 LANC I/O
56 . 54
LANC OUT LANC IN
FP-835
40 . 39 LANC OUT LANC IN 18 . 16 . 17 TPX TPY TP SEL1 18 . 16 . 17
(FLEXIBLE) (2/2)
PD-213 BOARD(2/2)
Q601, Q602 TOUCH PANEL I/F 4
LI 3V
RESET 45
51 48
XRESET VOUT 14 . 53 . 62 EVER 3.0V VCC
TP L TP R TP TOP TP BOT
2 . 5 . 4 . 1
LCD901(2/2) TOUCH PANEL
49
3V REG
47
CN603
(19/21)
VTR DD ON SHOE ON BATT/XEXT FAST CHARGE 44
14 . 15
HI EVER SO,SCK
20 HI EVER SO . 21 HI EVER SCK
SHOE ID2 SHOE ID1
55 . 54 6 CN1206 KEY AD1 6 CN601 CN602 3 . 4
CONTROL KEY BLOCK(SB6300)

S001, S002 REC START/STOP SW LCD BACKLIGHT SW
IC2301
DC/DC CONVERTER RESET LANC I/O
A 1.2V D 1.2V USB 3.1V MT 5V A 1.5V D 1.5V NS 2.8V RP 2.8V A 2.8V D 2.8V AU 2.8V CN1212 1 . 2
FP-830
(FLEXIBLE)
2 7 BT901 BATTERY TERMINAL
BATT SIG CN2101
FP-836 BOARD
S101 KEY AD4 PANEL REVERSE SW
1 9
EP 2.8V 14 Q2101, Q2102 D 1.9V CAM 3.1V A 4.6V AU 4.6V EP 4.6V RP 4.6V EP 8.5V 13.5V BL -15.5V 5 CAM 15V CAM -7.5V CAM DD ON 22 26 J901 DC IN 20 15 Q2105,Q2106 SHOE UNREG 16 CN1203 BATT UNREG VTR UNREG SHOE UNREG 7 . 6 24 CN1208
FP-833 (FLEXIBLE)
(4/4)
LANC SIG 2
JK-260 BOARD (4/4)

CN704
J701 LANC
FP-834 (FLEXIBLE)
(2/2)
EXT STROBO 4
SHOE ID1,2
6 . 5
8 9 . 10
LANC SIG SHOE UNREG
INTELLIGENT ACCESSORY SHOE
7 8
(2/2)
16
3-7
3-8
DCR-HC40/HC40E
3. BLOCK DIAGRAMS
3-5. POWER BLOCK DIAGRAM (1/2)
FP-830 (FLEXIBLE)
BT901 BATTERY TERMINAL 2 BATT UNREG 7
VC-352 BOARD (1/2)

CN2101 F004 BATT UNREG
1 9 14
BATT SIG
Q2101, 2102
Q2103, 2104 CHARGE SWITCH F001
MT/15.5/BL REG UNREG
J901 DC IN 22 26 16 20 15 BATT/XEXT
FAST CHARGE
F002 C/D UNREG ACV UNREG LF2101 F003

INIT CHARGE ON
VTR UNREG Q2105,2106
F005
(19/21)
IC2301
DC/DC CONVERTER RESET,LANC I/O SHOE ON VCC01 63 VCC02 69 Q2301 SWITCHING L2306 L2310 L2309 61
D2301
NS 2.8V D2305 RECT LANC DC
CN1203
INTELLIGENT ACCESSORY SHOE
D 1.5V A 1.5V L2325 L2326 A 1.2V D 1.2V A 1.2V D 1.2V VTR UNREG AU 4.6V
8
10 FP-834 (FLEXIBLE)
SHOE UNREG
VCC1 OUT1-1 64
Q2313,Q2314 1.2V REG
49 47
3V REG
OUT1-2 66 IN1 12 Q2303 SWITCHING
Q2308
CN1205
BT501 LITHIUM BATTERY (SECONDARY) LI 3V 10 16
46
D2302
L2307 L2312
MT 5V NS 2.8V PR 2.8V A 2.8V D 2.8V AU 2.8V EP 2.8V
AU 2.8V RP 4.6V RP 2.8V A 2.8V A 1.5V D 1.5V
45
BATTERY IN DETECT
L2314 OUT2 68 IN2 11 L2315 L2316 Q2302 SWITCHING L2308 L2317 L2318
65
BATT SENS ACV SENS
MS-200 BOARD (1/2)

S501 RESET 11
(14/21)
14 VCC 53 62 XRESET BATT IN 73 31
VOUT
48
66
IC8201
HI CONTROL SHOE ON BATT/XEXT INIT CHARGE ON FAST CHARGE IB SO IB SI
51 50
RESET
USB 3.1V
1
TO POWER BLOCK DIAGRAM (2/2)
57 77 38 XRESET 17 BATT SIG 37 Q8201 I/F 42 43
HI EVER SO HI EVER SCK XCS DD
20 21 67
14 15 13
DIN CLK LD
D 1.9V OUT3-1 70 OUT3-2 72 Q2320,Q2321 Q2309 1.9V REG

1 5
D 1.9V
D 2.8V MT 5V
(19/21)
4
(PAGE 3-11)
VTR DD ON
35
44
CTL1
IN3 10 VR 41 Q2304 SWITCHING L2305 L2319 L2320 L2321 OUT4 73 L2322
CN501
USB 3.1V
IC2302
3.1V REG
A 4.6V CAP VS CAP ERROR
1 2
XPOWER SW XMODE SW
XLANC PWR ON
A 4.6V DRUM VS AU 4.6V EP 4.6V RP 4.6V DRUM ERROR CAM DD ON CAM 15V CAM -7.5V
LANC I/O
55 60
LANC DC POWER OFF ON VCC3 VOUT4
5.6V REG
IN4
9 5V Q2303 Q2305 SWITCHING L2302 CAP VS

1 5
58
EP 13.5V
VB 62 CN1201
XPOWER SW XMODE SW
(19/21)
MODE
17 16 OUT5 75 R1207
IC2303
3.1V REG
CAM 3.1V
CAM 3.1V
D004
CHG LED
11 R1206
EVER_3.0V 43
VREF RT
+INE5 24 Q2306 SWITCHING L2303
CAP ERROR DRUM VS
D001-003
MODE LED
D 2.8V
38
Q2313 RV001
T/W VR
OUT6 77 +INE6 21 DRUM ERROR Q2301 L2301 L2304 15V REG
13.5V REG
13.5V
LCD902 COLOR EVF UNIT
LB-095 BOARD
OUT7 79 CN302 2 D303 BACK LIGHT LED
L9302
CAM 15V
Q2311 Q2307 SWITCHING 8.5V REG EP 8.5V
CN301 20 1
CN9301
L9303
EP 8.5V EP 2.8V IN7 6 3 4 5 1 2
VCONT6 2 19 EP 4.6V VOUT6 REG6CTL VCONT5
-7.5V REG D2304 RECT
CAM -7.5V
(15/21)
(15/21)
VOUT5
IC9302
FP-831 (FLEXIBLE)
BACK LIGHT DRIVE
IC9301
RGB DRIVE TIMING GENERATOR 18
Q2315, 2316
CAM DD ON
8 9
EP 4.6V EP 8.5V EP 2.8V
2
7 LANC DC BL-15.5V 11 10 CN1206 NS 2.8V -15.5V
(PAGE 3-12)
BL ON
16
3-9
3-10
DCR-HC40/HC40E
3. BLOCK DIAGRAMS
3-6. POWER BLOCK DIAGRAM (2/2)
FFC-036 (FLAT CABLE)
IR-051 BOARD
CN602 16 D602 TALLY LED D601 EP 4.6V
VC-352 BOARD(2/2)
MT 5V R1224
CONTROL KEY BLOCK (CF6300)

D002 5 EASY LED D001 7 CN1202 ILLMINATION LED R1223
1 R1219, R1220 11 7 CN1204
NS 2.8V
FP-835 (FLEXIBLE)
PD-213 BOARD
L602
8
LCD901 2.5 INCH COLOR LCD UNIT

18
NS LED A A 4.6V
IC601
REMOTE COMMANDER RECEIVER
EP 8.5V EP 2.8V
L603
9 7
Q608, 609
CN605
6 10
NIGHT SHOT LED
FP-833 (FLEXIBLE)
(PAGE 3-10)
IC601
BACK LIGHT DRIVE 1 3 EXTDA 31
IC602
RGB DRIVE TIMING GENERATOR 18 ND901 BL 2.8V 6 BACK LIGHT 10
IC401
PITCH/YAW SENSOR AMP CN401 A 2.8V
SE401, 402 PITCH, YAW SENSOR
SE-141 BOARD
11
NS 2.8V
39
1 L401 NS 2.8V J701 LANC
BACK LIGHT DRIVE Q604-607
BL H
LANC DC
21 CN1208
LANC DC
CN704 5
JK-260 BOARD
L-15.5V
10
BL L 3 CN606
CN601
A 1.2V D2.8V D 1.2V 15 9
CN501
D501 ACCESS LED
(16/21)
VTR UNREG VTR UNREG Q7605 REG SP VCC
(17/21)
(13/21) (13/21)
(20/21)
IC7601
AUDIO I/O D/A CONV. A/D CONV.
IC7701
MIC AMP
IC8801
CAMERA CONTROL MECHA CONTROL 153 55
IC1201
XREEL HALL ON MT 5V 5 3.1V REG ZM RST LED 1
CN503 4 CN1205 MS VCC 6 2 9
AU 4.6V
AU 4.6V
IC8802
EEPROM
MS-200 BOARD(2/2)
MEMORY STICK Duo CONNECTOR
MS VCC ON AU 2.8V AU 2.8V D 2.8V D 1.9V CAM DO ON CAM DD ON MS VCC ON 131 286
(6/21)
(7/21)
(7/21)
(7/21)
IC8401
HI CONTROL DIGITAL STILL CONTROL
IC8402
EEPROM
IC8403
XTAL OSC
IC8502
16M FLASH MEMORY
(10/21)
(8/21)
(4/21)
(5/21)
(3/21)
CHIME PWR CONT 130
IC6501
RP 4.6V RP 4.6V REC/PB AMP
IC6401
DV SIGNAL PROCESS RF SIGNAL PROCESS
IC6201
DV SIGNAL PROCESS MPEG MOVE PROCESS DIGITAL STILL PROCESS AUDIO SIGNAL PROCESS
IC6202
64Mbit SDRAM
IC5201
CAMERA PROCESS FB8402 FB8501
(7/21)
IC8503
32M SDRAM
(PAGE 3-10) (12/21)

EP 13.5V RP 2.8V A 2.8V A 1.5V D 1.5V USB 3.1V RP 2.8V A 2.8V A 1.5V FB6201 D 1.5V USB 3.1V A 1.2V D 1.2V D 1.9V D2.8V D 2.8V D 2.8V VTR UNREG D 2.8V VTR UNREG A1.2V D1.2V D1.2V USB 3.1V CAP VS DRUM ERROR CAP ERROR DRUM VS 75 77 45 43 64 67
IC9101
CAPSTAN MOTOR DRIVE CAPSTAN FG AMP DRUM MOTOR DRIVE DRUM FG,PG AMP LOADING MOTOR DRIVE REEL FG AMP TAPE TOP,END DET DRUM,CAP ERROR AMP Q8404-8406 CHIME VDD 13 4PIN CONNECTOR MIC902
Q9101 SENSOR VCC 27 T REEL, S REEL SENSOR H901, H902
CHIME PWR CONT

R9120
MT 5V A 4.6V
MT 5V
MT 5V
XREEL HALL ON
TAPE LED A CN9102
19
TAPE LED
D901
CAP VS CAP ERROR DRUM VS DRUM ERROR CAM DO ON CAM 15V CAM -7.5V EP 13.5V CAM 3.1V
A 2.8V D 2.8V A 4.6V D 1.9V
A 2.8V 60 A 4.6V 5 3.4V
(1/21)
IC5001
TIMING GENERATOR
Z MECHA DECK (MDX-Z200) FP-828(FLEXIBLE) CD-490 BOARD

CN201
(1/21)
IC5002
5
CAM 15V
(9/21)
(11/21)
(2/21)
(2/21)
3.4V REG
21 22
10
IC201
CCD IMAGER
IC202
S/H
IC6301
DV INTERFACE
IC7101
VIDEO IN/OUT AGC ACC
IC5102
2.8V REG
IC5101
FOCUS/ZOOM/ IRIS/ND DRIVE
(1/21)
CAM -7.5V 23 CAM 3.1V A 2.8V 19 CN5001 12 9
IC5003
AGC A/D CONV.
4 ZM VCC ZM RST LED Q5101 2.8V MR A2.8V
CN5101 29
ZOOM RESET SENSOR
LENS ASSY
3 FOCUS MR SENSOR
16
3-11
3-12E
DCR-HC40/HC40E
4-2. SCHEMATIC DIAGRAMS 4-3. PRINTED WIRING BOARDS
SECTION 4 PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS

4-1. FRAME SCHEMATIC DIAGRAM (1/2)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
A
29 28 27 26 25 24
CN5101 ZM_VCC
29P
CN1207
8P RF_MON SWP GND XCS_EEP EEP_SCK EEP_SO EEP_SI GND 1 2 3 4 CPC 5 (FOR CHECK) 6 7 8
MAKER_SELECT ZM_GND ZM_OUT I_HALLI_BIASI_DRIVE+ I_DRIVEI_HALL+ I_BIAS+ IR_SW_GND IR_SW_OUT CN1202 8P
23 22 21 20 19 18 17
XLOGO_LED LOGO_LED ND_HALL+ XEASY_LED 16 15 14 13 12 11 10 9 8 ND_BIAS+ EASY_LED_VDD ND_HALLREG_GND ND_BIASKEY_AD3 N_DRIVEBATT_INFO N_DRIVE+ REG_GND FOCUSFOCUS+ ZOOM_B ZOOM_XB ZOOM_XA ZOOM_A LENS_TEMP_OUT MR/TEMP_GND F_MR_VCC F_MR_A F_MR_B CN1201 18P XEJECT_SW XPOWER_SW XMODE_SW N.C. KEY_AD0(SS) N.C. N.C. CHARGE_LED_VDD XCHARGE_LED
8 7 6 5 4 3 2 1
CONTROL KEY BLOCK(CF6300)
LENS UNIT
18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
7 6 5 4 3 2 1
CONTROL KEY BLOCK(SS6300)
E
33 32 31 CN201 26P VSUB RCSUB 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 30 29 28 27 26 25 24 23 22 21 20 19
CN5001 VSUB
33P
XVTR_LED XMEM_LED XCAM_LED
RCSUB MODE_LED_VDD GND REG_GND GND KEY_AD0(PHOTO) V4 D_2.8V V3 ZOOM_VR V2 N.C. V1 GND GND CAM_-7.5V CAM_15V CAM_15V GND A_2.8V CLPDM GND GND CCD_OUT+ CCD_OUTGND XSHP XSHD GND GND H2 H1 LH RG GND GND GND GND
F
CCD IMAGER
GND V4 V3 V2 V1 GND CAM_-7.5V CAM_15V
VC-352 BOARD(1/2)
CN1203
10P SHOE_UNREG SHOE_UNREG LANC_SIG HOTSHOE_ID1 HOTSHOE_ID2 EXT_STROBO SHOE_MIC_GND SHOE_MIC_L 10 9 8 7 6 5 4 3 2 1
A_2.8V CLPDM GND CCD_OUT+ CCD_OUTGND XSHP
FP-828 FLEXIBLE
GND
18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
FP-834 FLEXIBLE
INTELLIGNET ACCESSORY SHOE
SHOE_UNREG_GND SHOE_UNREG_GND
XSHD GND H2 H1 LH RG GND
I
MIC 901 MIC UNIT
CD-490 BOARD
GND
CN601
4P
CN602
16P NS_2.8V XF_TALLY_LED EXT_MIC_L EXT_MIC_GND EXT_MIC_R REG_GND A_4.6V SIRCS_SIG REG_GND XSHUTTER_OPEN 16 15 14 13 12 1 2 3 4 5
CN1204 NS_2.8V
16P
SW_COM/SW_GND MIC/REC_SW_GND
L-CH
1 2 3 4
INT_MIC_L GND INT_MIC_R GND
XCCDOWN_SW
XF_TALLY_LED
TOP/END_GND 27P 27P TAPE_LED_A HALL_GND
XMODE_SW_C
XMODE_SW_B
XMODE_SW_A
10P
XREC_PROOF
LM_UNLOAD
CHIME_VDD
CHIME_SDA
HALL_VCC
TAPE_END
TAPE_TOP
LM_LOAD
LM_LOAD
DRUM_W
DRUM_W
DRUM_U
HE_GND
FG_GND
FG_GND
HE_VCC
FG_VCC
FG_VCC
CN9103
CN9101
M_COM
SREEL+
TREEL+
CAP_W
CAP_W
CAP_W
CAP_W
SREEL-
TREEL-
CAP_U
CAP_U
CAP_U
CAP_U
CN6501
EXT_MIC_GND EXT_MIC_R REG_GND A_4.6V SIRCS_SIG REG_GND XSHUTTER_OPEN NS_LED_A NS_LED_K EXT_MIC_GND INT_MIC_L EXT_MIC_GND INT_MIC_R
DRUM_U
DRUM_V
DRUM_V
R-CH
FG/PG_COM
CHIME_SCK
EXT_MIC_L
LM_UNLOAD
TAPE_LED_K
CAP_V
CAP_V
CAP_V
CAP_V
10P
YEVEN
CN9102
XEVEN 2
WHE+
DEW+
XODD
YODD
WHE-
DEW-
YSDL
XSDL
UHE+
VHE+
UHE-
VHE-
GND
GND
GND
FFC-036 FLAT CABLE
11 10 9 8 7 6 5 4 3 2 1
6 7 8 9 10 11 12 13 14 15 16
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
10
10
J601
NS_LED_A MIC (PLUG IN POWER) NS_LED_K INT_MIC_GND INT_MIC_L INT_MIC_GND INT_MIC_R
TO CAPSTAN MOTOR
TO SENSOR,LOADING MOTOR,MODE SW
TO DRUM MOTOR
TO VIDEO HEAD
IR-051 BOARD L
16
MECHANISM DECK(Z200)
4-1
4-2
FRAME SCHEMATIC DIAGRAM (1/2)
GND
N.C.
FG2
FG1
PG
FG
DCR-HC40/HC40E
4-2. SCHEMATIC DIAGRAMS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
4-3. PRINTED WIRING BOARDS
SE-141 BOARD
22P REG_GND PITCH_AD REG_GND YAW_AD VST_C_RESET A_2.8V CN401 6P 6 5 4 3 2 1 39 38 37 36 35 34 33 32 31 (USB) 30 29 USB GND ID D+ D5 4 3 LANC_SIG 2 XLANC_JACK_IN 3 4 5 6 7 8 9 25 24 23 22 21 20 19 REG_GND LANC_SIG XLANC_JACK_IN REG_GND LANC_DC REG_GND S_Y_I/O S_C_I/O REG_GND AUDIO_L_I/O REG_GND AUDIO_R_I/O REG_GND MULTI_JACK_IN VIDEO_I/O REG_GND REG_GND TPA N.C. REG_GND N.C.(LANC_SIG) AUDIO L 2 TPB 1 NTPB REG_GND D+ DLANC USB_DET J701 23 24 25 26 27 5 4 3 2 1 NTPB 6 REG_GND 5 D+ DUSB_DET CN1208 39P CONTROL KEY BLOCK (SB6300) 4 3 2 1 BL_ON/OFF_SW 2ND_S/S_SW N.C. REG_GND CN602 6P BL_L BL_FB N.C. BL_2.8V CN606 6P 3 4 5 6 N.C. N.C. 2 REG_GND BL_H 1 22 6 TPB 21 7 NTPA 6 CN1212 6P 1 2 3 4 5 6 REG_GND TP_Y TP_SEL1 TP_X VD_SI XCS_LCD VD_SCK VD_SO 15 16 17 18 19 20 21 22 1 REG_GND XLANC_LANC_DC REG_GND TPA DV NTPA TPB NTPB 4P CN703 4 3 2 1 S_Y_IO REG_GND S_C_IO REG_GND AUDIO_L_I/O REG_GND AUDIO_R_I/O S-Y VIDEO IN/OUT VIDEO/AUDIO GND JACK AD AUDIO R A/V IN OUT S-C 5 TPA 19 20 9 8 REG_GND 4 NTPA S GND 3
10 1
CN1206 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
CN601
22P TEST2 RGT B R G PSIG HCK1 HCK2 WIDE TEST1 REF HST PCG XSTBY VSSG N.C. VSS VDD DWN EN VCK VST COS COM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 ND901 BACKLIGHT TOUCH PANEL LCD901 2.5INCH COLOR LCD UNIT
A_2.8V VST_C_RESET YAW_AD REG_GND PITCH_AD REG_GND EXT_MIC_R MIC_GND EXT_MIC_L INT_MIC_R MIC_GND INT_MIC_L MIC_GND REG_GND
PANEL_R PANEL_G PANEL_B REG_GND REG_GND KEY_AD1 EP_2.8V EP_4.6V EP_8.5V BL_-15.5V NS_2.8V PANEL_HD PANEL_VD BL_GND
PANEL_R PANEL_G PANEL_B REG_GND REG_GND KEY_AD1 EP_2.8V EP_4.6V EP_8.5V BL_-15.5V NS_2.8V PANEL_HD PANEL_VD BL_GND SE_GND(REG_GND) TP_Y TP_SEL1 TP_X VD_SI XCS_LCD VD_SCK VD_SO
B
CN704
10 11 12 13 14
FP-835 FLEXIBLE
9 10 11 12 13 14 15 16 17 18 19 20 21 22
27P 1 2
28 27 26
REG_GND
VCC CN702
10 11 12 13 14 15 16 17 18
FP-833 FLEXIBLE
18 17 16 15 14 13 12 11 10
D
10 9 8
PD-213 BOARD
FP-836 BOARD
PANEL REVERS S101
CN605 CN603
24P 6P 1 2 3 4 5
REG_GND MULTI_JACK_IN VIDEO_I/O 7 REG_GND 6 REG_GND N.C.(ANC_DC)
PANEL_RVS_SW PANEL_RVS_SW N.C. N.C. REG_GND
TP_BOT TP_L N.C. TP_TOP TP_R
CN701
JK-260 BOARD VC-352 BOARD(2/2)

20P 26 25 ACV_UNREG ACV_UNREG ACV_UNREG ACV_UNREG ACV_UNREG N.C. ACV_GND ACV_GND ACV_GND ACV_GND ACV_GND BATT/XEXT BATT_GND BATT_GND BATT_GND BATT_GND BATT_GND BATT_GND N.C. BATT_UNREG BATT_UNREG BATT_UNREG REG_GND 4 3 2 1 BATT_UNREG SPBATT_UNREG SP+ BATT_UNREG XRESET BATT_SIG CN2101 26P LI_3V D_2.8V XACCESS_LED REG_GND MS_BS MS_DIO MS_INSERT N.C. 16 15 14 13 12 17 18 19 20 CN9301 LED_K EP_4.6V EVF_GND COM PSIG VR VG VB EN VST REF PCG VCK STB BLK HCK2 HCK1 HST EVF_GND EVF_VDD 20 19 18 17 16 15 14
21P 20 19 18 17 16 15 14 EVF_VDD EVF_GND HST HCK1 HCK2 BLK STB VCK PCG REF VST EN VB VG VR PSIG COM EVF_GND EP_4.6V LED_K 20P CN301
CN302 N.C. VDD VSS VSSG HST HCK2 HCK1 RGT BLK REF STB VST VCK EN PCG VB VR VG CS PSIG COM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 LCD902 COLOR EVF UNIT
G
BT901 (BATTERY TERMINAL)
24 23 22 21 20 19 18
FP-831 FLEXIBLE
13 12 11 10 9 8 7 6 5 4 3 2 1
13 12 11 10 9 8 7 6 5 4 3 2 1
FP-830 FLEXIBLE
J901 DC IN
17 16 15 14 13 12 11 10 9
8 7 6 5
LB-095 BOARD MS-200 BOARD

14 13 12 REG_GND MS_VCC MS_SCLK MS_INSERT MS_DIO MS_BS REG_GND BT501 7 6 5 4 3 2 1 XACCESS_LED D_2.8V LI_3V XRESET SP+ SPREG_GND CN501 14P 1 2 LITHIUM BATTERY (SECONDARY) 3 2 1 N.C. BS GND CN503 CN502 SP+ SP2P SP901 (SPEAKER) 10 9 8 7 6 5 4 GND VCC SCLK N.C. INS N.C. DIO Memory Stick Duo CONNECTOR
FP-832 FLEXIBLE
11 10 9 8 7 6 5 4 3 2 1
11 10 9 8
MS_SCLK N.C. MS_VCC REG_GND KEY_AD2 D_2.8V ZOOM_VR REG_GND 20P CN1205
L
16
4-3
4-4
DCR-HC40/HC40E

Link
CD-490 BOARD (CCD IMAGER) PD-213 BOARD (LCD RGB DRIVE, BACKLIGHT) CONTROL KEY BLOCK (SB6300) LB-095 BOARD (EVF RELAY) SE-141 BOARD (PITCH/YAW SENSOR AMP) JK-260 BOARD (JACK) FP-830 FLEXIBLE BOARD (BAT/DC IN) IR-051 BOARD
(REMOTE COMMANDER RECEIVER, MIC IN)
MS-200 BOARD
(MS CONNECTOR, INDICATOR)
CONTROL KEY BLOCK (SS6300) CONTROL KEY BLOCK (CF6300) FP-836 BOARD (PANEL REVERSE) FP-228/FP-467/FP-826 FLEXIBLE BOARD
COMMON NOTE FOR SCHEMATIC DIAGRAMS
DCR-HC40/HC40E
(ENGLISH)
THIS NOTE IS COMMON FOR SCHEMATIC DIAGRAMS (In addition to this, the necessary note is printed in each block)
(For schematic diagrams) All capacitors are in F unless otherwise noted. pF : Link V or less are not indicated except for electrolytics F. 50 and tantalums. Chip resistors are 1/10 W unless otherwise noted. k=1000 , M=1000 k. Caution when replacing chip parts. New parts must be attached after removal of chip. Be careful not to heat the minus side of tantalum capacitor, Because it is damaged by the heat. Some chip part will be indicated as follows. Example C541 L452 22U 10UH TA A 2520 Kinds of capacitor Temperature characteristics External dimensions (mm) Constants of resistors, capacitors, ICs and etc with XX indicate that they are not used. In such cases, the unused circuits may be indicated. Parts with * differ according to the model/destination. Refer to the mount table for each function. All variable and adjustable resistors have characteristic curve B, unless otherwise noted. Signal name XEDIT EDIT PB/XREC PB/REC 2: non flammable resistor 5: fusible resistor C: panel designation A: B+ Line B: B Line J : IN/OUT direction of (+,) B LINE. C: adjustment for repair. A: VIDEO SIGNAL (ANALOG) A: AUDIO SIGNAL (ANALOG) A: VIDEO/AUDIO SIGNAL (ANALOG) A: VIDEO/AUDIO/SERVO SIGNAL A: SERVO SIGNAL Circled numbers refer to waveforms. (Measuring conditions voltage and waveform) Voltages and waveforms are measured between the measurement points and ground when camera shoots color bar chart of pattern box. They are reference values and reference waveforms. (VOM of DC 10 M input impedance is used) Voltage values change depending upon input impedance of VOM used.) 1. Connection
Pattern box
ENGLISH
JAPANESE
1.0 m
Front of the lens
2. Adjust the distance so that the output waveform of Fig. a and the Fig. b can be obtain.
Yellow
H
Cyan Green White Magenta
A B
A=B
Fig. a (Video output terminal output waveform)
Fig.b (Picture on monitor TV)
When indicating parts by reference number, please include the board name.
Note : The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Note : Les composants identifis par une marque 0 sont critiques pour la scurit. Ne les remplacer que par une pice portant le numro spcifi.
Precautions Upon Replacing CCD imager

The CD-490 board mounted as a repair part is not equipped with a CCD imager. When replacing this board, remove the CCD imager from the old one and mount it onto the new one. If the CCD imager has been replaced, carry out all the adjustments for the camera section. As the CCD imager may be damaged by static electricity from its structure, handle it carefully like for the MOS IC. In addition, ensure that the receiver is not covered with dusts nor exposed to strong light.
4-5
Red Blue
B A
DCR-HC40/HC40E
ENGLISH
JAPANESE
(JAPANESE)
1.0 m
CD-490 CD-490
4-6
DCR-HC40/HC40E
For Schematic Diagram Refer to page 4-65 for printed wiring board.
CD-490 PRINTED WIRING BOARD
1 CD-490 BOARD A
CCD IMAGER
XX MARK:NO MOUNT NO MARK:REC/PB MODE R :REC MODE P :PB MODE
5
5 IC201 qg, qh, qk
6
IC201 ICX457AKF-13 Note VSUB N.C. H2 N.C. H1 LH RG GND V_OUT N.C. V4 V3 V2 V1 VL GND RCSUB N.C. VDD2 VDD
1
7 IC201
CCD IMAGER R-7.4/P0 R-0.3/P0
2
8
Note:Pin No.and index mark of IC201 and IC202 are shown as viewed from the bottom. IC201 is not included in this COMPLETE board.
R201 0
4.8 Vp-p 37 sec
JL201 R1.4 P0 C201 XX R1.7 P0 R1.4 P0 R13.4 P0 JL202 JL203 JL204 JL205 JL206
11 12 13 14 15 16 17 18 19 20
4 IC201 qf
C202 0.1u B
4.2 Vp-p 37 nsec
1 IC201 1, 4
R11.1/P0
8.2 Vp-p
R-0.4/P0.1
3
R-7.3/P0
4
53.6 sec
R-7.8/P0
5
3 IC201 qs
R11.2/P0
7
2 IC201 2, 3
C205 1u B C204 4.7u 25V TA B R205 R8.2 P0 1k R206 12k C207 0.1u B R204 10k
8.2 Vp-p 53.6 sec
B
2.0 Vp-p
9 10
C203 0.1u B CN201 26P GND GND RG LH 26 25 24 23 C206 XX
R12.3/P0
R15.3 P0
53.6 sec
R12.3 P0 0
R7.4 P0
R203 2700
H1 H2 GND XSHD XSHP GND TO VC-352 BOARD(1/21) CN5001 THROUGH THE FP-828 FLEXIBLE CCD_OUTCCD_OUT+ GND CLPDM A_2.8V GND CAM_15V CAM_-7.5V GND V1 V2 V3
22 21 20
Q201 DTC144EMT2L SWITCH IC202 AD80017AJRURL Note
Q202 2SC5096-O/R(TE85L) CLAMP
L202 100uH
IC202
R2.8/P0 CDS
2 1
19
10 11 12 13 14
R0.9/P0 18 R0.4/P0 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 L201 C214 10u 6.3V A TA FB201 0uH C219 0.1u B C213 1u B C209 0.1u B C210 0.1u B R2.0/P0.4 R2.0/P0.1 C208 0.1u B 1.3
SHP SHD GND CCD_IN BYP BYP BYP
CLPDM GND VDD CCDCCD+ GND BYP
2.8
3
R0.6/P1.8
4
R0.6/P1.8
6 5
1.6
7
(PAGE 4-19 OF LEVEL3)
C215 0.1u B
C218 10u 10V A TA
V4 GND RCSUB VSUB
7 IC202 qd, qf
3.7 Vp-p 37 nsec
6 IC202 5
53.6 sec
0.6 Vp-p
16
SIGNAL PATH
VIDEO SIGNAL CHROMA REC PB Y Y/CHROMA
4-7
4-8
CD-490
DCR-HC40/HC40E
PD-213 PRINTED WIRING BOARD
1 PD-213 BOARD A
10
11
12
13
14
Q609 2SA2029T2LQ/R LCD B+ SWITCHING
15
D604 XX
16
17
LCD RGB DRIVE,BACKLIGHT

XX MARK:NO MOUNT NO MARK:REC/PB MODE
L603 0uH C618 2.2u C619 XX C620 XX C621 XX
8.6 C625 XX 8.0
R624 47k
8.7
5 IC602 es
2.8
540 mVp-p
R625 6800 0.1
B
C603 XX C632 XX C604 22u TA AA 4V C605 0.1u B C606 1u B C609 XX C611 10u TA A 10V C617 0.1u B
C630 XX
R636 1k
Q608 DTC144EMT2L INVERTER C631 1u B R637 120k 0 Q610 2SA2029T2LQ/R SWITCHING
D602 EDZ-TE61-5.6B C626 1u B
C624 0.1u B
R634 1M
L601 0uH CN601 22P PANEL_R 1 2
-5.5
C616 C615 C614 PANEL_B REG_GND REG_GND KEY_AD1 EP_2.8V EP_4.6V 3 4 5 6 7 FB601 0uH PANEL_G
0.01u 0.01u 0.01u
C622 4.7u B
CN605
REF B
24P
24
4.7u
COM C0S VST VCK EN DWN VDD VSS N.C. VSSG XSTBY PCG HST REF TEST1 WIDE HCK2 HCK1 PSIG G R B RGT TEST2 (With in Touch Panel) LCD901 2.5INCH COLOR LCD UNIT
7 IC602 ef
C623
R614 10k 0.5%
R618 XX
R620 22k
3 IC602 wa
23 VST VCK 22 21 20 19 18
1.2
2.8
1.8
1.7
1.7
0.3
2.8
1.2
1.4
4.1
2.1
8 9 10
Filter1
COMOUT
BLDET
COMREF
EXTDA
VCC1
RIN
GIN
XLED
THROUGH THE FP-835 FLEXIBLE
NS_2.8V PANEL_HD PANEL_VD BL_GND SE_GND(REG_GND) TP_Y
11 12 13 14 15 16 17 18
5
COMDA
BIN
REF
TO VC-352 BOARD(21/21) CN1206
L602
0uH
6 IC602 ed
H
550 mVp-p
2.2
EN
2.9 Vp-p H
4 IC602 ws
EP_8.5V BL_-15.5V
DWN
36 35 34 33 32 31 30 29 28 27 26 25 17
2.9 Vp-p
PANEL_XHD PANEL_XVD
H
2.9 Vp-p
R613 91k 0.5%

48 47 46 45 44 43 42 41 40 39 38 37
C627 0.1u B XSTBY PCG
16 15
CL603 Filter2 GND1 OPOUT OPIN FVCC SO XCS XSCK SI VDD SCAN HD
XWRT/CLKIN
VP VCC2
13 14 15 16 17 18 19 20 21 22 23 24
2.5 4.6 2.5 2.5 2.5 RB601 10 8 7 5 6 3 4 2 1 CL604
VP VB CL605 VG CL606 VR
14 13 12 11 10
1.2 C610 0.1u B R609 68k VD_SI XCS_LCD VD_SCK

4 3
SIGNAL PATH E
REC PB VIDEO SIGNAL CHROMA Y Y/CHROMA
TP_SEL1 TP_X VD_SI XCS_LCD VD_SCK VD_SO
C612 560p CH
HST REF
R612 XX
1.2 1.4
IC602
LCD RGB DRIVE IC602 CXM3006R-T4
VB VG VR GND2 PWM WIDE VST VDD VCK VSS
19 20 21 22
2.8
VD_SI XCS_LCD 2.8 0 VD_SCK VD_SO
R640 R641
470 470 2.7 2.8 2.8 0
WIDE HCK2 HCK1
9 8 7 6 5 4 3 2 1
2.8 0 0 2.8 1.4 VCK WIDE VST
R610 0 R635 470
VD_SO
2.8 2.8
1 6
VP VG VR VB RGT
F
Q601 XP4211-TXE SWITCH
2.8
Q602 XP4111-TXE SWITCH
2.8 PANEL_XHD PANEL_XVD 2.6
2 IC602 w;
2.8
VXD
XSTBY
XCLR
HCK1
HCK2
EN
CONTROL KEY BLOCK (SB6300)

1 S001 2 3 S002 LCD BACKLIGHT 4 5 6 REC START/STOP
6P REG_GND N.C. 2ND_S/S_SW BL_ON/OFF_SW N.C. REG_GND
CN602
6P REG_GND N.C. 2ND_S/S_SW BL_ON/OFF_SW N.C. REG_GND 1 2 3 4 5 6
2.8
2.8
1.4
1.4
0.2
2.8
C601 XX
2
XSTBY
HCK1
HCK2
R607 1M
EN
0 C613 XX
PCG
RGT
HST
R627 2700
DWN
0 R639 0
C607 0.1u B
D601 MA111-(K8).S0
2.8
2.2
C602 2200p B
0 2.8 R611 100k Q603 2SC5658T2LQ/R RESET
8 IC602 rk
3.1 Vp-p
DWN
PCG
RGT
VSS
HST
3.1 Vp-p H
10 11 12
1 IC602 1
3.1 Vp-p
R603 XX
CN603
6P TP_BOT TP_L 1 2 3 4 5 6 R604 XX R606 220k 0.5% R638 0 R608 47k 0.5% 2.2 1.7 2.8 6
CN606 BL_2.8V N.C. BL_FB BL_L N.C. BL_H
6P
H
TOUCH PANEL Included LCD Panel
N.C. TP_TOP TP_R N.C.
R615 4700
R619 33 0.5%
R623 33 0.5% 2.4 Q607 2SB1218A-QRS-TX
5 4 3 2 1
ND901 BACKLIGHT
Q604 2SC5658T2LQ/R SWITCH IC601

1
NJM12904V (TE2)
8
LND601
Vcc A_OUT B_OUT A_INB_INA_IN+ B_IN+ GND
4.6 C608 0.1u B R642 47k 2.8

5
R617 1k 1.7 0.1 -0.1
2.4 1.7 -0.1 Q606 2SB1218A-QRS-TX
2.2
2
CH_GND
CONTROL KEY BLOCK (SB6300) is replaced as a block. So that this PRINTED WIRING BOARD is omitted. 16
2.4
3
R616 2200
R633 0
IC601
SELECT SWITCH
2.4
C633 4.7u B
R643 47k
Q605 2SC5658T2LQ/R BL ON SW
Q606,607 CURRENT DETECT
PD-213/SB6300
4-9
4-10
DCR-HC40/HC40E
LB-095 BOARD
SE-141 BOARD
1 LB-095 BOARD A
EVF_RELAY
XX MARK:NO MOUNT
6 SIGNAL PATH
VIDEO SIGNAL
D303 E1S35-AW0C7-01-A2 (BACK LIGHT) CN301 20P LED_K EP_4.6V EVF_GND 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 C301 0.1u B C302 1u B D302 EDZ-TE61-5.6B R302 47k R303 33k R304 68k
CHROMA REC PB
Y/CHROMA
COM PSIG VR VG VB TO VC-352 BOARD(15/21) CN9301 THROUGH THE FP-831 FLEXIBLE EN VST REF PCG VCK STB BLK HCK2 HCK1 HST EVF_GND
21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 R305 1M 3 C303 2.2u F 2 1
COM PSIG CS VG VR VB PCG EN VCK VST STB REF BLK RGT HCK1 HCK2 HST VSSG VSS VDD N.C. 21P LCD902 COLOR EVF UNIT
EVF_VDD
CN302
E
16
1 SE-141 BOARD A
3
NO MARK:REC/PB MODE R :REC MODE P :PB MODE
PITCH/YAW SENSOR AMP

XX MARK:NO MOUNT
FB401 0uH 1 Vref SE401 (PITCH SENSOR) GND Vcc 4 2 OUT C401 4.7u B
C404 XX
C410 0.047u B
C413 10u 6.3V R404 10k C414 10u 6.3V
C415 XX R406 XX
C409 0.047u B
R405 1M CN401 1 C416 4.7u B L401 0uH 2 3 4 2

OUT1
6P TO VC-352 BOARD(21/21) CN1208(34 to 39 pin) THROUGH THE FP-833 FLEXIBLE
A_2.8V VST_C_RESET YAW_AD REG_GND PITCH_AD REG_GND
0.7
0.9
1.3
1.3
1.3
1.3
1.3
C402 0.1u B FB402 0uH 1 3 5 7 2 4 6 8 RB401 22k C403 0.1u B
10
GND
9
LIB1
8
LIA1
7
LO1
6
HI1
5
HO1
4
Vref1
3
AM1
1.2
1
PASS
5 6
OUT2
AM2
CRST 2.8
LIB2
LIA2
PITCH/YAW SENSOR AMP
11 12 13 14 15 16 17 18 19 20
R0/P2.8
FB404 0uH
C406 0.047u B
0.6
0.8
1.3
1.3
1.3
1.3
HO2
1.3
1 Vref SE402 (YAW SENSOR) GND 3
2 OUT C408 0.047u B C411 10u 6.3V C412 10u 6.3V C405 4.7u B C407 XX R402 1M
Vcc 4
1.2
R403 10k
16
VCC
LO2
HI2
FB403 0uH
Vref2
IC401
IC401 UPC6756GR-8JG-E2
4-11
4-12
LB-095/SE-141
DCR-HC40/HC40E
JK-260 PRINTED WIRING BOARD
1 JK-260 BOARD A
JACK
XX MARK:NO MOUNT
CN704 USB_DET DD+ REG_GND NTPB
27P 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
D703 1SS357(T3SONY1)
R701 10k
CN702 1 2 1 4 LF701 0uH 3 D701 XX 2 3 4 5 VCC DD+ ID
5P
(USB)
R702 10k
USB GND
TPB REG_GND NTPA TPA REG_GND TO VC-352 BOARD(21/21) CN1208(1 to 33pin) THROUGH THE FP-833 FLEXIBLE REG_GND VIDEO_I/O MULTI_JACK_IN REG_GND AUDIO_R_I/O REG_GND AUDIO_L_I/O REG_GND S_C_IO REG_GND S_Y_IO
CN703 1 2 3 4 NTPB TPB
4P
DV NTPA TPA
D702 NSAD500H-T1-A
CN701 1
10P
AUDIO L N.C(LANC_SIG) S GND N.C(LANC_DC) S-C AUDIO R JACK AD VIDEO/AUDIO GND VIDEO IN/OUT S-Y A/V IN OUT
9 2 8 3 7 4 6 5 5 6 4 7
10
REG_GND XLANC_LANC_DC REG_GND XLANC_JACK_IN LANC_SIG REG_GND
3 8 2 9 1 10
SIGNAL PATH E
REC PB VIDEO SIGNAL CHROMA Y Y/CHROMA AUDIO SIGNAL
3 2 5 1 4 J701 LANC
16
FP-830 FLEXIBLE A
BAT/DC IN
XX MARK:NO MOUNT
CN001 26P BATT_SIG BATT_UNREG BATT_UNREG BATT_UNREG 1 LND002 2 LND003 3 LND004 4 LND005 BATT_UNREG BATT_UNREG BATT_UNREG BATT_GND BATT_GND TO VC-352 BOARD(18/21) CN2101 BATT_GND BATT_GND BATT_GND BATT_GND BATT_GND BATT/XEXT ACV_GND ACV_GND ACV_GND ACV_GND ACV_GND ACV_GND 5 LND006 6 LND007 7 LND008 8 LND009 9 LND010 10 LND011 11 LND012 12 LND013 13 LND014 14 LND015 15 LND016 16 LND017 17 LND018 18 LND019 19 LND020 20 LND021 21 LND022 22 LND023 ACV_UNREG ACV_UNREG ACV_UNREG 23 LND024 24 LND025 25 LND026 26 ACV_UNREG ACV_UNREG J901 DC IN LND001
FP-830 FLEXIBLE is replaced as a block. So that this PRINTED WIRING BOARD is omitted.
C D
BT901 BATTERY TERMINAL
(PAGE 4-53 OF LEVEL 3)
D
16
JK-260/FP-830
4-13
4-14
DCR-HC40/HC40E
For Schematic Diagram Refer to page 4-65 for printed wiring board of IR-051 board. Refer to page 4-73 for printed wiring board of MS-200 board.
IR-051 BOARD
MS-200 BOARD
1 IR-051 BOARD A
REMOTE COMMANDER RECEIVER,MIC IN

XX MARK:NO MOUNT NO MARK:REC/PB MODE
4.6 4 3 VCC GND 1 C602 1u B 14 13 12 11 D604 1SS355TE-17 10 9 8 EXT_MIC_L EXT_MIC_GND EXT_MIC_R REG_GND A_4.6V SIRCS_SIG REG_GND XSHUTTER_OPEN NS_LED_A NS_LED_K INT_MIC_GND INT_MIC_L INT_MIC_GND INT_MIC_R TO VC-352 BOARD(21/21) CN1204 THROUGH THE FFC-036 FLAT CABLE IC601 SBX3055-01 4.6 R604 47 16 15 OUT GND 2 CN602 NS_2.8V XF_TALLY_LED 16P
IC601
REMOTE COMMANDER RECEIVER
B SIGNAL PATH
AUDIO SIGNAL
D601 CL-330IRS-X-TU (NIGHT SHOT)
7 6 5 4 R601 1800
REC PB
D603 XX MIC901 MIC UNIT CN601 L-CH MIC GND INT_MIC_R R-CH MIC GND 1 2 3 4 4 2 3 4P INT_MIC_L 1
D602 TLRMV1021(T15SOY,F) (TALLY)
3 2 1
S601 LENS COVER CPEN/CLOSE 1 3 2 4
J601 MIC (PLUG IN POWER)
FB601
0uH
FB602 0uH
E
LND601 CHASSIS_GND
C601 2200p B
VDR601
VDR602
16
1 MS-200 BOARD A
MS CONNECTOR, INDICATOR
XX MARK:NO MOUNT
CN501 14P REG_GND MS_VCC MS_SCLK MS_INSERT TO VC-352 BOARD(20/21) CN1205 THROUGH THE FP-832 FLEXIBLE MS_DIO MS_BS REG_GND XACCESS_LED D_2.8V LI_3V XRESET SP+ SP1 2 3 4 5 6 7 8 9 10 11 12 13 14 S501 RESET VDR502 XX VDR503 VDR504 XX XX VDR505 XX D501 TLRMV1021(T15SOY,F) (ACCESS) BT501 LITHIUM BATTERY (SECONDARY) R501 100 10 9 8 7 6 5 4 3 2 1 CN503 GND VCC SCLK N.C. INS N.C. DIO N.C. BS GND Memory Stick Duo CONNECTOR 10P
The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Les composants identifis par une marque 0 sont critiques pour la scurit. Ne les remplacer que par une pice portant le numro spcifi.
LND501 CHASSIS_GND
REG_GND
SIGNAL PATH
VIDEO SIGNAL CHROMA Y Y/CHROMA AUDIO SIGNAL
3
VDR501 SURGE
4 2
CN502 2P SP901 (SPEAKER)
REC PB
D
16
1 2
SP+ SP-
4-15
4-16
IR-051/MS-200
DCR-HC40/HC40E
4-2. SCHEMATIC DIAGRAMS 4-3. PRINTED WIRING BOARDS
4
S001 (PANEL OPEN/CLOSE) COM
CONTROL KEY BLOCK(SS6300) FUNCTION KEY

XX MARK:NO MOUNT
18P N.C. ZOOM_VR D_2.8V KEY_AD0(PHOTO) REG_GND 1 LND002 2 LND003 3 LND004 4 LND005 5 LND006 6 LND007 XCAM_LED TO VC-352 BOARD(20/21) CN1201 XMEM_LED XVTR_LED XCHARGE_LED CHARGE_LED_VDD N.C. N.C. 7 LND008 8 LND009 9 LND010 10 LND011 11 LND012 12 LND013 13 LND014 14 LND015 N.C. XMODE_SW XPOWER_SW XEJECT_SW 15 LND016 16 LND017 17 LND018 18 D003 TLGV1021(T15SOY,F) (PLAY/EDIT) D002 TLGV1021(T15SOY,F) (CAMERA_MEMORY) KEY_AD0(SS) D001 TLGV1021(T15SOY,F) (CAMERA_TAPE) MODE_LED_VD0 R001 10k R002 4.9k R003 12.1k S003 PHOTO (FREEZE) S002 PHOTO(REC) LND001 T RV001 50k (ZOOM) W
CONTROL KEY BLOCK(CF6300) FUNCTION KEY

XX MARK:NO MOUNT
8P REG_GND BATT_INFO TO VC-352 BOARD(20/21) CN1202 KEY_AD3 REG_GND EASY_LED_VDD XEASY_LED LOGO_LED XLOGO_LED 1 LND002 2 LND003 3 LND004 4 LND005 5 LND006 6 LND007 7 LND008 8 D001 LND001
DUMMY
DUMMY R001 1500
S002 BACKLIGHT
B
S003 DSPL/BATT INFO
R002 1200
S004
CONTROL KEY BLOCK(CF6300) is replaced as a block. So that this PRINTED WIRING BOARD is omitted.
LND009 CHASSIS_GND
EASY
D002
CONTROL KEY BLOCK(SS6300) is replaced as a block. So that this PRINTED WIRING BOARD is omitted.
D004 CL-270D_C_TS (CHG) S001 REC START/STOP
POWER XPOWER XMODE
E
CHASSIS_GND CHASSIS_GND LND022 LND023
S004 OPEN/ EJECT
16
1 FP-836 BOARD A
PANEL REVERSE
XX MARK:NO MOUNT
6P
FP-836 BOARD is replaced as a block. So that this PRINTED WIRING BOARD is omitted.
LND006 REG_GND 6 LND005 5 LND004 N.C. N.C. PANEL_SW PANEL_SW 4 LND003 3 LND002 2 LND001 1 S101 (PANEL REVERSE) REG_GND
TO VC-352 BOARD(20/21) CN1212
B
16
SS6300/CF6300/FP-836
4-17
4-18
Schematic diagram of the VC-352 board are not shown. Pages from 4-19 to 4-60 are not shown.
DCR-HC40/HC40E
For Schematic Diagram Refer to page 4-79 for flexible wiring board.
FP-467/FP-228/FP-826 FLEXIBLE BOARD
5
TO VC-352 BOARD(12/21) CN9102
7
(PAGE 4-41 of LEVEL 3)
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26 TREEL+
MODE_SW_COM/SW_GND
CHIME_SCK MIC/REC_SW_GND/ XCCDOWN_SW_GND
XMODE_SW_A
XMODE_SW_B
XMODE_SW_C
XREC_PROOF
XCCDOWN_SW
LM_UNLOAD
LM_UNLOAD
CHIME_VDD
CHIME_SDA
TAPE_LED_K
TAPE_LED_A
B
M903 LOADING MOTOR
8P LM_LOAD LM_UNLOAD 1 2 3 4 5 6 7 8 Q901 TAPE END SENSOR H901 S REEL SENSOR + G Vcc -
FP-467
FLEXIBLE
S902 MODE SWITCH
MODE_SW_COM XMODE_SW_A XMODE_SW_B
C FP-228
FLEXIBLE
DEW SENSOR
XMODE_SW_C DEWDEW+
Q902 TAPE TOP SENSOR
Vcc D901 (TAPE LED) S903 (CC DOWN)
D
(4 PIN CONNECTOR)
H902 T REEL SENSOR
FP-826
FLEXIBLE
(REC PROOF)
MIC902
E
16
FP-467/FP-228/FP-826
4-61
4-62
HALL_GND
LM_LOAD
LM_LOAD
END_GND
HALL_VCC
TAPE_TOP
TAPE_END
SREEL+
SREEL-
TREEL-
DEW+
27P
DEW-
27
A
1 2 3 4 5 6 7 8 9
DCR-HC40/HC40E

Link
CD-490 BOARD IR-051 BOARD JK-260 BOARD LB-095 BOARD SE-141 BOARD PD-213 BOARD MS-200 BOARD FP-228/FP-467/FP-826 BOARD
COMMON NOTE FOR PRINTED WIRING BOARDS CIRCUIT BOARDS LOCATION
MOUNTED PARTS LOCATION FLEXIBLE BOARDS LOCATION
NAME CD-490 IR-051 JK-260 LB-095 MS-200 PD-213 SE-141
FUNCTION CCD IMAGER REMOTE COMMANDER RECEIVER, MIC IN JACK EVF RELAY MS CONNECTOR, INDICATOR LCD RGB DRIVE, BACKLIGHT PITCH/YAW SENSOR AMP TIMING GENERATOR, S/H, AGC, A/D CONV., LENS DRIVE, CAMERA PROCESS, MPEG MOVIE/DIGITAL STILL PROCESS, 64Mbit SDRAM, BUFFER, HI/DIGITAL STILL CONTROL, 32Mbit FLASH, 16Mbit SDRAM, DV SIGNAL PROCESS, DV INTERFACE, REC/PB AMP, VIDEO I/O, DRUM/CAPSTAN/LOADING DRIVE,CAMERA/MECHA CONTROL, HI CONTROL, EVF VIDEO, AUDIO I/O, MIC AMP, DC IN, CHARGE, DC/DC CONVERTER, CONNECTOR
VC-352
DCR-HC40/HC40E
(ENGLISH)
THIS NOTE IS COMMON FOR WIRING BOARDS (In addition to this, the necessary note is printed in each block)
(For printed wiring boards) : Uses unleaded solder. : Pattern from the side which enables seeing. (The other layers patterns are not indicated) Through hole is omitted. Circled numbers refer to waveforms. There are a few cases that the part printed on diagram isnt mounted in this model. C: panel designation Chip parts Transistor
C 6 5 4 4 5 6 5 4 4 5
Diode
3 3 3 1 23
1 2 3 3 2 1 1 2 3 3 2 1 1 2 2 1 3 4
2 1
1 2 2 3
1 2 4 4
1 6 54 3 3 4
5 4 3 3 4 5 2
4 5
3 2 1 1 4 6 4
(JAPANESE)
1 3 1 3
BOARD INFORMATION board name CD-490 IR-051 JK-260 LB-095 SE-141 PD-213 MS-200 parts location 4-81 4-81 4-81 4-81 4-82 4-82 2 2 2 2 2 2 2 pattern CSP IC IC2301, IC5001, IC5101, IC5201, IC6201, IC6202, IC6301, IC6401, IC7601, IC8201, IC8401, IC8502, IC8503, IC8801, IC9101 (shown on page) number of layers layers not shown
VC-352
4-83
2 to 7
4-63
DCR-HC40/HC40E
Refer to page 4-63 for common note for printed wiring board.

: Uses unleaded solder.
MOUNTED PARTS LOCATION
CD-490 BOARD(SIDE A)
IC201 is not included in this COMPLETE board.
CD-490 BOARD(SIDE B)
R205
Q202
JL206
C209 C210
FB201
7 +
C215
IC201
2
L201
IC202
6 C218
5
1
10
L202
C201
1-861-17311
1-861-173-
11
16
1
2 1
2
IR-051 BOARD(SIDE A)
S601 LENS COVER OPEN/CLOSE
2
IR-051 BOARD(SIDE B)
C202
C205
Q201
C204
R201
C219
CN201
14
10 15 20
20
15
11
C213 R203 C206
7
C214
C208
JL205
26
4 3
R204 R206 C207
R202
C203
JL204 JL203 JL202 JL201
16
4 3
D604
IC601
4
R604
D601
2 1
CN601
4 1
C602
B
4 1
B
1
CN602
2 FB602
VDR601 C601 R601
D603
C
LND601
FB601 VDR602
16
10
3 J601 MIC (PLUG IN POWER)
C
1-861-17711
D602
1-861-177-
11
16
2
4-65
16
4-66
CD-490/IR-051
DCR-HC40/HC40E

JK-260 BOARD(SIDE A)
A
LANC
DV (USB)
J701
13 10 14 1
11
1 2 3 4
AV IN/OUT
4 1 6
3 5 7
CN703
12
CN701
CN702
1-861-178-
11
JK-260 BOARD(SIDE B)
C
LND702
5 4
LND701 R701 R702
1 3 2
CN704
10 15
LF701
20 26 27
11
E
16
1 5
1-861-178-
3
4-68
D703
D702
D701
JK-260
4-67
DCR-HC40/HC40E
LB-095 BOARD (SIDE A)

CN302
LB-095 BOARD (SIDE B)

D302
R305 C302
K
C303
21 15 20 1 5 10 10
5 1 2 15 20
1-861-17411
R304 R303 C301 R302 A
D303
CN301
1-861-174-
11
SE-141 BOARD(SIDE A)
FB401
C415 R406
SE-141 BOARD(SIDE B)
FB404
11 15 20 C408 R403R402 C416
R404
R405
C414
C413
C404
FB402 C405 C412 C411
IC401
B
1-861-17516
RB401
L401
CN401
C403
C406
C402
10
C409
C410
11
4-69
SE402 (YAW)
FB403
SE401 (PITCH)
C401
C407 +
B
11
16
1-861-175-
4-70
LB-095/SE-141
DCR-HC40/HC40E
PD-213 BOARD
R606 R608
R604
Q604
R638
Q601
Q605
C633
R603
R616
L603
C618
C620
CN601
C619
+ C621
C602
Q602
CN603
C601 C622
C603 C623
L602
R620
R625
L601
7
36 37
5
30
C611
C617
R624 A C624
C630
R613
C604
C610
R609 C612 A
Q609
C625
R640 R641 R610 R635 FB601 C606
R637
C632
45 48
C607 R611
8
5
2
13 12
CL605 CL606 R627
C631
C627 C626
D601
C613
R622 R621
R607
Q603
1-861-17921
16
1
4-71
4
4-72
10
IC602
CL604
Q610
CN605
R612
RB601
40
CL603
D602
25 24 3 20
R634
15
CN602
D604
20
24
PD-213
C609
B
+
C605 R614
R618
R636
Q608
CN606
R639
R643 R642
Q606
Q607
R633
10
15
22
IC601
C608
R617 R619 R615 R623
LND601
C616
C615
C614
+ P
DCR-HC40/HC40E
MS-200 BOARD(SIDE A)
MS-200 BOARD(SIDE B)
14 10
CN501
10
A
12
R501
BT501 LITHIUM BATTERY (SECONDARY)
( MEMORY STICK Duo ) CONNECTOR
VDR503 VDR505 VDR502 VDR504
CN503
VDR501
S501 RESET
12
CN502 D501
1-861-176-
C
LND501
1-861-17616
11
C
11
16
11
Printed wiring board of the VC-352 board are not shown. Pages from 4-75 to 4-78 are not shown.
4-73
4-74
MS-200
DCR-HC40/HC40E

Q902
TAPE TOP SENSOR
FP-826 FLEXIBLE BOARD

H901 S REEL SENSOR H902 T REEL SENSOR S903 (CC DOWN)
27 1
Q901
TAPE END SENSOR (REC PROOF)
1 8
11
1-861-117-
(4 PIN CONNECTOR)
D901
(TAPE LED) MIC902 S902 MODE SWITCH
M902 LOADING MOTOR
DEW SENSOR
11
1-677-049-
1-686-798- 11
FP-228/FP-467/FP-826
4-79
4-80
DCR-HC40/HC40E
4-4. MOUNTED PARTS LOCATION
CD-490 BOARD
* * * * * * * * * * * * * * * C201 C202 C203 C204 C205 C206 C207 C208 C209 C210 C213 C214 C215 C218 C219 B-1 B-1 A-1 B-1 B-2 A-2 A-2 A-2 A-1 A-1 A-2 A-2 B-1 B-1 B-1
no mark : side A * mark : side B JK-260 BOARD

CN701 CN702 CN703 * CN704 * D701 * D702 * D703 J701 B-2 B-4 B-3 E-4 D-4 D-4 D-5 B-1 D-4 D-4 D-5
IR-051 BOARD
C601 C602 C-1 B-1
SE-141 BOARD
C401 * C402 * C403 C404 C405 * C406 * C407 * C408 C409 C410 C411 C412 C413 C414 C415 * C416 A-2 B-2 B-2 A-2 A-2 B-2 A-2 A-2 B-2 B-2 A-2 A-2 A-2 A-2 A-2 A-2
* CN602 B-2 D601 D602 D603 D604 FB601 FB602 IC601 J601 B-2 C-2 C-2 B-1 C-2 C-2 B-2 B-1 C-2 B-1 A-1
* LF701 * R701 * R702
* CN201 A-1 * FB201 IC201 * IC202 * L201 * L202 * Q201 * Q202 * * * * * * R201 R202 R203 R204 R205 R206 B-1 A-1 A-2 A-2 B-2 B-1 A-2 B-1 A-1 A-2 A-2 A-2 A-2 R601 R604 S601 * CN401 B-1 FB401 FB402 * FB403 * FB404 * IC401 * L401 * R402 * R403 R404 R405 R406 A-2 A-2 A-1 A-2 A-2 B-1 A-2 A-2 A-2 A-2 A-2
VDR601 C-2 VDR602 C-2
* RB401 B-2 SE401 * SE402 A-2 A-1
4-81
CD-490/IR-051/JK-260/SE-141
DCR-HC40/HC40E
no mark : side A * mark : side B PD-213 BOARD
C601 C602 C603 C604 C605 C606 C607 C608 C609 C610 C611 C612 C613 C614 C615 C616 C617 C618 C619 C620 C621 C622 C623 C624 C625 C626 C627 C630 C631 C632 C633 CN601 CN602 CN603 CN605 CN606 D601 D602 D604 FB601 IC601 IC602 L601 L602 L603 Q601 Q602 Q603 Q604 Q605 Q606 Q607 Q608 Q609 Q610 B-3 A-3 B-2 B-2 B-2 C-2 C-2 A-3 B-3 B-2 B-3 B-2 C-2 A-2 A-1 A-1 B-3 A-4 A-4 A-4 A-4 B-3 B-3 B-3 B-4 C-4 C-4 B-4 C-4 C-2 A-3 A-2 B-4 B-3 C-2 A-5 C-2 B-4 B-4 C-2 A-3 C-2 B-2 B-3 A-4 A-3 B-3 C-2 A-4 A-4 A-4 A-4 B-4 B-4 C-4 R603 R604 R606 R607 R608 R609 R610 R611 R612 R613 R614 R615 R616 R617 R618 R619 R620 R621 R622 R623 R624 R625 R627 R633 R634 R635 R636 R637 R638 R639 R640 R641 R642 R643 A-1 A-2 A-3 C-2 A-3 B-2 C-2 C-2 B-2 B-2 B-2 A-4 A-4 A-4 B-2 A-4 B-3 C-2 C-2 A-4 B-4 B-4 C-3 A-4 B-4 C-2 B-4 C-4 A-1 A-3 C-2 C-2 A-3 A-3
MS-200 BOARD
BT501 B-4
* CN501 A-5 * CN502 C-3 * CN503 B-2 * D501 * R501 * S501 * * * * * VDR501 VDR502 VDR503 VDR504 VDR505 C-1 B-3 C-5 C-4 B-3 B-3 B-3 B-3
RB601 C-3
Mounted parts location of the VC-352 board is not shown. Pages from 4-83 to 4-84 are not shown.
PD-213/MS-200 4-82E
DCR-HC40/HC40E
NOTE
5. REPAIR PARTS LIST

NOTE: Characters A to Z of the electrical parts list indicate location of exploded views in which the desired part is shown.
Link
EXPLODED VIEWS
OVERALL
CABINET (R) SECTION
LCD SECTION
BAT. EVF SECTION
VC
-35
LENS SECTION
CABINET (L) SECTION
OVERALL (MECHANISM DECK-Z200)
LS CHASSIS BLOCK ASSEMBLY
MECHANICAL CHASSIS BLOCK ASSEMBLY
Link
CD-490 BOARD FP-836 BOARD IR-051 BOARD
ELECTRICAL PARTS LIST

D B A
ACCESSORIES
B D E
JK-260 BOARD LB-095 BOARD MS-200 BOARD
E C E
PD-213 BOARD SE-141 BOARD VC-352 BOARD
DCR-HC40/HC40E
(ENGLISH)
NOTE: -XX, -X mean standardized parts, so they may have some differences from the original one. Items marked * are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. The mechanical parts with no reference number in the exploded views are not supplied. Due to standardization, replacements in the parts list may be different from the parts specified in the diagrams or the components used on the set. CAPACITORS: uF: F COILS uH: H RESISTORS All resistors are in ohms. METAL: metal-film resistor METAL OXIDE: Metal Oxide-film resistor F: nonflammable SEMICONDUCTORS In each case, u: , for example: uA...: A... , uPA... , PA... , uPB... , PB... , uPC... , PC... , uPD..., PD...
(ENGLISH)
When indicating parts by reference number, please include the board name.
(JAPANESE)
(ENGLISH/FRENCH)
(JAPANESE)
0 0
(JAPANESE)
5-1
DCR-HC40/HC40E
5-1. EXPLODED VIEWS

5-1-1. OVERALL SECTION
ns : not supplied
8 16
BAT. EVF section (See page 5-6)
12 9 10
D
16 13
16
Cabinet (L) section (See page 5-8)
C B
11 14
7 3 5
A
ns ns MIC901
VC
-3
52
12
15
Lens section (See page 5-7)

B A C
6 1 4 2
ns
12
D
16
Cabinet (R) section (See page 5-4)
16
Ref. No. 1 2 3 3 3 3 4 5 6 7 8
Part No. 3-057-082-21 A-7112-122-A X-3954-099-1 X-3954-100-1 X-3954-105-1 X-3954-106-1 3-089-771-01 X-3954-215-1 3-078-890-11 3-089-917-01
Description SCREW (M1.7), P2 IR-051 BOARD, COMPLETE PANEL (G) ASSY, F (SILVER)(HC40:J) PANEL (G) ASSY, F (WHITE) (HC40:J) PANEL (G) ASSY, F (SILVER)(EXCEPT HC40:J) PANEL (G) ASSY, F (WHITE) (EXCEPT HC40:J) CUSHION, MICROPHONE RETAINER ASSY, IR SCREW, TAPPING CUSHION (F3)
Ref. No. 9 10 10 11 12 13 14 15 16 MIC901
Part No. 3-089-547-02 3-089-546-11 3-089-546-21 3-941-343-21 3-084-523-11 3-089-541-01 3-091-102-01 3-089-777-01 3-091-481-31 1-542-513-21
Description COVER (L), JACK SHEET, JACK (HC40:J) SHEET, JACK (EXCEPT HC40:J) TAPE (A) SCREW (M1.7 EG LOCK (BLACK)) LID, CPC SHEET, VC ELECTROSTATIC SHEET, SHIELD, VC SCREW MICROPHONE
3-089-543-02 COVER (G), SHOE
5-3
DCR-HC40/HC40E
5-1-2. CABINET (R) SECTION
ns : not supplied
LCD section (See page 5-5)
60 58
ns
A
57 54
A
55 53
56
59
51
52
Ref. No. 51 52 53 54 55 56 57
Part No. 3-080-204-31 3-089-432-01 3-078-890-11 1-478-482-21 3-080-204-01
Description SCREW, TAPPING, P2 BLIND, HINGE SCREW, TAPPING KEY BLOCK, CONTROL (CF6300) SCREW, TAPPING, P2
Ref. No. 58 59 60 60 60 60
Part No. 3-089-565-01 3-941-343-21 X-3954-101-1 X-3954-112-1 X-3954-113-1
Description CUSHION (R), PANEL TAPE (A) CABINET R (G) ASSY (SILVER)(HC40:J) CABINET R (G) ASSY (WHITE) (HC40:J) CABINET R (G) ASSY (SILVER)(EXCEPT HC40:J)
3-082-519-01 FOOT (R), RUBBER 3-089-430-01 SCREW COVER
X-3954-114-1 CABINET R (G) ASSY (WHITE) (EXCEPT HC40:J)
5-4
DCR-HC40/HC40E
5-1-3. LCD SECTION
ns : not supplied
109
111 113 114
108
B
112
LCD901
A B
107 115 106 104 103 102
110
ND901
104
ns
PD
-21
3A
105
101
Ref. No. 101 101 101 101 102 103 104 105 106 107 107
Part No. X-3954-196-1 X-3954-197-1 X-3954-205-1 X-3954-206-1 3-057-082-21 3-941-343-21 3-080-204-21 A-7112-124-A 1-861-188-11 3-089-480-41
Description CABINET (C) ASSY, P (SILVER)(HC40) CABINET (C) ASSY, P (WHITE) (HC40) CABINET (C) ASSY, P (SILVER)(HC40E) CABINET (C) ASSY, P (WHITE) (HC40E) SCREW (M1.7), P2 TAPE (A) SCREW, TAPPING, P2 PD-213 BOARD, COMPLETE FP-835 FLEXIBLE BOARD COVER (C), HINGE (SILVER)
Ref. No. 108 109 110 111 112 113 113 114 115 ND901
Part No. X-3954-070-1 A-7112-125-A 3-089-478-01 3-084-523-11 3-089-483-01 X-3954-069-1 X-3954-084-1 1-478-483-11 3-091-690-01 1-478-462-11
Description HINGE (63) ASSY FP-836 BOARD, COMPLETE COVER (M), HINGE SCREW (M1.7 EG LOCK (BLACK)) CUSHION, PANEL CABINET (M) ASSY, P (EXCEPT HC40:J) CABINET (M) ASSY (J), P (HC40:J) KEY BLOCK, CONTROL (SB6300) SHEET, ADHESIVE,PANEL FLEXIBLE BLOCK, LIGHT GUIDE PLATE (2.5)
3-089-480-51 COVER (C), HINGE (WHITE)
LCD901 8-753-205-50 ACX528AKP-J
5-5
DCR-HC40/HC40E
5-1-4. BAT. EVF SECTION
ns : not supplied
154 152 153 158 163 164 162 158

A
159 167
174 151
165 158
LCD902
166
ns
157
161
168
160 156 155 153
172 173
BT901
169
170
ns
171
J901
Ref. No. 151 152 153 154 155 156 157 158 159 160 161 162 163 164
Part No. 1-861-187-11 1-793-996-11 3-080-204-21 X-3954-076-1 1-861-184-11 3-084-523-11 X-3954-079-1 3-057-082-21 3-089-544-01 3-089-418-01 3-089-414-02 A-7112-264-A 3-089-419-01 3-089-415-01
Description FP-834 FLEXIBLE BOARD CONNECTOR, EXTERNAL (HOT SHOR) SCREW, TAPPING, P2 CABINET UPPER ASSY, VF FP-831 FLEXIBLE BOARD SCREW (M1.7 EG LOCK (BLACK)) VF SLIDE (G) ASSY SCREW (M1.7), P2 LABEL, VF SHEET, VF FLEXIBLE FIXED CABINET (LOWER), VF LB-095 BOARD, COMPLETE CUSHION, LCD GUIDE, LAMP
Ref. No. 165 166 167 168 169 170 171 172 173 174
Part No. 3-089-417-01 3-089-416-01 X-3954-077-1 X-3954-075-2 3-089-377-01 3-078-890-11 1-861-183-11 3-089-378-01 3-089-379-01 3-091-261-01
Description ILLUMINATOR SHEET, PRISM EYE CUP ASSY PANEL ASSY, BT COVER, DC-IN SCREW, TAPPING FP-830 FLEXIBLE BOARD BT TERMINAL BOARD RETAINER SHEET (BT), FLEXIBLE SHEET (HS),RADIATION
BT901 1-780-064-11 BATTERY TERMINAL BOARD J901 1-815-792-11 CONNECTOR, DC-IN (7.2V) LCD902 8-753-208-78 LCX059AKA-J
5-6
DCR-HC40/HC40E
5-1-5. LENS SECTION
213
212
211
IC201
210
209 208 206 207 214 205
204
203
202
201
Be sure to read Precautions upon replacing CCD imager on page 4-5 when changing the CCD imager. 4-6
Ref. No. 201 202 203 204 205 206 207 208
Part No. 3-084-523-11 A-7112-151-A 3-089-525-01 3-080-204-01 3-089-527-01
Description SCREW (M1.7 EG LOCK (BLACK)) SE-141 BOARD, COMPLETE FRAME (G), LENS SCREW, TAPPING, P2 HEAT SINK (G), CD
Ref. No. 209 210 211 212 213 214 IC201
Part No. 3-080-204-21 A-7112-117-A 3-088-645-01 1-788-061-11 A-7112-105-A
Description SCREW, TAPPING, P2 CD-490 BOARD, COMPLETE RUBBER (Z), SEAL FILTER BLOCK, OPTICAL 841A (CZ) BLOCK ASSY
3-089-526-01 SHEET (G), CD RADIATION 1-861-181-11 FP-828 FLEXIBLE BOARD 3-090-165-01 SHEET, RADIATION
3-091-260-01 SHEET, INSULATING, CD A-7112-341-A CCD BLOCK ASSY (1M) (CCD IMAGER) (IC201 is not included in this COMPLETE board.)
5-7
DCR-HC40/HC40E
5-1-6. CABINET (L) SECTION
ns : not supplied
260
258 262 263

C
268 258
SP901
264 252 267
258
Mechanism deck (See page 5-9 to 5-11)
259
269
ns
A
257
ns
B
255
H G F E
ns
ns
258 271 272

H G F E VC B C 2
D A
256 253
MS 0 20
270
ns ns
35
252 251 254
258
BT501
265 266 261
255
271 258
: BT501 (Lithium battery) MS-200 board on the mount position. (See page 4-73)
258
Ref. No. 251 251 252 253 254 255 256 257 258 259 260 260 261
Part No. X-3954-115-2 X-3954-116-2 3-080-204-01 3-089-513-01 A-7112-120-A 3-078-890-11 1-861-185-11 3-078-893-01 3-084-523-11 3-089-510-01
Description CABINET (64) ASSY, G (HC40:J) CABINET (64) ASSY, G (EXCEPT HC40:J) SCREW, TAPPING, P2 SHAFT (REAR), GRIP BELT MS-200 BOARD, COMPLETE SCREW, TAPPING FP-832 FLEXIBLE BOARD 0 PLATE +P2 MAIN EG GRIP M1.7 SCREW (M1.7 EG LOCK (BLACK)) BELT, GRIP
Ref. No. 262 263 264 265 266 267 268 269 270 271 272 272 SP901
Part No. A-7112-123-A 1-861-186-11 X-3954-072-2 3-062-214-01 1-828-833-11 3-089-548-01 3-089-540-01 X-3954-074-2 3-081-221-01 3-089-521-01
Description JK-260 BOARD, COMPLETE FP-833 FLEXIBLE BOARD FRAME ASSY, CS SCREW (M1.4X1.5) CABLE, FLEXIBLE FLAT (FFC-036) SHEET, DRUM KNOB, EJECT FRAME ASSY, MD LABEL (Z) LS SHEET, VC
1-478-481-41 KEY BLOCK, CONTROL (SS6300) (EXCEPT HC40:J) 1-478-481-51 KEY BLOCK, CONTROL (SS6300) (HC40:J) 3-089-520-01 SCREW
A-7112-785-A VC-352 BOARD, COMPLETE (SERVICE)(HC40) A-7113-240-A VC-352 BOARD, COMPLETE (SERVICE)(HC40E) 1-825-260-21 LOUD SPEAKER (1.6CM)
5-8
DCR-HC40/HC40E
5-1-7. OVERALL (MECHANISM DECK-Z200)
ns : not supplied
703
704 711 705 706 710 707 709 708 702 712
707
M901 LS chassis block assembly (See page 5-10)
701
Mechanical chassis block assembly (See page 5-11)
715
716
713
714
Ref. No. 701 702 703 704 705 706 707 708 709 Part No. X-3952-938-7 3-075-097-11 3-079-206-02 X-3952-939-8 3-079-367-01 3-079-215-02 3-085-330-01 3-080-545-01 3-079-364-01 Description GEAR ASSY, GOOSENECK SCREW (M1.4X1.4), SPECIAL HEAD SPRING (POP UP S), TXTENSION COMPARTMENT ASSY, CASSETTE DAMPER, CASSETTE COMPARTMENT SPRING (POP UP T), EXTENSION SCREW, SPECIAL COVER, SENSOR S RETAINER, LS GUIDE Ref. No. 710 711 712 713 714 715 716 M901 Part No. X-3952-937-1 3-079-366-01 X-3953-257-4 A-7095-947-A 3-079-741-02 Description TABLE ASSY, T REEL RELEASE, REEL LOCK PLATE ASSY,RETAINER MD (Z200) SUB ASSY SCREW,DRUM FIXING
3-748-682-01 WASHER, T 3-087-881-01 SHEET, ADHESIVE, FLEXIBLE A-7048-994-A DRUM (DEH-30B-R) (SERVICE)
5-9
DCR-HC40/HC40E
5-1-8. LS CHASSIS BLOCK ASSEMBLY
ns : not supplied
765 762 766

MIC902 Q901
761
763 774
ns
760
D901 FP-826 (Note)
759 758
773
H901 H902 S903 Q902
769 768 764 767 770 771 772
757 756
755
754 753 752
ns
751
Note: FP-826 is included in the LS block assy and is attached to chassis by hot-press. Because installation of FP-826 requires a very high accuracy, FP-826 is not supplied as an independent service parts.
Ref. No. 767 768 769 770 771 772 773 774 S903 MIC902 D901 H901 H902 Q901 Q902 Part No. 3-079-243-02 X-3952-934-1 3-052-062-02 3-079-219-02 3-081-591-01 X-3952-935-3 3-079-237-01 A-7095-403-B 1-529-566-51 1-817-175-12 6-500-652-01 8-719-067-74 8-719-067-74 6-550-672-01 6-550-672-01 Description SPRING (PINCH RETURN), TORSION ARM ASSY, PINCH NUT, TG7 TG7 SPRING, COMPRESSION (TG7) ARM ASSY, TG7 ADJUSTOR, BAND TG2 ARM BLOCK ASSY SWITCH, PUSH (1 KEY)(C.C. DOWN) PIN, CONNECTOR (WITH DETECTION SWITCH) DIODE GL453SE0000F (TAPE LED) ELEMENT, HOLE HW-105A-CDE-T (S REEL) ELEMENT, HOLE HW-105A-CDE-T (T REEL) TRANSISTOR PT4850FJE00F (TAPE END) TRANSISTOR PT4850FJE00F (TAPE TOP)
Ref. No. 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766
Part No. A-7095-402-G 3-079-241-01 3-075-097-11 3-079-246-01 3-079-248-01 3-079-244-01 X-3952-932-1 3-079-245-01 3-079-247-01 3-059-090-11 3-079-242-01 A-7095-951-A 3-079-267-01 3-079-268-01 X-3952-936-2
Description BRAKE (T) BLOCK ASSY PLATE, LS CAM SCREW (M1.4X1.4), SPECIAL HEAD SPRING(RELEASE RACK),EXTENSION POSITIONING(S), CASSETTE SPRING (ULE), EXTENSION BRAKE ASSY, ULE RACK (S), RELEASE BRAKE (S) SCREW (M1.4X2.5), SPECIAL HEAD SPRING, TENSION LS BLOCK ASSY HOLDER (S), SENSOR HOLDER (T), SENSOR TABLE ASSY, S REEL
3-085-330-01 SCREW, SPECIAL
5-10
DCR-HC40/HC40E
5-1-9. MECHANICAL CHASSIS BLOCK ASSEMBLY
ns : not supplied
827
809 806
813
M902
816
S902
822
820
814 811 812 815 829 816 810 819 825 817 808 818 824 826 823 821 830
807
828
805 803
ns
804
802 801
ns
Ref. No. 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817
Part No. 3-079-314-01 3-079-327-01 3-079-323-01 3-079-324-03 X-3952-928-1 3-079-315-01 X-3952-925-1 3-079-320-01 3-079-316-01 3-079-319-01 X-3952-941-1 3-079-321-02 X-3952-940-2 3-079-312-01 3-079-307-02
Description SPRING (EJ), EXTENSION ARM, EJ GEAR, CONVERSION ARM, GL DRIVING GL (S) ASSY ROLLER (S1), LS GUIDE ARM ASSY, LS ROLLER, LS ROLLER (S2), LS GUIDE GEAR, CAM SLIDER ASSY (N), M SPRING (PINCH), EXTENSION PLATE ASSY (N), TG2 CAM SHIELD, MOTOR HOLDER, MOTOR
Ref. No. 818 819 820 821 822 823 824 825 826 827 828 829 830 M902 S902
Part No. 3-079-309-01 X-3952-942-2 3-079-325-01 3-079-295-02 1-677-049-11 3-079-328-01 3-079-326-04 3-079-301-01 3-079-298-01 1-686-798-11 X-3952-927-4 X-3952-930-3 X-3952-929-7 A-7095-396-A 1-477-679-11
Description GEAR, DECELERATION ROLLER ASSY, TG3 RAIL, GUIDE SPRING, TG5 FP-228 FLEXIBLE BOARD (DEW SENSOR) SCREW (M1.4), SPECIAL HEAD SUPPORT, TG7 SPRING (GLT), TORSION GEAR (T), GL FP-467 FLEXIBLE BOARD COASTER (S) ASSY ROLLER ASSY, TG5 COASTER (T) ASSY MOTOR BLOCK ASSY, L (LOARDING) ROTARY, ENCODER (MODE SWITCH)
3-085-330-01 SCREW, SPECIAL 3-079-308-01 SHAFT, WORM
5-11
DCR-HC40/HC40E
EXCEPT J MODEL
Checking supplied accessories.
Make sure that the following accessories are supplied with your camcorder.
Lid Battery Case (3-083-973-01)

Power cord (Main lead) (1) (AUS model) 0 1-696-819-21 Power cord (Main lead) (1) (BR, AEP, EE, NE, E:EXCEPT Saudi Arabia model) 0 1-769-608-11 Power cord (Main lead) (1) (KR model) 0 1-776-985-11 Power cord (Main lead) (1) (CH model) 0 1-782-476-13 Power cord (Main lead) (1) (UK, HK, E:Saudi Arabia model) 0 1-783-374-11 Power cord (Main lead) (1) (US, CND model) 0 1-790-107-22 Power cord (Main lead) (1) (JE model) 0 1-790-732-12 AC adaptor (1) (AC-L25A) (EXCEPT BR model) 0 1-477-534-11 Rechargeable battery pack (1) (NP-FP50) (not supplied)
Wireless Remote Commander (1) (RMT-831) 1-477-898-41
A/V connecting cable (1.5m) (1) 1-823-156-13
USB cable (1) 1-824-382-21
Cleaning cloth (1) 3-073-861-01
Shoe cover (1) 3-089-543-01
Memory Stick Duo (1) (not supplied)
Memory Stick Duo adaptor (1) (not supplied)
CD-ROM (SPVD-012(V) USB Driver) (1) (US,CND model) 3-086-790-01 CD-ROM (SPVD-012 USB Driver) (1) (EXCEPT US, CND model) 3-087-821-01
21-pin adaptor (1) (AEP, UK, EE, NE model) 1-770-783-21
2-pin conversion adaptor (1) (JE model) 1-569-007-12
2-pin conversion adaptor (1) (E, HK model) 1-569-008-12

Note : The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Note : Les composants identifis par une marque 0 sont critiques pour la scurit. Ne les remplacer que par une pice portant le numro spcifi.
Abbreviation CND : Canadian model EE : East European model NE : North European model HK : Hong Kong model AUS : Australian model
CH JE KR BR
: Chinese model : Tourist model : Korea model : Brazlian model
Other accessories
3-087-936-11 MANUAL (PC), INSTRUCTION (ENGLISH) (HC40:US,CND,E,HK,JE/HC40E:AEP,UK,E,HK,AUS,JE) 3-087-936-21 MANUAL (PC), INSTRUCTION (FRENCH) (HC40:CND/HC40E:AEP,E,JE) 3-087-936-31 MANUAL (PC), INSTRUCTION (GERMAN/DUTCH) (HC40E:AEP) 3-087-936-41 MANUAL (PC), INSTRUCTION (SPANISH/PORTUGUESE) (HC40:E,JE/HC40E:AEP) 3-087-936-51 MANUAL (PC), INSTRUCTION (ITALIAN/GREEK) (HC40E:AEP) 3-087-936-61 MANUAL (PC), INSTRUCTION (SWEDISH/RUSSIAN) (HC40E:NE,JE) 3-087-936-71 MANUAL (PC), INSTRUCTION (DANISH/FINNISH) (HC40E:NE) 3-087-936-81 MANUAL (PC), INSTRUCTION (POLISH/CZECH) (HC40E:EE) 3-087-936-91 MANUAL (PC), INSTRUCTION (HUNGARIAN/SLOVAK) (HC40E:EE) 3-087-937-11 MANUAL (PC), INSTRUCTION (ARABIC/PERSIAN) (HC40E:E) 3-087-937-21 MANUAL (PC), INSTRUCTION (TRADITIONAL) (HC40:E,HK/HC40E:HK) 3-087-937-31 MANUAL (PC), INSTRUCTION (SIMPLIFIED) (HC40E:E,CH,JE) 3-087-937-41 MANUAL (PC), INSTRUCTION (KOREAN)(HC40:KR,JE) 3-088-338-21 MANUAL, INSTRUCTION (POLISH/CZECH)(HC40E:EE) 3-088-338-31 MANUAL, INSTRUCTION (HUNGARIAN/SLOVAK) (HC40E:EE) 3-088-339-11 MANUAL, INSTRUCTION (ENGLISH) (HC40:US,CND,E,HK,JE) 3-088-339-21 MANUAL, INSTRUCTION (FRENCH)(HC40:CND) 3-088-339-31 MANUAL, INSTRUCTION (SPANISH/PORTUGUESE) (HC40:E,JE) 3-088-339-41 MANUAL, INSTRUCTION (TRADITIONAL CHINESE) (HC40:E,HK) 3-088-339-51 MANUAL, INSTRUCTION (KOREAN)(HC40:KR,JE) 3-088-340-11 MANUAL, INSTRUCTION (ENGLISH) (HC40E:AEP,UK,E,HK,AUS,JE) 3-088-340-21 MANUAL, INSTRUCTION (FRENCH)(HC40E:AEP,E,JE) 3-088-340-31 MANUAL, INSTRUCTION (SPANISH/PORTUGUESE) (HC40E:AEP) 3-088-340-41 MANUAL, INSTRUCTION (ITALIAN/GREEK)(HC40E:AEP) 3-088-340-51 MANUAL, INSTRUCTION (GERMAN/DUTCH)(HC40E:AEP) 3-088-340-61 MANUAL, INSTRUCTION (SWEDISH/RUSSIAN) (HC40E:NE,JE) 3-088-340-71 MANUAL, INSTRUCTION (DANISH/FINNISH)(HC40E:NE) 3-088-340-81 MANUAL, INSTRUCTION (ARABIC/PERSIAN)(HC40E:E) 3-088-340-91 MANUAL, INSTRUCTION (TRADITIONAL CHINESE) (HC40E:HK) 3-088-341-11 MANUAL, INSTRUCTION (SIMPLIFIED CHINESE) (HC40E:E,CH,JE)
5-12
DCR-HC40/HC40E
J MODEL
5-13
DCR-HC40/HC40E CD-490
Ref. No.
FP-836
IR-051
JK-260
Ref. No. Part No. Description
5-2. ELECTRICAL PARTS LIST

Part No. Description A-7112-117-A CD-490 BOARD, COMPLETE *********************** (IC201 is not included in this COMPLETE board) < CAPACITOR > C202 C203 C204 C205 C207 C208 C209 C210 C213 C214 C215 C218 C219 1-164-004-11 1-107-826-11 1-113-987-11 1-127-573-11 1-125-777-11 1-107-826-11 1-125-777-11 1-125-777-11 1-165-908-11 1-135-259-11 CERAMIC CHIP CERAMIC CHIP TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTAL. CHIP 0.1uF 0.1uF 4.7uF 1uF 0.1uF 0.1uF 0.1uF 0.1uF 1uF 10uF 0.1uF 10uF 0.1uF 10% 10.00% 20.00% 10% 10.00% 25V 16V 25V 16V 10V C601 C602 1-164-939-11 CERAMIC CHIP 1-125-837-91 CERAMIC CHIP < CONNECTOR > CN601 CN602 1-778-507-21 PIN, CONNECTOR (PC BOARD) 4P 1-766-346-21 CONNECTOR, FFC/FPC 16P < DIODE > D601 D602 D604 6-500-512-01 DIODE CL-330IRS-X-TU 6-500-506-01 DIODE TLRMV1021(T15SOY,F) 8-719-988-61 DIODE 1SS355TE-17 < FERRITE BEAD > FB601 FB602 1-500-444-11 FERRITE 1-500-444-11 FERRITE < IC > IC601 8-742-221-00 IC SBX3055-01 < JACK > J601 1-691-737-41 JACK (SMALL TYPE) (MIC (PLUG IN POWER)) < RESISTOR > R601 R604 1-218-956-11 RES-CHIP 1-218-937-11 RES-CHIP < SWITCH > L201 L202 1-400-588-11 INDUCTOR 1-469-528-91 INDUCTOR < TRANSISTOR > Q201 Q202 6-550-119-01 TRANSISTOR 8-729-055-21 TRANSISTOR < RESISTOR > R201 1-218-990-11 SHORT CHIP 0 R203 1-218-958-11 RES-CHIP 2.7K 5% 1/16W R204 1-218-965-11 RES-CHIP 10K 5% 1/16W R205 1-218-953-11 RES-CHIP 1K 5% 1/16W R206 1-218-966-11 RES-CHIP 12K 5% 1/16W ************************************************************ A-7112-125-A FP-836 BOARD, COMPLETE ********************** < SWITCH > S101 1-786-179-31 SWITCH, PUSH (1KEY) (PANEL REVERSE) ************************************************************ D702 D703 6-500-750-01 DIODE NSAD500H-T1-A 8-719-078-02 DIODE 1SS357(T3SONY1) < JACK > A-7112-123-A JK-260 BOARD, COMPLETE ********************** < CONNECTOR > CN701 CN702 CN703 CN704 1-815-794-21 1-794-962-11 1-794-276-11 1-784-421-11 CONNECTOR (MULTIPLE) (AV IN/OUT) CONNECTOR, SQUARE TYPE(USB 5P) (USB) CONNECTOR, SQUARE TYPE 4P ( DV) CONNECTOR, FFC/FPC (ZIF) 27P < DIODE > DTC144EMT2L 2SC5096-O/R(TE85L) 0uH 100uH S601 1-786-148-11 SWITCH, PUSH (1 KEY) (LENS COVER OPEN/CLOSE) < VARISTOR > VDR601 1-801-862-11 VARISTOR, CHIP (1608) VDR602 1-801-862-11 VARISTOR, CHIP (1608) ************************************************************ 1.8K 47 5% 5% 1/16W 1/16W 0uH 0uH 0.0022uF 10.00% 50V 1uF 10% 6.3V A-7112-122-A IR-051 BOARD, COMPLETE ********************** < CAPACITOR >
10.00% 16V 10.00% 10V 10.00% 10V 10% 10V 20.00% 6.3V 10.00% 10V 20.00% 10V 10.00% 16V
1-125-777-11 CERAMIC CHIP 1-104-851-11 TANTAL. CHIP 1-107-826-11 CERAMIC CHIP < CONNECTOR >
CN201
1-818-087-31 CONNECTOR, FFC/FPC (LIF) 26P < FERRITE BEAD >
FB201
1-414-760-21 FERRITE < IC >
0UH
IC201 IC202
A-7112-341-A CCD BLOCK ASSY (1M) (CCD IMAGER) (IC201 is not included in this COMPLETE board) 6-701-755-01 IC AD80017AJRURL < COIL >
Be sure to read Precautions upon replacing CCD imager on page 4-5 when changing the CCD imager. 4-6
J701
1-793-995-11 JACK, SUPER SMALL TYPE ( < LINE FILTER >
LANC)
LF701
1-456-583-11 INDUCTOR
0uH
5-14
DCR-HC40/HC40E JK-260
Ref. No. Part No. Description < RESISTOR > R701 1-218-965-11 RES-CHIP 10K 5% 1/16W R702 1-218-965-11 RES-CHIP 10K 5% 1/16W ************************************************************ A-7112-264-A LB-095 BOARD, COMPLETE ********************** < CAPACITOR > C301 C302 C303 1-125-777-11 CERAMIC CHIP 1-165-908-11 CERAMIC CHIP 1-164-505-11 CERAMIC CHIP < CONNECTOR > CN301 CN302 1-818-046-11 CONNECTOR, FFC/FPC 20P 1-784-420-11 CONNECTOR, FFC/FPC (ZIF) 21P < DIODE > D302 D303 8-719-074-67 DIODE EDZ-TE61-5.6B 6-500-875-01 DIODE E1S35-AW0C7-01-A3 < RESISTOR > R302 1-216-841-11 METAL CHIP 47K 5% 1/16W R303 1-218-971-11 RES-CHIP 33K 5% 1/16W R304 1-218-975-11 RES-CHIP 68K 5% 1/16W R305 1-218-989-11 RES-CHIP 1M 5% 1/16W ************************************************************ A-7112-120-A MS-200 BOARD, COMPLETE *********************** < BATTERY > 0 BT501 1-756-128-11 BATTERY, LITHIUM (SECONDARY) < DIODE > < CONNECTOR > CN501 CN502 CN503 1-691-352-21 CONNECTOR, FFC/FPC (ZIF) 14P 1-778-506-21 PIN, CONNECTOR (PC BOARD) 2P 1-817-913-11 MEMORY STICK DUO CONNECTOR < DIODE > D501 6-500-506-01 DIODE TLRMV1021(T15SOY,F) < RESISTOR > R501 1-218-941-81 RES-CHIP < SWITCH > S501 1-771-138-82 SWITCH, KEY BOARD (RESET) < ABSORBER > VDR501 1-805-043-11 ABSORBER, CHIP SURGE ************************************************************ L601 L602 L603 1-400-588-11 INDUCTOR 1-400-588-11 INDUCTOR 1-400-588-11 INDUCTOR 0uH 0uH 0uH 100 5% 1/16W < COIL > IC601 IC602 D601 D602 8-719-988-61 DIODE 1SS355TE-17 8-719-074-67 DIODE EDZ-TE61-5.6B < FERRITE BEAD > FB601 1-414-760-21 FERRITE < IC > 8-759-693-13 IC NJM12904V(TE2) 8-752-109-72 IC CXM3006R-T4 0uH 0.1uF 1uF 2.2uF 10.00% 10V 10% 10V 16V C602 C604 C605 C606 C607 C608 C610 C611 C612 C614 C615 C616 C617 C618 C622 C623 C624 C626 C627 C631 C633 1-164-939-11 1-125-841-91 1-125-777-11 1-165-908-11 1-125-777-11 1-125-777-11 1-125-777-11 1-104-851-11 1-164-739-11 1-164-943-11 1-164-943-11 1-164-943-11 1-125-777-11 1-125-889-91 1-127-760-11 1-127-760-11 1-125-777-11 1-165-908-11 1-125-777-11 1-165-908-11 Ref. No. Part No.
LB-095
Description
MS-200
PD-213
A-7112-124-A PD-213 BOARD, COMPLETE ********************** < CAPACITOR > CERAMIC CHIP TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.0022uF 22uF 0.1uF 1uF 0.1uF 0.1uF 0.1uF 10uF 560PF 0.01uF 0.01uF 0.01uF 0.1uF 2.2uF 4.7uF 4.7uF 0.1uF 1uF 0.1uF 1uF 4.7uF 10.00% 20.00% 10.00% 10% 10.00% 10.00% 10.00% 20.00% 5.00% 10.00% 10.00% 10.00% 10.00% 10% 10% 10% 10.00% 10% 10.00% 10% 10% 50V 4V 10V 10V 10V 10V 10V 10V 50V 16V 16V 16V 10V 10V 6.3V 6.3V 10V 10V 10V 10V 6.3V
1-127-760-11 CERAMIC CHIP < CONNECTOR >
CN601 CN602 CN603 CN605 CN606
1-816-179-11 1-573-915-11 1-691-344-11 1-785-905-11 1-691-344-11
CONNECTOR, FFC/FPC (ZIF) 22P CONNECTOR, FFC/FPC (ZIF) 6P CONNECTOR, FFC/FPC (ZIF) 6P CONNECTOR, FFC/FPC (ZIF) 24P CONNECTOR, FFC/FPC (ZIF) 6P
5-15
DCR-HC40/HC40E PD-213 SE-141 VC-352

C410 C411 C412 C413 C414 C416 1-119-923-11 CERAMIC CHIP 1-137-710-11 CERAMIC CHIP 1-137-710-11 CERAMIC CHIP 1-137-710-11 CERAMIC CHIP 1-137-710-11 CERAMIC CHIP 1-127-760-11 CERAMIC CHIP < CONNECTOR > CN401 1-766-336-21 CONNECTOR, FFC/FPC 6P < FERRITE BEAD > FB401 FB402 FB403 FB404 1-469-179-21 1-469-179-21 1-469-179-21 1-469-179-21 FERRITE FERRITE FERRITE FERRITE < IC > IC401 R611 R613 R614 R615 R616 R617 R619 R620 R623 R624 R625 R627 R633 R634 R635 R636 R637 R638 R639 R640 R641 R642 R643 1-218-977-11 1-220-206-11 1-208-707-11 1-218-961-11 1-218-957-11 1-218-953-11 1-208-647-11 1-218-969-11 1-208-647-11 1-218-973-11 1-218-963-11 1-218-958-11 1-218-990-11 1-218-989-11 1-218-949-11 1-218-953-11 1-218-978-11 1-216-864-11 1-216-864-11 1-218-949-11 RES-CHIP METAL CHIP METAL CHIP RES-CHIP RES-CHIP RES-CHIP METAL CHIP RES-CHIP METAL CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP METAL CHIP METAL CHIP RES-CHIP 100K 91K 10K 4.7K 2.2K 1K 33 22K 33 47K 6.8K 2.7K 0 1M 470 1K 120K 0 0 470 470 47K 47K 5% 0.5% 0.5% 5% 5% 5% 0.5% 5% 0.5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W RB401 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 8-759-489-19 IC uPC6756GR-8JG-E2 < COIL > L401 1-400-588-11 INDUCTOR < RESISTOR > R402 R403 R404 R405 1-218-989-11 1-218-965-11 1-218-965-11 1-218-989-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP 1M 10K 10K 1M 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 0uH 0uH 0uH 0uH 0uH 0.047uF 10uF 10uF 10uF 10uF 4.7uF 10.00% 10V 20% 6.3V 20% 6.3V 20% 20% 10% 6.3V 6.3V 6.3V
< TRANSISTOR > Q601 Q602 Q603 Q604 Q605 Q606 Q607 Q608 Q609 Q610 8-729-427-42 8-729-427-12 6-550-237-01 6-550-237-01 6-550-237-01 8-729-420-24 8-729-420-24 6-550-119-01 6-550-232-01 6-550-232-01 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR < RESISTOR > R606 R607 R608 R609 R610 1-208-943-11 1-218-989-11 1-208-927-11 1-218-975-11 1-218-990-11 METAL CHIP RES-CHIP METAL CHIP RES-CHIP SHORT CHIP 220K 1M 47K 68K 0 0.5% 5% 0.5% 5% 1/16W 1/16W 1/16W 1/16W XP4211-TXE XP4111-TXE 2SC5658T2LQ/R 2SC5658T2LQ/R 2SC5658T2LQ/R 2SB1218A-QRS-TX 2SB1218A-QRS-TX DTC144EMT2L 2SA2029T2LQ/R 2SA2029T2LQ/R
< COMPOSITION CIRCUIT BLOCK > 1-234-379-21 RES, NETWORK 22KX4 < SENSOR > SE401 1-476-807-41 SENSOR, ANGULAR VELOCITY (PITCH) SE402 1-476-807-31 SENSOR, ANGULAR VELOCITY (YAW) ************************************************************ VC-352 BOARD, COMPLETE ********************** (1005)
1-218-949-11 RES-CHIP 1-218-973-11 RES-CHIP 1-218-973-11 RES-CHIP
< COMPOSITION CIRCUIT BLOCK > RB601 1-234-369-21 RES, NETWORK 10X4 (1005) ************************************************************ A-7112-151-A SE-141 BOARD, COMPLETE ********************** < CAPACITOR > C401 C402 C403 C405 C406 C408 C409 1-127-760-11 1-125-777-11 1-125-777-11 1-127-760-11 1-119-923-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 4.7uF 0.1uF 0.1uF 4.7uF 0.047uF 0.047uF 0.047uF 10% 10.00% 10.00% 10% 10.00% 6.3V 10V 10V 6.3V 10V
Electrical parts list of the VC-352 board are not shown. Pages from 5-17 to 5-25 are not shown.
1-119-923-11 CERAMIC CHIP 1-119-923-11 CERAMIC CHIP
10.00% 10V 10.00% 10V
5-16E
DCR-HC40/HC40E
9-876-703-31
Sony EMCS Co.
86
2004A1600-1 2004.1 Published by DI CS Strategy Div.
ENGLISH
JAPANESE
[Description of main button functions on toolbar of the Adobe Acrobat Reader Ver5.0 (for Windows)]
Toolbar Printing a text

1. Click the Print button . 2. Specify a printer, print range, number of copies, and other options, and then click [OK].
Reversing the screens displayed once

To reverse the previous screens (operation) one by one, click . the To advance the reversed screens (operation) one by one, click the .
Application of printing:
To set a range to be printed within a page, select the graphic and drag on the page to enclose a range to selection tool be printed, and then click the Print button.
Application to the Service Manual:

This function allows you to go and back between circuit diagram and printed circuit board diagram, and accordingly it will be convenient for the voltage check.
Finding a text
1. Click the Find button . 2. Enter a character string to be found into a text box, and click the [Find]. (Specify the find options as necessary)
Moving with link

1. Select either palm tool , zoom tool , text selection tool

To execute find from current page toward the previous pages, select the check box Find Backward and then click the Find.
, or graphic selection tool . 2. Place the pointer in the position in a text where the link exists (such as a button on cover and the table of contents page, or blue characters on the removal flowchart page or drawing . page), and the pointer will change to the forefinger form 3. Then, click the link. (You will go to the link destination.)
Moving with bookmark:

Click an item (text) on the bookmark pallet, and you can move to the link destination. Also, clicking can display the hidden items. (To go back to original state, click ) 3. Open the find dialog box again, and click the [Find Again] and you can find the matched character strings displayed next. (Character strings entered previously are displayed as they are in the text box.)

The parts on the drawing pages (block diagrams, circuit diagrams, printed circuit boards) and parts list pages in a text can be found using this find function. For example, find a Ref. No. of IC on the block diagram, and click the [Find Again] continuously, so that you can move to the Ref. No. of IC on the circuit diagram or printed circuit board diagram successively. Note: The find function may not be applied to the Service Manual depending on the date of issue.
Zooming or rotating the screen display

Zoom in/out Click the triangle button in the zoom control box to select the display magnification. Or, you may click ing in or out. or for zoom-
Switching a page
To move to the first page, click the To move to the last page, click the To move to the next page, click the . . . . Rotate Click rotate tool , and the page then rotates 90 degrees each.
To move to the previous page, click the

The printed circuit board diagram you see now can be changed to the same direction as the set.
ENGLISH
JAPANESE
Reverse
987670331.pdf
Revision History
Ver. 1.0 Date 2004.01 History Official Release Contents S.M. Rev. issued

Sony DCR Hc40

Uploaded by

Copyright:

Available Formats

Sony DCR Hc40

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Sony DCR Hc40

Uploaded by

Copyright:

Available Formats

DCR-HC40/HC40E

US Model Canadian Model Brazilian Model Korea Model Japanese Model

E Model Hong Kong Model Tourist Model

DIGITAL VIDEO CAMERA RECORDER

Video camera recorder

Minimum illumination 7 1x (lux) (F 1.8) 0 lx (lux) (during NightShot plus function)*

Rechargeable battery pack (NP-FP50)

Design and specifications are subject to change without notice.

PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS

REPAIR PARTS LIST

Electrical parts list of the VC-352 board is not shown.

DCR-HC40/HC40E SECTION 1 SERVICE NOTE

TO TAKE OUT A CASSETTE WHEN NOT EJECT (FORCE EJECT)

DC power supply (+4.5Vdc)

DCR-HC40/HC40E SECTION 1 SERVICE NOTE

VC-352 board CN9103 LANC

Adjustment remote commander (RM-95)

CN1206 FP-835 Flexible board (22P) CN9102

Cabinet (R) section

FP-830 Flexible board (26P)

I/F unit for LANC control (J-6082-521-A) AC power adaptor

Adjustment remote commander (RM-95)

NAME CD-490 IR-051 JK-260 LB-095 MS-200 PD-213 SE-141

FP-831 FP-834 FP-828

CONTROL KEY BLOCK (CF6300)

CONTROL KEY BLOCK (SB6300)

CONTROL KEY BLOCK (SS6300)

HELP 01 (disassembly of the Hinge section)

1 Peel off the adhesive surface.

4 FP-835 flexible board

HELP 02 (disassembly of the EVF section)

FP-831 flexible board

VF flexible fixed sheet

FP-831 flexible board

Remove the VF cabinet upper assembly in the direction of the arrow.

Illuminator, Prism sheet and other parts

Screw (M1.7 2.5) silver

DCR-HC40/HC40E SECTION 3 BLOCK DIAGRAMS

JK-260 BOARD(2/4) IC5201

CCD OUT +,-

15 15 16 14 CN5001 IC1701 Y OUT

TPA NTPA TPB NTPB

216 IFI Y0-Y7 | 223

280 281 282 264 265 266 267 272 273

X5001 66MHz : HC40 54MHz : HC40E

MC BUS TO OVERALL BLOCK DIAGRAM (3/4)

248 250 251 238

60 58 112 111 114 157 3

SWP FRRV TRRT TRRV

SPCK 139 47 46 185

IRIS DRIVE +,-

52 95 96 EVF HD EVF VD PANEL R PANEL G PANEL B VD SO,SCK PANEL HD PANEL VD DO-D15

IRIS HALL +,-

J11 K11 H12

215 D0-D15 | 198

EVF R EVF G EVF B

EVF HD EVF VD PANEL R PANEL G PANEL B

TO OVERALL BLOCK DIAGRAM (2/4)

K2 L2 B1 C4 FOCUS MOTOR DRIVE K12 SPCK (IC6201) IC7101 C OUT